Nikon coolpix a1000 инструкция на русском

1. Manuals
2. Brands
3. Nikon Manuals
4. Digital Camera
5. Coolpix A1000
6. User manual

• Page 1
  DIGITAL CAMERA Reference Manual Read this manual thoroughly before using the camera. To ensure proper use of the camera, be sure to read “For Your Safety” (page vi). After reading this manual, keep it in a readily accessible place for future reference.

• Page 2: Quick Topic Search

  Quick Topic Search You can return to this page by tapping or clicking in the lower right of any page. Main Topics Introduction ……………………..iii Table of Contents ……………………x Parts of the Camera ………………….. 1 Getting Started……………………14 Basic Shooting and Playback Operations …………..22 Shooting Features……………………30 Playback Features…………………….83 Movies ……………………….95…

• Page 3: Introduction

  Introduction Read This First Thank you for purchasing the Nikon COOLPIX A1000 digital camera. Symbols and Conventions Used in This Manual Tap or click in the lower right of each page to display “Quick Topic Search” (Aii). Symbols Symbol Description This icon marks cautions and information that should be read before using the camera.

• Page 4: Information And Precautions

  Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.

• Page 5
  Nikon will not be held liable for any damages resulting from the use of this product. While every effort was made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately).

• Page 6: For Your Safety

  For Your Safety To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product. Keep these safety instructions where all those who use this product will read them. Failure to observe the precautions marked DANGER with this icon carries a high risk of death or…

• Page 7
  Keep this product out of reach of children. Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this product, seek immediate medical attention.
• Page 8
  Do not leave the product where it will be exposed to extremely high temperatures, for an extended period such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could result in fire or product malfunction. Do not transport the camera with a tripod or similar accessory attached.
• Page 9
  If battery liquid comes into contact with a person’s skin or clothing, immediately rinse the affected area with plenty of clean water. Failure to observe this precaution could result in skin irritation. Introduction For Your Safety…

• Page 10: Table Of Contents

  Table of Contents Quick Topic Search ………………….. ii Main Topics…………………………….ii Common Topics …………………………..ii Introduction ……………………… iii Read This First ……………………….iii Symbols and Conventions Used in This Manual ………………iii Information and Precautions ……………………..iv For Your Safety ……………………….vi Parts of the Camera ………………….

• Page 11
  Shooting Features………………….. 30 Selecting a Shooting Mode………………….. 31 A (Auto) Mode ………………………. 32 Scene Mode (Shooting Suited to the Shooting Conditions) ……….33 Tips and Notes About Scene Mode………………….. 34 Shooting with Easy Panorama…………………….. 42 Playback with Easy Panorama ……………………… 44 Shooting with Smart Portrait (Enhancing Human Faces When Shooting)……
• Page 12
  Editing Images (Still Images) ………………….88 Before Editing Images ……………………….88 Quick Retouch: Enhancing Contrast and Saturation …………….89 D-Lighting: Enhancing Brightness and Contrast………………. 89 Red-eye Correction: Correcting Red-eye When Shooting with the Flash ……90 Glamour Retouch: Enhancing Human Faces………………. 90 Filter Effects: Applying Digital Filter Effects………………..
• Page 13
  The Shooting Menu (A, B, C, or D Mode)…………….130 White Balance (Adjusting Hue)……………………130 Metering …………………………….133 Continuous Shooting ……………………….134 ISO Sensitivity …………………………..138 Exposure Bracketing……………………….. 139 AF Area Mode…………………………..140 Autofocus Mode …………………………143 Noise Reduction Filter ……………………….144 M Exposure Preview ………………………..
• Page 14
  Image Comment …………………………176 Copyright Information ……………………….177 Location Data …………………………..178 Toggle Av/Tv Selection ……………………….178 MF Peaking…………………………… 179 Reset All…………………………….179 Touch-screen Controls……………………….179 Conformity Marking………………………… 180 Firmware Version…………………………180 Technical Notes……………………. 181 Notices…………………………182 Notes About Wireless Communication Functions …………..184 Caring for the Product ……………………

• Page 15: Parts Of The Camera

  Parts of the Camera The Camera Body ……………………2 Principle Functions of the Controls …………….. 4 Operating the Touch Panel………………..7 The Monitor/Viewfinder…………………10 Parts of the Camera…

• Page 16: The Camera Body

  The Camera Body 1 2 3 4 5 Flash raised Lens cover closed Eyelet for strap……….15 Flash …………..25, 58 q (snap-back zoom) button….71 Command dial……….53 Shutter-release button…….24, 73 Side zoom control……..70 f : Wide-angle ……..70 Zoom control……….

• Page 17
  3 4 5 12 k (apply selection) button ….120 Eye sensor …………26 13 l (delete) button ……..28 Electronic viewfinder…….. 26 14 d (menu) button……… 120 Diopter adjustment control….26 x (monitor) button ……. 26 15 b (e movie-record) button….. 96 K (flash pop-up) control …

• Page 18: Principle Functions Of The Controls

  Principle Functions of the Controls Control Main Function For shooting Select a shooting mode (A31). Mode dial Move toward g (i) (telephoto) to zoom in closer to the subject, and move toward f For shooting (h) (wide-angle) to zoom out and view a larger area.

• Page 19
  Control Main Function For shooting Start and stop movie recording. For playback Return to shooting mode. b (e movie-record) button While the shooting screen is displayed: Display the following setting screens by pressing: — Up (H): m (flash mode) — Left (J): n (self-timer) — Down (I): p (focus mode) — Right (K): o (exposure compensation/ brightness, vividness, hue, Active D-…
• Page 20
  Control Main Function When the shooting mode is A (A53): Set the flexible program. When the shooting mode is B or D For shooting (A53): Set the shutter speed. When the shooting mode is C (A53): Set the f-number. While the playback screen is displayed: Change the displayed image.

• Page 21: Operating The Touch Panel

  Operating the Touch Panel The monitor of this camera is a touch panel, and can be operated by touching it with your fingers. Tapping Briefly touch the touch panel. Tap to select items in the shooting screen and menus. Tap to select images in thumbnail playback mode. Quickly tap twice in full-frame playback mode to zoom in on images.

• Page 22
  Flicking Sweep your finger up, down, left, or right on the touch panel. Displays the previous or next image during playback (full-frame playback). Scrolls the screen in menus and thumbnail playback. Sliding Touch the touch panel, move your finger up, down, left, or right, and then release.
• Page 23
  Notes About the Touch Panel The touch panel of this camera is a capacitive type. It may not respond when you touch it with your fingernails or with gloves on. Do not press the touch panel with sharp-pointed, hard objects. Do not press or rub the touch panel with excessive force.

• Page 24: The Monitor/Viewfinder

  The Monitor/Viewfinder The information that is displayed on the shooting or playback screen changes depending on the camera’s settings and state of use. By default, information is displayed when the camera is turned on and when you operate the camera, and turns off after a few seconds (when Photo info is set to Auto info in Monitor settings (A163)).

• Page 25
  8 4 0 m m 8 4 0 m m x 2 . 0 x 2 . 0 1 0 1 0 0 . 0 0 . 0 2 9 m 0 s 2 9 m 0 s 2 9 m 0 s 2 9 m 0 s 1 0 0 1 0 0…
• Page 26
  ± 0 . 3 ± 0 . 3 ± 0 . 7 ± 0 . 7 ± 1 . 0 ± 1 . 0 1 2 0 1 2 0 8 4 0 m m 8 4 0 m m x 2 .

• Page 27: For Playback

  For Playback 1 2 2 3 4 5 6 7 8 9 9 9 / 9 9 9 9 9 9 / 9 9 9 9 9 9 / 9 9 9 9 9 9 / 9 9 9 9 9 9 9 / 9 9 9 9 9 9 9 9 / 9 9 9 9 2 9 m 0 0 s 2 9 m 0 0 s…

• Page 28: Getting Started

  Getting Started How to Attach the Strap ………………..15 Inserting the Battery and Memory Card……………16 Charging the Battery………………….17 Changing the Angle of the Monitor …………….19 Camera Setup ……………………..20 Getting Started…

• Page 29: How To Attach The Strap

  How to Attach the Strap The strap can be attached to the eyelet on either side (left and right) of the camera body. Getting Started How to Attach the Strap…

• Page 30: Inserting The Battery And Memory Card

  Inserting the Battery and Memory Card Battery latch Memory card slot With the battery’s positive and negative terminals oriented correctly, move the orange battery latch (3), and fully insert the battery (4). Slide the memory card in until it clicks into place (5). Be careful not to insert the battery or memory card upside-down or backward, as this could cause a malfunction.

• Page 31: Charging The Battery

  Charging the Battery Charging AC Adapter* Electrical outlet USB cable (included) Power-on lamp (charge lamp) * A plug adapter is attached depending on the country or region of purchase. The shape of the plug adapter varies with the country or region of purchase. Charging starts when the camera is connected to an electrical outlet while the battery is inserted, as shown in the illustration.

• Page 32
  Notes About Charging the Battery The camera can be operated while the battery is charging, but the charging time increases. The power-on lamp (charge lamp) turns off while the camera is being operated. — Movies cannot be recorded while the battery is charging. Do not, under any circumstances, use another make or model of AC adapter other than the EH-73P/EH-73PCH Charging AC Adapter, and do not use a commercially available USB-AC adapter or a battery charger for a mobile phone.

• Page 33: Changing The Angle Of The Monitor

  Changing the Angle of the Monitor You can adjust the direction and angle of the monitor. For normal shooting When shooting in a low position When shooting in a high position When taking self-portraits Notes About the Monitor When moving the monitor, do not apply excessive force and move slowly within the monitor’s adjustable range so that the connection will not be damaged.

• Page 34: Camera Setup

  Camera Setup When the camera is turned on for the first time, screens to set the display language and camera clock are displayed. Turn on the camera. Use the multi selector to select and adjust settings. Multi selector Power Left Right switch k button…

• Page 35
  Highlight your home time zone and Home time zone press the k button. Press H to set daylight saving time. When it is on, the time is one hour earlier and W is displayed. When you press I to turn it off, the London, Casablanca time goes back one hour.

• Page 36: Basic Shooting And Playback Operations

  Basic Shooting and Playback Operations Shooting Images……………………23 Playing Back Images………………….27 Deleting Images……………………28 Basic Shooting and Playback Operations…

• Page 37: Shooting Images

  Shooting Images A (auto) mode is used here as an example. A (auto) mode enables you to perform general shooting in a variety of shooting conditions. Rotate the mode dial to A. Number of exposures Battery level indicator b: The battery level is high. remaining B: The battery level is low.

• Page 38
  Frame the picture. Move the zoom control or the side zoom control to change the zoom lens position. If you lose sight of the subject while shooting with the lens in telephoto position, press the q (snap-back zoom) button to temporarily widen the visible area so that you can frame the subject more easily.

• Page 39: Using The Flash

  Notes About Saving Images or Movies The indicator showing the number of exposures remaining or the indicator showing the remaining recording time flashes while images or movies are being saved. Do not open the battery-chamber/memory card slot cover or remove the battery or memory card while an indicator is flashing.

• Page 40: Touch Shooting

  Touch Shooting You can switch the touch shooting feature by tapping the touch shooting icon on the shooting screen. At the default setting A Touch shutter, the shutter is released when you simply tap the subject on the screen without using the shutter- 0 .

• Page 41: Playing Back Images

  Playing Back Images Press the c (playback) button to enter playback mode. If you press and hold down the c button while the camera is turned off, the camera turns on in playback mode. Use the multi selector to select an Display the previous image image to display.

• Page 42: Deleting Images

  Deleting Images In playback mode, press the l (delete) button to delete the image currently displayed on the screen. Use the multi selector HI to select the desired deletion method and Delete press the k button. Current image To exit without deleting, press the d button. Erase selected images All images Select Yes and press the k button.

• Page 43: The Image Selection Screen For Deletion

  The Image Selection Screen for Deletion Use the multi selector JK or rotate Erase selected images it to select the image that you want to delete. Move the zoom control (A2) toward g (i) to switch to full-frame playback, or f (h) to switch to thumbnail playback.

• Page 44: Shooting Features

  Shooting Features Selecting a Shooting Mode ………………..31 A (Auto) Mode……………………32 Scene Mode (Shooting Suited to the Shooting Conditions) ……..33 Creative Mode (Applying Effects When Shooting) ……….51 A, B, C, and D Modes (Setting the Exposure for Shooting)…….53 Setting Shooting Functions with the Multi Selector (m/n/p/o) ….57 Flash Mode……………………..58 Self-timer ……………………..61 Focus Mode ……………………..63…

• Page 45: Selecting A Shooting Mode

  Selecting a Shooting Mode You can rotate the mode dial to align the desired shooting mode with the indicator mark on the camera body. A (Auto) mode Select this mode to perform general shooting in a variety of shooting conditions. o (Creative) mode Apply effects to images during shooting.

• Page 46: A (Auto) Mode

  A (Auto) Mode Select this mode to perform general shooting in a variety of shooting conditions. When the camera detects a human face, it focuses on that face (A75). Functions Available in A (Auto) Mode Flash mode (A58) Self-timer (A61) Focus mode (A63) Exposure compensation (A68) Shooting menu (common across shooting modes) (A127)

• Page 47: Scene Mode (Shooting Suited To The Shooting Conditions)

  Scene Mode (Shooting Suited to the Shooting Conditions) Select any one of scene modes based on the shooting conditions, and you can take pictures with the appropriate settings for those conditions. Scene menu Scene auto selector Portrait Portrait Landscape Landscape Time-lapse movie Time-lapse movie Sports…

• Page 48: Tips And Notes About Scene Mode

  Tips and Notes About Scene Mode y M o Scene auto selector The camera recognizes the shooting conditions when you frame a picture, and you can take pictures in accordance with the conditions. Portrait (for taking close-up portraits of one or two people) Portrait (for taking portraits of large numbers of people, or images in which the background takes up a large portion of the frame) Landscape…

• Page 49
  y M e Night portrait Raise the flash before shooting. On the screen displayed when e Night portrait is selected, select u Hand-held or w Tripod. u Hand-held: — While the e icon on the shooting screen is displayed in green, press the shutter- release button all the way to capture a series of images which are combined into a single image and saved.
• Page 50
  y M j Night landscape On the screen displayed when j Night landscape is selected, select u Hand-held or w Tripod. u Hand-held: — While the j icon on the shooting screen is displayed in green, press the shutter- release button all the way to capture a series of images which are combined into a single image and saved.
• Page 51
  y M m Fireworks show You can press the k button when the shooting screen is displayed to focus using manual focus. See step 2 in “Using Manual Focus” (A64) for more information. The shutter speed is fixed at 4 seconds. Exposure compensation cannot be used (A68).
• Page 52
  y M O Pet portrait When you point the camera at a dog or cat, the camera detects the face of a dog or cat and focuses on it. By default, the shutter is automatically released when the face of a dog or cat is detected (pet portrait auto release).
• Page 53
  y M O Soft Applies a slight soft-focus effect over the entire frame for a softer image. Certain Movie options (A145) are not available. y M I Selective color Keeps only a selected color and makes other colors black-and-white. Rotate the command dial to select the desired color.
• Page 54
  y M U Multiple exp. Lighten The camera automatically captures moving subjects at regular intervals, compares each image and composites only their bright areas, and then saves them as one image. Light trails such as the flow of car lights or motion of stars are captured. On the screen displayed when U Multiple exp.
• Page 55
  Notes About Multiple Exp. Lighten The camera cannot capture images if a memory card is not inserted. Do not rotate the mode dial or remove the memory card until shooting ends. Use a sufficiently charged battery to prevent the camera from turning off unexpectedly. Exposure compensation cannot be used (A68).

• Page 56: Shooting With Easy Panorama

  Shooting with Easy Panorama Rotate the mode dial to y M d button M Easy panorama M k button Select Normal or Wide as Easy panorama the shooting range and press the k button. Normal Wide Frame the first edge of the panorama scene, and then press the shutter- release button halfway to focus.

• Page 57
  Example of Camera Movement Using your body as the axis of rotation, move the camera slowly in an arc, in the direction of the marking (KLJI). Shooting stops if the guide does not reach the edge within about 15 seconds (when Normal is selected) or within about 30 seconds (when Wide is selected) after shooting…

• Page 58: Playback With Easy Panorama

  Playback with Easy Panorama Switch to playback mode (A27), display an image 4 / 4 4 / 4 captured using easy panorama in full-frame playback mode, and then press the k button to scroll the image in the direction that was used when shooting.

• Page 59: Shooting With Smart Portrait (Enhancing Human Faces When Shooting)

  Shooting with Smart Portrait (Enhancing Human Faces When Shooting) You can take a picture with the glamour retouch function to enhance human faces. Rotate the mode dial to y M d button M Smart portrait M k button M d button Press the multi selector K to apply an effect.

• Page 60
  Functions Available in Smart Portrait Glamour retouch (A45) Self-Collage (A47) Blink proof (A49) Smile timer (A50) Flash mode (A58) Self-timer (A61) Shooting menu (common across shooting modes) (A127) Using Skin Softening and Foundation Makeup When Smart portrait scene mode is set to Skin softening or Foundation makeup and the camera detects a human face, it processes the image to soften facial skin tones or adjust facial colors before saving the image (up to three faces).
• Page 61
  Using Self-Collage The camera can capture a series of four or nine images at intervals and save them as a one-frame image (a collage image). Rotate the mode dial to y M d button M Smart portrait M k button M Self-Collage M k button Set self-collage.
• Page 62
  Take a picture. When you press the shutter-release button, a countdown starts (about five seconds) and the shutter is automatically released. The camera automatically releases the shutter for the remaining pictures. A countdown starts about three seconds before shooting. The number of shots is indicated by U on the screen.
• Page 63
  Using Blink Proof The camera automatically releases the shutter twice with every shot and saves one image in which the subject’s eyes are open. If the camera saved an image in which the A blink was detected in the picture just taken. subject’s eyes may have been closed, the dialog shown on the right is displayed for a few seconds.
• Page 64
  Using Smile Timer The camera automatically releases the shutter whenever a smiling face is detected. Rotate the mode dial to y M d button M Smart portrait M k button M d button Press the multi selector J to select a Smile timer and press the k button.

• Page 65: Creative Mode (Applying Effects When Shooting)

  Creative Mode (Applying Effects When Shooting) Apply effects to images during shooting. Five effect groups are available: Light (default setting), Depth, Memory, Classic, and Noir. Press the k button. The effect selection screen is displayed. Use the multi selector J K to select Effect group an effect.

• Page 66
  Use J K to adjust the effect level and press the k button. Contrast Back Confirm Slider Press the shutter-release button or the b (e movie-record) button to shoot. The camera detects the main subject and focuses on it (target finding AF) (A74). If a human face is detected, the camera automatically sets focus priority on it.

• Page 67: A, B, C, And D Modes (Setting The Exposure For Shooting)

  A, B, C, and D Modes (Setting the Exposure for Shooting) In A, B, C, and D modes, you can set exposure (combination of shutter speed and f-number) according to the shooting conditions. Also, you can achieve greater control when shooting images by setting the shooting menu options (A120).

• Page 68: Tips For Setting Exposure

  Tips for Setting Exposure The sense of dynamism and amount of background defocus in subjects vary by changing the combinations of shutter speed and f-number even if the exposure is the same. Effect of the Shutter Speed The camera can make a fast-moving subject appear static at a fast shutter speed, or highlight the motion of a moving subject at a slow shutter speed.

• Page 69
  Notes About Setting Exposure When the subject is too dark or too bright, it may not be possible to obtain the appropriate exposure. In such cases, the shutter speed indicator or f-number indicator flashes (in A, B, and C modes), or the exposure indicator is displayed in red (in D mode) when the shutter- release button is pressed halfway.

• Page 70: The Control Range Of The Shutter Speed (A, B, C, And D Modes)

  The Control Range of the Shutter Speed (A, B, C, and D Modes) The control range of the shutter speed differs depending on the zoom position, f-number, or ISO sensitivity setting. Additionally, the control range changes in the following continuous shooting settings. Control range (second) Setting A mode…

• Page 71: Setting Shooting Functions With The Multi Selector (M/N/P/O)

  Setting Shooting Functions with the Multi Selector (m/n/p/o) When the shooting screen is displayed, you can press the multi selector H (m) J (n) I (p) K (o) to set the functions described below. m Flash mode When the flash is raised, the flash mode can be set according to shooting conditions.

• Page 72: Flash Mode

  Flash Mode When the flash is raised, the flash mode can be set according to shooting conditions. Move the K (flash pop-up) control to raise the flash. When the flash is lowered, flash operation is disabled and S is displayed. Press the multi selector H (m).

• Page 73
  Available Flash Modes Auto The flash fires when necessary, such as in dim lighting. The flash mode indicator is only displayed immediately after setting on the shooting screen. Auto+red-eye reduction/Red-eye reduction Reduce red-eye in portraits caused by the flash (A60). When Red-eye reduction is selected, the flash fires whenever a picture is taken.
• Page 74
  Auto+Red-eye Reduction/Red-eye Reduction If the camera detects red-eye while saving an image, the affected area is processed to reduce red-eye before the image is saved. Note the following when shooting: More time than usual is required to save images. Red-eye reduction may not produce the desired results in some situations. In rare cases, red-eye reduction may be applied to areas of an image unnecessarily.

• Page 75: Self-Timer

  Self-timer The camera releases the shutter when the set number of seconds elapses after you press the shutter-release button. Set Photo VR (A168) to Off in the setup menu when using a tripod to stabilize the camera during shooting. Press the multi selector Select the number of seconds until Self-timer the shutter is released, and press the…

• Page 76
  Focus and Exposure When Shooting with the Self-timer n10s/n3s: The focus and exposure are locked when you press the shutter-release button all the way down. r5s: The focus and exposure are set right before the shutter is released. The Self-timer Setting The setting may not be available with some shooting modes (A78).

• Page 77: Focus Mode

  Focus Mode You can select the focus mode that is appropriate for the shooting distance. Press the multi selector I (p). Select the desired focus mode Autofocus (A63) and press the k button. If the setting is not applied by pressing the k button, the selection will be canceled.

• Page 78: Using Manual Focus

  Using Manual Focus Available in the following shooting modes. A, B, C, and D modes Sports or Fireworks show scene mode Press the multi selector I Manual focus (p), select E (manual focus), and then press the k button. Use the multi selector to adjust the focus while checking the enlarged view.

• Page 79
  E (Manual Focus) The digits displayed for the gauge on the right of the screen in step 2 serve as a guideline for the distance to a subject that is in focus when the gauge is near the center. The closest distance at which the camera can focus varies depending on the zoom position.

• Page 80: Using The Creative Slider

  Using the Creative Slider When the shooting mode is set to A, B, C, or D mode, you can adjust the brightness (exposure compensation), vividness, hue, and Active D-Lighting when shooting. Press the multi selector K (o). Use JK to select an item. Brightness (Exp.

• Page 81
  Creative Slider Settings When the shooting mode is set to D mode, Brightness (Exp. +/-) cannot be used. Active D-Lighting is not applied to movies recorded with Movie options set to h HS 720/4×. When using Active D-Lighting, noise (randomly-spaced bright pixels, fog, lines) may be emphasized, dark shadows may appear around bright subjects, or bright areas may appear around dark subjects under some shooting conditions.

• Page 82: Exposure Compensation (Adjusting Brightness)

  Exposure Compensation (Adjusting Brightness) When the shooting mode is set to A (auto) mode, scene mode, creative mode, or short movie show mode, you can adjust the brightness (exposure compensation). Press the multi selector K (o). Select a compensation value and Slider press the k button.

• Page 83: Using The W (Function) Button

  Using the w (Function) Button If you press the w button in A, B, C, or D mode, you can quickly configure the pre- saved menu options. The menu options listed below can be saved. Image quality (A127) Continuous (A134) Image size (A129) ISO sensitivity (A138) White balance (A130)

• Page 84: Using The Zoom

  Using the Zoom When you move the zoom control or side zoom control, the zoom lens position changes. To zoom in: Move toward g To zoom out: Move toward f When you turn the camera on, the zoom moves to the maximum wide-angle position. Zoom out Zoom in Zoom in…

• Page 85
  Using the Snap-back Zoom If you lose sight of the subject while shooting with the lens in telephoto position, press the q (snap- back zoom) button to temporarily widen the visible area (angle of view) so that you can frame the subject more easily.

• Page 86: Using Touch Shooting

  Using Touch Shooting You can switch the touch shooting feature by tapping the touch shooting icon on the shooting screen. 0 . 0 0 . 0 2 5 m 0 s 2 5 m 0 s 1 0 0 1 0 0 1 / 2 5 0 1 / 2 5 0 F 3 .

• Page 87: Focusing

  Focusing The Shutter-release Button To press the shutter-release button “halfway” means to press and hold the button at the point where you feel a slight resistance. Focus and exposure (shutter speed and f-number) are set Press halfway when you press the shutter-release button halfway. Focus and exposure remain locked while the button is pressed halfway.

• Page 88: Using Target Finding Af

  Using Target Finding AF When AF area mode (A140) is set to Target finding AF in A, B, C, or D mode, or when in creative mode, the camera focuses in the manner described below when you press the shutter-release button halfway. The camera detects the main subject and focuses on it.

• Page 89: Using Face Detection

  Using Face Detection In the following settings, the camera uses face detection to automatically focus on human faces. A (auto) mode (A31) Scene auto selector, Portrait, Night portrait, or Smart portrait scene mode (A33) Short movie show mode (A103) 0 . 0 0 .

• Page 90: Subjects Not Suitable For Autofocus

  Subjects Not Suitable for Autofocus The camera may not focus as expected in the following situations. In rare cases, the subject may not be in focus despite the fact that the focus area or the focus indicator is displayed in green: Subject is very dark Objects of sharply differing brightness are included in the shooting conditions (e.g.

• Page 91: Focus Lock

  Focus Lock Use focus lock to capture creative compositions even when the focus area is set to the center of the frame. Position the subject in the center of the frame and press the shutter-release button halfway. The camera focuses on the subject and the focus area is displayed in 1 / 2 5 0 1 / 2 5 0…

• Page 92: Default Settings (Flash Mode, Self-Timer, And Focus Mode)

  Default Settings (Flash Mode, Self-timer, and Focus Mode) The default settings for each shooting mode are listed below. Flash mode Self-timer Focus mode (A57) (A57) (A57) A (auto) o (creative mode) y (scene mode) o (scene auto selector) b (portrait) c (landscape) N (time-lapse movie) d (sports)

• Page 93
  E (manual focus) cannot be selected. The camera automatically selects the flash mode appropriate for the shooting conditions it has selected. W (off) can be selected manually. Cannot be changed. r5s Self-portrait timer cannot be used. A (autofocus) or E (manual focus) can be selected. May switch to slow sync with red-eye reduction flash mode.

• Page 94: Functions That Cannot Be Used Simultaneously When Shooting

  Functions That Cannot Be Used Simultaneously When Shooting Some functions cannot be used with other menu settings. Restricted Option Description function When saving RAW images, red-eye is not reduced even when V (auto+red-eye reduction/red-eye Image quality (A127) reduction) is set (including simultaneously saved JPEG images).

• Page 95
  Restricted Option Description function When hue is adjusted using the creative slider, Hue (using the White balance in the shooting menu cannot be set. To set White balance, select g in the creative White balance creative slider) (A66) slider setting screen to reset the brightness, vividness, hue, and Active D-Lighting.
• Page 96
  Restricted Option Description function Self-Collage When Self-Collage is set, Blink proof cannot be (A47) used. Blink proof Smile timer When Smile timer is set, Blink proof cannot be (A50) used. When RAW, RAW + Fine, or RAW + Normal is Image quality selected, date and time cannot be stamped on (A127)

• Page 97: Playback Features

  Playback Features Playback Zoom……………………84 Thumbnail Playback/Calendar Display……………..85 Viewing and Deleting Images in a Sequence………….86 Editing Images (Still Images) ………………..88 Playback Features…

• Page 98: Playback Zoom

  Playback Zoom Moving the zoom control toward g (i playback zoom) g (i) in full-frame playback mode (A27) zooms in on the image. 4 / 4 4 / 4 g (i) f (h) Displayed 1 0 0 — 0 0 0 4 . J P G 1 0 0 — 0 0 0 4 .

• Page 99: Thumbnail Playback/Calendar Display

  Thumbnail Playback/Calendar Display Moving the zoom control toward f (h thumbnail f (h) playback) in full-frame playback mode (A27) displays images as thumbnails. 4 / 4 4 / 4 1 / 2 0 f (h) f (h) 2 0 1 9 4 4 4 5 5 5 6 6 6…

• Page 100: Viewing And Deleting Images In A Sequence

  Viewing and Deleting Images in a Sequence Viewing Images in a Sequence Images captured continuously or with the self-collage function are saved as a sequence. One image in a sequence is used as the key picture 1 / 5 1 / 5 to represent the sequence when displayed in full- frame playback mode or thumbnail playback mode.

• Page 101: Deleting Images In A Sequence

  Deleting Images in a Sequence When the l (delete) button is pressed for images in a sequence, the images that are deleted vary depending on how the sequences are displayed. When the key picture is displayed: — Current image: All images in the displayed sequence are deleted. — Erase selected images: When a key picture is selected on the erase selected images screen (A29), all images in that sequence are deleted.

• Page 102: Editing Images (Still Images)

  Editing Images (Still Images) Before Editing Images You can easily edit images on this camera. Edited copies are saved as separate files. Edited copies are saved with the same shooting date and time as the original. Restrictions on Image Editing RAW images cannot be edited.

• Page 103: Quick Retouch: Enhancing Contrast And Saturation

  Quick Retouch: Enhancing Contrast and Saturation Press the c button (playback mode) M Select an image M d button M Quick retouch M k button Use the multi selector HI to select the Quick retouch desired effect level and press the k button.

• Page 104: Red-Eye Correction: Correcting Red-Eye When Shooting With The Flash

  Red-eye Correction: Correcting Red-eye When Shooting with the Flash Press the c button (playback mode) M Select an image M d button M Red-eye correction M k button Preview the result and press the Red-eye correction k button. To exit without saving the copy, press the multi selector J.

• Page 105
  Use JK to select the effect, use HI Small face to select the effect level, and press the k button. You can simultaneously apply multiple effects. Adjust or check the settings for all effects before pressing the k button. F Small face, B Skin softening, Back Preview l Foundation makeup, m Glare…

• Page 106: Filter Effects: Applying Digital Filter Effects

  Filter Effects: Applying Digital Filter Effects Press the c button (playback mode) M Select an image M d button M Filter effects M k button Option Description Blurs the background of human subjects. When no human subjects Soft portrait are detected, keeps the area in the center of the frame in focus and blurs the surrounding area.

• Page 107
  Use HI to select the color to keep Selective color and press the k button. Preview the result and press the Preview k button. An edited copy is created. To exit without saving the copy, press J. Back Save Playback Features Editing Images (Still Images)

• Page 108: Crop: Creating A Cropped Copy

  Crop: Creating a Cropped Copy Move the zoom control to enlarge the image (A84). Adjust the image so that only the portion that you want to keep is displayed, and then press the d (menu) button. Move the zoom control toward g (i) or f (h) to adjust the magnification rate.

• Page 109: Movies

  Movies Basic Operations of Movie Recording and Movie Playback……..96 Capturing Still Images While Recording Movies………… 100 Shooting Time-lapse Movies………………101 Short Movie Show Mode (Combining Movie Clips to Create Short Movies)… 103 Operations During Movie Playback …………….106 Editing Movies ……………………107 Movies…

• Page 110: Basic Operations Of Movie Recording And Movie Playback

  Basic Operations of Movie Recording and Movie Playback Display the shooting screen. Remaining movie recording time Check the remaining amount of movie recording time. It is recommended that you display the movie frame that indicates the area that will be recorded in a movie (A97).

• Page 111
  Movie Frame Set Photo info in Monitor settings (A163) in the setup menu to Movie frame+auto info to display the movie frame. Check the range of a movie in a frame before movie recording. The area that is recorded in a movie varies depending on the Movie options or Movie VR settings in the movie menu.
• Page 112
  Maximum Movie Recording Time Individual movie files cannot exceed 29 minutes in length, even when there is sufficient free space on the memory card for longer recording. The maximum size of a single movie file is 4 GB. If a file exceeds 4 GB even when you record for less than 29 minutes, it is split into multiple files and cannot be played back continuously (A145).
• Page 113
  Notes About Recorded Movies There may be some degradation in image quality when digital zoom is used. The sounds of zoom control operation, zoom, autofocus lens drive movement, movie vibration reduction, and aperture operation when brightness changes may be recorded. The following phenomena may be seen on the screen while recording movies.

• Page 114: Capturing Still Images While Recording Movies

  Capturing Still Images While Recording Movies If the shutter-release button is pressed all the way while recording a movie, one frame is saved as a still image (JPEG image). Movie recording continues while the still image is being saved. A still image can be captured when Q is displayed on the screen.

• Page 115: Shooting Time-Lapse Movies

  Shooting Time-lapse Movies The camera can automatically capture still images at a specified interval to create time-lapse movies that are approximately 10 seconds long. When the Frame rate setting of the movie menu is set to 30 fps (30p/60p), 300 images are captured and saved with e 1080/30p.

• Page 116
  Select whether or not to fix exposure Landscape (25 minutes) (brightness), and press the k button (except Star trails (150 minutes) AE-L on and Night sky (150 minutes)). AE-L off When AE-L on is selected, the exposure used for the first image is used for all images. When the brightness changes drastically like at dusk, AE-L off is recommended.

• Page 117: Short Movie Show Mode (Combining Movie Clips To Create Short Movies)

  Short Movie Show Mode (Combining Movie Clips to Create Short Movies) The camera creates a short movie that is up to 30 seconds long (e1080/30p or S1080/25p) by recording and automatically combining multiple movie clips that are several seconds long. Press the d (menu) button and Short movie show configure the settings for recording…

• Page 118
  Save the short movie show. The short movie show is saved when the camera finishes recording the specified number of movie clips. To save a short movie show before the camera finishes recording the specified number of movie clips, press the d button when the shooting standby screen is displayed, and then select End recording.
• Page 119
  Operations During Movie Clip Playback To adjust the volume, move the zoom control while a movie clip is playing (A2). Playback controls are displayed on the screen. Playback controls The operations described below can be performed by using the multi selector JK to select a control and then pressing the k button.

• Page 120: Operations During Movie Playback

  Operations During Movie Playback To adjust the volume, move the zoom control while a movie is playing ( Rotate the multi selector or the command dial to fast-forward or rewind. Volume indicator Playback controls are displayed on the screen. The operations described below can be performed by using the multi selector JK to select a control and then pressing the k button.

• Page 121: Editing Movies

  Editing Movies When editing movies, use a sufficiently charged battery to prevent the camera from turning off during editing. When the battery level indicator is B, movie editing is not possible. Extracting Only the Desired Portion of a Movie The desired portion of a recorded movie can be saved as a separate file. Play back a desired movie and pause at the start point of the portion that you want to extract (A106).

• Page 122: Saving A Frame From A Movie As A Still Image

  Use HI to select m (save) and press Save the k button. Follow the instructions on the screen to save the movie. 3 0 s 3 0 s Notes About Movie Extracting A movie that was created by editing cannot be edited again. The actual trimmed portion of a movie may differ slightly from the portion selected using the start and end points.

• Page 123: Connecting The Camera To A Tv, Printer, Or Computer

  Connecting the Camera to a TV, Printer, or Computer Utilizing Images ……………………. 110 Viewing Images on a TV………………..111 Printing Images Without a Computer……………. 112 Transferring Images to a Computer (ViewNX-i) …………. 116 Connecting the Camera to a TV, Printer, or Computer…

• Page 124: Utilizing Images

  Utilizing Images In addition to using the SnapBridge app to enjoy the captured images, you can also utilize the images in various ways by connecting the camera to the devices described below. Viewing Images on a TV Images and movies captured with the camera can be viewed on a TV. Connection method: Connect a commercially available HDMI cable to the TV’s HDMI input jack.

• Page 125: Viewing Images On A Tv

  Viewing Images on a TV Turn off the camera and connect it to the TV. Check the shape and direction of the plugs and do not insert or remove the plugs at an angle. HDMI micro connector To HDMI jack (Type D) Set the TV’s input to external input.

• Page 126: Printing Images Without A Computer

  Printing Images Without a Computer Users of PictBridge-compatible printers can connect the camera directly to the printer and print images without using a computer. Connecting the Camera to a Printer Turn on the printer. Turn off the camera and connect it to the printer using the USB cable.

• Page 127: Printing Images One At A Time

  Printing Images One at a Time Use the multi selector JK to select Print selection the desired image and press the k 15/11/2019 No. 32 button. Move the zoom control toward f (h) to switch to thumbnail playback or g (i) to switch to full-frame playback.

• Page 128: Printing Multiple Images

  Printing Multiple Images When the Print selection screen is Print selection displayed, press the d (menu) 15/11/2019 No. 32 button. Confirm Use the multi selector HI to select Print menu Paper size and press the k button. Print selection Print all images Select the desired paper size and press the k Paper size button.

• Page 129
  Print selection Select images (up to 99) and the number Print selection of copies (up to 9) of each. Use the multi selector JK to select images, and use HI to specify the number of copies to be printed. Images selected for printing are indicated by a and the number of copies to be printed.

• Page 130: Transferring Images To A Computer (Viewnx-I)

  Transferring Images to a Computer (ViewNX-i) Installing ViewNX-i ViewNX-i is Nikon software that enables you to transfer images and movies to your computer for viewing and editing. To install ViewNX-i, download the latest version of the ViewNX-i installer from the following website and follow the on-screen instructions to complete installation.

• Page 131
  Nikon Transfer 2 as the default application to open when the camera is connected to your computer. If the memory card contains a large number of images, it may take a while for Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.
• Page 132
  If the camera is connected to the computer, turn the camera off and disconnect the USB cable. Capture NX-D Use Nikon’s Capture NX-D software to fine-tune photos or to change settings for RAW pictures and save them in other formats. It is available for download from the following website: https://downloadcenter.nikonimglib.com…

• Page 133: Using The Menu

  Using the Menu Menu Operations………………….. 120 Menu Lists ……………………..123 The Shooting Menu (Common Across Shooting Modes) ……..127 The Shooting Menu (A, B, C, or D Mode)………….. 130 The Movie Menu …………………… 145 The Playback Menu………………….153 The Network Menu ………………….158 The Setup Menu…………………….161 Using the Menu…

• Page 134: Menu Operations

  Menu Operations You can set the menus listed below by pressing the d (menu) button. 1, 2 A Shooting menu e Movie menu c Playback menu J Network menu z Setup menu Press the d button when the shooting screen is displayed. Menu icons and available setting options vary depending on the shooting mode.

• Page 135
  Select a menu option and Set up press the k button. Time zone and date Monitor settings Certain menu options cannot EVF auto toggle Date stamp be set depending on the Self-timer: after release current shooting mode or the Photo VR state of the camera.

• Page 136: The Image Selection Screen

  The Image Selection Screen When an image selection screen such as the one Erase selected images shown on the right is displayed while operating the camera menu, follow the procedures described below to select the images. ON/OFF Confirm Back Use the multi selector JK or rotate Erase selected images it to select the desired image.

• Page 137: Menu Lists

  Menu Lists The Shooting Menu Enter shooting mode M d button Common Options Option Default setting Image quality* Normal i 4608×3456 Image size* * Also can be set by pressing the w (function) button (A121). For A, B, C, and D Modes Option Default setting Auto (normal)

• Page 138: The Movie Menu

  The Movie Menu Enter shooting mode M d button M e menu icon M k button Option Default setting e 1080/30p or S 1080/25p Movie options Autofocus mode Single AF Movie VR On (hybrid) Wind noise reduction Frame rate – The Playback Menu Press the c button (playback mode) M d button Option…

• Page 139: The Network Menu

  The Network Menu Press the d button M J menu icon M k button Option Airplane mode Choose connection Connect to smart device Connection to remote Send while shooting Wi-Fi Bluetooth Restore default settings Using the Menu Menu Lists…

• Page 140: The Setup Menu

  The Setup Menu Press the d button M z menu icon M k button Option Time zone and date Monitor settings EVF auto toggle Date stamp Self-timer: after release Photo VR* AF assist Digital zoom Assign side zoom control AE/AF lock button Sound settings Auto off Format card/Format memory…

• Page 141: The Shooting Menu (Common Across Shooting Modes)

  F RAW set during shooting such as white balance and contrast. Image size is fixed at i 4608×3456 File format: RAW (NRW), Nikon’s own format Two images are recorded at the same time, one RAW image and G RAW + Fine one fine-quality JPEG image.

• Page 142
  RAW Images of This Camera RAW images cannot be processed on this camera. ViewNX-i (A116) needs to be installed on the computer to be able to view RAW images on the computer. RAW images cannot be edited or printed directly. You can adjust images or process RAW images if you transfer RAW images to a computer, and then use software such as Capture NX-D (A118).

• Page 143: Image Size

  Image Size Enter shooting mode M d button M Image size M k button Set the image size (number of pixels) used when saving JPEG images. The larger the image size, the larger the size at which it can be printed, but the number of images that can be saved is reduced.

• Page 144: The Shooting Menu (A, B, C, Or D Mode)

  The Shooting Menu (A, B, C, or D Mode) See “Image Quality” (A127) and “Image Size” (A129) for information about Image quality and Image size. White Balance (Adjusting Hue) Rotate the mode dial to A, B, C, or D M d button M A, B, C, or D menu icon M White balance M k button Adjust white balance to suit the light source or weather conditions in order to make the colors in images match what you see with your eyes.

• Page 145
  Color Temperature Color temperature is an objective measure of colors of light sources which are expressed in the unit of absolute temperature (K: Kelvin). Light sources with lower color temperatures appear more reddish, while light sources with higher color temperatures appear more bluish.
• Page 146
  Using Preset Manual Follow the procedures described below to measure the white balance value under the lighting used during shooting. Place a white or gray reference object under the lighting that will be used during shooting. Use the multi selector HI to select White balance Preset manual, and press the k Auto (normal)

• Page 147: Metering

  Metering Rotate the mode dial to A, B, C, or D M d button M A, B, C, or D menu icon M Metering M k button The process of measuring the brightness of the subject to determine the exposure is known as “metering.”…

• Page 148: Continuous Shooting

  Continuous Shooting Rotate the mode dial to A, B, C, or D M d button M A, B, C, or D menu icon M Continuous M k button Option Description U Single One image is captured each time the shutter-release button is pressed.

• Page 149
  Notes About Continuous Shooting Focus, exposure and white balance are fixed at the values determined with the first shot in each series (except Intvl timer shooting). It may take some time to save the images after shooting. When ISO sensitivity increases, noise may appear in captured images. The frame rate may become slower depending on the image quality, image size, memory card type or shooting conditions (such as when saving RAW images).
• Page 150
  Interval Timer Shooting Rotate the mode dial to A, B, C, or D M d button M A, B, C, or D menu icon M Continuous M k button M Intvl timer shooting M k button Set the desired interval between Intvl timer shooting each shot.
• Page 151
  Notes About Interval Timer Shooting To prevent the camera from turning off unexpectedly during shooting, use a sufficiently charged battery. If the EH-62F AC Adapter (available separately; A207) is used, this camera can be powered from an electrical outlet. Do not, under any circumstances, use an AC adapter other than the EH-62F.

• Page 152: Iso Sensitivity

  ISO Sensitivity Rotate the mode dial to A, B, C, or D M d button M A, B, C, or D menu icon M ISO sensitivity M k button A higher ISO sensitivity allows darker subjects to be captured. Additionally, even with subjects of similar brightness, pictures can be taken at faster shutter speeds, and blurring caused by camera shake and subject movement can be reduced.

• Page 153: Exposure Bracketing

  Exposure Bracketing Rotate the mode dial to A, B, or C M d button M A, B, or C menu icon M Exposure bracketing M k button The exposure (brightness) can be changed automatically during continuous shooting. This is effective for shooting when it is difficult to adjust the picture brightness. Option Description Select Bracketing off (default setting), 3, or 5 for the number of…

• Page 154: Af Area Mode

  AF Area Mode Rotate the mode dial to A, B, C or D M d button M A, B, C or D menu icon M AF area mode M k button Set how the camera selects the focus area for autofocus. Option Description When the camera detects a…

• Page 155
  Option Description Use the multi selector HIJK to move the focus area to where you want to focus. To use the multi selector to configure the flash mode or other settings, press the k button. To return to moving the focus area, press the k button again.
• Page 156
  Using Subject Tracking Rotate the mode dial to A, B, C or D M d button M A, B, C or D menu icon M AF area mode M k button M s Subject tracking M k button M d button Register a subject.

• Page 157: Autofocus Mode

  Autofocus Mode Rotate the mode dial to A, B, C or D M d button M A, B, C or D menu icon M Autofocus mode M k button Set how the camera focuses when shooting still images. Option Description The camera focuses only when the shutter-release button is A Single AF pressed halfway.

• Page 158: Noise Reduction Filter

  Noise Reduction Filter Rotate the mode dial to A, B, C, or D M d button M A, B, C, or D menu icon M Noise reduction filter M k button Set the strength of the noise reduction function that is normally performed when saving images.

• Page 159: The Movie Menu

  The Movie Menu Movie Options Enter shooting mode M d button M e menu icon M Movie options M k button Select the desired movie option to record. Select normal speed movie options to record at normal speed, or HS movie options (A147) to record in slow or fast motion. The movie options that can be selected vary depending on the Frame rate setting (A152).

• Page 160
  Normal Speed Movie Options Aspect ratio Max. recording time Option (Image size/ Image size (horizontal to per file Frame rate, File format) vertical) (approx.) 1, 2 d 2160/30p (4K UHD) 3840 × 2160 16:9 9 min 1, 2 c 2160/25p (4K UHD) e 1080/30p S 1080/25p 1920 ×…
• Page 161
  HS Movie Options Recorded movies are played back in fast or slow motion. See “Recording Movies in Slow Motion and Fast Motion (HS Movie)” (A149). Image size Option Aspect ratio Description (horizontal to vertical) 1/4-speed slow motion movies 1280 × 720 Max.
• Page 162
  Playing Back in Slow Motion and Fast Motion When recording at normal speed: Recording 10 s time Playback 10 s time When recording at h HS 720/4×: Movies are recorded at 4× normal speed. They are played back in slow motion at 4× slower speed. Recording 10 s time…
• Page 163
  Recording Movies in Slow Motion and Fast Motion (HS Movie) Enter shooting mode M d button M e menu icon M Movie options M k button Movies recorded using HS movie can be played back in slow motion at 1/4 or 1/2 of the normal playback speed, or in fast motion at twice the normal playback speed.

• Page 164: Autofocus Mode

  Autofocus Mode Enter shooting mode M d button M e menu icon M Autofocus mode M k button Set how the camera focuses in short movie show mode or when recording movies. Option Description Focus is locked when movie recording starts. A Single AF Select this option when the distance between the camera and the (default setting)

• Page 165: Movie Vr

  Movie VR Enter shooting mode M d button M e menu icon M Movie VR M k button Select the vibration reduction setting used in short movie show mode or when recording movies. Select Off when using a tripod to stabilize the camera during recording. Option Description Performs optical compensation for camera shake using the lens…

• Page 166: Wind Noise Reduction

  Wind Noise Reduction Enter shooting mode M d button M e menu icon M Wind noise reduction M k button Option Description Reduces the sound that is produced when wind passes over Y On the microphone during movie recording. Other sounds may become difficult to hear during playback.

• Page 167: The Playback Menu

  The Playback Menu See “Editing Images (Still Images)” (A88) for information about image editing functions. Mark for Upload Press the c button (playback mode) M d button M Mark for upload M k button Select still images in the camera and upload them to a smart device that has a wireless connection established with the SnapBridge app.

• Page 168: Slide Show

  Slide Show Press the c button (playback mode) M d button M Slide show M k button Play back images one by one in an automated “slide show.” When movie files are played back in the slide show, only the first frame of each movie is displayed. Use the multi selector HI to select Slide show Start and press the k button.

• Page 169: Protect

  Protect Press the c button (playback mode) M d button M Protect M k button The camera protects selected images from accidental deletion. Select images to protect or cancel protection from the image selection screen (A122). Note that formatting the memory card or the camera’s internal memory permanently deletes all data including protected files (A173).

• Page 170: Copy (Copy Between The Memory Card And Internal Memory)

  Copy (Copy Between the Memory Card and Internal Memory) Press the c button (playback mode) M d button M Copy M k button Images can be copied between a memory card and the internal memory. When a memory card that contains no images is inserted and the camera is switched to playback mode, Memory contains no images.

• Page 171: Sequence Display

  Sequence Display Press the c button (playback mode) M d button M Sequence display M k button Select the method used to display images in the sequence (A86). Option Description Displays each image in a sequence individually. Individual pictures F is displayed on the playback screen. C Key picture only Displays only the key picture for images in a sequence.

• Page 172: The Network Menu

  The Network Menu Press the d button M J menu icon M k button Configure the wireless network settings to connect the camera to a smart device or the ML-L7 Remote Control (available separately). When you establish a wireless connection between the camera and a smart device with the SnapBridge app installed, you can upload images captured with the camera to the smart device or perform remote photography.

• Page 173
  Option Description SSID*: Change the SSID. Set a 1- to 32-character alphanumeric SSID. Auth./encryp.: Select whether or not to encrypt the communications between the camera and the connected smart device. Communications are not encrypted when Open is Network selected. settings Wi-Fi Password*: Set the password.

• Page 174: Operating The Text Input Keyboard

  Operating the Text Input Keyboard Use the multi selector HIJK to select Text field alphanumeric characters. Press the k button to enter the selected character in the text field and move the cursor to the next space. Select the change character type icon and press the k button to change the character type.

• Page 175: The Setup Menu

  The Setup Menu Time Zone and Date Press the d button M z menu icon M Time zone and date M k button Set the camera clock. Option Description Sync with Select On to synchronize the date and time setting with a smart device. smart device Enable the clock synchronization function of the SnapBridge app.

• Page 176
  Select w Home time zone or x Time zone Travel destination and press the k Home time zone button. Travel destination The date and time displayed on the screen changes depending on whether the home London, Casablanca time zone or travel destination is selected. 15/11/2019 15:30 UTC+0 Press K.

• Page 177: Monitor Settings

  Monitor Settings Press the d button M z menu icon M Monitor settings M k button Option Description Photo info Set whether or not to display information on the screen. Adjust the monitor brightness. Monitor brightness Default setting: 3 Adjust the viewfinder brightness. EVF brightness Default setting: 3 The descriptions of functions are displayed while changing the…

• Page 178
  Shooting mode Playback mode 4 / 4 4 / 4 0 . 0 0 . 0 Framing 2 5 m 0 s 2 5 m 0 s 1 0 0 — 0 0 0 4 . J P G 1 0 0 — 0 0 0 4 . J P G 1 0 0 1 0 0 1 / 2 5 0…

• Page 179: Evf Auto Toggle (Automatically Switching The Display To The Viewfinder)

  EVF Auto Toggle (Automatically Switching the Display to the Viewfinder) Press the d button M z menu icon M EVF auto toggle M k button Option Description When you bring your face close to the viewfinder, the eye sensor responds to it and the display is automatically switched from the (default setting) monitor to viewfinder.

• Page 180: Date Stamp

  Date Stamp Press the d button M z menu icon M Date stamp M k button The shooting date and time can be stamped on images when shooting. 1 5 . 1 1 . 2 0 1 9 1 5 . 1 1 . 2 0 1 9 Option Description W Date…

• Page 181: Self-Timer: After Release

  Self-timer: After Release Press the d button M z menu icon M Self-timer: after release M k button Set whether to cancel the self-timer after using it to shoot (A61). Option Description The self-timer is canceled after shooting. After shooting in Multiple exp. Lighten scene mode, o Exit self-timer mode self-timer is not canceled.

• Page 182: Photo Vr

  Photo VR Press the d button M z menu icon M Photo VR M k button Select the vibration reduction setting used when shooting still images. Select Off when using a tripod to stabilize the camera during shooting. Option Description Performs compensation for camera shake using lens shift VR.

• Page 183: Af Assist

  AF Assist Press the d button M z menu icon M AF assist M k button Option Description The AF-assist illuminator automatically lights up when you press the shutter-release button under dim lighting. The illuminator has a range of about 3.5 m (11 ft) at the maximum a Auto wide-angle position and about 5.0 m (16 ft) at the maximum (default setting)

• Page 184: Assign Side Zoom Control

  Assign Side Zoom Control Press the d button M z menu icon M Assign side zoom control M k button Choose the function to be performed during shooting when the side zoom control is moved. Option Description Y Zoom (default setting) Adjust the zoom (A70).

• Page 185: Ae/Af Lock Button

  AE/AF Lock Button Press the d button M z menu icon M AE/AF lock button M k button Choose the function to be performed during shooting when the g (AE-L/AF-L) button (A3) is pressed. Option Description a AE/AF lock Hold down the g button to lock both the focus and exposure. (default setting) b AE lock only Hold down the g button to lock the exposure.

• Page 186: Sound Settings

  Sound Settings Press the d button M z menu icon M Sound settings M k button Option Description When On (default setting) is selected, the camera produces one beep when operations are performed, two beeps when focus is acquired on the subject, and three beeps when an Button sound error occurs.

• Page 187: Format Card/Format Memory

  Format Card/Format Memory Press the d button M z menu icon M Format card/Format memory M k button Use this option to format a memory card or the internal memory. Formatting the memory cards or internal memory permanently deletes all data.

• Page 188: Language

  Language Press the d button M z menu icon M Language M k button Select a language for display of camera menus and messages. HDMI Output Press the d button M z menu icon M HDMI output M k button Select the image resolution when outputting through HDMI.

• Page 189: Charge By Computer

  Charge by Computer Press the d button M z menu icon M Charge by computer M k button Option Description When the camera is connected to a computer that is running (A110), the battery inserted into the camera is automatically a Auto charged using power supplied by the computer.

• Page 190: Image Comment

  Image Comment Press the d button M z menu icon M Image comment M k button Attach a comment that was previously registered to images that will be captured. You can imprint the attached comment to images that will be sent to a smart device using the SnapBridge app.

• Page 191: Copyright Information

  Attach copyright info setting. Also, make sure that the artist name and copyright owner name are blank. Nikon is not responsible for any kind of trouble or damage resulting from the use of Copyright information.

• Page 192: Location Data

  Location Data Press the d button M z menu icon M Location data M k button Set whether or not to add shooting location information to the images that you take. Option Description Select Yes to add location information from the smart device Download from device to the images that you take.

• Page 193: Mf Peaking

  MF Peaking Press the d button M z menu icon M MF peaking M k button Option Description When operating E (manual focus), focusing is assisted by highlighting areas that are in focus in white on the image (default setting) displayed on the screen (A64, 65).

• Page 194: Conformity Marking

  Conformity Marking Press the d button M z menu icon M Conformity marking M k button View some of the conformity markings that the camera complies with. Firmware Version Press the d button M z menu icon M Firmware version M k button View the current camera firmware version.

• Page 195: Technical Notes

  Technical Notes Notices……………………… 182 Notes About Wireless Communication Functions ……….184 Caring for the Product ………………… 187 The Camera ……………………. 187 The Battery ……………………188 The Charging AC Adapter………………189 Memory Cards………………….190 Cleaning and Storage …………………. 191 Cleaning ……………………191 Storage …………………….

• Page 196: Notices

  Consult the dealer or an experienced radio/television technician for help. CAUTIONS Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment. Technical Notes Notices…

• Page 197
  Interface Cables Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.

• Page 198: Notes About Wireless Communication Functions

  (products purchased in the EU or EFTA can be used anywhere within the EU and EFTA). Nikon does not accept liability for use in other countries. Users who are unsure as to the original country of sale should consult with their local Nikon service center or Nikon-authorized service representative.

• Page 199
  Precautions when Exporting or Carrying This Product Abroad This product is controlled by the United States Export Administration Regulations (EAR). The permission of the United States government is not required for export to countries other than the following, which as of this writing are subject to embargo or special controls: Cuba, Iran, North Korea, Sudan, and Syria (list subject to change).
• Page 200
  Notice for Customers in Europe Declaration of Conformity (Europe) Hereby, Nikon Corporation declares that the radio equipment type COOLPIX A1000 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://imaging.nikon.com/support/pdf/DoC_N1721.pdf.

• Page 201: Caring For The Product

  Caring for the Product Observe the precautions described below in addition to the warnings in “For Your Safety” (Avi-ix) when using or storing the device. The Camera Do Not Apply Strong Impact to the Camera The product may malfunction if subjected to strong shock or vibration. In addition, do not touch or apply force to the lens or lens cover.

• Page 202: The Battery

  If you notice any abnormalities such as excessive heat, smoke, or an unusual smell coming from the battery, immediately discontinue use and consult your retailer or Nikon- authorized service representative. After removing the battery from the camera or optional battery charger, put the battery in a plastic bag, etc.

• Page 203: The Charging Ac Adapter

  Battery Terminals Dirt on the battery terminals may prevent the camera from functioning. Should the battery terminals become dirty, wipe them off with a clean, dry cloth before use. Charging an Exhausted Battery Turning the camera on or off while an exhausted battery is inserted in the camera may result in reduced battery life.

• Page 204: Memory Cards

  Memory Cards Precautions for Use Use only Secure Digital memory cards (A216). Be sure to follow the precautions described in the documentation included with the memory card. If the write-protect switch of the memory card is locked, you cannot shoot, delete images, or format the memory card. Do not put labels or stickers on memory cards.

• Page 205: Cleaning And Storage

  Cleaning and Storage Cleaning Do not use alcohol, thinner, or other volatile chemicals. Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end).

• Page 206: Error Messages

  Error Messages Refer to the table below if an error message is displayed. Display Cause/Solution Battery temperature is elevated. The The camera turns off automatically. Wait until the camera will turn off. camera or battery temperature has cooled before – The camera will turn resuming use.

• Page 207
  – and then on again. If the error persists even after turning the camera off and then on again, contact your retailer or Nikon- authorized service representative. Communications An error occurred while communicating with the printer.
• Page 208
  Display Cause/Solution Printer error: check After solving the problem, select Resume and press the – k button to resume printing.* printer status. Printer error: check Load the specified size of paper, select Resume, and – press the k button to resume printing.* paper.

• Page 209: Troubleshooting

  Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Power, Display, Settings Issues Problem Cause/Solution Wait for recording to end. If the problem persists, turn the camera off.

• Page 210
  Problem Cause/Solution Confirm all connections. When connected to a computer, the camera may not charge for any of the reasons described below. — Off is selected for Charge by computer in the setup menu. — Battery charging stops if the camera is turned off. –…
• Page 211
  Problem Cause/Solution No information Hide info is selected for Photo info in Monitor settings displayed on the in the setup menu. screen. Date stamp not Time zone and date has not been set in the setup menu. available. Date not stamped The date cannot be stamped with certain shooting on images even modes or when using certain settings in other functions.
• Page 212
  Shooting Issues Problem Cause/Solution Cannot switch to Disconnect the USB cable. shooting mode. When the camera is in playback mode, press the c 2, 27 button, shutter-release button, or b(e) button. When menus are displayed, press the d button. The flash is charging while K is flashing. Cannot take Movies cannot be recorded when the camera is pictures or record…
• Page 213
  Problem Cause/Solution Use the flash. Increase the ISO sensitivity value. Images are Enable Photo VR when shooting still images. Enable 151, blurred. Movie VR when recording movies. Use a tripod to stabilize the camera (using the self-timer at the same time is more effective). Bright specks Flash is reflecting off particles in the air.
• Page 214
  Problem Cause/Solution The flash is lowered, or a shooting mode that restricts the 25, 58, flash is selected. The flash window is blocked. The subject is beyond the range of the flash. Images are too dark Adjust exposure compensation. 66, 68 (underexposed).
• Page 215
  Problem Cause/Solution When shooting with backlighting or when a very strong A ring-shaped light source (such as sunlight) is in or out of the frame, a belt or rainbow- ring-shaped belt or rainbow-colored stripe (ghosting) may colored stripe – occur. Change the position of the light source, or frame the appears on the picture so that the light source does not enter the frame, screen or images.
• Page 216
  External Device Issues Problem Cause/Solution When establishing a wireless connection for the first time, – refer to the instructions in the included “SnapBridge Connection Guide”. If a wireless connection is established, perform the – following operations. — Turn the camera off and then on again. — Restart the SnapBridge app.
• Page 217
  Problem Cause/Solution Perform the operations described below when uploading automatically. — Set Network menu M Send while shooting M Still images in the camera to Yes. — In the A tab of the SnapBridge app M Auto link – options M turn on Auto link. — In the A tab of the SnapBridge app M Auto link –…
• Page 218
  The camera is not recognized by the computer. – computer. The computer is not set to start Nikon Transfer 2 – automatically. For more information about Nikon Transfer 2, refer to help information contained in ViewNX-i.
• Page 219
  Problem Cause/Solution The camera cannot be used to select the paper size in the following situations, even when printing from a PictBridge- Cannot select compatible printer. Use the printer to select the paper size. paper size with – The printer does not support the paper sizes specified by the camera.

• Page 220: File Names

  File Names Images or movies are assigned file names as follows. File name: DSCN 0001 .JPG Not shown on the screen of the camera. DSCN: Original still images, movies, still images created by the movie editing function (1) Identifier RSCN: Cropped copies FSCN: Images created by an image editing function other than crop, movies created by the movie editing function Assigned in ascending order, starting with “0001”…

• Page 221: Accessories

  Accessories MH-65 Battery Charger Battery charger Charging time is about 2 hours and 30 minutes for a fully exhausted battery. EH-62F AC Adapter (connect as shown) AC adapter Make sure that the power connector cable is fully inserted in the power connector slot before inserting the AC adapter into the battery chamber.

• Page 222: Ml-L7 Remote Control

  You can pair (A210) the separately available ML-L7 Remote Control with the camera, and use it to operate the camera. The operations described in “Parts and Functions of the Remote Control (for COOLPIX A1000)” (A208) can be performed when shooting with this camera.

• Page 223
  (Function 1) / w2 Cannot be used with this camera. (Function 2) buttons Status Lamp on the Remote Control (for COOLPIX A1000) Color Status Description Remote control is searching for a camera…
• Page 224
  Pairing the Camera and Remote Control Before using the remote control for the first time, it must be paired with the camera. Press the d button on the camera. Press the multi selector J, use HI to select the J menu icon, and press the k button.
• Page 225
  Press and hold (for at least 3 seconds) the power button on the remote control. Pairing starts for the camera and remote control. During the process, the status lamp on the remote control flashes about every 0.5 seconds. When pairing is complete, a connection is established between the camera and the remote control.

• Page 226: Specifications

  Specifications Nikon COOLPIX A1000 Digital Camera Type Compact digital camera Number of effective 16.0 million (Image processing may reduce the number of pixels effective pixels.) Image sensor 1/2.3-in. type CMOS; approx. 16.79 million total pixels Lens NIKKOR lens with 35× optical zoom 4.3–151 mm (angle of view equivalent to that of 24–840 mm…

• Page 227
  Media Internal memory (approx. 81 MB), SD/SDHC/SDXC memory card File system DCF and Exif 2.31 compliant Still images: JPEG, RAW (NRW) (Nikon’s own format) File formats Movies: MP4 (Video: H.264/MPEG-4 AVC, Audio: AAC stereo) Image size 16 M 4608×3456, 8 M 3264×2448, 4 M 2272×1704, 2 M 1600×1200,…
• Page 228
  Wi-Fi (Wireless LAN) Standards IEEE 802.11b/g (standard wireless LAN protocol) Operating frequency 2412–2462 MHz (channels 1-11) Maximum output 9.98 dBm (EIRP) power Authentication Open system, WPA2-PSK Bluetooth Communication Bluetooth Specification Version 4.1 protocols Bluetooth: 2402–2480 MHz Operating frequency Bluetooth Low Energy: 2402–2480 MHz Maximum output Bluetooth: 3.54 dBm (EIRP) power…
• Page 229
  D AC, E DC, F Class II equipment (The construction of the product is double-insulated.) Nikon will not be held liable for any errors this manual may contain. The appearance of this product and its specifications are subject to change without notice.

• Page 230: Memory Cards That Can Be Used

  Corporation in the United States and/or other countries. ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Nikon Corporation is under license. Apple®, App Store®, the Apple logos, Mac, OS X, macOS, iPhone®, iPad®, iPod touch®…

• Page 231
  Alliance. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are the trademarks or registered trademarks of their respective holders. Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple products identified in the badge, and has been certified by the developer to meet Apple performance standards.

• Page 232: Index

  Index AF area mode……69, 123, 140 Symbols A Auto mode……..31, 32 AF assist ……….126, 169 o Creative mode……31, 51 AF-assist illuminator……..2 y Scene mode……31, 33 Airplane mode …….. 125, 158 Aperture-priority auto mode ..31, 53 C Aperture-priority auto mode …………….

• Page 233
  Choose connection ….. 125, 158 Extracting still images….106, 108 Clock…………20, 161 Eye sensor ……….3, 26 Close-up k ……….. 33, 36 Eyelet for strap………. 2, 15 Color temperature……..131 Command dial ……..2, 6, 53 Face detection ……….75 Computer……….
• Page 234
  MF peaking……..126, 179 HDMI cable……… 110, 111 Microphone (stereo)……..2 HDMI micro connector….3, 110 Micro-USB connector HDMI output ……..126, 174 ………. 3, 17, 110, 112, 116 HDR…………..37 Mode dial……..2, 4, 23, 31 Help display ……….163 Monitor ……..
• Page 235
  Power…………..20 Shooting mode ……….31 Power switch/power-on lamp..3, 20 Short movie show menu ….. 103 Pre-focus…………143 Short movie show mode….. 31, 103 Preset manual……….132 Shutter sound……..47, 172 Pre-shooting cache…… 134, 135 Shutter speed ……..53, 56 Pressing halfway ……
• Page 236
  Time-lapse movie N….. 33, 101 Toggle Av/Tv selection….126, 178 Touch panel…………7 Touch shooting……..26, 72 Touch-screen controls ….126, 179 Tripod socket ……..3, 214 TV………….. 110, 111 USB cable ……17, 110, 112, 116 Viewfinder……. 3, 10, 26, 191 ViewNX-i …………
• Page 237
  No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. CT8L01(11) 6MQ00811-01 2019…

Подробные сведения об инструкции:

Устройство из раздела: цифровой фотоаппарат

Бренд-производитель: NIKON

Наименование модели: NIKON Nikon Coolpix A1000

Язык: Руководство на русском языке

Файл: pdf

Размер файла: 2,96 MB