Msi b450m pro vdh max мануал

Thank you for purchasing the MSI® B450M PRO-VDH MAX motherboard. This User Guide gives information about board layout, component overview, BIOS setup and software installation.

Safety Information

yThe components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly.

yEnsure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.

yHold the motherboard by the edges to avoid touching sensitive components.

yIt is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.

yStore the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.

yBefore turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.

yDo not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.

yIf you need help during any installation step, please consult a certified computer technician.

yAlways turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.

yKeep this user guide for future reference.

yKeep this motherboard away from humidity.

yMake sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.

yPlace the power cord such a way that people can not step on it. Do not place anything over the power cord.

yAll cautions and warnings on the motherboard should be noted.

yIf any of the following situations arises, get the motherboard checked by service personnel:

Liquid has penetrated into the computer.

The motherboard has been exposed to moisture.

The motherboard does not work well or you can not get it work according to user guide.

The motherboard has been dropped and damaged.

The motherboard has obvious sign of breakage.

yDo not leave this motherboard in an environment above 60°C (140°F), it may damage the motherboard.

Specifications

y1x PCIe 3.0 x16 slot

1st, 2nd and 3rd Gen AMD Ryzen™ support x16 mode

y2x PCIe 2.0 x1 slots

y1x VGA port, supports a maximum resolution of 2048×1280@60Hz, 1920×1200@60Hz*

y1x DVI-D port, supports a maximum resolution of 1920×1200@60Hz*

Package contents

Please check the contents of your motherboard package. It should contain:

yMotherboard

yDriver DVD

yQuick Installation Guide

yI/O Shielding

ySATA 6G Cable x2

yCase Badge

yProduct registration card

yM.2 Screw x1

Important

If any of the above items are damaged or missing, please contact your retailer.

Rear I/O Panel

LAN Port LED Status Table

Audio 7.1-channel Configuration

To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1 connector and follow the below steps.

1.Click on the Realtek HD Audio Manager > Advanced Settings to open the dialog below.

2.Select Mute the rear output device, when a front headphone plugged in.

3.Plug your speakers to audio jacks on rear and front I/O panel. When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.

CPU Socket

Please install the CPU into the CPU socket as shown below.

2

3

Important

yWhen changing the processor, the system configuration could be cleared and reset BIOS to default values due to the AM4 processor’s architecture.

yAlways unplug the power cord from the power outlet before installing or removing the CPU.

yWhen installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.

yConfirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.

yOverheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.

yIf you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation.

Important

yAlways insert memory modules in the DIMMA2 slot first.

yDue to chipset resource usage, the available capacity of memory will be a little less than the amount of installed.

yBased on processor specification, the Memory DIMM voltage below 1.35V is suggested to protect the processor.

yDue to AM4 CPU/memory controller official specification limitation, the frequency of memory modules may operate lower than the marked value under the default state. Please refer www.msi.com for more information on compatible memory.

PCI_E1~3: PCIe Expansion Slots

Important

yWhen adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.

yIf you install a large and heavy graphics card, you need to use a tool such as MSI Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot.

JFP1, JFP2: Front Panel Connectors

These connectors connect to the switches and LEDs on the front panel.

SATA1~4: SATA 6Gb/s Connectors

These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device.

SATA1

SATA4

SATA2

SATA3

Important

yPlease do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise.

ySATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.

M2_1: M.2 Slot (Key M)

Please install the M.2 solid-state drive (SSD) into the M.2 slot as shown below.

ATX_PWR1, CPU_PWR1: Power Connectors

These connectors allow you to connect an ATX power supply.

Important

Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.

JUSB1~2: USB 2.0 Connectors

These connectors allow you to connect USB 2.0 ports on the front panel.

Important

yNote that the VCC and Ground pins must be connected correctly to avoid possible damage.

yIn order to recharge your iPad,iPhone and iPod through USB ports, please install MSI® SUPER CHARGER utility.

JUSB3: USB 3.2 Gen1 Connector

This connector allows you to connect USB 3.2 Gen1 ports on the front panel.

Important

Note that the Power and Ground pins must be connected correctly to avoid possible damage.

CPU_FAN1, SYS_FAN1~2: Fan Connectors

Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. When you plug a 3-pin (Non-PWM) fan to a fan connector in PWM mode, the fan speed will always maintain at 100%, which might create a lot of noise. You can follow the instruction below to adjust the fan connector to PWM or DC Mode.

Switching fan mode and adjusting fan speed

You can switch between PWM mode and DC mode and adjust fan speed in BIOS > HARDWARE MONITOR.

Select PWM mode or DC mode

There are gradient points of the fan speed that allow you to adjust fan speed in relation to CPU temperature.

Important

Make sure fans are working properly after switching the PWM/ DC mode.

JTPM1: TPM Module Connector

This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.

JCI1: Chassis Intrusion Connector

This connector allows you to connect the chassis intrusion switch cable.

Using chassis intrusion detector

1.Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.

2.Close the chassis cover.

3.Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.

4.Set Chassis Intrusion to Enabled.

5.Press F10 to save and exit and then press the Enter key to select Yes.

6.Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on.

Resetting the chassis intrusion warning

1.Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.

2.Set Chassis Intrusion to Reset.

3.Press F10 to save and exit and then press the Enter key to select Yes.

JAUD1: Front Audio Connector

This connector allow you to connect audio jacks on the front panel.

JCOM1: Serial Port Connector

This connector allows you to connect the optional serial port with bracket.

JLPT1: Parallel Port Connector

This connector allows you to connect the optional parallel port with bracket.

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory.

Resetting BIOS to default values

1.Power off the computer and unplug the power cord.

2.Use a jumper cap to short JBAT1 for about 5-10 seconds.

3.Remove the jumper cap from JBAT1.

4.Plug the power cord and power on the computer.

EZ Debug LED: Debug LED indicators

These LEDs indicate the status of the motherboard.

CPU — indicates CPU is not detected or fail.

DRAM — indicates DRAM is not detected or fail.

VGA — indicates GPU is not detected or fail.

BOOT — indicates booting device is not detected or fail.

JRGB1: RGB LED strip connector

This connector allows you to connect the 5050 RGB LED strip.

Important

yThis connector supports 5050 RGB multi-color LED strips (12V/G/R/B) with the maximum power rating of 3A (12V). Please keeping the LED strip shorter than 2 meters to prevent dimming.

yAlways turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip.

yPlease use MSI’s software to control the extended LED strip.

BIOS Setup

The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.

Important

yBIOS items are continuous update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be held for reference only. You could also refer to the HELP information panel for BIOS item description.

yThe pictures in this chapter are for reference only and may vary from the product you purchased.

yThe BIOS items will vary with the processor.

Entering BIOS Setup

Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot Menu message appears on the screen during the boot process.

Function key

F1: General Help

F2: Add/ Remove a favorite item

F3: Enter Favorites menu

F4: Enter CPU Specifications menu

F5: Enter Memory-Z menu

F6: Load optimized defaults

F7: Switch between Advanced mode and EZ mode

F8: Load Overclocking Profile

F9: Save Overclocking Profile

F10: Save Change and Reset*

F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).

* When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.

Resetting BIOS

You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS:

yGo to BIOS and press F6 to load optimized defaults.

yShort the Clear CMOS jumper on the motherboard.

Important

Please refer to the Clear CMOS jumper section for resetting BIOS.

Updating BIOS

Updating BIOS with M-FLASH

Before updating:

Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive.

Updating BIOS:

1.Press Del key to enter the BIOS Setup during POST.

2.Insert the USB flash drive that contains the update file into the computer.

3.Select the M-FLASH tab and click on Yes to reboot the system and enter the flash mode.

4.Select a BIOS file to perform the BIOS update process.

5.After the flashing process is 100% completed, the system will reboot automatically.

Updating the BIOS with Live Update 6

Before updating:

Make sure the LAN driver is already installed and the Internet connection is set properly.

Updating BIOS:

1.Install and launch MSI LIVE UPDATE 6.

2.Select BIOS Update.

3.Click on Scan button.

4.Click on Download icon to download and install the latest BIOS file.

5.Click Next and choose In Windows mode. And then click Next and Start to start updating BIOS.

6.After the flashing process is 100% completed, the system will restart automatically.

Software Description

Please download and update the latest utilities and drivers at www.msi.com

Installing Windows® 10

1.Power on the computer.

2.Insert the Windows® 10 disc into your optical drive.

3.Press the Restart button on the computer case.

4.Press F11 key during the computer POST (Power-On Self Test) to get into Boot Menu.

5.Select your optical drive from the Boot Menu.

6.Press any key when screen shows Press any key to boot from CD or DVD…

message.

7.Follow the instructions on the screen to install Windows® 10.

Installing Drivers

1.Start up your computer in Windows® 10.

2.Insert MSI® Driver Disc into your optical drive.

3.The installer will automatically appear and it will find and list all necessary drivers.

4.Click Install button.

5.The software installation will then be in progress, after it has finished it will prompt you to restart.

6.Click OK button to finish.

7.Restart your computer.

Installing Utilities

Before you install utilities, you must complete drivers installation.

1.Insert MSI® Driver Disc into your optical drive.

2.The installer will automatically appear.

3.Click Utilities tab.

4.Select the utilities you want to install.

5.Click Install button.

6.The utilities installation will then be in progress, after it has finished it will prompt you to restart.

7.Click OK button to finish.

8.Restart your computer.

MSI® B450M PRO-VDH MAX. , , BIOS.

y (ESD).

y . ,.

y .

y ESD. ESD ,.

y .

y .

y . ,.

y .

y .

y . y .

y PSU PSU.

y . . y .

y , ..

.

..

.

y 60°C (140°F) . .

yCPU/y CPU/

yCPU/

. .: y

y DVD y y I/O

y SATA 6G 2 y

y y M.2 1

.

I/O

LAN LED

7.1-

7.1 I/O JAUD1 ..

1.Realtek HD Audio Manager(Realtek HD ) > Advanced Settings() .

2.Mute the rear output device, when a front headphone plugged in () .

3.I/O ..

CPU

CPU CPU .

4

y, AM4 BIOS.

yCPU .

yCPU , CPU . CPU.

yCPU .

yCPU CPU. CPU( ) .

yCPU / , /.

yDIMMA2 .

y.

yCPU CPU DIMM 1.35V .

yAM4 CPU/ . www.msi.com .

PCI_E1~3: PCIe

y..

y,MSI Gaming Series Graphics Card Bolster.

SATA1~4: SATA 6Gb/s

SATA 6Gb/s . SATA.

SATA1

SATA4

SATA2

SATA3

ySATA 90 . , .

ySATA .

M2_1: M.2 (Key M)

M.2 (SSD) M.2 .

ATX_PWR1, CPU_PWR1:

ATX .

JUSB1~2: USB 2.0

USB 2.0 .

yVCC .

yUSB iPad,iPhone iPod MSI® SUPER CHARGER

.

JUSB3: USB 3.2 Gen1

USB 3.2 Gen1 .

.

PWM DC BIOS > HARDWARE MONITOR() .

PWM DC

CPU .

PWM/ DC , .

JTPM1: TPM

TPM (Trusted Platform Module) .TPM .

JCI1:

.

1. JCI1 / . 2. .

3. BIOS > SETTINGS ( ) > Security( ) > Chassis Intrusion Configuration(

) .

4. Chassis Intrusion( ) Enabled( ) .

5. F10 . Enter Yes . 6. .

1.BIOS > SETTINGS ( ) > Security( ) > Chassis Intrusion Configuration() .

2.Chassis Intrusion( ) Reset( ) .

3.F10 . Enter Yes .

JAUD1:

.

JCOM1:

.

JLPT1:

.

JBAT1: CMOS (Reset BIOS)

CMOS. CMOS.

BIOS

1. . 2. JBAT1 5-10 .

3. JBAT1 .

4. .

EZ LED: LED

LED .

CPU— CPU .

DRAM — DRAM .

VGA — GPU .

BOOT — .

JRGB1: RGB LED

5050 RGB LED .

y3A (12V) 5050 RGB — LED (12V/G/R/B)

. LED 2m .

yRGB LED .

yMSI LED .

BIOS

. BIOS,

.

yBIOS .BIOS . BIOSHELP( ) .

y.

yBIOS .

BIOS

Press DEL key to enter Setup Menu, F11 to enter Boot Menu(DEL , F11 )Delete .

F1:

F2: /

F3:

F4: CPU

F5: Memory-Z

F6:

F7: EZ

F8:

F9:

F10: *

F12: USB (FAT/ FAT32 )

* F10 . Yes No .

BIOS

BIOS . BIOS.

y BIOS F6 . y CMOS .

BIOS CMOS .

BIOS

M-FLASH BIOS

BIOS MSI® BIOS USB.

BIOS :

1. POST Del BIOS .

2. USB .

3. M-FLASH Yes.

4. BIOS BIOS .

5. 100% .

Live Update 6 BIOS

LAN . BIOS :

1. MSI LIVE UPDATE 6 .

2. BIOS Update .

3. Scan .

4. Download BIOS .

5. Next In Windows mode Next Start BIOS

.

6. 100% .

www.msi.com.

Windows® 10

1. .

2. Windows® 10 .

3. Restart .

4. POST (Power-On Self Test) F11 .

5. .

6. Press any key to boot from CD or DVD….

7. Windows® 10 .

1. Windows® 10 .

2. MSI® .

3. .

4. Install .

5. . . 6. OK .

7. .

. 1. MSI® .

2. .

3. Utilities( ) .

4. .

5. Install( ) .

6. . . 7. OK( ) .

8. .

Merci d’avoir acheté une carte mère MSI® B450M PRO-VDH MAX. Ce manuel d’utilisateur fournit des informations sur le schéma, la vue d’ensemble des composants, la configuration du BIOS et l’installation des logiciels.

Informations de sécurité

y Les composants dans l’emballage peuvent être endommagés par des décharges électrostatiques (ESD). Pour vous assurer de correctement monter votre ordinateur, veuillez vous référer aux instructions ci-dessous.

y Assurez-vous de bien connecter tous les composants. En cas de mauvaise connexion, il se peut que l’ordinateur ne reconnaisse pas le composant et que le démarrage échoue.

y Veuillez tenir la carte mère par les bords pour éviter de toucher les composants sensibles.

y Il est recommandé de porter un bracelet antistatique lors de la manipulation de la carte mère pour prévenir tout dommage. Si vous n’avez pas de bracelet antistatique, touchez un objet métallique relié à la terre avant de manipuler la carte mère afin de vous décharger de votre charge statique. Touchez régulièrement l’objet métallique pendant toute la manipulation.

y Tant que la carte mère n’est pas installée, conservez-la dans un récipient protégé contre les ondes électrostatiques ou sur une couche antistatique.

y Avant de démarrer l’ordinateur, vérifiez si toutes les vis et les composants métalliques sont bien fixés sur la carte mère ou ailleurs dans le boîtier de l’ordinateur.

y Ne démarrez pas l’ordinateur avant d’avoir terminé l’installation. Ceci peut endommager les composants ou vous blesser.

y Si vous avez besoin d’aide pendant l’installation, veuillez consulter un technicien informatique certifié.

y Avant d’installer les composants d’ordinateur, veuillez toujours mettre hors tension et débrancher le cordon d’alimentation.

y Gardez ce manuel pour références futures. y Protégez ce manuel contre l’humidité.

y Avant de brancher le bloc d’alimentation sur la sortie électrique, veuillez vous assurer que la tension de la sortie électrique est bien égale à celle du bloc d’alimentation.

yPlacez le cordon d

yVeuillez prêter attention à toutes les alertes et remarques indiquées sur la carte mère.

yDans un cas comme ci-dessous, faites appel au service autorisé pour vérifier votre carte mère :

Un liquide a pénétré dans l’ordinateur.

La carte mère a été exposée à de l’humidité.

La carte mère ne fonctionne pas comme indiqué dans les instructions.

La carte mère est tombée par terre et a été endommagée.

La carte mère est cassée.

yNe pas mettre la carte mère dans un environnement dont la température est supérieure à 60°C (140°F) sous peine de l’endommager. ’’

Spécifications