Стиральная машина haier hw80 b14876 инструкция

• Contents

• Table of Contents

• Troubleshooting

• Bookmarks

Summary of Contents for Haier HW80-B14876

Главная

♥ В закладки

Просмотр инструкции в pdf

Инструкция по эксплуатации стиральной машины Haier HW80-B14876.

Скачать инструкцию к стиральной машине Haier HW80-B14876 (13,53 МБ)

Инструкции по эксплуатации стиральных машин Haier

« Инструкция к стиральной машине AEG L6SE26SRE

» Инструкция к стиральной машине Hotpoint-Ariston NLM 11 824 WC A RU

Вам также может быть интересно

Инструкция к водонагревателю Haier ES50V-B1

Инструкция к холодильнику Haier HRF-541DY7RU

Инструкция к микроволновой печи Haier HMX-DM259X

Инструкция к телевизору Smart TV Haier LE32K6600SG

Инструкция к стиральной машине Haier HWD100-B14979

Инструкция к телевизору Haier LE32F6000T

Инструкция к стиральной машине Haier HW90-B14979S

Инструкция к телевизору Smart TV Haier LE24K6500SA

Добавить комментарий

Имя *

Email *

Сайт

Комментарий

Сохранить моё имя, email и адрес сайта в этом браузере для последующих моих комментариев.

• Добавить инструкцию
• Заказать инструкцию
• Политика конфиденциальности

EN

User manual

Washing machine

HW80-B14876

HW100-B14876

Thank You EN

2

Legend

Warning – Important Safety information

General information and tips

Environmental information

Disposal

Help protect the environment and human health. Put

the packaging in applicable containers to recycle it.

Help to recycle waste of electrical and electronic ap-

pliances. Do not dispose appliances marked with this

symbol with the household waste. Return the product

to your local recycling facility or contact your municipal

oce.

Thank you for purchasing a Haier Product.

Please read these instructions carefully before using this appliance. The instructions con-

tain important information which will help you get the best out of the appliance and ensure

safe and proper installation, use and maintenance.

Keep this manual in a convenient place so you can always refer to it for the safe and proper

use of the appliance.

If you sell the appliance, give it away, or leave it behind when you move house, make sure

you also pass this manual so that the new owner can become familiar with the appliance

and safety warnings.

WARNING!

Risk of injury or suocation!

Disconnect the appliance from the mains supply. Cut o the mains cable and dispose

of it. Remove the door catch to prevent children and pets to get closed in the appliance.

EN Content

3

1-Safety information …………………………………………………………………………………………………………… 4

2-Product description …………………………………………………………………………………………………………. 7

3-Control panel …………………………………………………………………………………………………………………… 8

4-Programmes …………………………………………………………………………………………………………………..12

5-Consumption ………………………………………………………………………………………………………………….13

6-Daily use ………………………………………………………………………………………………………………………….14

7-Eco-friendly washing ……………………………………………………………………………………………………..19

8-Care and cleaning …………………………………………………………………………………………………………..20

9-Troubleshooting ……………………………………………………………………………………………………………..23

10-Installation …………………………………………………………………………………………………………………….26

11-Technical data ……………………………………………………………………………………………………………….30

12-Customer service …………………………………………………………………………………………………………32

1-Safety information EN

4

Before switching on the appliance for the rst time read the follow—

ing safety hints!:

WARNING!

Before rst use

▶Make sure there is no transport damage.

▶Make sure all transport bolts are removed.

▶Remove all packaging and keep out of children´s reach.

▶Handle the appliance always with at least two persons because it

is heavy.

Daily use

▶This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental ca-

pabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

▶Keep away children under 3 years of age from the appliance un-

less they are constantly supervised.

▶Children shall not play with the appliance.

▶Do not let children or pets come close to the appliance when the

door is open.

▶Store washing agents out of reach of children.

▶Pull up zips, x loose threads and take care for small items to pre—

vent laundry from being entangled. If necessary, use an appropri-

ate bag or net.

▶Do not touch or use the appliance when barefoot or with wet or

damp hands or feet.

▶Do not cover or encase the appliance during operation or after—

wards to allow any moisture or dampness to evaporate.

▶Do not place heavy objects or sources of heat or damp on top of

the appliance.

▶Do not use or store flammable detergent or dry cleaning agent in

close vicinity to the appliance.

▶Do not use any flammable sprays in close vicinity to the appliance.

▶Do not wash any garments treated with solvents in the appliance

without having dried them previously in the air.

EN 1-Safety information

5

WARNING!

Daily use

▶Do not remove or insert the plug in the presence of flammable

gas

▶Do not hot wash foam rubber or sponge-like materials.

▶Do not wash any laundry which is polluted with flour.

▶Do not open detergent drawer during any wash cycle.

▶Do not touch the door during the washing process, it gets hot.

▶Do not open the door if the water level is visibly over the porthole.

▶Do not force the door to open. The door is tted with a self-lock

device and will open shortly after the washing procedure is ended.

▶Switch o the appliance after each wash programme and before

undertaking any routine maintenance and disconnect the appli-

ance from the electrical supply to save electricity and for safety.

▶Hold the plug, not the cable, when unplugging the appliance.

Maintenance / cleaning

▶Make sure children are supervised if they carry out cleaning and

maintenance.

▶Disconnect the appliance from the electrical supply before un-

dertaking any routine maintenance.

▶Keep the lower part of the porthole clean and open door and de-

tergent drawer if appliance is not in use to prevent odours.

▶Do not use water spray or steam to clean the appliance.

▶Replace a damaged supply cord only by the manufacturer, its ser—

vice agent or similarly qualied persons in order to avoid a hazard.

▶Do not try to repair the appliance by yourself. In case of repair

please contact our customer service.

Installation

▶The appliance should be placed in a well-ventilated place. Ensure

a location which allows opening the door fully.

▶Never install the appliance outdoors in a damp place, or in an area

which may be prone to water leaks such as under or near a sink

unit. In the event of a water leak cut power supply and allow the

machine to dry naturally.

1-Safety information EN

6

Intended use

This appliance is intended for washing machine-washable laun-

dry only. Anytime follow the instructions given on the label of each

garment label. It is designed exclusively for domestic use inside the

house. It is not intended for commercial or industrial use.

Changes or modications to the device are not allowed. Unintended

use may cause hazards and loss of of all warranty and liability claims.

WARNING!

Installation

▶Install or use the appliance only where the temperature is above

5 °C.

▶Do not place the appliance directly on a carpet, or close to a wall

or furniture.

▶Do not install the appliance in direct sunlight or in the near of heat

sources(e.g. stoves, heaters).

▶Make sure that the electrical information on the rating plate

agrees with the power supply. If it does not, contact an electri-

cian.

▶Do not use multi-plug adapters and extension cables.

▶Make sure only the delivered electric cable and hose set are used.

▶Make sure not to damage the electric cable and the plug. If dam-

aged have it replaced by an electrician.

▶Use a separate earthed socket for the power supply which is easy

accessible after installation. The appliance must be earthed.

Only for UK: The appliance’s power cable is tted with 3-cord

(grounding) plug that ts a standard 3-cord (grounded) socket.

Never cut o or dismount the third pin (grounding). After the ap—

pliance is installed, the plug should be accessible.

▶Make sure the hose joints and connections are rm and there is

no leakage.

EN 2-Product description

7

2.1 Picture of appliance

Front (Fig. 2-1): Rear side (Fig. 2-2):

2.2 Accessories

Check the accessories and literature in accordance with this list (Fig.:2-3):

Note:

—

2-3

Underwear

Sport

Anti-allergy

Daily Wash

Synthetic

Mix

Baby Care Hygienic

Self Clean

Spin/Drain

Express15 min

Duvet

Delicate

Wool

Temp. SpeedDelay Start/PauseExtra

Rinse

Cotton Cotton+ HW80-B14876

Steam

8kg

I1

R5

R9 R10 R6

R7

R8

1 Detergent /

Softener drawer

2 Work top

3 Display

4 Programme selector

5 Panel

6 Service flap

7 Adjustable feet

8 Door handle

1 Iron bar (I1 — I2)

2 Transportation bolts (T1-T4)

3 Rear wall reinforcement

(HW80:1 pcs;HW100:2 pcs)

4 Power cord

5 Water inlet vave

6 Drain hose

7 Rear wall reinforcement screws

(HW80:4 pcs ,R1-R4;HW100:10 p cs ,R1-R10)

2-1 2-2

Inlet hose-

assembly1) 6 Blanking

plugs

Drain hose

bracket User manual

Warranty

card

1

6

8

7

3 5

1 2 4 5 6 73

42

Noise reduc—

tion pads

2x

2x

3-Control panel EN

8

Underwear

Sport

Anti-allergy

Daily Wash

Synthetic

Mix

Baby Care Hygienic

Self Clean

Spin/Drain

Express15 min

Duvet

Delicate

Wool

Temp. SpeedDelay Start/PauseExtra

Rinse

Cotton Cotton+ HW120-B14876

Steam

3

Note : Acoustic signal

In following cases an acoustic signal sounds:

▶when pressing a button

▶when turning the programme selector

▶at the end of programme

▶in case of failures

The acoustic signal can be deselected if necessary ; see DAILY USE.

1 Detergent / Softener Drawer

2 Display

3 Programme selector

4

5 “Start/Pause“ button

6 Steam

7 Extra rinse

8 Speed

9 Temp.

10

Temp. SpeedDela Sy tart/PauseExtra

Rinse

Steam

3-2

11 Child lock

12 Delay

12 11

89

10

7 6 5

2 31

4

Function buttons

3.1 Detergent drawer

1 Compartment : Bleaching agent for cotton/syn-

thetic programme.

2 Compartment : Liquid detergent for programme

3 Compartment : Softener, Conditioning agent etc.

4 Compartment : Powder detergent for programme

Please refer to the information on detergent package

to obtain recommendation for using detergent in vari-

ous washing temperatures.

3.2 Display

If the appliance is on, display will light up the actual sta-

washing time, spin speed, temperature, etc will appear

(Fig. 3-2).

3-1

EN 3-Control panel

9

Programme status indication Programme cycle indication

Display for washing time, end time

delay as well as error codes and

service information.

Remaining opera—

tion time

Remaining delay

time

Rinse cycle

Wash cycle Spin/drainage cycle

Automatic weighing

Steam

Display symbols:

3.3 Program selector

By turning the knob (Fig. 3-3) one of 16 programmes

can be selected, its default settings will be displayed.

Press this button (Fig. 3-4) gently to switch on, the dis-

play is shining. Press it again for about 2 seconds to

—

vated after a while machine will shut down automatically

3.5 “Start/Pause“ button

Touch this button (Fig. 3-5) gently to start or interrupt

the currently displayed programme.

Underwear

Sport

Anti-allergy

Daily Wash

Synthetic

Mix

Baby Care Hygienic

Self Clean

Spin/Drain

Express15 min

Duvet

Delicate

Wool

Cotton Cotton+

3-3

3-4

Start/Pause

3-5

3-Control panel EN

10

3.6 Function buttons

The function buttons (Fig. 3-6) enables additional op-

tions in the selected programme before program start.

The related indicators are displayed.

—

gram, all options are disabled.

If a button has multiple options, the desired option can

be selected by pressing the button sequentially.

To delete the setting or to cancel the setting process,

press the function button until the desired LED lights

Not all functions are available for all programmes (see

PROGRAMMES).

Note: Factory settings

there is no special requirement default settings are recommended.

3.6.1 Function button “Extra Rinse“

Press this button (Fig. 3-6-1) to rinse the laundry more

intense with fresh water. This is recommended for

people with sensitive skin.

By pressing the button several times one to three ad-

ditional cycles (display P1-P3)can be selected.

Different programme has different extra maximum

rinsing times.

3.6.2 Function “Delay”

Press this button (Fig. 3-6-2) to start the program with

a delay. End time delay could be increased in steps of

means end of programme cycle will be in 6 hours and

30 minutes. Touch “Start/Pause” button to activate the

time delay.

The time delay must be longer than the programme run

time. Otherwise the programme will start immediately.

For deactivating the time delay; rotate programme se-

lector.

Note: Liquid detergent

If using liquid detergent, it is not recommended to activate the end time delay.

Temp. SpeedDelay Extra

Rinse

Steam

3-6

Extra

Rinse

3-6-1

Delay

3-6-2

EN 3-Control panel

11

Steam

3.6.3 Function “ “

Press the “ ” button (Fig.3-6-3) can choose dif-

ferent washing time. This function does not apply to

“Delicate”,”Self Clean” and “Spin/Drain” programs.

3.6.4 Function “Steam“

Press this button (Fig.3-6-4), the steam program can

be selected. When this program is selected, the de-

fault temperature is the max temperature of this pro-

gram. You can select if you require this function when

programs “Cotton, Mix, Synthetic, Underwear, Baby Care,

Anti-allergy“ are used .When you select the program

“Steam“ the icon light up to warn you, the icon turns

the program, you can not change the temperature. If

you press the temperature button the program will be

canceled. Switch on the washing machine and select

this program. If the washing machine is working you

cannot select this program.

3.6.5 Function “Speed“

Press this button (Fig. 3-6-5) to change or deselect the

spin of the program If no value is illuminated the laundry

will not spun.

3.6.6 Function “Temp”

Press this button (Fig. 3-6-6) to change the washing

temperature of the programme.

3.6.7 Child lock

This option blocks all panel elements against activation.

After programme start press button “ ” and

”Delay” (Fig. 3-6-7 for 3 seconds simultaneously; child

lock symbol is displayed. For unlocking press again the

two buttons.

Temp.

Speed

3-6-3

3-6-4

3-6-5

3-6-6

Delay

3-6-7

4-Programmes EN

12

Max.

load

in kg

HW100/

HW80

Temperature Preset

Spin

speed

in rpm

Function

Delay

Steam

Extra Rinse

i-time

in °C

Program Fibre typemax Preset

Cotton 10/8 902) 40 •º/•Cotton 1400 ••••

Mix 10/8 60 30 •º/•

Lightly soiled mixed

laundry of cotton and

synthetics.

1000 ••••

Synthetic 10/8 60 40 •º/•Synthetics or mixed

fabric 1200 ••••

Underwear 5/4 60 40 •º/•Cotton/Synthetic 1000 ••••

Baby Care 5/4 902) 40 •º/•Cotton/Synthetic 1000 ••••

Anti -all

ergy

5/4 902) 60 •º/•Cotton/Synthetic 1000 ••••

Daily Wash 5/4 60 30 •º/•Cotton 1000 •/• •

Sport 2.5/2 40 30 •º/•Sports Wear 1000 •/• •

Cotton+ 10/8 902) 30 •º/•Cotton; standard pro—

gram for energy labelling 1000 •/• •

Delicate 1/1 30 30 •º/•Silk 600 •/•/

Duvet 2.5/2 40 40 •º/•Cotton fabrics 800 •/• •

Express

15min3) 1/1 40 * •º/•Cotton/Synthetic 1000 •/• •

Hygienic 5/4 902) 902) •º/•Cotton/Synthetic 1000 •/• •

Wool 1/1 40 * •º/•Wollen fabrics 800 •/• •

Self Clean 0 902) 902) º/ /

/

/— 600 ////

Spin/Drain 10/8 / / / / / All fabrics 1000 ////

1) Relating to dry laundry. *: Water is not heated up.

2) Choose 90 °C wash temperature only for special hygienic requirements.

3) Reduce detergent amount because programme duration is short.

1)

Detergent compartment for:

Bleaching agent

Liquid detergent

Softener, conditioning agent etc.

Powder detergent

•

Yes, º

Optional, / No

EN 5-Consumption

13

Programme

Temper-

ature

in °C

HW100/

HW80

Max. load

in kg

HW100/HW80

Energy

in kWh

HW100/HW80

Water

in L

HW100/HW80

Washing time

in h:min

HW100/HW80

Spin drying

performance

HW100/HW80

Cotton+ *

40°C 5/4 0.50/0.46 46/37 4:08/3:27 B

60°C 5/4 0.56/0.56 46/37 4:12/3:30 B

60°C 10/8 0.50/0.54 59.5/53 4:12/3:30 B

* Standard programme for the Energy Labelling according to 2010/30 EU:

Cotton+ 60°C /40°C with max. spin speed setting

The standard 60°C and 40°C cotton programmes are suitable to clean normally soiled

cycle temperature.

Note: Auto Weight

The appliance is equipped with a loading recognition. At low loading, energy, water and

washing time will be reduced automatically in some programs. The display shows Auto.

6-Daily use EN

14

6.3 Preparing laundry

▶Sort out clothes according to fabric (cotton, syn-

thetics, wool or silk) and to how dirty they are (Fig.

6-3). Pay attention to the care labelling of wash-

ing labels.

▶Separate white clothes from coloured ones.

they fade or run.

▶Empty pockets (keys, coins, etc.) and remove

harder decorative objects (e.g. brooches).

▶

into a wash bag to care for this delicate laundry

(hand or dry cleaning would be better).

▶Close zippers, velco fastener and hooks, make

sure the buttons are sewn on tightly.

▶

hem, delicate underwear (Dessous) and small

items such as socks, belts, bras, etc. in a wash

bag.

▶Unfold large pieces of fabric such as bed sheets,

bedspreads etc.

▶Turn jeans and printed, decorated or color-inten-

sive textiles inside out; possibly wash separately.

6.1 Power supply

Connect the washing machine to a power supply

(220V to 240V~/50Hz; Fig. 6-1). Please refer also to

section Installtion.

6.2 Water connection

▶Before connecting check the cleanliness and clar—

ity of the water inlet.

▶Tun on the tap (Fig.6-2).

Note: Tightness

Before use check for leakage in the joints between the tap and the inlet hose by turning on

the tap.

CAUTION!

Non-textile, as well as small, loose or sharp-edged items may cause malfunctions and

damage of clothes and appliance.

6-3

6-1 6-2

EN 6-Daily use

15

Care chart

Washing

Washable up to 95°C

normal process

Washable up to 60°C

normal process

Washable up to 60°C

mild process

Washable up to 40°C

normal process

Washable up to 40°C

mild process

Washable up to 40°C

very mild process

Washable up to 30°C

normal process

Washable up to 30°C

mild process

Washable up to 30°C

very mild process

Wash by hand

max. 40°C

Do not wash

Bleaching

Any bleaching allowed Only oxygen/

non -chlorine

Do not bleach

Drying

Tumble drying possible

normal temperature

Tumble drying possible

lower temperature

Do not tumble dry

Line drying Flat drying

Ironing

Iron at a maximum

temperature

up to 200 °C

Iron at a medial tem-

perature

up to 150°C

Iron at a low temper—

ature up to 110 °C;

without steam (steam

ironing may cause irre—

versible damage)

Do not iron

Professional Textile Care

Dry cleaning in tetra-

chloroethene

Dry cleaning in hy—

drocarbons

Do not dry clean

Professional wet clean Do not professional

wet clean

6.4 Loading the appliance

▶Put in the laundry piece by piece

▶Don‘t overload. Note the dierent maximum load according to programmes! Rule of

thumb for maximum load: Keep six inches between load and drum top.

▶Close the door carefully. Make sure that no pieces of laundry are pinched.

6-Daily use EN

16

6.5 Selecting detergent

▶

▶Use only machine wash approved detergent.

▶

▶ Mind always detergent manufacturer recommendations.

.

▶Do not use dry cleaning agents such as trichloroethylene and similar products.

Choose the best detergent

Programme

Kind of detergent

Universal Colour Delicate Special Softener

Cotton L/P L/P — — o

Mix L/P L/P — — o

Synthetic L/P L/P L — o

Underwear L/P L/P — — o

Baby Care L/P L/P — — o

Anti-allergy — — — L o

Daily Wash L/P L/P L — o

Sport — — — L o

Cotton+ L/P L/P — — o

Delicate — — L — o

Duvet — — L L o

Express 15 min L/P L/P L — o

Hygienic L/P L/P L — o

Wool — — — L o

Self Clean L/P — — L o

Spin/Drain — — — — o

L = gel-/liquid detergent P = powder detergent O = optional _ = no

If using liquid detergent, it is not recommended to activate the time delay.

We recomment by using:

▶Laundry powder: 20°C to 90°C* (best use:: 40-60°C)

▶Color detergent: 20°C to 60°C (best use: 30-60°C)

▶Wool/delicate detergent: 20°C to 30°C (= best use:)

* Choose 90 °C wash temperature only for special hygienic requirements.

EN 6-Daily use

17

6.7 Switch on the appliance

(Fig. 6-7).

6.6 Adding detergent

1. Slide out the detergent drawer.

2. Put the required chemicals into corresponding

compartments (Fig. 6-6),

3. Push back the drawer gently.

Note:

▶Remove detergent residues before next wash cycle from the detergent drawer.

▶Do not overuse detergent or softener.

▶Please follow the instruction on the detergent package.

▶

▶Concentrated liquid detergent should be diluted before adding.

▶Do not use liquid detergent if function “Delay“ is selected.

▶Carefully choose the programme settings according to the care symbols on all laun-

dry labels and according to the programme table.

6.8 Select a programme

To get the best washing results, select a programme

type.

Turn the programme knob (Fig. 6-8) to select the right

programme. The default settings are displayed.

6.9 Add individual selections

Select required options and settings (Fig. 6-9); refer to

Control Panel.

6-7

Note: Odour removal

amount of detergent in washing agent compartment (2) or special machine cleaner to

remove possibly corruptive residues.

6-6

Temp. SpeedDelay Extra

Rinse

Steam

6-9

Underwear

Sport

Anti-allergy

Daily Wash

Synthetic

Mix

Baby Care Hygienic

Self Clean

Spin/Drain

Express15 min

Duvet

Delicate

Wool

Cotton Cotton+

6-8

6-Daily use EN

18

6.12 After washing

1. At programme cycle end END is displayed.

2.

3. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.

4.

5. Unplug the power cord.

6. Open the door to prevent formation of moisture and odours. Let it open while not used.

6.13 Activate or deactivate the buzzer

The acoustic signal can be deselected if necessary:

1. Switch on the appliance.

2. Select the Spin /Drain programme.

3. Press the “i-time “button and “Speed” button at the same time for about 3 seconds.

“bEEP OFF” will be displayed and the buzzer will be deactivated. For activating the buzzer

press these two buttons at the same time again. “bEEP ON” will be displayed.

6.11 Interrupt — cancel wash programme

To interrupt a running programme press gently “Start/Pause“. Press it again to resume

operation.

To cancel a running programme and all its individual settings:

1. Press “Start/Pause” button to interrupt the running programme.

Press this

2.

3. Run programme “Spin” to drain the water.

4. Select a new programme and start it.

Note: Door lock

▶For safety reasons the door is locked partially during the washing cycle. It is only pos-

sible to open the door at the end of the programme or after the programme was can—

celled correctly (see description above).

▶In case of high water level, high water temperature and during spinning it is not pos-

sible to open the door; Lock is displayed.

Note: Standby mode / energy-saving mode

The switched on appliance will go into standby mode if it will not be activated within 2

minutes before starting the programme or at the end of programme. The display switch-

6.10 Start wash programme

Press “Start/Pause“ button (Fig. 6-10) to start; appli-

ance operates according to present settings. Changes

are only possible by cancelling the programme.

Start/Pause

6-10

button gently to switch on.

EN 7-Eco-friendly washing

19

Environmentally responsible use

▶To achieve best use of energy, water, detergent and time you should use the recom-

mended maximum load size.

▶Do not overload (hand width clearance above laundry).

▶For slightly soiled laundry select the Quick Wash programme.

▶Apply exact dosages of each washing agent.

▶Choose the lowest adequate washing temperature — modern detergents are e—

ciently cleaning below 60°C.

▶Raise default settings only due to heavy staining.

▶Select max. spinning speed if a domestic dryer is used.

8-Care and cleaning EN

20

8.1 Cleaning the detergent drawer

Take always care there are no detergent residues.

Clean the drawer regularly (Fig. 8-1):

1. Pull out the drawer until it stops.

2. Press the release button and remove the drawer.

3. Flush the drawer with water until it is clean and

insert the drawer back in the appliance.

8.2 Cleaning the machine

▶Unplug the machine during cleaning and mainte-

nance.

▶Use a soft cloth with soap liquid to clean the ma-

chine case (Fig. 8-2) and rubber components.

▶Do not use organic chemicals or corrosive sol-

vents.

Note: Hygiene

For regular maintenance, we recommend running the program Self Clean within 100

cycles to avoid possible corrosive residues. Add a small amount of detergent to the de-

tergent compartment (2) — or use a special machine cleaner. If you run more than 100

cycles and do not use the Self Clean program, the Self Clean program light flashes

when the machine is in standby mode. It is recommended to run the Self Clean .

To prevent blockage of water supply by solid substanc-

▶

supply.

▶Unscrew the water inlet hose at the back (Fig.

8-3) of the appliance as well as on the tap.

▶

▶

8.4 Cleaning the drum

▶Remove accidentally washed metal parts such as

pins, coins, etc. from the drum (Fig. 8-5) because

they cause rust stains and damage.

▶Use a non-chloride cleaner for removing rust

stains. Observe the warning hints of the cleaning

agent manufacturer.

▶Do not use any hard objects or steel wool for clean-

ing.

8-1

8-5

8-3 8-4

HW70-BP12758

Wool

R

Under-wear

Sport

Anti-allergy

Daily Wash

Baby Care

Self Clean

Spin/Drain

Express

15 min

Duvet

Cotton

Synthetic

Mix

Cotton+

Delicate

Hygienic

capacity

7kg

°C

60

°C

40

Underwear

Sport

Anti-allergy

Daily Wash

Synthetic

Mix

Baby Care Hygienic

Self Clean

Spin/Drain

Express15 min

Duvet

Delicate

Wool

Temp. SpeedDela Sy tart/PauseExtra

Rinse

Cotton Cotton+ HW120-B14876

Steam

8-2

1

2

EN 8-Care and cleaning

21

1. Turn o and unplug the machine (Fig. 8-8).

2. Open service flap at the right corner of appliance

front (Fig. 8-9).

3. Provide a flat container to catch leach water

(Fig. 8-10). There could be bigger amounts!

4. Pull the drainhose out and hold its end above the

container (Fig. 8-10).

5. Take the sealing plug out of the drainhose (Fig.

8-10).

6. After complete drainage close drainhose and

push it back into the machine (Fig. 8-11).

7. Unscrew and remove counter clockwise the pump

lter (Fig. 8-12).

8. Remove contaminants and dirt (Fig. 8-13).

8.5 Long periods of disuse

If the appliance is left idle for a longer period:

1. Pull out the electrical plug (Fig. 8-6).

2. Turn o water supply (Fig. 8-7).

3. Open the door to prevent formation of moisture

and odours. Let door open while not used.

Before next usage check carefully power cord, water

inlet and drain hose. Make sure everything is properly

installed and without leackage.

WARNING!

Scalding Risk! Water in the pump lter can be very

hot! Before any action please ensure water has

cooled down.

Note: Hygiene

After long periods of disuse we recommended to run programme HYGIENIC with no

load and small amount of detergent in washing agent compartment (2) or special ma-

chine cleaner to remove possibly corruptive residues.

8.6 Pump lter

Clean the lter once a month and check the pump lter

for instanvce if the appliance:

▶doesn´t drain the water.

▶doesn´t spin.

▶cause unusual noise while running.

8-6 8-7

8-10 8-11

8-12 8-13

8-8 8-9

8-Care and cleaning EN

22

CAUTION!

▶Pump lter sealing has to be clean and unhurt. If the lid is not full tightened, water

can escape.

▶The lter must be in place, or it may lead to leakage.

9. Clean carefully pump lter, e.g. using running water

(Fig. 8-14).

10. Rex it thoroughly (Fig. 8-15).

11. Close service flap..

8-14 8-15

EN 9-Troubleshooting

23

of a problem please check all shown possibilities and follow below instructions before you

WARNING!

▶Before maintenance, deactivate the appliance and disconnect the mains plug from

the mains socket.

▶

improper repairs can cause considerable consequential damages.

▶A damaged power cable should only be replaced by the manufacturer, its service

9.1 Information codes

Following codes are displayed only for information referring to the washing cycle. No

measures must be performed.

Code Message

1:25

The remaining wash cycle time will be 1 hour and 25 minutes.

6:30

The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 minutes

.

AUtO

Automatic load detection is working; only in some programs.

End

Lock—

Door is closed because of high water level, high water temperature or spinning cycle

.

bEEP OFF The buzzer is deactivated.

bEEP ON The buzzer is activated.

9.2 Troubleshooting with display code

Problem Cause Solution

E1

• Drainage error, water is not fully drained

within 6 minutes.

•

• Check drain hose installation.

E2

• Lock — error. • Shut the door properly.

E4

• Water level not reached after 12 minutes.

• Drain hose is self-syphoning.

• Make sure that tap is fully opened and water

pressure is normal.

• Check drain hose installation.

E8

• Water protective level — error. • Contact the After sales service.

The function keys is closed.The programme changing is invalid.

9-Troubleshooting EN

24

Problem Cause Solution

F3

Temperature sensor — error. Contact the After sales service.

F4

Heating error.

Contact the After sales service.

F7

Motor — error. Contact the After sales service.

FA

Water level sensor error. Contact the After sales service.

FC0, FC1 or

FC2

Abnormal communication error.

Contact the After sales service.

Unb

Unbalanced load — error. Check a .murd eht ni daol yrdnual ecnalab dn

Reduce the load.

9.3 Troubleshooting without display code

Problem Cause Solution

Washing machine

fails to operate.

Programme is not yet started.

Door is not properly closed.

Machine has not been switched on.

Power failure.

Child lock is activated.

Check programme and start it.

Close the door properly.

Switch the machine on.

Check power supply.

Deactivate child lock.

Washing machine

water.

No water.

Inlet hose is kinked.

Water pressure is less than 0.03

MPa.

Door is not properly closed.

Water supply failure.

Check water tap.

Check inlet hose.

Check water pressure.

Close the door properly.

Ensure the water supply.

Machine is draining Height of drain hose is below 80

cm.

Drain hose end could reach into

water.

Make sure that drain hose is

properly installed.

Make sure the drain hose is not

in water.

Drainage failure. Drain hose is blocked.

Drain hose end is higher than 100

cm above floor level.

Unblock drain hose.

Make sure that drain hose is

properly installed.

Strong vibration

while spinning.

Not all transportation bolts have

been removed.

Appliance has no solid position.

Machine load is not correct.

Remove all transportation

bolts.

Ensure solid ground and a ev-

elled position.

Check load weight and balance.

Operation stops

before completing

wash cycle.

Water or electric failure. Check power and water supply.

Operation stops for

a period of time.

Appliance displays error code.

Problem due to load pattern.

Programme performs soaking cycle

Consider display codes.

Reduce or adjust load.

Cancel programme and restart.

Fb

Machine leakage.

Open drain pump to drain,Shut down the machine.

Contact the After sales service.

EN 9-Troubleshooting

25

Problem Cause Solution

Excessive foam

floats drum and/or

detergent drawer.

• Detergent is not a appropriate.

• Excessive use of detergent.

• Check detergent recommen-

dations.

• Reduce amount of detergent.

Automatic adjust—

ment of washing

time.

• Washing programme duration will

be adjusted.

• This is normal and doesn‘t af-

fect functionality.

Spinning fails. • Unbalance of laundry. • Check machine load and laun-

dry and run a spinning pro-

gramme again.

Unsatisfactory

washing result.

• Degree of pollution does not agree

with selected programme

• Detergent quantitiy was not suf-

cient.

• Maximum load has been excee-

ded.

• Laundry was unevenly distribu-

ted in the drum.

• Select an other programme.

• Choose the detergent acc.

to the degree of pollution

and acc. to manufacturer

specications.

• Reduce loading.

• Loose the laundry.

Washing powder

residues are on the

laundry.

• Insoluble particles of detergent can

remain as white spots on the laun-

dry.

• Perform extra rinse.

• Try to brush the points from the

dry laundry.

• Choose an other detergent.

Laundry has grey

patches.

• Caused by fats such as oils, creams

or ointments.

• Pretreat the laundry with a spe-

cial cleaner.

Note: Foam formation

If too much foam is inspected during spin cycle, motor stops and drain pump will be ac-

tivated for 90 seconds. If that elimination of foam fails up to 3 times, programme ends

without spinning.

Should the error messages reappear even after the taken measures, switch o the appli—

ance, disconnect the power supply and contact the customer service.

9.4 In case of power failure

The current programme and its setting will be saved.

When power supply is restored operation will be re-

sumed.

If a power failure cuts an operating wash programme

door opening is mechanically blocked. To get out any

laundry water level should not be seen in the glassy

porthole of the door. — Danger of burns! Water level

has to be lowered as described in “Pump lter“. Not till

then pull lever (A) beneath service flap (Fig. 9-1) until

door is unlocked by a gentle click. Afterwards rex all

parts.

9-1

10-Installation EN

26

10.1 Preparation

▶Take the appliance out of the packaging.

▶

keep them out of childrens reach. While opening the package, water drops may be

seen on plastic bag and porthole. This normal phenomenon results from water tests

in the factory.

10.3 Dismantle the the transportation bolts

The transport protection on the rear side is designed

for clamping anti-vibration components inside the ap-

pliance during transportation to prevent inner damage.

All elements (I, R, S and T, Fig 10-2) must be removed

before use.

1. Remove all 4 bolts (T1 — T4) (Fig. 10-3)

Note: Packaging disposal

Keep all packaging materials out of children´s reach and dispose them in an environmen-

tally friendly manner.

10.2 OPTIONAL: Install noise reduction pads

1.

3.

10.1

10-2

I1

R5

R6

R7 R9 R10

S2

S1

R8

T1

T4

T3

T2

10-3

1.When opening the shrink package,you will find four

noise reduction pads.These are used for reducing

noise.(Fig. 10.1)

2. Lay the washing machine down to its side, port-

hole pointing upwards, bottom side towards op-

3.

Take out the noise reduction pads and remove the

double-sided adhesive protective film；Paste around

the bottom；The noise reduction pads under the

washing machine cabinet as shown in Figure 3.(two

longer pads in position 1 and 3, two shorter pads in

position 2 and 4). Finally set the machine upright again.

EN 10-Installation

27

10.5 Aligning the appliance

Adjust all feet (Fig. 10-7) to achieve a complete level

position. This will minimize vibrations and thus noise

during use. It will also reduce wear and tear. We recom—

mend to use a spirit level for adjustment. Floor should

be as stable and flat as possible.

1. Loose the locknut (1) by using a wrench.

2. Adjust the high by turning the foot (2).

3. Tighten lock ut (1) against the housing.

10.4 Moving the appliance

If the machine is to be moved to a distant location, replace the transportation bolts removed

before installation to prevent damage: The assembly takes place in reverse order.

Note: Keep in safe place

Keep all parts of the transport protection in a safe place for later use. Whenever the ap-

2. Remove the 10 screws (R1 — R10) from lower back

reinforcement. take out reinforcements (S1 and

S2) from the machine.*HW100-B14876

Remove the 4 screws (R1 — R4) from lower back

reinforcement. take out reinforcements (S2)

from the machine.*HW80-B14876

(Fig. 10-4)

3. Pull out the 2 iron bars I1 and I2 (Fig. 10-5)

S2

R1-R4

S1

R5-R10

I1 I2

10-5

10-6

4. Fill the 6 left holes with blanking plugs (Fig. 10-6)

10-7

10-Installation EN

28

Following connections are possible:

10.6.1 Drain hose to sink

▶Hang the drain hose with the U-support over the

edge of a sink with adequate size (Fig. 10-8).

▶Protect the U-support suciently against slip—

ping.

10.6.2 Drain hose to waste water connection

▶The internal diameter of the stand pipe with

vent-hole must be minimum 40 mm.

▶Put the drain hose for approx. 80 mm in the

wastewater pipe.

▶Attach the U-support and secure it suciently

(Fig. 10-9).

CAUTION!

▶The drain hose should not be submerged in water and should be securely xed and

leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less

than 80 cm, the washing machine will continuously drain while being lled (self-si—

phoning).

▶Drain hose is not to be extended. If necessary contact after sales service.

10.6.3 Drain hose to sink connection

▶The junction must lie above the siphon

▶A spigot connection is usually closed by a pad (A).

That must be removed to prevent any disfunc-

tion (Fig. 10-10).

▶Secure the drain hose with a clamp.

10.6 Drain Water Connection

Fix the water drain hose properly to the piping. The hose has to reach at one point a height

between 80 and 100 cm above the appliance bottom line! If possible keep always drain

hose xed to the clip at the appliance back.

WARNING!

▶Use only the supplied hose set for the connection.

▶Never reuse old hose sets!

▶Only connect to cold water supply.

▶Before connection, check whether the water is clean and clear.

10-8 10-9

10-10

EN 10-Installation

29

10.8 Electrical Connection

Before each connection check if:

▶power supply, socket and fusing are appropriate to

the rating plate.

▶the power socket is earthed and no multi-plug or

extension are used.

▶the power plug and socket are strictly according.

▶Only UK: The UK plug meets BS1363A standard.

Put the plug into the socket (Fig. 10-13).

WARNING!

▶Ensure always that all connections (power supply, drain and fresh water hose) are rm,

dry and leack free!

▶Take care these parts are never to be crushed, kinked, or twisted

▶If the supply cord is damaged, it must be replaced by the service agent (see warranty

card) in order to avoid a hazard. .

10-13

10.7 Fresh Water Connection

Make sure that the gaskets are inserted.

1. Connect the water inlet hose with the angled

end to the appliance (Fig. 10-11). Tighten the

screw joint by hand.

2. The other end connect to a water tap with a

3/4“ thread (Fig. 10-12).

10-12

10-11

11-Technical data EN

30

Suppliers name or trade mark Haier

HW80-B14876 HW100-B14876

Rated capacity (kg) 8 10

A+++ A+++

Energy consumption per year (AEC in kWh/year) 1) 117 118

Energy consumption of standard cotton programme

60°C, full load (kWh/cycle) 0.54 0.50

Energy consumption of standard cotton programme

60°C, partial load (kWh/cycle) 0.56 0.56

Energy consumption of standard cotton programme

40°C, partial load (kWh/cycle) 0.46 0.50

0.42 0.45

Weighted power consumption of the left-on mode (W) 0.52 0.58

Water consumption per year (AWC in L/year) 2) 9500 11400

3) B

Max. spin speed (rpm) 4) 1330

Remaining moisture content (%) 4) 53

Standard 60°C cotton programme 5)

Cotton+ + 60°C + max. spin

Standard 40°C cotton programme 5)

Cotton+ + 40°C + max. spin

Programme time of cotton 60°C full load (min) 235 270

Programme time of cotton 60°C partial load (min) 233 265

Programme time of cotton 40°C partial load (min) 233 260

Duration of the left-on mode (TI in min) 6) 3

Airborne accustical noise (washing/spinning)

in dB(A) re 1pW 7) 53/66 53/65

Type freestanding

1) Based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and

the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is

used.

2) Based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load.

Actual water consumption will depend on how the appliance is used.

3)

4) Based on the standard 60°C cotton programme at full load and the standard 40°C cotton programme at

partial load.

5) “Standard 60°C cotton programme“ and “standard 40°C cotton programme“ are standard washing programmes

—

tion.

6) In case there is a power management system.

7) Based on the standard 60°C cotton programme at full load.

EN 11-Technical data

31

HW80-B14876 HW100-B14876

Dimension (HxDxW in mm) 845x460x595 845x530x595

Dimension (D in mm) 510 600

Voltage in V 220-240 V~/50Hz

Current in A 10

Max power in W 2000

Water pressure in MPa 0.03≤P ≤1

Netto weight in kg 72 77

11.2 Additional technical data

11.3 Standards and Directives

This product meets the requirements of all applicable EC directives with the correspon-

ding harmonised standards, which provide for CE marking.

12-Customer service EN

We recommend our Haier Customer Service and the use of original spare parts.

If you have a problem with your appliance, please rst check section TROUBLESHOOTING.

If you cannot nd a solution there, please contact

▶your local dealer or

▶the Service & Support area at www.haier.com where you can nd telephone numbers

and FAQs and where you can activate the service claim.

To contact our Service, ensure that you have the following data available.

The information can be found on the rating plate.

Model ____________________ Serial No. _____________________

Also check the Warranty Card supplied with the product in case of warranty.

For general business enquiries please nd below our addresses in Europe:

European Haier addresses

Country* Postal address Country* Postal address

Italy

Haier Europe Trading SRL

Via De Cristoforis, 12

21100 Varese

ITALY

France

Haier France SAS

3-5 rue des Graviers

92200 Neuilly sur Seine

FRANCE

Spain

Portugal

Haier Iberia SL

Pg. Garcia Faria, 49-51

08019 Barcelona

SPAIN

Belgium-FR

Belgium-NL

Netherlands

Luxembourg

Haier Benelux SA

Anderlecht

Route de Lennik 451

BELGIUM

Germany

Austria

Haier Deutschland GmbH

Hewlett-Packard-Str. 4

D-61352 Bad Homburg

GERMANY

Poland

Czechia

Hungary

Greece

Romania

Russia

Haier Poland Sp. zo.o.

Al. Jerozolimskie 181B

02-222 Warszawa

POLAND

United

Kingdom

Haier Appliances UK Co.Ltd.

One Crown Square

Church Street East

Woking, Surrey, GU21 6HR

UK

*For more information please refer to www.haier.com

32

EN 12-Customer service

European Haier addresses

Country* Postal address Country* Postal address

Italy

Haier Europe Trading SRL

Via De Cristoforis, 12

21100 Varese

ITALY

France

Haier France SAS

3-5 rue des Graviers

92200 Neuilly sur Seine

FRANCE

Spain

Portugal

Haier Iberia SL

Pg. Garcia Faria, 49-51

08019 Barcelona

SPAIN

Belgium-FR

Belgium-NL

Netherlands

Luxembourg

Haier Benelux SA

Anderlecht

Route de Lennik 451

BELGIUM

Germany

Austria

Haier Deutschland GmbH

Hewlett-Packard-Str. 4

D-61352 Bad Homburg

GERMANY

Poland

Czechia

Hungary

Greece

Romania

Russia

Haier Poland Sp. zo.o.

Al. Jerozolimskie 181B

02-222 Warszawa

POLAND

United

Kingdom

Haier Appliances UK Co.Ltd.

One Crown Square

Church Street East

Woking, Surrey, GU21 6HR

UK

33

34

GB

35

GB

HW80/100-B14876_V02_EN_190130

0020508374AA

• 9-Installation 28 Foll ● owing connections are possible: 9.6.1 Drain hose ● to sink Hang the drain hose with the U-support over the edge of a sink with adequate size (Fig. 9-10). ping. 9.6.2 Drain hose ● to waste water connection The internal diameter of the stand pipe with vent-hole must be minimum 40 mm. Put the drain ● hose for approx. 80 mm in the wastewater pipe. (Fig. 9-11). 9-10 9-11 CAU

• 8-Troubleshooting 22 of a p ● roblem please check all shown possibilities and follow below instructions before you contact an af ● ter sales service. See “Customer service”. WARNING! ● Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. A damaged power cable should only be replaced by the manufacturer, its 8.1 Information codes Following codes are displayed only for information referring to the washing cycle. No measures must be performed. service agent or similarly q

• 1-Safety information 5 WARNING! Daily use Maintenance / cleaning ● Installation Do not remove or insert the plug in the presence of flammable gas. Do not hot wash foam rubber or sponge-like materials. Do not wash any laundry which is polluted with flour. Do not open detergent drawer during any washing cycle. Do not press the door during the washing process,it gets hot. Do n

• 9-Installation 27 9.5 Adjusting the ● feet Install the appliance on solid ground. Adjust all feet (Fig. ● 9-9) to achieve a complete level position. This will minimize vibrations and thus noise during use. It will also reduce wear and tear. We recommend to use a ● spirit level for adjustment. Floor should be as stable at as possible. 9.4 Movin

• 26 9.1 Preparation Take the applian ● ce out of the packaging. 9.3 Dismantle the t ● ransport protection The transport protection on the rear side is designed for clamping anti-vibration components inside the appliance during transportation to prevent inner damage. All elements(I,R,S and ● T,fig.9-4) must be removed be ● fore use: Note: Packaging disposal Keep all packaging materials out of children´s reach and dispose th

• 1-Safety information 6 This appliance is intended for was ● hing machine-washable laun- dry only.Anytime the instru ● ctions given on the label of each garment label should be followed.It is designed exclusively for domestic use inside the house.It is not intended for commercial or industrial use. WARNING! Installation Install or use the appliance only in where the temperatuer is above 5 °C. Do not place the appliance directly on a carpet or close to a wall or furnit

• 8 T oubleshooting 23 8.2 Troubleshooting with display code E1 Check d ● rain hose installation. Heating er ● ror. Water level sensor error. Contact the After sales service. Abnormal communication error. Clean pump filter.
  

• Content 3 1-Safety information 4 2-Product description ● 7 3-Control panel 8 4-Programmes 12 ● 13 5-Daily use 6-Eco-friendly washing 18 7-Care and cleaning 19 8-Troublesho ● oting 22 9-Installation 26 10-Technical data ● 30
  

• 5-Daily use 13 5.3 P ● reparing laundry Sort out clothes according to fabric (cotton, syn- thetics, wool or silk) and how dirty they are (Fig. 5-3). Pay attention to the care labelling of wash- ing labels. ● S ● eparate white clothes from coloured ones. they fade or run. Empty pockets (keys, coins, etc.) and remove harder decorative objects (e.g. brooches). a wash bag to care for this delicate laundry (

• 5-Daily use 16 5.7 Switch on the appliance ● on the appliance (Fig. 5-5). 5.6 Adding detergent Slide out the detergent drawer. Put the required chemicals into corresponding compartments (Fig. 5-4), refer to section 3.1 De- tergent drawer. Push back the drawer gently. Note: Remove detergent residues before next wash cycle from the detergent drawer. Do not overuse detergent or softener. Please follow the instruction on the detergent package. Concentrated liquid detergent should

• 5-Dai y use 14 Care chart Washing Washable up to 95°C normal process Washable up to 60°C normal process Washable up to 60°C mild process normal process Washable up to 40°C mild process Washable up to 40°C very mild process Washable up to 30°C normal process Washable up to 30°C mild process Washable up to 30°C very mild process Wash by hand max. 40°C Do not wash Bleaching Any bleaching all ● owed Only oxygen/ non -chlorine Do not bleach Drying Tumble drying possible normal temperature Tumble drying possible lower temperature Do not t

• 5-Daily use 17 5.12 After washing ● At programme cycle end “End” is displayed. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling. Unplug the power cord. Open the door to p ● revent formation of moisture and odours. Let it open while not used. 5.13 Activate or deactivate the b ● uzzer The acoustic signal can be deselec ● ted if necessary: Switch on the appliance. Select the Spin pr ● ogramme. Press the “I-time” button and “Speed” butto

• 6-Eco-friendly washing 18 Environmental ● ly responsible use To achieve best use of energy, water, detergent and time you should use the recommended maximum load size. Do not overload (hand width clearance above laundry). For slightly soiled laundry select the ● Quick Wash programme. Apply exact dosages of each washing agent. ciently cleaning below