Терминал pax s300 инструкция по применению на русском языке

PAX S300 User Manual

  • Contents

  • Table of Contents

  • Troubleshooting

  • Bookmarks

Quick Links

S300_V1.00.00

User Manual

S300_V1.00.00 User Manual

V20140912

PAX Technology, Inc.

All Rights Reserved.

duplicated, published, or disclosed without PAX prior written permission.

1

loading

Related Manuals for PAX S300

Summary of Contents for PAX S300

  • Page 1
    S300_V1.00.00 User Manual S300_V1.00.00 User Manual V20140912 PAX Technology, Inc. All Rights Reserved. duplicated, published, or disclosed without PAX prior written permission.

  • Page 2: Table Of Contents

    ………………….11 ERMINAL CREENS POS T ………………. 13 ERMINAL OMMUNICATION PTIONS NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 3
    5.5.2 Host URL Params …………………… 123 5.5.3 AutoDial Setup ……………………126 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 4
    C.2 PETE BroadPOS terminal side ………………..191 APPENDIX D–GLOSSARY ……………………. 192 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 5: Revision History

    Date Version Contact Change 2014/10/21 V2014912 W. Kammerer Initial Release support@pax.us NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 6: General Information

    It is required that this document is stored in a safe place for future reference and modifications. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 7: Document Convention

    S300_V1.00.00 User Manual 1.2 Document Convention — Failure to follow specific procedures and practices may result in personal Warning injury. — Failure to follow specific procedures and practices may result in damage to Caution the POS terminal device or other equipment. — Helpful hints and other important information about the use of the POS Note terminal device.

  • Page 8: Document Structure

    This document first introduces general information of BroadPOS Terminal Application for S300; secondly, it focuses on BroadPOS Terminal Application for S300 – PETE; thirdly, it introduces operation of Application Management; then it lists FAQ, glossary and index. This manual contains the following sections：…

  • Page 9: Authorized Use Permission

    1.4 Authorized Use Permission Unless explicitly stated otherwise all content included on this document, such as but not limited to text, images, logos, and slogans, is the property of PAX and is protected by U.S. and international copyright laws. Any other use, including the reproduction, modification, display or distribution, of the content on this system is strictly prohibited.

  • Page 10: Document Reference

    S300_V1.00.00 User Manual 1.5 Document Reference Title Date Version…

  • Page 11: Pax S300 Pos Terminal Overview

    5 lines of text. Screen Display Function menu screen: Function Menu 1.Review 2.Find NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 12
    1.Merchant Settings 2.Operation Settings 3. Hosts Settings 4. System Settings 5. Communication NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 13: Pos Terminal Communication Options

    The following chart summarizes the information regarding the different POS terminal model communication options. GPRS CDMA ODEL THERNET √ S300 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 14: Key Definitions

    Below are examples of the keypad layout of the S300 POS terminal. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 15: How To Load Application

    For Details of how to load application, please refer to BroadPOS Terminal–S300 support@pax.us Application Installation Guide or contact our support at NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 16: How To Do Transaction

    Swipe the Card, or manually enter the Account Number and Exp. Date. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 17
    MMYY format then press [ENTER]. (It can also be input on ECR) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 18
    [ENTER]. (It can be input on ECR) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 19
    Enter the V-code from the back of the credit card ▋ then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 20
    Enter the additional ▋ information for commercial card then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 21
    ECR will print the receipt. POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 22: Credit Return

    Swipe the Card, or manually enter the Account Number and Exp. Date. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 23
    [ENTER]. (It can be input on ECR) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 24
    Transaction Approved Please Sign Your Name Cardholder signs his/her name. Accept Cancel NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 25
    ECR will print the receipt. POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 26: Credit Auth

    Input the dollar amount of the transaction then press 0.00 [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 27
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 28: Credit Postauth

    Please Enter Trans. # Input the transaction # to ▋ be completed. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 29
    Enter the TAX amount for ▋ commercial card then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 30
    ECR will print the receipt. POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 31
    S300_V1.00.00 User Manual NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 32: Credit Forced

    Input the dollar amount of the transaction then press 0.00 [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 33
    Enter the additional ▋ information for commercial card then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 34
    ECR will print the receipt. POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 35
    S300_V1.00.00 User Manual NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 36: Credit Void Sale

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 37
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 38: Credit Void Return

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 39
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 40: Credit Void Post-Auth

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 41
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 42: Credit Void Forced

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 43
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 44: Debit Transaction

    Input the dollar amount of the transaction then press 0.00 [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 45
    4. $30.00 an item of cash back. 5. $50.00 6. Other Amount NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 46
    POS terminal will go back to the idle screen. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 47: Debit Return

    NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 48
    If the POS terminal failed to deliver the message to ECR, POS terminal will generate a reversal automatically before next transaction. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 49
    User Manual POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 50: Ebt Transaction

    Swipe the Card, or manually enter the Account Number and Exp. Date. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 51
    MMYY format then press [ENTER]. (It can also be input on ECR) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 52
    4. $30.00 press [ENTER] to 5. $50.00 6. Other Amount bypass. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 53
    Please Enter Voucher Number : Enter the Voucher number then press ▋ [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 54
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 55: Ebt Return

    NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 56
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 57: Ebt Balance Inquiry

    Press [1] for Food Stamp 1.FoodStamp 2.CashBenefit Press [2] for Cash Benefit NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 58
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 59: Gift Transaction

    Gift Sale Mode in 2.NoNSFSale Additional Prompts Merchant Settings, this step may not prompt. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 60
    Input the dollar amount of the transaction then press 0.00 [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 61
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 62: Gift Return

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 63
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 64: Gift Issue

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 65
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 66: Gift Add Value

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 67
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 68: Gift Balance Inquiry

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 69
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 70: Gift Void

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 71
    The terminal contacts the Host Processor for an approval and deliver the message to ECR, ECR will print the receipt NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 72
    User Manual POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 73: Commercial Cards

    V-code and other AVS settings. Enter the information for all AVS and V-Code prompts. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 74
    NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 75
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 76: Tip Adjust

    Press [4] to find transactions by Card Number. Skip to Step 7. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 77
    If the terminal does not find the transaction, it displays “NOT FOUND!” and backs to idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 78: Menu Option

    Press [CANCEL] or to return to the Idle Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 79: Main Menu Options

    Time & Date, Set working Mode, key injection, App System Settings management, etc. Communications Configure communication parameters and settings. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 80: Merchant Settings

     Security Settings  Set Batch Time  Additional Prompts ESCRIPTION NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 81: Authorizations

    Params. menu press [1] 3.Set Batch Time 4.Additional Prompts for Authorizations. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 82
    1.CREDIT 2.DEBIT Press the number corresponding with your 3.EBT 4.GIFT selection. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 83
    Press the number corresponding with your 2.Always Enabled selection. 3.Pswd Protected Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 84: Card Types

    2.Security Settings menu press [1] for Authorizations 3.Set Batch Time 4.Additional Prompts NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 85
    Press accordingly to edit choose for Card Types 3.AMEX(EN) 4.DCI-DISC(EN) 5.Discover(EN) 6.enRoute(EN) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 86
    * An ‘EN’ indicates the card type is enabled and a ‘DIS‘ indicates disabled. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 87: Security Settings

     Disabled  Always Enabled(Default setting) Card Manual Entry  Password Protected NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 88: User Password

    Settings menu press [2] 3.Set Batch Time 4.Additional Prompts for Security Settings. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 89
    ******** password (MMDDYYYY), enter the OLD password then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 90
    Re-enter New Password: Re-enter the NEW ******** password then press [ENTER]. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 91: Batch

    Settings menu, press [2] to 3.Set Batch Time 4.Additional Prompts access Security Settings. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 92
    1.Always Enabled 2.Pswd Protected Press [1] to enable the function. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 93: Account Truncation

    Press [3] for Account Truncation. 3.Account Truncation 4.Secure Card 5.Card Manual Entry NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 94
    Account Truncation Scroll to select 1.OFF accordingly then press [ENTER]. 2.ON Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 95: Security Card

    Press [4] for Secure Card. 3.Account Truncation 4.Secure Card 5.Card Manual Entry NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 96
    Scroll to select the option 3.All Digits 4.Display Account then press [ENTER]. 5.Last4dgtsAndDisplay 6.AllDgtsAndDisplay Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 97: Card Manually Entry

    Press [5] for Card manual Entry. 3.Account Truncation 4.Secure Card 5.Card Manual Entry NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 98
    Scroll to select the option then press [ENTER]. 2.Always Enabled 3.Pswd Protected Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 99: Set Batch Time

    Settings menu, press [3] to 3.Set Batch Time 4.Additional Prompts set the batch time. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 100
    (If you select [2],go to 2.ON #6,Or you select [1],go to NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 101
    Input the desired time in military (24-hour) time and HH:MM press [ENTER] Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 102: Additional Prompts

    Settings menu press [4] 3.Set Batch Time 4.Additional Prompts for Additional Prompts. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 103
    1.OFF CashBack Prompt. 2.ON Press [2] to enable CashBack Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 104: Gift Sale Mode

    Additional Prompts. Please Enter Password Input the Password and ******** press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 105
    2.NoNSFSale Press [2] for NoNSFSale. 3.Prompt Press [3] for Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 106: Table Mode

    Additional Prompts. Please Enter Password Input the Password and ******** press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 107
    Press [1] to enable Table 1.ON Mode. 2.OFF Press [2] to disable Table Mode. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 108: Guest No. Mode

    Additional Prompts. Please Enter Password Input the Password and ******** press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 109
    Guest No. Mode. 2.OFF Press [2] to disable Guest No. Mode. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 110: Operation Settings

    [2] for Operation 3. Host Settings 4. System Settings Settings. 5. Communication NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 111
    Press [1] to disable the buzzer. 1.OFF 2.ON Press [2] to enable the buzzer. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 112
    Press [1] to disable the buzzer. 1.OFF 2.ON Press [2] to enable the buzzer. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 113: Operation Mode

    Settings menu, press [2] 2.Operation Mode for Operation Mode. 3.Halo Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 114
    Press [ENTER] to accept Are You Sure? the change. Press [CANCEL] to cancel. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 115
    If Multi Merchant is Multi-Merchant enabled, demo mode cannot be enabled. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 116: Halo Setup

    Settings menu, press [3] 2.Operation Mode to Set Halo values. 3.Halo Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 117
    Input the new maximum 0.00 amount for a sale then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 118
    The default setting is OFF. 1.OFF Press the number corresponding with your 2.ON selection. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 119
    Input the new maximum 0.00 amount for cash back then press [ENTER]. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 120: Host Settings

    5. Communication Please Enter Password Input the Password and ******** press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 121
    Press the number corresponding with your 2.Bank ID selection. 3.Terminal Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 122
    [ENTER]. (This is a sample of inputting Terminal ID) Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 123: Host Url Params

    [2] to enter 2.Hosts URL Params Hosts URL Params. 3.AutoDial Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 124
    Press the number 1.Host URL #1 corresponding with your selection. 2.Host URL #2 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 125
    Host Port Input the desired port number then press [ENTER]. 10. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 126: Autodial Setup

    [1] to enter 2.Hosts URL Params AutoDial Setup. 3.AutoDial Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 127
    START AD AT: Set the Start AutoDial 03:00 time and press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 128
    [ENTER]. AD INTERVAL: Set the AutoDial Interval and press [ENTER]. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 129: System Settings

    From the Main Menu press [1] to access 3.Keys Injection 4.App Management Date/Time Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 130
    Format. Verify the Date/time is now correct and press [CANCEL] Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 131: Working Mode

    [4] to access 3. Host Settings 4. System Settings System Settings 5. Communication NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 132: Working Mode

    [1] for Tip Options Please Enter Password Input the Password and ******** press [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 133
    Press [2] to enable tips for the selected EDC type. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 134: Fraud Control Option

    Address & Zip AVS will prompt for address and zip code CTION ISPLAY NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 135
    Working Mode 1.Tip Options Press [2] for Fraud Control. 2.Fraud Control NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 136
    2.Visa Press [1] for all card types. 3.MasterCard 4.AMEX 5.DCI-DISC 6.Discover NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 137
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 138
    2.Working Mode Press [2] for Working Mode. 3.Keys Injection 4.App Management NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 139
    Press [2] to set the AVS On CardPrsnt. 3.AVS OnCardNotPrsnt 4.Card Present 5.V-Code NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 140
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 141
    2.Working Mode Press [2] for Working Mode. 3.Keys Injection 4.App Management NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 142
    Press [3] to set the AVS OnCardNotPrsnt. 3.AVS OnCardNotPrsnt 4.Card Present 5.V-Code NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 143
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 144
    2.Working Mode Press [2] for Working Mode. 3.Keys Injection 4.App Management NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 145
    Press [4] to set the Card Present. 3.AVS OnCardNotPrsnt 4.Card Present 5.V-Code NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 146
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 147
    2.Working Mode Press [2] for Working Mode. 3.Keys Injection 4.App Management NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 148
    Press [4] to set the V-Code. 3.AVS OnCardNotPrsnt 4.Card Present 5.V-Code NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 149
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 150: Keys Injection

    4.App Management Injection. Please Enter Password: Input the Password and press [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 151
    After setup the baud rate then start session to communication. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 152
    S300_V1.00.00 User Manual NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 153: Application Management

    Press the number on the keypad that 5.App Info corresponds with your selection. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 154: Activate

    POS terminal connects to 1.Online the server to communicate. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 155
    Then POS terminal Activate displays communication Activated messages, “Activated” or error messages. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 156: App Update

    If Terminal prompts “Please register first” so please do Activate first. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 157
    After finish downloading, terminal displays “Success” and lists the downloaded applications. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 158: Configuration

    Press [2] to set Server Port and skip to Step 6. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 159
    Please Enter Server Port Set Server Port and press [ENTER]. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 160: Terminal Sn

    Screen displays the SN Manufacturer: and other information of Model: MT30 the terminal. ******** NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 161
    S300_V1.00.00 User Manual Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 162: App Info

    2.App Update Press [5] for App Info. 3.Configuration 4.Terminal SN 5.App Info NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 163
    Use the [▲] & [▼] keys or press [ENTER] to go forward. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 164: Communications

    5. Communication Please Enter Password: Input the Password and press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 165
    Main Comm.:1 Press the number 1.LAN corresponding with your selection. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 166: Maximum Tries

    3.Connect Timeout 4.Receive Timeout Maximum Tries. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 167
    Input the New tries # and press [ENTER] Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 168: Connect Timeout

    3.Connect Timeout 4.Receive Timeout Connect Timeout. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 169
    Input the New timeout and press [ENTER] Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 170: Receive Timeout

    3.Connect Timeout 4.Receive Timeout Receive Timeout. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 171
    Input the New timeout and press [ENTER] Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 172: Lan Parameters

    5. Communication Please Enter Password: Input the Password and press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 173
    Press [1] for DHCP. 1.DHCP 2.Static Press [2] for Static IP. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 174: Local Ip Address

    3.Connect Timeout 4.Receive Timeout for LAN parameters. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 175
    For static IP type, 192.168.1.101 Enter the address then press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 176: Netmask

    3.Connect Timeout 4.Receive Timeout for LAN parameters. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 177
    For static IP type, 255.255.255.0 Enter the address then press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 178: Gateway Ip Address

    3.Connect Timeout 4.Receive Timeout for LAN parameters. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 179
    For static IP type, 192.168.1.254 Enter the address then press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 180: Dns Ip

    3.Connect Timeout 4.Receive Timeout for LAN parameters. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 181
    For static IP type, 192.168.1.253 Enter the address then press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 182: Ecr Communication Type

    4.Receive Timeout for ECR Comm. Type. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 183
    Ethernet sub-menu. Comm. Port Input Comm. Port and 10009 press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 184: Function Menu Option

    [1]. Please Enter Password Input the Password and ******** press [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 185
    1.CREDIT(0) $0.00 screen to view the transactions. 2.DEBIT(0) $0.00 3.EBT(0) $0.00 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 186: Find

    (If the records is exist, continue to #4; Or it’s not exist, continue to #5.） NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 187
    Account:************6781 View the record. Record inexistence NO RECORD FOUND! prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 188: Appendix A — Troubleshooting

    Remove power source from terminal.  The terminal will be reset. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 189: Appendix B — Quick Reference Guide

    2. Find Enter the last 4 digits to find specific records. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 190: Main Menu

    ECR C Sets ECR Communication Type. Or view current setting. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 191: Appendix C- Broadpos Server Communication

    Note Monitor should be loaded ahead of time for PETE. TBD. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 192: Appendix D-Glossary

    Host computer for verification and processing. S300: terminal from PAX NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 193
    CID – American Express and Discover Card. CVC – MasterCard; CVV – Visa NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 194
    S300_V1.00.00 User Manual S300_V1.00.00 User Manual 2014-9-12…

Источник

Банковский эквайринг позволяет расширить возможности обслуживания клиентов путем приема оплаты платёжными картами.

Подайте заявление на официальном сайте банка и дождитесь ответа.

Подключение самого POS-терминала к устройству и установку необходимого ПО для работы осуществляет сотрудник банка. При интеграции под OC Windows рекомендуется использовать вспомогательное ПО DUAL Connector. Работа с терминалами по протоколу INPAS реализована через службу DC Service, которая является частью Dual Connector 2.0.

Для настройки терминала:

1. Скачайте и распакуйте установщик INPAS Dual Connector;

Скачанный файл установщика можно найти в папке «Загрузки». Он может выглядеть так:

2. Запустите скачанный файл, дважды кликнув на него. Нажмите «Выборочная установка», чтобы продолжить;

3. На следующем шаге необходимо выбрать вариант Dual Connector 2.х и отключить опцию DC Proxy. При необходимости вы можете изменить путь установки. Нажмите Установить, чтобы продолжить;

4. В процессе установки будет установлена платформа Java, если ранее на компьютере она не была установлена. Нажмите Install, чтобы завершить установку Java;

5. На некоторых версиях ОС Windows может потребоваться установка .Net Framework 3.5. Необходимо установку фреймворка выполнить не отдельно, а вкупе с Dual Connector 2.0.

Скачайте файл установки .Net Framework 3.5 по ссылке https://gbsmarket.ru/fls/net-framework-3-5-full/. Скачанный файл должен иметь имя dotnetfx35.exe. Переименуйте его, если имя отличается.

Скопируйте файл dotnetfx35.exe в ту же папку (директорию), где находится файл установки Dual Connector 2.0. В итоге это должно выглядеть, как на скриншоте;

6. После копирования файла dotnetfx35.exe, необходимо повторно запустить установщик Dual Connector 2.0. В процесс установки вы увидите сообщение о необходимости установить .Net Framework. Нажмите «Установить этот компонент»;

7. В случае успешной установки вы увидите окно с соответствующим сообщением. Включите опцию «Запустить DC Control» и нажмите «Завершить», чтобы закрыть установщик и перейти к процессу настройки подключения и проверки связи;

8. После установки Dual Connector 2.0 необходимо перезагрузить компьютер для запуска службы DC Service, которая отвечает за взаимодействие со сторонним ПО или сделать это вручную.

Для того чтобы запустить службу DC Service, откройте диспетчер задач и перейдите на вкладку «Службы».

Найдите в списке службу DC Service и запустите ее, после этого состояние службы изменится на «Выполняется»;

9. При подключении терминала через USB в приложении DC Control необходимо установить драйвера для терминала. Откройте вкладку USB Drivers, выберите производителя терминала и рекомендуемый драйвер, а затем нажмите «Установить».

10. В диспетчере устройств появится новое устройство в разделе «COM и LPT Порты». При этом терминал должен быть подключен к компьютеру.

11. Для того чтобы служба DC Service смогла соединиться с эквайринг-терминалом, необходимо указать корректные настройки подключения. Если терминал подключен через USB, необходимо указать номер COM-порта, который был создан при установке драйвера. После завершения настройки нажмите «Сохранить», чтобы изменения вступили в силу;

12. После завершения настройки необходимо убедиться, что связь с терминала устанавливается.
Перейдите на вкладку «Проверка связи» в приложении DC Control, включите пункт «Проверка связи с терминалом» и нажмите «Запуск».

Если все настройки выполнены верно, то вы увидите смену статуса на «Успех» в окне проверки связи

1. Откройте Меню → Настройки → Оборудование → Использовать банковский терминал и выберите ИНПАС;

2.Укажите ID терминала(номер TerminalID должен сообщить поставщик пинпада), TCP порт терминала указывается по умолчанию 9015;

3. Нажмите кнопку Сохранить. Устройство готово к работе. Можно приступать к продаже товара.

Источник

Банковский эквайринг позволяет расширить возможности обслуживания клиентов путем приема оплаты платёжными картами.

Подайте заявление на официальном сайте банка и дождитесь ответа.

Подключение самого POS-терминала к устройству и установку необходимого ПО для работы осуществляет сотрудник банка. При интеграции под OC Windows рекомендуется использовать вспомогательное ПО DUAL Connector. Работа с терминалами по протоколу INPAS реализована через службу DC Service, которая является частью Dual Connector 2.0.

Для настройки терминала:

1. Скачайте и распакуйте установщик INPAS Dual Connector;

Скачанный файл установщика можно найти в папке «Загрузки». Он может выглядеть так:

2. Запустите скачанный файл, дважды кликнув на него. Нажмите «Выборочная установка», чтобы продолжить;

3. На следующем шаге необходимо выбрать вариант Dual Connector 2.х и отключить опцию DC Proxy. При необходимости вы можете изменить путь установки. Нажмите Установить, чтобы продолжить;

4. В процессе установки будет установлена платформа Java, если ранее на компьютере она не была установлена. Нажмите Install, чтобы завершить установку Java;

5. На некоторых версиях ОС Windows может потребоваться установка .Net Framework 3.5. Необходимо установку фреймворка выполнить не отдельно, а вкупе с Dual Connector 2.0.

Скачайте файл установки .Net Framework 3.5 по ссылке https://gbsmarket.ru/fls/net-framework-3-5-full/. Скачанный файл должен иметь имя dotnetfx35.exe. Переименуйте его, если имя отличается.

Скопируйте файл dotnetfx35.exe в ту же папку (директорию), где находится файл установки Dual Connector 2.0. В итоге это должно выглядеть, как на скриншоте;

6. После копирования файла dotnetfx35.exe, необходимо повторно запустить установщик Dual Connector 2.0. В процесс установки вы увидите сообщение о необходимости установить .Net Framework. Нажмите «Установить этот компонент»;

7. В случае успешной установки вы увидите окно с соответствующим сообщением. Включите опцию «Запустить DC Control» и нажмите «Завершить», чтобы закрыть установщик и перейти к процессу настройки подключения и проверки связи;

8. После установки Dual Connector 2.0 необходимо перезагрузить компьютер для запуска службы DC Service, которая отвечает за взаимодействие со сторонним ПО или сделать это вручную.

Для того чтобы запустить службу DC Service, откройте диспетчер задач и перейдите на вкладку «Службы».

Найдите в списке службу DC Service и запустите ее, после этого состояние службы изменится на «Выполняется»;

9. При подключении терминала через USB в приложении DC Control необходимо установить драйвера для терминала. Откройте вкладку USB Drivers, выберите производителя терминала и рекомендуемый драйвер, а затем нажмите «Установить».

10. В диспетчере устройств появится новое устройство в разделе «COM и LPT Порты». При этом терминал должен быть подключен к компьютеру.

11. Для того чтобы служба DC Service смогла соединиться с эквайринг-терминалом, необходимо указать корректные настройки подключения. Если терминал подключен через USB, необходимо указать номер COM-порта, который был создан при установке драйвера. После завершения настройки нажмите «Сохранить», чтобы изменения вступили в силу;

12. После завершения настройки необходимо убедиться, что связь с терминала устанавливается.
Перейдите на вкладку «Проверка связи» в приложении DC Control, включите пункт «Проверка связи с терминалом» и нажмите «Запуск».

Если все настройки выполнены верно, то вы увидите смену статуса на «Успех» в окне проверки связи

1. Откройте Меню → Настройки → Оборудование → Использовать банковский терминал и выберите ИНПАС;

2.Укажите ID терминала(номер TerminalID должен сообщить поставщик пинпада), TCP порт терминала указывается по умолчанию 9015;

3. Нажмите кнопку Сохранить. Устройство готово к работе. Можно приступать к продаже товара.

INGENICO:

Инструкция по пользованию — Терминал Ingenico iWL2xx (.pdf; 1,33 МБ)

Инструкция по пользованию — Терминал Ingenico (.pdf; 601 KБ)

Инструкция по пользованию — Терминал Ingenico iCT2xx (.pdf; 994 KБ)

Инструкция по пользованию — Пин-пад Ingenico iPP2xx (.pdf; 678 KБ)

Инструкция по пользованию — Подключение пинпада IPP220 к терминалу ICT2x0  (.pdf; 113 KБ)

Инструкция по пользованию — Пин-пад Ingenico iPP 3×0 (.pdf; 992 KБ)

Инструкция по пользованию — Ingenico Desk 1500 (.pdf; 1 679 KБ)

Инструкция по пользованию — Ingenico Desk 3200 (.pdf; 637 KБ)

Инструкция по пользованию — Ingenico Move2500, Move3500, Desk3500, Link2500  (.pdf; 2 825 KБ)

Инструкция по пользованию — Ingenico Lane 3000 (.pdf; 1 679 KБ)

Инструкция по пользованию — Ingenico Lane 5000 (.pdf; 625 KБ)

Инструкция по пользованию — Ingenico Lane 7000 (.pdf; 1 144 KБ)

VERIFONE:

Инструкция по пользованию платежным POS-терминалом Verifone VX675 (.pdf; 526 KБ)

Руководство по установке Omni 5xxx и Verifone 5xx 6xx (.pdf; 1,7 MБ)

Инструкция по проведению операций по платежным картам с использованием терминала в торгово-сервисном предприятии (для терминалов VeriFone VX520, VX680) (.pdf; 309 KБ)

Инструкция по работе с терминалами Verifone (.pdf; 394 KБ)

Руководство пользователя (users guide) по работе с терминалом Verifone 1000se (англ) (.pdf; 409 KБ)

PAX:

Инструкция по работе с пин-падом PAX SP30 (.pdf; 2,27 МБ)

Справочное руководство по работе с терминалом PAX S90 (англ) (.pdf; 9863 KБ)

Руководство пользователя (users guide) по работе с терминалом PAX S90 (англ) (.pdf;3,70МБ)

Инструкция по пользованию — Пин-пад PAX D200 (.pdf; 1451 KБ)

Банковский платежный терминал (пин пад) PAX S300 под проект Прими Карту

Купить PAX S300 CTLS — стационарный банковский платежный терминал (пин пад).

PAX S300 предназначен для совместной работы со стационарными POS-терминалами, онлайн-кассами и POS-системами.

Широкие возможности по подключению и интеграции пин пада с банковскими платежными терминалами и кассовым программным обеспечением позволят организовать прием оплаты по магнитным, чиповым и бесконтактным банковским платежным картам на банковских платежных терминалах оплаты и на онлайн кассах Эвотор 5, Эвотор 7.2, Эвотор 7.3, Эвотор 10, Дримкас, АТОЛ, Штрих-М и других.

Поддержка современных бесконтактных технологий Apple Pay, Android Pay, Samsung Pay, Huawei Pay, Garmin Pay.

Подключите пин пад PAX S300 к одному из банков, предоставляющих эквайринг на льготных условиях с фиксированным тарифом 2%.

Цена PAX S300

14980

В наличии

3 года гарантии

Купить PAX S300

Пин пад PAX S300 CTLS
Комплект Прими Карту

Готовый комплект для приема оплаты банковскими картами с низким фиксированным тарифом за эквайринг и без требований к торговому обороту.

Для малого бизнеса

PAX S300 CTLS идеально подходит для интеграции с онлайн кассами, кассовым программным обеспечением и товаро-учетными системами «из коробки».

Комиссия за эквайринг 2%

Фиксированный тариф за эквайринг от банков ВТБ, Банк Русский Стандарт, Открытие или Бинбанк.

Доставка по России

Курьерская доставка или доставка транспортной компанией по России и регионам.

Техническая поддержка

По телефону бесплатной горячей линии 8-800 и через электронную почту в режиме 24/7.

Подключение PAX S300 CTLS к банку

Четыре простых шага и вы начнете принимать платежи по картам от клиентов. Без походов в банк и открытия нового или дополнительного расчетного счета.

1

Заполните заявку на подключение эквайринга

Получите консультацию по банковскому пин паду PAX S300 и процессу подключения к банку, предоставляющему услуги эквайринга с фиксированным тарифом.

2

Приобретите комплект оборудования

Купите пин пад PAX S300 — полностью готовый к работе пин пад для приема платежей по картам с подключением к банку — эквайеру.

3

Подготовьте пакет документов

Получите свой пин пад PAX S300 и направьте пакет необходимых документов в виде отсканированных копий.

Открытие нового или дополнительного расчетного счета и посещение банка не требуется.

4

Начните принимать платежи по картам

Дождитесь согласования со стороны службы безопасности банка. Подключите свой пин пад к онлайн-кассе, POS-системе или компьютеру с товаро-учетной системой, и начните принимать платежи по банковским картам, смартфонам и «умным» устройствам.

Нужно другое решение?

Мобильный переносной POS-терминал Verifone VX675 c подключением через WiFi или сим карту

Нужна мобильность?

Выберите переносной мобильный POS-терминал Verifone VX675 со встроенным аккумулятором и подключением через сим карту или беспроводную сеть WiFi.

Стационарный POS-терминал Verifone VX520 c подключением через локальную сеть или сим карту

Ищите стационарный терминал?

Выберите бестселлер российского рынка — банковский платежный POS-терминал Verifone VX520 ETHERNET c подключением через локальную сеть или версию GPRS с подключением через сим карту.

Драйверы и инструкции

Банковский пин пад (pinpad) PAX S300

Оформить заявку

Логотип ПАКС

Руководство по быстрой установке
Умный киоск SK300
ПАКС ТЕХНОЛОДЖИ ЛИМИТЕД

Контрольный список

Поздравляем с получением платежного терминала PAX Technology. Мы надеемся, что вам понравится! Только что открытая коробка должна содержать следующие предметы:

  • 1 смарт-киоск PAX SK300
  • 1 х SK300 Подвесной кронштейн
  • 1 рулон термобумаги
  • 4 комбинированных винта M2.5 * 4
  • 1 х адаптер питания
  • 1 х кабель питания
  • 1 маленькая отвертка с крестообразным шлицем (для SK300)
  • 4 шурупа ST5.0X40-PB с крестообразным шлицем и потайной головкой с наконечником
  • 4 x Винтовая расширяемая резиновая заглушка (специальный саморез 5.0 × 40)

 Описание товара:

Смарт-киоск PAX SK300 — рис. 1

Смарт-киоск PAX SK300 — рис. 2

Смарт-киоск PAX SK300 — рис. 3

Инструкция по использованию

  • Включение питания: подключите кабель питания переменного тока, нажмите и удерживайте кнопку питания в течение трех секунд, пока не появится анимация загрузки.
  • Выключение: нажмите и удерживайте кнопку питания в течение трех секунд, пока не появится меню выключения. Выберите Выключить. Терминал выключается через несколько секунд.

Варианты оплаты

Загрузите бумагу для принтера

  • Полностью откройте крышку принтера, Вставьте новый рулон бумаги в принтер и Закройте крышку принтера.

Смарт-киоск PAX SK300 — рис. 8

Установка рабочего стола

  • Полностью откройте крышку принтера, Вставьте новый рулон бумаги в принтер и Закройте крышку принтера.

Список деталей

Нет. часть Картина Кол-во/шт.
1 SK300 Киоск Смарт-киоск PAX SK300 — рис. 9 1
2 Зафиксируйте два винта Смарт-киоск PAX SK300 — рис. 10 2
3 M2.5 * 8
Комбинированный винт		 Смарт-киоск PAX SK300 — рис. 11 4

Настенный монтаж

Список деталей

Нет. часть Картина Кол-во/шт.
1 SK300 Киоск Смарт-киоск PAX SK300 — рис. 9 1
2 Зафиксируйте два винта Смарт-киоск PAX SK300 — рис. 12 2
3 M2.5 * 8
Комбинированный винт		 Смарт-киоск PAX SK300 — рис. 11 4
4 Подвесной кронштейн Смарт-киоск PAX SK300 — рис. 13 1

Советы по использованию

  • Встроенного аккумулятора нет, и устройство может питаться только от адаптера питания.
  • Не подвергайте устройство воздействию перегретой, влажной, пыльной или сильно электромагнитной среды.
  • Не вибрируйте, не трясите и не роняйте устройство.
  • Не вставляйте и не отключайте какие-либо части устройства, когда оно включено. В противном случае это может привести к повреждению внутренней цепи.
  • При необходимости обратитесь в службу технической поддержки PAX за помощью по устройству.
  • Перед использованием карты с магнитной полосой/IC/бесконтактной картой проверьте, нет ли поблизости подозрительных лиц, если есть, обратите внимание на защиту от кражи.

Параметры окружающей среды

  • Рабочая среда: температура: -10 ℃ ~ 50 ℃ (32 ℉ ~ 113 ℉) (без зарядки)
  • Условия хранения: Температура: -20 ℃ ~ 70 ℃ (-4 ℉ ~ 158 ℉) (без зарядки)
  • Влажность: 5%～96% (без конденсации)

 Иконки

Значок мусорной корзины  Утилизируйте профессиональным образом
Двойная изоляция  Оборудование класса II
только для внутреннего использования.  Для использования только внутри помещений
Умный киоск PAX SK300 - самбол 1  Маркировка энергоэффективности
Умный киоск PAX SK300 - самбол 2  Переменный токtage
Постоянный ток  Постоянный токtage
Умный киоск PAX SK300 - самбол 3  логотип microSD

Уведомление о товарном знаке:
Логотип microSD является товарным знаком SD-3C LLC.

Заявление FCC

  1. Это устройство соответствует требованиям части 15 правил FCC. Эксплуатация возможна при соблюдении следующих двух условий: (1) Это устройство не должно создавать вредных помех. (2) Это устройство должно принимать любые помехи, включая помехи, которые могут вызвать сбои в работе.
  2. Изменения или модификации, прямо не одобренные стороной, ответственной за соответствие, могут лишить пользователя права на эксплуатацию оборудования.

ПРИМЕЧАНИЕ:
Это оборудование было протестировано и признано соответствующим ограничениям для цифровых устройств класса B в соответствии с частью 15 правил FCC. Эти ограничения предназначены для обеспечения разумной защиты от вредных помех при установке в жилых помещениях. Это оборудование используется и может излучать радиочастотную энергию, и, если оно не установлено и не используется в соответствии с инструкциями, может создавать вредные помехи для радиосвязи. Однако нет гарантии, что помехи не возникнут в конкретной установке. Если это оборудование создает вредные помехи для радио- или телевизионного приема, что можно определить, выключив и включив оборудование, пользователю рекомендуется попытаться устранить помехи одним или несколькими из следующих способов:

  • Изменить ориентацию или местоположение приемной антенны.
  • Увеличьте расстояние между оборудованием и приемником.
  • Подключить оборудование к розетке в цепи, отличной от той, к которой подключен приемник.
  • Обратитесь за помощью к дилеру или опытному радио / телевизионному технику.

Чтобы соответствовать требованиям к радиочастотному излучению, между телом пользователя и устройством, включая антенну, должно поддерживаться минимальное расстояние 20 мм.

ЗАЯВЛЕНИЕ IC
Это устройство соответствует стандарту(ам) RSS, освобожденному от лицензии промышленности Канады. Эксплуатация зависит от следующих двух условий: (1) это устройство не должно создавать помех, и (2) это устройство должно принимать любые помехи, включая помехи, которые могут вызвать нежелательные работы устройства.
Данное оборудование соответствует ограничениям по радиационному излучению IC, установленным для неконтролируемой среды. Конечный пользователь должен следовать конкретным инструкциям по эксплуатации для соблюдения требований к радиочастотному излучению. Этот передатчик не должен располагаться рядом или работать совместно с какой-либо другой антенной или передатчиком.

Чтобы соответствовать требованиям к радиочастотному излучению, между телом пользователя и устройством, включая антенну, должно поддерживаться минимальное расстояние 20 мм.

Документы / Ресурсы

Умный киоск PAX SK300 [pdf] Руководство пользователя
SK300, V5PSK300, SK300 Смарт-киоск, Смарт-киоск, Киоск

Как установить эквайринг Pax S300 от Альфабанка и подключить к программе товара-учета Фронтол, Контур-маркет, 1С Розница 2.3/Розница 3.0

Рейтинг: 2/5 — 2
голосов

Как установить эквайринг Pax S300 от Альфа-Банка и подключить к программе товара-учета Фронтол, Контур-маркет, 1С Розница 2.3/Розница 3.0

Во-первых, важно понимать, что в некоторых случаях будет очень сложно подключить эквайринговой терминал pinpad/inpad pax s300 без специалиста из банка.

В каких случая такое происходит?

  • Когда вы приобрели эквайринг не у Альфа банка и там нету прошивки данного банка;
  • Терминал физически не исправен и не загорается при подключении к компьютеру;

При получении данного терминала он настроен как автономный/у вас нету оригинального мульти провода для подключения данного терминала к компьютеру посредством USB, COM-port’a или ethernet’a.

Если все эти условия учтены, то давайте попробуем разобраться!

Вторым важным моментом является то, что специалист из банка, партнер Альфы зачастую настроит эквайринг быстрее чем вы. Поэтому мы рекомендуем позвонить напрямую вашему менеджеру в Альфа-Банке бизнес и попросить перевести на специалиста по эквайрингу. Номера из интернета могут не дать желаемого результата, вас будут футболить, составлять заявки, но результата будет не много! Но лучше начать с этого. Специалиста из банка можно попросить подключить к вашему компьютеру через программы удаленного доступа, такие как Any Desk, Supremo или другие. При разговоре с оператором может потребоваться ваш ИНН, номер терминала (можно нажать единичку, и он отобразиться) или адрес установки.

Если специалисты из банка так сказать «морозятся» и не отвечают. То можно не ждать ответа от «Павликов Морозовых» и попробовать настроить оплату картой своими руками.

Драйвер эквайринга состоит из двух частей:

  • Сам файлик драйвера, который устанавливаться на устройство PAX S300 (его пруд пруди в интернете). Если при установки данного драйвера в Диспетчере устройств отображается восклицательный знак на желтом фоне, то проделайте эту инструкцию!
  • Программа Dual connector – для настройки и проверки эквайринга. Кстати, драйвер пунктом выше входит в пакет установки Dual connector.

Так же в некоторых случаях потребуется обработка для программы товара-учета. В 1с можно попробовать различные варианты, для них понадобиться дополнительная DLL. В контур-маркет можно выбрать необходимую галочку!

Источник
  • Page 1
    S300_V1.00.00 User Manual S300_V1.00.00 User Manual V20140912 PAX Technology, Inc. All Rights Reserved. duplicated, published, or disclosed without PAX prior written permission.

  • Page 2: Table Of Contents

    ………………….11 ERMINAL CREENS POS T ………………. 13 ERMINAL OMMUNICATION PTIONS NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 3
    5.5.2 Host URL Params …………………… 123 5.5.3 AutoDial Setup ……………………126 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 4
    C.2 PETE BroadPOS terminal side ………………..191 APPENDIX D–GLOSSARY ……………………. 192 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 5: Revision History

    Date Version Contact Change 2014/10/21 V2014912 W. Kammerer Initial Release support@pax.us NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 6: General Information

    It is required that this document is stored in a safe place for future reference and modifications. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 7: Document Convention

    S300_V1.00.00 User Manual 1.2 Document Convention — Failure to follow specific procedures and practices may result in personal Warning injury. — Failure to follow specific procedures and practices may result in damage to Caution the POS terminal device or other equipment. — Helpful hints and other important information about the use of the POS Note terminal device.

  • Page 8: Document Structure

    This document first introduces general information of BroadPOS Terminal Application for S300; secondly, it focuses on BroadPOS Terminal Application for S300 – PETE; thirdly, it introduces operation of Application Management; then it lists FAQ, glossary and index. This manual contains the following sections：…

  • Page 9: Authorized Use Permission

    1.4 Authorized Use Permission Unless explicitly stated otherwise all content included on this document, such as but not limited to text, images, logos, and slogans, is the property of PAX and is protected by U.S. and international copyright laws. Any other use, including the reproduction, modification, display or distribution, of the content on this system is strictly prohibited.

  • Page 10: Document Reference

    S300_V1.00.00 User Manual 1.5 Document Reference Title Date Version…

  • Page 11: Pax S300 Pos Terminal Overview

    5 lines of text. Screen Display Function menu screen: Function Menu 1.Review 2.Find NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 12
    1.Merchant Settings 2.Operation Settings 3. Hosts Settings 4. System Settings 5. Communication NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 13: Pos Terminal Communication Options

    The following chart summarizes the information regarding the different POS terminal model communication options. GPRS CDMA ODEL THERNET √ S300 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 14: Key Definitions

    Below are examples of the keypad layout of the S300 POS terminal. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 15: How To Load Application

    For Details of how to load application, please refer to BroadPOS Terminal–S300 support@pax.us Application Installation Guide or contact our support at NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 16: How To Do Transaction

    Swipe the Card, or manually enter the Account Number and Exp. Date. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 17
    MMYY format then press [ENTER]. (It can also be input on ECR) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 18
    [ENTER]. (It can be input on ECR) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 19
    Enter the V-code from the back of the credit card ▋ then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 20
    Enter the additional ▋ information for commercial card then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 21
    ECR will print the receipt. POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 22: Credit Return

    Swipe the Card, or manually enter the Account Number and Exp. Date. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 23
    [ENTER]. (It can be input on ECR) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 24
    Transaction Approved Please Sign Your Name Cardholder signs his/her name. Accept Cancel NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 25
    ECR will print the receipt. POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 26: Credit Auth

    Input the dollar amount of the transaction then press 0.00 [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 27
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 28: Credit Postauth

    Please Enter Trans. # Input the transaction # to ▋ be completed. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 29
    Enter the TAX amount for ▋ commercial card then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 30
    ECR will print the receipt. POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 31
    S300_V1.00.00 User Manual NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 32: Credit Forced

    Input the dollar amount of the transaction then press 0.00 [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 33
    Enter the additional ▋ information for commercial card then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 34
    ECR will print the receipt. POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 35
    S300_V1.00.00 User Manual NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 36: Credit Void Sale

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 37
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 38: Credit Void Return

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 39
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 40: Credit Void Post-Auth

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 41
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 42: Credit Void Forced

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 43
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 44: Debit Transaction

    Input the dollar amount of the transaction then press 0.00 [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 45
    4. $30.00 an item of cash back. 5. $50.00 6. Other Amount NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 46
    POS terminal will go back to the idle screen. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 47: Debit Return

    NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 48
    If the POS terminal failed to deliver the message to ECR, POS terminal will generate a reversal automatically before next transaction. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 49
    User Manual POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 50: Ebt Transaction

    Swipe the Card, or manually enter the Account Number and Exp. Date. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 51
    MMYY format then press [ENTER]. (It can also be input on ECR) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 52
    4. $30.00 press [ENTER] to 5. $50.00 6. Other Amount bypass. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 53
    Please Enter Voucher Number : Enter the Voucher number then press ▋ [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 54
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 55: Ebt Return

    NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 56
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 57: Ebt Balance Inquiry

    Press [1] for Food Stamp 1.FoodStamp 2.CashBenefit Press [2] for Cash Benefit NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 58
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 59: Gift Transaction

    Gift Sale Mode in 2.NoNSFSale Additional Prompts Merchant Settings, this step may not prompt. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 60
    Input the dollar amount of the transaction then press 0.00 [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 61
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 62: Gift Return

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 63
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 64: Gift Issue

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 65
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 66: Gift Add Value

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 67
    POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 68: Gift Balance Inquiry

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 69
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 70: Gift Void

    ******** When prompted, enter the password and then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 71
    The terminal contacts the Host Processor for an approval and deliver the message to ECR, ECR will print the receipt NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 72
    User Manual POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 73: Commercial Cards

    V-code and other AVS settings. Enter the information for all AVS and V-Code prompts. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 74
    NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 75
    ECR, ECR will print the receipt POS terminal will go back to the idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 76: Tip Adjust

    Press [4] to find transactions by Card Number. Skip to Step 7. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 77
    If the terminal does not find the transaction, it displays “NOT FOUND!” and backs to idle screen. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 78: Menu Option

    Press [CANCEL] or to return to the Idle Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 79: Main Menu Options

    Time & Date, Set working Mode, key injection, App System Settings management, etc. Communications Configure communication parameters and settings. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 80: Merchant Settings

     Security Settings  Set Batch Time  Additional Prompts ESCRIPTION NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 81: Authorizations

    Params. menu press [1] 3.Set Batch Time 4.Additional Prompts for Authorizations. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 82
    1.CREDIT 2.DEBIT Press the number corresponding with your 3.EBT 4.GIFT selection. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 83
    Press the number corresponding with your 2.Always Enabled selection. 3.Pswd Protected Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 84: Card Types

    2.Security Settings menu press [1] for Authorizations 3.Set Batch Time 4.Additional Prompts NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 85
    Press accordingly to edit choose for Card Types 3.AMEX(EN) 4.DCI-DISC(EN) 5.Discover(EN) 6.enRoute(EN) NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 86
    * An ‘EN’ indicates the card type is enabled and a ‘DIS‘ indicates disabled. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 87: Security Settings

     Disabled  Always Enabled(Default setting) Card Manual Entry  Password Protected NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 88: User Password

    Settings menu press [2] 3.Set Batch Time 4.Additional Prompts for Security Settings. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 89
    ******** password (MMDDYYYY), enter the OLD password then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 90
    Re-enter New Password: Re-enter the NEW ******** password then press [ENTER]. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 91: Batch

    Settings menu, press [2] to 3.Set Batch Time 4.Additional Prompts access Security Settings. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 92
    1.Always Enabled 2.Pswd Protected Press [1] to enable the function. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 93: Account Truncation

    Press [3] for Account Truncation. 3.Account Truncation 4.Secure Card 5.Card Manual Entry NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 94
    Account Truncation Scroll to select 1.OFF accordingly then press [ENTER]. 2.ON Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 95: Security Card

    Press [4] for Secure Card. 3.Account Truncation 4.Secure Card 5.Card Manual Entry NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 96
    Scroll to select the option 3.All Digits 4.Display Account then press [ENTER]. 5.Last4dgtsAndDisplay 6.AllDgtsAndDisplay Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 97: Card Manually Entry

    Press [5] for Card manual Entry. 3.Account Truncation 4.Secure Card 5.Card Manual Entry NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 98
    Scroll to select the option then press [ENTER]. 2.Always Enabled 3.Pswd Protected Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 99: Set Batch Time

    Settings menu, press [3] to 3.Set Batch Time 4.Additional Prompts set the batch time. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 100
    (If you select [2],go to 2.ON #6,Or you select [1],go to NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 101
    Input the desired time in military (24-hour) time and HH:MM press [ENTER] Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 102: Additional Prompts

    Settings menu press [4] 3.Set Batch Time 4.Additional Prompts for Additional Prompts. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 103
    1.OFF CashBack Prompt. 2.ON Press [2] to enable CashBack Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 104: Gift Sale Mode

    Additional Prompts. Please Enter Password Input the Password and ******** press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 105
    2.NoNSFSale Press [2] for NoNSFSale. 3.Prompt Press [3] for Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 106: Table Mode

    Additional Prompts. Please Enter Password Input the Password and ******** press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 107
    Press [1] to enable Table 1.ON Mode. 2.OFF Press [2] to disable Table Mode. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 108: Guest No. Mode

    Additional Prompts. Please Enter Password Input the Password and ******** press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 109
    Guest No. Mode. 2.OFF Press [2] to disable Guest No. Mode. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 110: Operation Settings

    [2] for Operation 3. Host Settings 4. System Settings Settings. 5. Communication NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 111
    Press [1] to disable the buzzer. 1.OFF 2.ON Press [2] to enable the buzzer. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 112
    Press [1] to disable the buzzer. 1.OFF 2.ON Press [2] to enable the buzzer. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 113: Operation Mode

    Settings menu, press [2] 2.Operation Mode for Operation Mode. 3.Halo Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 114
    Press [ENTER] to accept Are You Sure? the change. Press [CANCEL] to cancel. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 115
    If Multi Merchant is Multi-Merchant enabled, demo mode cannot be enabled. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 116: Halo Setup

    Settings menu, press [3] 2.Operation Mode to Set Halo values. 3.Halo Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 117
    Input the new maximum 0.00 amount for a sale then press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 118
    The default setting is OFF. 1.OFF Press the number corresponding with your 2.ON selection. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 119
    Input the new maximum 0.00 amount for cash back then press [ENTER]. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 120: Host Settings

    5. Communication Please Enter Password Input the Password and ******** press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 121
    Press the number corresponding with your 2.Bank ID selection. 3.Terminal Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 122
    [ENTER]. (This is a sample of inputting Terminal ID) Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 123: Host Url Params

    [2] to enter 2.Hosts URL Params Hosts URL Params. 3.AutoDial Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 124
    Press the number 1.Host URL #1 corresponding with your selection. 2.Host URL #2 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 125
    Host Port Input the desired port number then press [ENTER]. 10. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 126: Autodial Setup

    [1] to enter 2.Hosts URL Params AutoDial Setup. 3.AutoDial Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 127
    START AD AT: Set the Start AutoDial 03:00 time and press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 128
    [ENTER]. AD INTERVAL: Set the AutoDial Interval and press [ENTER]. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 129: System Settings

    From the Main Menu press [1] to access 3.Keys Injection 4.App Management Date/Time Setup NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 130
    Format. Verify the Date/time is now correct and press [CANCEL] Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 131: Working Mode

    [4] to access 3. Host Settings 4. System Settings System Settings 5. Communication NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 132: Working Mode

    [1] for Tip Options Please Enter Password Input the Password and ******** press [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 133
    Press [2] to enable tips for the selected EDC type. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 134: Fraud Control Option

    Address & Zip AVS will prompt for address and zip code CTION ISPLAY NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 135
    Working Mode 1.Tip Options Press [2] for Fraud Control. 2.Fraud Control NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 136
    2.Visa Press [1] for all card types. 3.MasterCard 4.AMEX 5.DCI-DISC 6.Discover NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 137
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 138
    2.Working Mode Press [2] for Working Mode. 3.Keys Injection 4.App Management NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 139
    Press [2] to set the AVS On CardPrsnt. 3.AVS OnCardNotPrsnt 4.Card Present 5.V-Code NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 140
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 141
    2.Working Mode Press [2] for Working Mode. 3.Keys Injection 4.App Management NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 142
    Press [3] to set the AVS OnCardNotPrsnt. 3.AVS OnCardNotPrsnt 4.Card Present 5.V-Code NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 143
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 144
    2.Working Mode Press [2] for Working Mode. 3.Keys Injection 4.App Management NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 145
    Press [4] to set the Card Present. 3.AVS OnCardNotPrsnt 4.Card Present 5.V-Code NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 146
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 147
    2.Working Mode Press [2] for Working Mode. 3.Keys Injection 4.App Management NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 148
    Press [4] to set the V-Code. 3.AVS OnCardNotPrsnt 4.Card Present 5.V-Code NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 149
    Press the number that corresponds to the 3.Zip 4.Address&Zip desired AVS Prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 150: Keys Injection

    4.App Management Injection. Please Enter Password: Input the Password and press [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 151
    After setup the baud rate then start session to communication. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 152
    S300_V1.00.00 User Manual NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 153: Application Management

    Press the number on the keypad that 5.App Info corresponds with your selection. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 154: Activate

    POS terminal connects to 1.Online the server to communicate. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 155
    Then POS terminal Activate displays communication Activated messages, “Activated” or error messages. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 156: App Update

    If Terminal prompts “Please register first” so please do Activate first. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 157
    After finish downloading, terminal displays “Success” and lists the downloaded applications. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 158: Configuration

    Press [2] to set Server Port and skip to Step 6. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 159
    Please Enter Server Port Set Server Port and press [ENTER]. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 160: Terminal Sn

    Screen displays the SN Manufacturer: and other information of Model: MT30 the terminal. ******** NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 161
    S300_V1.00.00 User Manual Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 162: App Info

    2.App Update Press [5] for App Info. 3.Configuration 4.Terminal SN 5.App Info NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 163
    Use the [▲] & [▼] keys or press [ENTER] to go forward. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 164: Communications

    5. Communication Please Enter Password: Input the Password and press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 165
    Main Comm.:1 Press the number 1.LAN corresponding with your selection. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 166: Maximum Tries

    3.Connect Timeout 4.Receive Timeout Maximum Tries. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 167
    Input the New tries # and press [ENTER] Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 168: Connect Timeout

    3.Connect Timeout 4.Receive Timeout Connect Timeout. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 169
    Input the New timeout and press [ENTER] Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 170: Receive Timeout

    3.Connect Timeout 4.Receive Timeout Receive Timeout. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 171
    Input the New timeout and press [ENTER] Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 172: Lan Parameters

    5. Communication Please Enter Password: Input the Password and press [ENTER]. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 173
    Press [1] for DHCP. 1.DHCP 2.Static Press [2] for Static IP. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 174: Local Ip Address

    3.Connect Timeout 4.Receive Timeout for LAN parameters. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 175
    For static IP type, 192.168.1.101 Enter the address then press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 176: Netmask

    3.Connect Timeout 4.Receive Timeout for LAN parameters. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 177
    For static IP type, 255.255.255.0 Enter the address then press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 178: Gateway Ip Address

    3.Connect Timeout 4.Receive Timeout for LAN parameters. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 179
    For static IP type, 192.168.1.254 Enter the address then press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 180: Dns Ip

    3.Connect Timeout 4.Receive Timeout for LAN parameters. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 181
    For static IP type, 192.168.1.253 Enter the address then press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 182: Ecr Communication Type

    4.Receive Timeout for ECR Comm. Type. 5.LAN Parameters 6.ECR Comm. Type NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 183
    Ethernet sub-menu. Comm. Port Input Comm. Port and 10009 press [ENTER]. Stop NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 184: Function Menu Option

    [1]. Please Enter Password Input the Password and ******** press [ENTER] NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 185
    1.CREDIT(0) $0.00 screen to view the transactions. 2.DEBIT(0) $0.00 3.EBT(0) $0.00 NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 186: Find

    (If the records is exist, continue to #4; Or it’s not exist, continue to #5.） NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 187
    Account:************6781 View the record. Record inexistence NO RECORD FOUND! prompt. Stop. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 188: Appendix A — Troubleshooting

    Remove power source from terminal.  The terminal will be reset. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 189: Appendix B — Quick Reference Guide

    2. Find Enter the last 4 digits to find specific records. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 190: Main Menu

    ECR C Sets ECR Communication Type. Or view current setting. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 191: Appendix C- Broadpos Server Communication

    Note Monitor should be loaded ahead of time for PETE. TBD. NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 192: Appendix D-Glossary

    Host computer for verification and processing. S300: terminal from PAX NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.

  • Page 193
    CID – American Express and Discover Card. CVC – MasterCard; CVV – Visa NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be duplicated, published, or disclosed without PAX prior written permission.
  • Page 194
    S300_V1.00.00 User Manual S300_V1.00.00 User Manual 2014-9-12…
Источник

INGENICO:

Инструкция по пользованию — Терминал Ingenico iWL2xx (.pdf; 1,33 МБ)

Инструкция по пользованию — Терминал Ingenico (.pdf; 601 KБ)

Инструкция по пользованию — Терминал Ingenico iCT2xx (.pdf; 994 KБ)

Инструкция по пользованию — Пин-пад Ingenico iPP2xx (.pdf; 678 KБ)

Инструкция по пользованию — Подключение пинпада IPP220 к терминалу ICT2x0  (.pdf; 113 KБ)

Инструкция по пользованию — Пин-пад Ingenico iPP 3×0 (.pdf; 992 KБ)

Инструкция по пользованию — Ingenico Desk 1500 (.pdf; 1 679 KБ)

Инструкция по пользованию — Ingenico Desk 3200 (.pdf; 637 KБ)

Инструкция по пользованию — Ingenico Move2500, Move3500, Desk3500, Link2500  (.pdf; 2 825 KБ)

Инструкция по пользованию — Ingenico Lane 3000 (.pdf; 1 679 KБ)

Инструкция по пользованию — Ingenico Lane 5000 (.pdf; 625 KБ)

Инструкция по пользованию — Ingenico Lane 7000 (.pdf; 1 144 KБ)

VERIFONE:

Инструкция по пользованию платежным POS-терминалом Verifone VX675 (.pdf; 526 KБ)

Руководство по установке Omni 5xxx и Verifone 5xx 6xx (.pdf; 1,7 MБ)

Инструкция по проведению операций по платежным картам с использованием терминала в торгово-сервисном предприятии (для терминалов VeriFone VX520, VX680) (.pdf; 309 KБ)

Инструкция по работе с терминалами Verifone (.pdf; 394 KБ)

Руководство пользователя (users guide) по работе с терминалом Verifone 1000se (англ) (.pdf; 409 KБ)

PAX:

Инструкция по работе с пин-падом PAX SP30 (.pdf; 2,27 МБ)

Справочное руководство по работе с терминалом PAX S90 (англ) (.pdf; 9863 KБ)

Руководство пользователя (users guide) по работе с терминалом PAX S90 (англ) (.pdf;3,70МБ)

Инструкция по пользованию — Пин-пад PAX D200 (.pdf; 1451 KБ)

Источник

Понравилась статья? Поделить с друзьями:
  • Мануалы на русском сузуки скайвэй
  • Руководство по эксплуатации двигателя ямз 238 скачать
  • Как сделать финансовый анализ предприятия пошаговая инструкция
  • Руководство по эксплуатации рав 4 2007 скачать
  • Лего boost инструкция по сборке робота