Related Documents
I18D00082 External Photo | External Photos | |
I18D00082 Internal Photo | Internal Photos | |
I18D00082 Internal Photo | ID Label/Location Info | |
UM-V1 | Users Manual |
Name and Content of Toxic or Harmful Substances in this Product ① USB interface Open handle NFC reader Camera Flash light Printer Adapter Magnetic card reader Extend pins Indicator light Printing paper Power button USB interface SAM card slot SIM card slot ③ Part Name Components of circuit board Lead (Pb) ② SIM Volume buttons supply socket Toxic or Harmful Substances or Elements Mercury (Hg) Cadmium (Cd) IC card reader Speaker Battery Strap ring Battery cover Return button Home button Menu button Power button Short Press: Wake up the screen, lock the screen. Long Press: Long press for 2-3 seconds in power off mode switches on the device. Long press for 2-3 seconds in normal operation mode selects power off or reboot. Long press for 11 seconds when system is frozen automati cally reboots. Indicator light Remind the payment steps for band card. USB interface Use for charging or developer debugging. Camera 5M Auto Focus, 1D&2D scanner. Flash light For lighting in camera mode. Volume buttons Volume adjusts. These buttons can be set as quick scan button by app setting. SAM card slot For inserting encrypted SAM cards. Printer For printing sales slips in power on mode. SIM card slot Return button Tap to return to the previous screen. Home button Tap to quickly go back home screen. Note: To prevent system errors, please make sure the device is off when you insert or remove the SIM card. · Move the battery cover horizontally to open. · Insert/remove SIM card in the direction as shown. · Fasten the battery cover horizontally. (Support GSM/CDMA/WCDMA/TDS CDMA/EVDO/LTE SIM card.) Menu button Tap to quickly view the background apps. Select the app and slide laterally to close. Battery Avoid contacting with water, metal material and other electrically equipment while in use. Magnetic card reader Read the magnetic stripe information of bank cards. Strap ring For fixing handheld strap to prevent slippage. IC card reader Read the chip-based band cards. Extend pins To connect to dock.(Need to buy dock separately) NFC reader Read the contactless card information. Printing instructions This device support 58mm thermal paper with the specification of 57±0.5mm×Ø40mm · Please open pater container with open handle, as shown in Fig.1. Please don’t open directly to damage print gear. · Put the paper correctly into the pater container as shown and pull some paper outside the cutter, as shown in Fig.2. · Close the cover of pater container to finish print paper feeding, as shown in Fig.3. Note: If the printed paper is blank, please check whether the paper roll has been installed wrong. Ultra-simple setting Only a few steps to start the smart business device ① 2G/3G/4G settings, in the power-off status, insert related 2G(GSM/CDMA)/3G(WCDMA/TDS CDMA/EVDO)/4G(LTE) SIM card and then power it on. (For card support details, please read the technical specification table) ② Long-press the power button for 2 to 3 seconds, and then the screen is lightened. Enter the first power-on interface and just operate according to instructions. The device provides two Internet accessing modes for selection. ③ WIFI setting ·Click the [setting] button, then enable WLAN, enter the WLAN search interface, and wait for its search for accessible WLAN hotspots and the result; ·Click on the WLAN you want to connect to. If you select an encrypted network, you need to enter the access code to connect. How to download/un-install applications In the networked mode, open the application market, browse and download applications to complete the installation of related applications. Software uninstall method: select "Settings-> Applications-> Manage Applications-> Uninstall" to uninstall the application; or long press the icon to drag it to the trash to uninstall. Instructions for charging and battery This device supports charging by USB cable or dock. · Connect the 5V adapter to the power supply socket. · Connect the USB cable to USB interface of the device. · The screen will display charging icon during charging. · Please check the USB connect if there is no charging icon. Instructions/Notes for battery · This device adopts 3.6V/5200mAh Lithium battery, please don’t remove the battery. · In order to protect the battery life, please charge your device whenever possible and don’t let battery to fully drain before charging. Trouble shooting Printer not working · Make sure the cover of paper container is closed correctly. · Make sure the right printing pater is used and fed. · Check whether 58mm × 40mm thermal paper roll is fed into the paper container. · If the printed paper is blank, please check whether the paper roll has been installed in the correct direction. Hexavalent chromium (Cr(VII) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Means that the content of the toxic or harmful substance in all homogeneous materials of this part is below the limit stipulated in SJ/T11363-2006. Means that the content of the toxic or harmful substance in at least one of the homogeneous materials of this part is beyond the limit stipulated in SJ/T11363-2006; but as for the component marked with “×” on the table, the content is beyond the l imit since there is no alternative mature technology in the industry yet. The device can’t be power on(eg, exhausted battery). · Connect the device properly with a USB cable to charge for three minutes. · Check whether the charging icon is displayed or not. What we can do if the system freezes Press the power button for 11 seconds to reboot. Please read “Help App” in the device for more information on user’s guidance The products reaching or exceeding the environmental service life shall be recycled per “Regulations on the Control and Management of Electronic Information Products” and shall not be littered. Precautions Safety Warning · Insert the AC plug into the AC socket-outlet corresponding to the identification input on the accessory power adapter; · It must not be used where there is any potential explosive gas; · This is a Class A product. In a living environment, this prod uct may cause radio interference. In this case, the user may need to take practical measures against the interference. · bout battery replacement: ① There is a risk of explosion if you replace the battery with a wrong type! ② The replaced battery shall be handed over to repair per sonnel disposal. Do not throw it into the fire! Important Safety Instructions · Try not to install or use the device during lightning, or else there would be lightning stroke danger; · When you find unusual smell, overheat or smoke, please cut off the power immediately; · Be cautious of the sharp paper knife, and please do not touch! ! Suggestions · Do not use it in extremely cold or hot conditions (e.g., near fire or a lighted cigarette); · Do not drop, throw or bend it; · Try to use it in a clean and dustless environment and avoid tiny articles falling into the terminal; · Do not use it near medical equipment without permission. Declaration The company shall not be responsible for the following actions · Any damage caused by not using and maintaining it under the conditions described in the guide; · Any damage or problem caused by optional parts or con sumptive materials (not the original products provided by the company or approved products), the company will assume no responsibility for this. It is not allowed to modify or change the product without the consent of the company. · The operating system of this product supports official system update. If users install ROM system from the third party or modify the system files by means of cracking, it may lead to system instability, as well as security risk and security threat. Disclaimer Owing to the update of the product, some details of this document may not be in conformity with those of the product. Please refer to the material object. The company reserves the right to interpret this document. The company reserves the right to modify this instruction book without prior notice. Product technical specifications Item Operating system Technical Specifications This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Technical features and characteristic (1) This device may not cause harmful interference. the product includes the following features and characteristics: (2) This device must accept any interference received, including interference that may cause undesired operation. Operation Frequency Transmitted Android 6.0 FCC ID: 2AH25W6900 GSM850 824MHz-849MHz 33dBm CPU MTK 6737 GSM1900 1850MHz-1910MHz 29dBm CPU basic frequency Quad-core 1.3GHz NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. WCDMA bandII 1850MHz-1910MHz 21.5dBm NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. WCDMA bandIV 1710MHz-1755MHz 22.5dBm WCDMA bandV 824MHz-849MHz 22.5dBm LTE Band 2 1850MHz-1910MHz 23.5dBm LTE Band 4 1710MHz-1755MHz 23.5dBm LTE Band 7 2500MHz-2570MHz 21.5dBm LTE Band 17 704MHz-716MHz 23.5dBm CDMA BC0 824MHz-849MHz 22dBm CDMA BC1 1850MHz-1910MHz 21.5dBm BT 2402MHz-2480MHz 6dBm BLE 2402MHz-2480MHz -1dBm 2412MHz-2462MHz 18dBm RAM 1GB LPDDR3 FLASH 8GB Nand Flash Display 5.5 inch IPS, resolution 1280*720 Touch screen Capacitive multi-touch screen, supportive of the glove mode Camera 500W AF Wireless data 2G:B2/B3/B5/B8 3G:wcdma(B1/B2/B4/B5);EVDO(BC0/BC1) 4G:B2/B4/B7/B17/B28 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. Wi-Fi Build-in WIFI 802.11 a/b/g/n (2.4G/5G) ---Increase the separation between the equipment and receiver. Bluetooth Support of bluetooth 3.0/4.0BLE and iBeacon ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Keys Power key, volume key, Interfaces USB Type C,SIM、PSAM、USB OTG Printer type Thermal Printer Printer paper spec Magnetic card reader Width 58mm, maximum diameter 40mm Track 1/2/3, Bi-directional, ISO7810/7811/7813 IC card reader ISO7816\EMV2000\PBOC3.0 SAM Slot ISO7816 Contactless card reader ISO 1443A/B Battery 3.6V/5200mAh Outline dimensions L211 mm × W83 mm × H54 mm Adapter OUTPUT:DC5V/2A INPUT:AC100~240V/0.3A 50/60Hz ---Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body-worn operations. To comply With RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the user’s body and the handset, including the antenna. wifi 5150MHz-5250MHz 5250MHz-5350MHz 18.5dBm 5725MHz-5850MHz Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Specific Absorption Rate (SAR) information: This wireless phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement. The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Package content One host One user guide (including package content, product warranty card and product qualification certificate) One power adapter One USB cable Device types: W6900 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 1.856W/kg(10gSAR, test distance:0mm,limit 4W/kg)and 1.477W/kg (1gSAR, test distance :5mm,limit 1.6W/kg). This device was tested for body-worn operations with the back of the handset kept 0mm and 5mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm and 5mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Smart POS System User’s Guide Manufacture Room 505 No.388 Song Hu Road Shanghai, China
Document ID | 3901042 |
Application ID | uQ4NeGD1QT7+M3uQG4sAGg== |
Document Description | UM-V1 |
Download: | |
Mirror Download [FCC.gov] | |
Short Term Confidential | No |
Permanent Confidential | No |
Supercede | No |
Document Type | User Manual |
Display Format | Adobe Acrobat PDF — pdf |
Filesize | 71.99kB (899857 bits) |
Date Submitted | 2018-06-26 00:00:00 |
Date Available | 2018-06-27 00:00:00 |
Creation Date | 2018-06-25 15:51:04 |
Producing Software | Adobe PDF library 15.00 |
Document Lastmod | 2018-06-25 15:51:04 |
Document Title | UM-V1 |
Document Creator | Adobe Illustrator CC 2017 (Macintosh) |
Source Exif Data [exif.tools]:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Format : application/pdf Title : P1(4G)英文(美版)用户指南_20180625 Metadata Date : 2018:06:25 15:51:04+08:00 Modify Date : 2018:06:25 15:51:04+08:00 Create Date : 2018:06:25 15:51:04+08:00 Creator Tool : Adobe Illustrator CC 2017 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 248 Thumbnail Format : JPEG Thumbnail Image : (Binary data 19080 bytes, use -b option to extract) Instance ID : uuid:8eff25ef-991d-344b-8703-76b02b591eaa Document ID : xmp.did:af55d80d-dbb2-4204-88a0-bf7bb78d69e0 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:c36523b5-8eca-4a90-ac8b-f397fa5bba78 Derived From Document ID : xmp.did:c36523b5-8eca-4a90-ac8b-f397fa5bba78 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:6be1d812-04ba-4a9c-9d4d-d73e4b069b8f, xmp.iid:af55d80d-dbb2-4204-88a0-bf7bb78d69e0 History When : 2016:07:14 11:48:52+08:00, 2018:06:25 15:51:02+08:00 History Software Agent : Adobe Illustrator CC 2015 (Macintosh), Adobe Illustrator CC 2017 (Macintosh) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 432.500017 Max Page Size H : 195.999065 Max Page Size Unit : Millimeters Font Name : PingFang-SC-Medium, PingFang-SC-Regular, PingFangSC-Medium Font Family : 苹方, 苹方, 苹方-简 Font Face : 中等, 常规, 中黑体 Font Type : TrueType, TrueType, Open Type Font Version : 10.11d9e1, 10.11d9e1, 13.0d1e3 Font Composite : False, False, False Font File Name : PingFang Medium.ttf, PingFang Regular.ttf, PingFang.ttc Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 165 C Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE 165 C Swatch Colorant Type : SPOT Swatch Colorant Tint : 100.000000 Swatch Colorant Mode : Lab Swatch Colorant L : 64.705902 Swatch Colorant A : 59 Swatch Colorant B : 68 Producer : Adobe PDF library 15.00 Page Count : 2 Creator : Adobe Illustrator(R) 17.0 For : �տ˱�, Bounding Box : -37 -922 1652 697 Container Version : 11 Creator Version : 21
Open handle
NFC reader
Printer
Magnetic card reader
Indicator light
Power button
USB interface
Volume buttons
IC card reader
Return button Home button Menu button
Power button
Short Press:
Wake up the screen, lock the screen.
Long Press:
Long press for 2-3 seconds in power o mode switches on the device.
Long press for 2-3 seconds in normal operation mode selects power o or reboot.
Long press for 11 seconds when system is frozen automati cally reboots.
Volume buttons
Volume adjusts. These buttons can be set as quick scan button by app setting.
Printer
For printing sales slips in power on mode.
Return button
Tap to return to the previous screen.
Home button
Tap to quickly go back home screen.
Menu button
Tap to quickly view the background apps. Select the app and slide laterally to close.
Magnetic card reader
Read the magnetic stripe information of bank cards.
IC card reader
Read the chip-based band cards.
NFC reader
Read the contactless card information.
Camera
Flash light
Extend pins
SAM card slot
SIM card slot
Speaker
Battery
Strap ring
Battery cover
Indicator light
Remind the payment steps for band card.
USB interface
Use for charging or developer debugging.
Camera
5M Auto Focus, 1D&2D scanner.
Flash light
For lighting in camera mode.
SAM card slot
For inserting encrypted SAM cards.
SIM card slot
Note: To prevent system errors, please make sure the device is o when you insert or remove the SIM card.
·Move the battery cover horizontally to open.
·Insert/remove SIM card in the direction as shown.
·Fasten the battery cover horizontally.
Support GSM/CDMA/WCDMA/TDS CDMA/EVDO/LTE SIM card.
Battery
Avoid contacting with water, metal material and other electrically equipment while in use.
Strap ring
For fixing handheld strap to prevent slippage.
Extend pins
To connect to dock.(Need to buy dock separately)
Printing paper
Printing instructions
This device support 58mm thermal paper with the specification of
57±0.5mm×Ø40mm
·Please open pater container with open handle, as shown in Fig.1. Please don’t open directly to damage print gear.
·Put the paper correctly into the pater container as shown and pull some paper outside the cutter, as shown in Fig.2.
·Close the cover of pater container to finish print paper feeding,
as shown in Fig.3.
Note: If the printed paper is blank, please check whether the paper roll has been installed wrong.
Ultra-simple setting
Only a few steps to start the smart business device
2G/3G/4G settings, in the power-o status, insert related 2G(GSM/CDMA)/3G(WCDMA/TDS CDMA/EVDO)/4G(LTE) SIM card and then power it on. (For card support details, please read the technical specification table)
Long-press the power button for 2 to 3 seconds, and then the screen is lightened. Enter the first power-on interface and just operate according to instructions. The device provides two Internet accessing modes for selection.
WIFI setting
·Click the [setting] button, then enable WLAN, enter the WLAN search interface, and wait for its search for accessible WLAN hotspots and the result;
·Click on the WLAN you want to connect to. If you select an encrypted network, you need to enter the access code to connect.
How to download/un-install applications
In the networked mode, open the application market, browse and download applications to complete the installation of related applications.
Software uninstall method: select «Settings-> Applications-> Manage Applications-> Uninstall» to uninstall the application; or long press the icon to drag it to the trash to uninstall.
USB interface
Adapter
supply socket
Instructions for charging and battery
This device supports charging by USB cable or dock.
·Connect the 5V adapter to the power supply socket.
·Connect the USB cable to USB interface of the device.
·The screen will display charging icon during charging.
·Please check the USB connect if there is no charging icon.
Instructions/Notes for battery
·This device adopts 3.6V/5200mAh Lithium battery, please don’t remove the battery.
·In order to protect the battery life, please charge your device whenever possible and don’t let battery to fully drain before charging.
Trouble shooting
Printer not working
·Make sure the cover of paper container is closed correctly.
·Make sure the right printing pater is used and fed.
·Check whether 58mm × 40mm thermal paper roll is fed into the paper container.
·If the printed paper is blank, please check whether the paper roll has been installed in the correct direction.
The device can’t be power on(eg, exhausted battery).
·Connect the device properly with a USB cable to charge for three minutes.
·Check whether the charging icon is displayed or not.
What we can do if the system freezes
Press the power button for 11 seconds to reboot.
Please read “Help App” in the device for more information on user’s guidance
Name and Content of Toxic or Harmful Substances in this Product
Toxic or Harmful |
Part Name |
Substances |
|
or Elements |
Components of circuit board |
Lead |
|
Pb |
|
Mercury |
|
(Hg) |
|
Cadmium |
|
(Cd) |
|
Hexavalent |
|
chromium |
|
(Cr(VII) |
|
Polybrominated |
|
biphenyls |
|
(PBB) |
|
Polybrominated |
|
diphenyl ethers |
|
(PBDE) |
|
Means that the content of the toxic or harmful substance in all homogeneous materials of this part is below the limit stipulated in SJ/T11363-2006.
Means that the content of the toxic or harmful substance in at least one of the homogeneous materials of this part is beyond the limit stipulated in SJ/T11363-2006; but as for the component marked with “×” on the table, the content is beyond the l imit since there is no alternative mature technology in the industry yet.
The products reaching or exceeding the environmental service life shall be recycled per “Regulations on the Control and
Management of Electronic Information Products” and shall not be littered.
Power button
Volume buttons
Menu buttonHome buttonReturn button
Instructions for charging and battery
This device supports charging by USB cable or dock.
· Connect the 5V adapter to the power supply socket.
· Connect the USB cable to USB interface of the device.
· The screen will display charging icon during charging.
· Please check the USB connect if there is no charging icon.
Instructions/Notes for battery
· This device adopts 3.6V/5200mAh Lithium battery, please don’t
remove the battery.
· In order to protect the battery life, please charge your device
whenever possible and don’t let battery to fully drain before
charging.
Open handle
NFC reader
①
③
②
SIM card slot
Battery
Battery cover
Indicator light
Printer
Speaker
IC card reader
Magnetic card reader
Ultra-simple setting
Trouble shooting
Printer not working
· Make sure the cover of paper container is closed correctly.
· Make sure the right printing pater is used and fed.
· Check whether 58mm × 40mm thermal paper roll is fed into the
paper container.
· If the printed paper is blank, please check whether the paper roll
has been installed in the correct direction.
The device can’t be power on(eg, exhausted battery).
· Connect the device properly with a USB cable to charge for
three minutes.
· Check whether the charging icon is displayed or not.
What we can do if the system freezes
Press the power button for 11 seconds to reboot.
Printing paper
SIM
SAM card slot
Strap ring
USB interface
Indicator light
Remind the payment steps for band card.
USB interface
Use for charging or developer debugging.
Camera
5M Auto Focus, 1D&2D scanner.
Flash light
For lighting in camera mode.
SAM card slot
For inserting encrypted SAM cards.
SIM card slot
Note: To prevent system errors, please make sure the device is off when
you insert or remove the SIM card.
· Move the battery cover horizontally to open.
· Insert/remove SIM card in the direction as shown.
· Fasten the battery cover horizontally.
(Support GSM/CDMA/WCDMA/TDS CDMA/EVDO/LTE SIM card.)
Battery
Avoid contacting with water, metal material and other electrically
equipment while in use.
Strap ring
For fixing handheld strap to prevent slippage.
Extend pins
To connect to dock.(Need to buy dock separately)
Printing instructions
This device support 58mm thermal paper with the specification of
57±0.5mm×Ø40mm
· Please open pater container with open handle, as shown in
Fig.1. Please don’t open directly to damage print gear.
· Put the paper correctly into the pater container as shown and
pull some paper outside the cutter, as shown in Fig.2.
· Close the cover of pater container to finish print paper feeding,
as shown in Fig.3.
Note: If the printed paper is blank, please check whether the paper roll has
been installed wrong.
Only a few steps to start the smart business device
① 2G/3G/4G settings, in the power-off status, insert related 2G(GSM/CD-
MA)/3G(WCDMA/TDS CDMA/EVDO)/4G(LTE) SIM card and then power it on.
(For card support details, please read the technical specification table)
② Long-press the power button for 2 to 3 seconds, and then the screen is
lightened. Enter the first power-on interface and just operate according to
instructions. The device provides two Internet accessing modes for selection.
③ WIFI setting
·Click the [setting] button, then enable WLAN, enter the WLAN search
interface, and wait for its search for accessible WLAN hotspots and the
result;
·Click on the WLAN you want to connect to. If you select an encrypted
network, you need to enter the access code to connect.
How to download/un-install applications
In the networked mode, open the application market, browse and download
applications to complete the installation of related applications.
Camera
Flash light
Extend pins
Software uninstall method: select «Settings-> Applications-> Manage
Applications-> Uninstall» to uninstall the application; or long press the
icon to drag it to the trash to uninstall.
USB interface
supply socket
Adapter
Power button
Short Press:
Wake up the screen, lock the screen.
Long Press:
Long press for 2-3 seconds in power off mode switches on the
device.
Long press for 2-3 seconds in normal operation mode selects
power off or reboot.
Long press for 11 seconds when system is frozen automati cally
reboots.
Volume buttons
Volume adjusts. These buttons can be set as quick scan button by
app setting.
Printer
For printing sales slips in power on mode.
Return button
Tap to return to the previous screen.
Home button
Tap to quickly go back home screen.
Menu button
Tap to quickly view the background apps.
Select the app and slide laterally to close.
Magnetic card reader
Read the magnetic stripe information of bank cards.
IC card reader
Read the chip-based band cards.
NFC reader
Read the contactless card information.
Please read “Help App” in the device
for more information on user’s guidance
Name and Content of Toxic or Harmful
Substances in this Product
Means that the content of the toxic or harmful substance
in all homogeneous materials of this part is below the limit
stipulated in SJ/T11363-2006.
Means that the content of the toxic or harmful substance in
at least one of the homogeneous materials of this part is
beyond the limit stipulated in SJ/T11363-2006; but as for
the component marked with “×” on the table, the content is
beyond the l imit since there is no alternative mature
technology
in the industry yet.
Part Name
Components of circuit board
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VII)
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Toxic or Harmful
Substances
or Elements
The products reaching or exceeding the environmental service
life shall be recycled per “Regulations on the Control and
Management of Electronic Information Products” and shall not
be littered.
Precautions
Product technical specifications
Camera 500W AF
FLASH 8GB Nand Flash
CPU MTK 6737
CPU basic
frequency Quad-core 1.3GHz
Keys Power key, volume key,
Display 5.5 inch IPS, resolution 1280*720
Operating
system Android 6.0
Bluetooth Support of bluetooth 3.0/4.0BLE and iBeacon
RAM 1GB LPDDR3
Interfaces USB Type C,SIM、PSAM、USB OTG
Printer type Thermal Printer
Printer paper
spec Width 58mm, maximum diameter 40mm
Touch screen Capacitive multi-touch screen, supportive of the glove mode
Wireless data
2G:B2/B3/B5/B8
3G:wcdma(B1/B2/B4/B5);EVDO(BC0/BC1)
4G:B2/B4/B7/B17/B28
Item Technical Specifications
Package content
One host
One user guide (including package content, product warranty
card and product qualification certificate)
One power adapter
One USB cable
Battery 3.6V/5200mAh
IC card reader ISO7816EMV2000PBOC3.0
Contactless
card reader ISO 1443A/B
SAM Slot ISO7816
Magnetic card
reader Track 1/2/3, Bi-directional, ISO7810/7811/7813
Outline
dimensions L211 mm × W83 mm × H54 mm
Adapter OUTPUT:DC5V/2A
INPUT:AC100~240V/0.3A 50/60Hz
Safety Warning
· Insert the AC plug into the AC socket-outlet corresponding
to the identification input on the accessory power adapter;
· It must not be used where there is any potential explosive
gas;
· This is a Class A product. In a living environment, this prod
uct may cause radio interference.
In this case, the user may need to take practical measures
against the interference.
· bout battery replacement:
① There is a risk of explosion if you replace the battery with
a wrong type!
② The replaced battery shall be handed over to repair per
sonnel disposal. Do not throw it into the fire!
Important Safety Instructions
· Try not to install or use the device during lightning, or else
there would be lightning stroke danger;
· When you find unusual smell, overheat or smoke, please cut
off the power immediately;
· Be cautious of the sharp paper knife, and please do not
touch! !
Suggestions
· Do not use it in extremely cold or hot conditions (e.g., near
fire or a lighted cigarette);
· Do not drop, throw or bend it;
· Try to use it in a clean and dustless environment and avoid
tiny articles falling into the terminal;
· Do not use it near medical equipment without permission.
Declaration
The company shall not be responsible for the following actions
· Any damage caused by not using and maintaining it under the
conditions described in the guide;
· Any damage or problem caused by optional parts or con
sumptive materials (not the original products provided by the
company or approved products), the company will assume no
responsibility for this. It is not allowed to modify or change
the product without the consent of the company.
· The operating system of this product supports official system
update. If users install ROM system from the third party or
modify the system files by means of cracking, it may lead to
system instability, as well as security risk and security threat.
Disclaimer
Owing to the update of the product, some details of this docu—
ment may not be in conformity with those of the product.
Please refer to the material object. The company reserves the
right to interpret this document. The company reserves the
right to modify this instruction book without prior notice.
Smart POS System
User’s Guide
Wi-Fi Build-in WIFI 802.11 a/b/g/n(2.4G/5G)
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC ID: 2AH25W6900
NOTE: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Body-worn Operation
This device was tested for typical body-worn operations. To comply
With RF exposure requirements, a minimum separation distance of
1.0cm must be maintained between the user’s body and the handset,
including the antenna.
Third-party belt-clips, holsters, and similar including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply with
RF exposure requirements and should be
avoided.
Specific Absorption Rate (SAR) information:
This wireless phone meets the government’s requirements for exposure
to radio waves. The guidelines are based on standards that were
developed by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons
regardless of age or health.
FCC RF Exposure Information and Statement. The SAR limit of USA
(FCC) is 1.6W/kg averaged over one gram of tissue.
Device types: W6900 has also been tested against this SAR limit. The
highest SAR value reported under this standard during product certifica-
tion when properly worn on the body is 1.856W/kg(10gSAR, test
distance:0mm,limit 4W/kg)and 1.477W/kg (1gSAR, test distance
:5mm,limit 1.6W/kg). This device was tested for body-worn
operations with the back of the handset kept 0mm and 5mm from the
body. To maintain compliance with FCC RF exposure requirements, use
accessories that maintain a 0mm and 5mm separation distance between
the user’s body and the back of the handset. The use of belt clips,
holsters and similar accessories should not contain metallic components
in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and
should be avoided.
Manufacture
Room 505 No.388 Song Hu Road Shanghai, China
Technical features and characteristic
the product includes the following features and characteristics:
GSM850
GSM1900
WCDMA bandII
WCDMA bandIV
WCDMA bandV
LTE Band 2
LTE Band 4
LTE Band 7
LTE Band 17
CDMA BC0
CDMA BC1
BT
BLE
Operation Frequency
824MHz-849MHz
1850MHz-1910MHz
1850MHz-1910MHz
1710MHz-1755MHz
824MHz-849MHz
1850MHz-1910MHz
1710MHz-1755MHz
2500MHz-2570MHz
704MHz-716MHz
824MHz-849MHz
1850MHz-1910MHz
2402MHz-2480MHz
2402MHz-2480MHz
Transmitted
33dBm
29dBm
21.5dBm
22.5dBm
22.5dBm
23.5dBm
23.5dBm
21.5dBm
23.5dBm
22dBm
21.5dBm
-1dBm
6dBm
wifi
2412MHz-2462MHz
5150MHz-5250MHz
5250MHz-5350MHz
5725MHz-5850MHz
18dBm
18.5dBm
Беспроводной платежный smartPOS-терминал P2
Отличительная черта данного терминала – инновационность! Такое оборудование трудно не заметить: новое
устройство привлекает внимание, т.к. на рынке оно представлено впервые, позволяет быстро оплачивать ваши
товары и услуги с использованием банковских карточек, выделяет на фоне конкурентов, облегчает вашу работу и
делает повседневные операции быстрее.
Обслуживание платежей (эквайринг) выполняют: ЗАО «МТБанк», ОАО
«Белгазпромбанк», ОАО «Банк БелВЭБ», ОАО «АСБ Беларусбанк», ОАО «Паритетбанк», ОАО «Белаграпромбанк», «ЗАО БСБ
Банк», «Приорбанк» ОАО.
За полную стоимость:
1050.00
С услугой эквайринга
от ОАО «Банк БелВЭБ»:
900.00
Внимание! Рассрочка предоставляется при стоимости оборудования от 3000 бел.руб. в рамках партнерского
продукта
ЗАО «МТБанк» — «ЗАРАЗ»
только для клиентов, у которых есть оборот по расчетному счету в течение предыдущих 3 месяцев.
В рамках
партнёрской программы «Мост» от Беларусбанка рассрочка предоставляется без
ограничения суммы на выбор периода: 3, 6 или 12 месяцев.
В аренду:
(ставка арендной платы,
действует с 01.04.2022)
66.00
Все цены указаны в белорусских рублях с НДС
Компактная, удобная, современная мобильная программная касса zPOS P2 с возможностью приема оплаты за товары и услуги,
как за наличные, так и при помощи банковских пластиковых карт.
Купить программную кассу нового поколения означает получить сразу несколько встроенных устройств в одном: кассовый
аппарат, терминал для приема оплаты по банковским карточкам (в том числе с помощью носимых гаджетов: смартфонов,
смарт-часов, смарт-браслетов подключенных к Samsung Pay или Apple Pay), 2D-сканер штрих-кодов, а также чековый
принтер.
Преимущества:
- Возможность приема всех типов банковских карт (с магнитной полосой, с чипом, бесконтактные) платежных систем Visa,
Mastercard, БЕЛКАРТ\МИР, UnionPay - Несколько вариантов подключения к Интернет (WIFI, 3G\4G) для связи с банком-эквайером и оператором программной
кассовой системы - Высокоскоростной чековый принтер
- Современный, стильный дизайн
Сферы применения:
Cфера торговли, общественного питания (не обеспечивает выдачу счета и может использоваться в объектах общественного
питания без обслуживания потребителей официантами (барменами) за столиками), услуг (кроме автомобильных перевозок
пассажиров, автозаправочных станций), за исключением случаев, когда в этих сферах в соответствии с законодательством
для приема денежных средств используются специальные компьютерные системы.
Операционная система:
Android 7.1
Процессор:
quad-core 1.3GHz
Дисплей:
5.5″, HD+, 1440*720, multi-touch
WI-FI:
Поддержка IEEE 802.11 a/b/g/n 2.4GHz/ 5GHz
Bluetooth:
Поддержка BLE 2.1/3.0/4.2
Мобильная передача данных:
2G/3G/4G
Чековый принтер:
Ширина рулона: 58mm;
Диаметр рулона: 40mm;
Скорость печати: 70mm/сек
Аккумулятор:
Литий-полимерный, 7.6V/ 2540 mAh
Адаптер питания:
Вход: AC 100~240V Выход: DC 5V/2A
Камера:
5.0MP, подсветка, AF
Физические кнопки:
Кнопка включения (блокировка экрана), программируемая дополнительная кнопка
Физические интерфейсы:
1 x USB Type C с поддержкой OTG для подключения адаптера питания или СКО;
2 x nano SIM слот;
1 x MINI SAM слот
Размеры устройства:
222*81.6*17.6mm
Условия:
эксплуатация: температура 0℃ ~ 50℃, влажность 10% ~ 90% (без конденсата)
хранение: температура -20℃ ~ 60℃, влажность 5% ~ 95% (без конденсата)
Считыватели банковских карт:
с магнитной полосой (track 1/2/3 двунаправленное чтение, ISO7810/7811);
c чипом (EMV, ISO7816/PBOC3.0);
бесконтактные (Type A/B, ISO/IEC 14443, ISO18092)
Сертификаты:
EMV Contact L1 & L2, EMV Contactless L1 , PCI PTS 5.х;
Visa PayWave, MasterCard PayPass, UnionPay QuickPass, БЕЛКАРТ/МИР;
ТР ТС 004/2010 «О безопасности низковольтного оборудования»;
ТР ТС 020/2010 «Электромагнитная совместимость технических средств»;
ТР ЕАЭС 037/2016 «Об ограничении применения опасных веществ в изделиях электротехники и радиоэлектроники»;
ТР 2018/24/BY (СТБ 1356-2011 «Системы сотовой подвижной электросвязи. Общие технические требования» (пп. 5.10,
5.13, 5.16, 5.19);
СТБ 1788-2009 «Радиосвязь Оборудование беспроводного широкополосного доступа. Требования к параметрам
радиоспектра, электромагнитной совместимости и безопасности» (пп. 5.1.5, 5.2, 5.3);
ГОСТ IEC 60950-1-2014 «Оборудование информационных технологий. Требования безопасности. Часть 1. Общие требования»
(пп. 1.7, 2.1, 2.2);
ГОСТ IEC 62479-2013 «Оценка маломощного электронного и электрического оборудования на соответствие основным
ограничениям, связанным с воздействием на человека электромагнитных полей (10 МГц — 300 ГГц)»;
ГОСТ IEC 62311-2013 «Оценка электронного и электрического оборудования в отношении ограничений воздействия на
человека электромагнитных полей (0 Гц-300 ГГц)».
Комплект поставки терминала smartPOS-терминал P2
Преимущества сервиса Port
Авторизованный сервисный центр для 22 производителей
Услуги по монтажу, настройке, ремонту всего спектра оборудования
Аккредитованные специалисты
Доставка оборудования в сервисный центр
БОЛЬШЕ О СЕРВИСНОМ ЦЕНТРЕ
Обязательная гарантия на услуги
Наша компания является авторизованным сервисным центром, поэтому мы всегда следим за качеством своего обслуживания.Воспользовавшись нашими услугами вы получаете:
Штат специалистов, готовый ответить на вопросы
Бесплатный выезд специалиста
Актуальную документацию по обслуживанию оборудования
БОЛЬШЕ О СЕРВИСНОМ ЦЕНТРЕ
Вам могут быть интересны: