Puloon lcdm 2000 мануал

• Page 1
  Service Manual Service Manual Model : LCDM-2000 (Cash Dispensing Module) Total Page : 38 pages (including cover) Date 2001. 12 Version : V2.1 PULOON Technology Inc.
• Page 2
  2-2. Main Board Connector Layout 3. Error Code & Handling Method 3-1. Error Code & the details 3-2. Handling method according to Error Code 4. Self Diagnostic Mode using PC 4-1. Program Loading 4-2. Setting Procedure 4-3. Program Usage PULOON Technology Inc.
• Page 3
  LCDM-2000 MAIN CONTROLLER CASH OUT REJECT TRAY CASH CASSETTE(Upper) CASH CASSETTE(Lower) DOUBLE FEEDING AUTO CASH FEEDER DETECTION PULOON Technology Inc.
• Page 4
  LCDM-2000 Term Specification ˚ ˚ PULOON Technology Inc.
• Page 5
  LCDM-2000 Cassette Door Door Open Direction Insert Locker Cash Plate Cassette Handle Cash Plate Stopper Cash Plate Handle PULOON Technology Inc.
• Page 6
  Stopper is automatically closed & opened by backing pushing plate and opening door respectively. 1-3-4. Cash Cassette Base When cash cassette is inserted, the part of transporting open automatically by the function of Cash cassette base which is located in the part of transporting part. PULOON Technology Inc.
• Page 7
  Bill-End sign will displayed with stopping the unit. There is hole in the front of “Cash Cassette” and detection process is done by this hole. ( Please refer to the layout of sensor for location) PULOON Technology Inc.
• Page 8
  Feed Module consists of auto cash feeder part , double feeding detection part , diverting mechanism part , cash delivery part and Feature is shown below. Feed motor Note Path (Delivery) Diverter Pick-up Roller(Upper) One-way Roller(Upper) Double Detect Roller (Upper) Pick-up Roller(Lower) One-way Roller(Lower) Double Detect Roller (Lower) PULOON Technology Inc.
• Page 9
  LCDM-2000 < Auto Cash Feeder >- PULOON Technology Inc.
• Page 10
  LCDM-2000 Description Function ’ ’ ’ ’ PULOON Technology Inc.
• Page 11
  LCDM-2000 < Constitution of Thickness Recognition > PULOON Technology Inc.
• Page 12
  LCDM-2000 Description Function ’ ’ ’ PULOON Technology Inc.
• Page 13
  LCDM-2000 < Constitution of divergence part > PULOON Technology Inc.
• Page 14
  LCDM-2000 Description Function ’ ’ ’ ’ ’ ’ PULOON Technology Inc.
• Page 15
  LCDM-2000 1-4-4. Transportation part < Constitution of Transportation part > PULOON Technology Inc.
• Page 16
  LCDM-2000 — Segment Name Name ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ ’ PULOON Technology Inc.
• Page 17
  Note Path (Delivery) (11)REJECT TRAY S/W (14) CASH BOX SENSOR 0 (9) NEAREND (12) RVDT SENSOR 0 SENSOR 0 (1)(2)CHK SENSOR 1/2 (15) CASH BOX SENSOR 1 (10) NEAREND (13)RVDT SENSOR 1 SENSOR 1 (3)(4)CHK SENSOR 3/4 PULOON Technology Inc.
• Page 18
  LCDM-2000 SENSOR Name Function PULOON Technology Inc.
• Page 19
  LCDM-2000 1-4-6. Power Transportation part • G1 T3 MOTOR CLUTCH CLUTCH PULOON Technology Inc.
• Page 20
  LCDM-2000 Name Function PULOON Technology Inc.
• Page 21
  LCDM-2000 No Load Load TYPE Voltage Current Speed Torque Current Speed FB-806 180mA±1 4800rpm± 1kgf- 2400mA±2 3500rpm ±200rpm 00mA 250rpm 00mA PULOON Technology Inc.
• Page 22
  LCDM-2000 2. H/W Constitution SENSOR Circuit DIP SWITCH SEGEMENT CPU,ROM,RAM RVDT Circuit Solenoid,Clutch BLDC MOTOR RS232 Communication Circuit 24V  5V Conversion Circuit PULOON Technology Inc.
• Page 23
  Upper Near End sensor ( Near End 0 ) Upper RVDT ( RVDT 0 ) Wheel sensor BLDC Motor Reject Tray limit switch Lower Clutch ( Clutch 1 ) Divert Solenoid Upper Clutch ( Clutch 0 ) POWER RS232 Communication PULOON Technology Inc.
• Page 24
  STOP or low speed of MOTOR DIVERT_JAM_RUN Jam in the DIV SENSOR part EJECT_JAM_RUN TIMEOUT between DIV SENSOR and EJT SENSOR JAM_IN_CRI_LOWR Jam in the CHK SENSOR 3/4 part UPPER_CASH_BOX No Upper Cash Cassette UPPER_CASH_BOX No Lower Cash Cassette PULOON Technology Inc.
• Page 25
  — Is all of bill out from CASH CASSETTE? — Re install of CASH CASSETTE after checking above Management — Check NEAREND SENSOR in case of lack of bill < Normal Insertion of Bills > < Wrong Insertion of Bills > PULOON Technology Inc.
• Page 26
  — Is idle roller rotation in the GUIDE CASH FEED 2 ASS’Y normal? — Is fixing screw in GUIDE CASH FEED 1 / 2 / 3 ASS’Y normal? — Try again after checking above situation. Management — In case of Jam, Turn a handle shown below PULOON Technology Inc.
• Page 27
  — Is idle roller rotation status in GUIDE CASH FEED 7 ASS’Y normal? — Try again after checking above situation. Management — Replace ASS’Y in case of roller rotation problem in GUIDE CASH FEED 7 ASS’Y. PULOON Technology Inc.
• Page 28
  — In case of interference between SHAFT DIVERTER ASS’Y & SHAFT ASS’Y CASH FEED 3, Adjust location of SOLENOID Management PIN( Please refer to below picture) — Replace ASS’Y in case of idle roller rotation problem in GUIDE CASH FEED 7 ASS’Y. PULOON Technology Inc.
• Page 29
  Note Path (Delivery) (11)REJECT TRAY S/W (14) CASH BOX SENSOR 0 (9) NEAREND (12) RVDT SENSOR 0 SENSOR 0 (1)(2)CHK SENSOR 1/2 (15) CASH BOX SENSOR 1 (10) NEAREND (13)RVDT SENSOR 1 SENSOR 1 (3)(4)CHK SENSOR 3/4 PULOON Technology Inc.
• Page 30
  REJECT TRAY is not closed -Is the location of REJECT TRAY normal? Check Point — Is the location of CONNECTOR normal? — Insert REJECT TRAY to main body. Management — Connect J20 CONNECTOR in the MAIN PCB. PULOON Technology Inc.
• Page 31
  LCDM-2000 CODE Detail Stop or low speed of MOTOR — Is any obstacle in Power Transportation part? Check Point — Is the location of CONNECTOR correct? -Try again after checking above situation. Management — Check J15 CONNECTOR. PULOON Technology Inc.
• Page 32
  LCDM-2000 “ ” PULOON Technology Inc.
• Page 33
  LCDM-2000 PULOON Technology Inc.
• Page 34
  LCDM-2000    “ ” PULOON Technology Inc.
• Page 35
  LCDM-2000 “ ” “ ” “ ” PULOON Technology Inc.
• Page 36
  LCDM-2000 “ ” “ ” “ ” “ ” “ ” PULOON Technology Inc.
• Page 37
  LCDM-2000 “ ” “ ” PULOON Technology Inc.
• Page 38
  LCDM-2000 PULOON Technology Inc.

• Elkay SmartWell
  

  How to Replace Flavor & Enhancement Pouches1.2. 3. 4. Unlock and open the hood of the machine. Locate the pouches that need to be replaced.Disconnect the pouch from the dispenser. Dispose of empty pouch(es). Wash hands thoroughly with warm water and soap to sanitize.Connect the pouch to the dispenserUnlock the silv …

  SmartWell Beverage Dispenser, 3

• Cornelius R-404A
  

  IMPORTANT:TO THE INSTALLER.It is the responsibility of the Installer toensure that the water supply to thedispensing equipment is provided withprotection against backflow by an air gapas defined in ANSI/ASME A112. 1.2-1979; oran approved vacuum breaker or other suchmethod as proved effective by test.Water pipe connecti …

  R-404A Beverage Dispenser, 97

• Beverage-Air DD Series
  

  INSTALLATION AND OPERATING INSTRUCTIONSfor all HydrocarbonDD Direct Draw Dispenser Models3779 CHAMPION BLVD, WINSTON-SALEM, NC 27105Phone: (888) 845-9800 | Fax: (800) 253-5168 | Web: beverage-air.com809-180a 06/04/2020SEE BACK COVER FOR WARRANTY REGISTRATION …

  DD Series Dispenser, 25

• Nordson Pro-Meter S-Series
  

  Pro-Meterr S-Series CoupledDispensers with Integrated DriveCustomer Product ManualPart 1606702-05Issued 10/20NORDSON CORPORATION • AMHERST, OHIO • USAFor parts and technical support, call the NordsonIndustrial Coating Systems Customer Support Center at(800) 433−9319, or contact your local Nordson Representative.T …

  Pro-Meter S-Series Dispenser, 78

• Simeoni Fertil Dispenser
  

  Manufactured by Simeoni TecnogreenSimeoni Tecnogreen S.r.l.Via Camolli, 9 — 33077 Sacile(PN) Italy Phone +39 0434.738642 Fax +39 0434.70746E-mail: i[email protected]. simeonitecnogreen.comMONTAGGIO …

  Fertil Dispenser Dispenser, 5

• Compac CNG
  

  Compac Industries Ltd. 52 Walls Road. Penrose. Auckland 1061, New Zealand. PO Box 12 417 Penrose. Auckland 1642. New Zealand. Tel: +64 9 579 2094 Fax: +64 9 579 0635 [email protected] www.compacngv.com Compac Industries Ltd. 52 Walls Road. Penrose. Auckland 1061, New Zealand. PO Box 12 417 Penrose. Auckland 1 …

  CNG Dispenser, 125

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38