(Ocr-Read Summary of Contents of some pages of the Domino Ax Series Document (Main Content), UPD: 12 May 2023)
-
24, EPT034331 Issue 5 May 2021 23 i-Pulse2 Print Head (Ax130i) Notes: (1) Too much ink or dirt on the deflector plates and gutter may reduce print quality. Check and clean the i-Pulse2 print head regularly. Cleaning intervals vary, depending on the ink type and installation environment. (2) Required tools: T6 Torx Driver, correct wash fluid To clean the i-Pulse2 print head: (1) Press and hold the standby button for 2 seconds and wait for …
-
40, EPT034331 Issue 5 May 2021 39 400mm 394mm Ax150i Cabinet 373mm 430mm 381mm 411mm Ax350i/Ax550i Cabinet
… -
42, EPT034331 Issue 5 May 2021 41 CONTENTS OF EU DECLARATION OF CONFORMITY Manufacturer Domino UK Limited, Trafalgar Way, Bar Hill, Cambridge, CB23 8TU, United Kingdom Trademark Domino Authorized Representative Domino Laser GmbH, Fangdieckstrasse 75a, 22547 Hamburg, Germany Product Description Industrial ink jet printer including accessories Model/Type Number(s) Ax150i, Ax350i, Ax550i We herewith declare under our sole responsibility t…
-
36, EPT034331 Issue 5 May 2021 35 How to Prime the Ink System The ink system must be primed before the printer can be used for the first time. Before starting this procedure, ensure that the ink and make-up levels are at least half full. This will be indicated by yellow or green make-up and ink level icons on the information bar on the TouchScreen. To run the ink p…
-
8, EPT034331 Issue 5 May 2021 7 Spillages Ventilation Solvent based printing inks and their vapours are flammable. • Provide an extraction system to remove fumes and vapours from the production line and from anywhere else that the printer may be operated. • 10 air changes per hour is the minimum required. • 20 air changes per hour is recommended. WARNING: Flammable material. Risk of fire and personal injury. Clean up all ink spillages …
-
26, EPT034331 Issue 5 May 2021 25 i-Pulse Duo Print Head (Ax350i or Ax550i) Note: Required tools: T6 Torx Driver, correct wash fluid To clean the i-Pulse Duo print head: (1) Press and hold the standby button for 2 seconds and wait for the printer to shut down. (2) Disconnect the power lead from the rear of the printer. (3) Unscrew the thum…
-
44, EPT034331 Issue 5 May 2021 43 CONTENTS OF EU DECLARATION OF CONFORMITY Manufacturer Domino UK Limited, Trafalgar Way, Bar Hill, Cambridge, CB23 8TU, United Kingdom Trademark DOMINO Authorized Representative Domino Laser GmbH, Fangdieckstrasse 75a, 22547 Hamburg, Germany Product Description Industrial ink jet printer including accessories Model/Type Number(s) Ax130i We herewith dec…
-
27, 26 EPT034331 Issue 5 May 2021 (5) Replace the charge electrodes. (6) Replace the print head cover and tighten the thumb screw. Loosen screw and remove the Charge Electrode. Clean in the slot with relevant wash, dry using lint free tissue. Clean any ink residue from deflector plates Clean any ink residue from gutter area Loosen screw and remove the Charge Electrode. Clean in the slot with relevant wash, dry using lint free tissue.
… -
31, 30 EPT034331 Issue 5 May 2021 INSTALLATION The installation technician (or distributor) should make sure that the printer, and the production line it is installed on are connected to ground. • Securely ground all metallic items within 12 inches (300 mm) of the print head. • Check the ground connection using an Ohm Meter, DVM or other suitable devi…
-
5, Domino Ax Series 4 EPT034331 Issue 5 May 2021 WARNINGS, CAUTIONS AND NOTE DEFINITIONS Note: Contains important information. Symbols WARNING: A hazard which may cause death or injury. CAUTION: A hazard which may cause damage to equipment or environment Wear eye protection. Wear protective gloves. Disconnect power before doing maintenance or repair. Connect a ground terminal from the p…
-
37, Domino Ax Series 36 EPT034331 Issue 5 May 2021 SPECIFICATION Temperature Range (Working): +5º to +45ºC (42ºF to 112ºF) Temperature Range (Storage): -20º to +60ºC (-4ºF to +140ºF) (machine dry — storage, wet dependent upon fluids) Humidity: 0 — 90% RH (non-condensing) Pollution Degree of Intended Environment: Degree 2 Maximum Altitude of Operation: < 2000m Intended Environment: Indoors only Electrical Supply: 10…
-
33, 32 EPT034331 Issue 5 May 2021 TouchScreen Mounting (Ax350i and Ax550i) Ax350i x8 M5 x 25mm (VESA 75 Mount) Ax550i
… -
19, Domino Ax Series 18 EPT034331 Issue 5 May 2021 (6) Remove the sealing strip from the new ITM and lubricate the manifold pipes with wash. (7) Fit sealing strip onto the old ITM. (8) Place paper towel or similar below the ink block and use wash to clean any dried residual ink from the ink block valve face. (9) Insert the new ITM. Remove ITM Sealing Strip Lubricate with …
-
16, EPT034331 Issue 5 May 2021 15 (3) Use a 6mm hex key to break and remove the sealing tab. (4) Check for leaks. (5) Shut the door. Make-up 6mm Hex Key Ink Ink CartridgeMake-up Cartridge
… -
28, EPT034331 Issue 5 May 2021 27 i-Pulse RS Print Head (Ax350i or Ax550i) The i-Pulse RS print head requires regular cleaning when using heavily pigmented ink. Check the print head before every shift and clean as necessary. To clean the i-Pulse RS print head: (1) Press and hold the standby button for 2 seconds and wait for the printer to shut down. (2) Discon…
-
9, 8 EPT034331 Issue 5 May 2021 Flammable Vapour and Electro-Static Discharge The printer puts an electrical charge on each drop of ink used for printing. Normally these electrical charges are conducted to ground. Ground the equipment correctly to make sure electrical charges are conducted to ground. Maintenance During maintenance, ink drops may be collected in a container. Use a container made of conducting mate…
Menu
Domino’s i-Pulse print head
Next-generation technology i-Pulse print head with precision ink drop generation.
Our Ax-Series consumables range
Ink and makeup configuration for the Ax150i.
The Ax150i redefines the standard for entry level inkjet printing
Whether you’re just starting out or scaling up your production, the Ax150i provides Domino technology at a surprisingly competitive price. Benefiting from its compact size and highly-responsive stop-start performance, the Ax150i provides maximum flexibility and reliability to meet your changing coding needs. The Ax150i features the i-Pulse printhead for high-quality and consistent printing and supports a wide range of i-Pulse printing inks. Ink and make-up changes are quick and easy thanks to the intelligent consumable system, while the i-Tech module removes the cost and inconvenience of traditional servicing. With user simplicity at its core, the Ax150i benefits from the i-Techx electronics platform and innovative QuickStep user interface to provide a fast, easy-to-understand and error-reducing experience to the operator. The latest entry-level CIJ printer from Domino, the Ax150i builds on Domino’s strong reputation for high-reliability, ease of use and low cost of ownership industrial printers. The Ax150i is the ideal choice if you want to save money while enjoying flexibility, reliability, and simplicity in batch coding and variable data printing.
The Domino Ax-Series Ax150i is the latest CIJ entry-level printer that replaces a range of i-Tech A-Series products. The Domino A120 and A100+ reputations were built on ease of use, low cost of ownership and low running costs. The Ax150i also replaces the A220. It has the ability to print up to five lines of code and is an ideal choice if you want to save money at the same time as enjoying flexibility, reliability, and simplicity.
Increased productivity
Precision ink drop generation eliminates downtime on your production line
Clean And Clear Codes
High resolution print messages at your fastest speeds – 9 drop quality at 7 drop speeds
Flexible and Easy To Use
Newly designed intuitive Domino interface with smartphone usability levels
Service-Free Operation
Avoid or resolve problems using remote diagnostics, event alerts and remote monitoring
-
Ax150i Product Brochure — EN (780KB)
*Product performance may vary — see Terms & Conditions for details.
Catalog excerpts
Rewriting the Rules in Continuous Ink Jet Printing Domino Design Designed for Real Life • Minimum operator intervention • Service free operation • Active systems, reducing waste i-Pulse Print Head & Inks • Perfect drops every time • 9 drop quality at 7 drop speeds • Inks for even the toughest substrates • Matching of print heads and ink • Multiple print size options i-Techx Putting you in Control • Designed for the factory of the future • Smartphone usability levels • High throughput variable coding • Fl
Open the catalog to page 1
Ax150i CIJ Printer Optimum Line Availability Continuous production can be maintained with optimum line availability as there is no need for specialist skills or tools to replace the i-Tech Module. CleanFill technology and colour-coded, one-fit consumables eliminate the risk of spillage or mess. Next Generation Coding Technology Introducing i-Pulse. An industry-leading breakthrough in Continuous Ink Jet technology, i-Pulse print heads control individual ink drop formation resulting in significant gains in ink usage, droplet accuracy and placement at traditional print speeds. Flexible And…
Open the catalog to page 2