Nissan cube z12 руководство по эксплуатации

Пытаюсь найти сервис мануал на Ниссан Лафеста, но пока бесплатно нигде не найду.Мимоходом нашёлся сервис мануал на 12 Куб.Не знаю куда пристроить .Может кто поделится с одноклубниками.Мануал на английском.Полно всякой инфы, включая самодиагностику, различные тесты, схемы и так далее.Переводится Гуглом легко.Правда ориентироваться сложновато.
Может кому на Лафесту такой попадётся.Дайте знать.
Делай добро и бросай его в воду…
yadi.sk/d/13eUcai_3Rt9Cn

Foreword

Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control.

This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. Please read through this manual before operating your vehicle.

A separate Warranty Information Booklet explains details about the warranties covering your vehicle. The NISSAN Service and Maintenance Guide explains details about maintaining and servicing your vehicle. Additionally, a separate Customer Care/Lemon Law Booklet (U.S. only) will explain how to resolve any concerns you may have with your vehicle, as well as clarify your rights under your state’s lemon law.

Your NISSAN dealer knows your vehicle best. When you require any service or have any questions, we will be glad to assist you with the extensive resources available to us.

READ FIRST — THEN DRIVE SAFELY

Before driving your vehicle, read your Owner’s Manual carefully. This will ensure familiarity with controls and maintenance requirements, assisting you in the safe operation of your vehicle.

WARNING

IMPORTANT SAFETY INFORMATION REMINDERS FOR SAFETY!

Follow these important driving rules to help ensure a safe and comfortable trip for you and your passengers!

. NEVER drive under the influence of alcohol or drugs.

. ALWAYS observe posted speed limits and never drive too fast for conditions.

. ALWAYS give your full attention to driving and avoid using vehicle features or taking other actions that could distract you.

. ALWAYS use your seat belts and appropriate child restraint systems. Pre-teen children should be seated in the rear seat.

. ALWAYS provide information about the proper use of vehicle safety features to all occupants of the vehicle.

. ALWAYS review this Owner’s Manual for important safety information.

MODIFICATION OF YOUR VEHICLE

This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems resulting from modification may not be covered under NISSAN warranties.

WHEN READING THE MANUAL

This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle.

All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design at any time without notice.

IMPORTANT INFORMATION ABOUT THIS MANUAL

You will see various symbols in this manual. They are used in the following ways:

WARNING

This is used to indicate the presence of a hazard that could cause death or serious personal injury. To avoid or reduce the risk, the procedures must be followed precisely.

CAUTION

This is used to indicate the presence of a hazard that could cause minor or moderate personal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully.

SIC0697

If you see the symbol above, it means “Do not do this” or “Do not let this happen”.

If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle.

Arrows in an illustration that are similar to those above indicate movement or action.

Arrows in an illustration that are similar to those above call attention to an item in the illustration.

CALIFORNIA PROPOSITION 65 WARNING

WARNING

Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

CALIFORNIA PERCHLORATE ADVISORY

Some vehicle parts, such as lithium batteries, may contain perchlorate material. The following advisory is provided: “Perchlorate Material — special handling may apply, See www.dtsc.ca.gov/ hazardouswaste/perchlorate.”

However, if there is something that your NISSAN dealer cannot assist you with or you would like to provide NISSAN directly with comments or questions, please contact the NISSAN Consumer Affairs Department using our toll-free number:

For U.S. customers 1-800-NISSAN-1 (1-800-647-7261)

For Canadian customers 1-800-387-0122

The Consumer Affairs Department will ask for the following information:

—Your name, address, and telephone number

—Vehicle identification number (attached to the top of the instrument panel on the driver’s side)

—Date of purchase

—Current odometer reading

—Your NISSAN dealer’s name

—Your comments or questions

OR

You can write to NISSAN with the information at:

For U.S. customers

Nissan North America, Inc. Consumer Affairs Department P.O. Box 685003

Franklin, TN 37068-5003

For Canadian customers Nissan Canada Inc. 5290 Orbitor Drive

Mississauga, Ontario L4W 4Z5

Seats, seat belts and Supplemental Restraint

System (SRS) …………………………………………… 0-2 Exterior front …………………………………………….. 0-3 Exterior rear ……………………………………………… 0-4 Exterior (Kro¯m models) …………………………………. 0-5 Passenger compartment ……………………………….. 0-6

1.Hood (P.3-21)

2.Headlights and turn signal lights

—Switch operation (P.2-23)

—Bulb replacement (P.8-26)

3.Windshield wiper and washer

—Switch operation (P.2-20)

—Blade replacement (P.8-17)

—Window washer fluid (P.8-12)

4.Outside mirrors (P.3-27)

5.Power windows (P.2-36)

1.Rear window wiper and washer

—Switch operation (P.2-22)

—Window washer fluid (P.8-12)

2.High-mounted stop light

—Bulb replacement (P.8-27)

3.Antenna (P.4-42)

—Satellite radio antenna* (P.4-14)

0-4 Illustrated table of contents

4.Rear window defroster (P.2-23)

5.Back door (P.3-22)

—Intelligent Key system* (P.3-10)

6.Rear combination lights

—Bulb replacement (P.8-27)

7.Rearview camera* (P.4-2)

8.Spare tire (under the vehicle) (P.6-4)

7.Vehicle Dynamic Control (VDC) OFF switch (P.5-28)

8.Tilting steering wheel lever (P.3-25)

9.Steering-wheel-mounted controls (left side)*

—Audio control* (P.4-41)

—Bluetooth® Hands-Free Phone System control* (P.4-44)

10.Steering-wheel-mounted controls (right side)*

—Cruise control switches* (P.5-20)

11.Selector lever or Shift lever

—Continuously Variable Transmission (CVT) (P.5-14)

—Manual Transmission (MT) (P.5-18)

12.Parking brake (P.5-20)

*: if so equipped

Illustrated table of contents 0-7

INSTRUMENT PANEL

0-8 Illustrated table of contents

11.Push-button ignition switch (models with Intelligent Key system) (P.5-9)

12.Heater and air conditioner* control (P.4-6)

— Rear window and outside mirror* defroster switch (P.2-23)

13.Utility hooks* (P.2-35)

14.iPod® connector* (P.4-15)/USB connector* (P.4-17)

15.Power outlet (P.2-31)

16.Glove box (P.2-33)

*: if so equipped

METERS AND GAUGES

— Outside air temperature* (P.2-7)

4.Fuel gauge (P.2-7)

9.RESET switch for trip odometer (P.2-5)/Trip computer mode switch (P.2-8)

*: if so equipped

Illustrated table of contents 0-9

MR18DE ENGINE*

1.Engine oil filler cap (P.8-9)

2.Brake and clutch (*1) fluid reservoir (P.8-11)

3.Air cleaner (P.8-16)

4.Battery (P.8-13)

— Jump starting (P.6-8)

0-10 Illustrated table of contents

5.Window washer fluid reservoir (P.8-12)

6.Engine drive belt location (P.8-15)

7.Engine oil dipstick (P.8-9)

8.Engine coolant reservoir (P.8-8)

9.Radiator filler cap (P.8-7)

— Vehicle overheat (P.6-11)

10.Fuse/fusible link holder (P.8-20)

Seats …………………………………………………….. 1-2 Front seats …………………………………………… 1-3 Rear seats (if so equipped) ………………………… 1-4 Head restraints ………………………………………. 1-6 Adjustable headrests (if so equipped) …………….. 1-9 Armrest (if so equipped) ………………………….. 1-12

Seat belts ……………………………………………… 1-12 Precautions on seat belt usage ………………….. 1-12 Child safety ………………………………………… 1-15 Pregnant women…………………………………… 1-16 Injured persons…………………………………….. 1-16 Three-point type seat belt ………………………… 1-16 Seat belt extenders………………………………… 1-22 Seat belt maintenance…………………………….. 1-22

Child restraints ………………………………………… 1-23 Precautions on child restraints……………………. 1-23 Lower Anchors and Tethers for CHildren System (LATCH) (except for Cargo Van models) ………… 1-24 Top tether strap child restraint……………………. 1-26

Child restraint installation using LATCH

(except for Cargo Van models) …………………… 1-28 Child restraint installation using the seat belts….. 1-33 Booster seats………………………………………….. 1-39 Precautions on booster seats…………………….. 1-39

Booster seat installation on front passenger seat

and rear seat……………………………………….. 1-41 Supplemental restraint system ……………………….. 1-44 Precautions on supplemental restraint system ….. 1-44

NISSAN Advanced Air Bag System

(front seats) ………………………………………… 1-50 Front seat-mounted side-impact supplemental

air bag and roof-mounted curtain side-impact supplemental air bag systems ……………………. 1-54 Seat belts with pretensioners (front seats) ……… 1-56 Supplemental air bag warning labels…………….. 1-57 Supplemental air bag warning light………………. 1-57 Repair and replacement procedure………………. 1-58

1-2 Safety — Seats, seat belts and supplemental restraint system

. The seatback should not be reclined any more than needed for comfort. Seat belts are most effective when the passenger sits well back and straight up in the seat. If the seatback is reclined, the risk of sliding under the lap belt and being injured is increased.

CAUTION

When adjusting the seat positions, be sure not to contact any moving parts to avoid possible injuries and/or damage.

SSS0792

SSS0793

Seat lifter (for driver’s seat):

Pull up or push down the adjusting lever to adjust the seat height until the desired position is achieved.

REAR SEATS (if so equipped)

Forward and backward

Pull the lever *1 up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position.

Reclining

To recline the seatback, pull the strap *2 and lean back. To bring the seatback forward, pull the strap up and lean your body forward. Release the strap to lock the seatback in position.

The reclining feature allows adjustment of the

seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. (See “PRECAUTIONS ON SEAT BELT USAGE” later in this section.)

Folding

Before folding the rear seats:

. Secure the seat belts on the seat belt hooks on the side wall. (See “Seat belt hooks (except for Cargo Van models)” later in this section.)

. Release the connector tongue of the rear center seat belt from the buckle, and secure the connector and seat belt tongues on the seat belt hook. (See “Rear center seat belt

SSS0987

. Stow seat belt buckles by pushing the seat belt buckles into seat pockets.

The seat belt buckles should only be stowed when the rear seat is folded. The rear seat belt buckles should be in the unstowed position at all other times.

Safety — Seats, seat belts and supplemental restraint system 1-5

SSS1019

The illustration shows the seating positions equipped with head restraints. The head restraints are adjustable.

Indicates the seating position is equipped with a head restraint.

SSS0994

To lower, push and hold the lock knob and push the head restraint down.

SSS0995

Removal

Use the following procedure to remove the adjustable head restraints.

1.Pull the head restraint up to the highest position.

2.Push and hold the lock knob.

3.Remove the head restraint from the seat.

4.Store the head restraint properly in a secure place so it is not loose in the vehicle.

5.Reinstall and properly adjust the head restraint before an occupant uses the seating position.

SSS0996

Install

1.Align the head restraint stalks with the holes in the seat. Make sure that the head restraint

is facing the correct direction. The stalk with the adjustment notches *1 must be installed in the hole with the lock knob *2 .

2.Push and hold the lock knob and push the head restraint down.

3.Properly adjust the head restraint before an occupant uses the seating position.

SSS0508

Front-seat Active Head Restraints

The Active Head Restraint moves forward utilizing the force that the seatback receives from the occupant in a rear-end collision. The movement of the head restraint helps support the occupant’s head by reducing its backward movement and helping absorb some of the forces that may lead to whiplash-type injuries.

Active Head Restraints are effective for collisions at low to medium speeds in which it is said that whiplash injury occurs most.

Active Head Restraints operate only in certain rear-end collisions. After the collision, the head restraints return to their original positions.

Properly adjust the Active Head Restraints as described in this section.

ADJUSTABLE HEADRESTS (if so equipped)

WARNING

The adjustable headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end collisions. Adjust the headrest properly, as specified in this section. Check the adjustment after someone else uses the seat. Do not attach anything to the adjustable headrest stalks or remove the adjustable headrest. Do not use the seat if the adjustable headrest has been removed. If the adjustable headrest was removed, reinstall and properly adjust the headrest before an occupant uses the seating position. Failure to follow these instructions can reduce the effectiveness of the adjustable headrests. This may increase the risk of serious injury or death in a collision.

SSS1048

The illustration shows the seating positions equipped with adjustable headrests.

Indicates the seating position is equipped with an adjustable headrest.

SSS1036

To lower, push and hold the lock knob and push the headrest down.

SSS1037

Removal

Use the following procedure to remove the adjustable headrests.

1.Pull the headrest up to the highest position.

2.Push and hold the lock knob.

3.Remove the headrest from the seat.

4.Store the headrest properly in a secure place so it is not loose in the vehicle.

5.Reinstall and properly adjust the headrest before an occupant uses the seating position.

SSS1038

Install

1.Align the headrest stalks with the holes in the seat. Make sure that the headrest is

facing the correct direction. The stalk with the adjustment notch *1 must be installed in the hole with the lock knob *2 .

2.Push and hold the lock knob and push the headrest down.

3.Properly adjust the headrest before an occupant uses the seating position.

SSS0970

ARMREST (if so equipped)

Front

Pull the armrest down until it is horizontal.

SSS0963

Rear

Pull the armrest down until it is horizontal.

SEAT BELTS

PRECAUTIONS ON SEAT BELT USAGE

If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up every time you drive, even if your seating position includes a supplemental air bag.

Most U.S. states and Canadian provinces or territories specify that seat belts be worn at all times when a vehicle is being driven.

1-14 Safety — Seats, seat belts and supplemental restraint system

activated, it cannot be reused and must be replaced together with the retractor. See a NISSAN dealer.

. Removal and installation of the pretensioner system components should be done by a NISSAN dealer.

. All seat belt assemblies, including retractors and attaching hardware, should be inspected after any collision by a NISSAN dealer. NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the collision was minor and the belts show no damage and continue to operate properly. Seat belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted.

. All child restraints and attaching hardware should be inspected after any collision. Always follow the restraint manufacturer’s inspection instructions and replacement recommendations. The child restraints should be replaced if they are damaged.

CHILD SAFETY

Children need adults to help protect them. They need to be properly restrained.

In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations. Every child is different, so be sure to learn the best way to transport your child.

There are three basic types of child restraint systems:

. Rear-facing child restraint

. Front-facing child restraint

. Booster seat

The proper restraint depends on the child’s size. Generally, infants (up to about 1 year and less than 20 lb (9 kg)) should be placed in rearfacing child restraints. Front-facing child restraints are available for children who outgrow rear-facing child restraints and are at least 1 year old. Booster seats are used to help position a vehicle lap/shoulder belt on a child who can no longer use a front-facing child restraint.

WARNING

Infants and children need special protection. The vehicle’s seat belts may not

Safety — Seats, seat belts and supplemental restraint system 1-15

1-16 Safety — Seats, seat belts and supplemental restraint system

properly.

Fastening the seat belts

1.Adjust the seat. (See “SEATS” earlier in this section.)

2.Make sure rear seat belt buckles are removed from the stowed position. See “Rear seat belt buckles (except for Cargo Van models)” later in this section.

SSS0292

3.Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage.

. The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the belt to move and allows you some freedom of movement in the seat.

. If the seat belt cannot be pulled from its fully retracted position, firmly pull the belt and release it. Then smoothly pull the belt out of the retractor.

Safety — Seats, seat belts and supplemental restraint system 1-17

1-18 Safety — Seats, seat belts and supplemental restraint system

tiveness of the entire restraint system and increase the chance or severity of injury in an accident.

Checking seat belt operation

Seat belt retractors are designed to lock seat belt movement by two separate methods:

. When the belt is pulled quickly from the retractor.

. When the vehicle slows down rapidly.

To increase your confidence in the seat belts, check the operation as follows:

. Grasp the shoulder belt and pull forward quickly. The retractor should lock and restrict further belt movement.

If the retractor does not lock during this check or if you have any question about seat belt operation, see a NISSAN dealer.

SSS0351A

Shoulder belt height adjustment (for front seats)

The shoulder belt anchor height should be adjusted to the position best for you. (See “PRECAUTIONS ON SEAT BELT USAGE” earlier in this section.)

To adjust, pull the adjustment button *1 , and then move the shoulder belt anchor to the desired position *2 , so that the belt passes over the center of the shoulder. The belt should be away from your face and neck, but not falling off of your shoulder. Release the adjustment button to lock the shoulder belt anchor into position.

WARNING

. After adjustment, release the adjustment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position.

. The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident.

SSS0964

Seat belt hooks (except for Cargo Van models)

When the rear seat belts are not in use and when folding down the rear seats, hook the rear outer seat belts on the seat belt hooks.

The hook for the rear center seat belt is located on the left wall behind the rear seat. (See “Rear center seat belt (except for Cargo Van models)” later in this section for details.)

SSS0391

Rear center seat belt (except for Cargo Van models)

The rear center seat belt has a connector tongue *1 and a seat belt tongue *2 . Both the connector tongue and the seat belt tongue must be securely latched for proper seat belt operation.

SSS0241

WARNING

. Always fasten the connector tongue and the seat belt in the order shown.

. Always make sure both the connector tongue and the seat belt tongue are secured when using the seat belt or installing a child restraint. Do not use the seat belt or child restraint with only the seat belt tongue attached. This could result in serious personal injury in case of an accident or a sudden stop.

SSS0703

The center seat belt buckle and the tongue are identified by the CENTER mark. The center seat belt tongue can be fastened only into the center seat belt buckle.

Stowing rear center seat belt:

When folding down the rear seat, the rear center seat belt can be retracted into a stowed position as follows:

1.Hold the connector tongue *1 so that the seat belt does not retract suddenly when the

tongue is released from the connector buckle. Release the connector tongue *1 by inserting a suitable tool such as key *2 into the connector buckle.

2.Retract the seat belt and secure the seat

belt tongue and connector tongue on the seat belt hook *3 .

WARNING

. Do not unfasten the rear center seat belt connector except when folding down the rear seat.

. When returning the seatback, be sure to attach the rear center seat belt connector.

SSS0965

SSS0966

Attaching rear center seat belt:

Always be sure the rear center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the rear seat.

1-22 Safety — Seats, seat belts and supplemental restraint system

SEAT BELT MAINTENANCE

. To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets. Then wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry.

. If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth.

. Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors, work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced.

CHILD RESTRAINTS

SSS0099

SSS0100

Safety — Seats, seat belts and supplemental restraint system 1-23

1-24 Safety — Seats, seat belts and supplemental restraint system

Vehicle Safety Standard 213.

. Check the child restraint in your vehicle to be sure it is compatible with the vehicle’s seat and seat belt system.

. If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Choose a child restraint that is designed for your child’s height and weight. Always follow all recommended procedures.

All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. Canadian law requires the top tether strap on front-facing child restraints be secured to the designated anchor point on the vehicle.

Lower Anchors and Tethers for CHildren System (LATCH) (except for Cargo Van models)

Your vehicle is equipped with special anchor points that are used with Lower Anchors and Tethers for CHildren System (LATCH) compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint.

SSS0801

LATCH system anchor location

SSS0637

LATCH system lower anchor

LATCH lower anchor point locations

The LATCH anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LATCH anchors.

WARNING

. Attach LATCH system compatible child restraints only at the locations shown in the illustration. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident.

. Do not secure a child restraint in the center rear seating position using the LATCH anchors. The child restraint will not be secured properly.

. Child restraint anchor points are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses.

1-26 Safety — Seats, seat belts and supplemental restraint system

TOP TETHER STRAP CHILD RESTRAINT

If the manufacturer of your child restraint requires the use of a top tether strap, it must be secured to an anchor point.

WARNING

. Child restraint anchor points are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses.

. If the cargo cover contacts the top tether strap when it is attached to the top tether anchor, remove the cargo cover from the vehicle or secure it on the cargo floor below its attachment location. If the cargo cover is not removed, it may damage the top tether strap during a collision. Your child could be seriously injured or killed in a collision if the child restraint top tether strap is damaged.

. Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly

secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or that contacts the top tether strap may damage the top tether strap during a collision. Your child could be seriously injured or killed in a collision if the child restraint top tether strap is damaged.

Top tether anchor point locations

Anchor points are located in the following locations.

. On the seat cushion behind the outboard and center seating positions (except for Cargo Van models)

. On the floor behind the front passenger seat (Cargo Van models)

Safety — Seats, seat belts and supplemental restraint system 1-27

If you have any questions when installing a top tether strap child restraint on the rear seat, consult your NISSAN dealer for details.

SSS1039

Front passenger seat (Cargo Van models):

For the front passenger seat in Cargo Van models, install the top tether strap according to the following procedure.

1. Adjust the head restraint to its highest position.

2. Route the top tether strap between the head restraint and the top of the seatback.

3. Secure the tether strap to the tether anchor point on the floor behind the seat.

4. Tighten the tether strap according to the manufacturer’s instructions to remove any slack.

1-28 Safety — Seats, seat belts and supplemental restraint system

For the best child restraint fit, see the child restraint installation instructions in this section and the child restraint manufacturer’s instructions.

If you have any questions when installing a top tether strap child restraint on the front passenger’s seat, consult your NISSAN dealer for details.

CHILD RESTRAINT INSTALLATION USING LATCH (except for Cargo Van models)

WARNING

. Attach LATCH system compatible child restraints only at the locations shown. For the LATCH lower anchor locations, see “Lower Anchors and Tethers for CHildren System (LATCH) (except for Cargo Van models)” earlier in this section. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident.

. The LATCH anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstance are they to be used for adult seat belts or

harnesses.

. Inspect the lower anchors by inserting your fingers into the lower anchor area and feeling to make sure there are no obstructions over the LATCH anchors, such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the LATCH anchors are obstructed.

Front-facing

Follow these steps to install a front-facing child restraint using LATCH system:

1.Adjust the rear seat to the upright and rearmost position.

2.Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions.

3.Secure the child restraint anchor attachments to the LATCH lower anchors. Check to make sure the LATCH attachment is properly attached to the lower anchors.

4.The back of the child restraint should be secured against the seatback.

If necessary, remove the headrest to obtain the correct child restraint fit. (See “ADJUSTABLE HEADRESTS” earlier in this section.)

If the headrest is removed, store it in a secure place. Be sure to reinstall the headrest when the child restraint is removed. If the seating position does not have a removal headrest and it is interfering with the proper child restraint fit, try another seating position or a different child restraint.

SSS0647

Front-facing — step 5

5. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.

6. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anchor point. (See “TOP TETHER STRAP CHILD RESTRAINT” earlier in this section.)

SSS0638

Front-facing — step 7

7.After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the seat near the LATCH attachment path. The child restraint should not move more than 1 inch (25 mm) from side to side. Try to tug it forward and check to see if the LATCH attachment holds the restraint in place. If the restraint is not secure, tighten the LATCH attachment as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles.

SSS0639

Rear-facing — step 4

4.For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.

SSS0650

Rear-facing — step 5

5.After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the seat near the LATCH attachment path. The child restraint should not move more than 1 inch (25 mm) from side to side. Try to tug it forward and check to see if the LATCH attachment holds the restraint in place. If the restraint is not secure, tighten the LATCH attachment as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles.

SSS0100

CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS

WARNING

. Even with the NISSAN Advanced Air Bag System, never install a rearfacing child restraint in the front passenger seat. Front air bags inflate with great force. A rear-facing child restraint could be struck by the front air bag in a crash and could seriously injure or kill your child.

. NISSAN recommends that child restraints be installed in the rear seat.

1-34 Safety — Seats, seat belts and supplemental restraint system

SSS0360B

Front-facing — step 3

3.Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s instructions for belt routing.