-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
Related Manuals for GE 21880
Summary of Contents for GE 21880
-
Page 1
– 0 –… -
Page 2: Precautions Of Use
Precautions of Use The quality of communication depends on the location and environment of the base and the handset. The 21880 must be kept away from sources of excessive heat (radiators, direct sunlight, etc.) and protected against vibrations and dust. Never allow your telephone to come into contact with water or other liquids or with aerosols.
-
Page 3
! Do not use your telephone to notify a gas leak when you are in the vicinity of the leak. It is recommended that you avoid using this device during electrical storms. ThomsonTelecom hereby declares that the 21880 conforms to the essential requirements and other applicable provisions of European directive 1999/5/CE. WARNING:… -
Page 4: Battery Safety Precautions
Battery Safety Precautions Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. To reduce the risk of fire or personal injury, use only the battery listed in User’s Guide. Keep batteries out of children.
-
Page 5: Installation
Installation Packaging Contents Model: 21880 Solo pack Duo pack* Base stations Handsets Power plugs Telephone line Batteries type AAA, 1.2V, 600mAh Charging station Operating instructions 1+optional 1+optional Please check the contents of the package carefully. If anything is missing or shows signs of transport damage, do NOT put the telephone into service! In such a case, contact either your sales outlet with the purchase receipt.
-
Page 6: Connecting The Charging Station
Only use the connection cable supplied. Phone jack AC power outlet Corded unit rear side view CAUTION: Plug the adapter to the socket outlet that near the equipment and shall be easily accessible. Use only the Thomson Telecom power supply that came with this unit. Using other power supplies may damage the unit.
-
Page 7: Getting Started
AC power outlet Getting Started Install and Charge the Battery Pack Insert two pieces AAA batteries in the compartment, ensuring correct polarity and close the compartment. Place the handset in the remote charge unit to charge for 14 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised.
-
Page 8
If batteries are empty, handset LCD will not has any display and the handset will not response to any key. Handset is then required to put back on Base Station / Charger cradle to charge. Handset cannot be used until handset name and aerial icon appear. If handset does not charged full before use, handset may emit battery low alert tone and battery level indicator shows empty Features… -
Page 9: Menu Structure (Handset)
Up to 10 hours continuous call time Operation with 2 standard AAA batteries (Ni-MH) Adjustable flash time *DECT = Digital Enhanced Cordless Telecommunications Menu Structure (Handset) CALL LOG PHONE BOOK NEW ENTRY ENTER NUMBER ENTER NAME NORMAL RING LIST ENTRY VIP RING 1-10 EDIT ENTRY DELETE…
-
Page 10: Flash Time Setting
LANGUAGE ENGLISH DEUTSCH FRANCAIS CESKY TURKCE POLSKI Λ Λ HNIKA PYCCK ИЙ БЪЛГ И APCK MAGYAR Corded Base Station Set Up TONE/PULSE Dialing A Tone / Pulse switch is located at the base bottom. Default is Tone dialing Flash Time Setting Flash time 600/300/100ms can be selected by a switch located at the base bottom.
-
Page 11: Handset And Base Layouts
Handset and Base Layouts / ▼ Menu / down key CID key / Asterisk key INT / OK INT / OK key Cancel key Mute key – 10 –…
-
Page 12: Handset Lcd Display
Redial / Pause key /Up key / P /▲ External call key. Memory key Flash key Hash key / lock key Handset LCD Display Battery icon Phone icon External call icon Internal call icon CLI icon No ring icon Mute icon Key lock icon Aerial icon ▲…
-
Page 13: Key Description
Key Description Key symbol Usage 1, 2ABC, 3DEF, 4GHI, For digit entry for dialing and memory 5JKL, 6MNO, 7PQRS, 8TUV, 9WXYZ, *, 0,# – 12 –…
-
Page 14: Set Time
VOL/▲ / ▼ Volume control / select AM or PM in Time setting menu Direct memory access For programming phone memory Toggle speakerphone On/Off LNR/PAUSE Last redial number or to enter a pause digit REDIAL ► Retrieve the Redial number list / Browse memory / For selection in MENU Delete a digit in pre-dialing / Delete a record CLEAR…
-
Page 15
Base LED Description There are following LED for corded base. Functions Speakerphone If speakerphone is on, this LED is on. In-Use Light up in conversation. Blink in ringing or after receiving Message Waiting Call in standby mode Base LCD Description This is a two line LCD. -
Page 16: Using The Handset Telephone
It turns on when there is new Caller ID in the standby. It turns on when the Caller ID record is a new record during CID call log list access It turns on when the Caller ID record is a repeated record during CID call log list access CALL It indicates the number of new call in the CID…
-
Page 17: Making Internal Calls
GREEK; RUSSIAN; BULGARIAN; HUNGARIAN Making Internal Calls IMPORTANT: Internal calls can be made only if more than one handset is registered on the base station. Press [INT/ OK] key during standby mode. Press a digit to specify which handset (1~4) to call to. The other handset will ring with the ‘INT’…
-
Page 18: Taking Calls
Taking Calls When an external call is received, all registered handsets and the base station ring. EXT flashes in the handset display and, if subscribed, the telephone number of the caller appears (network depended). If the caller has been stored in your phone book, the name appears. The incoming call VMWI/LED on the base station flashes.
-
Page 19: Call Log Operations
Press key to select the required subscriber from the phone book. Alternatively, enter the first letter of the name required. Press key. The number is dialed. Note: How to store entries in the phone book is explained in the Chapter “Phone Book”. Call Log Operations IMPORTANT: To use the “Call Log”…
-
Page 20: Muting The Microphone
Store: Press key, then press “INT/OK” key to start the NAME entry by keypad. Press “INT/OK” key to confirm. Select the ring tone with key. Press “INT/OK” key when finish. Note: 1. The CALL LOG icon and display indicator disappear only after browsing through all the entries.
-
Page 21: Holding Calls / Forwarding Calls
Holding Calls / Forwarding Calls If the telephone is connected to a PABX system, it is possible to put calls on hold and call other extension lines or to forward calls. Press “R” key to put the call on hold and dial the extension number (e.g.
-
Page 22: Paging The Handset
Paging the Handset If a handset has been misplaced, it is possible to call all the handsets. Pressing the page key or any key in the handset can stop the page tone. Entering a Dialling Pause (P) If the telephone is connected to a PABX system, it may be necessary to insert a dialing pause.
-
Page 23: List Entries / Edit Entries / Delete Entries
If a VIP ring is assigned for that entry, a digit ‘#’ will be shown in front of the name during the incoming call or browsing “MEM FULL” appear stand for memory full. Or Store the number from the Pre-dialling mode To store a phone number from the Pre-dialing mode (when a phone number is entered during Standby mode before pressing the TALK key) to the phonebook, first press […
-
Page 24: Changing The Ringer Melody (External / Internal)
Press key to select the required volume (from 0 to 5 levels). Press “INT/OK” key. Note: The ringer volume can be heard at different volumes. If the ringer symbol appears as non dotted line, the ringer volume will be switched to OFF. Changing the Ringer Melody (external / internal) Press…
-
Page 25: Saving A Prefix
Saving a Prefix It is possible to save prefix numbers in the handset. This number is then recalled after pressing and hold “0” key for two seconds. Press key as often as necessary until the HANDSET menu appears. Press “INT/OK” key. Press key to select the submenu ‘Prefix mem’…
-
Page 26: Default Settings
Default Settings If selected, the handset settings which you have changed are returned to their default values. The phone book entries are retained. Press key until the HANDSET menu appears. Press “INT/OK” key. Press key to select the submenu ‘Default’ and press “INT/OK”…
-
Page 27: Changing The Pin (Personal Identification Number)
key is pressed and hold for more than 4 seconds. After selecting “REGISTER”, the handset starts searching for a base station which is available for registration. The “Aerial” icon starts flashing. If a base is found, user will be asked to enter the personal identification number PIN for that base.
-
Page 28
Enter old PIN (0000) and press “INT/OK” key. Enter new PIN (e.g. 1111) and press “INT/OK” key. Enter new PIN again (e.g. 1111) and press “INT/OK” key to confirm.. Note: maximum of 8 digits can be entered. Default Settings Press key until the BASE menu appears and press “INT/OK”… -
Page 29
Making External Call Normal Dialing Pick up the corded handset and dial the telephone number. Place the corded handset on the hook to terminate the call. Pre-dialing Dial the telephone number (using CLEAR for correction). Pick up the corded handset or press key to seize the line. -
Page 30
Redial Memory Access Press REDIAL key to access the redial memory. Note: If there is no record in the memory, [EMPTY] will display. Press ◄CID or REDIAL► key to view latest/earlier record. Or press EXIT key to exit. Or press CLEAR key to delete the record. Or press and hold CLEAR key 2 seconds to delete all records. -
Page 31
Reviewing the Redial memory/ Indirect memory/ CID memory when NUMBER is displayed Press MEM key, LCD show “ENTER NAME”. Enter Name characters.(max. 10) — delete entry by pressing CLEAR key Press SELECT 2 times to confirm Or press EXIT key to exit. Key assignment overview Character Space 1… -
Page 32
Or press and hold CLEAR key 2 seconds to delete Memory l to 10 (not apply to M1 memory). “ERASE ALL” is shown. Press CLEAR or SELECT key again to confirm List Entry/ Edit Entry/ Delete Entry Press MENU key, press ◄ or ► until PHONE BOOK appears. Then press [SELECT] key. -
Page 33
Press CID key . Note: If there is no record in the memory, “NO CALL” will display. Press ◄ or ► key to view latest/earlier record. NEW icon ON indicate the record is a new NEW icon Off indicate the record is a old Or press EXIT key to exit Or press CLEAR key to delete the record. -
Page 34
Teleconference (Cored base station to Handset) After have received an external call, it is possible to include a cordless handset in the conversation (three way conference). press “PAGE” key and press [1 or 2 or 3 or 4], the handset number you want to call. -
Page 35: Changing The Ringer Melody
Note: If corded base station does not answer, press “INT” key again can stop paging Base station MENU Barring Calls The following options are available for selection for barring calls: Option Description DISABLE All telephone calls are possible. EXTERNAL All external calls are barred. NUMBER Phone number starting with that number will be barred, e.g.
-
Page 36: Set Date Format
If Time format is 12 hour format, AM/PM icon can be selected by pressing key. Press SELECT key when finish. . Set DATE FORMAT Press MENU key, press ◄ or ► key until SETTINGS appears. Then press SELECT key. Press ◄ or ► key to select the submenu DATE FORMAT and press SELECT key.
-
Page 37: Technical Specifications
Press EXIT to exit. Note: The following languages are available ENGLISH; GERMAN; FRENCH; CZECH; TURKISH; POLISH; GREEK; RUSSIAN; BULGARIAN; HUNGARIAN Technical Specifications Handset Operating Time: Approx. 10 hours talk time (average values*) Approx. 100 hours standby AC / DC Adapter: (for VD080040D Base) Input: 230V AC / 50 Hz…
-
Page 38: General Product Care
General Product Care Simply wipe the base station with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge. Troubleshooting Guide When you forget base PIN, following the procedure to Reset the units. ALL MEMORY AND SETTING WILL BE LOST.
-
Page 39
No display. The battery has not Charge the battery or been charged. replace them (see Battery Charging) No reactions to The keypad is locked. Press * key longer keystroke. than 2 seconds. The handset is outside No radio connection the base station range. Move closer to the to the base station: base station. -
Page 40
Environment Used equipment and used handset batteries must be disposed of in compliance with current environmental protection regulations. You should return them to your reseller or dispose of them at an approved recycling centre. Do not attempt to open the batteries, as they contain chemical substance.
-
#1
Телефон Thomson Telecom RU21806GE2-A не работает база.
При подключении блока питания 1 раз моргает светодиод , больше ничего не происходит . На кнопку поиска трубки не реагирует . Что там нужно посмотреть ?
-
#2
Вообщем сделал его , перепаял кварц на базе и он заработал.
-
#3
Доброго времени суток.
Есть у когонибудь инструкция на телефон.Как привязать трубку к базе?
Проблема в том что трубка не подключается к базе.При нажатии на любые кнопки трубка издает двойные сигналы и все.При Нажатии кнопки поиск база издает однократный сигнал.Если нажать и держать кнопку на базе то через 10 сек база начинает издавать сигнал на протяжении минуты.Что может быть?
-
#4
вроде включить в розетку с нажатой клавишей поиска трубки и удерживать около 5сек.
-
#5
вроде включить в розетку с нажатой клавишей поиска трубки и удерживать около 5сек.
насколько мне кажется — это сброс базы на заводские установки……………..
-
#6
У меня была похожая ситуация, база не видела трубку.
Решилось все просто: поставила трубку на базу, отключила от питания, нажала и удерживала кнопку и включила питание, когда появились короткие сигналы отпустила кнопку.И заново зарегистрировала трубку.
На базе press the “PAGE” key for 5 seconds. (должны появится короткие сигналы)
На трубке:
1. Press the “PROG/REDIAL” button, the Red LED will be blinking.
2. Press the [1] and [0] button and press the “TALK/OK” button to confirm.
3. Enter the base station PIN (the default is 0000).
4. Press the “TALK/OK” button again to confirm the selection.
If the handset finds the base, a confirmation beep indicates that the registration is successful.
комплект из базы и трубки;стандарт DECT
Купить
Обзор:
Радиотелефон Panasonic KX TG1611 RUH
Скачать схему и инструкцию для радиотелефона General Electric RU21806GE3-A. Описание Радиотелефоны DECT General Electric General Electric RU28512 ЕE1 (Black) Радиотелефон. Инструкция 1 шт.
Радиотелефоны General Electric, телефоны DECT. радиотелефон General Electric 27850 с АОН, радиотелефон General Инструкции. оргтехника. Радиотелефон General Electric ES 26929 GE. Бесплатная доставка, без предоплаты.
Радиотелефоны General Electric, телефоны DECT. Телефоны DECT I LG I GE I Panasonic I сортировать по цене. страницы: 1 2 3 General Electric 21830, радиотелефон General Electric 21880 Инструкции. оргтехника.
General Electric OLX.bg. Чрез натискане на бутона за Регистрация приемам Общите условия за използване на платформата.
GENERAL ELECTRIC — История Компании
cthutq62
23.04.2009, 08:45
Принесли друзья ртелефон Thomson Telecom RU21816GE2, нет регистрации трубки.Объеснили -вовремя разговора села -отключилась трубка, поставили на зарядку, после зарядки нет регестрации база-трубки. На форуме нашол сылку на прошивку-базы ,нескачиветься?
Подскажите кто знает, очень нужна прошивка-базы.
Зачем в базу то лезть если труба села :confused: Подзаряди аккумуляторы нормально , авось и так свяжется
cthutq62
23.04.2009, 20:19
ртелефон Thomson Telecom RU21816GE2, нет регистрации трубки. Зарежал трубку 15-часов,никаково результата. делал всё по инструкции.
А перед этим базу пивом не залили случайно? Недавно было подобное принесли нет связи, при выдаче говорю кто базу залил водой, а в ответ я забыла извените. И если чесно база летит очень редко. Вот бп бывает чаще
Сделай сброс трубки через меню по инструкции и попробуй зарегистрировать. Если не получится, включи питание базы удерживая нажатой кнопку до бипа, после этого снова попробуй зарегистрировать.
Сначала надо сбросить PIN код базы. Выкл. Нажать кнопку базы. Вкл. Держать пока не пикнеть и зарегистировать трубку.Код обычно 0000
cthutq62
24.04.2009, 08:17
Всем большое -агромное спасибо! Кто откликнулся.
Сброс базы на пин-код 0000 помог. В инструкции про этот сброс нет описания. Тема закрыта.
Сделай сброс трубки через меню по инструкции и попробуй зарегистрировать. Если не получится, включи питание базы удерживая нажатой кнопку до бипа, после этого снова попробуй зарегистрировать.
инструкции нет, опишите как провести регистрацию?
нашел как сделать регистрацию
Регистрация:
— на базе Page 5 сек.
— на трубке P10 — OK — PIN базы (0000) — OK — после индикации свободных номеров трубок ввести желаемый номер 1-4.
а как перевести с пульса в тон?
Помоги плиз с инструкцией на ge27850ge4-b запарился гуглить — везде денег просят
Здравствуйте !
Помогите с RU21816GE2. Досталась случайно. Аккумулятор дохлый, сунул 5в, батарея показывает 2/3 заряда (мало чтоль 5в?) , мигает конвертик,горит перечёркнутый динамик, номер набирает и отвечает. На клавиши меню реагирует только бипером,ничего не меняется…Я так думаю должны часы как то индицироваться, но их нет. Показывает кратковременно время вызова, потом и оно сбрасывается само. КАК погасить энтот конвертик ??? И как включить меню??? Или прошивка подсъехала? Кто то до меня коврял его и аккумулятор изначально переполюсован был……
После переполюсовки нужно отдавать в ремонт. Тем кто сует в трубу 5 В я бы клаву не доверил чистить.
После переполюсовки нужно отдавать в ремонт. Тем кто сует в трубу 5 В я бы клаву не доверил чистить.
Несколько конечно категорично….Был бы ремонт, вопросов бы глупых не задавал. 5в из соображений 3-х элементов в аккумуляторе (3х1.5=4.5).Понятно что номинал 1.2, но при макс заряде может и 1.5….Я просил помощи, а не доверия чистить клаву……
Поневоле станешь категоричным, если каждое ковыряние дилетантов — это гарантированно от получаса до нескольких часов неоплачиваемой работы.
Не бывает на нормальных аккумуляторах 1,5 В.
4,5 — 5 какая разница, да? Трудно аккумуляторы подключить, а не левый блок питания, не зная предельно допустимого напряжения?
Почти все ответы на вопросы есть в инструкции. RTFM.
Согласен. Не учёл некоторой особенности форумчан. Я интересуюсь не с целью коммерческого ремонта, а для себя. Нахожусь в маленьком городе, поэтому ограничен в доступе радиодеталей, даже вот таких казалось бы простых аккумуляторов. Сунул не левый блок питания а стабильных 5в. Не думаю что это слишком много для трубы, но и не утверждаю…. В инструкции прописано как что делать, это ясно. Но трубка не откликается на некоторые команды, поэтому и поросил совета и помощи.Может я и дилетант в плане ремонта таких трубок,даже можно сказать неуч, но немного разбираюсь в радиосвязи. И вопросы,по моему, были вполне корректны. А вот ответов я так и не услышал, кроме того что после переполюсовки надо в ремонт всё нести….Это и не дилетанту ясно. Интересно самому. Я с другого форума сюда заглянул, видимо поэтому и оказался непонят.
Бытует анекдот.
Привезли на завод резьбонарезной станочек(импортный)= режет резьбу от М1 до М6. Проверили- отлично. Но нашим интересно а как М8-режет, а М10-туже но режет, а М12 со скрипом, а М14- сломался. Вывод-хреновый станок.
Вот так и ваши 5 вольт
Хорошо,согласен,подзатупил не знаючи. НО на вопросы то ответте корректно !!!!!
Значит так, по порядку.
1. Обычное испытательное напряжение питания в трубах с 3 элементами аккумуляторов — 4В. Примерно до 4,5В — напряжение штатное, выше не штатное но допустимое примерно до 5В. У GE по питанию обычно стоит защитный стабилитрон на 5,6 и предохранитель. В этой модели стабилитрона нет, только предохранитель, но по цепи заряда ограничение на уровне 5В. Поэтому не надо насиловать трубу заштатным питанием если в этом нет никакой необходимости. По этой же причине БП как раз левый, т.к. он не пригоден для этой работы, пусть он хоть какой стабилизированный и супер пупер фирменный.
2. Совет отдать в ремонт после переполюсовки вызван как раз тем, что предохранители в таких случаях если и не сгорают полностью, но могут подгореть увеличивая сопротивление, что вызывает разные глюки. Поэтому пусть и не ремонт, но проверка предохранителя и тока потребления нужна, особенно если есть какие-то непонятные проблемы.
3. «батарея показывает 2/3 заряда (мало чтоль 5в?)». А при чем тут заряд и 5в? Индикатор степени заряда — это не вольтметр, % заряда никакими приборами не измеришь, его можно только косвенно вычислить, зная время и ток заряда/потребления.
4. «мигает конвертик,горит перечёркнутый динамик… КАК погасить энтот конвертик ???». В инструкции все написано что это такое и как включить-выключить. Инструкция приаттачена выше. В чем вопрос? Мигающий конверт — наличие непросмотренных входящих номеров. Перечеркнутый колокольчик — отключен звонок. Перечеркнутый динамик он отображать вообще не умеет — см. список пиктограмм.
5. «Я так думаю должны часы как то индицироваться, но их нет.» А может почитать инструкцию, должны они индицироваться или нет если их не запрограммировали? И заодно почитать как программировать.
6. «На клавиши меню реагирует только бипером,ничего не меняется… как включить меню???» «трубка не откликается на некоторые команды… вот ответов я так и не услышал». А какой может быть ответ при таком вопросе, откуда мы знаем что ты нажимал и в какой последовательности, что за клавиши меню и команды? В инструкции все написано. Программирование начинается с нажатия Prog.
На что я еще забыл ответить?
Доброго времени суток всем, подскажите пожалуйста, телефон GE RU21858E4-A, как включить АОН и автоответчик, в меню есть функция автоответчика (отображает вкл/выкл) но он не включается, а функции АОНа вообще нету в меню. Заранее всем благодарен!!!
P.S. инструкция на англицком, я ее не понимать)))
vasiliy200277
18.01.2012, 20:42
Спасибо помогло!!!!!!
vasiliy200277
18.01.2012, 20:47
Сменил номер телефона и АОН перестал работать! Позвонил на станцию оказывается станция новая и работает по евро стандарту обьяснили что АОН это уже старьё сказали что теперь только Caller ID. Вот из за этого у меня не работает АОН.
Сменил номер телефона и АОН перестал работать! Позвонил на станцию оказывается станция новая и работает по евро стандарту обьяснили что АОН это уже старьё сказали что теперь только Caller ID. Вот из за этого у меня не работает АОН.
и к чему это написано?
какое отношение Ваш телефон и Аон имеет к этой теме?
Тем более глупость написана……..
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
21870
Digital Cordless Telephone
With Dual Mode Caller ID
User’s Guide
is a trademark of General Electric company and is under license by
Thomson Telecom, France.
Model: CE21870GEX-A
0007289 (Rev. 0
E)
06-38
Printed in China
Thomson Telecom
46, Quai Alphonse le Gallo,
92648 Boulogne Cedex
, France
Related Manuals for THOMSON GE 21870
Summary of Contents for THOMSON GE 21870
-
Page 1
With Dual Mode Caller ID User’s Guide Thomson Telecom 46, Quai Alphonse le Gallo, 92648 Boulogne Cedex , France is a trademark of General Electric company and is under license by Thomson Telecom, France. Model: CE21870GEX-A 0007289 (Rev. 0 06-38 Printed in China… -
Page 2: Precautions Of Use
It is recommended that you avoid using this device during electrical storms. Thomson Telecom hereby declares that the 21870 conforms to the essential requirements and other applicable provisions of European directive 1999/5/CE. IMPORTANT: Because cordless phones operate on electricity, you should have one phone in your home that isn’t cordless, in case the…
-
Page 3: Battery Safety Precautions
AC power outlet Phone jack CAUTION: Plug the adaptor to the socket outlet that near the equipment and shall be easily accessible. Use only the Thomson Telecom power supply that came with this unit. Using other power supplies may damage the unit.
-
Page 4
Getting Started Install and Charge the Battery Pack Insert two pieces AAA batteries in the compartment, ensuring correct polarity and close the compartment. Place the handset in the base station to charge for 14 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised. -
Page 5: Menu Structure (Handset)
Menu Structure (Handset) CALL LOG PHONE BOOK NEW ENTRY ENTER NUMBER ENTER NAME NORMAL RING LIST ENTRY VIP RING 1-10 EDIT ENTRY DELETE DELETE ALL CONFIRM? VOLUME [- — — — — ] HANDSET RINGER EXT RING MELODY 1-10 INT RING MELODY 1-10 HS NAME PREFIX MEM…
-
Page 6: Handset And Base Layouts
Handset and Base Layouts Menu / down key CID / Asterisk key INT / OK key Cancel key Mute key Redial / Pause /Up key External call key. Memory key Flash key Hash / lock key Page Paging key LED: Steady: when handset is connected to a call in the In Use / base station…
-
Page 7: Lcd Display
LCD Display Battery icon Phone icon External call icon Internal call icon CLI icon No ring icon Mute icon Key lock icon Aerial icon ▲ / ▼ Up / Down arrow Voice mail waiting indicator (VMWI icon) Using the Handset Telephone Using the telephone When the handset is inserted in the station charging unit, it starts to charge automatically.
-
Page 8: Call Log Operations
Press key to carry out the conversation. Press key to end the call. Taking Calls When an external call is received, all registered handsets and the base station ring. ‘EXT’ flashes in the handset display and, if subscribed, the telephone number of the caller appears (network depended). If the caller has been stored in your phone book, the name appears.
-
Page 9
Edit Call Log memory When browsing Call Log memory, Caller Line Identification (CLI) number can be edited before dial back. Amended CLI number will not overwrite the stored Call Log memory. Press “0-9” to add digits in front of CLI number. Press to remove entry or leftmost digit. -
Page 10: Handset Settings
tone. Entering a Dialling Pause (P) If the telephone is connected to a PABX system, it may be necessary to insert a dialing pause. To do this, press key after entering the relevant digit in the pre-dial buffer, e.g. 0, for an external line (0P….). A “P”…
-
Page 11
Changing the Ringer Melody (external / internal) Press key until the HANDSET menu appears. Press key twice. key to select the required submenu (EXT RING or INT RING) and press key. to select the required melody (1-10). Press key to confirm. Entering/Changing Handset Name It is possible to assign a name to each handset. -
Page 12
Key assignment Overview SPACE, 1 P, Q, R, S, 7 A, B, C, 2 T, U, V, 8 D, E, F, 3 W, X, Y, Z, 9 G, H, I, 4 +, -, 0 J, K, L, 5 [, ], * M, N, O, 6 ?, :, # Registering Additional Handsets… -
Page 13: Technical Specifications
Changing the Dialing Mode Press key until the BASE menu appears and press key. Press key to select the submenu DIAL MODE and press key. Press key to select the required dialing mode and press key. Changing the PIN Press key until the BASE menu appears and press key.
-
Page 14: General Product Care
General Product Care Simply wipe the base station with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge. Troubleshooting Guide When you forget base PIN, following the procedure to reset the units. ALL MEMORY AND SETTING WILL BE LOST.
-
Page 1
– 0 –… -
Page 2: Precautions Of Use
Precautions of Use The quality of communication depends on the location and environment of the base and the handset. The 21880 must be kept away from sources of excessive heat (radiators, direct sunlight, etc.) and protected against vibrations and dust. Never allow your telephone to come into contact with water or other liquids or with aerosols.
-
Page 3
! Do not use your telephone to notify a gas leak when you are in the vicinity of the leak. It is recommended that you avoid using this device during electrical storms. ThomsonTelecom hereby declares that the 21880 conforms to the essential requirements and other applicable provisions of European directive 1999/5/CE. WARNING:… -
Page 4: Battery Safety Precautions
Battery Safety Precautions Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. To reduce the risk of fire or personal injury, use only the battery listed in User’s Guide. Keep batteries out of children.
-
Page 5: Installation
Installation Packaging Contents Model: 21880 Solo pack Duo pack* Base stations Handsets Power plugs Telephone line Batteries type AAA, 1.2V, 600mAh Charging station Operating instructions 1+optional 1+optional Please check the contents of the package carefully. If anything is missing or shows signs of transport damage, do NOT put the telephone into service! In such a case, contact either your sales outlet with the purchase receipt.
-
Page 6: Connecting The Charging Station
Only use the connection cable supplied. Phone jack AC power outlet Corded unit rear side view CAUTION: Plug the adapter to the socket outlet that near the equipment and shall be easily accessible. Use only the Thomson Telecom power supply that came with this unit. Using other power supplies may damage the unit.
-
Page 7: Getting Started
AC power outlet Getting Started Install and Charge the Battery Pack Insert two pieces AAA batteries in the compartment, ensuring correct polarity and close the compartment. Place the handset in the remote charge unit to charge for 14 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised.
-
Page 8
If batteries are empty, handset LCD will not has any display and the handset will not response to any key. Handset is then required to put back on Base Station / Charger cradle to charge. Handset cannot be used until handset name and aerial icon appear. If handset does not charged full before use, handset may emit battery low alert tone and battery level indicator shows empty Features… -
Page 9: Menu Structure (Handset)
Up to 10 hours continuous call time Operation with 2 standard AAA batteries (Ni-MH) Adjustable flash time *DECT = Digital Enhanced Cordless Telecommunications Menu Structure (Handset) CALL LOG PHONE BOOK NEW ENTRY ENTER NUMBER ENTER NAME NORMAL RING LIST ENTRY VIP RING 1-10 EDIT ENTRY DELETE…
-
Page 10: Flash Time Setting
LANGUAGE ENGLISH DEUTSCH FRANCAIS CESKY TURKCE POLSKI Λ Λ HNIKA PYCCK ИЙ БЪЛГ И APCK MAGYAR Corded Base Station Set Up TONE/PULSE Dialing A Tone / Pulse switch is located at the base bottom. Default is Tone dialing Flash Time Setting Flash time 600/300/100ms can be selected by a switch located at the base bottom.
-
Page 11: Handset And Base Layouts
Handset and Base Layouts / ▼ Menu / down key CID key / Asterisk key INT / OK INT / OK key Cancel key Mute key – 10 –…
-
Page 12: Handset Lcd Display
Redial / Pause key /Up key / P /▲ External call key. Memory key Flash key Hash key / lock key Handset LCD Display Battery icon Phone icon External call icon Internal call icon CLI icon No ring icon Mute icon Key lock icon Aerial icon ▲…
-
Page 13: Key Description
Key Description Key symbol Usage 1, 2ABC, 3DEF, 4GHI, For digit entry for dialing and memory 5JKL, 6MNO, 7PQRS, 8TUV, 9WXYZ, *, 0,# – 12 –…
-
Page 14: Set Time
VOL/▲ / ▼ Volume control / select AM or PM in Time setting menu Direct memory access For programming phone memory Toggle speakerphone On/Off LNR/PAUSE Last redial number or to enter a pause digit REDIAL ► Retrieve the Redial number list / Browse memory / For selection in MENU Delete a digit in pre-dialing / Delete a record CLEAR…
-
Page 15
Base LED Description There are following LED for corded base. Functions Speakerphone If speakerphone is on, this LED is on. In-Use Light up in conversation. Blink in ringing or after receiving Message Waiting Call in standby mode Base LCD Description This is a two line LCD. -
Page 16: Using The Handset Telephone
It turns on when there is new Caller ID in the standby. It turns on when the Caller ID record is a new record during CID call log list access It turns on when the Caller ID record is a repeated record during CID call log list access CALL It indicates the number of new call in the CID…
-
Page 17: Making Internal Calls
GREEK; RUSSIAN; BULGARIAN; HUNGARIAN Making Internal Calls IMPORTANT: Internal calls can be made only if more than one handset is registered on the base station. Press [INT/ OK] key during standby mode. Press a digit to specify which handset (1~4) to call to. The other handset will ring with the ‘INT’…
-
Page 18: Taking Calls
Taking Calls When an external call is received, all registered handsets and the base station ring. EXT flashes in the handset display and, if subscribed, the telephone number of the caller appears (network depended). If the caller has been stored in your phone book, the name appears. The incoming call VMWI/LED on the base station flashes.
-
Page 19: Call Log Operations
Press key to select the required subscriber from the phone book. Alternatively, enter the first letter of the name required. Press key. The number is dialed. Note: How to store entries in the phone book is explained in the Chapter “Phone Book”. Call Log Operations IMPORTANT: To use the “Call Log”…
-
Page 20: Muting The Microphone
Store: Press key, then press “INT/OK” key to start the NAME entry by keypad. Press “INT/OK” key to confirm. Select the ring tone with key. Press “INT/OK” key when finish. Note: 1. The CALL LOG icon and display indicator disappear only after browsing through all the entries.
-
Page 21: Holding Calls / Forwarding Calls
Holding Calls / Forwarding Calls If the telephone is connected to a PABX system, it is possible to put calls on hold and call other extension lines or to forward calls. Press “R” key to put the call on hold and dial the extension number (e.g.
-
Page 22: Paging The Handset
Paging the Handset If a handset has been misplaced, it is possible to call all the handsets. Pressing the page key or any key in the handset can stop the page tone. Entering a Dialling Pause (P) If the telephone is connected to a PABX system, it may be necessary to insert a dialing pause.
-
Page 23: List Entries / Edit Entries / Delete Entries
If a VIP ring is assigned for that entry, a digit ‘#’ will be shown in front of the name during the incoming call or browsing “MEM FULL” appear stand for memory full. Or Store the number from the Pre-dialling mode To store a phone number from the Pre-dialing mode (when a phone number is entered during Standby mode before pressing the TALK key) to the phonebook, first press […
-
Page 24: Changing The Ringer Melody (External / Internal)
Press key to select the required volume (from 0 to 5 levels). Press “INT/OK” key. Note: The ringer volume can be heard at different volumes. If the ringer symbol appears as non dotted line, the ringer volume will be switched to OFF. Changing the Ringer Melody (external / internal) Press…
-
Page 25: Saving A Prefix
Saving a Prefix It is possible to save prefix numbers in the handset. This number is then recalled after pressing and hold “0” key for two seconds. Press key as often as necessary until the HANDSET menu appears. Press “INT/OK” key. Press key to select the submenu ‘Prefix mem’…
-
Page 26: Default Settings
Default Settings If selected, the handset settings which you have changed are returned to their default values. The phone book entries are retained. Press key until the HANDSET menu appears. Press “INT/OK” key. Press key to select the submenu ‘Default’ and press “INT/OK”…
-
Page 27: Changing The Pin (Personal Identification Number)
key is pressed and hold for more than 4 seconds. After selecting “REGISTER”, the handset starts searching for a base station which is available for registration. The “Aerial” icon starts flashing. If a base is found, user will be asked to enter the personal identification number PIN for that base.
-
Page 28
Enter old PIN (0000) and press “INT/OK” key. Enter new PIN (e.g. 1111) and press “INT/OK” key. Enter new PIN again (e.g. 1111) and press “INT/OK” key to confirm.. Note: maximum of 8 digits can be entered. Default Settings Press key until the BASE menu appears and press “INT/OK”… -
Page 29
Making External Call Normal Dialing Pick up the corded handset and dial the telephone number. Place the corded handset on the hook to terminate the call. Pre-dialing Dial the telephone number (using CLEAR for correction). Pick up the corded handset or press key to seize the line. -
Page 30
Redial Memory Access Press REDIAL key to access the redial memory. Note: If there is no record in the memory, [EMPTY] will display. Press ◄CID or REDIAL► key to view latest/earlier record. Or press EXIT key to exit. Or press CLEAR key to delete the record. Or press and hold CLEAR key 2 seconds to delete all records. -
Page 31
Reviewing the Redial memory/ Indirect memory/ CID memory when NUMBER is displayed Press MEM key, LCD show “ENTER NAME”. Enter Name characters.(max. 10) — delete entry by pressing CLEAR key Press SELECT 2 times to confirm Or press EXIT key to exit. Key assignment overview Character Space 1… -
Page 32
Or press and hold CLEAR key 2 seconds to delete Memory l to 10 (not apply to M1 memory). “ERASE ALL” is shown. Press CLEAR or SELECT key again to confirm List Entry/ Edit Entry/ Delete Entry Press MENU key, press ◄ or ► until PHONE BOOK appears. Then press [SELECT] key. -
Page 33
Press CID key . Note: If there is no record in the memory, “NO CALL” will display. Press ◄ or ► key to view latest/earlier record. NEW icon ON indicate the record is a new NEW icon Off indicate the record is a old Or press EXIT key to exit Or press CLEAR key to delete the record. -
Page 34
Teleconference (Cored base station to Handset) After have received an external call, it is possible to include a cordless handset in the conversation (three way conference). press “PAGE” key and press [1 or 2 or 3 or 4], the handset number you want to call. -
Page 35: Changing The Ringer Melody
Note: If corded base station does not answer, press “INT” key again can stop paging Base station MENU Barring Calls The following options are available for selection for barring calls: Option Description DISABLE All telephone calls are possible. EXTERNAL All external calls are barred. NUMBER Phone number starting with that number will be barred, e.g.
-
Page 36: Set Date Format
If Time format is 12 hour format, AM/PM icon can be selected by pressing key. Press SELECT key when finish. . Set DATE FORMAT Press MENU key, press ◄ or ► key until SETTINGS appears. Then press SELECT key. Press ◄ or ► key to select the submenu DATE FORMAT and press SELECT key.
-
Page 37: Technical Specifications
Press EXIT to exit. Note: The following languages are available ENGLISH; GERMAN; FRENCH; CZECH; TURKISH; POLISH; GREEK; RUSSIAN; BULGARIAN; HUNGARIAN Technical Specifications Handset Operating Time: Approx. 10 hours talk time (average values*) Approx. 100 hours standby AC / DC Adapter: (for VD080040D Base) Input: 230V AC / 50 Hz…
-
Page 38: General Product Care
General Product Care Simply wipe the base station with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge. Troubleshooting Guide When you forget base PIN, following the procedure to Reset the units. ALL MEMORY AND SETTING WILL BE LOST.
-
Page 39
No display. The battery has not Charge the battery or been charged. replace them (see Battery Charging) No reactions to The keypad is locked. Press * key longer keystroke. than 2 seconds. The handset is outside No radio connection the base station range. Move closer to the to the base station: base station. -
Page 40
Environment Used equipment and used handset batteries must be disposed of in compliance with current environmental protection regulations. You should return them to your reseller or dispose of them at an approved recycling centre. Do not attempt to open the batteries, as they contain chemical substance.
http://mdrv.ru/form?keyword=%d0%b8%d0%bd%d1%81%d1%82%d1%80%d1%83%d0%ba%d1%86%d0%b8%d1%8f+%d1%82%d0%b5%d0%bb%d0%b5%d1%84%d0%be%d0%bd+thomson+telecom
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
инструкция пользования mf3228 инструкция на кит нокия 72 p43 es3g инструкция инструкция телефон thomson ce21815ge2 a. Здравствуйте,имею на руках такой телефон-Thomson telecom ru21828ge4-b. Ищу инструкцию для видеокамеры THOMSON VMD 2S The THOMSON TG782 offers two phone connectors to accommodate a. Wireless VoIP Residential Gateway. SatElIttE. CaBlE. tErrEStrIal. tElECoM. Voice. Manual/auto selection of pure 802.11g/mixed mode (802.11b/g) network. • Wireless. Please thoroughly read this user manual for all the feature operation and troubleshooting.. A CAUTION: Use only the Thomson Telecom power supply. Результаты поиска принципиальной схемы инструкция на телефон THOMSON TELECOM rU21806GE2-Adoc circuit. No part of this manual may be reproduced or transmitted in any form or by any means without prior written… The wireless device (laptop, tablet, or mobile phone) to connect to the HG630b is.. Telecom USB Mobile Broadband T-Stick. ?. Помогите найти драйвера для Skype телефона GE (Thomson Telecom) мод: RU21878GE5-A. — инструкция… инструкция телефона changjiang x10 Не включается трубка радио телефона Thomson Telecom. батарейный отсек а вот установить дату и время никак нет инструкции. Thomson Telecom declares that this ST2030 MGCP IP Phone is in compliance with the essential requirements and other relevant provisions of Directive. RD6000 is a receiver/decoder designed for all satellite and telecom contribution networks requiring up to MPEG-2/H.264 4:2:2 10-bit streams. RD6000. #Trends. Virgin Media provides great value fibre power broadband, television, Home Phone and Mobile Bundles. The home of Ireland’s best broadband just got faster! телефон thomson telecom ru29350ge2 a телефон thomson telecom ru29350ge2 a. эксплуатация ваз 2199-эксплуатация ваз 2199. инструкция по сборке. Скачать в архиве: Телефон Thomson telecom инструкция — TXT Новые загрузки: Телефон Thomson telecom инструкция — TXT. название в базе-thomson telecom телефон инструкция ce27850ge4 b. классификатор thomson telecom телефон инструкция ce27850ge4 b подскажите где найти инструкцию к телефону thomson telecom ru21880ge4-b. случайно выключили трубку, а включить не можем. Анна Мастер (1380). инструкция на телефон томсон telecom ru21816ge6 a. yaesu vx 6 инструкция, фото 5 из 6. Добавлено 28.01.2014. инструкция на телефон томсон. Searching for a new phone. Need to upgrade or support an existing system? If so, let us help you! We offer our latest Communications Solutions. MORE. Your phone uses 4 LRO3-AAA 1.5V alkaline batteries (not included). Insert or. Thomson Telecom hereby declares that the TEMPORIS 500 conforms to the. TELECOM. Dealer/Address/Phone:… The Thomson digital cable modem serves as a two-way high-speed bridge between your personal computer and a. Technicolor ST2030 an IP Phone for Enterprise MarketPhone presentation here!Page ContentsFeatures available in both SIP and MGCP. THOMSON Telecom Belgium NV . Prins Boudewijnlaan, 47.. 3 Manual Installation… Connecting a DECT Phone to Your Thomson Gateway . Начать загрузку: Телефон Thomson telecom инструкция — в архиве. Ссылка: Телефон Thomson telecom инструкция — fb2. 936 раз Par la presente Thomson Telecom declare que TEMPORIS 200 est… TEL-Telefonsystem angeschlossen sind, informiert Sie die Nachrichtenleuchte.. instalacion o utilizacion no conforme con las instrucciones dadas en este manual;. Thomson TG585v7 Router. Thomson TG585v7 Router. Read this first. No DSL cable connected/ Microfilter or phone line problem. Blinking. Green. Router is. 10 results for : THOMSON TELECOM CORDNESS PHONE 28215. ACTIONTEC. ALCATEL — BE1 / BE2 Mobile Phone (Service Manual in English) · ALCATEL. Приветствую всех! Очень давно искал thomson telecom ru21880ge3-b инструкция и всеже нашел! Это наилучшее из того что находил. Примерно год назад мне попался телефон Thomson Telecom. Чтобы ее подружить со Skype, нужно аккуратно по инструкции. Радиотелефоны dect и проводные телефоны — барахолка onliner by Название: ИНСТРУКЦИЯ НА РАДИОТЕЛЕФОН THOMSON TELECOM Формат книги:. General Electric CE21886GE9-A is sometimes reffered as Thomson Telecom CE21886GE9-A. I have this phone and I had really hard time. не включается трубка радио телефона Thomson Telecom.. батарейный отсек а вот установить дату и время никак нет инструкции. THOMSON. THOMSON assumes no responsibility or liability for any errors or inaccuracies that may appear… phone wall outlet or distributed filter. 2. Insert the. Есть у когонибудь инструкция на телефон.Как привязать трубку к базе? Проблема в том что трубка не подключается к базе. Storing a Number from the Received list to the Phone Book. 11.. MANUAL. Risk of explosion if you use incompatible batteries. Never use non-rechargeable. Хотела убавить звук на этом телефоне, но не умею…может. THOMSON TELECOM MODEL No: CE27850GE2-B 3610HY S/No: 60008688. Радиотелефон Tomson Telecom ru21816ge3-a – Список форумов. depositfiles.com/ru/files/ivatfaktm инструкция к телефону atlinks хотя. Инструкция по настройке пульта приставки IPTV, для управления телевизором… Thomson. 0625 0560 0343 0287 0109 0471 0335 0205 0037 0556 1447. Телефон службы поддержки: 8-800-450-0-150 (звонок бесплатный) Thomson Telecom declares that this ST2030 IP Phone is in compliance with the. instructions in this manual, may cause interference to radio communications. дата ввода документа, телефон thomson telecom ru21880ge4 b. инструкция по эксплуатации рисоваркой-инструкция по эксплуатации рисоваркой. беспроводной телефон с двойным режимом АОН*. Инструкция по использованию. Company) и находится под лицензией Thomson Telecom, France. Thomson Telecom hereby declares that the 21825 conforms to the essential. should have one phone in your home that isn’t cordless, in case the power in your. Thomson Telecom declares that this ST2030 IP Phone is in compliance with the essential. used in accordance with the instructions in this manual, may cause. Thomson Telecom ( GE) RU21816GE4 -A переключение. Electric 21816. радиотелефон General Electric Инструкции. оргтехника. инструкция телефона thomson telecom model no ru21806ge6 a date code 2807 асп вет препарат dhs 3060 инструкция инструкция на. Telstra Voice Assistant can help you activate and de-activate Telstra Phone Features, eg. Call Waiting and Call Forward. This feature enables you to arrange an. Thomson Telecom declares that this ST2022 MGCP IP Phone is in. installed and used in accordance with the instructions in this manual, may cause. Most KC phone packages include free local calls.. A lot of information is currently held in the pricing manual and you may find it difficult. So below is a brief. Download manual Mobile phone THOMSON TELECOM TG787. Download manual Router/ modem THOMSON TELECOM TG 585 — QTEL ADSL WIFI. помогите с инструкцией на телефон thomson telecom RU21816GE6-A Телефоны и Радиотелефоны. VoIPReady. Phone. WLAN. USB. 2. 1. 4. 3. 2. 1. Thomson ST716v5 (WL). Installation and Setup Guide. in this document. Thomson Telecom Belgium.. Following typographical convention is used throughout this manual: > Sample text. Инструкция к телефону thomson telecom модель ru29350ge2-a. Есть у когонибудь инструкция на телефон. Рейтинг увеличивается за. Помогите перевести телефон ATLINKS EX29398-B в пульс. все. gta-200 зарядное. инструкция радиотелефона Thomson Telecom. Thomson Telecom Belgium. Prins Boudewijnlaan, 47.. Typographical Conventions. Following typographical convention is used throughout this manual:. Радиотелефон Thomson Telecom RN21867GE5-A. Цветной дисплей на 65тыс. цветов. для подключения,держатель тел.трубки,инструкция,упаковка. TELECOM.. Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone. If you are concerned with interference, please refer to the owner’s manual for these devices. Thomson ST2030 IP Phone is a hardphone, which uses the Session Initiation… the admin manual, I need a software named TOOLS for THOMSON ST2020. socket located on the left-hand side of the phone (B). • Plug the telephone. (Ask at your local Telecom company or your.. An ALCATEL/THOMSON multimedia. Инструкция по пользованию телефоном thomson telecom ru21880ge4 b. fucking__muser да не, он пошутил и не ел меня, а просто телефон отобрал,. This article covers both initial setup and manual configuration if. You can plug an analogue phone into the phone socket on the microfilter.
https://docs.google.com/forms/d/1kGD6w6qHeyr7b0JjUxCg4hbrLRBoVEDxWUPvmNcK34w/viewform
https://docs.google.com/forms/d/1rcqqjpVBRFPMiX5p83S19pieGXuomciXPSqWuxiTVtg/viewform
https://docs.google.com/forms/d/1pdkuru-V-SoMvPNDH8ziM4WT62nePFPLQOq2cLPPsTs/viewform
https://docs.google.com/forms/d/1GRPDKofNJ8r8R6XZeUWmm6dKIdHu77ZGbetUo0g5Hek/viewform
https://docs.google.com/forms/d/1jytznky_PfivletmDR2ptjPyUlS6EZmcvEnLTjrvWRk/viewform