Сервис мануал куосера 3145

• Contents

• Table of Contents

• Troubleshooting

• Bookmarks

Summary of Contents for Kyocera ECOSYS M3145dn

• Return Your Toner
  

  Help the environment by allowing us to recycle your used toners.

• Warranty Extension
  

  Protect your investments by extending your warranty.

• Global Download Centre
  

  Download the initial setup files (included in the setup DVD) such as Printer Drivers, Utilities, and Manuals.

> Preface

i

Preface

Thank you for purchasing this machine.

This Operation Guide is intended to help you operate the machine correctly, perform routine maintenance, and take

simple troubleshooting measures as needed so that the machine can always be used in the optimum condition.

Please read this Operation Guide before using the machine.

To maintain quality, we recommend using genuine own brand toner containers, which must

pass numerous quality inspections.

Please use our genuine toner containers, which have passed rigorous quality control testing.

The use of non-genuine toner containers may cause failure.

We will not be liable for any damages caused by the use of third party supplies in this machine.

A label is affixed to our replacement genuine toner containers, as shown below.

Checking the Equipment’s Serial Number

The equipment’s serial number is printed in the location shown in the figure.

You’ll need the equipment’s serial number when contacting your Service Representative. Please check the number

before contacting your Service Representative

ii

Contents

Preface ………………..…………….…………….…………….…………….……………..…………….……………. i

Contents………………………….…………….…………….………….…………….…………….………..……….. ii

Overview …………..…………….…………….…………….………….…………….…………….………………. viii

Machine Features …………….…………….…………….…………….………….…………….……………...… ix

Color and Image Quality Functions………….……………….……………….………………..………… xiii

Basic Color Modes ……………………….……………..…………….…………….…………….……… xiii

Adjusting Image Quality and Color….………….….………………………..…………….………… xiv

Guides Provided with the Machine…………..…………….…………….…………….…………….……. xv

About the Operation Guide (this Guide) …..…………….………….…………….…………….…….. xvii

Structure of the guide…………………………….……………….………………..……………….….. xvii

Conventions Used in This Guide……………..……….…………….…………….…………….….. xviii

Menu Map…………….…………….…………….…………….………….…………….…………….……….……. xx

1 Legal and Safety Information ………………………………………………………. 1-1

Notice …………..……………..…………….…………….………….…………….…………….………………… 1-2

Safety Conventions in This Guide …………..…….…………….…………….………….……….. 1-2

Environment ………………………….…………….…………….………….…………….……………... 1-3

Precautions for Use …….…………….…………….………….…………….…………….…………… 1-4

Laser Safety (Europe) ……………….………………..……………….……………….……………… 1-5

SAFETY OF LASER BEAM (USA) ..……………..…………….………….……………………… 1-6

Safety Instructions Regarding the Disconnection of Power ……………………………….. 1-7

Compliance and Conformity ……………..………….…………….…………….…………….…….. 1-7

Other precautions (for users in California, the United States) …………..…………….….. 1-7

Warranty (the United States and Canada) .………….…………….…………….……………... 1-8

Legal Restriction on Copying/Scanning ……………………………….………………..……….. 1-9

EN ISO 7779 ……………..…………….…………….…………….……………..…………….……….. 1-9

EK1-ITB 2000 ………….…………….…………….…………….…………….…………….…………… 1-9

Wireless Connection (Mexico only) …………………….……………….………………..……….. 1-9

Security Precautions when Using Wireless LAN (If equipped) ..………………..……….. 1-9

Limited Use of This Product (If equipped) ………………………….……………….…………. 1-10

Legal Information …………………..…………….…………….…………….…………….…………. 1-11

Energy Saving Control Function ………………………..……………….………………..……… 1-17

Automatic 2-Sided Print Function ………………………….…………….…………….…………. 1-17

Resource Saving — Paper ………..…………….…………….…………….…………….…………. 1-17

Environmental benefits of «Power Management» ………………………………………….… 1-17

Energy Star (ENERGY STAR®) Program ………………………………..……………….…… 1-18

2 Installing and Setting up the Machine ………………….………………………. 2-1

Part Names …………………..…………….………….…………….…………….…………….…………….….. 2-2

Machine Exterior ……………………………….…………….…………….…………….……………... 2-2

Connectors/Interior ………..………………..………….…………….…………….…………….…….. 2-4

With Optional Equipments Attached ………….….…………….…………….…………….…….. 2-6

Connecting the Machine and Other Devices ………………….……………..…………….……….. 2-7

Connecting Cables …………….………….…………….…………….…………….…………….…………… 2-8

Connecting LAN Cable ………………………….…………….…………….…………….…………… 2-8

Connecting USB Cable ……………..…………….………………..……………….………………... 2-9

Connecting the Power Cable ……..………………..……………….……………….……………… 2-9

Power On/Off ………………………….……………..…………….…………….…………….…………….... 2-10

Power On ………………….…………….…………….…………….……………..…………….……… 2-10

Power Off ………………….…………….…………….………….…………….…………….…………. 2-10

Using the Operation Panel ……………….…………….…………….……………..…………….……… 2-11

Operation Panel Keys ……………….…………….…………….……………..…………….……… 2-11

Operation Method ………………….…………….…………….…………….…………….…………. 2-12

Display for Originals and Paper .……………….………………..……………….………………. 2-13

Help Screen ……………………….…………….…………….…………….…………….……………. 2-13

iii

Login/Logout ………………………….……………..…………….……………………..……………………. 2-14

Login …………….…………….…………….……………..………………………..…………….……… 2-14

Logout …………..…………….…………….……………..………………………..…………….……… 2-15

Default Settings of the Machine …………………………….……………….……………….…………. 2-16

Setting Date and Time …………………………………..……………….……………….…………. 2-16

Network Setup …….…………….…………….…………….………….…………….…………….…………. 2-17

Configuring the Wired Network …..………………..……………….……………….……………. 2-17

Configuring the Wireless Network ……..……………….……………….………………..……… 2-19

Setting Wi-Fi Direct .…………….…………….…………….………….…………….…………….… 2-23

Energy Saver function ………….………………..……………….……………….………………..……… 2-25

Low Power Mode …………….……………..………….…………….…………….…………….…… 2-25

Sleep and Auto Sleep …………….……………….………………..……………….………………. 2-25

Installing Software ………….…………….…………….…………….…………….…………….…………. 2-28

Software on DVD (Windows) …..……………….………….…………….…………….…………. 2-28

Installing Software in Windows ……..……….…………….…………….…………….…………. 2-29

Uninstalling the Software ……..……………….…………….………………..……………….…… 2-35

Installing Software in Mac Computer …………….…………….…………….…………….…… 2-36

Setting TWAIN Driver ……….………………..……………….………………..……………….…… 2-38

Setting WIA Driver …………………………..…………….…………….…………….…………….… 2-40

Checking the Counter …..…………….…………….…………….…………….…………….……………. 2-41

Additional Preparations for the Administrator ……………….……………..…………….……… 2-42

Sending Documents to a PC …………………….………………..……………….…………….… 2-42

Strengthening the Security ..………….……………..…………….…………….…………….…… 2-42

Command Center RX ……………………….………….…………….…………….…………….…………. 2-44

Accessing Command Center RX …..………………..……………….……………….…………. 2-45

Changing Security Settings ……..…………….…………….…………….…………….…………. 2-46

Changing Device Information …..…………….…………….…………….…………….…………. 2-48

E-mail Settings ………..…………….…………….…………….…………….…………….…………. 2-50

Registering Destinations …..……………..…………….…………….………….…………….…… 2-54

Creating a New Custom Box ……………….…………….…………….…………….……………. 2-55

Printing a document stored in a Custom Box ………….………………..……………….…… 2-56

Transferring Data from Our Other Products .………………….……………..…………….……… 2-58

Migrating the Address Book ……….………………..……………….……………….……………. 2-58

3 Preparation before Use ….……………………………………………………………. 3-1

Loading Paper ……………………..…………….……………..…………….…………….…………….…….. 3-2

Precaution for Loading Paper ……………..……………….…………….………………..……….. 3-3

Loading in the Cassettes ..………………..………….…………….…………….…………….…….. 3-4

Loading Paper in the Multi Purpose Tray ……………………..…………….…………….…….. 3-8

Specifying Paper Size and Media Type …………………………….……………….…………. 3-12

Paper Stopper …………..…………….……………..…………….……………………..……………………. 3-14

Preparation for Sending a Document to a Shared Folder in a PC ……..……………….… 3-15

Making a note of the computer name and full computer name …………………………. 3-15

Making a note of the user name and domain name …………….…………….………….… 3-16

Creating a Shared Folder, Making a Note of a Shared Folder …….…………….……… 3-17

Configuring Windows Firewall ……….………………..……………….……………….…………. 3-21

Registering Destinations in the Address Book ………………………….…………….…………. 3-25

Adding a Destination (Address Book) ..……………….……………….………………..……… 3-25

Adding a Destination on One Touch Key (One Touch Key) ……………..………………. 3-31

4 Printing from PC …………………………………………………………………………. 4-1

Printing from PC ….…………….…………….…………….…………….……………..…………….……….. 4-2

Printing on Non-standard Sized Paper ……….…….…………….…………….…………….….. 4-4

Banner printing ……………..………….…………….…………….……………..…………….……….. 4-5

Printer Driver Print Settings Screen ……..…………….…………….…………….……………... 4-9

Printer Driver Help ……………….…………….…………….…………….…………….……………. 4-10

Changing the Default Printer Driver Settings (Windows 8.1) ……………………….…… 4-10

Canceling Printing from a Computer ………….….…………….…………….…………….…… 4-10

iv

Printing by AirPrint …………………….…………….…………….…………….…………….……………. 4-11

Printing by Google Cloud Print ..………………..……………….………………..……………….…… 4-11

Printing by Mopria …….…………….……………..…………….…………….…………….…………….… 4-11

Printing with Wi-Fi Direct …………….…………….…………….…………….…………….……………. 4-11

Printing Data Saved on the Printer …………….………………….……………..…………….……… 4-12

Specifying the Job Box from a Computer and Storing the Job ……………………….… 4-12

Printing Documents from Private Print Box …….…………….…………….…………….…… 4-13

Printing Document from Stored Job Box …………..……………….……………….…………. 4-15

Printing Document from Quick Copy Box ………….…………….…………….…………….… 4-17

Printing Document from Proof and Hold Box …………………..……………….……………. 4-19

Status Monitor …….…………….…………….…………….………….…………….…………….…………. 4-21

Accessing the Status Monitor ………………………….…………….…………….…………….… 4-21

Exiting the Status Monitor …………………..……………….………………..……………….…… 4-21

Status Monitor Display …………………………….…………….……………..…………….……… 4-21

5 Operation on the Machine …………………………………………………..………. 5-1

Loading Originals …………………………………..………….…………….…………….…………….…….. 5—2

Placing Originals on the Platen …..…………….………………..……………….………………... 5-2

Loading Originals in the Document Processor ……..…………….…………….……………... 5-3

Program ……..…………….…………….……………..…………….…………….…………….…………..……. 5-5

Registering Programs ……………….…………….…………….……………..…………….……….. 5-5

Confirming the Registered Program …………..…………….……………..…………….……….. 5-6

Recalling Program …………………….………………..……………….…………….…………….….. 5-6

Overwriting Program …..…………….…………….…………….………….…………….…………… 5-7

Deleting Program …….………….…………….…………….…………….…………….……………... 5-7

Select Key Settings ..…………….…………….……………..…………….…………….…………….…….. 5-8

Copying ………………………….…………….…………….………….…………….…………….………..……. 5-9

Basic Operation ……….…………….…………….………….…………….…………….……………... 5-9

Canceling Jobs .…………….…………….………….…………….……………..…………….……… 5-11

Sending ………………………….…………….…………….………….…………….…………….………..….. 5-12

Basic Operation ……….…………….…………….………….…………….…………….……………. 5-13

Specifying Destination ……………….…………….………….…………….…………….…………. 5-14

Checking and Editing Destinations …………………….……………….………………..……… 5-20

Confirmation Screen of Destinations …………………..…………….……………….…………. 5-21

Recall ………………………….…………….……………..………………………..…………….……… 5-22

Send to Me (E-mail) ……………….…………….…………….…………….…………….…………. 5-22

Sending to Different Types of Destinations (Multi Sending) …….………………..……… 5-23

Canceling Sending Jobs ………………………………..……………….……………….…………. 5-24

WSD Scan ………………………….…………….…………….…………….…………….……………. 5-25

Using fax server to send a fax

(fax server transmission) ………………………….………….…………….…………….…………. 5-27

Scanning using TWAIN or WIA ..……………….………………..……………….………………. 5-29

How to use the FAX Function ………..…………….…………….…………….…………….…………. 5-30

What is Document Box? …….……………….……………..…………….…………….…………….…… 5-31

Using a Custom Box …….………………………..…………….…………….…………….…………….… 5-33

Creating a New Custom Box ……………….…………….…………….…………….……………. 5-33

Editing and Deleting Custom Box ……..…………….………….…………….…………….…… 5-35

Storing Documents ..……………….……………….…………….………………..……………….… 5-35

Printing Documents ………….………………..……………….………………..……………….…… 5-36

Editing Documents ………..…………….……………..…………….…………….…………….…… 5-37

Deleting Documents ………………….…………….…………….……………..…………….……… 5-38

v

Printing Documents Stored in Removable USB Memory ……………….……………….…… 5-39

Saving Documents to USB Memory (Scan to USB) ..…………….…………….…………….… 5-41

Check the USB Memory Information ……………….…………….……………..…………….……… 5-42

Removing USB Memory …..…………….…………….…………….…………….…………….…………. 5-43

6 Using Various Functions …….………………………………………………………. 6-1

Functions Available on the Machine …………….…….………………………..…………….……….. 6-2

Copy …………..…………….…………….…………….………….…………….…………….…………… 6-3

Send …………..…………….…………….…………….………….…………….…………….…………… 6-4

Custom Box (Printing) …………….……………….……….…………….…………….……………... 6-6

Removable Memory (Store File, Printing Documents) …………………….…………….….. 6-7

Functions ………………………….…………….…………….………….…………….…………….…………… 6-9

ID Card Copy …………….…………….………….…………….…………….…………….…………… 6-9

Original Size ……………………….…………….…………….………….…………….…………….….. 6-9

Paper Selection ……………….………….……………..…………….…………….…………….…… 6-10

Orig. Orientation (Original Orientation) …………………….………………..……………….… 6-11

Mixed Size Orig. (Mixed Size Originals) ……………………….…………….…………….…… 6-12

Collate ………..…………….…………….…………….…………….……………..…………….……… 6-12

Density …………….…………….……………..…………….………….…………….…………….…… 6-12

Original Image ………………………….…………….…………….………….…………….…………. 6-13

EcoPrint ……………………….…………….……………..………………………..…………….……… 6-13

Color Selection …………..………….…………….…………….…………….…………….…………. 6-14

Sharpness ………………………….…………….…………….………….…………….…………….… 6-14

Contrast ……………………….…………….……………..………………………..…………….……… 6-15

Background Density ……………….……………….………………..……………….………………. 6-15

Prevent Bleed-t (Prevent Bleed-thru) ……………….……………….……………….…………. 6-16

Zoom …………….…………….…………….……………..………………………..…………….……… 6-16

Combine …………..…………….……………..…………….………….…………….…………….…… 6-18

Duplex …………..…………….…………….……………..………………………..…………….……… 6-20

Continuous Scan …………..………….…………….…………….……………..…………….……… 6-22

Job Finish Notice …………..…………….……………..…………….………….…………….……… 6-22

File Name Entry ……………………….…………….…………….……………..…………….……… 6-22

Print Override …………….…………….…………….…………….……………..…………….……… 6-23

Quiet Mode .…………….…………….…………….…………….…………….…………….…………. 6-23

Skip Blank Page ………………………….……………..…………….…………….…………….…… 6-23

Duplex (2-sided Original) ……………..……………..…………….…………….…………….…… 6-24

Sending Size ………..………………………..…………….…………….…………….…………….… 6-25

File Format .…………….…………….…………….…………….…………….…………….…………. 6-26

File Separation .…………….…………….……………..…………….…………….…………….…… 6-30

Scan Resolution ………………………….……………..…………….…………….…………….…… 6-30

Subject/Body ………..…………….…………….…………….………….…………….…………….… 6-30

FTP Encrypted TX …………………………..…………….…………….…………….…………….… 6-31

Del. after Print (Delete after Printed) …….…………….…………….…………….……………. 6-31

Storing Size ……………….………….…………….…………….…………….…………….…………. 6-32

Long Original ………………..………….…………….…………….……………..…………….……… 6-32

Encrypted PDF ….…………….……………..…………….…………….…………….…………….… 6-33

JPEG/TIFF Print …………………….…………….…………….…………….…………….…………. 6-33

XPS FitTo Page …………………………………………………………………………..……………. 6-33

7 Status/Job Cancel ………………………………………………………………………. 7-1

Checking Job Status ……………….………….……………..…………….…………….…………….…….. 7-2

Checking Job History ……………..……………..…………….…………….…………….…………….….. 7-8

Sending the Log History ………….…………….……………….………………..……………….… 7-12

Job Operation ………..…………….…………….……………..…………….…………….…………….…... 7-13

Pause and Resumption of Jobs …….……………..…………….…………….………….……… 7-13

Canceling of Jobs …….……………….………………..……………….……………….……………. 7-13

vi

Device/Communication ……………….…………….……………….………………..……………….…… 7-14

Checking the Remaining Amount of Toner and Paper (Paper/Supplies) ………………. 7-16

8 Setup and Registration (System Menu) ……………….………………………. 8-1

System Menu …………………….…………….…………….………….…………….…………….…………... 8-2

System Menu Settings …..…………….……………..…………….………….…………….……….. 8-3

Report …………..…………….…………….……………..………………………..…………….……….. 8-5

System/Network ……………………………..…………….…………….…………….…………….….. 8-7

User/Job Account …………….………….……………..…………….…………….…………….…… 8-23

User Property ………….…………….…………….…………….…………….…………….…………. 8-23

Common Settings …….……………….………………..……………….……………….……………. 8-24

Copy …………..…………….…………….…………….………….…………….…………….…………. 8-38

Printer ………………………….…………….……………..………………………..…………….……… 8-39

Send …………..…………….…………….…………….………….…………….…………….…………. 8-41

FAX ………………………….…………….…………….………….…………….…………….…………. 8-41

Document Box ..…………….…………….………….…………….……………..…………….……… 8-42

Edit Destination ………….…………….…………….…………….……………..…………….……… 8-43

Adjust/Maint. …….…………….……………..…………….………….…………….…………….…… 8-44

9 User Authentication and Accounting (User Login, Job Accounting) 9-1

Overview of User Login Administration …..…………….…………….…………….…………….….. 9-2

Enabling User Login Administration …………….…….…………….…………….…………….…….. 9-3

Setting User Login Administration ……………………..……………….……………….……………… 9-5

Authentication Security …….……….…………….…………….……………..……………………… 9-5

Adding a User (Local User List) ….…………….…………….……………..……………………… 9-6

Changing User Properties ………….…………….…………….……………..…………….……….. 9-9

User Login Administration for Printing ..……………….……………….………………..……… 9-11

To Manage the Users to Scan Using TWAIN ………………..……………….………………. 9-13

To Manage the Users to Scan Using WIA ………..……………….……………….…………. 9-14

To Manage the Users that Send Faxes from a PC ….………………..……………….…… 9-15

Local Authoriz. (Local Authorization) …………………….…………….…………….…………. 9-16

Group Auth. (Group Authorization Settings) ……..…………….…………….…………….… 9-17

Guest Authorization Set. …………………….…………….…………….…………….……………. 9-18

NW User Property (Obtain Network User Property) ……………………..……………….… 9-21

ID Card Settings …………………….…………….…………….…………….…………….…………. 9-22

PIN Login Settings …..…………….………….…………….…………….…………….……………. 9-23

Using User Login Administration …………………………………………………………………….… 9-24

Login/Logout ………..…………….…………….…………….………….…………….…………….… 9-24

Overview of Job Accounting ……………….……………..……………………………………………… 9-25

Enabling Job Accounting ………..……………..……………………………………………………….… 9-26

Job Accounting Access …….………………..……………….………………..…………….……… 9-27

Setting an Account …………….…………….…………….…………….……………..…………….……… 9-28

Adding an Account ………..…………….……………..…………….………….…………….……… 9-28

Restricting the Use of the Machine ………………….……………….……………….…………. 9-30

Editing an Account ..…………….…………….…………….…………….…………….……………. 9-31

Deleting an Account …………………….……………..…………….…………….…………….…… 9-32

Job Accounting for Printing .……………..……………….……………….………………..……… 9-33

Job Accounting for Scan Using TWAIN …..……………….………………..……………….… 9-34

Job Accounting for Scan Using WIA …………………..……………….………………..……… 9-35

Job Accounting for the FAX Transmitted from a Computer .……………….……………. 9-36

Configuring Job Accounting …………….…………….…………….……………..…………….……… 9-37

Default Setting …..…………….……………..………….…………….…………….…………….…… 9-37

Counting the Number of Pages Printed ……..………………..…………….……………….… 9-39

Print Accounting Report …………………..……………….……………….………………..……… 9-40

Using Job Accounting …….…………….…………….…………….…………….…………….…………. 9-41

Login/Logout ………..…………….…………….…………….………….…………….…………….… 9-41

Unknown User Settings ………..………………..……………….……………….…………….…………. 9-42

Unknown ID Job ………………………….……………..…………….…………….…………….…… 9-42

vii

Registering Information for a User whose ID is Unknown ….…………….…………….… 9-43

10 Troubleshooting ……………………………………………………………………….. 10-1

Regular Maintenance ..…………….……………..…………….…………….…………….…………….… 10-2

Cleaning …………..…………….……………..…………….………….…………….…………….…… 10-2

Toner Container Replacement …………….……………….………………..……………….…… 10-5

Waste Toner Box Replacement .……………….…………….……………..…………….……… 10-9

Troubleshooting ……….…………….……………..…………….…………….…………….…………….. 10-11

Solving Malfunctions …..…………….…………….…………….………….…………….……….. 10-11

Responding to Messages .………………..………….…………….…………….…………….…. 10-16

Clearing Paper Jams …………………………….……………….………………..…………….…. 10-27

11 Appendix ………………………………………………………………………………….. 11-1

Optional Equipment ….…………….……………..…………….………….…………….…………….…… 11-2

Overview of Optional Equipment …………….……………….………………..……………….… 11-2

Optional Applications …………..…………….…………….…………….…………….……………. 11-7

Character Entry Method ………..…………….……………..……………………………………………… 11-9

Using the Keys ………..…………….…………….…………….…………….…………….…………. 11-9

Selecting Type of Characters …..…………….……………….………………..……………….. 11-10

Characters That Can be Entered Using the Numeric Keys ………………………….…. 11-10

Entering Symbols ….…………….…………….…………….…………….…………….………….. 11-11

Entering Characters …………………….……………..…………….………….…………….……. 11-11

Entering Using the Character Selection Screen ………………….……………….……….. 11-13

Paper …………………………..…………….…………….………….…………….…………….…………….. 11-14

Basic Paper Specifications ……………….…………….……………….……………….……….. 11-14

Choosing the Appropriate Paper …………….……………….………………..……………….. 11-15

Special Paper ……………….………….…………….…………….……………..…………….……. 11-18

Specifications ……..…………….…………….…………….………….…………….…………….……….. 11-22

Machine ……………………….…………….……………..…………….…………….…………….…. 11-22

Copy Functions …….………………………..…………….…………….…………….…………….. 11-24

Printer Functions ……………..………………..……………….………………..……………….…. 11-24

Scanner Functions ………..………………..……………….……………….………………..……. 11-25

Document Processor …………………………….……………….………………..……………….. 11-25

Paper Feeder (500-sheet) (Option) …………………….……………….………………..……. 11-26

Glossary …………..…………….…………….…………….………….…………….…………….………..… 11-27

Index …………….……………..…………….…………….………….…………….…………….………..… Index-1

viii

> Overview

Overview

This machine is equipped standard with copy and print functions, and a scanned image can be sent to an E-mail

recipient as an attachment or to a computer on the same network. On products with a FAX function, it is also possible to

use the fax function.

• Before using the machine, be sure to read the following:

Legal and Safety Information (page 1-1)

• For preparations for use of the machine such as cable connections and software installation, refer to the following:

Installing and Setting up the Machine (page 2-1)

• To learn how to load paper, set up shared folders, and add addresses to the address book, refer to the following:

Preparation before Use (page 3-1)

ix

> Machine Features

Machine Features

The machine is equipped with many useful functions.

Using Various Functions (page 6-1)

Here are some examples.

Optimize your office workflow

Access to frequently used functions

with just one touch (Program)

You can preset frequently used functions.

Once you register frequently used

settings as favorite, you can call up the

settings easily. Using this favorite brings

the same results even if operated by

another person.

Program (page 5-5)

Scan originals of different sizes at a

time (Mixed Size Originals)

It is useful when preparing conference

materials.

You can set the different sized originals at

one time so you don’t need to reset the

originals regardless of size.

Mixed Size Orig. (Mixed Size

Originals) (page 6-12)

Scan a large number of originals in

separate batches and produce as one

job (Continuous Scan)

It is useful when preparing many-page

handouts.

When a large number of originals cannot

be placed in the document processor at

one time, the originals can be scanned in

separate batches and then copied or sent

as one job.

Continuous Scan (page 6-22)

Optimize your office workflow

Send one time with multiple sending

options (Multi Sending)

You can send a same document to the

multiple destinations using a different

method.

You can specify multiple destinations of

different send methods such as E-mail,

SMB, and Fax.

You can reduce your workflow by sending

a job at once.

Sending to Different Types of

Destinations (Multi Sending) (page

5-23)

Save frequently used documents in

the machine (Custom Box)

You can save the frequently used

document in the machine and print it

when needed.

Using a Custom Box (page 5-33)

Send a FAX from a PC

(Sending FAX from PC)

You can save the paper used for sending

a FAX with this function.

You can send a file to be faxed from the

PC without printing the file, so that you

can reduce the number of pieces of paper

and perform sending jobs efficiently.

FAX Operation Guide

1~10

1

1~30

1

11~20

11

21~30

21

x

> Machine Features

Save energy and cost

Save energy as needed

(Energy Saver function)

The machine is equipped with Energy

Saver function that automatically

switched into Sleep Mode.

Energy Saver function (page 2-25)

Use less toner for printing

(EcoPrint)

You can save toner consumption with this

function.

When you only need to check the printed

content, such as a trial print run or

documents for internal confirmation, use

this function to save toner.

Use this function when a high-quality print

is not required.

EcoPrint (page 6-13)

Reduce paper use

(Paper Saving Printing)

You can print originals on both sides of

the paper. You can also print multiple

originals onto one sheet.

Combine (page 6-18)

Duplex (page 6-20)

Save energy and cost Create attractive documents

Skip blank pages when printing

(Skip Blank Page)

When there are blank pages in a scanned

document, this function skips the blank

pages and prints only pages that are not

blank.

Skip Blank Page (page 6-23)

Send a FAX to reduce the

communication cost

(FAX Delayed Transmission)

You can reduce the communication cost

with this function.

The communication cost can be reduced

by setting the timer to the time period

during which the communication cost is

low.

FAX Operation Guide

Prevent image bleed-through

(Prevent Bleed-through)

You can prevent image bleed-through

from the reverse side when scanning thin

originals.

Prevent Bleed-t (Prevent Bleed-thru)

(page 6-16)

xi

> Machine Features

Strengthen security

Password-protect a PDF file

(PDF Encryption Functions)

Use the PDF format’s password security

options to restrict document viewing,

printing and editing.

Encrypted PDF (page 6-33)

Protect data on the SSD

(Encryption / Overwrite)

You can overwrite the unnecessary data

that remains on the SSD automatically.

To prevent an external leakage, the

machine is able to encrypt data before

writing it to the SSD.

Data Security (page 8-21)

Prevent loss of finished documents

(Private Print)

You can temporarily save a printer

document in the machine. By printing the

document from the machine prevents

someone takes your document.

Printing Data Saved on the Printer

(page 4-12)

Strengthen security Use functions more efficiently

Log in by ID card

(Card Authentication)

You can log in simply by touching an ID

card. You don’t need to enter your user

name and password.

Card Authentication Kit(B) «Card

Authentication Kit» (page 11-3)

Strengthen security

(Settings for Administrator)

Various functions are available for

administrators to strengthen security.

Strengthening the Security (page 2-

42)

Make the machine quiet

(Quiet Mode)

You can make the machine quiet by

reducing its running noise. You can

configure this mode by job.

Quiet Mode (page 6-23)

xii

> Machine Features

Use functions more efficiently

Install the machine without concerning

the network cables (Wireless Network)

In an environment where the wireless

LAN is used, you can install the machine

without concerning the network cables.

Setup (page 8-18)

Use USB memory

(USB Memory)

It is useful when you need to print

document outside your office or you

cannot print document from your PC.

You can print the document from the USB

memory by plugging it directly into the

machine.

Original scanned at the machine can be

saved in the USB memory also.

Printing Documents Stored in

Removable USB Memory (page 5-

39)

Saving Documents to USB Memory

(Scan to USB) (page 5-41)

Specify image file format

(File Format)

You can select the various file formats

when sending/storing images.

File Format (page 6-26)

Use functions more efficiently

Perform remote operation

(Command Center RX)

You can access to the machine remotely

to print, send or download data.

Administrators can configure the machine

behavior or management settings.

Command Center RX (page 2-44)

xiii

> Color and Image Quality Functions

Color and Image Quality Functions

The machine is equipped with various color and image quality functions. You can adjust the scanned image as desired.

Basic Color Modes

The basic color modes are as follows.

For details, refer to the following:

Color Selection (page 6-14)

Color mode Description

Reference image Reference

page

Before After

Auto Color Automatically recognizes whether a

document being scanned is color or black

& white.

page 6-14

Full Color Scans a document in full color. page 6-14

Grayscale Scans a document in grayscale. page 6-14

Black & White Scans a document in black & white. page 6-14

xiv

> Color and Image Quality Functions

Adjusting Image Quality and Color

To adjust the image quality or color of an image, use the following functions.

I want to…

Sample image

Function Page

Before After

Adjust the color precisely.

Adjust the density. Density page 6-12

Adjust the image quality precisely

Emphasize or blur the image

outline.

Example: Emphasize the image

outlines

Sharpness page 6-14

Adjust the difference between

dark and light parts of the image.

Contrast page 6-15

Darken or lighten the background

(the area with no texts or images)

of a document.

Example: Lightening the

background

Background Density page 6-15

Prevent bleed-through in 2-sided

originals.

Prevent Bleed-

through

page 6-16

Adjust the scanned image

Decrease the file size and

produce the characters clearly.

File format

[High Comp. PDF]

page 6-26

xv

> Guides Provided with the Machine

Guides Provided with the Machine

The following guides are provided with the machine. Refer to each guide as needed.

The contents of the guides are subject to change without notice for the purpose of improvement of machine

performance.

Printed guides

Start using the

machine quickly

Quick Guide

Explains how to use basic functions of the machine, how to use convenient features, how

to perform routine maintenance, and what to do when problems occur.

For safe use of the

machine

Safety Guide

Provides safety and cautionary information for installation environment and use of the

machine. Be sure to read this guide before using the machine.

Safety Guide (ECOSYS M3145dn/ECOSYS M3645dn)

Indicates the space required for machine installation, and describes the cautionary labels

and other safety information. Be sure to read this guide before using the machine.

xvi

> Guides Provided with the Machine

Guides (PDF) on the DVD (Product Library)

Install the following versions of Adobe Reader to view the manuals on the DVD.

Version 8.0 or later

Use the machine

thoughtfully

Operation Guide (This Guide)

Explains how to load paper and perform copy, print and scan operations, and indicates

default settings and other information.

Use the fax functions FAX Operation Guide

Explains how to use the fax function.

Use the ID card Card Authentication Kit (B) Operation Guide

Explains how to perform authentication using the ID card.

Strengthen security

Data Security Kit (E) Operation Guide

Explains how to introduce and use the Data Security kit (E), and how to overwrite and encrypt

data.

Easily register

machine information

and configure settings

Command Center RX User Guide

Explains how to access the machine from a Web browser on your computer to check and

change settings.

Print data from a

computer

Printer Driver User Guide

Explains how to install the printer driver and use the printer function.

Directly print a PDF file KYOCERA Net Direct Print Operation Guide

Explains how to print PDF files without launching Adobe Acrobat or Reader.

Monitor the machine

and printers on the

network

KYOCERA Net Viewer User Guide

Explains how to monitor your network printing system (the machine) with KYOCERA Net

Viewer.

Print without using the

printer driver

PRESCRIBE Commands Command Reference

Describes the native printer language (PRESCRIBE commands).

PRESCRIBE Commands Technical Reference

Describes the PRESCRIBE command functions and control for each type of emulation.

Adjust the print or

scan position

Maintenance Menu User Guide

Maintenance Menu provides the explanation on how to configure the print, scan, and other

settings.

xvii

> About the Operation Guide (this Guide)

About the Operation Guide (this Guide)

Structure of the guide

The Operation Guide contains the following chapters.

Chapter Contents

1Legal and Safety Information Provides precautions regarding use of the machine and trademark information.

2Installing and Setting up the

Machine

Explains part names, cable connections, installation of the software, login, logout, and

other matters related to administration of the machine.

3Preparation before Use Explains preparations and settings that are required in order to use the machine, such

as how to use the operation panel, load paper, and create an address book.

4Printing from PC Explains functions that are available when the machine is used as a printer.

5Operation on the Machine Explains the basic procedures for using the machine, such as placing originals, making

copies, sending documents, and using document boxes.

6Using Various Functions Explains convenient functions that are available on the machine.

7Status/Job Cancel Explains how to check the status of a job and the job history, and how to cancel jobs

being printed or waiting to print. Also explains how to check paper and toner levels, how

to check the device status, and how to cancel fax transmission.

8Setup and Registration (System

Menu)

Explains System Menu and how it relates to the operation of the machine.

9User Authentication and

Accounting (User Login, Job

Accounting)

Explains user login and job accounting.

10 Troubleshooting Explains what to do when toner runs out, an error is displayed, or a paper jam or other

problem occurs.

11 Appendix Describes convenient options that are available for the machine. Provides information

on media types and paper sizes, and gives a glossary of terms. Explains how to enter

characters, and lists the specifications of the machine.

xviii

> About the Operation Guide (this Guide)

Conventions Used in This Guide

Adobe Reader XI is used as an example in the explanations below.

Certain items are indicated in this guide by the conventions described below.

The items that appear in Adobe Reader vary depending on how it is used. If the Table of Contents or tools do not

appear, refer to Adobe Reader Help.

Convention Description

[Bold] Indicates keys and buttons.

«Regular» Indicates a message or setting.

xix

> About the Operation Guide (this Guide)

Conventions used in procedures for operating the machine

In this Operation Guide, continuous operation is as follows:

Actual procedure Procedure indicated in this guide

Select the [System Menu/Counter] key.



Select the [▲] or [] key to select [Common settings].



Select the [OK] key.

[System Menu/Counter] key > [▲] [] key >

[Common Settings] > [OK] key

xx

> Menu Map

Menu Map

This is a list of menus displayed on the message display. Depending on the settings, some menus may not be displayed.

Some menu names may differ from their reference titles.

Quiet Mode (page 6-23)

Paper Selection (page 6-10)

Collate (page 6-12)

ID Card Copy (page 6-9)

Duplex (page 6-20)

Zoom (page 6-16)

Combine (page 6-18)

Original Size (page 6-9)

Orig.Orientation (page 6-11)

Mixed Size Orig. (page 6-12)

Original Image (page 6-13)

Density (page 6-12)

EcoPrint (page 6-13)

Continuous Scan (page 6-22)

File Name Entry (page 6-22)

JobFinish Notice (page 6-22)

Print Override (page 6-23)

Sharpness (page 6-14)

Contrast (page 6-15)

Backgrnd Density (page 6-15)

Prevent Bleed-t (page 6-16)

Skip Blank Page (page 6-23)

xxi

> Menu Map

Me(E-mail) (page 5-22)

E-mail (page 5-16)

Folder(SMB) (page 5-17)

Folder(FTP) (page 5-17)

WSD Scan (page 5-26)

FAX Server (page 5-27)

FAX (Refer to FAX Operation Guide.)

Quiet Mode (page 6-23)

Color Selection (page 6-14)

Original Size (page 6-9)

Original Image (page 6-13)

Scan Resolution (page 6-30)

Sending Size (page 6-25)

Zoom (page 6-16)

Orig.Orientation (page 6-11)

Mixed Size Orig. (page 6-12)

Continuous Scan (page 6-22)

File Format (page 6-26)

File Name Entry (page 6-22)

Subject/Body (page 6-30)

Long Original (page 6-32)

JobFinish Notice (page 6-22)

FAX Resolution (Refer to FAX Operation Guide.)

FAX Delayed TX (Refer to FAX Operation Guide.)

FAX Direct TX (Refer to FAX Operation Guide.)

FAX RX Polling (Refer to FAX Operation Guide.)

FAX TX Report (Refer to FAX Operation Guide.)

Density (page 6-12)

Duplex (page 6-24)

FTP Encrypted TX (page 6-31)

File Separation (page 6-30)

Sharpness (page 6-14)

Contrast (page 6-15)

Backgrnd Density (page 6-15)

Prevent Bleed-t (page 6-16)

Skip Blank Page (page 6-23)

xxii

> Menu Map

Custom

Box

(File

Selection)

Print (ChangeSet) Quiet Mode (page 6-23)

Collate (page 6-12)

Paper Selection (page 6-10)

Duplex (page 6-20)

EcoPrint (page 6-13)

File Name Entry (page 6-22)

JobFinish Notice (page 6-22)

Print Override (page 6-23)

Del. After Print (page 6-31)

Sub Address Box (Refer to FAX Operation Guide.)

Polling Box (Refer to FAX Operation Guide.)

Job Box Private/Stored (page 4-13)

Quick/Proof (page 4-17)

USB

Memory

Store File Quiet Mode (page 6-23)

Color Selection (page 6-14)

Original Size (page 6-9)

Original Image (page 6-13)

Scan Resolution (page 6-30)

Storing Size (page 6-32)

Zoom (page 6-16)

Orig.Orientation (page 6-11)

Mixed Size Orig. (page 6-12)

Continuous Scan (page 6-22)

Long Original (page 6-32)

File Format (page 6-26)

File Separation (page 6-30)

File Name Entry (page 6-22)

JobFinish Notice (page 6-22)

Density (page 6-12)

Duplex (page 6-24)

Sharpness (page 6-14)

Contrast (page 6-15)

Backgrnd Density (page 6-15)

Prevent Bleed-t (page 6-16)

Skip Blank Page (page 6-23)

xxiii

> Menu Map

USB

Memory

(File

Selection)

Print Quiet Mode (page 6-23)

Collate (page 6-12)

Paper Selection (page 6-10)

Duplex (page 6-20)

EcoPrint (page 6-13)

File Name Entry (page 6-22)

JobFinish Notice (page 6-22)

Print Override (page 6-23)

Encrypted PDF (page 6-33)

JPEG/TIFF Print (page 6-33)

XPS FitTo Page (page 6-33)

Recall program. (page 5-5)

Print Job Status (page 7-4)

Send Job Status (page 7-5)

Store Job Status (page 7-6)

Scheduled Job (page 7-7)

Print Job Log (page 7-10)

Send Job Log (page 7-11)

Store Job Log (page 7-12)

FAX Job Log (Refer to FAX Operation Guide.)

Scanner (page 7-14)

Printer (page 7-14)

FAX (Refer to FAX Operation Guide.)

Toner Status (page 7-16)

Paper Status (page 7-16)

USB Memory (page 7-14)

SSD (page 7-14)

USB Keyboard (page 7-14)

Keyboard (page 7-14)

Network (page 7-14)

Wi-Fi (page 7-14)

Wi-Fi Direct (page 7-15)

Option Network (page 7-15)

xxiv

> Menu Map

Report Report Print Menu Map (page 8-5)

Status Page (page 8-5)

Font List (page 8-5)

Opt NW Status (page 8-5)

Data Sanitization (page 8-5)

Admin Rpt Set. (Refer to FAX Operation Guide.)

Result Rpt Set. (page 8-6)

Job Log History Auto Sending (page 8-6)

Send History (page 8-6)

Destination (page 8-6)

Subject (page 8-6)

SSFC Log Subject (page 8-6)

Personal Info. (page 8-6)

Counter (page 2-41)

xxv

> Menu Map

System/Network Network Setting Host Name (page 8-7)

Wi-Fi Direct Set Wi-Fi Direct (page 8-7)

Device Name (page 8-7)

IP Address (page 8-7)

Auto Disconnect (page 8-7)

Wi-Fi Settings Wi-Fi (page 8-8)

Setup (page 8-8)

TCP/IP Settings (page 8-10)

Restart Network (page 8-11)

Wired Netwk. Set TCP/IP Settings (page 8-11)

LAN Interface (page 8-11)

Bonjour (page 8-12)

IP Filter (IPv4) (page 8-12)

IP Filter (IPv6) (page 8-12)

IPSec (page 8-12)

Protocol Settings (page 8-16)

Secure Settings (page 8-7)

Ping (page 8-17)

Restart Network (page 8-17)

Optional Network Basic (page 8-17)

Wireless Network Setup (page 8-18)

Basic (page 8-17)

Primary Network (page 8-19)

I/F Block Set. USB Host (page 8-20)

USB Device (page 8-20)

USB Storage (page 8-20)

Option I/F (page 8-20)

Bluetooth Set. (page 8-20)

Security Level (page 8-20)

Data Security (page 8-21)

Restart (page 8-22)

Op Functions (page 8-22)

Software Version (page 8-22)

FAX Server Set. (page 8-22)

xxvi

> Menu Map

User/Job Account User Login Set. User Login (page 9-3)

Local User List (page 9-6)

Local Authoriz. (page 9-16)

Account Lockout (page 9-5)

ID Card Settings Key Login (page 9-22)

Additional Auth. (page 9-22)

Group Auth. (page 9-17)

Guest Auth. Set. (page 9-18)

PIN Login (page 9-18)

NW User Property (page 9-21)

Job Account.Set. Job Accounting (page 9-26)

AccountingAccess (page 9-27)

Account. Report (page 9-40)

Total Accounting (page 9-39)

Each Job Account (page 9-39)

Account. List (page 9-28)

Default Setting Apply Limit (page 9-37)

Copy/Print Count (page 9-37)

Counter Limit (page 9-38)

Unknown User Unknown ID Job (page 9-42)

User Property (page 9-43)

User Property (page 9-10)

Common Settings Language (page 8-24)

Default Screen (page 8-24)

Sound Buzzer (page 8-24)

FAX Speaker (Refer to FAX Operation Guide.)

FAX Monitor (Refer to FAX Operation Guide.)

Display Bright. (page 8-24)

Orig./Paper Set. Custom Orig.Size (page 8-25)

Detect Orig.(DP) (page 8-25)

Def. Orig. Size (page 8-25)

Custom PaperSize (page 8-26)

xxvii

> Menu Map

Common Settings Orig./Paper Set. Cassette 1 Set. Cassette 1 Size (page 8-28)

Cassette 1 Type (page 8-28)

Cassette 2 Set. Cassette 2 Size (page 8-28)

Cassette 2 Type (page 8-28)

Cassette 3 Set. Cassette 3 Size (page 8-28)

Cassette 3 Type (page 8-28)

Cassette 4 Set. Cassette 4 Size (page 8-28)

Cassette 4 Type (page 8-28)

Cassette 5 Set. Cassette 5 Size (page 8-28)

Cassette 5 Type (page 8-28)

MP Tray Set. MP Tray Size (page 8-28)

MP Tray Type (page 8-28)

Media Type Set. (page 8-27)

Media for Auto (page 8-27)

Def. PaperSource (page 8-27)

SpcialPaper Act. (page 8-27)

Paper Setup Msg (page 8-27)

Preset Limit (page 8-29)

Measurement (page 8-29)

Error Handling DuplexPaperError (page 8-30)

PaperMismatchErr (page 8-30)

Date Setting Date/Time (page 8-30)

Date Format (page 8-30)

Time Zone (page 8-30)

Summer Time (page 8-30)

Timer Setting Auto Panel Reset (page 8-31)

PanelReset Timer (page 8-31)

Low Power Timer (page 8-31)

Sleep Level (models except for Europe) (page 8-31)

Sleep Rules (models for Europe) (page 8-31)

Sleep Timer (page 8-31)

Weekly Timer Set. (page 8-32)

Power Off Rule (page 8-32)

Power Off Timer (page 8-32)

Auto Err. Clear (page 8-32)

Err. Clear Timer (page 8-32)

Unusable Time (Refer to FAX Operation Guide.)

Ping Timeout (page 8-32)

xxviii

> Menu Map

Common Settings Function Default Color Selection (page 8-33)

Scan Resolution (page 8-33)

FAX Resolution (Refer to FAX Operation Guide.)

Orig.Image(Copy) (page 8-33)

Orig.Image(Send) (page 8-33)

Zoom (page 8-33)

Collate (page 8-33)

Orig.Orientation (page 8-33)

Backgrnd(Copy) (page 8-33)

Backgrnd(Send) (page 8-33)

EcoPrint (page 8-33)

Prevent B-t Copy (page 8-33)

Prevent B-t Send (page 8-33)

Skip Blank(Copy) (page 8-33)

Skip Blank(Send) (page 8-33)

File Name Entry (page 8-33)

Subject/Body (page 8-34)

Con.scan-Copy (page 8-34)

Con.scan-FAX (page 8-34)

Con.scan-Others (page 8-34)

File Format (page 8-34)

File Separation (page 8-34)

JPEG/TIFF Print (page 8-34)

XPS FitTo Page (page 8-34)

Detail Setting 2 in 1 Layout (page 8-34)

4 in 1 Layout (page 8-34)

Border Line (page 8-34)

Orig. Binding (page 8-34)

Finish. Binding (page 8-34)

Image Quality (page 8-34)

Color TIFF Comp. (page 8-34)

PDF/A (page 8-34)

High Comp.PDF (page 8-34)

Items To Skip Copy

(page 8-34)

Items To Skip Send

(page 8-34)

Login Operation (page 8-35)

RAM Disk Mode (page 8-35)

xxix

> Menu Map

Common Settings Optional Memory (page 8-35)

Disp. Status/Log (page 8-36)

Keyboard Type (page 8-36)

Low Toner Alert (page 8-36)

Show PowerOffMsg (page 8-36)

EnergySaver Set. (page 8-37)

Msg Banner Print (page 8-37)

Copy Paper Selection (page 8-38)

AutoPaperSelect. (page 8-38)

Auto % Priority (page 8-38)

Reserve Priority (page 8-38)

Select Key Set. (page 8-38)

Printer Emulation Set. (page 8-39)

EcoPrint (page 8-39)

Override A4/LTR (page 8-39)

Duplex (page 8-39)

Copies (page 8-39)

Orientation (page 8-39)

Wide A4 (page 8-39)

FormFeed TimeOut (page 8-39)

LF Action (page 8-39)

CR Action (page 8-39)

Job Name (page 8-40)

User Name (page 8-40)

MP Tray Priority (page 8-40)

Paper Feed Mode (page 8-40)

Auto Cass. Change (page 8-40)

Resolution (page 8-40)

KIR (page 8-40)

Job Terminator (page 8-40)

Send Select Key Set. (page 8-41)

DestinationCheck (page 8-41)

New Dest. Entry (page 8-41)

Recall Dest. (page 8-41)

Broadcast (page 8-41)

Default Screen (page 8-41)

Send and Forward (page 8-41)

FAX (Refer to FAX Operation Guide.)

xxx

> Menu Map

Document Box Custom Box (page 5-33)

Sub Address Box (Refer to FAX Operation Guide.)

Job Box Quick Copy Jobs (page 8-42)

JobRet. Deletion (page 8-42)

Storage Media (page 8-42)

Polling Box (Refer to FAX Operation Guide.)

Select Key Set. (page 8-38)

Edit Destination Address Book (page 8-43)

Edit Restriction (page 8-43)

Print List (page 8-43)

AddrBookDefaults (page 8-43)

Adjust/Maint. Quiet Mode (page 8-44)

Copy Denst. Adj. (page 8-44)

Send/Box Density (page 8-44)

Contrast (Copy) (page 8-44)

Contrast (Send) (page 8-44)

Backgrnd Density (page 8-44)

EcoPrint Setting (page 8-44)

Print Density (page 8-44)

AutoColorCorrect (page 8-44)

Correct. Bk Line (page 8-45)

Service Setting (page 8-45)

1-1

1 Legal and Safety

Information

Please read this information before using your machine. This chapter provides information on the following topics.

Notice ………..…………….…………….…………….………….…………….……………..……………………………..…………….….. 1-2

Safety Conventions in This Guide ……………………….……………….………………..……………….……..…..…….. 1-2

Environment ….…………….…………….…………….…………….……………..…………….…………..…………………….. 1-3

Precautions for Use …………………………….…………….…………….…………….…………….……………………….... 1-4

Laser Safety (Europe) ……..………………..…………………….……………..…………….…………….…………………... 1-5

SAFETY OF LASER BEAM (USA) ….…………….……………..…………………………………………………………… 1-6

Safety Instructions Regarding the Disconnection of Power ………….……………….……………….……………… 1-7

Compliance and Conformity ……..…………….…………….…………….…………….……………..……………………... 1-7

Other precautions (for users in California, the United States) ………….…………….…………….…………….….. 1-7

Warranty (the United States and Canada) ……………….………………..……………….……………….……….…….. 1-8

Legal Restriction on Copying/Scanning …….………….…………….…………….…………….…………….…..………. 1-9

EN ISO 7779 …………….…………….…………………………..………………………………………………….………….….. 1-9

EK1-ITB 2000 …….…………….……………..…………….………….…………….…………….………….…………………... 1-9

Wireless Connection (Mexico only) …….……………….…………….……………….………………..…………….…….. 1-9

Security Precautions when Using Wireless LAN (If equipped) ………..……………….……………….…………… 1-9

Limited Use of This Product (If equipped) ………………….………………..……………….……………….…..…….. 1-10

Legal Information ………………………….…………….……………..………….…………….…………………….………….. 1-11

Energy Saving Control Function ……..………………..……………….……………….………………..……….………… 1-17

Automatic 2-Sided Print Function …………….……………….………………..……………….………………..………… 1-17

Resource Saving — Paper ……………….………….…….…………….…………….…………….…………….…….……… 1-17

Environmental benefits of «Power Management» …………………………..……………….……………….…………. 1-17

Energy Star (ENERGY STAR®) Program …………..……………….……………….………………..……………….... 1-18

1-2

Legal and Safety Information > Notice

Notice

Safety Conventions in This Guide

The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect the user,

other individuals and surrounding objects, and ensure correct and safe usage of the machine. The symbols and their

meanings are indicated below.

WARNING: Indicates that serious injury or even death may result from insufficient

attention to or incorrect compliance with the related points.

CAUTION: Indicates that personal injury or mechanical damage may result from

insufficient attention to or incorrect compliance with the related points.

Symbols

The  symbol indicates that the related section includes safety warnings. Specific points of attention are indicated

inside the symbol.

… [General warning]

… [Warning of high temperature]

The symbol indicates that the related section includes information on prohibited actions. Specifics of the prohibited

action are indicated inside the symbol.

… [Warning of prohibited action]

… [Disassembly prohibited]

The  symbol indicates that the related section includes information on actions which must be performed. Specifics of

the required action are indicated inside the symbol.

… [Alert of required action]

… [Remove the power plug from the outlet]

… [Always connect the machine to an outlet with a ground connection]

Please contact your service representative to order a replacement if the safety warnings in this Operation Guide are

illegible or if the guide itself is missing (fee required).

An original which resembles a bank note closely may not be copied properly in some rare cases because this

machine is equipped with a counterfeiting prevention function.

1-3

Legal and Safety Information > Notice

Environment

The service environmental conditions are as follows:

Avoid the following locations when selecting a site for the machine.

• Avoid locations near a window or with exposure to direct sunlight.

• Avoid locations with vibrations.

• Avoid locations with drastic temperature fluctuations.

• Avoid locations with direct exposure to hot or cold air.

• Avoid poorly ventilated locations.

If the floor is delicate against casters, when this machine is moved after installation, the floor material may be damaged.

During copying, some ozone is released, but the amount does not cause any ill effect to one’s health. If, however, the

machine is used over a long period of time in a poorly ventilated room or when making an extremely large number of

copies, the smell may become unpleasant. To maintain the appropriate environment for copy work, it is suggested that

the room be properly ventilated.

Temperature 50 to 90.5 °F (10 to 32.5 °C)

Humidity 15 to 80%

1-4

Legal and Safety Information > Notice

Precautions for Use

Cautions when handling consumables

CAUTION

Do not attempt to incinerate parts which contain toner. Dangerous sparks may cause burns.

Keep parts which contain toner out of the reach of children.

If toner happens to spill from parts which contain toner, avoid inhalation and ingestion, as well as contact with your eyes

and skin.

• If you do happen to inhale toner, move to a place with fresh air and gargle thoroughly with a large amount of water. If

coughing develops, contact a physician.

• If you do happen to ingest toner, rinse your mouth with water and drink 1 or 2 cups of water to dilute the contents of

your stomach. If necessary, contact a physician.

• If you do happen to get toner in your eyes, flush them thoroughly with water. If there is any remaining tenderness,

contact a physician.

• If toner does happen to get on your skin, wash with soap and water.

Do not attempt to force open or destroy parts which contain toner.

Other precautions

Return the exhausted toner container and waste toner box to your dealer or service representative. The collected toner

container and waste toner box will be recycled or disposed in accordance with the relevant regulations.

Store the machine while avoiding exposure to direct sunlight.

Store the machine in a place where the temperature stays below 40 °C while avoiding sharp changes of temperature

and humidity.

If the machine will not be used for an extended period of time, remove the paper from the cassette and the Multi Purpose

(MP) Tray, return it to its original package and reseal it.

1-5

Legal and Safety Information > Notice

Laser Safety (Europe)

Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this machine is

hermetically sealed within the protective housing and external cover. In the normal operation of the product by user, no

radiation can leak from the machine.

This machine is classified as Class 1 laser product under IEC/EN 60825-1:2014.

Regarding CLASS 1 laser products, information is provided on the rating label.

1-6

Legal and Safety Information > Notice

SAFETY OF LASER BEAM (USA)

1. Safety of laser beam

This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards

established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is

safe to use during normal operation and maintenance. The laser optical system, enclosed in a protective housing and

sealed within the external covers, never permits the laser beam to escape.

2. The CDRH Act

A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and Radiological Health

(CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in the U.S. without

certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown below indicates

compliance with the CDRH regulations and must be attached to laser products marketed in the United States. On this

machine, the label is on the rear.

3. Maintenance

For safety of the service personnel, follow the maintenance instructions in the other section of this manual.

4. Safety switch

The power to the laser unit is cut off when the front cover is opened.

1-7

Legal and Safety Information > Notice

Safety Instructions Regarding the Disconnection of

Power

Caution: The power plug is the main isolation device! Other switches on the equipment are only functional switches and

are not suitable for isolating the equipment from the power source.

Attention: Le débranchement de la fiche secteur est le seul moyen de mettre l’appareil hors tension. Les interrupteurs

sur l’appareil ne sont que des interrupteurs de fonctionnement: ils ne mettent pas l’appareil hors tension.

Compliance and Conformity

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• The use of a non-shielded interface cable with the referenced device is prohibited.

CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all

persons and must not be co-located or operating in conjunction with any other transmitter.

* The above statements are valid only in the United States of America and Canada.

NOTE — Use shielded interface cables.

Other precautions

(for users in California, the United States)

Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Hereby, KYOCERA Document Solutions Inc. declares that the radio equipment type ECOSYS M3145dn/

ECOSYS M3645dn are in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

https://www.kyoceradocumentsolutions.eu/index/service/dlc.html

Module name Software Ver. Frequency band in

which the radio

equipment operates:

Maximum radio-frequency power transmitted in the

frequency band in which the radio equipment

operates:

IB-51 (Option) 2.2.6 2.4GHz 100mW

IB-36 (Option) 2014.12 2.4GHz 100mW

1-8

Legal and Safety Information > Notice

Warranty (the United States and Canada)

KYOCERA Document Solutions Canada, Ltd.

6120 Kestrel Rd., Mississauga, ON L5T 1S8,

Canada

KYOCERA Document Solutions America, Inc.

225 Sand Road, P.O. Box 40008

Fairfield, New Jersey 07004-0008, USA

1-9

Legal and Safety Information > Notice

Legal Restriction on Copying/Scanning

It may be prohibited to copy/scan copyrighted material without permission of the copyright owner.

Copying/Scanning the following items is prohibited and may be penalized by low. It may not be limited to these items. Do

not knowingly copy/scan the items that are not to be copied/scanned.

• Paper money

• Bank note

• Securities

•Stamp

• Passport

• Certificate

Local laws and regulations may prohibit or restrict copying/scanning of other items not mentioned above.

EN ISO 7779

Maschinenlärminformations-Verordnung 3. GPSGV, 06.01.2004: Der höchste Schalldruckpegel beträgt 70 dB (A) oder

weniger gemäß EN ISO 7779.

EK1-ITB 2000

Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um

störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren Gesichtsfeld

platziert werden.

Wireless Connection (Mexico only)

The operation of this equipment is subject to the following two conditions:

(1) it is possible that this equipment or device may not cause harmful interference, and (2) this equipment or device must

accept any interference, including interference that may cause undesired operation.

La operación de este equipo está sujeta a las siguientes dos condiciones:

(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe

aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

Security Precautions when Using Wireless LAN

(If equipped)

Wireless LAN allows information to be exchanged between wireless access points instead of using a network cable,

which offers the advantage that a LAN connection can be established freely within an area in which radio waves can be

transmitted.

On the other hand, the following problems may occur if security settings are not configured, because radio waves can

pass through obstacles (including walls) and reach everywhere within a certain area.

Secretly Viewing Communication Contents

A third person with malicious objectives may intentionally monitor radio waves and gain unauthorized access to the

following communication contents.

• Personal information including ID, passwords, and credit card numbers

• Contents of email messages

1-10

Legal and Safety Information > Notice

Illegal Intrusion

A third party with malicious intent may gain unauthorized access to personal or company networks and conduct the

following illegal actions.

• Extracting personal and confidential information (information leak)

• Entering into communication while impersonating a specific person and distributing unauthorized information (spoofing)

• Modifying and retransmitting intercepted communications (falsification)

• Transmitting computer viruses and destroying data and systems (destruction)

Wireless LAN cards and wireless access points contain built-in security mechanisms to address these problems and to

reduce the possibility of these problems occurring by configuring the security settings of wireless LAN products when

the product is used.

We recommend that customers take responsibility and use their judgment when configuring the security settings and

that they ensure that they fully understand the problems that can occur when the product is used without configuring the

security settings.

Limited Use of This Product (If equipped)

• Radio waves transmitted from this product may affect medical equipment. When using this product in a medical

institution or in the vicinity of medical instruments, either use this product according to the instructions and

precautions provided by the administrator of the institution or those provided on the medical instruments.

• Radio waves transmitted from this product may affect automatic control equipment including automatic doors and fire

alarms. When using this product in the vicinity of the automatic control equipment, use this product according to the

instructions and precautions provided on the automatic control equipment.

• If this product is used in devices that are directly related to service including airplanes, trains, ships, and automobiles

or this product is used in applications requiring high reliability and safety to function and in devices requiring accuracy

including those used in disaster prevention and crime prevention and those used for various safety purposes, please

use this product after considering the safety design of the entire system including adoption of a failsafe design and

redundancy design for reliability and safety maintenance of the entire system. This product is not intended for use in

applications requiring high reliability and safety including aerospace instruments, trunk communication equipment,

nuclear power control equipment, and medical equipment; hence, the decision as to whether to use this product in

these applications needs to be fully considered and determined.

Sólo México (Mexico only)

Este equipo utiliza el módulo de interfaz de red inalámbrica modelo LBWA1ZZ1CA para conectarse a las redes

Inalámbricas.

1-11

Legal and Safety Information > Notice

Legal Information

Copying or other reproduction of all or part of this guide without the prior written consent of KYOCERA Document

Solutions Inc. is prohibited.

Regarding Trade Names

• PRESCRIBE and ECOSYS are registered trademark of Kyocera Corporation.

• KPDL is a trademark of Kyocera Corporation.

• Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks or trademarks of

Microsoft Corporation in the U.S.A. and/or other countries.

• PCL is a trademark of Hewlett-Packard Company.

• Adobe Acrobat, Adobe Reader and PostScript are trademarks of Adobe Systems, Incorporated.

• Ethernet is a registered trademark of Xerox Corporation.

• IBM and IBM PC/AT are trademarks of International Business Machines Corporation.

• AppleTalk, Bonjour, Macintosh, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

• All European language fonts installed in this machine are used under licensing agreement with Monotype Imaging

Inc.

• Helvetica, Palatino and Times are registered trademarks of Linotype GmbH.

• ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC ZapfDingbats are registered trademarks of

International Typeface Corporation.

• ThinPrint is a trademark of Cortado AG in Germany and other countries.

• UFST™ MicroType® fonts by Monotype Imaging Inc. are installed in this machine.

• This machine contains the software having modules developed by Independent JPEG Group.

• iPad, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

• AirPrint and the AirPrint logo are trademarks of Apple Inc.

• iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license by

Apple Inc.

• Google and Google Cloud Print™ are trademarks and/or registered trademarks of Google Inc.

• Mopria™ is registered trademarks of Mopria™ Alliance.

• Wi-Fi and Wi-Fi Direct are trademarks and/or registered trademarks of Wi-Fi Alliance.

• Powered by ABBYY FineReader

ABBYY and FineReader are trademarks of ABBYY Software Ltd.

All other brands and product names are registered trademarks or trademarks of their respective companies. The

designations ™ and ® will not be used in this Operation Guide.

1-12

Legal and Safety Information > Notice

GPL/LGPL

This product contains GPL (http://www.gnu.org/licenses/gpl.html) and/or LGPL (http://www.gnu.org/licenses/lgpl.html)

software as part of its firmware. You can get the source code, and you are permitted to copy, redistribute and modify it

under the terms of GPL/LGPL. For further information including availability of the source code, visit

http://www.kyoceradocumentsolutions.com/gpl/.

OpenSSL License

Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following

conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following

disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following

disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment:

«This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.

(http://www.openssl.org/)»

4. The names «OpenSSL Toolkit» and «OpenSSL Project» must not be used to endorse or promote products derived

from this software without prior written permission.

For written permission, please contact openssl-core@openssl.org.

5. Products derived from this software may not be called «OpenSSL» nor may «OpenSSL» appear in their names without

prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: «This product includes software

developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)»

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT «AS IS» AND ANY EXPRESSED OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR

ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.

This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so

as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The

following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the

SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the

holder is Tim Hudson (tjh@cryptsoft.com).

Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the

package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following

conditions are met:

1-13

Legal and Safety Information > Notice

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following

disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

«This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)»

The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related :-).

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must

include an acknowledgement: «This product includes software written by Tim Hudson (tjh@cryptsoft.com)»

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG «AS IS» AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e.

this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Monotype Imaging License Agreement

1Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as

well as the UFST Software.

2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and

versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or

personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of

this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the

fonts on more than three printers, you need to acquire a multiuser license agreement which can be obtained from

Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights

are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.

3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary

information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access

to and use of the Software and Typefaces.

4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You

agree that any such copy shall contain the same proprietary notices as those appearing on the original.

5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License

may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not

remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you

shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as

requested.

6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.

7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with

Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship.

Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.

The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular

purpose and merchantability, are excluded.

8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is

repair or replacement of defective parts, upon their return to Monotype Imaging.

In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential

damages, or any damages caused by abuse or misapplication of the Software and Typefaces.

9Massachusetts U.S.A. law governs this Agreement.

1-14

Legal and Safety Information > Notice

10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written

consent of Monotype Imaging.

11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data

and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate.

Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in

FAR 52.227-19 (c)(2).

12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and

conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No

change in this Agreement is effective unless written and signed by properly authorized representatives of each party.

By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

Knopflerfish License

This product includes software developed by the Knopflerfish Project.

http://www.knopflerfish.org

Copyright 2003-2010 The Knopflerfish Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following

conditions are met:

— Redistributions of source code must retain the above copyright notice, this list of conditions and the following

disclaimer.

— Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following

disclaimer in the documentation and/or other materials provided with the distribution.

— Neither the name of the KNOPFLERFISH project nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS «AS IS» AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Apache License (Version 2.0)

Apache License

Version 2.0, January 2004

http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

«License» shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1

through 9 of this document.

«Licensor» shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

«Legal Entity» shall mean the union of the acting entity and all other entities that control, are controlled by, or are

under common control with that entity. For the purposes of this definition, «control» means (i) the power, direct or

indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of

fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

«You» (or «Your») shall mean an individual or Legal Entity exercising permissions granted by this License.

«Source» form shall mean the preferred form for making modifications, including but not limited to software source

code, documentation source, and configuration files.

1-15

Legal and Safety Information > Notice

«Object» form shall mean any form resulting from mechanical transformation or translation of a Source form, including

but not limited to compiled object code, generated documentation, and conversions to other media types.

«Work» shall mean the work of authorship, whether in Source or Object form, made available under the License, as

indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix

below).

«Derivative Works» shall mean any work, whether in Source or Object form, that is based on (or derived from) the

Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an

original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain

separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

«Contribution» shall mean any work of authorship, including the original version of the Work and any modifications or

additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work

by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For

the purposes of this definition, «submitted» means any form of electronic, verbal, or written communication sent to the

Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code

control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of

discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise

designated in writing by the copyright owner as «Not a Contribution.»

«Contributor» shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been

received by Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to

You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce,

prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such

Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a

perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent

license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license

applies only to those patent claims licensable by such Contributor that are necessarily infringed by their

Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was

submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit)

alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent

infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date

such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with

or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a)You must give any other recipients of the Work or Derivative Works a copy of this License; and

(b)You must cause any modified files to carry prominent notices stating that You changed the files; and

(c)You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark,

and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of

the Derivative Works; and

(d)If the Work includes a «NOTICE» text file as part of its distribution, then any Derivative Works that You distribute

must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices

that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text

file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the

Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices

normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the

License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an

addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be

construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license

terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as

a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated

in this License.

1-16

Legal and Safety Information > Notice

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for

inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any

additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any

separate license agreement you may have executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product

names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and

reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and

each Contributor provides its Contributions) on an «AS IS» BASIS, WITHOUT WARRANTIES OR CONDITIONS OF

ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-