-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
Feature Guide
Hybrid IP-PBX
KX-NS500
Model No.
Thank you for purchasing this Panasonic product.
Please read this manual carefully before using this product and save this manual for future use.
In particular, be sure to read «1.1.1 For Your Safety (Page 16)» before using this product.
KX-NS500: PFMPR Software File Version 004.20000 or later.
Manuals and supporting information are provided on the Panasonic Web site at:
http://panasonic.net/pcc/support/pbx/
Summary of Contents for Panasonic KX-NS500
This manual is also suitable for:
Kx-ns300
 |
[Page 1] Panasonic KX-NS500 PC Programming Manual Hybrid IP-PBX Model No. KX-NS500 Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use. In particular, be sure to read «1.1.1 Fo… |
 |
[Page 2] Panasonic KX-NS500 Introduction About this Programming Manual The PC Programming Manual is designed to serve as a system programming reference for the Panasonic IP-PBX. It explains how to programme this PBX using Web Maintenance Console. The PC Programming Manual is di… |
 |
[Page 3] Panasonic KX-NS500 Notice • During a long programming session, it is highly recommended that you periodically save the system data to the System Memory. If the PBX undergoes a sudden power failure or if the system is reset for some reason, all the system data in RAM … |
 |
[Page 4] Panasonic KX-NS500 Table of Contents 1 Overview …………………………………………………………………………………….13 1.1 Introduction …………………………………………………………………………………………….. |
 |
[Page 5] Panasonic KX-NS500 6.6 Tool—Export ……………………………………………………………………………………………………..86 6.7 Tool—Screen Customise ……………………………………………………………………………. |
 |
[Page 6] Panasonic KX-NS500 7.10.2 Utility—Automatic Two-way Recording—Extension Setting …………………………………..135 7.10.3 Utility—Automatic Two-way Recording—Extension Setting List …………………………….136 7.10.4 Utility—Automatic Two-w… |
 |
[Page 7] Panasonic KX-NS500 9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property ………..353 9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property — LCO type ………..358 9.24 PBX Configuration—[1-1] Configuration—Slot—Port Pr… |
 |
[Page 8] Panasonic KX-NS500 10.11.2 PBX Configuration—[2-11-2] System—Audio Gain—Card ……………………………………551 11 PBX Configuration—[3] Group …………………………………………………..553 11.1 PBX Configuration—[3-1] Group—Trunk… |
 |
[Page 9] Panasonic KX-NS500 12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND …………………..662 12.1.3 PBX Configuration—[4-1-3] Extension—Wired Extension—Speed Dial ………………….663 12.1.4 PBX Configuration—[4-1-4] Extension—W… |
 |
[Page 10] Panasonic KX-NS500 16.3 PBX Configuration—[8-3] ARS—Routing Plan Time ………………………………………….791 16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time Setting ……………………….792 16.4 PBX Configuration—[8-4] ARS—R… |
 |
[Page 11] Panasonic KX-NS500 24.2 UM Configuration—[5-2] System Parameters—Extension Group ……………………….944 24.3 UM Configuration—[5-3] System Parameters—System Caller Name Announcement ………………………………………………………………. |
 |
[Page 12] Panasonic KX-NS500 12 PC Programming Manual Table of Contents |
 |
[Page 13] Panasonic KX-NS500 Section 1 Overview This section provides an overview of programming the PBX. PC Programming Manual 13 |
 |
[Page 14] Panasonic KX-NS500 1.1 Introduction 1.1.1 For Your Safety To prevent personal injury and/or damage to property, be sure to observe the following safety precautions. The following symbols classify and describe the level of hazard and injury caused when this unit is op… |
 |
[Page 15] Panasonic KX-NS500 WARNING • Unplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised Panasonic Factory Service Centre. … |
 |
[Page 16] Panasonic KX-NS500 1.1.2 Introduction These programming instructions are designed to serve as an overall system programming reference for the PBX. Each feature in the PBX has default settings that can be changed to customise the PBX to your requirements. These setting… |
 |
[Page 17] Panasonic KX-NS500 1.1.3 Entering Characters The characters on a white background below can be used when storing a name, message, password or other text entry data using a PC. The available characters vary according to the model of PBX. Note For NE models, the tables … |
 |
[Page 18] Panasonic KX-NS500 Table 2 (For NE model) 18 PC Programming Manual 1.1.3 Entering Characters |
 |
[Page 19] Panasonic KX-NS500 Table 3 (For RU/UC model) PC Programming Manual 19 1.1.3 Entering Characters |
 |
[Page 20] Panasonic KX-NS500 Table 4 (For Greece) 20 PC Programming Manual 1.1.3 Entering Characters |
 |
[Page 21] Panasonic KX-NS500 1.2 PC Programming 1.2.1 Starting Web Maintenance Console System programming, diagnosis and administration can be performed with a PC using Web Maintenance Console. Web Maintenance Console is accessed through a Web browser running on a networked PC… |
 |
[Page 22] Panasonic KX-NS500 Recommended Specification RAM 2048 MB Hard Disk 10 GB available space Copyright for MD5 This software uses the Source Code of RSA Data Security, Inc. described in the RFC1321 (MD5 Message-Digest Algorithm). Copyright (C) 1991-2, RSA Data Security, In… |
 |
[Page 23] Panasonic KX-NS500 MNT Port connection: Launch your Web browser and in the address bar, enter one of the following addresses exactly as shown: – 223.0.0.1 or – http://kx-ns500. Note • If entering «http://kx-ns500.», be sure to include the period at the … |
 |
[Page 24] Panasonic KX-NS500 For more details, refer to «5.2 PC Connection—Connection via RMT Card (KX-TDA0196)» or «5.2 PC Connection—Connection via PRI Card (KX-NS5290CE)» in the Installation Manual. 2. Start the Off-line Web Maintenance launcher : An… |
 |
[Page 25] Panasonic KX-NS500 1.2.2 PC Programming Using Off-line Mode PC Programming is performed by connecting to the PBX using Web Maintenance Console, which is also known as On-line mode. However, as certain programming requires installed cards to be set to out of service (O… |
 |
[Page 26] Panasonic KX-NS500 Off-line Web Maintenance Console Programme Launcher Note Off-line Web Maintenance Console cannot be used when the PBX Web Manager for Unified PC Maintenance Console (for KX-TDA/KX-TDE/KX-NCP PBXs) is running on the PC. To disable the PBX Web Manager:… |
 |
[Page 27] Panasonic KX-NS500 Opening an Existing System Data File This operation will load a PBX settings system data file from your PC for programming in Off-line mode. The system data file can be a file created earlier using Off-line Web Maintenance Console, or a system data f… |
 |
[Page 28] Panasonic KX-NS500 VoIP Test Tool Click the VoIP Test Tool button to launch the VoIP Test Tool. This tool is identical to the VoIP Test Tool included with the Unified PC Maintenance Console for KX-TDA/KX-TDE/KX-NCP PBXs. IP Terminal Utility Click the IP Terminal button… |
 |
[Page 29] Panasonic KX-NS500 Uploading Programmed Settings to the PBX When programming in Off-line mode, clicking the icon will open a save dialogue box. Specify a location and file name for the system data file. This file can then be uploaded to the PBX in On-line mode using … |
 |
[Page 30] Panasonic KX-NS500 1.2.2.1 Editing and Printing Terminal Labels in Off-line Mode Follow the procedure below to print key label sheets for use with your system’s extensions and DSS consoles. 1. In On-line mode, export PBX system data to your PC, and then open the exp… |
 |
[Page 31] Panasonic KX-NS500 Section 2 Introduction of Web Maintenance Console This section serves as reference operating instructions when using Web Maintenance Console to programme the PBX. PC Programming Manual 31 |
 |
[Page 32] Panasonic KX-NS500 2.1 Introduction 2.1.1 Web Maintenance Console Accounts User account levels Access to Web Maintenance Console requires a login name and password, which are assigned to accounts in the PBX. Also, access to Web Maintenance Console is controlled by di… |
 |
[Page 33] Panasonic KX-NS500 Level Login Name Password Installer INSTALLER 4-16 character password, using a-z, A-Z, and 0-9 (case sensitive). For an initialised PBX that has not yet been set up, the default Installer level password is «1234». You will be prompted to ch… |
 |
[Page 34] Panasonic KX-NS500 2.1.2 Access Levels Access to menu options within Web Maintenance Console is restricted depending on the level of the account and the current programming mode (see Programming Modes in 1.1.2 Introduction). When a menu option is limited to certain a… |
 |
[Page 35] Panasonic KX-NS500 Menu Option Off-line On-line A I U A I Import®V-IPGW DN2IP ü ü Import®V-SIPGW Settings ü ü Import®V-SIPGW Provider ü ü Export®Feature — Speed Dial and Caller ID ü ü ü ü Export®Incoming Call — DDI/DID Table ü ü Expor… |
 |
[Page 36] Panasonic KX-NS500 Menu Option Off-line On-line A I U A I File View ü File Delete ü Message File Transfer PC to PBX ü Message File Transfer PBX to PC ü Error Log ü ü Syslog ü Web-MC Event Log ü ü UM System Log ü ISDN/QSIG Protocol Trace … |
 |
[Page 37] Panasonic KX-NS500 2.1.3 Logging in to Web Maintenance Console After establishing a connection to Web Maintenance Console (see 1.2.1 Starting Web Maintenance Console), the login window is displayed, and a login name and password must be entered. If this is the first … |
 |
[Page 38] Panasonic KX-NS500 2.1.4 Easy Setup Wizard In the Easy Setup Wizard, you will configure the mandatory settings required for the PBX. When you log in to Web Maintenance Console for a PBX that is in its initialised, factory default state, the Easy Setup Wizard for that … |
 |
[Page 39] Panasonic KX-NS500 2.1.5 Card Status Certain tools, utilities and settings require that the target card be set to out-of-service (OUS) or in-service (INS) status before the operation is carried out. Where required, this is noted in the description of each item. Card s… |
 |
[Page 40] Panasonic KX-NS500 2.1.6 Extension Number Setting Many screens within the Maintenance Console software allow you to select extensions as part of programming various features (for example, as members of a group). These screens use a standard window to make selecting mu… |
 |
[Page 41] Panasonic KX-NS500 2.2 Logout To logout of Web Maintenance Console, click the button to end the programming session and return to the Login screen. When this option is chosen, system data is automatically saved from the temporary memory (DRAM) of the PBX to the Syst… |
 |
[Page 42] Panasonic KX-NS500 2.3 Frequently Asked Questions (FAQ) This section provides answers to some common questions about using the Maintenance Console software to programme the PBX. The information is divided into the following topics: Title Description Connection Connect… |
 |
[Page 43] Panasonic KX-NS500 Card Status Q The status of a new card will not change to «INS». A • With the new card installed, does the total number of extensions or trunks exceed the maximum supported by the PBX? • Is the type of card installed in the slot differe… |
 |
[Page 44] Panasonic KX-NS500 A • The Portable Station can be forcibly de-registered by following the procedure shown in Forced De-registration of 9.34 PBX Configuration—[1-2] Configuration—Portable Station. Q I changed the extension number of a Portable Station, but the … |
 |
[Page 45] Panasonic KX-NS500 A • Select 3-digits for default value of Numbering Plan in the Easy Setup Wizard. If you want to change to a 3-digit extension numbering plan after the PBX system is already running using a 4-digit extension numbering plan, follow the procedure bel… |
 |
[Page 46] Panasonic KX-NS500 Q When modifying the Numbering Plan, how do I set a 1-digit extension number? A • Perform the following steps: 1. Clear the Leading Number cell. 2. Click Apply. 3. Set No. of Additional Digits to «None». 4. Click Apply. 5. Enter the des… |
 |
[Page 47] Panasonic KX-NS500 A • It is not possible to use the same number for 2 items. The number you are trying to store cannot be used if it is already being used by: • A feature number • An extension • A Dial setting (see 17.1 PBX Configuration—[9-1] Private Netw… |
 |
[Page 48] Panasonic KX-NS500 Setting Features Q How do I change the dialling mode of an analogue trunk? A • From the 9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property — LCO Port screen, change the Dialling Mode setting of the target port to «DTMF»… |
 |
[Page 49] Panasonic KX-NS500 A • Perform the following steps: 1. On the 11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings screen, enter the floating extension number you chose for the ICD group in the Floating Extension Number cell…. |
 |
[Page 50] Panasonic KX-NS500 50 PC Programming Manual 2.3 Frequently Asked Questions (FAQ) |
 |
[Page 51] Panasonic KX-NS500 Section 3 Web Maintenance Console Home Screen This section explains how to setup the main PBX and other connected PBXs from the Home Screen of Web Maintenance Console. PC Programming Manual 51 |
 |
[Page 52] Panasonic KX-NS500 3.1 Home Screen When you log in to Web Maintenance Console, the home screen is displayed. For information about connecting to Web Maintenance Console and logging in, see 1.2.1 Starting Web Maintenance Console. The home screen of Web Maintenance Con… |
 |
[Page 53] Panasonic KX-NS500 3. Web Maintenance Console Features Clicking these buttons provides features for Web Maintenance Console, as follows: Button Description Save Data Clicking this button will save any changes made to settings to the System Memory. Programming changes t… |
 |
[Page 54] Panasonic KX-NS500 Maintenance Screen Tree View Items Item Primary Functions Status • Check the status of the PBX’s system hardware • Check the status of PBX equipment (PSs, CSs, etc.) • Check the status of extensions used by the Unified Messaging system For de… |
 |
[Page 55] Panasonic KX-NS500 The standard buttons are as follows: Button Function OK Temporarily implements changes to the system’s memory (DRAM) and closes the current screen. Cancel Abandons changes and closes the current screen. Apply Temporarily implements changes to the s… |
 |
[Page 56] Panasonic KX-NS500 56 PC Programming Manual 3.1 Home Screen |
 |
[Page 57] Panasonic KX-NS500 Section 4 Status This section serves as reference operating instructions for the Status menu of the Maintenance screen of Web Maintenance Console. PC Programming Manual 57 |
 |
[Page 58] Panasonic KX-NS500 4.1 Status—Equipment Status 4.1.1 Status—Equipment Status—UPS Information is provided about the status of the UPS device and the connection to the PBX • UPS Connection Status Displays if the UPS system is connected or not connected. If a UP… |
 |
[Page 59] Panasonic KX-NS500 4.1.2 Status—Equipment Status—CS Information Displays information stored by the PBX regarding each Cell Station (CS). This option is only available for the Installer level account in On-line mode and requires that the target V-IPCS4 card be set … |
 |
[Page 60] Panasonic KX-NS500 4.1.3 Status—Equipment Status—PS Information Displays Portable Station (PS) registration information, including the associated Cell Station (CS). This option is only available for the Installer level account in On-line mode. The displayed items … |
 |
[Page 61] Panasonic KX-NS500 4.1.4 Status—Equipment Status—UM Port status The UM Port status screen displays each port’s status and number for the Unified Messaging system. The screen will be updated every 30 seconds. Each port’s status will be displayed in one of the f… |
 |
[Page 62] Panasonic KX-NS500 4.1.5 Status—Equipment Status—USB USB Mount Status indicates if a USB memory device is connected to the PBX. There is also an Unmount button. • Mounted: A USB memory device is connected to the PBX. Before removing the USB memory device from th… |
 |
[Page 63] Panasonic KX-NS500 Section 5 System Control This section serves as reference operating instructions for the System Control menu of the Maintenance screen when programming using Web Maintenance Console. PC Programming Manual 63 |
 |
[Page 64] Panasonic KX-NS500 5.1 System Control—Program Update The programme files for the following hardware components can be updated with the Program Update feature. Each file must be named as indicated in the table to be recognised by the KX-NS500. Hardware that can be up… |
 |
[Page 65] Panasonic KX-NS500 5.1.1 System Control—Program Update—Download Program File Software updates for PBX hardware components can be downloaded to the PBX. Manual and automatic methods are available. Programme downloading can be performed only in On-line mode. Note �… |
 |
[Page 66] Panasonic KX-NS500 • Check only: The specified download server is checked at the specified times. If an e-mail is entered in Email notification, an e-mail notification is sent when updated files have been discovered. Note If Check only is selected, updated files will… |
 |
[Page 67] Panasonic KX-NS500 5.1.2 System Control—Program Update—Update Program File Once updated programme files have been downloaded and are stored on a PBX, they can be used to update the system files of the PBX. The update process can be set to be automatically performe… |
 |
[Page 68] Panasonic KX-NS500 5.1.3 System Control—Program Update—Plug and Update The Plug and Update feature allows IP-PTs to be automatically updated to the latest software version when they are registered to the PBX. When Plug and Update is enabled, the version number of … |
 |
[Page 69] Panasonic KX-NS500 5.2 System Control—MOH 5.2.1 System Control—MOH—Install Sound files on the programmer’s PC can be installed to each PBX for use as Music on Hold (MOH). This screen can be accessed only in On-line mode. 1. Click Browse and select a WAV file … |
 |
[Page 70] Panasonic KX-NS500 5.2.2 System Control—MOH—Delete MOH files that are occupying BGM numbers can be deleted. This screen can be accessed only in On-line mode. 1. In BGM No., specify the BGM numbers to delete MOH files from. Specify «All» to delete the dat… |
 |
[Page 71] Panasonic KX-NS500 5.2.3 System Control—MOH—Status / Backup MOH files stored on a PBX can be downloaded to the user’s PC. This screen can be accessed only in On-line mode. 1. The MOH files saved to the PBX will be listed. Click Backup for the file you would like… |
 |
[Page 72] Panasonic KX-NS500 5.3 System Control—System Reset When programming changes or other changes to PBX settings require a system reset, this command allows a reset to be performed remotely from Web Maintenance Console. When the system is reset, any settings not saved t… |
 |
[Page 73] Panasonic KX-NS500 5.4 System Control—System Shutdown In order to turn off the power to a PBX, it must first be issued a shutdown command using Web Maintenance Console. Follow the procedure below to prepare a PBX for system shutdown. When the system is shut down, an… |
 |
[Page 74] Panasonic KX-NS500 74 PC Programming Manual 5.4 System Control—System Shutdown |
 |
[Page 75] Panasonic KX-NS500 Section 6 Tool This section serves as reference for the Tool menu of the Maintenance screen of Web Maintenance Console. PC Programming Manual 75 |
 |
[Page 76] Panasonic KX-NS500 6.1 Tool—System Data Backup 6.1.1 Tool—System Data Backup—Backup to USB A PBX’s system data can be backed up to a USB memory device inserted into the PBX’s USB port. At a later time, the USB memory device can be used to restore the backed… |
 |
[Page 77] Panasonic KX-NS500 • The USB memory device is removed from the USB port of the PBX during the restoration process. • The following characters cannot be used in the names of the backup files: open bracket, close bracket, space, forward slash («/»), period … |
 |
[Page 78] Panasonic KX-NS500 6.2 Tool—NDSS Link Data Clear Clears NDSS Link Data stored in the connected PBX. While this tool clears both monitor extension and monitored extension data, it only clears it at the connected PBX. To clear this data at other PBXs in the QSIG netwo… |
 |
[Page 79] Panasonic KX-NS500 6.3 Tool—Call Pickup for My Group Allows you to automatically configure settings in 10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial and 12.1.3 PBX Configuration—[4-1-3] Extension—Wired Extension—Speed Dial so that u… |
 |
[Page 80] Panasonic KX-NS500 6.4 Tool—Extension List View Displays a list of all programmed extension numbers and types. It is possible to sort the information according to Extension Number, Type, Extension Name, Shelf, Slot, or Port. There is also a key-word searching featur… |
 |
[Page 81] Panasonic KX-NS500 6.5 Tool—Import Allows several types of system data files or tables to be imported. Except for Speed Dial and Caller ID, this option is only available at Installer level. The files from which data can be imported are files that were previously sav… |
 |
[Page 82] Panasonic KX-NS500 Related programming: 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table ARS — Leading Digit Data Type Import Destination Location Location Leading Number Leading Digit Additional Number of Digits Additional Dial Digits Routing … |
 |
[Page 83] Panasonic KX-NS500 Quick Dial* Data Type Import Destination No. Location Dial Dial Phone Number Phone Number Related programming: 10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial SIP Extension Data Type Import Destination No. Location Extension … |
 |
[Page 84] Panasonic KX-NS500 Data Type Import Destination T38 FAX Max Datagram T38 FAX Max Datagram T38 FAX UDPTL Error Correction – Redundancy T38 FAX UDPTL Error Correction – Redundancy T38 FAX UDPTL Redundancy count for T.30 messages T38 FAX UDPTL Redundancy count for T.3… |
 |
[Page 85] Panasonic KX-NS500 Note Before importing PS registration settings, be sure to de-register any PSs already registered to the KX-NS500 PBX. To import system data 1. From the Tool tree menu, select Import, and then click the type of data to import. 2. Navigate to the fold… |
 |
[Page 86] Panasonic KX-NS500 6.6 Tool—Export Allows several types of system data to be exported to files. These files can be used with the Import tool (see 6.5 Tool—Import) to update another PBX. Except for ARS — Routing Plan, tables are exported as comma-separated value (… |
 |
[Page 87] Panasonic KX-NS500 6.7 Tool—Screen Customise Allows you to specify which Setup and Maintenance screens can be accessed in the User (Administrator) account level. This option is only available at Installer level. Selected check boxes will be displayed in the tree men… |
 |
[Page 88] Panasonic KX-NS500 6.8 Tool—UM Data Backup The UM Data Backup tool can be used to backup and restore Unified Messaging (UM) data. This screen can be accessed only in On-line mode. The following voice data can be backed up or restored as individual files. The data ca… |
 |
[Page 89] Panasonic KX-NS500 6.8.1 Tool—UM Data Backup—Manual Backup Use this procedure to manually back up Unified Messaging system data. For details on the items that can be backed up, see 6.8 Tool—UM Data Backup. 1. To back up system prompts, select the check box next… |
 |
[Page 90] Panasonic KX-NS500 6.8.2 Tool—UM Data Backup—Scheduled Backup You can schedule backups in advance. The Unified Messaging system will automatically back up the selected data at the scheduled times to a USB memory device or NAS connected to the PBX. (Scheduled backu… |
 |
[Page 91] Panasonic KX-NS500 6.9 Tool—UM Data Restore Follow the procedure below to restore data backed up using the UM Data Backup tool. This screen can be accessed only in On-line mode. For more information about the UM Data Backup tool, see 6.8 Tool—UM Data Backup. You … |
 |
[Page 92] Panasonic KX-NS500 • The following characters cannot be used in the names of the backup files: open bracket, close bracket, space, forward slash («/»), period («.»), or 0 (zero). • The backup file names stored on the USB memory device should not… |
 |
[Page 93] Panasonic KX-NS500 6.10 Tool—UM Backup History The following records for backup that have been performed can be checked on this screen: • Description • Parameters • Completion Status • Date & Time • Total Elapsed Time (HH:MM:SS) This screen can be acce… |
 |
[Page 94] Panasonic KX-NS500 6.11 Tool—DXDP All OUS Sets the status of all DXDP/XDP extension ports to «OUS» simultaneously for the PBX. To set all DXDP/XDP ports to OUS for the PBX 1. Access Tool—DXDP All OUS from the Maintenance Screen tree view. 2. Click OK. 94… |
 |
[Page 95] Panasonic KX-NS500 6.12 Tool—Contact information Dealers can set contact information for the user of the PBX here. When users select this tree menu item, this information will be displayed for the user’s reference. 1. Input the following information, and then clic… |
 |
[Page 96] Panasonic KX-NS500 6.13 Tool—UT Option Setting Option settings can be specified for KX-UT series SIP phones on a system-wide level. Note The following apply when programming in On-line mode only: • To set these parameters, all installed V-UTEXT32 cards must first … |
 |
[Page 97] Panasonic KX-NS500 6.14 Tool—URL Information The URL address for downloading the IMAP tool can be specified on this screen. This URL address will be used for the Unified Messaging Plug in download button displayed to users when they view the Unified Message tab of t… |
 |
[Page 98] Panasonic KX-NS500 6.15 Tool—SVM (Simplified Voice Message) 6.15.1 Tool—SVM (Simplified Voice Message)—Delete All Recording Deletes all voice messages recorded by the SVM feature. To delete SVM recording data 1. Access Tool—SVM (Simplified Voice Message)—De… |
 |
[Page 99] Panasonic KX-NS500 Section 7 Utility This section serves as reference operating instructions for the Utility menu of the Maintenance screen of Web Maintenance Console. PC Programming Manual 99 |
 |
[Page 100] Panasonic KX-NS500 7.1 Utility—Diagnosis 7.1.1 Utility—Diagnosis—Card Diagnosis Performs diagnostic tests on cards installed in the PBX, to identify the source of problems. If any of the tests listed here returns the result «NG» («No Good»),… |
(Ocr-Read Summary of Contents of some pages of the Panasonic KX-NS500 Document (Main Content), UPD: 12 March 2023)
-
335, 9.19 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Card Property Various settings can be programmed for V-UTEXT32 cards. Click Common Settings to change these settings. Main Echo Cancellation Ability Specifies the echo canceller ability time. Value Range OFF, 24 ms, 128 ms Maintenance Console Location 9.19 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Card Property DSP Digit…
-
177, Value Range 0–300 Maintenance Console Location 9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main PC Programming Manual References 9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property—Option— System Speed Dial Download System Status CPU Usage Displays the system CPU’s current processor load, expressed as a percentage of total capacity (reference only). …
-
288, Panasonic KX-NS500 Maintenance Console Location 9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property Maximum Bit Rate Specifies the maximum bit rate of the fax signal. Value Range No Speed Limit, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 12000 bps, 14400 bps Maintenance Console Location 9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property DTMF Specifies the type of DTMF tone to be sent out. Value Range Inband, Outband (RFC2833), Ou…
-
906, Value Range Primary, Guidance No. 1–8 Maintenance Console Location 22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group PC Programming Manual References 24.4 UM Configuration—[5-4] System Parameters—Parameters—Prompt Setting— Primary Language Feature Guide References 3.2.1.41 System Prompts Day, Night, Lunch, and Break Mode — Delayed Answer Time Specifies whether the Unified Messaging system answers calls on the port or trunk immediately (0) or after a dela…
-
1023, • 27.2.5 Network Service—[2-6] Server Feature—SMTP Feature Guide References 5.4.2 E-mail Notification of System-level Events Emergency Call • 15.4 PBX Configuration—[7-4] TRS—Emergency Dial Feature Guide References 2.5.4.2 Emergency Call Enhanced Walking Extension • 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features— Walking Extension Feature Guide References 2.24.3.2 Enhanced Walking Extension Executi…
-
304, Panasonic KX-NS500 2. Highlight numbers and names and click the right arrow to select them for forced de-registration. Click Next. A dialogue box will appear. 3. Click OK. A dialogue box will appear. 4. Click Confirm. If the de-registration is successful, the dialogue box will show «Forced De-registration Succeed». 5. Click Close. Once the IP-PT is successfully de-registered, the status of the IP-PT will update …
-
1060, Feature Guide References 2.28.1 Voice Mail (VM) Group 3.1.1 Unified Messaging System Overview—UM Ports and the UM Group Voice Mail DPT (Digital) Integration • 10.3 PBX Configuration—[2-3] System—Timers & Counters— Recall—Transfer Recall (s) • 11.11.1 PBX Configuration—[3-11-1] Group—VM (DPT) Group—System Settings • 11.11.2 PBX Configuration—[3-11-2] Group—VM (DPT) Group—Unit Settings • 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extens…
-
112, 7.3.4 Utility—Log—UM System Log You can export a log of events from the Unified Messaging system for troubleshooting purposes. This screen can be accessed only in On-line mode. 1. Click OK to export a UM System Log file. 2. Click Save to save the data to a local file. 3. Click OK. 112 PC Programming Manual 7.3.4 Utility—Log—UM System Log
… -
107, 7.2.6 Utility—File—Message File Transfer PBX to PC Transfers Outgoing Message (OGM) files from the System Memory to the PC. This option is only available at Installer level when programming in On-line mode. To transfer OGMs to the PC 1. From the lower drop-down list, select the messages to transfer. • To transfer a certain message, select the number of that message. • To transfer all messages at once, select «ALL». Th…
-
514, 10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others Different ring tone patterns can be selected for incoming intercom calls and ringing triggered by certain PBX features (Timed Reminder, Call Back, and Live Call Screening). A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern table can be selected for use by an extension. For more information on ring tone patterns, see &q…
-
681, Value Range Portable Station Maintenance Console Location 12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings User Group Specifies the extension user group to which the PS belongs. The extension user group is used to compose tenants, call pickup groups and paging groups. Value Range 1–32 Maintenance Console Location 12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings Feature Guide References 5.1.2 Group 5.1.3 Tenant S…
-
201, Value Range 1024–65535 Maintenance Console Location 9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site PC Programming Manual References 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 9— Built-in Communication Assistant 12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 9— Built-in Communication Assistant …
-
631, Panasonic KX-NS500 DPT (S-DPT): Digital XDP port of DPT port (DLC) ISDN: ISDN port (PRI) IP-EXT: IP-Extension port (V-IPEXT) SIP: General SIP Extension port (V-SIPEXT) SIP-MLT: KX-UT series SIP phone/S-PS/SIP-CS Extension port (V-UTEXT) UM: Unified Messaging System Extension port Maintenance Console Location 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings Telephone Type Indicates the type of telephone connected to…
-
836, PC Programming Manual References 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR— Print Information—Outgoing Call Feature Guide References 2.22.1.1 Station Message Detail Recording (SMDR) Option—Condition Code «RC» Specifies whether the time of receiving an incoming trunk call is printed. Value Range No Print, Print Maintenance Console Location 19.1 PBX Configuration—[11-1] Maintenance—Main Fe…
-
220, Maintenance Console Location 9.2.3 PBX Configuration—[1-1] Configuration—Slot—System Property—Slot Summary PC Programming Manual References 9.1 PBX Configuration—[1-1] Configuration—Slot Version Indicates the software version of the installed card (reference only). Value Range Version number Maintenance Console Location 9.2.3 PBX Configuration—[1-1] Configuration—Slot—System Property—Slot Summary PC Programming Manual References 9.1 PBX Configuration—[1-1] Configuratio…
-
1064, 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Web Site: http://www.panasonic.net/ Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd. , and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the wri tten consent of Panasonic System Networks Co., Ltd. Panasonic System Networks Co., Ltd. 2014 PNQX6305ZA CC0114AH0
…