Телевизор lg 55un70006la инструкция по применению

Главная

♥ В закладки

Просмотр инструкции в pdf

Инструкция по эксплуатации телевизора LG 55UN70006LA.

Скачать инструкцию к телевизору LG 55UN70006LA (5,50 МБ)

Инструкции по эксплуатации телевизоров LG

« Инструкция к телевизору LG 32LM6390PLC

» Инструкция к телевизору LG 70UN73506LB

Вам также может быть интересно

Инструкция к стиральной машине LG M10B9LD1

Инструкция к холодильнику LG GA-M539ZVQZ

Инструкция к кондиционеру LG S12KWH

Инструкция к телевизору LG 50UK6750

Инструкция к телевизору LG NanoCell 65UK7550

Инструкция к микроволновой печи LG MJ3965BIS

Инструкция к холодильнику LG GC-B207GAQV

Инструкция к роботу-пылесосу LG VRF6540LV

Добавить комментарий

Имя *

Email *

Сайт

Комментарий

Сохранить моё имя, email и адрес сайта в этом браузере для последующих моих комментариев.

• Добавить инструкцию
• Заказать инструкцию
• Политика конфиденциальности

www.lg.com

Copyright © 2020 LG Electronics Inc. All Rights Reserved.

LED TV*

OWNER’S MANUAL

* LG LED TV applies LCD screen with LED backlights.

Safety and Reference

Please read this manual carefully before operating

your set and retain it for future reference.

*MFL71699323*

(2007-REV01)

2

ENGLISH_index

Warning! Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a risk

of electric shock to persons.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

•  TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS

WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

•  Do not place the TV and/or remote control in the following

environments:

—Keep the product away from direct sunlight.

—An area with high humidity such as a bathroom

—Near any heat source such as stoves and other devices that

produce heat.

—Near kitchen counters or humidifiers where they can easily be

exposed to steam or oil.

—An area exposed to rain or wind.

—Do not expose to dripping or splashing and do not place objects

filled with liquids, such as vases, cups, etc. on or over the

apparatus (e.g., on shelves above the unit).

—Near flammable objects such as gasoline or candles, or expose

the TV to direct air conditioning.

—Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/

explosion, malfunction or product deformation.

•  Ventilation

—Install your TV where there is proper ventilation. Do not install in

a confined space such as a bookcase.

—Do not install the product on a carpet or cushion.

—Do not block or cover the product with cloth or other materials

while unit is plugged in.

•  Take care not to touch the ventilation openings. When watching

the TV for a long period, the ventilation openings may become hot.

•  Protect the power cord from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a door, or walked upon.

Pay particular attention to plugs, wall outlets, and the point where

the cord exits the device.

•  Do not move the TV whilst the Power cord is plugged in.

•  Do not use a damaged or loosely fitting power cord.

•  Be sure to grasp the plug when unplugging the power cord. Do not

pull on the power cord to unplug the TV.

•  Do not connect too many devices to the same AC power outlet as

this could result in fire or electric shock.

•  Disconnecting the Device from the Main Power

—The power plug is the disconnecting device. In case of an

emergency, the power plug must remain readily accessible.

•  Do not let your children climb or cling onto the TV. Otherwise, the

TV may fall over, which may cause serious injury.

•  Outdoor Antenna Grounding (Can differ by country):

—If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits,

or where it can come in contact with such power lines or circuits

as death or serious injury can occur.

3

ENGLISH_index

•  Grounding (Except for devices which are not grounded.)

—TV with a three-prong grounded AC plug must be connected to

a three-prong grounded AC outlet. Ensure that you connect the

earth ground wire to prevent possible electric shock.

•  Never touch this apparatus or antenna during a lightning storm.

You may be electrocuted.

•  Make sure the power cord is connected securely to the TV and wall

socket if not secured damage to the Plug and socket may occur and

in extreme cases a fire may break out.

•  Do not insert metallic or inflammable objects into the product. If a

foreign object is dropped into the product, unplug the power cord

and contact the customer service.

•  Do not touch the end of the power cord while it is plugged in. You

may be electrocuted.

•  If any of the following occur, unplug the product

immediately and contact your local customer service.

—The product has been damaged.

—If water or another substance enters the product (like an AC

adapter, power cord, or TV).

—If you smell smoke or other odors coming from the TV

—When lightning storms or when unused for long periods of time.

Even the TV is turned off by remote control or button, AC power

source is connected to the unit if not unplugged in.

•  Do not use high voltage electrical equipment near the TV (e.g., a

bug zapper). This may result in product malfunction.

•  Do not attempt to modify this product in any way without written

authorization from LG Electronics. Accidental fire or electric shock

can occur. Contact your local customer service for service or repair.

Unauthorized modification could void the user’s authority to

operate this product.

•  Use only an authorized attachments / accessories approved by

LG Electronics. Otherwise, this may result in fire, electric shock,

malfunction, or product damage.

•  Never disassemble the AC adapter or power cord. This may result in

fire or electric shock.

•  Handle the adapter carefully to avoid dropping or striking it. An

impact could damage the adapter.

•  To reduce the risk of fire or electrical shock, do not touch the TV

with wet hands. If the power cord prongs are wet or covered with

dust, dry the power plug completely or wipe dust off.

•  Batteries

—Store the accessories (battery, etc.) in a safe location out of the

reach of children.

—Do not short circuit, disassemble, or allow the batteries to

overheat. Do not dispose of batteries in a fire. Batteries should

not be exposed to excessive heat.

—Caution: Risk of fire or explosion if the battery is replaced by an

incorrect type.

•  Moving

—When moving, make sure the product is turned off, unplugged,

and all cables have been removed. It may take 2 or more people

to carry larger TVs. Do not press or put stress on the front panel

of the TV. Otherwise, this may result in product damage, fire

hazard or injury.

•  Keep the packing anti-moisture material or vinyl packing out of the

reach of children.

•  Do not allow an impact shock, any objects to fall into the product,

and do not drop anything onto the screen.

•  Do not press strongly upon the panel with a hand or a sharp

object such as a nail, pencil, or pen, or make a scratch on it. It may

cause damage to screen.

•  Cleaning

—When cleaning, unplug the power cord and wipe gently with a

soft/dry cloth. Do not spray water or other liquids directly on the

TV. Do not clean your TV with chemicals including glass cleaner,

any type of air freshener, insecticide, lubricants, wax (car,

industrial), abrasive, thinner, benzene, alcohol etc., which can

damage the product and/or its panel. Otherwise, this may result

in electric shock or product damage.

4

ENGLISH_index

Preparing

•  If the TV is turned on for the first time after it was shipped from the

factory, initialization of the TV may take a few minutes.

•  Image shown may differ from your TV.

•  Your TV’s OSD (On Screen Display) may differ slightly from that

shown in this manual.

•  The available menus and options may differ from the input source

or product model that you are using.

•  New features may be added to this TV in the future.

•  The device must be easily accessed to a location outlet near the

access. Some devices are not made by turning on / off button,

turning off the device and unplugging the power cord.

•  The items supplied with your product may vary depending on the

model.

•  Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

•  For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

A

B

A

B

*A

10 mm

*B

18 mm

•  Use a certified cable with the HDMI logo attached.

•  If you do not use a certified HDMI cable, the screen may not display

or a connection error may occur.

•  Recommended HDMI Cable Types

—Ultra High Speed HDMI®/™ cable (3 m or less)

Separate Purchase

Separate purchase items can be changed or modified for quality

improvement without any notification. Contact your dealer to buy these

items. These devices only work with certain models.

The model name or design may be changed depending on the upgrade

of product functions, manufacturer’s circumstances or policies.

Magic Remote Control

(Depending on model)

MR20GA

Check whether your TV model supports Bluetooth in the Wireless

Module Specification to verify whether it can be used with the Magic

Remote.

5

ENGLISH_index

Wall Mounting Bracket

(Depending on model)

Make sure to use screws and wall mount bracket that meet the VESA

standard. Standard dimensions for the wall mount kits are described in

the following table.

Model

43UN70*

50UN70*

55UN70*

65UN70*

VESA (A x B) (mm) 300 x 300 400 x 300

Standard screw M6 M6

Number of screws 4 4

Wall mount bracket

(optional)

Buy a suitable wall mount kit in

the market by referring to this

table for each model.

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched

or damaged and for safe transportation regardless of its type and size.

•  It is recommended to move the TV in the box or packing material

that the TV originally came in.

•  Before moving or lifting the TV, disconnect the power cord and

all cables.

•  When holding the TV, the screen should face away from you to

avoid damage.

•  Hold the top and bottom of the TV frame firmly. Make sure not to

hold the transparent part, speaker, or speaker grill area.

•  When transporting a large TV, there should be at least 2 people.

•  When transporting the TV by hand, hold the TV as shown in the

following illustration.

•  When transporting the TV, do not expose the TV to jolts or

excessive vibration.

•  When transporting the TV, keep the TV upright, never turn the TV

on its side or tilt towards the left or right.

•  Do not apply excessive pressure to cause flexing / bending of frame

chassis as it may damage screen.

•  When handling the TV, be careful not to damage the protruding

buttons.

6

ENGLISH_index

•  Avoid touching the screen at all times, as this may result in

damage to the screen.

•  When attaching the stand to the TV set, place the screen

facing down on a cushioned table or flat surface to protect

the screen from scratches.

Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

•  Leave a 10 cm (minimum) space from the wall for proper

ventilation.

10 cm

10 cm

10 cm

10 cm

10 cm

(Depending on model)

2 Connect the power cord to a wall outlet.

•  Do not apply foreign substances (oils, lubricants, etc.) to

the screw parts when assembling the product. (Doing so

may damage the product.)

•  If you install the TV on a stand, you need to take actions

to prevent the product from overturning. Otherwise, the

product may fall over, which may cause injury.

•  Do not use any unapproved items to ensure the safety and

product life span.

•  Any damage or injuries caused by using unapproved items

are not covered by the warranty.

•  Make sure that the screws are inserted correctly and

fastened securely. (If they are not fastened securely

enough, the TV may tilt forward after being installed.)

Do not use too much force and over tighten the screws;

otherwise screw may be damaged and not tighten

correctly.

Securing TV to the Wall

(Depending on model)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back

of the TV.

•  If there are bolts inserted at the eye-bolts position, remove the

bolts first.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear

of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

•  Use a platform or cabinet that is strong and large enough to

support the TV securely.

•  Brackets, bolts and ropes are not provided. You can obtain

additional accessories from your local dealer.

7

ENGLISH_index

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the TV carefully

and install the wall mount bracket on a solid wall perpendicular to

the floor. When you attach the TV to other building materials, please

contact qualified personnel. LG recommends that wall mounting be

performed by a qualified professional installer. Please use a wall mount

bracket where the device is adequately secured to the wall with enough

space to allow connectivity to external devices. It is advised to connect

all the cables before installing fixed wall mounts.

10 cm

10 cm

10 cm

10 cm

10 cm

(Depending on model)

•  Remove the stand before installing the TV on a wall

mount by performing the stand attachment in reverse.

•  For more information of screws and wall mount bracket,

refer to the Separate purchase.

•  If you intend to mount the product to a wall, attach VESA

standard mounting interface (optional parts) to the back

of the product. When you install the set to use the wall

mounting bracket (optional parts), fix it carefully so as

not to drop.

•  When mounting a TV on the wall, make sure not to install

the TV by hanging the power and signal cables on the

back of the TV.

•  Do not install this product on a wall if it could be exposed

to oil or oil mist. This may damage the product and cause

it to fall.

•  When installing the wall mounting bracket, it is recommended to

cover the stand hole using tape, in order to prevent the influx of

dust and insects. (Depending on model)

Stand hole

8

ENGLISH_index

Connections

Connect various external devices to the TV and switch input modes to

select an external device. For more information of external device’s

connection, refer to the manual provided with each device.

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

•  Use a signal splitter to use more than 2 TVs.

•  If the image quality is poor, install a signal amplifier properly to

improve the image quality.

•  If the image quality is poor with an antenna connected, try to

realign the antenna in the correct direction.

•  An antenna cable and converter are not supplied.

•  For a location that is not supported with ULTRA HD broadcasting,

this TV cannot receive ULTRA HD broadcasts directly.

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF

cable (75 Ω). (Depending on model)

CI module

View the encrypted (pay) services in digital TV mode. (Depending on

model)

•  Check if the CI module is inserted into the PCMCIA card slot in the

right direction. If the module is not inserted properly, this can

cause damage to the TV and the PCMCIA card slot.

•  If the TV does not display any video and audio when CI+ CAM is

connected, please contact to the Terrestrial/Cable/Satellite Service

Operator.

Other connections

Connect your TV to external devices. For the best picture and audio

quality, connect the external device and the TV with the HDMI cable.

Some separate cable is not provided.

HDMI

•  When connecting the HDMI cable, the product and external devices

should be turned off and unplugged.

•  Supported HDMI Audio format:

(Depending on model)

True HD (48 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

•  [Picture] [Additional Settings] [HDMI Ultra

HD Deep Colour]

—On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

—Off: Support 4K @ 50/60 Hz (4:2:0)

If the device connected to Input Port also supports Ultra HD Deep

Colour, your picture may be clearer. However, if the device doesn’t

support it, it may not work properly. In that case, change the TV’s

[HDMI Ultra HD Deep Colour] setting to off.

USB

Some USB Hubs may not work. If a USB device connected using a USB

Hub is not detected, connect it to the USB port on the TV directly.

9

ENGLISH_index

External Devices

Available external devices are: Blu-ray player, HD receivers, DVD players,

VCRs, audio systems, USB storage devices, PC, gaming devices, and

other external devices.

•  The external device connection may differ from the model.

•  Connect external devices to the TV regardless of the order of the

TV port.

•  If you record a TV program on a Blu-ray/DVD recorder or VCR, make

sure to connect the TV signal input cable to the TV through a DVD

recorder or VCR. For more information of recording, refer to the

manual provided with the connected device.

•  Refer to the external equipment’s manual for operating

instructions.

•  If you connect a gaming device to the TV, use the cable supplied

with the gaming device.

•  In PC mode, there may be noise associated with the resolution,

vertical pattern, contrast or brightness. If noise is present, change

the PC output to another resolution, change the refresh rate to

another rate or adjust the brightness and contrast on the [Picture]

menu until the picture is clear.

•  In PC mode, some resolution settings may not work properly

depending on the graphics card.

•  If ULTRA HD content is played on your PC, video or audio may

become disrupted intermittently depending on your PC’s

performance. (Depending on model)

•  When connecting via a wired LAN, it is recommended to use a CAT

7 cable. (Only when port is provided.)

Using Button

You can simply operate the TV functions, using the button.

Basic functions

Power On (Press)

Power Off 1 (Press and Hold)

Menu Control (Press 2)

Menu Selection (Press and Hold 3)

1 All running apps will close, and any recording in progress will stop.

(Depending on country)

2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust

the Menu items using the button.

Turns the power off.

Changes the input source.

Adjusts the volume level.

Scrolls through the saved programmes.

10

ENGLISH_index

Using Remote Control

(Depending on model)

The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5

V AAA) matching the and ends to the label inside the

compartment, and close the battery cover.

Make sure to point the remote control toward the remote control sensor

on the TV.

1 1

1

1

1

(Some buttons and services may not be provided depending on models

or regions.)

** To use the button, press and hold for more than 1 second.

(POWER) Turns the TV on or off.

Selects Radio, TV and DTV programme.

(SEARCH) Check for recommended content. (Some

recommended services may not be available in some countries.)

Search for content such as TV programmes, movies and other videos,

or perform a web search by entering text in the search bar.

Recalls your preferred subtitle in digital mode.

(Q. Settings) Accesses the Quick Settings.

(INPUT) Changes the input source.

Number buttons Enters numbers.

Accesses the [Quick Help].

Accesses the saved programmes list.

(MORE ACTIONS) Displays more remote control functions.

Edits QUICK ACCESS.

—QUICK ACCESS is a feature that allows you to enter a specified app

or Live TV directly by pressing and holding the number buttons.

Adjusts the volume level.

Audio descriptions function will be enabled.

Accesses your favorite channel list.

Shows programme guide.

(MUTE) Mutes all sounds.

(MUTE) Accesses the [Accessibility] menu.

Scrolls through the saved programmes.

1 Streaming Service buttons Connects to the Video Streaming

Service.

(HOME) Accesses Home menu.

(HOME) Shows the previous history.

Set the sleep timer.

Returns to the previous level.

Clears on-screen displays and returns to TV viewing.

Navigation buttons (up/down/left/right) Scrolls through menus

or options.

(OK) Selects menus or options and confirms your input.

(Teletext buttons) These buttons are used for

teletext.

Starts to record and displays record menu. (Only Time

MachineReady supported model)

(Energy Saving) Adjusts the brightness of the screen to

reduce energy.

(Control buttons) Control buttons for media

contents.

, , , These access special functions in some menus.

11

ENGLISH_index

•  Do not mix new batteries with old batteries. This may

cause the batteries to overheat and leak.

•  Failure to match the correct polarities of the battery

may cause the battery to burst or leak, resulting in fire,

personal injury, or ambient pollution.

•  This apparatus uses batteries. In your community there

might be regulations that require you to dispose of these

batteries properly due to environmental considerations.

Please contact your local authorities for disposal or

recycling information.

•  Batteries inside or inside the product shall not be exposed

to excessive heat such as sunshine, fire or the like.

User Guide

For more information about this TV, read the USER GUIDE embedded in

the product.

•  To open the USER GUIDE → → [Support] → [User

Guide]

Troubleshooting

Cannot control the TV with the remote control.

•  Check the remote control sensor on the product and try again.

•  Check if there is any obstacle between the product and the remote

control.

•  Check if the batteries are still working and properly installed (

to , to ).

No image display and no sound is produced.

•  Check if the product is turned on.

•  Check if the power cord is connected to a wall outlet.

•  Check if there is a problem in the wall outlet by connecting other

products.

The TV turns off suddenly.

•  Check the power control settings. The power supply may be

interrupted.

•  Check if the auto-off function is activated on the settings related

time.

•  If there is no signal while the TV is on, the TV will turn off

automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), no signal is detected.

•  Turn the TV off/on using the remote control.

•  Reconnect the HDMI cable.

•  Restart the PC with the TV on.

12

ENGLISH_index

Abnormal Display

•  If the product feels cold to the touch, there may be a small “flicker”

when it is turned on. This is normal, there is nothing wrong with

product.

•  This panel is an advanced product that contains millions of pixels.

You may see tiny black dots and/or brightly coloured dots (red, blue

or green) at a size of 1 ppm on the panel. This does not indicate a

malfunction and does not affect the performance and reliability

of the product.

This phenomenon also occurs in third-party products and is not

subject to exchange or refund.

•  You may find different brightness and colour of the panel

depending on your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel.

It is not related with the product performance, and it is not

malfunction.

•  Displaying a still image for a prolonged period of time may cause

image sticking. Avoid displaying a fixed image on the TV screen for

a long period of time.

Generated Sound

•  “Cracking” noise: A cracking noise that occurs when watching or

turning off the TV is generated by plastic thermal contraction due

to temperature and humidity. This noise is common for products

where thermal deformation is required.

•  Electrical circuit humming/panel buzzing: A low level noise is

generated from a high-speed switching circuit, which supplies a

large amount of current to operate a product. It varies depending

on the product.

This generated sound does not affect the performance and

reliability of the product.

•  When cleaning the product, be careful not to allow any

liquid or foreign objects to enter the gap between the

upper, left or right side of the panel and the guide panel.

(Depending on model)

•  Make sure to wring any excess water or cleaner from the

cloth.

•  Do not spray water or cleaner directly onto the TV screen.

•  Make sure to spray just enough of water or cleaner onto a

dry cloth to wipe the screen.

13

ENGLISH_index

Specifications

(Depending on country)

Broadcasting Specifications

Digital TV Analogue TV

Television system

DVB-T/T2

DVB-C

DVB-S/S2

PAL/SECAM B/G/I/D/K

SECAM L

Channel coverage

(Band)

DVB-S/S2 DVB-C DVB-T/T2

46 ~ 862 MHz

950 ~ 2,150 MHz 46 ~ 890 MHz

VHF III: 174 ~ 230 MHz

UHF IV: 470 ~ 606 MHz

UHF V: 606 ~ 862 MHz

S Band II: 230 ~ 300 MHz

S Band III: 300 ~ 470 MHz

Maximum number of

storable programmes 6,000 3,000

External antenna

impedance 75 Ω

CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm

Wireless module (LGSBWAC02) specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency Range Output Power (Max.)

2400 to 2483.5 MHz

5150 to 5725 MHz

5725 to 5850 MHz

17 dBm

19 dBm

10.5 dBm

Bluetooth

Frequency Range Output Power (Max.)

2400 to 2483.5 MHz 8.5 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional

frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

* IEEE 802.11ac is not available in all countries.

14

ENGLISH_index

Environment condition

Operating Temperature 0 °C to 40 °C

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C

Storage Humidity Less than 85 %

•  For information of the power supply and power consumption, refer to the label attached to the product.

—The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.

* On some models, the label is inside the external device connection terminal cover.

* Depending on the model or country, the typical power consumption may not be on label.

15

ENGLISH_index

Open Source Software

Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source

licenses, that is contained in this product, please visit http://opensource.

lge.com.

In addition to the source code, all referred license terms, warranty

disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM

for a charge covering the cost of performing such distribution (such

as the cost of media, shipping, and handling) upon email request to

opensource@lge.com.

This offer is valid for a period of three years after our last shipment of

this product. This offer is valid to anyone in receipt of this information.

Licenses

(Magic Remote supported models only)

16

ENGLISH_index

17

ENGLISH_index

The model and serial number of the product are located

on the back and on one side of the product. Record them

below in case you ever need service.

Model

Serial No.