Ruida 6445g руководство

Контроллер лазерного станка Ruida RDC6445 может работать с газовыми и оптоволоконными станками. Наибольшее распространение он получил именно, работая в составе лазерных станков CO2, как наиболее стабильный и удобный в повседневной работе. 

Контроллер Ruida (руида) имеет множество функций и возможностей, которые описаны в инструкции по его подключению. Обычно, потребитель получает минимальное использование возможностей, которые позволяют выполнять основные функции станка без дополнений, это связано с конкуренцией на рынке и желание покупателя серьезно экономить.  Поставщики станков и китайские заводы видя эту тенденцию отвечают запросу рынка, но это не должно останавливать эксплуатанта развивать функциональность станка автоматизируя рабочие процессы уже на своем рабочем месте. 

Что можно автоматизировать:

• Работу компрессора
• Светофор световую индикацию работы
• Работы с вытяжкой
• Работа в координатой Z (подъем и опускания стола)
• Работа с подачей или эвакуацией материала

Функции

• Контроль работы концевых датчиков
• Настройку IP адреса для сетевого подключения

И тд

Прочитав инструкцию по контроллеру лазерного станка Ruida RDC6445 на русском, вы подчеркнете много нового и найдете интересные идеи и мысли сделать работу станка более эффективной. 

• ADTRAN Total Access 300 Series
  

  jobAid 1DESCRIPTIONThe Total Access® 300 Series Small Business Unit (SBU) Optical Network Terminals (ONT) are Gigabit Passive Optical Network ONTs. This Job Aid describes the installation of the following ONTs: Total Access 372 Small Business Unit ONT, P/N 1287722G1 Total Access 372R (2nd Generation) Small Busin …

  Total Access 300 Series Network Hardware, 4

• Penn System 450 Series
  

  System 450 Series C450CCU Condensing UnitControl Module Installation GuideDescriptionThe System 450™ Series condensing unit control modulecontrols space temperature, scheduled defrost cycles,evaporator fans, and optional pump down compressorcontrol on medium and low temperature refrigerationcondensing units.You can u …

  System 450 Series Control Systems, 6

• Penn A421 Series
  

  A421 Series Electronic Temperature Controlswith Off-Cycle Defrost Installation GuideApplicationsImportant: Use this A421 Series ElectronicTemperature Control only as an operating control.Where failure or malfunction of the A421 Controlcould lead to personal injury or property damageto the controlled equipment or other …

  A421 Series Control Systems, 16

• Eaton COOPER POWER SERIES
  

  RVAC, SF6-insulated, vacuum break switch; installation, operation, and maintenance instructionsCOOPER POWERSERIESPad-mounted Switchgear MN285003ENEffective September 2015Supersedes S285-50-2 June 2003 …

  COOPER POWER SERIES Switch, 12

• Siemens SINUMERIK 840D sl
  

  SINUMERIKSINUMERIK 840D sl / 828DFundamentalsProgramming ManualValidforControlsystemSINUMERIK840Dsl/840DEslSINUMERIK828DSoftware  VersionCNC-Software 4.409/20116FC5398-1BP40-2BA0PrefaceFundamental Geometrical Principles1Fundamental Principles of NC Program …

  SINUMERIK 840D sl Control Systems, 596

• Dollken Cubica Light System
  

  Cubica Light SystemSteuerungsset/ control setBedienungs-anleitung/ InstructionmanualZur Montage benötigen Sie/For the installation you need:Schrauben-dreher/ screwdriver000RoHSBatterien und Akkus dürfen nicht im Hausmüll entsorgt werden.Batteries and accumulators must not be disposed of in the household waste.Döllk …

  Cubica Light System Control Systems, 2

• Evco EV3 MVC Series
  

  EVCO S.p.A. EV3 MVC & EVD MVC | Application manual ver. 2.2c | Code 1443DMVCI224 page 1 of 74 EV3 MVC & EVD MVC Controllers for mechanical ventilation units for air renewal and heat recovery Application manual ver. 2.2c November 2019 | ENGLISH Code 144EV3MVI224 …

  EV3 MVC Series Controller, 74

• 52, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 45 Press the direction key to select a parameter, then press the number key to modify the parameter. After the modification, move the «selection block» to the «Write» entry and press the <Enter> key. The parameter setting takes effect. Press the <Esc> key to return to the menu at the previous menu. 8.6.5 System Info Select the «System Info» entry under the controller setti…

• 6, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY Contents Chapter 1 Overview …………………………………………………………………………………………………………………….. 1 1.1 Briefing …………………………………………………………………………………………………………………………….. 2 1.2 Description of Controller Model ……………………………………………………………..…

• 71, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 64 Mode 1: The D-axis directly drives the laser head to move upward until the laser head touches the limit switch placed at the top. At this time, the controller considers the position to be the origin position of the D-axis, and then the D-axis moves in the opposite direction. A certain distance, which is the maximum stroke of the D axis (the distance from the …

• 72, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 65 Thank you for your selection of our production! All the copyright of this manual is owned by Ruida technology. Any person or company can not copy upload and send the manual without Ruida’s permission. Content will be revised or modified. We will not send message to every users. If there are any question or suggestion about our products and manuals, please tells us. Tel…

• 14, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 7 Section 3 Object Pictures and Interfaces CONTENTS: Object Pictures of MainBoard Object Pictures of Panel Electric connection Lamp instruction
  …

• 2, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY COPYRIGHT All rights reserved.You may not reproduce, transmit, store in a retrieval system or adapt thispublication, in any form or by any means, without the prior written permissionof RuiDa, except as allowed under applicable copyright laws. We have identifiedwords that we consider as trademarks. Neither the presence or absence oftrademark identifications affects t…

• 11, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 4 Run progress bar display NO NO NO YES Modifi cation Factory/Use r’s para on display NO YES YES NO Display type 128*64, dot display 320*240 TFT display 320*240 TFT display 320*480 TFT display Motion-axl e Feature Soft Spacing YES YES YES YES Hard Spacing NO YES YES YES Z-axle Linkage NO YES YES YES Feeding Feature Single direction Single/double d…

• 63, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 56 Section 9 Manufacturer/User Parameters Explanation CONTENTS: Manufacturer parameters User parameters
  …

• 5, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY Sign in、Devanning、Examine cargo The product itself with plastic or metal shell, can protect the external electrical components from damage. The products are packed in foam bags and anti-static bags. If there is any external damage to the package, check the equipment and notify the carrier and carrier in writing of the damage. Inportant: After receiving the product, please check…

• 28, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 21 5.2 Examples of Glass tube Laser Power
  …

• 7, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 8.5.1 User parameters ………………………………………………………………………………………………………… 36 8.5.2 Vender parameters ……………………………………………………………………………………………………. 39 8.5.3 Origin Setting ………………………………………………………………………………………………..…

• 21, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 14 4.1 Interface of Main Power Source CN0 4.2 Panel Signal-Cable Interface HMI The panel signal-cable is a pin-to-pin cable, which is included in the factory shipper bill. 4.3 Udisk Interface Udisk is a USB-AM interface. The controller may visit the u-disk by this interface. 4.4 PC-USB Interface PC-USB is a USB-BM interface. The controller may communicate with PC by this port. 4.5 Ethernet…

• 42, Ruida Technology RDC6445G RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 35 And then “Up and down” Keys can be pushed to select the intent layer, on that time, user can push <Enter> key to check the selected layer’s parameters, show as below: At this point, the «blue selection block» stays on the layer number entry, and then press the <Enter> key to enter the selection layer mode, while the «blue selection block» becomes , press the «up/down» ke…

• 13, Ruida Technology RDC6445G RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 6 2.1 Installation Size of MainBoard The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm (the four holes are symmetrical) 2.2 Size of Panel The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm. Figure Figure
  …

• 70, RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 63 idle (The lasering power on the 4-corner dotting means the well-set maximum power).  Go scale Blank: It means whether to extend a certain length outside the actual frame of the figure on the preview/cutting of frame. If the frame crosses the border, the interface will prompt it. If the Enter key is pressed at this time, the system will cut the border at the maximum/minimum coordinates first, and th…

• 61, Ruida Technology RDC6445G RDC6445G Control System manual V1.2 SHENZHEN RUIDA TECHNOLOGY 54 8.9 Password input and settings 8.9.1 Password Input When you enter certain interfaces or perform certain operations, you need to enter the password. The interface is as follows: You can enter the password directly by pressing the number key, or you can select a number or letter by pressing the direction key, select by pressing the <Enter> key, and press the <Ente…