Руководство casio 5600

Casio DW-5600 / линейка G-Shock / модуль 1545 / год 1996

Инструкция к модулю Casio 1545

• Смотреть онлайн → (без скачивания, удобно на мобильных и планшетах);
• Скачать русскую инструкцию →  (типичная “как у всех”, не всегда понятные картинки);
• Скачать английскую инструкцию → (детальная, много фото, более понятная).

Сложно настроить? Спрашивай на форуме G-Shock →

Читайте новости о любимых часах DW-5600 на блоге
[display-posts tag=”DW-5600″ posts_per_page=”4″]

Все новости о DW-5600 →

Побывайте на заводе Casio, следите за новинками G-Shock…

 

Перейти к контенту

Русские электронные инструкции по эксплуатации

Постоянно обновляемый большой каталог документации по эксплуатации и использованию современных устройств и оборудования на русском языке. Бесплатное скачивание файлов.

Поиск:

MO0803-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully.

• The measurement functions built into this watch are not intended for use in taking

measurements that require professional or industrial precision. Values produced

by this watch should be considered as reasonably accurate representations only.

• The longitude, lunitidal interval, Moon phase indicator and tide graph data that

appear on the display of this watch are not intended for navigation purposes.

Always use proper instruments and resources to obtain data for navigation

purposes.

• This watch is not an instrument for calculating low tide and high tide times. The

tide graph of this watch is intended to provide a reasonable approximation of tidal

movements only.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any

claims by third parties that may arise through the use of this watch.

General Guide

• Press C to change from mode to mode.

• In any mode (except when a setting screen is on the display), press B to illuminate

the display.

Timekeeping

Moon phase indicator

Day of week

Tide graph

PM indicator

Month – Day

Hour : Minutes Seconds

Setting the Time and Date

This watch is preset with UTC differential values that represent each time zone

around the globe. Before setting the time, be sure to set the UTC differential for your

Home Site first, which is the location where you normally will be using the watch.

• Note that World Time Mode times are all displayed based on the time and date

settings you configure in the Timekeeping Mode.

To set the time and date

Seconds

2. Press C to move the flashing in the sequence shown below to select other

settings.

Seconds

Flash Alert

3. When the setting you want to change is flashing, use D and B to change it as

described below.

Screen

To do this:

Reset the seconds to 00

Toggle between Daylight Saving

Time (

(

OFF

Specify the UTC differential

Change the hour or minutes

Change the year, month or day

• See «Daylight Saving Time (DST) Setting» below for details about the DST setting.

• The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.

• When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in

0.5-hour units.

• For information about Flash Alert, see «Flash Alert».

4. Press A twice to exit the setting screen.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Operation Guide 3151

Warning!

Timekeeping Mode

Use the Timekeeping Mode to set and view the current

time and date.

• The tide graph shows tidal movements for the current

date in accordance with the current time as kept in the

Timekeeping Mode.

• The Moon phase indicator shows the current Moon

phase in accordance with the current date as kept in the

Timekeeping Mode.

Important!

• Be sure to configure the current time and date, and your

Home Site data (data for the site where you use the

watch) correctly before using the functions of this watch.

See «Home Site Data» for more information.

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

• Be sure to configure the correct UTC differential for

your Home Site before configuring any other

Timekeeping Mode settings.

• See the «UTC Differential/City Code List» for information

about the UTC differential settings that are supported.

UTC

DST

Hour

Minutes

Differential

Day

Month

Year

Do this:

Press D.

Press D.

) and Standard Time

ON

)

Use D (+) and B (–).

Use D (+) and B (–).

Use D (+) and B (–).

About This Manual

Tide/Moon Data Mode

Press C.

Alarm Mode

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-

hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

On/Off status

l

l

DST indicator

Home Site Data

Moon phase, tide graph data, and Tide/Moon Data Mode data will not be displayed

properly unless Home Site data (UTC differential, longitude and lunitidal interval) is

configured correctly.

• The UTC differential indicates the time differential with Greenwich, England.

• The letters UTC is the abbreviation for Coordinated Universal Time, which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap

seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s

rotation.

• The lunitidal interval is the time elapsing between the Moon’s transit over a meridian

and the next high tide at that meridian. See «Lunitidal Interval» for more information.

• This watch displays lunitidal intervals in terms of hours and minutes.

• The «Site/Lunitidal Interval Data List» provides UTC differential and longitude

information around the world.

• The following is the initial factory default Home Site data (Tokyo, Japan) when you

first purchase the watch and whenever you have the battery replaced. Change these

settings to match the area where you normally use the watch.

UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours,

20 minutes)

To configure Home Site data

Longitude (East/West)

Longitude value

Longitude

Value

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the «Reference» section.

World Time Mode

Countdown Timer Mode

Stopwatch Mode

1.In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C once and the DST setting screen appears.

3. Press D to toggle between Daylight Saving Time (

displayed) and Standard Time (

displayed).

OFF

4. Press A twice to exit the setting screen.

• The DST indicator appears on the Timekeeping, and

Tide/Moon Data screens to indicate that Daylight Saving

Time is turned on. In the case of the Tide/Moon Data

Mode, the DST indicator appears on the Tide Data

screen only.

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C twice to display the UTC differential setting

screen, and confirm that the setting is correct.

• If the UTC differential setting is not correct, use D (+)

and B (–) to change it.

3. Press A to display the longitude value setting screen.

4. Press C to move the flashing in the sequence shown

below to select other settings.

Longitude

Lunitidal Interval

Lunitidal Interval

(East/West)

Hours

Minutes

ON

1

Руководство пользователя

Модуль ¹ 1545

DW-056/5000/50025/5600

Информация о товаре

Наименование:

часы наручные электронные / электронно-механические кварцевые

(муж./жен.)

Торговая марка: CASIO

Фирма изготовитель:

CASIO COMPUTER Co.,Ltd.

(КАСИО Компьютер Ко. Лимитед)

Адрес изготовителя: 6-2,

Hon-machi

1-chome,

Shibuya-ku,Tokyo 151-8543, Japan

Импортер:

ООО «Касио», 127055, Москва, ул. Сущевская, д.27, стр. 1, Россия

Страна-изготовитель:

Гарантийный срок: 1

год

Адрес уполномоченной

организации для принятия

претензий:

указан в гарантийном талоне

Продукция соответствует ГОСТ 26270-98 (п.4.35)
Сертификат соответствия № РОСС JP. АЯ 46.Д00003