Tp link tl r860 инструкция на русском

  • Contents

  • Table of Contents

  • Bookmarks

Quick Links

TL-R860

Cable/DSL Router

Rev: 1.1.0

19100100342

loading

Related Manuals for TP-Link TL-R860

Summary of Contents for TP-Link TL-R860

  • Page 1
    TL-R860 Cable/DSL Router Rev: 1.1.0 19100100342…
  • Page 2
    Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

  • Page 3: Fcc Statement

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 4: Table Of Contents

    CONTENTS Package Contents………………1 Chapter 1. Introduction …………….2 Overview of the Router ………………. 2 Features ………………….2 Panel Layout ………………..3 1.3.1 The Front Panel………………3 1.3.2 The Rear Panel ………………3 Chapter 2. Connecting the Router …………5 System Requirements ………………5 Installation Environment Requirements…………

  • Page 5
    Static Routing ………………..37 IP QoS………………….38 4.10 IP & MAC Binding Setting …………….39 4.10.1 Binding Setting ………………. 39 4.10.2 ARP List………………..41 4.11 Dynamic DNS………………..42 4.11.1 Dyndns.org DDNS …………….42 4.11.2 Oray.net DDNS………………. 42 4.11.3 Comexe.cn DDNS …………….43 4.12 System Tools………………..

  • Page 6: Package Contents

    Package Contents The following contents should be found in your package: One TL-R860 Cable/DSL Router One Power Adapter for TL-R860 Cable/DSL Router Quick Installation Guide One Resource CD for TL-R860 Cable/DSL Router, including: • This Guide • Other Helpful Information Note: Make sure that the package contains the above items.

  • Page 7: Chapter 1. Introduction

    Cable/DSL Router will allow you to connect your network better than ever, sharing Internet Access, files and fun, easily and securely. The TL-R860 Cable/DSL Router provides flexible access control so that parents or network administrators can establish restricted access policies for children or staff. It has built-in NAT and DHCP server supporting static IP address distributing.

  • Page 8: Panel Layout

    1.3 Panel Layout 1.3.1 The Front Panel The front panel of the TL-R860 consists of several LED indicators, which is designed to indicate connections. Viewed from left to right. Table 1-1 describes the LEDs on the front panel of the router.

  • Page 9
    TL-R860 Cable/DSL Router User Guide Figure 1-2 Rear Panel sketch — 4 -…

  • Page 10: Chapter 2. Connecting The Router

    TL-R860 Cable/DSL Router User Guide Chapter 2. Connecting the Router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable modem that has an RJ45 connector (It’s not necessary if you connect the router to Ethernet) Each PC on the LAN needs a working Ethernet Adapter and an Ethernet cable with…

  • Page 11
    TL-R860 Cable/DSL Router User Guide Figure 2-1 Hardware Installation of the TL-R860 Cable/DSL Router — 6 -…

  • Page 12: Chapter 3. Quick Installation Guide

    3.1 TCP/IP configuration The default IP address of the TL-R860 Cable/DSL Router is 192.168.1.1, and the default Subnet Mask is 255.255.255.0. These values can be seen from the LAN, and can be changed as your desire.

  • Page 13: Quick Installation Guide

    3.2 Quick Installation Guide ® With a Web-based (Internet Explorer or Netscape Navigator) utility, the TL-R860 Cable/DSL Router is easy to configure and manage. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a web browser.

  • Page 14
    TL-R860 Cable/DSL Router User Guide After a moment, a login window will appear similar to that shown in Figure 3-4. Enter admin for the User Name and Password, both in lower case letters. Then click the OK button or press the Enter key.
  • Page 15
    TL-R860 Cable/DSL Router User Guide Figure 3-7 Quick Setup — PPPoE User Name and Password — Enter the User Name and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP.

  • Page 16: Chapter 4. Configuring The Router

    TL-R860 Cable/DSL Router User Guide Chapter 4. Configuring the Router This chapter describes each web page’s key functions. 4.1 login After your successful login, you can configure and manage the router. There are eleven main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus.

  • Page 17: Quick Setup

    TL-R860 Cable/DSL Router User Guide Figure 4-1 Router Status 4.3 Quick Setup Please refer to Section 4.2: «Quick Installation Guide.» 4.4 Network Figure 4-2 the Network menu — 12 -…

  • Page 18: Lan

    TL-R860 Cable/DSL Router User Guide There are three submenus under the Network menu (shown in Figure 4-2): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

  • Page 19
    TL-R860 Cable/DSL Router User Guide Figure 4-4 WAN — Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP. Click the Release button to release the IP parameters.
  • Page 20
    TL-R860 Cable/DSL Router User Guide If you are also given a user name and a password for 802.1x authentication, you should select 802.1x + Dynamic IP for WAN Connection Type, a user name and a password will then appear, shown in Figure 4-5: Figure 4-5 WAN — 802.1X + Dynamic IP…
  • Page 21
    TL-R860 Cable/DSL Router User Guide Primary DNS — (Optional) Type the DNS address provided by your ISP. Secondary DNS — (Optional) Type another DNS address provided by your ISP if provided. If you are also given a user name and a password for 802.1x authentication, you should select 802.1x + Static IP for WAN Connection Type, a box will then appear…
  • Page 22
    TL-R860 Cable/DSL Router User Guide connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button.

  • Page 23: Mac Clone

    TL-R860 Cable/DSL Router User Guide Figure 4-9 PPPoE Advanced Settings Packet MTU — The default MTU size is 1480 bytes, which is usually fine. For some ISPs, you need modify the MTU. This should not be done unless you are sure it is necessary for your ISP.

  • Page 24: Dhcp

    TL-R860 Cable/DSL Router User Guide Figure 4-10 MAC Address Clone Some ISPs require that you register the MAC address of your adapter, which is connected to your cable, DSL modem or Ethernet during installation. You do not generally need to change anything here.

  • Page 25: Dhcp Settings

    TL-R860 Cable/DSL Router User Guide 4.5.1 DHCP Settings The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN. The DHCP Server can be configured on the page (shown in Figure 4-12): Figure 4-12 DHCP Settings DHCP Server — Enable or Disable the DHCP server.

  • Page 26: Dhcp Clients List

    TL-R860 Cable/DSL Router User Guide 4.5.2 DHCP Clients List This page shows Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the router (Figure 4-13): Figure 4-13 DHCP Clients List Index — The index of the DHCP Client…

  • Page 27: Forwarding

    TL-R860 Cable/DSL Router User Guide Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and IP address of the computer you wish to add. Click the Save button when finished. Figure 4-15 Add or Modify an Address Reservation Entry To modify or delete an existing entry: Click the Modify in the entry you want to modify.

  • Page 28: Virtual Servers

    TL-R860 Cable/DSL Router User Guide 4.6.1 Virtual Servers Virtual servers can be used for setting up public services on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all requests from the Internet to this service port will be redirected to the computer specified by the server IP.

  • Page 29: Port Triggering

    TL-R860 Cable/DSL Router User Guide Figure 4-18 Add or Modify a Virtual Server Entry Note: It is possible that you have a computer or server that has more than one type of available service. If so, select another service, and enter the same IP Address for that computer or server.

  • Page 30
    TL-R860 Cable/DSL Router User Guide Figure 4-19 Port Triggering Once configured, operation is as follows: 1. A local host makes an outgoing connection using a destination port number defined in the Trigger Port field. 2. The router records this connection, opens the incoming port or ports associated with this entry in the Port Triggering table, and associates them with the local host.

  • Page 31: Dmz

    TL-R860 Cable/DSL Router User Guide Figure 4-20 Add or Modify a Triggering Entry There are many popular applications in the Popular Application list. You can select it, and the application will fill in the Trigger Port, Incoming Ports Range boxes and select the Enable checkbox.

  • Page 32: Upnp

    TL-R860 Cable/DSL Router User Guide Figure 4-21 DMZ To assign a computer or server to be a DMZ server: Click the Enable radio button Enter the local host IP Address in the DMZ Host IP Address field Click the Save button.

  • Page 33: Security

    TL-R860 Cable/DSL Router User Guide Internal Port — Internal port, which the router opened for local host. • IP Address — The UPnP device that is currently accessing the router. • Status — Either Enabled or Disabled, “Enabled” means that port is still active.

  • Page 34: Ip Address Filtering

    TL-R860 Cable/DSL Router User Guide Figure 4-24 Firewall Settings Enable Firewall — the general firewall switch is on or off. Enable IP Address Filtering — set IP Address Filtering is enabled or disabled. There are two default filtering rules of IP Address Filtering, either Allow or Reny passing through the router.

  • Page 35
    TL-R860 Cable/DSL Router User Guide Figure 4-25 IP Address Filtering To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up an IP Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on the Firewall page, and click the Add New… button. The page » Add or Modify an IP Address Filtering entry «…

  • Page 36: Domain Filtering

    TL-R860 Cable/DSL Router User Guide WAN IP Address — Type a WAN IP address or a range of WAN IP addresses in the field. For example, 61.145.238.6 – 61.145.238.47. Keep the field open, which means all WAN IP addresses have been put into the field.

  • Page 37
    TL-R860 Cable/DSL Router User Guide Figure 4-27 Domain Filtering Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable Domain Filtering have been selected on the Firewall page. To Add a Domain filtering entry, click the Add New… button. The page » Add or Modify a Domain Filtering entry «…

  • Page 38: Mac Address Filtering

    TL-R860 Cable/DSL Router User Guide For example: if you want to block the PCs on your LAN from accessing websites www.xxyy.com.cn, www.aabbcc.com and websites with .net in the end on the Internet Filtering while no limit for other websites. First, enable the Firewall and Domain…

  • Page 39: Remote Management

    TL-R860 Cable/DSL Router User Guide Type the description of the PC in the Description field. Fox example: John’s PC. Status — Select Enabled or Disabled for this entry on the Status pull-down list. Click the Save button to save this entry.

  • Page 40: Advanced Security

    TL-R860 Cable/DSL Router User Guide Remote Management IP Address — This is the current address you will use when accessing your router from the Internet. The default IP address is 0.0.0.0. It means this function is disabled. To enable this function, change the default IP Address to another IP Address as desired.

  • Page 41
    TL-R860 Cable/DSL Router User Guide Enable ICMP-FLOOD Attack Filtering — Enable or Disable the ICMP-FLOOD Attack Filtering. ICMP-FLOOD Packets threshold: (5 ~ 3600) — The default value is 50. Enter a value between 5 ~ 3600 packets. When the current ICMP-FLOOD Packets numbers are beyond the set value, the router will start up the blocking function immediately.

  • Page 42: Static Routing

    TL-R860 Cable/DSL Router User Guide Click the Clear All button to clear all displayed entries. After the table is empty the blocked host will regain the capability to access the Internet. Click the Return button to return to the Advanced Security page 4.8 Static Routing…

  • Page 43: Ip Qos

    TL-R860 Cable/DSL Router User Guide Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. Modify the information. Click the Save button. Click the Enable All button to make all entries enabled.

  • Page 44: Ip & Mac Binding Setting

    TL-R860 Cable/DSL Router User Guide Mode – There are 2 types of mode: Minimum Bandwidth Guarantee and Maximum Bandwidth Limit. Bandwidth – Specifies the bandwidth you want to supply to this entry. Description – Description of this entry. Enable – Enable this entry. This entry won’t be effective unless you check the Enable box.

  • Page 45
    TL-R860 Cable/DSL Router User Guide Figure 4-38 IP & MAC Binding Setting • MAC Address — The MAC address of the controlled computer(s) in the LAN. • IP Address — The assigned IP address of the controlled computer(s) in the LAN.

  • Page 46: Arp List

    TL-R860 Cable/DSL Router User Guide Figure 4-40 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 4.10.2 ARP List To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address in the ARP list, and you can also configure the items in the ARP list.

  • Page 47: Dynamic Dns

    TL-R860 Cable/DSL Router User Guide 4.11 Dynamic DNS The router offers a Dynamic Domain Name System (DDNS) feature. DDNS allows you to assign a fixed host and domain name to a dynamic Internet IP Address. It is useful when you are hosting your own website, FTP server, or other server behind the router. Before using this feature, you need to sign up for DDNS service providers such as www.dyndns.org,…

  • Page 48: Comexe.cn Ddns

    TL-R860 Cable/DSL Router User Guide Figure 4-43 Oray.net DDNS Settings To set up for DDNS, follow these instructions: Type the User Name for your DDNS account. Type the Password for your DDNS account. Click the Login button to login the DDNS service.

  • Page 49: System Tools

    TL-R860 Cable/DSL Router User Guide Figure 4-44 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: Type the domain names your dynamic DNS service provider gave. Type the User Name for your DDNS account. Type the Password for your DDNS account.

  • Page 50: Time

    TL-R860 Cable/DSL Router User Guide There are nine submenus under the System Tools menu (shown in Figure 4-45): Time, Diagnostic, Firmware, Factory Defaults, Backup & Restore, Reboot, Password, SysLog and Statistics. Click any of them, and you will be able to configure the corresponding function.

  • Page 51: Diagnostic

    System (DNS) queries. IP Address/Domain Name — Type the destination IP address (such as 202.108.22.5) or Domain name (such as http://www.tp-link.com). Number of Pings — The number of Ping packets for a Ping connection. Ping Size — The size of Ping packet.

  • Page 52: Firmware

    When you upgrade the router’s firmware, you may lose its configuration settings, so make sure you write down the router settings before you upgrade its firmware. To upgrade the router’s firmware, follow these instructions: Download the latest firmware upgrade file from the TP-LINK website (www.tp-link.com). — 47 -…

  • Page 53: Factory Defaults

    TL-R860 Cable/DSL Router User Guide Run a TFTP Server on a PC on your LAN, and take the file in the TFTP server’s path. Type the downloaded file name into the File Name box. Type the IP address of the PC that runs the TFTP server in the TFTP Server’s IP Address field.

  • Page 54: Reboot

    TL-R860 Cable/DSL Router User Guide Click the Backup button to save all configuration settings as a backup file in your local computer. To restore the router’s configuration, follow these instructions: • Click the Browse button to select the backup file which you want to restore.

  • Page 55: Syslog

    TL-R860 Cable/DSL Router User Guide Figure 4-53 Password It is strongly recommended that you change the factory default user name and password of the router. All users who try to access the router’s web-based utility will be prompted for the router’s user name and password.

  • Page 56: Statistics

    TL-R860 Cable/DSL Router User Guide 4.12.9 Statistics The Statistics page (shown in Figure 4-55) displays the network traffic of each PC on LAN, including total traffic and traffic of the last Packets Statistic Interval seconds. Figure 4-55 Statistics Current Statistics Status — Enable or Disable. The default value is disabled. To enable, click the Enable button.

  • Page 57: Appendix A: Faq

    TL-R860 Cable/DSL Router User Guide Appendix A: FAQ How do I configure the router to access Internet by ADSL users? First, configure the ADSL modem configured in RFC1483 bridge model. Connect the Ethernet cable from your ADSL modem to the WAN port on the router.

  • Page 58
    TL-R860 Cable/DSL Router User Guide How do I configure the router to access Internet by Ethernet users? Login to the router, click the “Network” menu on the left of your browser, and click «WAN» submenu. On the WAN page, select “Dynamic IP” for «WAN Connection Type», finish by clicking “Save”.
  • Page 59
    TL-R860 Cable/DSL Router User Guide A-5 Add or Modify a Virtual server Entry Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. How to enable DMZ Host: Login to the router, click the “Forwarding” menu on the left of your browser, and click «…
  • Page 60
    TL-R860 Cable/DSL Router User Guide Figure A-7 Remote Management Note: If the above configuration takes effect, to configure to the router by typing http://192.168.1.1:88 (the router’s LAN IP address: Web Management Port) in the address field of the web browser.

  • Page 61: Appendix B: Configuring The Pcs

    TL-R860 Cable/DSL Router User Guide Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.

  • Page 62
    TL-R860 Cable/DSL Router User Guide Figure B-57 The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below: Setting IP address automatically…
  • Page 63
    TL-R860 Cable/DSL Router User Guide Figure B-58 Setting IP address manually Select Use the following IP address radio button. And the following items available If the router’s LAN IP address is 192.168.1.1, type IP address is 192.168.1.x (x is from 2 to 254), and Subnet mask is 255.255.255.0.
  • Page 64
    TL-R860 Cable/DSL Router User Guide Figure B-4 Now: All the configurations are finished; it will take effect after reboot your computer. — 59 -…

  • Page 65: Appendix C: Specifications

    TL-R860 Cable/DSL Router User Guide Appendix C: Specifications General Standards IEEE 802.1x, IEEE 802.3, IEEE 802.3u, IEEE 802.3x Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Ports One 10/100M Auto-Negotiation WAN RJ45 port. Eight 10/100M Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX…

  • Page 66: Appendix D: Glossary

    TL-R860 Cable/DSL Router User Guide Appendix D: Glossary DDNS (Dynamic Domain Name System) — The capability of assigning a fixed host and domain name to a dynamic Internet IP address. DHCP (Dynamic Host Configuration Protocol) — A protocol that automatically configure the TCP/IP parameters for the all the PCs that are connected to a DHCP server.

Источник

  1. Инструкции и руководства
  2. Бренды
  3. TP-LINK
  4. TL-R860
  5. Справочник Пользователя

TP-LINK

Источник

Утилита

EasySetupAssistant

 Загрузить
Дата публикации: 2010-05-19 Язык: Английский Размер файла: 8.733 MB

Операционная система : Windows 2000/XP/2003/Vista/7

Видео по настройке

  • Что делать, если нет доступа в интернет при использовании DSL-модема и роутера TP-Link?

  • Не получается выйти в интернет?

    Пошаговое описание решения проблемы.

    Больше
    Меньше

Как обновить прошивку

Обновление программного обеспечения (прошивки) способно решить проблемы предыдущих версий прошивки и улучшить работу устройства. Во избежание возникновения проблем при обновлении ознакомьтесь со следующей информацией.

Проверьте соответствие аппаратной версии и версии прошивки — установка неверной версии может привести к неисправности устройства и аннулировать гарантию (обычно версия 1.x = версия 1). Как узнать аппаратную версию устройства?

Не рекомендуется устанавливать прошивку, предназначенную для другого региона. Нажмите здесь для выбора региона и загрузите последнюю версию прошивки.

Отключение питания во время обновления прошивки может привести к неисправности устройства.

Обновляйте прошивку роутера по Wi-Fi только тогда, когда это является единственно возможным способом.

Перед обновлением рекомендуется закрыть на компьютере все программы, для работы которых требуется интернет-подключение, или просто отсоединить сетевой кабель от устройства.

Перед выполнением обновления файл с прошивкой необходимо извлечь из архива с помощью архиватора (например, WinRAR или WinZIP).

Рекомендации по обновлению прошивки: Wi-Fi роутер, Wi-Fi роутер с модемом ADSL2+, усилитель Wi-Fi сигнала.

Больше
Меньше

TL-R860_v5_120308_RU

 Загрузить
Дата публикации: 2012-03-08 Язык: Английский Размер файла: 707 KB

Modifications and Bug Fixes:

  1. Support Dual Access and IGMP Snooping

Notes:

For TL-R860 hardware version 5 only.

TL-R860_V5_100519

 Загрузить
Дата публикации: 2011-01-25 Язык: Английский Размер файла: 704.331 KB

Modifications and Bug Fixes:

  1. First firmware for V5 hardware version

Notes:

For TL-R860 V5

Использование стороннего ПО на устройствах TP-Link

Официальное программное обеспечение устройств TP-Link может быть заменено на стороннее, например, на DD-WRT. Компания TP-Link не обязана предоставлять сервисную или техническую поддержку для устройств со сторонним ПО и не гарантирует стабильность его работы. Ущерб, нанесённый устройству в результате использования стороннего ПО, приведёт к аннулированию гарантии.

Открытый исходный код для программистов (GPL)

Следующая информация предназначена для программистов и не представляет особой значимости для большинства конечных пользователей продукции TP-Link.

Продукция TP-Link содержит код, разработанный третьими лицами, включая код, разработанный в соответствии с универсальной общественной лицензией GNU (GPL) версий 1–3 или в соответствии со универсальной общественной лицензией ограниченного применения GNU (LGPL). Вы можете использовать соответствующее программное обеспечение на условиях лицензии GPL.

Ознакомиться, распечатать и загрузить соответствующие условия лицензии GPL можно здесь. В центре исходных кодов GPL можно скачать исходный код GPL соответствующего ПО, используемого в продукции TP-Link, а также прочую информацию, включая список ПО TP-Link, содержащего исходный код GPL.

Источник
  • Страница 1

    […]

  • Страница 2

    COPYRIGHT & TRADEMARKS S pecifications ar e subject to change without notice. is a registered trademark of TP-LINK T echnologies Co., Lt d. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specificatio ns may be reproduced in any form or by any means or used to make any derivativ[…]

  • Страница 3

    SAFETY NOTICES Caution: Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.[…]

  • Страница 4

    COMMENT Package cont ent s ……………………………………………………………………………… 1 Chapter 1. About this Guide ………………………………………………………………. 2 1.1 Purpos es …………………………………………………………………………………………… 2 1.2 […]

  • Страница 5

    5.7.2 IP Address F ilterin g …………………………………………………………………. 30 5.7.3 Domain Filt ering ……………………………………………………………………… 32 5.7.4 MAC Filter ing ………………………………………………………………………….. 33 5.7.5 Remote Ma nagem[…]

  • Страница 6

    TL-R860 Cable/DSL Router User Guide Package contents The following contents should be found in your box: ¾ One TL-R860 Cable/DSL Router ¾ One AC power Adapter for TL-R860 Cable/DSL Router ¾ Quick Install ation Guide ¾ One Resource CD for TL-R860 Cable/DSL Router , including: • This Guide • Other Helpful Information Note: If any of the liste[…]

  • Страница 7

    TL-R860 Cable/DSL Router User Guide Chapter 1. About this Guide Thank you for choosing the TL -R860 Cable/DSL Router . This router provides dedicated solutions for Small Office/Home Of fice (S OHO) networks. With your network all connected, your local network can share Internet access, f iles and fun for multiple PCs through one ISP account. It is […]

  • Страница 8

    TL-R860 Cable/DSL Router User Guide Chapter 2. Introduction 2.1 Overview of the Router The TL-R860 Cable/DSL Router integrates an 8- p or t s wi t c h, firewall, and NA T -router . Its design is dedicated to Small Office/H ome Offi ce (SOHO) netw ork solutions. The TL-R860 Cable/DSL Router will allo w you to connect your network better than ever , […]

  • Страница 9

    TL-R860 Cable/DSL Router User Guide 2.3 Panel Layout 2.3.1 The Front Panel The front panel of the TL-R86 0 consists of several LED i ndicators, which is designed to indicate connections. V iewed from left to right. T able 2-1 describes the LEDs on the front panel of the router . Figure 2-1 Front Panel sketch Name Action Description Not lit No power[…]

  • Страница 10

    TL-R860 Cable/DSL Router User Guide Figure 2-2 Rear Panel sketch — 5 -[…]

  • Страница 11

    TL-R860 Cable/DSL Router User Guide Chapter 3. Connecting the Router 3.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Et hernet) ¾ One DSL/Cable modem that has an RJ45 co nnector (It’s not necessary if you connect the router to Ethernet) ¾ Each PC on the LAN needs a working Ether net Adapter and an Ethernet cable with RJ[…]

  • Страница 12

    TL-R860 Cable/DSL Router User Guide Figure 3-1 Hardware Inst allation of the TL-R860 C able/DSL Router — 7 -[…]

  • Страница 13

    TL-R860 Cable/DSL Router User Guide Chapter 4. Quick Installation Guide After connecting the TL-R860 router into your network, you should configure it. This chapter describes how to c onfigure the basic f unctions of your TL-R860 Cable/DSL Router . These procedures may take you only a few minutes. Y ou can access the Internet via the router immedia[…]

  • Страница 14

    TL-R860 Cable/DSL Router User Guide If the result displayed is similar to what is shown in Figure 4-1 , the connection between your PC and the router has been established. Figure 4-2 Failed result of Ping command If the result displayed is si milar to what is shown in Figure 4-2 , it means that your PC has not connected to the router . If so, refer[…]

  • Страница 15

    TL-R860 Cable/DSL Router User Guide Figure 4-4 Login Windows Note : If the above screen does not prompt, it means that your web-browser has been set to a proxy . Go to T ools menu>Internet Op tions>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy c heckbox, and click OK to finish it. If the User Name and Passwor[…]

  • Страница 16

    TL-R860 Cable/DSL Router User Guide Figure 4-7 Quick Setup — PPPoE ¾ User Name and Password — Enter the User Name and Password provided by your ISP. These fields are case s ensitive. If you have difficult y with this process, please contact your ISP. If you choose » Dyn amic I P «, the router will automatically receive the IP parameters […]

  • Страница 17

    TL-R860 Cable/DSL Router User Guide After finishing all configurations of basic network p arameters, please click Finish button to exit this Quick Setup . — 12 -[…]

  • Страница 18

    TL-R860 Cable/DSL Router User Guide Chapter 5. Configuring the Router This chapter describes eac h web page’s key functions. 5.1 login After your successful login, you can confi gure and manage the router . There are nine main menus on the left of the web- based utility . Submenus will be av ailable after you click one of the main menus. The n[…]

  • Страница 19

    TL-R860 Cable/DSL Router User Guide Figure 5-1 Router S tatus 5.3 Quick Setup Please refer to Section 4.2: «Quick Installation Guide.» 5.4 Network Figure 5-2 the Network menu There are three submenus under the Network menu (show n in Figure 5-2 ): LAN , WA N and MAC Clone. Click any of them, and you will be abl e to configure the correspo[…]

  • Страница 20

    TL-R860 Cable/DSL Router User Guide Figure 5-3 LAN ¾ MAC Address — The physical address of the r outer , as seen from the LA N. The value can’t be changed. ¾ IP Address — Enter the IP address of your r outer (factory default: 192.168.1.1). ¾ Subnet Mask — An address code that determines t he size of the network. Normally use 255.255.255.0 a[…]

  • Страница 21

    TL-R860 Cable/DSL Router User Guide Figure 5-4 W AN — Dynamic IP This page displays the W AN IP p aramete rs assigned dynamically by your ISP , including IP address, Su bnet Mask, Default Gateway , etc. Click the Renew button to renew the IP p arameters from your ISP . Click the Release button to release the IP parameters. ¾ MTU Size: The normal M[…]

  • Страница 22

    TL-R860 Cable/DSL Router User Guide Figure 5-5 W AN — 802.1X + Dynamic IP ¾ User Name — Enter the user name for 802.1x authentication provided by your ISP ¾ Password — Enter the password for 802.1x authentication provided by your ISP. Click the Login button to start 802.1x authentication. Click the Logout button to end 802.1x authentication. 2. I[…]

  • Страница 23

    TL-R860 Cable/DSL Router User Guide Figure 5-7 W AN — 802.1X + S tatic IP ¾ User Name — Enter the user name for 802.1x authentication provided by your ISP ¾ Password — Enter the password for 802.1x authentication provided by your ISP. Click Login to start 802.1x authentication. Click Logout to end 802.1x authentication. 3. If you choose PPPoE, yo[…]

  • Страница 24

    TL-R860 Cable/DSL Router User Guide disconnect based on time. Enter the start time in HH:MM for connecting and en d time in HH:MM for disconnecting in the Period of T ime fields. Note: Only you have set the system time on System T ools -> T ime page, will the Time-based Connecting function t ake effect. ¾ Connect Manually — Y ou can configure t[…]

  • Страница 25

    TL-R860 Cable/DSL Router User Guide seconds. If the value is 0, it means do not detect. ¾ DNS IP Address — If you know that your ISP does not automatically transmit DNS addresses to the router during login, click “ Use the follow ing DNS servers ” checkbox and enter the IP address of your ISP’ s primary DNS server . If a secondary DNS server[…]

  • Страница 26

    TL-R860 Cable/DSL Router User Guide 5.5 DHCP Figure 5-1 1 the DHCP me nu There are three submenus under the DHCP menu (shown in Figure 5-1 1 ): DHCP Settings , DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding functi on. The detailed explanations for each submenu are provided below . 5[…]

  • Страница 27

    TL-R860 Cable/DSL Router User Guide the router, default value is 192.168.1.1 ¾ Default Domain — (Optional.) Input the domai n name of your network. ¾ Primary DNS — (Optional.) Input the DNS IP addre ss provided by your ISP. Or consult your ISP. ¾ Secondary DNS — (Optional.) Input the IP address of another DNS server if your ISP provides two DNS […]

  • Страница 28

    TL-R860 Cable/DSL Router User Guide Figure 5-14 Address Reservation ¾ MAC Address — The MAC address of the PC of which you want to reserve IP address. ¾ Assigned IP Address — The IP address of the router reserved. ¾ Status — The status of this entry either Enabled or Disabled . To Reserve IP addresses: 1. Click the Add New button . (Pop-up Figur[…]

  • Страница 29

    TL-R860 Cable/DSL Router User Guide 5.6 Forwarding Figure 5-16 the Forwarding menu There are four submenus under the Forwarding menu (shown in Figure 5-16 ): Vir tu al Servers , Port T riggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided b[…]

  • Страница 30

    TL-R860 Cable/DSL Router User Guide 4. Select the protocol used for this application, either TCP or UDP , or All . 5. Select the Enable checkbox to enable the virtual server . 6. Click the Save button. Figure 5-18 Add or Modify a Virtual Server Entry Note: It is possible that you have a computer or server that has more than one typ e of available s[…]

  • Страница 31

    TL-R860 Cable/DSL Router User Guide Figure 5-19 Port T riggering Once configured, operation is as follows: 1. A local host makes an outgoing connec tion using a destination port number defined in the T rigger Por t field. 2. The router records this connection, opens the incoming port or port s associated with this entry in the Port Triggering t abl[…]

  • Страница 32

    TL-R860 Cable/DSL Router User Guide Figure 5-20 Add or Modify a T riggering Entry There are many popular applications in the Popular Application list. You can select it, and the application will fill in the Trigger Port , incoming Ports Range boxes and select the Enable checkbox. It has the same effect as adding a new rule. T o modify or delete an […]

  • Страница 33

    TL-R860 Cable/DSL Router User Guide Figure 5-21 DMZ T o assign a computer or server to be a DMZ server: 1. Click the Enable radio button 2. Enter the local host IP Address in the DMZ Host IP Address field 3. Click the Save button. Note : After you set the DMZ host, the fire wall related to the host will not work. 5.6.4 UPnP The Universal Plug and P[…]

  • Страница 34

    TL-R860 Cable/DSL Router User Guide Click Refresh to update the Current UPnP Settings List. 5.7 Security Figure 5-23 the Security menu There are six submenus under the Security menu (shown in Figure 5-23 ): Firew all , IP Address Filtering, Domain Filtering, MAC Filtering, Remote Management and Advanced Security . Click any of them, and you will be[…]

  • Страница 35

    TL-R860 Cable/DSL Router User Guide ¾ Enable IP Address Filtering — set IP Address Filteri ng is enabled or disabled. There are two default filtering rules of IP Address Filtering, either Allow or Reny passing through the router. ¾ Enable Domain Filtering — Set Domain Filtering as enabled or disabled. ¾ Enable MAC Filtering — Set MAC Address Fil[…]

  • Страница 36

    TL-R860 Cable/DSL Router User Guide from 08:03 to 17:05. 2. LAN IP Address — Type a LAN IP ad dress or a range of LAN IP addresses in the field. For example, 192. 168.1.20 — 192.168.1.30. K eep the field open, which means all LAN IP addresses have been put into the field. 3. LAN Port — Type a LAN Port or a range of LAN por ts in the field. For exam[…]

  • Страница 37

    TL-R860 Cable/DSL Router User Guide 5.7.3 Domain Filtering The Domain Filtering page (shown in Figure 5-2 7 ) allows you to control access to cert ain websites on the Internet by specif ying their domains or key words. Figure 5-27 Domain Filtering Before adding a Domain Filtering e ntry, you must ensure that Enable Firewall and Enable Domain Filter[…]

  • Страница 38

    TL-R860 Cable/DSL Router User Guide Click the Enabled All button to enable all entries. Click the Disable All button disable all entries. Click the Delete All button to delete all entries Click the Next button to go to the next page and the Previous button to return to the previous page. For example: if you want to block the PCs on your LAN fr om a[…]

  • Страница 39

    TL-R860 Cable/DSL Router User Guide Figure 5-30 Add or Modify a MAC Address Filtering entry To add or modify a MAC Address Filter ing entry, follow these instructions: 1. Enter the appropriate MAC address into the MAC Address field. The format of the MAC address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0E-AE-B0-00-0B. 2. T[…]

  • Страница 40

    TL-R860 Cable/DSL Router User Guide Figure 5-31 Remote Management ¾ Web Management Port — Web browser access normally uses the standard HTTP service port 80. This router’s default remote management web port number is 80 . For greater security, you can change the remote management web interface to a custom port by entering that number in the box […]

  • Страница 41

    TL-R860 Cable/DSL Router User Guide Figure 5-32 Advanced Security settings ¾ Packets S tatistic interval (5 ~ 60) — The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets S tatistic interval value indicates the time section of the packe ts statistic. The re su lt of the statistic used for analysis by SY[…]

  • Страница 42

    TL-R860 Cable/DSL Router User Guide W AN port. The default is disabled. If enabl ed, the ping packet from the Internet cannot access the router . ¾ Forbid Ping Packet from LAN Port — Enable or Disable forbidding Ping Packet to access the router from the LAN port. The default value is disabled. If enabled, the ping packet from the LAN port cannot a[…]

  • Страница 43

    TL-R860 Cable/DSL Router User Guide Figure 5-34 S tatic Routing T o add st atic routing entries: 1. Click the Add New button. (pop-up Figure 5-35 ) 2. Enter the following data: ¾ Destination IP Address — The Destination IP Address is the address of the network or host that you want to assig n to a static route. ¾ Subnet Mask — The Subnet Mask det[…]

  • Страница 44

    TL-R860 Cable/DSL Router User Guide 5.9 IP & MAC Binding Setting Figure 5-36 the IP & MAC Binding menu There are two submenu s under the IP &MAC Binding menu (shown in Figure 5-36 ): Binding Setting and ARP List . Click any of them, and you will be able to scan or configure the corresponding function. The detailed explanations for each […]

  • Страница 45

    TL-R860 Cable/DSL Router User Guide Figure 5-38 IP & MAC Binding Setting (Add & Modify) To add IP & MAC Bindin g entries: 1. Click the Add New.. button. 2. Enter the MAC Address and IP Address. 3. Select the Bind checkbox. 4. Click the Save button to save it. To modify or delete an existing entry: 1. Find the desired entry in the table.[…]

  • Страница 46

    TL-R860 Cable/DSL Router User Guide MAC Binding entries (shown in Figure 5-40 ). Figure 5-40 ARP List • MAC Address — The MAC address of the contro lled computer in the LAN. • IP Address — The assigned IP address of the controlled computer in the LAN. • Status — To show the MAC address and IP address binding is enabled or not. • Configure -[…]

  • Страница 47

    TL-R860 Cable/DSL Router User Guide appear as shown in Figure 5-41 : Figure 5-41 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the domain name your dynamic DNS service provider gave. 2. T ype the User Name for your DDNS account. 3. T ype the Password for your DDNS account. 4. Click the Login button to login to the[…]

  • Страница 48

    TL-R860 Cable/DSL Router User Guide To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Password for your DDNS account. 3. Click the Login button to login the DDNS service. ¾ Connection Status — The status of the DDNS servic e connection is displayed here. ¾ Domain Name — The domain names are […]

  • Страница 49

    TL-R860 Cable/DSL Router User Guide 5.11 System T ools Figure 5-44 the System T ools menu There are seven submenus under t he System T ools menu (shown in Figure 5-44 ): Tim e , Firmware , Factory Default s, Backup and Restore, Reboot, Password, Log and St atistics. Click any of them, and you will be abl e to configure t he corresponding function. […]

  • Страница 50

    TL-R860 Cable/DSL Router User Guide Internet. Note : 1. This setting will be used for some time -based functions such as firewall. You must specify your time z one once you login to the router successfully, if not the time limited on these functions will not take effect. 2. The time will be lost if the router is turned of f. 3. The router will obta[…]

  • Страница 51

    TL-R860 Cable/DSL Router User Guide 2. The router will reboot a fter the upgrade has finished. 5.11.3 Factory Defaults This page (shown in Figure 5-47 ) allows you to restore the factory default settings for the router . Figure 5-47 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. • The[…]

  • Страница 52

    TL-R860 Cable/DSL Router User Guide Figure 5-49 Reboot the router Click the Reboot button to reboot the router. Some settings of the router will take effect only after rebooting, which include: • Change LAN IP Address. (Syste m will reboot automatically) • MAC Clone (system will reboot automatically) • DHCP service function. • Static addres[…]

  • Страница 53

    TL-R860 Cable/DSL Router User Guide 5.11.7 Log This page (shown in Figure 5-51 ) allows you to query the Logs of the router. Figure 5-51 System Log The router can keep logs of all traffic. Y ou can query the logs to find what happened to the router. Click the Refresh button to refresh the logs. Click the Clear Log button to clear all the logs. 5.11[…]

  • Страница 54

    TL-R860 Cable/DSL Router User Guide IP A ddress The IP address displayed with statistics Packets The total amount of packets receiv ed and transmitted by the router. Total Bytes The total amount of bytes received and transmitted by the router. Packets The total amount of packets rece ived and transmitted in the last Pack ets Statistic interval seco[…]

  • Страница 55

    TL-R860 Cable/DSL Router User Guide Appendix A: FAQ 1. How do I configure the router to access Internet by ADSL users? 1) First, configure the ADSL modem configured in RFC1483 bridg e model. 2) Connect the Ethernet cable from your ADSL modem to the W AN port on the router . The telephone cord plugs into the Line port of the ADSL modem. 3) Login to […]

  • Страница 56

    TL-R860 Cable/DSL Router User Guide MAC register , login to the router and cl ick the «Network» menu link on the left of your browser , and then click «MAC Clone» submenu link. On the «MAC Clone» page, if your PC’ s MAC address is a proper MAC address, click the «Clone MAC Address» button and your PC’s MA[…]

  • Страница 57

    TL-R860 Cable/DSL Router User Guide “S tatus” p age. 4) How to enab le DMZ Host: Login to the router , click the “Forwarding” menu on the left of your browser , and click » DMZ» submenu. On t he «DMZ» page, click “Enable” radio and type your IP address into the “DMZ Host IP Address” field, using 192.168.1.169 as […]

  • Страница 58

    TL-R860 Cable/DSL Router User Guide Figure A-8 Virtual Serve r — 53 -[…]

  • Страница 59

    TL-R860 Cable/DSL Router User Guide Appendix B: Configuring the PCs In this section, we’ll introduce how to inst all and configure the TCP/IP correctly in Windows XP . First make sure your Ethernet A dapter is working, refer to the adapte r ’s manual if needed. 1. Inst all TCP/IP component 1) On the Windows taskbar , click the Start button, poi[…]

  • Страница 60

    TL-R860 Cable/DSL Router User Guide Figure B-54 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below: ¾ Setting IP address automatically Select Obt ain an IP address automatically , Choose Obt ain DNS server automatically , as s[…]

  • Страница 61

    TL-R860 Cable/DSL Router User Guide Figure B-55 ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the following items available 2 If the router’s LAN IP address is 192.168. 1.1, type IP address is 192.168.1.x (x is from 2 to 254), and Subnet mask is 255.255.255.0. 3 T ype the rou ter ’s LAN IP address (t […]

  • Страница 62

    TL-R860 Cable/DSL Router User Guide Figure B-4 Now: All the configurations are fi nished; it will take ef fect after reboot your computer . — 57 -[…]

  • Страница 63

    TL-R860 Cable/DSL Router User Guide Appendix C: Specifications General S tandards IEEE 802.3, 802.3u Protocols TCP/IP , PPPoE, DHCP , ICMP , NA T , SNTP Ports One 10/100M Auto-Negotiation WAN RJ45 port. Eight 10/100M Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX Cabling T ype 10BASE-T : UTP categor y 3, 4, 5 cable (maximum 100m) EIA/TIA-[…]

  • Страница 64

    TL-R860 Cable/DSL Router User Guide Appendix D: Glossary ¾ DDNS ( D ynamic D omain N ame S ystem) — The capability of assigning a fixed host and domain name to a dynamic Internet IP address. ¾ DHCP ( D ynamic H ost C onfiguration P rotocol) — A protocol that automatically configure the TCP/IP p arame ters for the all the PCs t hat are connected t[…]

  • Страница 65

    TL-R860 Cable/DSL Router User Guide Appendix E: Contact Information For help with the installation or operation of the TP-LINK TL-R8 60 Cable/DSL Router, please contact us. Website: http://www.tp-link.com — 60 -[…]

Источник

Утилита

EasySetupAssistant

 Загрузить
Дата публикации: 2010-05-19 Язык: Английский Размер файла: 8.733 MB

Операционная система : Windows 2000/XP/2003/Vista/7

Видео по настройке

  • Что делать, если нет доступа в интернет при использовании DSL-модема и роутера TP-Link?

  • Не получается выйти в интернет?

    Пошаговое описание решения проблемы.

    Больше
    Меньше

Как обновить прошивку

Обновление программного обеспечения (прошивки) способно решить проблемы предыдущих версий прошивки и улучшить работу устройства. Во избежание возникновения проблем при обновлении ознакомьтесь со следующей информацией.

Проверьте соответствие аппаратной версии и версии прошивки — установка неверной версии может привести к неисправности устройства и аннулировать гарантию (обычно версия 1.x = версия 1). Как узнать аппаратную версию устройства?

Не рекомендуется устанавливать прошивку, предназначенную для другого региона. Нажмите здесь для выбора региона и загрузите последнюю версию прошивки.

Отключение питания во время обновления может привести к неисправности устройства.

Обновляйте прошивку роутера по Wi-Fi только тогда, когда это является единственно возможным способом.

Перед обновлением рекомендуется закрыть на компьютере все программы, для работы которых требуется интернет-подключение, или просто отсоединить сетевой кабель от устройства.

Перед выполнением обновления файл с прошивкой необходимо извлечь из архива с помощью архиватора (например, WinRAR или WinZIP).

Рекомендации по обновлению прошивки: Wi-Fi роутер, Wi-Fi роутер с модемом ADSL2+, усилитель Wi-Fi сигнала.

Больше
Меньше

TL-R860_v5_120308_RU

 Загрузить
Дата публикации: 2012-03-08 Язык: Английский Размер файла: 707 KB

Modifications and Bug Fixes:

  1. Support Dual Access and IGMP Snooping

Notes:

For TL-R860 hardware version 5 only.

TL-R860_V5_100519

 Загрузить
Дата публикации: 2011-01-25 Язык: Английский Размер файла: 704.331 KB

Modifications and Bug Fixes:

  1. First firmware for V5 hardware version

Notes:

For TL-R860 V5

Официальное программное обеспечение устройств TP-Link может быть заменено на стороннее, например, на DD-WRT. Компания TP-Link не обязана предоставлять сервисную или техническую поддержку для устройств со сторонним ПО и не гарантирует стабильность его работы. Ущерб, нанесённый устройству в результате использования стороннего ПО, приведёт к аннулированию гарантии.

Открытый исходный код для программистов (GPL)

Следующая информация предназначена для программистов и не представляет особой значимости для большинства конечных пользователей продукции TP-Link.

Продукция TP-Link содержит код, разработанный третьими лицами, включая код, разработанный в соответствии с универсальной общественной лицензией GNU (GPL) версий 1–3 или в соответствии со универсальной общественной лицензией ограниченного применения GNU (LGPL). Вы можете использовать соответствующее программное обеспечение на условиях лицензии GPL.

Ознакомиться, распечатать и загрузить соответствующие условия лицензии GPL можно здесь. В центре исходных кодов GPL можно скачать исходный код GPL соответствующего ПО, используемого в продукции TP-Link, а также прочую информацию, включая список ПО TP-Link, содержащего исходный код GPL.

TP-Link TL-R860 User Manual

  • Contents

  • Table of Contents

  • Bookmarks

Quick Links

TL-R860

Cable/DSL Router

Rev: 1.0.2

1910010010

Related Manuals for TP-Link TL-R860

Summary of Contents for TP-Link TL-R860

  • Page 1
    TL-R860 Cable/DSL Router Rev: 1.0.2 1910010010…
  • Page 2
    Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

  • Page 3: Fcc Statement

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 4: Table Of Contents

    CONTENTS Package Contents………………1 Chapter 1. Introduction ……………..2 Overview of the Router ………………. 2 Features ………………….2 Panel Layout ………………..3 1.3.1 The Front Panel………………3 1.3.2 The Rear Panel ………………3 Chapter 2. Connecting the Router…………..5 System Requirements ………………5 Installation Environment Requirements…………

  • Page 5
    Static Routing ………………..36 IP & MAC Binding Setting …………….37 4.9.1 Binding Setting ………………. 38 4.9.2 ARP List………………..39 4.10 DDNS ………………….40 4.10.1 Dyndns.org DDNS …………….40 4.10.2 Oray.net DDNS………………. 41 4.10.3 Comexe.cn DDNS …………….41 4.11 System Tools………………..42 4.11.1 Time………………..

  • Page 6: Package Contents

    Cable/DSL Router User Guide Package Contents The following contents should be found in your package: One TL-R860 Cable/DSL Router One AC power Adapter for TL-R860 Cable/DSL Router Quick Installation Guide One Resource CD for TL-R860 Cable/DSL Router, including: • This Guide •…

  • Page 7: Chapter 1. Introduction

    Cable/DSL Router will allow you to connect your network better than ever, sharing Internet Access, files and fun, easily and securely. The TL-R860 Cable/DSL Router provides flexible access control so that parents or network administrators can establish restricted access policies for children or staff. It has built-in NAT and DHCP server supporting static IP address distributing.

  • Page 8: Panel Layout

    1.3 Panel Layout 1.3.1 The Front Panel The front panel of the TL-R860 consists of several LED indicators, which is designed to indicate connections. Viewed from left to right. Table 1-1 describes the LEDs on the front panel of the router.

  • Page 9
    Cable/DSL Router User Guide 1-8: Eight LAN 10/100Mbps RJ45 ports for connecting the router to the local PCs POWER: AC power socket: only use the power adapter supplied with the TL-R860 Cable/DSL Router, use of a different adapter may result in product damage.

  • Page 10: Chapter 2. Connecting The Router

    TL-R860 Cable/DSL Router User Guide Chapter 2. Connecting the Router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable modem that has an RJ45 connector (It’s not necessary if you connect the router to Ethernet) Each PC on the LAN needs a working Ethernet Adapter and an Ethernet cable with…

  • Page 11
    TL-R860 Cable/DSL Router User Guide Figure 2-1 Hardware Installation of the TL-R860 Cable/DSL Router — 6 -…

  • Page 12: Chapter 3. Quick Installation Guide

    3.1 TCP/IP configuration The default IP address of the TL-R860 Cable/DSL Router is 192.168.1.1, and the default Subnet Mask is 255.255.255.0. These values can be seen from the LAN, and can be changed as your desire.

  • Page 13: Quick Installation Guide

    3.2 Quick Installation Guide ® With a Web-based (Internet Explorer or Netscape Navigator) utility, the TL-R860 Cable/DSL Router is easy to configure and manage. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a web browser.

  • Page 14
    TL-R860 Cable/DSL Router User Guide After a moment, a login window will appear similar to that shown in Figure 3-4. Enter admin for the User Name and Password, both in lower case letters. Then click the OK button or press the Enter key.
  • Page 15
    TL-R860 Cable/DSL Router User Guide The router supports three popular ways to connect to Internet. Please select one compatible with your ISP, if you are given another way not listed here, refer to Network→ WAN for detailed list. Click Next to enter the necessary network parameters.
  • Page 16
    TL-R860 Cable/DSL Router User Guide Figure 3-9 Quick Setup — Finish After finishing all configurations of basic network parameters, please click Finish button to exit this Quick Setup. — 11 -…

  • Page 17: Chapter 4. Configuring The Router

    TL-R860 Cable/DSL Router User Guide Chapter 4. Configuring the Router This chapter describes each web page’s key functions. 4.1 login After your successful login, you can configure and manage the router. There are nine main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus.

  • Page 18: Quick Setup

    TL-R860 Cable/DSL Router User Guide Figure 4-1 Router Status 4.3 Quick Setup Please refer to Section 4.2: «Quick Installation Guide.» 4.4 Network Figure 4-2 the Network menu There are three submenus under the Network menu (shown in Figure 4-2): LAN, WAN and MAC Clone.

  • Page 19: Wan

    TL-R860 Cable/DSL Router User Guide Figure 4-3 LAN MAC Address — The physical address of the router, as seen from the LAN. The value can’t be changed. IP Address — Enter the IP address of your router (factory default: 192.168.1.1).

  • Page 20
    TL-R860 Cable/DSL Router User Guide Figure 4-4 WAN — Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP. Click the Release button to release the IP parameters.
  • Page 21
    TL-R860 Cable/DSL Router User Guide Figure 4-5 WAN — 802.1X + Dynamic IP User Name — Enter the user name for 802.1x authentication provided by your ISP Password — Enter the password for 802.1x authentication provided by your ISP. Click the Login button to start 802.1x authentication.
  • Page 22
    TL-R860 Cable/DSL Router User Guide Figure 4-7 WAN — 802.1X + Static IP User Name — Enter the user name for 802.1x authentication provided by your ISP Password — Enter the password for 802.1x authentication provided by your ISP. Click Login to start 802.1x authentication.
  • Page 23
    TL-R860 Cable/DSL Router User Guide Time-based Connecting — You can configure the router to make it connect or disconnect based on time. Enter the start time in HH:MM for connecting and end time in HH:M M for disconnecting in the Period of Time fields.

  • Page 24: Mac Clone

    TL-R860 Cable/DSL Router User Guide specified by ISP” check box and enter the IP address , which your ISP provided. Detect Online Interval — The default value is 0, you can input the value between 0 and 120. The router will detect Access Concentrator online at every interval between seconds.

  • Page 25: Dhcp

    TL-R860 Cable/DSL Router User Guide 4.5 DHCP Figure 4-11 the DHCP menu There are three submenus under the DHCP menu (shown in Figure 4-11): DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

  • Page 26: Dhcp Clients List

    TL-R860 Cable/DSL Router User Guide Default Domain — (Optional.) Input the domain name of your network. Primary DNS — (Optional.) Input the DNS IP address provided by your ISP. Or consult your ISP. Secondary DNS — (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers.

  • Page 27
    TL-R860 Cable/DSL Router User Guide Figure 4-14 Address Reservation MAC Address — The MAC address of the PC of which you want to reserve IP address. Assigned IP Address — The IP address of the router reserved. Status — The status of this entry either Enabled or Disabled.

  • Page 28: Forwarding

    TL-R860 Cable/DSL Router User Guide 4.6 Forwarding Figure 4-16 the Forwarding menu There are four submenus under the Forwarding menu (shown in Figure 4-16): Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function.

  • Page 29: Port Triggering

    TL-R860 Cable/DSL Router User Guide Select the protocol used for this application, either TCP or UDP, or All. Select the Enable checkbox to enable the virtual server. Click the Save button. Figure 4-18 Add or Modify a Virtual Server Entry…

  • Page 30
    TL-R860 Cable/DSL Router User Guide Figure 4-19 Port Triggering Once configured, operation is as follows: 1. A local host makes an outgoing connection using a destination port number defined in the Trigger Port field. 2. The router records this connection, opens the incoming port or ports associated with this entry in the Port Triggering table, and associates them with the local host.

  • Page 31: Dmz

    TL-R860 Cable/DSL Router User Guide Figure 4-20 Add or Modify a Triggering Entry There are many popular applications in the Popular Application list. You can select it, and the application will fill in the Trigger Port, incoming Ports Range boxes and select the Enable checkbox.

  • Page 32: Upnp

    TL-R860 Cable/DSL Router User Guide Figure 4-21 DMZ To assign a computer or server to be a DMZ server: Click the Enable radio button Enter the local host IP Address in the DMZ Host IP Address field Click the Save button.

  • Page 33: Security

    TL-R860 Cable/DSL Router User Guide Click Refresh to update the Current UPnP Settings List. 4.7 Security Figure 4-23 the Security menu There are six submenus under the Security menu (shown in Figure 4-23): Firewall, IP Address Filtering, Domain Filtering, MAC Filtering, Remote Management and Advanced Security.

  • Page 34: Ip Address Filtering

    TL-R860 Cable/DSL Router User Guide There are two default filtering rules of IP Address Filtering, either Allow or Reny passing through the router. Enable Domain Filtering — Set Domain Filtering as enabled or disabled. Enable MAC Filtering — Set MAC Address Filtering is enabled or disabled. You can select the default filtering rules of MAC Address Filtering, either Allow or Reny accessing the router.

  • Page 35
    TL-R860 Cable/DSL Router User Guide LAN IP Address — Type a LAN IP address or a range of LAN IP addresses in the field. For example, 192.168.1.20 — 192.168.1.30. Keep the field open, which means all LAN IP addresses have been put into the field.

  • Page 36: Domain Filtering

    TL-R860 Cable/DSL Router User Guide 4.7.3 Domain Filtering The Domain Filtering page (shown in Figure 4-27) allows you to control access to certain websites on the Internet by specifying their domains or key words. Figure 4-27 Domain Filtering Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable Domain Filtering have been selected on the Firewall page.

  • Page 37: Mac Filtering

    TL-R860 Cable/DSL Router User Guide Click the Enabled All button to enable all entries. Click the Disable All button disable all entries. Click the Delete All button to delete all entries Click the Next button to go to the next page and the Previous button to return to the previous page.

  • Page 38: Remote Management

    TL-R860 Cable/DSL Router User Guide Figure 4-30 Add or Modify a MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instructions: Enter the appropriate MAC address into the MAC Address field. The format of the MAC address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).

  • Page 39: Advanced Security

    TL-R860 Cable/DSL Router User Guide Figure 4-31 Remote Management Web Management Port — Web browser access normally uses the standard HTTP service port 80. This router’s default remote management web port number is For greater security, you can change the remote management web interface to a custom port by entering that number in the box provided.

  • Page 40
    TL-R860 Cable/DSL Router User Guide Figure 4-32 Advanced Security settings Packets Statistic interval (5 ~ 60) — The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval value indicates the time section of the packets statistic. The result of the statistic used for analysis by SYN Flood, UDP Flood and ICMP-Flood.

  • Page 41: Static Routing

    TL-R860 Cable/DSL Router User Guide WAN port. The default is disabled. If enabled, the ping packet from the Internet cannot access the router. Forbid Ping Packet from LAN Port — Enable or Disable forbidding Ping Packet to access the router from the LAN port. The default value is disabled. If enabled, the ping packet from the LAN port cannot access the router.

  • Page 42: Ip & Mac Binding Setting

    TL-R860 Cable/DSL Router User Guide To add static routing entries: Click the Add New button. (pop-up Figure 4-35) Enter the following data: Destination IP Address — The Destination IP Address is the address of the network or host that you want to assign to a static route.

  • Page 43: Binding Setting

    TL-R860 Cable/DSL Router User Guide 4.9.1 Binding Setting This page displays the IP & MAC Binding Setting table, you can operate it in accord with your desire. (shown in Figure 4-37). Figure 4-37 IP & MAC Binding Setting • MAC Address — The MAC address of the controlled computer(s) in the LAN.

  • Page 44: Arp List

    TL-R860 Cable/DSL Router User Guide Find the desired entry in the table. Click Modify or Delete as desired on the Modify column. To find an existing entry: Click the Find button (shown in Figure 4-37). Enter the MAC Address or IP Address.

  • Page 45: Ddns

    TL-R860 Cable/DSL Router User Guide • Status — To show the MAC address and IP address binding is enabled or not. • Configure — Load or delete item. • Load — Load the item to the IP & MAC Binding list.

  • Page 46: Oray.net Ddns

    TL-R860 Cable/DSL Router User Guide To set up for DDNS, follow these instructions: Type the domain name your dynamic DNS service provider gave. Type the User Name for your DDNS account. Type the Password for your DDNS account. Click the Login button to login to the DDNS service.

  • Page 47: System Tools

    TL-R860 Cable/DSL Router User Guide Figure 4-43 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: Type the domain names your dynamic DNS service provider gave. Type the User Name for your DDNS account. Type the Password for your DDNS account.

  • Page 48: Time

    TL-R860 Cable/DSL Router User Guide 4.11.1 Time You can set the time manually or get GMT from the Internet for the router on this page (shown in Figure 4-45): Figure 4-45 Time settings Time Zone — Select your local time zone from this pull down list.

  • Page 49: Factory Defaults

    To upgrade the router’s firmware, follow these instructions: Download the latest firmware upgrade file from the TP-LINK website (www.tp-link.com). Run a TFTP Server on a PC on your LAN, and take the file in the TFTP server’s path.

  • Page 50: Backup And Restore

    TL-R860 Cable/DSL Router User Guide Click the Restore button to reset all configuration settings to their default values. • The default User Name: admin • The default Password: admin • The default IP Address: 192.168.1.1 • The default Subnet Mask: 255.255.255.0 Note: Any settings you have saved will be lost when the default settings are restored.

  • Page 51: Password

    TL-R860 Cable/DSL Router User Guide • MAC Clone (system will reboot automatically) • DHCP service function. • Static address assignment of DHCP server. • Web Service Port of the router. • Upgrade the firmware of the router (system will reboot automatically).

  • Page 52: Statistics

    TL-R860 Cable/DSL Router User Guide Figure 4-51 System Log The router can keep logs of all traffic. You can query the logs to find what happened to the router. Click the Refresh button to refresh the logs. Click the Clear Log button to clear all the logs.

  • Page 53
    TL-R860 Cable/DSL Router User Guide Statistics Table: IP Address The IP address displayed with statistics Packets The total amount of packets received and transmitted by the router. Total Bytes The total amount of bytes received and transmitted by the router.

  • Page 54: Appendix A: Faq

    TL-R860 Cable/DSL Router User Guide Appendix A: FAQ How do I configure the router to access Internet by ADSL users? First, configure the ADSL modem configured in RFC1483 bridge model. Connect the Ethernet cable from your ADSL modem to the WAN port on the router.

  • Page 55
    TL-R860 Cable/DSL Router User Guide MAC register, login to the router and click the «Network» menu link on the left of your browser, and then click «MAC Clone» submenu link. On the «MAC Clone» page, if your PC’s MAC address is a proper MAC address, click the «Clone MAC Address»…
  • Page 56
    TL-R860 Cable/DSL Router User Guide Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. How to enable DMZ Host: Login to the router, click the “Forwarding” menu on the left of your browser, and click » DMZ» submenu. On the «DMZ» page, click “Enable”…
  • Page 57
    TL-R860 Cable/DSL Router User Guide Figure A-8 Virtual Server — 52 -…

  • Page 58: Appendix B: Configuring The Pcs

    TL-R860 Cable/DSL Router User Guide Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.

  • Page 59
    TL-R860 Cable/DSL Router User Guide Figure B-54 The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below: Setting IP address automatically…
  • Page 60
    TL-R860 Cable/DSL Router User Guide Figure B-55 Setting IP address manually Select Use the following IP address radio button. And the following items available If the router’s LAN IP address is 192.168.1.1, type IP address is 192.168.1.x (x is from 2 to 254), and Subnet mask is 255.255.255.0.
  • Page 61
    TL-R860 Cable/DSL Router User Guide Figure B-4 Now: All the configurations are finished; it will take effect after reboot your computer. — 56 -…

  • Page 62: Appendix C: Specifications

    TL-R860 Cable/DSL Router User Guide Appendix C: Specifications General Standards IEEE 802.3, 802.3u Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Ports One 10/100M Auto-Negotiation WAN RJ45 port. Eight 10/100M Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX Cabling Type 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω…

  • Page 63: Appendix D: Glossary

    TL-R860 Cable/DSL Router User Guide Appendix D: Glossary DDNS (Dynamic Domain Name System) — The capability of assigning a fixed host and domain name to a dynamic Internet IP address. DHCP (Dynamic Host Configuration Protocol) — A protocol that automatically configure the TCP/IP parameters for the all the PCs that are connected to a DHCP server.

Посмотреть инструкция для TP-Link TL-R860 бесплатно. Руководство относится к категории Маршрутизаторы (роутеры), 1 человек(а) дали ему среднюю оценку 6.9. Руководство доступно на следующих языках: английский. У вас есть вопрос о TP-Link TL-R860 или вам нужна помощь? Задайте свой вопрос здесь

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о TP-Link TL-R860.

В чем разница между роутером и модемом?

От чего зависит скорость загрузки в Интернете?

Вредно ли Wi-Fi-излучение?

Какой вес TP-Link TL-R860?

Какие сертификаты TP-Link TL-R860 имеет?

Какая высота TP-Link TL-R860?

Какая ширина TP-Link TL-R860?

Какая толщина TP-Link TL-R860?

Инструкция TP-Link TL-R860 доступно в русский?

Не нашли свой вопрос? Задайте свой вопрос здесь

  1. Инструкции и руководства
  2. Бренды
  3. TP-LINK
  4. TL-R860
  5. Руководство Пользователя

TP-LINK

TL-R860 
Cable/DSL Router 

Rev: 1.0.2 
1910010010 

Краткое содержание страницы № 1
Краткое содержание страницы № 2

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd. Copyright © 2007 TP-LINK Technologies Co., L

Краткое содержание страницы № 3

SAFETY NOTICES Caution: Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Краткое содержание страницы № 4

COMMENT Package contents ………………………………………………………………………………1 Chapter 1. About this Guide ……………………………………………………………….2 1.1 Purposes…………………………………………………………………………………………… 2 1.2 Conventions ………………………………………………………………………………………. 2 1.3 Overview of this User Guide…..

Краткое содержание страницы № 5

5.7.2 IP Address Filtering …………………………………………………………………. 30 5.7.3 Domain Filtering ……………………………………………………………………… 32 5.7.4 MAC Filtering………………………………………………………………………….. 33 5.7.5 Remote Management ………………………………………………………………. 34 5.7.6 Advanced Security…………………………………………

Краткое содержание страницы № 6

TL-R860 Cable/DSL Router User Guide Package contents The following contents should be found in your box: One TL-R860 Cable/DSL Router One AC power Adapter for TL-R860 Cable/DSL Router Quick Installation Guide One Resource CD for TL-R860 Cable/DSL Router, including: • This Guide • Other Helpful Information Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the TL-R860 Cable/DSL Router for assistance. — 1 —

Краткое содержание страницы № 7

TL-R860 Cable/DSL Router User Guide Chapter 1. About this Guide Thank you for choosing the TL-R860 Cable/DSL Router. This router provides dedicated solutions for Small Office/Home Office (SOHO) networks. With your network all connected, your local network can share Internet access, files and fun for multiple PCs through one ISP account. It is an easy, web-based setup for installation and management. Even though you may not be familiar with the router, this guide will make configurin

Краткое содержание страницы № 8

TL-R860 Cable/DSL Router User Guide Chapter 2. Introduction 2.1 Overview of the Router The TL-R860 Cable/DSL Router integrates an 8-port switch, firewall, and NAT-router. Its design is dedicated to Small Office/Home Office (SOHO) network solutions. The TL-R860 Cable/DSL Router will allow you to connect your network better than ever, sharing Internet Access, files and fun, easily and securely. The TL-R860 Cable/DSL Router provides flexible access control so that parents or network adm

Краткое содержание страницы № 9

TL-R860 Cable/DSL Router User Guide 2.3 Panel Layout 2.3.1 The Front Panel The front panel of the TL-R860 consists of several LED indicators, which is designed to indicate connections. Viewed from left to right. Table 2-1 describes the LEDs on the front panel of the router. Figure 2-1 Front Panel sketch Name Action Description Not lit No power Power Lit up Power on Not lit The Router has an error System Lit up The Router has an error Flashing The router works properly Not lit

Краткое содержание страницы № 10

TL-R860 Cable/DSL Router User Guide Figure 2-2 Rear Panel sketch — 5 —

Краткое содержание страницы № 11

TL-R860 Cable/DSL Router User Guide Chapter 3. Connecting the Router 3.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable modem that has an RJ45 connector (It’s not necessary if you connect the router to Ethernet) Each PC on the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol must be installed on each PC Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 o

Краткое содержание страницы № 12

TL-R860 Cable/DSL Router User Guide Figure 3-1 Hardware Installation of the TL-R860 Cable/DSL Router — 7 —

Краткое содержание страницы № 13

TL-R860 Cable/DSL Router User Guide Chapter 4. Quick Installation Guide After connecting the TL-R860 router into your network, you should configure it. This chapter describes how to configure the basic functions of your TL-R860 Cable/DSL Router. These procedures may take you only a few minutes. You can access the Internet via the router immediately after it has been successfully configured. 4.1 TCP/IP configuration The default IP address of the TL-R860 Cable/DSL Router is 192.168.1.1,

Краткое содержание страницы № 14

TL-R860 Cable/DSL Router User Guide If the result displayed is similar to what is shown in Figure 4-1, the connection between your PC and the router has been established. Figure 4-2 Failed result of Ping command If the result displayed is similar to what is shown in Figure 4-2, it means that your PC has not connected to the router. If so, refer to the following steps for a solution: 1. Is the connection between your PC and the router correct? Note: The Link/Act LEDs of LAN port on t

Краткое содержание страницы № 15

TL-R860 Cable/DSL Router User Guide Figure 4-4 Login Windows Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. If the User Name and Password are correct, you can configure the router using the web browser. Please click the Quick Setup link on the left of the main menu and the Quick Setup scr

Краткое содержание страницы № 16

TL-R860 Cable/DSL Router User Guide Figure 4-7 Quick Setup — PPPoE User Name and Password — Enter the User Name and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP. If you choose » Dynamic IP», the router will automatically receive the IP parameters from your ISP without needing to enter any parameters. If you Choose «Static IP», the Static IP settings page will appear, shown in Figure 4-8: Figure 4

Краткое содержание страницы № 17

TL-R860 Cable/DSL Router User Guide After finishing all configurations of basic network parameters, please click Finish button to exit this Quick Setup. — 12 —

Краткое содержание страницы № 18

TL-R860 Cable/DSL Router User Guide Chapter 5. Configuring the Router This chapter describes each web page’s key functions. 5.1 login After your successful login, you can configure and manage the router. There are nine main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus. The nine main menus are: Status, Quick Setup, Network, DHCP, Forwarding, Security, Static Routing, DDNS and System Tools. On the right of the web-based u

Краткое содержание страницы № 19

TL-R860 Cable/DSL Router User Guide Figure 5-1 Router Status 5.3 Quick Setup Please refer to Section 4.2: «Quick Installation Guide.» 5.4 Network Figure 5-2 the Network menu There are three submenus under the Network menu (shown in Figure 5-2): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 5.4.1 LAN You can configure the IP parameters of the LAN on this page.

Краткое содержание страницы № 20

TL-R860 Cable/DSL Router User Guide Figure 5-3 LAN MAC Address — The physical address of the router, as seen from the LAN. The value can’t be changed. IP Address — Enter the IP address of your router (factory default: 192.168.1.1). Subnet Mask — An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. Note: a. If you change the IP address of the LAN, you must use the new IP address to login to the router. b. If the new LAN IP Add

Источник

Понравилась статья? Поделить с друзьями:
  • Откатные ворота своими руками пошаговая инструкция видео изготовление
  • Венарус свечи инструкция по применению цена отзывы аналоги цена
  • Вымпелком руководство московского региона
  • Замок эльзы из лего инструкция по сборке холодного сердца
  • Морская пехота руководство