- Manuals
- Brands
- Orwak Manuals
- Garbage Disposal
- 3110
- Operating instructions manual
-
Contents
Table of Contents -
Bookmarks
Quick Links
Edition 4, From serial no. 106000-
Publ. no 4872223-00
OM 3110, 2012-02
Orwak 3110
OPERATING INSTRUCTIONS (IN THE ORIGINAL)
Related Manuals for Orwak 3110
Summary of Contents for Orwak 3110
-
Page 1
Edition 4, From serial no. 106000- Publ. no 4872223-00 OM 3110, 2012-02 Orwak 3110 OPERATING INSTRUCTIONS (IN THE ORIGINAL) -
Page 2: Table Of Contents
English CONTENTS SAFETY Please read the operating instructions BEFORE operating the machine. Our warranty/product responsibility requires that: Safety….• instructions are followed, and that no conversion or modification is carried Control panel..out. Operating • original spare parts, and hydraulic oils and lubricants recommended by the machine manufacturer are used.
-
Page 3: Control Panel
English RANGE OF APPLICATION The machine is a hydraulically operated baler intended for compacting bulky materials such as cardboard, paper and plas- tic. The machine may only be used in areas that have a roof, protection against wind, and normal lighting. The machine is intended for use within the temperature range -10°C to +40°C. A low-temperature oil and/or heater should be used at tempera- tures lower than +5°C. Materials that are flammable or of an explosive nature, such as pressurised containers or the like, which could cause injury, damage, fire or an explosion if exposed to pressure or sparks, must not be compacted in the machine. CONTROL PANEL Voltage light — this Temperature lights light indicates that Blue lights indicate that the there is power to the machine is cold.
-
Page 4: Operating Instructions
(If the machine is set to “AUTO” the press plate will lower automatically and stop UNDER PRESSURE against the bale in its down position, and step 13 will be skipped.) 13 Lower the press plate using the down arrow. The press plate will automatically stop in its down position and keep the bale UNDER PRESSURE. 14 Tie the straps. 15 Raise the press plate back up using the up arrow. 16 Open the doors and remove the bale using the bale cart. http://www.orwak.se/~/media/Movies/3110.ashx…
-
Page 5: Installation
English INSTALLATION Box 58 576 22 Sävsjö Sweden Type Serial No Product No Date Weight WEEKLY INSPECTION AND MAINTENANCE NOTE! During inspection and maintenance, servicing and the removal of trapped waste etc: 1. Set to manual mode (MAN) on the control panel. 2. Disconnect the power to the machine by removing the plug from the wall socket. 3. Do not work inside the machine. TROUBLESHOOTING: First, check: OVERLOAD PROTECTION NORMAL TRIPPED FUSE SAFETY CHECKS — Check the shutter switch: it must not be possible to start the machine if the upper shutter is open/opened.
-
Page 6: Technical Specifications
English TECHNICAL 3110 (mm) DIMENSIONAL DIAGRAM SPECIFICATIONS (490 3110-00) GENERAL DATA Total weight: 340 kg Transport height: 1,990 mm Dimensions: Height: 1,990 mm Width: 866 mm Depth: 680 mm Depth with open door: 1,365 mm Recommended space for machine in operation (working area): Height: 1,990 mm Width:…
-
Page 7
Tel: 46-382-15700 Tel: 46-382-15700 Fax: 46-382-10607 Telefax: 46-382-10607 declare under our sole responsibility that the product model (serial number specified on the first page) 4903110-00 – 4903110-99 4903110-S001 – 4903110-S999 to which this declaration relates is in conformity with the following standards or other normative documents in accordance with the provisions of Directives 2006/42/EEC (Machinery Directive) 2004/108/EEC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2009/125/EC ErP Directive (Energy-related Products) 3110 (mm) The machine fulfils the requirements of PL = c and category 1 according to EN ISO 13849-1:2008 EN 60204-1 (Safety of Machinery – Electrical Equipment of Machines) EN 61000-6-1 (EMC Immunity for residential, commercial and light-industrial environments) EN 61000-6-2 (EMC Immunity for industrial environments) EN 61000-6-3 (EMC Emission standard for residential, commercial and light-industrial environments) EN 61000-6-4 (EMC Emission standard for industrial environments) EN ISO 13849-1 (Safety of Machinery – Safety-related parts of control systems) Sävsjö 2012-02-01 Arne Isaksson Product Manager and compiler of technical documentation 13 7… -
Page 8
Leader in compaction and baling solutions Orwak is a world leader in compaction and baling solu make all the di erence. When you partner with Orwak, tions for solid waste material at source. We develop, you also gain access to the vast experience we have manufacture and market a comprehensive range of built up since 1971.
Пресс Orwak 3110 S прекрасно подходит для предприятий с небольшим объемом упаковочных отходов и очень широко используется в розничных магазинах для уплотнения картонной упаковки.
Небольшая высота в сочетании с малой занимаемой площадью позволяют разместить пресс практически в любом месте. Orwak 3110 — маленький, но эффективный пресс, который позволяет сократить объемы отходов в 7-8 раз!
Конструктивное отличие модели ORWAK 3110S — усиленная металлическая крышка верхней панели, вместо пластиковой как на 3110. Данная модификация была разработана для соответствия требованиям одного из российских клиентов к данному оборудованию.
Рекомендуемые материалы
Бумага
- Картон
- Бумажные мешки
- Измельчённая бумага
Пластик
- Плёнка
- Полиэтиленовые пакеты
Видеоролик с демонстрацией работы пресса
Характеристики
Усилие пресса
4 тонны
Вес кипы, картон
до 50 кг
Время цикла
33 сек
Преимущества ORWAK 3110
- Компактные размеры
- Функция автостарта
- Переключатель типа материала (картон/пленка)
- Регулируемый размер кипы
- Низкий уровень шума, способствует улучшению условий труда
- Тележка для кип в комплекте
Дополнительные материалы
Листовка ORWAK 3110 / 3110S, .PDF
Инструкция по эксплуатации ORWAK 3110 / 3110S, .PDF
Table of Contents for Orwak 3110:
-
3 4 2 5 6 7 13 9 10 14 15 16 16 12 8 11 1 4872303-00(VG9) = Paper Plastic http://www.orwak.se/~/media/Movies/3110.ashx 10 4 English OPERATING INSTRUCTIONS Mounting the straps 1 Openthestrapshuttersandthe upperdooralltheway.Place the strap rolls in the strap holder compartment and insert the strapsintothestrapfunnels. 2 Whenthestrapendsa
-
9 3 CONTROL PANEL English Paper — indicates that the machine is set to compact paperandcardboard. Plastic — indicates that the machine is set to compact plastic. See more under Technical data. Bale size — indicates the selectedbalesize(small –medium–large). Thebalesizecanbe xed.Contactyourlocal distributorformoreinfor- mation. Up arrow -usedto raise the press plate to its norma
-
0 OFF A B 10A Min 0,6 m Min 0,6 m Box 58 576 22 Sävsjö Sweden Type Serial No Product No Date V Weight Hz kW A * * * *** 1 2 3 4 5 11 5 English INSTALLATION NOTE!Duringinspectionandmaintenance,servicingandtheremovaloftrappedwaste etc: 1.Settomanualmode(MAN)onthecontrolpanel. 2. Disconnectthepowertothemachinebyremovingtheplugfrom
-
Edition 4, From serial no. 106000- Publ. no 4872223-00 OM 3110, 2012-02 O r w a k 3110 3110 OPERATING INSTRUCTIONS (IN THE ORIGINAL)
-
Orwak is a world leader in compaction and baling solu — tions for solid waste material at source. We develop, manufacture and market a comprehensive range of waste compactors, baling systems and “Brickman” bri — quette presses for recyclable materials that make waste management more profitable. This is where Orwak’s unequalled technology, expertise and service support make all the di erence. When you partner with Orwak, you also gain access to the vast experience we have built up since 1971. Orwak is wholly owned by t
-
8 2 Please read the operating instructions BEFORE operating the machine. Our warranty/product responsibility requires that: • instructions are followed, and that no conversion or modication is carried out. • original spare parts, and hydraulic oils and lubricants recommended by the machine manufacturer are used. • at least one annual service is carried out. The user of the machine is responsible for the safety checks, and for ensuri
-
3110 (mm) 1365 680 866 704 1990 458550 648 98 OK 2011-11-14 3115 1000002-00 380 kg ~950 mm ~1993 mm (490 3110-00) 12 6 DIMENSIONAL DIAGRAM TECHNICAL SPECIFICATIONS TRANSPORT English GENERAL DATA Total weight: 340kg Transportheight: 1,990mm Dimensions: Height: 1,990mm Width: 866 mm Depth: 680mm Depth with open door: 1,365mm Recommended space for machine in operation (working area): Height: 1,990
Questions, Opinions and Exploitation Impressions:
You can ask a question, express your opinion or share our experience of Orwak 3110 device using right now.
- Manuals
- Brands
- Orwak Manuals
- Garbage Disposal
- 3110
- Operating instructions manual
-
Contents
Table of Contents -
Bookmarks
Quick Links
Edition 4, From serial no. 106000-
Publ. no 4872223-00
OM 3110, 2012-02
Orwak 3110
OPERATING INSTRUCTIONS (IN THE ORIGINAL)
Related Manuals for Orwak 3110
Summary of Contents for Orwak 3110
-
Page 1
Edition 4, From serial no. 106000- Publ. no 4872223-00 OM 3110, 2012-02 Orwak 3110 OPERATING INSTRUCTIONS (IN THE ORIGINAL) -
Page 2: Table Of Contents
English CONTENTS SAFETY Please read the operating instructions BEFORE operating the machine. Our warranty/product responsibility requires that: Safety….• instructions are followed, and that no conversion or modification is carried Control panel..out. Operating • original spare parts, and hydraulic oils and lubricants recommended by the machine manufacturer are used.
-
Page 3: Control Panel
English RANGE OF APPLICATION The machine is a hydraulically operated baler intended for compacting bulky materials such as cardboard, paper and plas- tic. The machine may only be used in areas that have a roof, protection against wind, and normal lighting. The machine is intended for use within the temperature range -10°C to +40°C. A low-temperature oil and/or heater should be used at tempera- tures lower than +5°C. Materials that are flammable or of an explosive nature, such as pressurised containers or the like, which could cause injury, damage, fire or an explosion if exposed to pressure or sparks, must not be compacted in the machine. CONTROL PANEL Voltage light — this Temperature lights light indicates that Blue lights indicate that the there is power to the machine is cold.
-
Page 4: Operating Instructions
(If the machine is set to “AUTO” the press plate will lower automatically and stop UNDER PRESSURE against the bale in its down position, and step 13 will be skipped.) 13 Lower the press plate using the down arrow. The press plate will automatically stop in its down position and keep the bale UNDER PRESSURE. 14 Tie the straps. 15 Raise the press plate back up using the up arrow. 16 Open the doors and remove the bale using the bale cart. http://www.orwak.se/~/media/Movies/3110.ashx…
-
Page 5: Installation
English INSTALLATION Box 58 576 22 Sävsjö Sweden Type Serial No Product No Date Weight WEEKLY INSPECTION AND MAINTENANCE NOTE! During inspection and maintenance, servicing and the removal of trapped waste etc: 1. Set to manual mode (MAN) on the control panel. 2. Disconnect the power to the machine by removing the plug from the wall socket. 3. Do not work inside the machine. TROUBLESHOOTING: First, check: OVERLOAD PROTECTION NORMAL TRIPPED FUSE SAFETY CHECKS — Check the shutter switch: it must not be possible to start the machine if the upper shutter is open/opened.
-
Page 6: Technical Specifications
English TECHNICAL 3110 (mm) DIMENSIONAL DIAGRAM SPECIFICATIONS (490 3110-00) GENERAL DATA Total weight: 340 kg Transport height: 1,990 mm Dimensions: Height: 1,990 mm Width: 866 mm Depth: 680 mm Depth with open door: 1,365 mm Recommended space for machine in operation (working area): Height: 1,990 mm Width:…
-
Page 7
Tel: 46-382-15700 Tel: 46-382-15700 Fax: 46-382-10607 Telefax: 46-382-10607 declare under our sole responsibility that the product model (serial number specified on the first page) 4903110-00 – 4903110-99 4903110-S001 – 4903110-S999 to which this declaration relates is in conformity with the following standards or other normative documents in accordance with the provisions of Directives 2006/42/EEC (Machinery Directive) 2004/108/EEC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2009/125/EC ErP Directive (Energy-related Products) 3110 (mm) The machine fulfils the requirements of PL = c and category 1 according to EN ISO 13849-1:2008 EN 60204-1 (Safety of Machinery – Electrical Equipment of Machines) EN 61000-6-1 (EMC Immunity for residential, commercial and light-industrial environments) EN 61000-6-2 (EMC Immunity for industrial environments) EN 61000-6-3 (EMC Emission standard for residential, commercial and light-industrial environments) EN 61000-6-4 (EMC Emission standard for industrial environments) EN ISO 13849-1 (Safety of Machinery – Safety-related parts of control systems) Sävsjö 2012-02-01 Arne Isaksson Product Manager and compiler of technical documentation 13 7… -
Page 8
Leader in compaction and baling solutions Orwak is a world leader in compaction and baling solu make all the di erence. When you partner with Orwak, tions for solid waste material at source. We develop, you also gain access to the vast experience we have manufacture and market a comprehensive range of built up since 1971.
Пресс Orwak 3110 S прекрасно подходит для предприятий с небольшим объемом упаковочных отходов и очень широко используется в розничных магазинах для уплотнения картонной упаковки.
Небольшая высота в сочетании с малой занимаемой площадью позволяют разместить пресс практически в любом месте. Orwak 3110 — маленький, но эффективный пресс, который позволяет сократить объемы отходов в 7-8 раз!
Конструктивное отличие модели ORWAK 3110S — усиленная металлическая крышка верхней панели, вместо пластиковой как на 3110. Данная модификация была разработана для соответствия требованиям одного из российских клиентов к данному оборудованию.
Рекомендуемые материалы
Бумага
- Картон
- Бумажные мешки
- Измельчённая бумага
Пластик
- Плёнка
- Полиэтиленовые пакеты
Видеоролик с демонстрацией работы пресса
Характеристики
Усилие пресса
4 тонны
Вес кипы, картон
до 50 кг
Время цикла
33 сек
- Компактные размеры
- Функция автостарта
- Переключатель типа материала (картон/пленка)
- Регулируемый размер кипы
- Низкий уровень шума, способствует улучшению условий труда
- Тележка для кип в комплекте
Дополнительные материалы
Листовка ORWAK 3110 / 3110S, .PDF
Инструкция по эксплуатации ORWAK 3110 / 3110S, .PDF
English
WARNING!
Only the operator is
allowed in the working
area of the machine!
Mounting the straps
1 Open the strap shutters and the
upper door all the way. Place
the strap rolls in the strap holder
compartment and insert the
straps into the strap funnels.
2 When the strap ends are visible
inside the chamber, the straps
can be pulled forward and out
through their respective slots in
the lower door.
3 Tie a knot in each strap and
secure in the slots in the beam
at the lower front edge of the
machine.
4 Using the strap hook, place the
straps in the strap slots in the
bottom and along the back of
the machine.
The machine is now ready for use.
Compaction
5
Distribute the waste evenly
inside the chamber.
6
Close the upper door – the
start button will glow green.
(If the machine is set to
«AUTO» an automatic
compaction cycle will start
once the door is closed, and
step 7 will be skipped.)
7
Press the start button for a
manual compaction cycle.
Baling (full bale)
8
The bale light will flash
when the bale is ready and
can be removed.
9
Open the upper door and
pull the straps over the bale
and through the slots in the
lower door.
10 Cut the straps with the knife.
11 Place the strap ends that
are not to be tied inside the
chamber.
12 Close the upper door.
(If the machine is set to
«AUTO» the press plate will
lower automatically and
stop UNDER PRESSURE
against the bale in its down
position, and step 13 will be
skipped.)
13 Lower the press plate using
the down arrow. The press
plate will automatically
stop in its down position
and keep the bale UNDER
PRESSURE.
14 Tie the straps.
15 Raise the press plate back
up using the up arrow.
16 Open the doors and remove
the bale using the bale cart.
4
10
=
4872303-00 (VG9)
Paper
Plastic
1
6
5
9
12
10
16
2
8
13
11
14
http://www.orwak.se/~/media/Movies/3110.ashx
4
3
7
15
16
Table of Contents for Orwak 3110:
-
Edition 4, From serial no. 106000- Publ. no 4872223-00 OM 3110, 2012-02 O r w a k 3110 3110 OPERATING INSTRUCTIONS (IN THE ORIGINAL)
-
Orwak is a world leader in compaction and baling solu — tions for solid waste material at source. We develop, manufacture and market a comprehensive range of waste compactors, baling systems and “Brickman” bri — quette presses for recyclable materials that make waste management more profitable. This is where Orwak’s unequalled technology, expertise and service support make all the di erence. When you partner with Orwak, you also gain acce
-
9 3 CONTROL PANEL English Paper — indicates that the machine is set to compact paperandcardboard. Plastic — indicates that the machine is set to compact plastic. See more under Technical data. Bale size — indicates the selectedbalesize(small –medium–large). Thebalesizecanbe xed.Contactyourlocal distributorformoreinfor- mation. Up arrow -usedto raise the press plate to its normal position. Down arrow -usedto lower the press plate. The press pla
-
3110 (mm) 1365 680 866 704 1990 458550 648 98 OK 2011-11-14 3115 1000002-00 380 kg ~950 mm ~1993 mm (490 3110-00) 12 6 DIMENSIONAL DIAGRAM TECHNICAL SPECIFICATIONS TRANSPORT English GENERAL DATA Total weight: 340kg Transportheight: 1,990mm Dimensions: Height: 1,990mm Width: 866 mm Depth: 680mm Depth with open door: 1,365mm Recommended space for machine in operation (working area): Height: 1,990mm Width: 2,066mm Depth with open door: 1,965mm Loading aperture: Height:�
-
Sävsjö2012-02-01 Box58 S-57622Sävsjö, Tel:46-382-15700 Telefax:46-382-10607 3110 (mm) 1365 680 866 704 1990 458550 648 98 ABORWAK Arne Isaksson 4903110-00 – 4903110-99 4903110-S001 – 4903110-S999 13 7 English towhichthisdeclarationrelatesisinconformitywiththefollowingstandardsorothernormative documentsinaccordancewiththeprovisionsofDirectives declareu
-
3 4 2 5 6 7 13 9 10 14 15 16 16 12 8 11 1 4872303-00(VG9) = Paper Plastic http://www.orwak.se/~/media/Movies/3110.ashx 10 4 English OPERATING INSTRUCTIONS Mounting the straps 1 Openthestrapshuttersandthe upperdooralltheway.Place the strap rolls in the strap holder compartment and insert the strapsintothestrapfunnels. 2 Whenthestrapendsarevisible insidethechamber,thestraps canbepulledforwardandout throughtheirrespe
-
8 2 Please read the operating instructions BEFORE operating the machine. Our warranty/product responsibility requires that: • instructions are followed, and that no conversion or modication is carried out. • original spare parts, and hydraulic oils and lubricants recommended by the machine manufacturer are used. • at least one annual service is carried out. The user of the machine is responsible for the safety checks, and for ensuring that daily maintenan
Questions, Opinions and Exploitation Impressions:
You can ask a question, express your opinion or share our experience of Orwak 3110 device using right now.
Note for Owners:
Guidesimo.com webproject is not a service center of Orwak trademark and does not carries out works for diagnosis and repair of faulty Orwak 3110 equipment. For quality services, please contact an official service center of Orwak company. On our website you can read and download documentation for your Orwak 3110 device for free and familiarize yourself with the technical specifications of device.
-
Dean Shortening Disposal Unit SDU50
Specifically designed for the removal of waste oil from the kitchenDean provides the answer for the transpor-tation of waste oil from the kitchen to the disposal container, with shortening disposal units, available in 50- and 90-lb. (25 and 45 liter) capacities.The low center of gravity provides stability when transporting or operating the unit. The heavy-duty manual pump is located at a convenien …
Shortening Disposal Unit SDU50 Garbage Disposal, 2
-
Euro-Pro GC130HS
GARBAGE CAN & CENTRAL VAC SYSTEMOWNER’S MANUALModel: GC130HS120 V. 60 Hz., 12 Amps. EURO-PRO Operating LLCU.S.: 94 Main Mill Street, Door 16 Canada: 4400 Bois-FrancPlattsburgh, NY 12901 St-Laurent, QC H4S 1A7Tel. : 1 (800) 798-7398COPYRIGHT © EURO-PRO OPERATING LLC 2006 …
GC130HS Garbage Disposal, 8
-
GE GFC1000Y
GE AppliancesGFC1000Y—Continuous Feed DisposerCreated 7/9714-5/88-1/43-1/46-1/4Inlet/Outlet DiametersDishwasher inlet diameter (in.) 7/8Drain outlet diameter (in.) 1-1/2Disposall®Food Waste Disposer Dimensions (in inches)For answers to your Monogram,®GE ProfilePerformance Series,™GE Profile,™GE, Hotpoint and RCA appliance questions, call GE Answer Center®service, 800.626.2000.RListed b …
GFC1000Y Garbage Disposal, 2
-
Bort MASTER ECO
MASTER ECO91275752ALLIGATOR93410754ALLIGATOR Plus93410761Alligator Max93410778DE. Hausmüll zerkleinerer . . . . . . . . . 5EN. Waste disposer . . . . . . . . . . . . . . . .9FR. Déchiqueteuse de déchets . . . .13RU. Измельчитель отходов . . . . . . 17 …
MASTER ECO Garbage Disposal, 19
-
Jenn-Air W10242571B
JENN-AIR® COMPACTOR/COMPACTEURIntegrated/IntégréUse & Care GuideFor questions about features, operation/performance, parts, accessories, or service in the U.S.A., call: 1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.In Canada, call: 1-800-807-6777, or visit our website at www.jennair.ca.Guide d’utilisation et d’entretienAu Canada, pour assistance, installation ou …
W10242571B Garbage Disposal, 28
-
Tweeny MAYFAIR
TweenyDomestic Food Waste Disposal UnitsThank you for choosing the most environmentally friendly way of disposing of your food waste. Remember at the end of the machines life we can collect it and recycle it.MAYFAIR CHELSEA CHELSEA-PLUS VICTORIA KENSINGTON WESTMINSTER 125Operating and Installation Manual …
MAYFAIR Garbage Disposal, 24
-
disperator 500A-HK
FOOD WASTE DISPOSER 500A-HK EXCELLENT SERIESWITH PROTECTIVE LID FOR INSTALLATION IN WORKING BENCH OR TABLETOPProduct Descripon Installaon Safety Operaon ServiceUSER MANUALUser manual in OriginalDoc. ref: 500A_HK_am_en_210602DISPERATOR AB Tel: 08-724 0160 E-mail: [email protected]älarvägen 9, 141 71 Segeltorp Web page: www.disperator.se …
500A-HK Commercial Food Equipment, 42
-
Whirlpool 800 SERIES
Use & CareMODELS: 800 and 900 Model Series9871676Compactor Safety ………………………………2Electrical Requirements……………………….3How Your Compactor Works………………..3Parts and Features………………………………4Installing Your Compactor……………………5Unpacking Your Compactor ………………..5Space Requirements……………………… …
800 SERIES Trash Compactor, 16
-
GE Disposall GFC1020T
GE Appliances17 1/4 5 9/16Disposers-Continuous Feed7 1/48 1/2 Inlet/Outlet Diameters Dishwasher inlet diameter (in.) 3/4 Drain outlet diameter (in.) 1-1/2Disposall® Food Waste Disposer Dimensions (in inches)For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website atGEAppliances.com or call GE Answer Center® service, 800.626.2000.Listed by Underwriters Lab …
Disposall GFC1020T Garbage Disposal, 2
-
Rubbermaid Infinity 9W31
9W31Infinity™ Base-Mount Smoking ReceptacleCendrier étouffoir sur pied InfinityMCCenicero de pie Infinity™27mmD EC3x2xABF G H 1FGEHBFDOPTIONAL OPCIONAL OPTIONNEL #1812015InfinityTM Base-Mount Smoiking ReceptacleCendrier étouffoir sur pied InfinityMCCenicero de pie InfinityTMAuf Basis montierter Infinity™ AscherInfinity™-rookzuil op voetPortacenere Infinity™ — Fissaggio a …
Infinity 9W31 Garbage Disposal, 19
Popular Garbage Disposal User Guides:
Download or browse on-line these Operating Instructions Manual for Orwak 3110 Garbage Disposal.
Summary of Contents:
[Page 1] Orwak 3110 Edition 4, From serial no. 106000- Publ. no 4872223-00 OM 3110, 2012-02 O r w a k 3110 3110 OPERATING INSTRUCTIONS (IN THE ORIGINAL) |
[Page 2] Orwak 3110 8 2 Please read the operating instructions BEFORE operating the machine. Our warranty/product responsibility requires that: • instructions are followed, and that no conversion or modication is carried ou… |
[Page 3] Orwak 3110 9 3 CONTROL PANEL English Paper — indicates that the machine is set to compact paperandcardboard. Plastic — indicates that the machine is set to compact plastic. See more under Technical data. Bale size — indicates the selec… |
[Page 4] Orwak 3110 3 4 2 5 6 7 13 9 10 14 15 16 16 12 8 11 1 4872303-00(VG9) = Paper Plastic http://www.orwak.se/~/media/Movies/3110.ashx 10 4 English OPERATING INSTRUCTIONS Mounting the straps 1 Openthestrapshuttersandthe upperdoorall�… |
[Page 5] Orwak 3110 0 OFF A B 10A Min 0,6 m Min 0,6 m Box 58 576 22 Sävsjö Sweden Type Serial No Product No Date V Weight Hz kW A * * * *** 1 2 3 4 5 11 5 English INSTALLATION NOTE!Duringinspectionandmaintenance,servicingandtheremovalof�… |
[Page 6] Orwak 3110 3110 (mm) 1365 680 866 704 1990 458550 648 98 OK 2011-11-14 3115 1000002-00 380 kg ~950 mm ~1993 mm (490 3110-00) 12 6 DIMENSIONAL DIAGRAM TECHNICAL SPECIFICATIONS TRANSPORT English GENERAL DATA Total weight: 340kg Transportheight: … |
[Page 7] Orwak 3110 Sävsjö2012-02-01 Box58 S-57622Sävsjö, Tel:46-382-15700 Telefax:46-382-10607 3110 (mm) 1365 680 866 704 1990 458550 648 98 ABORWAK Arne Isaksson 4903110-00 – 4903110-99 4903110-S001 – 49031… |
[Page 8] Orwak 3110 Orwak is a world leader in compaction and baling solu — tions for solid waste material at source. We develop, manufacture and market a comprehensive range of waste compactors, baling systems and “Brickman” bri — quette presses for recyclable ma… |