Мануал на бмв s1000rr

1. Manuals
2. Brands
3. BMW Manuals
4. Motorcycle
5. S 1000 RR —
6. Rider’s manual

• Page 1
  BMW Motorrad Rider’s Manual (US Model) S 1000 RR…
• Page 2
  Motorcycle/Retailer Data Motorcycle Data Retailer Data Model Contact in Service Ms./Mr. Vehicle identification number Phone number Color number Initial registration Retailer’s address/phone number (com- License plate pany stamp)
• Page 3
  BMW motorcycle owners and riders. Familiarize yourself with Should you want to sell your your new motorcycle so that you BMW one day, please also re- can ride it safely and confidently member to turn over the Ride’s in all highway traffic situations.

• Page 4: Table Of Contents

  Table of Contents 3 Displays ….23 Tire Pressure Monitor Indicator and warning (TPM) ….. . . 70 1 General instructions .

• Page 5
  Adjusting clutch lever ..99 8 On the racetrack..129 9 Technology in de- Steering ….. 99 tail .
• Page 6
  ….. . 236 BMW Service … . . 236 Light sources .

• Page 7: General Instructions

  General instructions Overview ……6 Abbreviations and symbols ..6 Equipment .

• Page 8: Overview

  When the time comes to sell claims may be denied as a result. your BMW, please remember NOTICE Special informa- National-market version. to hand over this Rider’s Manual; tion on operating and in- it is an important part of the mo- Optional extra.

• Page 9: Equipment

  Dynamic Damping Con- trol. All dimensions, weights and per- The high safety and quality stan- formance data contained this dards of BMW motorcycles are Dynamic Traction Con- Rider’s Manual refer to the Ger- maintained by consistent, on- trol. man DIN standards and comply going development efforts em- with their tolerance specifications.

• Page 10: Additional Sources Of Information

  Depending on the country, BMW Motorrad retailers the vehicle owner can be iden- Data memory Your BMW Motorrad retailer is tified using the vehicle identifi- always happy to answer any of cation number and license plate General your questions.

• Page 11
  Qualified service partners The vehicle owner can have a Specialist workshops Operating data in the vehicle BMW Motorrad retailer or other Service providers qualified service partner or spe- Control units process data so Vehicle users may request in- cialist workshop read out the that the vehicle can run.
• Page 12
  Vehicle responses in specific The information can be read out recorder in the vehicle can be driving situations, such as acti- by a BMW Motorrad retailer or reset by a BMW Motorrad retailer vation of dynamic driving sys- or other qualified service partner…
• Page 13
  mation is transmitted to the mo- Data input and data transfer Data about the use of Inter- in the vehicle net services. This data can be bile end device. This includes for stored locally in the vehicle or instance position data and other General general vehicle data, depending is on a device connected to the…
• Page 14
  transmitter and receiver or via Any collection, processing and personally integrated mobile end use of personal data that goes devices such as smartphones. beyond the provision of services Online functions, as they are take place only as permitted by called, are used over this mobile law, on the basis of a contractual phone connection.

• Page 15: Overviews

  Overviews General view, left side ….15 General view, right side … . . 17 Underneath the seat ….18 Multifunction switch, left .

• Page 17: General View, Left Side

  General view, left side without Dynamic Damp- ing Control (DDC) without Dynamic Damp- Adjusting the compression ing Control (DDC) damping on rear wheel Adjusting the rebound- 105). stage damping on front without Dynamic Damp- wheel ( 104). ing Control (DDC) Adjusting the spring Adjusting spring preload at preload on the front wheel…

• Page 19: General View, Right Side

  General view, right side Brake-fluid reservoir, rear 176) Vehicle identification num- ber (on the steering-head bearing) Type plate (on the steering-head bearing) Brake-fluid reservoir, front 175) Checking coolant level 178) Engine oil indicator 171) Oil filler opening ( 173)

• Page 20: Underneath The Seat

  Underneath the seat Battery ( 193) Rider’s Manual (US Model) On-board tool kit ( 168) Data link connector 197) Fuses ( 196)

• Page 21: Multifunction Switch, Left

  Multifunction switch, left Deactivating DTC ( High-beam headlight and headlight flasher ( with cruise control Switch on cruise-control system ( 64). Hazard warning flashers with riding modes Pro Adapt DTC ( 139). Turn indicators ( Horn Multi-Controller Operating elements Rocker button MENU…

• Page 22: Right

  Multifunction switch, right with heated grips Heated handlebar grips 70). Riding mode ( Emergency on/off switch (kill switch) ( Starter button Start the engine ( 116). Race start with Launch Control ( 136)

• Page 23: Instrument Cluster

  Instrument cluster Indicator and warning lights Shiftpoint light ( 121) TFT display ( Anti-theft alarm LED with anti-theft alarm sys- tem (DWA) Alarm signal ( Photosensor (for adjusting brightness of instrument lighting)

• Page 25: Displays

  Displays Indicator and warning lights ..24 TFT display in Pure Ride view ..25 TFT display in the View menu ..27 Warning lights .

• Page 26: Indicator And Warning Lights

  Indicator and warning lights Turn indicator, left Operating turn signals 60). High beam ( General warning light Turn indicator, right DTC ( ABS ( 149)

• Page 27: Tft Display In Pure Ride View

  TFT display in Pure Ride view Hill Start Control ( Tachometer ( Speedometer Rider info. status line with cruise control Switch on cruise-control system ( 64). RACE PRO riding mode with riding modes Pro Configuration for the race- track ( 135) Switch Speed Limit Info on or off (…

• Page 28
  12 Connection status ( 13 Mute ( 14 Operating assistance 15 Heated grip settings…

• Page 29: Tft Display In The View Menu

  TFT display in the View menu Hill Start Control ( Speedometer with cruise control Switch on cruise-control system ( 64). Switch Speed Limit Info on or off ( 83). with riding modes Pro Adapt DTC ( 139). RACE PRO riding mode with riding modes Pro Configuration for the race- track (…

• Page 30: Warning Lights

  Warning lights 12 Mute ( 13 Operating assistance Display 14 Heated grip settings Warnings are displayed with ap- propriate warning lights. 15 Menu area Warnings are indicated by the general warning light in conjunc- tion with a dialog in the TFT display.

• Page 31
  White: (—) there is no valid value. Instead of the value, dashes 5 are displayed. NOTICE The evaluation of the individual values is possible in part only af- ter a certain riding duration or speed. If a measured value can- Value display Check Control dialog not yet be displayed due to un-…
• Page 32
  again as long as the error per- sists.
• Page 33
  Overview of warning indicators Indicator and warning Display text Meaning lights Displayed in yellow. Vehicle voltage too low ( General warning light lights up yel- low. Vehicle voltage low. Displayed in red. Vehicle voltage critical ( General warning light shows red. Vehicle voltage critical! General warning…
• Page 34
  Indicator and warning Display text Meaning lights General warning Coolant temper- Coolant temperature too high ( ature too high! light shows red. General warning No communica- Engine control failure ( light lights up yel- tion with en- low. gine control. General warning Fault in the en- Engine in emergency-operation mode…
• Page 35
  Indicator and warning Display text Meaning lights Tire pressure Tire pressure is outside the approved not at tolerance range ( setpoint. Tire press. monitor. Loss of pressure. «—» Transmission fault ( General warning «—» Sensor faulty or system fault ( light lights up yel- low.
• Page 36
  Indicator and warning Display text Meaning lights Side stand mon- Side stand monitoring faulty ( itoring faulty. ABS indicator ABS self-diagnosis not completed and warning light flashes. ABS indicator and ABS deactivated ( warning light lights ABS indicator and Limited ABS ABS fault ( availability! warning light lights…
• Page 37
  Indicator and warning Display text Meaning lights DTC indicator DTC self-diagnosis not completed and warning light flashes slowly. DTC indicator and Off! DTC switched off ( warning light lights Traction con- trol deacti- vated. DTC indicator and Traction con- DTC error ( warning light lights trol failure! Traction con-…
• Page 38
  Indicator and warning Display text Meaning lights Fuel reserve is be- Fuel down to reserve ( ing used up. Drive to the nearest filling station. Green stop symbol Hill Start Control active ( is displayed. Yellow stop symbol Hill Start Control is automatically deacti- flashes.
• Page 39
  Indicator and warning Display text Meaning lights L-Con not Shiftpoint light Launch Control not ready ( available. lights up or flashes. Clutch too hot. is displayed. Displayed in white. Service due ( Service due! Displayed in yellow. General warning Service date missed ( light lights up yel- low.
• Page 40
  If the 12-V battery is inserted preferably an authorized incorrectly or the terminals re- WARNING BMW Motorrad retailer. versed (e.g. when jump starting), it can blow the fuse for the alter- Failure of vehicle systems Vehicle voltage critical nator regulator.
• Page 41
  For de- Front parking lamp tails please contact a special- Anti-theft alarm faulty! ist service facility, preferably batt. capacity low. an authorized BMW Motorrad Tail light faulty! No limitations. Arrange Retailer. an appointment at a Possible cause: specialist workshop.
• Page 42
  Engine damage facility, preferably an authorized Operation of the anti-theft alarm Be sure to observe the mea- BMW Motorrad retailer. system is no longer ensured sures listed below. when the motorcycle’s battery Anti-theft alarm system Possible cause: is disconnected.
• Page 43
  Serious fault in en- rized BMW Motorrad retailer. Accident hazard gine control. Onward Engine control failure Avoid rapid acceleration and journey possible. Damage passing maneuvers.
• Page 44
  WARNING as soon as possible at an authorized specialist workshop, Damage to engine during preferably an authorized emergency operation BMW Motorrad retailer. Accident hazard Drive slowly and avoid rapid Tire inflation pressure acceleration and passing ma- with tire pressure monitor neuvers.
• Page 45
  Before adjusting the tire pres- For further information about compensation and are always sure, check the information on the BMW Motorrad tire pres- based on the following tire air temperature compensation and sure monitor, see the «Technol- temperature: tire pressure adjustment in the ogy in detail»…
• Page 46
  Displayed in red. Check the tires for damage and BMW Motorrad retailer. driveability. In the event of uncertainty about Tire pressure not at Can the tire still be driven on: the driveability of the tire: setpoint.
• Page 47
  Have fault eliminated at a spe- warning light also lights up cialist service facility, preferably cialist service facility, preferably is this a permanent fault. an authorized BMW Motorrad an authorized BMW Motorrad In this case: retailer. retailer. Have fault eliminated at a spe-…
• Page 48
  Contact an authorized service for a short time immediately fol- facility, preferably an authorized Possible cause: lowing the Pre-Ride-Check. BMW Motorrad retailer. The side-stand switch or its wiring is damaged. Possible cause: Motorcycle has fallen over Contact an authorized service…
• Page 49
  ( 155). preferably an authorized Possible cause: Have the malfunction corrected BMW Motorrad retailer. The ABS system was deacti- as soon as possible at an vated by the rider. authorized specialist workshop, preferably an authorized Switch on ABS function 150).
• Page 50
  DTC indicator and warning DTC indicator and warning to an ABS Pro fault message light flashes slowly. light lights up. 155). Off! Have the malfunction corrected as soon as possible at an authorized specialist workshop, preferably an authorized BMW Motorrad retailer.
• Page 51
  Possible cause: authorized specialist workshop, Secure vehicle tools. preferably an authorized The DTC control unit has de- Do not damage the rotational BMW Motorrad retailer. tected an error. speed sensor. Limited DTC availability ATTENTION It must be noted that only lim- ited DTC function is available.
• Page 52
  DTC fault preferably an authorized WARNING 158). BMW Motorrad retailer. Have the malfunction corrected In this state, the motorcycle is Rough engine running or as soon as possible at an probably heavily damped and is…
• Page 53
  Gear not trained shop, preferably an authorized when the side stand is folded out. BMW Motorrad retailer. The gear indicator flashes. Engine was stopped. The gearshift assistant Pro Hazard warning lights Hill Start Control is deactivated has no function.
• Page 54
  Shiftpoint light lights up or marks in the menu windows MY shop, preferably an authorized flashes. VEHICLE and SERVICE RE- BMW Motorrad retailer. L-Con not available. QUIREMENTS. The operating and road safety Clutch too hot. is displayed. of the vehicle remains un-…
• Page 55
  Have service performed reg- ularly by a specialist work- shop, preferably an authorized BMW Motorrad retailer. The operating and road safety of the vehicle remains un- changed. The best-possible value reten- tion of the vehicle is ensured.

• Page 57: Operation

  Operation Steering and ignition lock … 56 Rider and passenger seats ..72 Emergency on/off switch (kill switch) ……57 Lights .

• Page 58: Steering And Ignition Lock

  Steering and ignition Switching on ignition lock Vehicle keys You are provided with 2 ignition keys. Should you lose your keys, re- fer to the information regarding the electronic immobilizer (EWS) 57). Turn the ignition key to posi- A single key fits the steering and tion 1 while moving the handle- Turn vehicle key to position 1.

• Page 59: Emergency On/Off Switch

  Handlebars not locked. The vehicle key can now be If you lose one of your motorcy- removed. cle keys, you can have it disabled by your authorized BMW motor- EWS Electronic cycle retailer. immobilizer When having a key disabled you…

• Page 60: Lights

  Lights WARNING NOTICE Switch on low-beam Operation of the emergency The parking lights are a strain headlight ON/OFF switch when riding on the battery. Do not leave the Switch on the ignition. ignition switched on longer than Danger of falling due to blocking Start engine.

• Page 61: Hazard Warning Flashers

  Headlight courtesy delay Parking lights NOTICE feature Switch off ignition ( 57). Switch off ignition. The hazard warning flashers place a strain on the battery. Do not use the hazard warning flashers for longer than absolutely necessary. Immediately after switching off the ignition, push button 1 to Immediately after turning off left and hold it until the parking…

• Page 62: Turn Indicators

  Turn indicators Comfort turn signals Speed is above 60 mph (100 km/h): after flashing five Operating turn signals times. Switching on ignition ( 56). When button 1 is pressed and held slightly longer to the right or left, the turn signals will only turn off automatically after reaching the distance depending on the speed.

• Page 63
  DTC indicator and warning to flash if self-diagnosis has not light remains illuminated. been completed. Possible DTC system status ON The DTC function is switched is displayed. off. Release button 1 after Switching on DTC changeover of the status. DTC indicator and warning light remains off or contin- ues to flash.

• Page 64: Riding Mode

  ABS control, and DTC control Riding mode is provided for each of these sce- Use of the riding modes narios. BMW Motorrad has developed with Dynamic Damping Control riding scenarios for your motor- (DDC) cycle from which you can select…

• Page 65: Cruise-Control System

  played. The guide 4 shows how Cruise-control system Display while adjusting many riding modes are available. (road sign detection with cruise control active) Display while adjusting (road sign detection not active) Press button 1 repeatedly un- The symbol 1 for the cruise con- til the desired riding mode is trol is displayed in the Pure Ride shown.

• Page 66
  Switch on cruise-control Press button 1 forward and Adjustment range of hold. system cruise-control system The motorcycle accelerates with infinite variability (no 12…130 mph (20…210 km/h) steps). Cruise-control indicator light If button 1 is no longer lights up. pressed, the speed reached is maintained and saved.
• Page 67
  you might have intended slowing The motorcycle decelerates Cruise-control indicator light with infinite variability (no goes out. to a lower speed. steps). Cruise-control indicator light Resuming former cruising If button 1 is no longer lights up. speed pressed, the speed reached is maintained and saved.

• Page 68: Hill Start Control

  Hill Start Control Manually brake to secure the Hill Start Control is activated. vehicle. To switch off the.Hill Start Display Control, activate the handbrake lever 1 or the footbrake lever NOTICE again. Hill Start Control is only a con- Stop symbol disappears. venience system for easier hill- starting and should, therefore, Alternatively, drive off in 1st or…

• Page 69
  Switch Hill Start Control Hill Start Control Pro is now NOTICE activated. on and off To switch off Hill Start Con- Hill Start Control Pro drive-off Switching on ignition ( 56). trol Pro, activate the handbrake assistant should not be used for Go to menu Settings, Vehi- lever 1 or the footbrake lever gradients of more than 40%.

• Page 70: Shiftpoint Light

  Shiftpoint light Hill Start Control Pro is now To turn on automatic Hill Start deactivated. Control Pro, select Auto. Turning the shiftpoint More information about Hill Hill Start Control Pro can be light on and off Start Control Pro can be found activated by firmly applying the in the Technology in detail handbrake or footbrake lever.

• Page 71: Anti-Theft Alarm System

  The anti-theft alarm system is type of alarm sound can be set quency of 0 Hz corresponds to active. continuous lighting. by an authorized BMW Motorrad retailer. Changes to the brightness and Alarm signal the flashing frequency are sig- If an alarm was activated while…

• Page 72: Tire Pressure Monitor

  Deactivate DWA Switching the minimum clination of the vehicle. The anti- theft alarm system responds if, pressure warning on or off Switch on the ignition. for example, if the wheel is stolen Turn indicators light up once. The minimum pressure of the or the motorcycle is towed.

• Page 73: Onboard Computer

  The handlebar grips can be Scroll to the right until the ON- NOTICE heated at two different levels. BOARD COMPUTER menu win- dow is displayed. 50 % heating output The increase in power consumption caused by the Reset on-board computer heated grips can drain the 100 % heating output Call up on-board computer…

• Page 74: Rider And Passenger

  Install the hump cover Scroll to the right until the TRIP COMPUTER menu win- dow is displayed. Reset travel on-board computer Call up travel on-board com- puter ( 71). Press MENU rocker button down. Using the ignition key 1, unlock Select Automatic reset or the lock for the hump cover 2.

• Page 75
  Remove rider’s seat Using the ignition key 1, un- Position the passenger seat 1; lock the lock for the passenger hook in the fixing mechanism 2 Press the cover of the rider’s seat 2. when doing so. seat 1 slightly forward on the Remove the passenger seat 2 Press the passenger seat 1 seat surface and expose the…
• Page 76
  Installing rider’s seat Insert and position the rider’s seat 1 at the front in the fixing mechanism 4. Press the cover of the rider’s seat 1 slightly forward on the seat surface and expose the lug 2. Position and install the screw 3.

• Page 77: Tft Display

  TFT display General notes ….. . . 76 Principle ……77 Pure Ride view .

• Page 78: General Notes

  Connected App used if the TFT display is con- Do not use while riding (except With the BMW Motorrad Con- nected with a mobile end de- for applications without opera- nected App, you can call up in- vice and a helmet ( 86).

• Page 79: Principle

  Move cursor down in lists. On some mobile devices, e.g. Make settings. with operating system iOS, the Reduce volume. BMW Motorrad Connected App must be called up before using. Tilt Multi-Controller to the left: Notice concerning current Activate the function according status to the operating feedback.

• Page 80
  Operating instructions in Scroll to right in lists. In the Pure Ride view: change the operating focus to the navi- In the My Vehicle menu: leaf to the main menu gator. the next menu sheet. MENU short press down: Rocker button MENU functions Change a hierarchy level down.
• Page 81
  Operating instructions in on whether it is possible to re- turn to the top. submenus Operating instruction 2: an- In addition to the operating in- other submenu level can be structions in the main menu, called up. there are additional operating in- Operating instruction 3: there structions in submenus.
• Page 82
  Switching functions on Symbol 3 indicates that the Settings function can be switched off. Press Multi-Controller 1 re- and off Symbol 4 indicates that the peatedly briefly to the right un- function can be switched on. til the desired menu item is marked.
• Page 83
  down until the desired entry is Changing the display for The last used menu is called marked. up. The last marked entry is rider info status line selected. To move the cursor up in lists, Requirement turn the Multi-Controller 1 The vehicle is at a standstill.
• Page 84
  Select content of rider Driving time 1 info. status line Call up menu Settings, Driving time 2 Display, Status line content. Break 1 Turn on desired displays. It is possible to change be- tween the selected displays in Break 2 the rider info.

• Page 85: Pure Ride View

  Vehicle is connected to a com- gine speed range display will no patible mobile terminal. The longer change. BMW Motorrad Connected app The upshift recommendation is is installed on the mobile termi- adjusted dynamically as well. nal.

• Page 86: General Settings

  Range General settings The range is displayed to- gether with a warning once the Adjusting the volume fuel reserve is reached. Connect the rider’s helmet and After refueling, the range is re- the passenger helmet ( 87). calculated if the fuel quantity is Increase volume: turn Multi- greater than the fuel reserve.

• Page 87: Bluetooth

  Set clock Adjust language Reset all settings Call up menu Settings, Sys- All settings in the Settings Switching on ignition ( 56). menu can be reset to the fac- Call up menu Settings, Sys- tem settings, Language. tory settings. The following languages can be tem settings, Date and set: Call up menu Settings.

• Page 88
  On some mobile devices, e.g. no guarantee for smooth opera- with operating system iOS, the Perform pairing tion in every situation. BMW Motorrad Connected App Call up menu Settings, Con- must be called up before using. nections. Possible sources of…
• Page 89
  menu. The following Bluetooth Visible mobile end devices are If the Bluetooth connection connections are displayed: displayed. does not work as expected, the troubleshooting chart in the Select the mobile end device Mobile device Technical data chapter may and confirm. Rider’s helmet provide assistance.
• Page 90
  The connection is established and the connection status is updated. If the connection cannot be established, the troubleshoot- ing chart in the Technical data chapter may provide assis- tance. ( 213) If the Bluetooth connection does not work as expected, the troubleshooting chart in the Technical data chapter may provide assistance.

• Page 91: My Vehicle

  My vehicle Start screen Check Control display Display ( Coolant temperature Range ( Total mileage Service display ( Rear tire pressure ( Vehicle voltage ( 195) Front tire pressure (…

• Page 92
  Operating instructions Scroll through menu with tire pressure monitor (TPM) windows TIRE PRESSURE SERVICE REQUIREMENTS Further information on the tire pressure and CC messages can be found in the Displays chapter. NOTICE Check Control messages are Operating instruction 1: tab dynamically added as additional that shows how far to the left Go to menu My vehicle.
• Page 93
  Service requirement If the time remaining until the next service is less than a month, or if the next service is due within 700 miles (1000 km), a white CC message is displayed.

• Page 94: Navigation

  Navigation Operate these systems or de- Call up the BMW Motorrad vices only if the traffic situation Connected app and start the Warnings allows. route guidance. If necessary, stop and oper- Call up menu Navigation in WARNING ate the system or devices at a the TFT display.

• Page 95
  Switch spoken directions favorite in the BMW Motorrad Select special destination and Connected app. It is not confirm. on or off possible to create new favorites Select Start route guid- Connect the rider’s helmet and on the TFT display. ance and confirm.

• Page 96: Media

  Go to menu Media. The following functions can be NOTICE used in the context menu: Start playback or Pause BMW Motorrad recommends playback. setting the volume for media For search and playback, select and conversations via mobile end the category Now playing,…

• Page 97: Display Software Version

  Make a phone call Conversations with Display software multiple users version A second telephone call can be Call up menu Settings, In- accepted during a conversation. formation, Software ver- The first conversation will be put sion. on hold. The number of active telephone calls is displayed in the Display license Telephone menu.

• Page 99: Setting

  Setting Mirrors ……98 Headlight ……98 Brakes .

• Page 100: Mirrors

  If there are doubts as to the cor- rect headlight range, have the Headlight adjustment checked by a spe- Headlight adjustment, cialized workshop, preferably by an authorized BMW Motorrad right-hand/left-hand retailer. traffic This motorcycle’s headlight fea- Turn the adjustment wheel 1 tures a symmetrical low beam.

• Page 101: Adjusting Clutch Lever

  Steering NOTICE Adjusting the steering The adjustment wheel can be damper turned more easily if you press the handbrake lever forward when doing so. Adjustment options: from position 1: smallest dis- tance between handlebar grip Turn the adjustment wheel 1 and brake lever into the desired position.

• Page 102: Spring Preload

  Remove the engine jack. then 4 clicks in direction B. specialist workshop, preferably Park motorcycle on a level, firm (Racing mode) an authorized BMW Motorrad re- surface. tailer. Spring preload Load motorcycle with rider. Adjusting the spring…

• Page 103
  To reduce the compression Lift the motorcycle using the Adjustment of spring (increase the spring preload), engine jack until the rear wheel preload dependent on turn the adjustment screw 3 in has been fully relieved. loading direction A using a tool from the onboard tool kit.
• Page 104
  (compression) between the To increase the compression measured values. (reduce the spring preload), turn the adjustment ring 2 in Adjustment of spring direction B using a tool from preload dependent on the onboard tool kit. loading Tighten screw 1 to tightening torque.
• Page 105
  Place the motorcycle under NOTICE load with a rider and possibly with luggage. Settings on the DDC system With the assistance of a can only be made when the ig- 2nd person, measure the nition is switched on, as this is distance D between points 1 the only way the electric valves and 2 again and calculate…

• Page 106: Damping

  Damping mark 2 points to a higher scale value. Setting To decrease damping: turn Damping must be adjusted to the adjustment screw with tool road conditions and the spring from onboard tool kit so that preload. the mark 2 points to a lower A rough road surface requires scale value.

• Page 107
  mark 2 points to a higher scale value. To decrease damping: turn adjustment screw with tool from onboard tool kit so that the mark 2 points to a lower scale value. Rebound stage, basic setting, front Adjust rebound-stage damping Adjust compression damping Position 5 (Road mode with using adjustment screw 1 and via adjustment screw 1.
• Page 108
  To reduce damping: turn ad- CAUTION justment screw to the left in – direction using tool from on- Hot exhaust system board tool kit. Burn hazard Do not touch hot exhaust Compression stage, ba- system. sic setting, rear Park motorcycle on a level, firm Turn the adjustment screw 1 surface.

• Page 109: Ride Height

  187 lbs (85 kg)) your skill range, please contact a specialist workshop, preferably a Ride height Loosen clamping bolts 1. BMW Motorrad retailer. To increase the ride height, with Race package turn the adjustment screw 2 in Adjusting the ride height direction A.

• Page 110: Swinging Arm

  Adjust the ride height to the Tighten clamping bolts 1. swinging arm pivot point set- specialist workshop, preferably a Clamping bolt on adjust- ting: BMW Motorrad retailer. ment strut Adjusting the swinging 6 lb/ft (8 Nm) arm pivot point Remove engine jack.

• Page 111
  of 90° in each case to set the nector are fixed in the same desired position. position (mark). Install the fixing screw 1. Install the fixing screw 1. Position of swinging arm Position of swinging arm pivot point connector in pivot point connector in main frame on right main frame on left…

• Page 112: Ddc Calibration

  Calibrating the DDC Nut for swinging arm Nut on swing axle Place the motorcycle on the pivot point connector on side stand or a suitable auxiliary frame Thread-locking compound: stand. Do not sit on the mo- Thread-locking compound: mechanical torcycle during the calibration. Loctite 270, high-strength Remove any pieces of luggage.

• Page 113
  Select Repeat. If the calibration is still un- successful after several at- tempts, please contact a spe- cialist workshop, preferably an BMW Motorrad Partner.

• Page 115: Riding

  Riding Safety information ….114 Observe checklist ….115 Before every journey: .

• Page 116: Safety Information

  Your authorized cycle: Burn hazard BMW Motorrad retailer will be Settings of spring-strut and happy to advise you and has shock absorber system the correct clothing for every CAUTION Imbalanced load purpose.

• Page 117: Observe Checklist

  Catalytic converter Danger of overheating Observe checklist There is a danger of overheating Use the following checklist to ATTENTION and damage if misfiring causes check your motorcycle at regu- unburned fuel to enter the cat- lar intervals. Engine idling for a lengthy alytic converter.

• Page 118: Starting

  a gear engaged. The engine will Checking the rear brake pad NOTICE thickness ( 174). switch itself off if it is started with the transmission in neutral and Checking the front brake fluid The starting attempt is automati- then a gear is engaged before level ( 175).

• Page 119
  All indicator and warning lights The self-diagnosis routine checks tine not completed are switched on. whether the BMW Motorrad In- After a longer standstill of the tegral ABS is ready for opera- ABS function is not available vehicle, an animation is displayed tion.
• Page 120
  Phase 2 displayed. The self-diagnosis routine Check wheel sensors while Check the display of all indica- is determining whether starting off. tor and warning lights. BMW Motorrad DTC is ready for ABS indicator and warning operation. The self-diagnosis light flashes.

• Page 121: Breaking In

  (300…1000 km)) Have the malfunction corrected Brake early. as soon as possible at an No full throttle (Mileage authorized specialist workshop, 0…621 miles (0…1000 km)) preferably an authorized Observe mileage, after which BMW Motorrad retailer. the running-in check should be performed.

• Page 122: Shifting Gears

  When changing gear using the reaction. BMW Motorrad are run in. This running in proce- Pro Gear-shift Assistance func- recommends disengaging dure is essential if the tires are to…

• Page 123: Shiftpoint Light

  Vehicle settings disengaged at the same time. menu (also see the «Operation» Locking up of the front wheel chapter). is prevented by BMW Motorrad Race ABS. Brakes With the frequently instructed «forced braking,» in which the How do you achieve…

• Page 124
  ABS Pro front wheel to lock up with min- Delayed or poorer braking action imal braking action. This results must be expected in the follow- Physical riding limits in a reduced braking action. ing situations: When driving in the rain and WARNING Descending mountain through puddles.

• Page 125: Parking Your Motorcycle

  Falling cannot be excluded the braking effect and engages Always check that the ground if the throttle grip is accidentally under the stand is level and Although ABS Pro and pressed during braking. firm. Dynamic Brake Control represent valuable support and an Fold out side stand and park NOTICE enormous safety advantage for…

• Page 126
  Recommended fuel qual- ATTENTION WARNING Refueling with leaded fuel Escaping of fuel due to ex- Premium grade unleaded fuel pansion under exposure to Damage to catalytic converter (max. 5 % ethanol, E5) heat with overfilled fuel tank Do not refuel with leaded gaso- 91 AKI (98 ROZ/RON) Accident hazard line or gasoline with metallic…

• Page 127: Securing Motorcycle For Transporta

  ing until fuel is no higher than Fuel reserve lower edge of filler neck. NOTICE Approx. 1.1 gal (Approx. 4 l) If refueling is carried out after Press fuel tank cap down firmly running on fuel reserve, the re- to close. sulting filling capacity must be Remove the ignition key and greater than the fuel reserve so…

• Page 128
  Do not pinch components, e.g. brake lines or wiring harnesses. Lay straps at front over lower fork bridge on both sides. Tension straps downward. Remove the screws 1 and re- ATTENTION move the fork partition 2. Motorcycle tips to the side when raising Component damage cause by tipping over…
• Page 129
  After transportation, position the fork partition 2 and install the screws 1.

• Page 131: On The Racetrack

  On the racetrack Displays for racing mode … 130 LAPTIMER ……133 Vehicle settings for racing mode .

• Page 132: Displays For Racing Mode

  Displays for racing mode Sport 1 display with riding modes Pro Adapt DTC ( 139). Maximum DTC torque re- duction Current DTC torque reduc- tion Tachometer Maximum braking deceler- ation Current braking decelera- tion Maximum angle of inclina- tion Current angle of inclination Unit for displaying rpm: 1000 RPM…

• Page 133
  Sport 2 display with riding modes Pro Adapt DTC ( 139). Maximum DTC torque re- duction Current DTC torque reduc- tion Tachometer Difference between the last lap time and the ref- erence time, or difference between the current lap time and the reference time Reference time: The fastest lap from the laps…
• Page 134
  Sport 3 display with riding modes Pro Adapt DTC ( 139). Maximum DTC torque re- duction Current DTC torque reduc- tion Tachometer Current angle of inclination Maximum angle of inclina- tion Reference time: The fastest lap from the laps currently saved, or the fastest lap ever saved 133) Current lap time…

• Page 135: Laptimer

  LAPTIMER The time for the current lap Laps can be used to go to the restarts at 00:00:00. current lap times and riding Start time recording data. 99 laps can be saved. The stopped time of a racing Go to menu Sport and switch If you do not delete any laps lap is displayed for a config- to the Sport 2 or Sport 3…

• Page 136: Vehicle Settings For Racing

  a new race can be recorded at is displayed before the current functions Media, Telephone, lap time is shown. other times and compared with and Navigation. the best lap from previous races. Reference: Selection of Configuration menu The best ever racing lap can be which best time is shown as deleted in the LAPTIMER menu.

• Page 137: Mode

  The following parameters can be RACE PRO 1, RACE PRO 2, and Light warnings: If the turn set: RACE PRO 3 riding modes. signals are removed or the license-plate carrier is detached Engine If RACE PRO riding mode is for racetrack use, the vehicle Engine Brake deactivated, all predefined rid- electronics will interpret this…

• Page 138: Launch Control

  If a setting is also saved in a When the Launch Control is ac- standard riding mode, this rid- tive, the engine torque is reduced ing mode is specified. so that, for example, the maxi- mum propulsion on level ground Change a setting as desired.

• Page 139
  Perform start as usual, open The number of subsequent starts throttle grip at least to such with Launch Control is limited for an extent that speed limiting is clutch protection. The number reached. of starts still possible is shown Open throttle grip completely in the display, e.g.

• Page 140: Pit Lane Limiter

  Using the Pit Lane Limiter The throttle grip reacts again NOTICE as usual. Depending on the race track, The speed resulting from the upshift and drive around curves maximum RPM depends on the in the inclined position. gear ratio and the tire size. If third gear is engaged or the Reading display range angle of inclination is greater…

• Page 141: Dtc

  with riding modes Pro Select the desired RACE PRO WARNING riding mode. The control can be adjusted in detail as part of the configuration When the starter button is NOTICE of the RACE PRO riding modes. released, the engine accel- Configuring the RACE PRO rid- erates according to the posi- DTC can also be adjusting while…

• Page 142: Chassis Settings For Racing

  ( 101). button 1 down to reduce the turns sufficiently. In this case, DTC control. BMW Motorrad recommends with Dynamic Damping Control The set value is shown on the switching off the DTC temporar- (DDC) display and lies between -7 ily.

• Page 143: Removing And Installing Mirror

  with Race package Adjusting the rebound-stage damping on the front wheel with M package 104). Adjust the ride height ( 107). Adjusting the rebound-stage Adjust the swinging arm damping on the rear wheel 108). 105). Removing and installing Adjusting the compression mirror damping on the rear wheel Remove the screws 1 and 2.

• Page 144
  NOTICE If the mirrors with integrated turn Use the M Cover Kit from signals are removed for racetrack BMW Motorrad to cover the use, the vehicle electronics will exposed screw sockets and re- interpret this as a defective light secure the components.
• Page 145
  Installing mirrors Park motorcycle on a level, firm surface. Remove trim panel attachment. Position the air inlet flap 1 and Unclip the air inlet flap at the clip in at the top 2. top in the arrow direction and remove it in a downward motion.

• Page 146: Removing And Installing License

  Insert the mirrors on the left and right into the mounts 1. Connect the connector for the Position the windshield in right-hand turn signal 1 and the the arrow direction. left-hand turn signal 2. Install screws 1 and 2. Install the nuts 1 and 2 on the Removing and installing rear side of the trim panel with the appropriate torque.

• Page 147
  Do not ride on public roads Disconnect the connector for without a number plate the license plate light 2 and carrier. left-hand turn signal 3. Park motorcycle on a level, firm NOTICE surface. If the license plate carrier is re- with passenger package moved for racetrack use, the Remove passenger seat…
• Page 148
  NOTICE Use the M Cover Kit from BMW Motorrad to cover the resulting opening. Disconnect the connector for Remove screws 1. the right-hand turn signal 1. Carefully clip in the tail cowl- ing 1 on the left and right, first vertically 2, then horizontally 3.
• Page 149
  Remove the hump cover 72). Carefully clip in the tail cowling Carefully unclip the tail cowl- in the arrow direction. ing 1 on the left and right, first horizontally 2, then vertically 3. Install screws 1 and 2. Remove the screws 1 and 2. Carefully unclip the tail cowling with passenger package on the left and right in the ar-…
• Page 150
  Hook in the license-plate car- rier 1. Feed in the cable for the right- Connect the connector for the hand turn signal 1, left-hand license plate light 2 and left- turn signal 2, and license plate hand turn signal 3. Install screws 1.

• Page 151: Switching Off Abs When Riding On The Racetrack

  with passenger package Install passenger seat ( 73). Install the hump cover ( 72). Switching off ABS when riding on the racetrack Deactivating ABS function Requirement Carefully clip in the tail cowl- Press and hold the button 1 for ing 1 on the left and right, first at least three seconds.

• Page 152: Gearshift-Pattern Reverser

  More information about brake speed, an ABS fault has oc- systems with BMW Motorrad curred. Integral ABS can be found in the Technology in detail chap- min 6 mph (min 10 km/h)

• Page 153
  Reversing shift pattern Transfer the gearshift rod 4 The shift pattern reversal for to the thread for the inverted racing mode is set up. ATTENTION gearshift pattern 1. Riding with shift pattern re- versal on public roads Expiry of operating license for public roads Do not use shift pattern rever- sal on public roads.

• Page 155: Technology In De

  Technology in detail General notes ….. . 154 Antilock Braking System (ABS) ..154 Dynamic Damping Control (DDC) .

• Page 156: General Notes

  If the maximum transferable brak- to the road is restored. At this ing force is exceeded when the point, the BMW Motorrad Integral ATTENTION rider increases the brake pres- ABS must assume extremely low Attempt at a burn-out de-…

• Page 157
  In what ways is the will block very late, even if the The ABS ensures driving sta- BMW Motorrad Race ABS brakes are applied forcefully. bility on any surface within the noticeable to the rider? Consequently, ABS does not limits of driving physics.
• Page 158
  How important is regular Apart from problems on the WARNING BMW Motorrad Race ABS, maintenance? unusual riding conditions can Braking in curves also cause a fault message to be WARNING Risk of accident despite ABS generated. The rider is always responsi-…

• Page 159: Dynamic Damping Control

  ABS control Advantages for the rider the EDC valves. As a result, the chassis and suspension is ad- From a technical standpoint, The advantages of ABS Pro for justed to the conditions of the ABS Pro adjusts the ABS control the rider are sensitive response surface.

• Page 160: Dynamic Traction Control

  ment system adapts the engine Special situations If an additional leveling sensor torque when the slip limit is ex- is installed, an existing sensor As lean angles increase, accel- ceeded. is replaced, or the running gear eration potential is also progres- DTC can only provide support height is changed, a calibration sively restricted by the laws of…

• Page 161: Riding Mode

  This case cannot In the RACE riding mode: op- be controlled by BMW Motorrad For each riding mode, a coor- timum throttle response, maxi- DTC. dinated setting is available for…

• Page 162
  ation may be slightly reduced Wheelie is possible, optimum with riding modes Pro on dry roads. propulsion. In the RACE PRO riding In the DYNAMIC riding mode: modes, additionally: soft throttle with riding modes Pro high performance on dry roads. response, maximum torque, In the RACE PRO riding modes In poor road conditions, opti-…

• Page 163: Dynamic Brake Control

  Changing setting riding mode has been switched with riding modes Pro over. In the RACE PRO riding Riding modes can be changed modes: the use of the ABS when the vehicle is at a standstill Dynamic Brake Control can be individually adjusted. with the ignition switched on.

• Page 164: Tire Pressure Control

  Tire pressure control Behavior during emergency shutting off the gas. This en- braking sures activation of emergency (TPC/RDC) braking. If emergency braking is with tire pressure monitor If the gas is shut off (throttle applied at a speed of more (TPM) position <5%) during than 10 km/h, in addition…

• Page 165
  continue to transmit the mea- Temperature do not match the values shown sured readings for some time in the TFT display. compensation after the vehicle comes to a stop. The tire inflation pressure is tem- Tire pressure adjustment perature dependent, i.e. it in- Transmission time of the Compare the RDC value in the creases or decreases together…

• Page 166: Shift Assistant

  sition until the gear change is Benefits Example completed. A further increase 70-80 % of all gear changes of the force applied to the gear can be performed without us- lever during the gear-shift op- ing the clutch. 2.9 psi (0.2 bar) eration is not necessary.

• Page 167: Hill Start Control

  gear to be engaged. Over- partial integral ABS brake system, quired to drive off, making ad- revving is thus prevented. without the rider having to con- ditional turning of the throttle tinuously operate the brake lever. grip necessary. When Hill Start Control is acti- Maximum engine speed Behavior when the vehicle is vated, pressure builds in the rear…

• Page 168
  made aware about the deactiva- tion of the Hill Start Control by the following behavior: Brake warning jerk The brake is released briefly and is immediately reactivated. This causes a jerking behavior that the rider can feel. The partial integral ABS brake system sets a speed of approx.

• Page 169: Maintenance

  Maintenance General notes ….. . 168 Fuses ……196 On-board tool kit .

• Page 170: General Notes

  Control (DDC) your motorcycle on DVD, which with Race package Adjusting the compres- you can obtain from your autho- sion damping on the rized BMW Motorrad retailer. with M package front wheel ( 104). Adjusting the ride height without Dynamic Damp-…

• Page 171: Front Wheel Stand

  ( 106). ATTENTION without Dynamic Damp- ing Control (DDC) Use of the BMW Motorrad Adjusting the compres- front wheel stand without an sion damping on rear additional center or auxiliary wheel ( 105).

• Page 172: Rear-Wheel Stand

  Rear-wheel stand Mounting the rear-wheel stand Turn the bracket 2 with the Attach the auxiliary stand to the long sides facing the inside. front suspension and press it on the ground evenly. Adjust the mounting pieces 3 to the width of the service Use the basic stand with the adapters inserted into the front tool number (83 30 0 402 241)

• Page 173: Engine Oil

  Install the service adapter (83 Turn the bracket 2 with the Attach the rear wheel stand to 30 2 152 841) 1 into the rear long sides facing the outside. the rear wheel swing arm and wheel swinging arm at the left press it on the ground evenly.

• Page 174
  BMW Motorrad ADVANTEC Ultimate oil. NOTICE Approx. 1.2 gal (Approx. 4.5 l) BMW Motorrad recommends oc- (with filter replacement) casionally checking the motor oil If oil level is below minimum after a journey of at least 50 km…

• Page 175: Brake System

  Top up the engine oil to the Have the brakes checked by a specified level. specialist workshop, preferably Park motorcycle on a level, firm an authorized BMW Motorrad Checking the engine oil level surface. dealer. 171). Wipe the area around the oil Install cap of oil filler opening 1.

• Page 176
  Have brake pads replaced at an authorized service facil- ity, preferably an authorized BMW Motorrad retailer. Checking the rear brake pad thickness Park motorcycle on a level, firm Front brake-pad wear Rear brake-pad wear surface.
• Page 177
  The brake fluid level in the brake- The brake fluid level must BMW Motorrad retailer. fluid reservoir drops due to brake not fall below the MIN mark. pad wear. (Brake fluid reservoir horizon-…
• Page 178
  NOTICE cialist workshop, preferably The brake fluid level must The brake fluid level in the brake- an authorized BMW Motorrad not fall below the MIN mark. fluid reservoir drops due to brake dealer. (Brake fluid reservoir horizon- pad wear.

• Page 179: Clutch

  WARNING increasing operation: Have the clutch checked by an Insufficient brake fluid in the authorized workshop, preferably brake-fluid reservoir an authorized BMW Motorrad Considerably reduced braking retailer. performance caused by air in the brake system Check clutch lever play Adjust the riding mode imme- Requirement diately until the fault is rectified.

• Page 180: Coolant

  If the correct clutch play play can only be set through further unscrewing, contact a specialist workshop, preferably a BMW Motorrad retailer. Read the coolant level on the expansion tank 1. Direction Check clutch lever play of view: from front looking at 177).

• Page 181: Tires

  Tires Topping up coolant Checking the tire pressure WARNING Incorrect tire inflation pres- sure Poorer handling characteristic of motorcycle, reduction of tire service life Required coolant level Ensure proper tire inflation Open the expansion tank pressure. cap 1. Between MIN and MAX Top up coolant to the specified WARNING marks on the expansion tank…

• Page 182: Wheel Rims And Tires

  If the tire tread has worn tires) ity, preferably an authorized down to the level of the marks, BMW Motorrad retailer. Tire pressure, rear the tire is completely worn. The locations of the marks are indi- Check tire tread depth cated on the edge of the tire, e.g.

• Page 183: Wheels

  RDC sensor is not The wheel sizes play an impor- damaged. Inform the authorized tant role with DTC. The diameter BMW Motorrad retailer or the and width of the wheels stored specialist workshop about the in the control unit have particular RDC sensor.

• Page 184
  ABS malfunction when pressing the brake pads cle, preferably using a The left clamp fixes the apart BMW Motorrad front-wheel threaded bushing in position Do not actuate the brakes with stand, continuing until the the brake caliper removed. wheel rotates freely.
• Page 185
  Installing the front wheel Lift the front wheel and install cialized workshop, preferably the quick-release axle 1 with an authorized BMW Motorrad WARNING retailer. the specified torque. Use of a wheel which does Quick-release axle in…
• Page 186
  Position the brake caliper 2 on Fasten the cable for the wheel Clamping screw in axle the left and position the cable speed sensor in the holder 1. adapter routing 3. Insert the wheel speed sensor Install the screws 1 with the into the bore and fasten with Tightening sequence: Tighten appropriate torque.
• Page 187
  Brake pistons are pressed Remove front wheel stand and back. auxiliary stand. Removing rear wheel Raise motorcycle, preferably with a BMW Motorrad rear- Remove the quick-release wheel stand. axle 2 and take out the adjust- Mounting the rear-wheel stand ment plate 1.
• Page 188
  1 to the front and set it to a BMW authorized workshop, the chain 1 from the sprocket the side. preferably by a BMW Motorrad wheel. Roll rear wheel toward rear out retailer. of swinging arm.
• Page 189
  NOTICE Ensure that the brake line and ABS sensor cable are correctly positioned. The brake line and the ABS sensor cable must be located in their guides in order to prevent contact with the rear wheel or exhaust system. Roll the rear wheel on the sup- Insert the right-hand adjust- port into the swinging arm.

• Page 190: Light Sources

  For de- panel tails please contact a special- ist service facility, preferably NOTICE an authorized BMW Motorrad Retailer. The working steps described here for the right fairing side All light sources on the vehicle panel also apply logically for the are LED light sources.

• Page 191
  Install fairing side panel Bend the engine spoiler 2 Install screws 1. down slightly and remove the Install screws 2. Insert the fairing side panel 1 screw 1. into the nozzles 2. Removing the hump trim panel with passenger package Remove passenger seat 72).
• Page 192
  seat surface and expose the lug 2. Remove screw 3. Lift the rider’s seat 1 at the rear and unhook the fixing mechanism 4. Lay the rider’s seat on a clean surface with the upholstered side down. Remove the screws 1 and 2. Carefully unclip the tail cowl- ing 1 on the left and right, first Carefully unclip the tail cowling…
• Page 193
  Installing the hump trim panel Lift the hump trim panel 1 Carefully clip in the panels 4 in in the arrow direction and the arrow direction into the remove it from the retaining hump trim panel 2. Position the hump trim panel 1 tab 2.

• Page 194: Jump-Starting

  with passenger package Install passenger seat ( 73). Install the hump cover ( 72). Jump-starting CAUTION Touching live parts of the ig- Insert and position the rider’s Carefully clip in the tail cowl- nition system when the en- seat 1 at the front in the fixing ing 1 on the left and right, first gine is running mechanism 4.

• Page 195: Battery

  Allow engine on support mo- Disconnect jumper cable from ATTENTION torcycle to run while jump- negative terminals first, then starting. disconnect second cable from Contact between crocodile positive terminals. Begin by clamping one end of clips of jump leads and mo- the red jumper cable to the Installing rider’s seat ( 74).

• Page 196
  4. DWA. trickle-charger to the battery. with M battery NOTICE BMW Motorrad has developed a trickle-charger specially designed for compatibility with the elec- tronics of your motorcycle. Using this charger, you can keep the battery charged during long pe-…
• Page 197
  Follow the disconnection Follow the installation Position the wiring harness sequence. sequence. positive terminal 1 and install the screw 2. Remove the screw 1 and take Position the wiring harness Position the wiring harness off the wiring harness negative positive terminal 1 and install negative terminal 3 and install terminal 2 and press to the the screw 2.

• Page 198: Fuses

  Install battery NOTICE ATTENTION NOTICE In the case of longer periods Bypassing defective fuses when the motorcycle is not be- Risk of short circuit and fire If the vehicle has been discon- ing used, the battery must be Do not bypass defective fuses. nected from the battery for a recharged regularly.

• Page 199: Data Link Connector

  On- shop, preferably an authorized Board Diagnostics. BMW Motorrad retailer. Motorcycle experiences malfunc- 15 A Install the fuse holder 1 in the tions Instrument cluster holder.

• Page 200: Chain

  2 from the holder 3. BMW Motorrad recommends Install passenger seat ( 73). The interface for the diagnos- using BMW Motorrad chain Install the hump cover ( 72). tics and information system lubricant or: can be connected to the data…

• Page 201
  Checking chain sag Make sure that the same scale If the measured value is outside value 4 is set on the left and the approved tolerance: Park motorcycle on a level, firm right. Adjusting chain sag ( 199). surface. Tighten the lock nuts 3 on the Turn the rear wheel until the Adjusting chain sag left and right to the specified…
• Page 202
  Permissible chain length max 5.7 in (max 144 mm) (measured over the center of 10 rivets, chain under ten- sion) If the chain has reached the max- imum approved length: Contact an authorized service facility, preferably an authorized BMW Motorrad retailer.

• Page 203: Accessories

  Accessories General notes ….. . 202 Connector for optional acces- sories ……202 M Cover Kit .

• Page 204: General Notes

  BMW. Therefore, Use of products from other BMW assumes responsibility for The vehicle is equipped with the manufacturers these products. BMW will not be following connectors for special Safety risk held liable for unapproved parts and racing accessories:…

• Page 205
  Under left-hand fairing side panel Connector for DWA and Terminating resistor M data logger Connector for DWA and Anti-theft alarm system M data logger Plug for special and racing accessories: Under the hump cover Power supply and LIN without anti-theft alarm system Spring travel sensor for (DWA) front forks (racing acces-…

• Page 206: Connector For Optional Ac

  Under the hump cover Remove the hump cover ATTENTION 72). Removing the hump trim panel Penetration of dirt and mois- 189). ture in the open connector Unlock protective cap or ter- Malfunctions minating resistor and pull off Remount cover cap or termi- connector.

• Page 207: M Cover Kit

  M Cover Kit Installing the license-plate car- rier ( 147). Covering openings in the Installing mirrors ( 143). body Installing the M Cover Kit Requirement The M Cover Kit is used to pro- fessionally attach the front-fairing panel and to cover the openings in the body if the mirrors and license-plate carrier have been Hook in and position the cover…

• Page 208
  Removing the M Cover Kit Remove screws 2. Remove the cover for the mir- Remove screws 1. ror mount 1. Unhook the cover for the license-plate carrier 1 and remove it in a downward motion.

• Page 209: Care

  Care Care products ….. 208 Washing your motorcycle ..208 Cleaning sensitive motorcycle parts .

• Page 210: Care Products

  BMW Motorrad recommends hazard care products available at your that you use BMW Insect Re- Brake early until the brake ro- authorized BMW Motorrad mover to soften and wash off tors and brake pads are dry.

• Page 211: Cleaning Sensitive Motorcy

  Do not use abrasive cleaners or Rubber Do not use chemical cleaners containing alcohol or cleansers. Treat rubber components with solvents. water or BMW rubber protection Do not use insect sponges or coating agent. Chrome sponges with a hard surface. Carefully clean chrome parts ATTENTION…

• Page 212: Paint Care

  Washing the motorcycle regu- mends removing tar stains with stand pivots with a suitable lu- larly will help counteract the long- BMW tar remover. Then add bricant. term effects of substances that a protective wax coating to the damage the paint, especially if Preserve bare metal and paint at these locations.

• Page 213: Technical Data

  Technical data Troubleshooting chart … . . 212 Performance data ….231 Threaded fasteners ….215 Fuel.

• Page 214: Troubleshooting Chart

  Troubleshooting chart Engine does not start at all or is very difficult to start. Possible cause Remedy Side stand extended and gear engaged Fold in side stand. Gear engaged and clutch not operated Place transmission in neutral or disengage clutch. No fuel in tank Refueling ( 124).

• Page 215
  Bluetooth connection is not established. Possible cause Remedy Necessary pairing steps were not performed. Refer to the operating instructions of the commu- nication system for the necessary steps for pair- ing. Connectivity functions are deactivated because Go to menu Settings and deactivate Race- the racetrack functions are activated.
• Page 216
  Active route guidance is not displayed in the TFT display. Possible cause Remedy Navigation from the BMW Motorrad Con- Call up the BMW Motorrad Connected App on nected App was not transferred. the connected mobile end device before riding. Route guidance cannot be started.

• Page 217: Threaded Fasteners

  Threaded fasteners Front wheel Value Valid Quick-release axle in threaded bush M24 x 1.5 37 lb/ft (50 Nm) Clamping screw in axle adapter M8 x 35 Tightening sequence: Tighten the screws 6 times, alternating between one and the other each time 14 lb/ft (19 Nm) Radial brake caliper in axle mount…

• Page 218
  Rear wheel Value Valid Nut for swinging arm pivot point connector on frame M36 x 0.75, Replace nut 37 lb/ft (50 Nm) Loctite 270, high-strength Nut on swing axle M18 x 1.5, Replace nut 74 lb/ft (100 Nm) mechanical Rear-wheel quick-release axle in swinging arm M24 x 1.5 74 lb/ft (100 Nm)
• Page 219
  Rear wheel Value Valid Spring strut on the relay lever M12 x 75 — 10.9 74 lb/ft (100 Nm) micro-encapsulated Mirrors Value Valid Mirror on front panel carrier M6, Replace nut 6 lb/ft (8 Nm) mechanical License-plate carrier on rear Value Valid frame…

• Page 220: Fuel

  Fuel Recommended fuel quality Premium grade unleaded fuel (max. 5 % ethanol, 91 AKI (98 ROZ/RON) 93 AKI Alternative fuel quality Super unleaded (restrictions with regard to power and fuel consumption) (max. 10 % ethanol, E10) 89 AKI (95 ROZ/RON) 90 AKI Usable fuel quantity Approx.

• Page 221: Engine Oil

  SAE 5W-40, API SJ/JASO MA2, Additives (for in- stance, molybdenum-based substances) are pro- hibited, because they would attack the coatings on engine components, BMW Motorrad recom- mends BMW Motorrad ADVANTEC Ultimate oil. Engine oil, quantity for topping up max 1.4 quarts (max 1.3 l), Difference between…

• Page 222: Engine

  Engine Engine number location Lower part of crankcase, right Engine type A10A10A Engine design 4-cylinder, 4-stroke, in-line Displacement 999 cc (999 cm Cylinder bore 3.1 in (80 mm) Piston stroke 2 in (49.7 mm) Compression ratio 13.,3:1 Rated output 207 hp (152 kW), at engine speed: 13500 min Torque 83 lb/ft (113 Nm), at engine speed: 11000 min Maximum engine speed…

• Page 223: Clutch

  Clutch Clutch design Multiple-disc oil bath (anti-hopping) with self-rein- forcement Transmission Transmission design Claw-shifted 6-speed transmission integrated in engine housing Transmission gear ratios 1.652 (76:46 teeth), Primary gear ratio 2.647 (45:17 teeth), 1st gear 2.091 (46:22 teeth), 2nd gear 1.727 (38:22 teeth), 3rd gear 1.500 (33:22 teeth), 4th gear 1.360 (34:25 teeth), 5th gear 1.261 (29:23 teeth), 6th gear…

• Page 224: Rear-Wheel Drive

  Rear-wheel drive Type of final drive Chain drive Number of teeth of rear-wheel drive (Pinion/ 17:45 sprocket) Secondary gear ratio 2.,647 Frame Frame design Aluminum composite bridge frame, integrated en- gine Location of type plate Frame at front right on steering head Location of the vehicle identification number Frame at front right on steering head…

• Page 225: Suspension

  Suspension Front wheel Type of front suspension Upside-down telescopic forks Spring travel, front 4.7 in (120 mm), on front wheel with Dynamic Damping Control (DDC) 4.7 in (120 mm), on front wheel Rear wheel Type of rear suspension Aluminum bearer swinging arm Type of final drive Chain drive Spring travel, rear…

• Page 226: Brakes

  Brakes Front wheel Type of front brake Two-rotor disk brake, diameter 320 mm, 4-piston fixed caliper with M carbon wheels Two-rotor disk brake, diameter 320 mm, 4-piston fixed caliper with M forged wheels Two-rotor disk brake, diameter 320 mm, 4-piston fixed caliper Front brake pad material Sintered metal…

• Page 227: Wheels And Tires

  Wheels and tires Recommended tire combinations An overview of the current tire approvals is avail- able from your authorized BMW Motorrad retailer or on the Internet at bmw-motorrad.com. Speed category of front/rear tires W, minimum requirement: 168 mph (270 km/h)

• Page 228
  Front tire designation 120/70 ZR 17 Load index for front tire min 58 g/cm Permissible front-wheel imbalance max 0.2 oz (max 5 g) Balance weight for front wheel (Half of each max 2.8 oz (max 80 g) weights must be attached on the right and left of the rim respectively) Rear wheel Rear wheel design…

• Page 229: Electrical System

  Tire inflation pressure Tire pressure, front 36.3 psi (2.5 bar), One-up, with cold tires 36.3 psi (2.5 bar), Two-up mode with load, with cold tires Tire pressure, rear 42.1 psi (2.9 bar), One-up, with cold tires 42.1 psi (2.9 bar), Two-up mode with load, with cold tires Electrical system Fuses…

• Page 230
  Battery Battery design AGM battery (Absorbent Glass Mat) with M battery Lithium ion battery Battery voltage 12 V with M battery 12 V Battery capacity 8 Ah with M battery 5 Ah Spark plugs Spark plugs, manufacturer and designation NGK LMAR9FI-10G Light sources Bulb for high-beam headlight Bulbs for low-beam headlight…

• Page 231: Dimensions

  Dimensions Motorcycle length 81.6 in (2073 mm), over rear wheel Motorcycle height 45.3 in (1151 mm), across mirrors at DIN unladen weight 45.5 in (1155 mm), Without mirror and with DIN unladen weight Motorcycle width 33.4 in (848 mm), with mirrors 29.1 in (740 mm), without mounted parts Rider’s seat height 32.4 in (824 mm), without driver at DIN unladen…

• Page 232: Weights

  Weights Vehicle curb weight 434 lbs (197 kg), DIN unladen weight, ready for road, 90 % full tank of gas, without OE with M package 427 lbs (193.7 kg) with Race package 431 lbs (195.3 kg) with passenger package 436 lbs (197.8 kg) with M carbon wheels 431 lbs (195.3 kg) with M battery…

• Page 233: Performance Data

  Performance data Top speed >124 mph (>200 km/h)

• Page 235: Service

  Maintenance procedures ..236 BMW Service ….. . 236 Maintenance schedule … . . 239 Maintenance confirmations .

• Page 236: Defects

  NHTSA may order the manufac- turer to perform a recall and remedy campaign. However, the NHTSA cannot become involved in individual problems between you, your authorized BMW Motorrad retailer, or BMW of North America, LLC.

• Page 237: Bmw Motorrad Service

  BMW Motorrad retailer. network, BMW Motorrad Entries can attend to you and your To ensure that your BMW con- Maintenance work that has been motorcycle in over 100 countries sistently remains in optimal con- performed is recorded in the di- around the globe.

• Page 238: Bmw Motorrad Mobility

  BMW motorcycle with extra se- More information on the topic of curity by offering a wide array of service is available at: BMW Service is carried out once assistance services in the event bmw-motorrad.com/service a year. The scope of the ser-…

• Page 241: Maintenance Schedule

  Maintenance schedule BMW Running-in check (including oil change) BMW standard scope of service Engine oil change with fil- Check valve clearance Check timing Replace all spark plugs Replace air filter insert Oil change in the tele- scopic forks Change brake fluid in en-…

• Page 242: Maintenance Confirmations

  Maintenance confirmations BMW Service standard scope The repair procedures belonging to the BMW Service standard package are listed below. The actual maintenance work applicable for your vehicle may differ. Performing the vehicle test using the BMW Motorrad diagnosis system Visual inspection of the brake lines, brake hoses, and connections…

• Page 243
  BMW pre-delivery BMW Running-in check Check performed performed at km Next service latest or, if reached earlier at km Stamp, signature Stamp, signature…
• Page 244
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 245
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 246
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 247
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 248
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 249
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 250
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 251
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 252
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 253
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 254
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…
• Page 255
  BMW Service Work performed performed BMW Service Engine oil change with filter at km Checking valve clearance Checking valve timing (cylinder head Next service cover removed) latest Replacing all spark plugs Replacing air cleaner element or, if reached earlier Oil change — telescopic fork…

• Page 256: Service Confirmations

  Service confirmations The table serves to provide evidence of maintenance and repair work, as well as installed optional acces- sories and special campaigns performed. Work performed at km Date…

• Page 257
  Work performed at km Date…

• Page 259: Appendix

  Appendix Certificate for Electronic Immobi- lizer ……. . 258 Certificate for Tire Pressure Con- trol .

• Page 260: Immobilizer

  FCC Approval This device complies with Any changes or modifi- Part 15 of the FCC rules. cations not expressly Ring aerial in the Operation is subject to the approved by the party ignition switch following two conditions: responsible for compliance (1) This device may not could void the user’s cause harmful inter-…

• Page 261
  Approbation de informations avec la clé de Toute modification contact via l’antenne qui n’aurait pas été la FCC annulaire. approuvée expressément Antenne annulaire Le présent dispositif est par l’organisme responsa- conforme à la partie 15 ble de l’homologation peut présente dans le des règles de la FCC.

• Page 262: Control

  Certification Tire Pressure Control (TPC) FCC ID: MRXBC54MA4 FCC ID: MRXBC5A4 IC: 2546A-BC54MA4 IC: 2546A-BC5A4 This device complies with Part 15 of the FCC Le présent appareil est conforme aux CNR Rules and with Industry Canada license-exempt d’Industrie Canada applicables aux appareils RSS standard(s).

• Page 263: Ment Cluster

  Declaration of Conformity Turkey Robert Bosch Car Multimedia GmbH, ICC6.5in tipi telsiz sisteminin 2014/53/EU Radio equipment TFT instrument cluster nolu yönetmeliğe uygun olduğunu beyan eder. AB Uygunluk Beyanı’nın tam metni, aşağıdaki For all Countries without EU internet adresinden görülebilir: http://cert.bosch- carmultimedia.net Technical information BT operating frq.

• Page 264
  Canada Mexico This device complies with Industry Canada’s La operación de este equipo está sujeta a las licence-exempt RSSs and part 15 of the FCC siguientes dos condiciones: Rules. Operation is subject to the following two (1) es posible que este equipo o dispositivo no conditions: cause interferencia perjudicial y (1) this device may not cause interference, and…
• Page 265
  Thailand Le présent appareil est conforme aux CNR เครื ่ อ งโทรคมนาคมและอุ ป กรณ์ น ี ้ d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée มี ค วามสอดคล้ อ งตามข้ อ กํ า หนดของ กทช. aux deux conditions suivantes : (1) l’appareil ne (This telecommunication equipments is in doit pas produire de brouillage, et (2) l’appareil compliance with NTC requirements)

• Page 266: Index

  Installing, 196 Dynamic Brake Control Abbreviations and symbols, 6 depends on riding mode, 122 Maintenance instructions, 193 Safety information, 121 Position on motorcycle, 18 Displays, 46 Technical Data, 224 Removing, 196 Self-diagnosis, 117, 118 Breaking in, 119 Technical data, 228 Technology in detail, 154 Bulbs Best ever lap, 134…

• Page 267
  Clock Diagnostic connector Engine Adjusting, 85 Fasten, 198 Indicator light for engine Clutch control, 41 Position on motorcycle, 18 Adjusting clutch lever, 99 Parking, 57 Release, 197 Adjusting play, 178 Starting, 116 Dimensions Checking operation, 177 Technical Data, 229 Technical Data, 220 Checking play, 177 DTC, 19 Warning light for electronic…
• Page 268
  Fall sensor Hump trim panel Hazard warning flashers Indicator light, 46 Installing, 191 Control, 19, 20 Frame Removing, 189 Technical Data, 222 Operating, 59 Front wheel stand Headlight Mounting, 169 Ignition Adjustment for right-hand/left- Fuel Switching off, 57 hand traffic, 98 Fuel specifications, 123 Switching on, 56 Headlight range, 98…
• Page 269
  Laptimer Maintenance Navigation Maintenance schedule, 239 Adjusting, 133 Operating, 92 Maintenance confirmations, 240 End time entry, 133 Notice concerning current Maintenance intervals, 236 status, 7 Operating, 133 Media Start time recording, 133 Operating, 94 Launchcontrol, 135, 136 Onboard computer, 71 Menu Start of race, 137 Calling up, 80…
• Page 270
  TFT display, 25, 27 Racetrack, 134 Riding mode Chassis and suspension Adjusting, 62 Underneath seat, 18 adjustment settings, 140 Control, 20 Displays for racing mode, 129 Technology in detail, 159 Pairing, 86 Pit-lane limiter, 138 Road sign detection Parking light, 59 Race start with Launch switch on or off, 83 Phone…
• Page 271
  Shifting gears TFT display, 21 Tachometer, 21 Shiftpoint light, 121 Control, 19 Tachometer, 83 Upshift recommendation, 84 Operating, 80, 81 Technical data Overview, 25, 27 Spark plugs, 228 Battery, 228 Selecting display readings, 77 Speedometer, 21 Brakes, 224 Spring preload Tire Pressure Control TPC/RDC Clutch, 221 Display, 42…
• Page 272
  Type plate Light source defect, 39 Position on motorcycle, 17 My vehicle, 89 Overview, 24 TPM Tire Pressure Monitor, 43 Values Vehicle voltage, 38 Display, 28 Weights Vehicle identification number Load capacity table, 15 Position on motorcycle, 17 Technical Data, 230 Vehicle voltage Wheels Warning indicator, 38…
• Page 274
  80788 Munich, Germany quently when servicing your Reprints and duplication of this vehicle. work, in whole or part, are pro- For more information visit: hibited without the express writ- www.P65Warnings.ca.gov/ ten approval of BMW Motorrad, passenger-vehicle Aftersales.
• Page 275
  42.1 psi (2.9 bar), One-up, with cold tires 42.1 psi (2.9 bar), Two-up mode with load, with cold tires You can find further information on all aspects of your vehicle at: bmw­motorrad.com BMW recommends *01409899567* Order No.: 01 40 9 899 567 09.2018, 1st edition, 07…

1. Manuals
2. Brands
3. BMW Manuals
4. Motorcycle
5. S 1000 RR —
6. Rider’s manual

• Page 1
  BMW Motorrad The Ultimate Riding Machine Rider’s Manual (US Model) S 1000 RR…
• Page 2
  Motorcycle/Retailer Data Motorcycle Data Retailer Data Model Contact in Service Ms./Mr. Vehicle identification number Phone number Color number Initial registration Retailer’s address/phone number (com- License plate pany stamp)
• Page 3
  About this Rider’s Manual BMW Motorrad. Please read this Rider’s Manual carefully before starting to use your new BMW. It contains im- portant information on how to operate the controls and how to get the most benefit from your BMW’s advanced technical fea- tures.

• Page 4: Table Of Contents

  Table of Contents 3 Displays ….21 Cruise control ….57 Warning and indicator Speed warning .

• Page 5
  Refueling ….90 Battery ….185 8 Technology in de- Secure motorcycle for trans- tail .
• Page 6
  Reporting safety defects ….216 BMW Motorrad Service . . . 217 BMW Motorrad Mobility Services ….217 Maintenance proce- dures .

• Page 7: General Instructions

  General instructions Overview ……6 Abbreviations and symbols ..6 Equipment .

• Page 8: Overview

  When the time comes to sell claims may be denied as a result. your BMW, please remember NOTICE Special informa- Anti-Lock Brake System. to hand over this Rider’s Manual; tion on operating and in-…

• Page 9: Equipment

  Optional accessory. may vary from the descriptions in If your BMW is equipped with BMW Motorrad op- this Rider’s Manual. In addition, options or accessories not de- tional accessories can…

• Page 11: Overviews

  Overviews General view, left side ….11 General view, left side with DDC ..13 General view, right side … . . 15 Multifunction switch, left .

• Page 13: General View, Left Side

  General view, left side without Dynamic Damp- ing Control (DDC) Adjuster for spring preload, front ( Adjusting front compres- sion damping (red scale) without Dynamic Damp- ing Control (DDC) Adjusting rear compres- sion damping (red scale) Adjuster for spring preload, rear ( Seat lock ( Tire inflation pressure table…

• Page 15: General View, Left Side With Ddc

  General view, left side with DDC with Dynamic Damping Control (DDC) Adjust spring preload on front wheel ( Seat lock ( Tire inflation pressure table Load capacity table Chain adjustment values Adjuster for spring preload, rear ( Engine oil level indicator 159) Connector for optional ac- cessories (…

• Page 17: General View, Right Side

  General view, right side without Dynamic Damp- ing Control (DDC) Brake-fluid reservoir, rear Adjusting rear rebound- 164) stage damping (yellow Vehicle identification num- scale) ( ber and type plate (on steering head at right) Brake-fluid reservoir, front 163) Adjusting rebound-stage damping without Dynamic Damp- ing Control (DDC)

• Page 18: Multifunction Switch, Left

  Multifunction switch, left Deactivating ABS ( ASC ausschalten ( with Dynamic Traction Control (DTC) Deactivating DTC ( High-beam headlight and headlight flasher ( Start time recording 100) with cruise control Cruise control ( Hazard warning flashers with Dynamic Traction Control (DTC) Adjusting DTC ( 127) Turn indicator (…

• Page 19
  Setting clock ( Resetting tripmeter Selecting displays ( Individualizing lap timer 100) Selecting submenu 113)

• Page 20: Right

  Multifunction switch, right with heated handlebar grips Heated grip ( Selecting riding mode Emergency on/off switch (kill switch) ( Starter button Starting engine ( with Pro riding modes Launch Control ( 128) Speed limiter for pit lane 130)

• Page 21: Underneath Seat

  Underneath seat Battery ( 185) with anti-theft alarm sys- tem (DWA) Different position of battery terminals: shifted forward Helmet holder ( Luggage straps ( Onboard tool kit ( 156) Fuse box ( 188) Rider’s Manual (US Model)

• Page 22: Instrument Cluster

  Instrument cluster Indicator and warning lights Tachometer Shiftpoint light ( Photosensor (for adjusting brightness of instrument lighting) with anti-theft alarm sys- tem (DWA) DWA LED ( Multifunction display…

• Page 23: Displays

  Displays Warning and indicator lights..22 Multifunction display ….23 Warning lights ….. . 24…

• Page 24: Warning And Indicator

  Warning and indicator lights ASC indicator and warning light ( with Dynamic Traction Control (DTC) DTC indicator light ( ABS indicator and warning light ( Turn indicator, left Universal warning light, appears together with warnings in multifunction display ( Turn indicator, right Fuel reserve ( Neutral indicator light High-beam headlight…

• Page 25: Multifunction Display

  Multifunction display Speedometer Coolant temperature Odometer ( Clock ( with heated handlebar grips Heated handlebar grips Gear indicator display, «N» indicates «neutral». Riding mode RAIN SPORT RACE Setting riding mode with Pro riding modes Additional riding modes SLICK USER…

• Page 26: Warning Lights

  Warning lights If several warnings are active, all NOTICE corresponding warning lights and Display warning symbol are displayed; Refer to Chapter 7 for informa- Warnings are displayed with ap- warnings appear alternately. tion regarding the display modes propriate warning lights. You will find an overview of the available for track use.

• Page 27
  Overview of warning indicators Warning and indicator Warning symbols in the Meaning lamps display panel EWS! lights up red is displayed Electronic immobilizer is active ( flashes red Coolant tempera- Coolant temperature too high ( ture display flashes lights up Engine in emergency-operation mode flashes yellow Severe fault in the engine management…
• Page 28
  Warning and indicator Warning symbols in the Meaning lamps display panel LAMPS! lights up yellow is indi- Taillight and lights for parking lights de- cated fective ( Front lights defective ( VDS! lights up yellow is shown in Motorcycle has fallen over ( the empty display VDS! lights up yellow…
• Page 29
  Warning and indicator Warning symbols in the Meaning lamps display panel flashes slowly ASC self-diagnosis not completed lights up ASC switched off ( lights up ASC error ( flashes rapidly DTC intervention ( flashes slowly DTC self-diagnosis not completed lights up DTC switched off ( lights up DTC error (…
• Page 30
  Warning and indicator Warning symbols in the Meaning lamps display panel DWALO! lights up yellow is dis- DWA battery charge level low ( played DWA! lights up yellow is displayed DWA battery drained ( SPEED! Shiftpoint light is dis- Speed warning ( played flashes or remains on continuously…
• Page 31
  In exceptional cases, the frequently be too high, have placed, preferably by an autho- engine stops and can no longer the fault rectified as quickly rized BMW Motorrad retailer. be started. as possible by an authorized Coolant temperature too workshop, preferably an autho-…
• Page 32
  WARNING Suppress the fault message source eliminated by a special- SETUP in the submenu ized service facility, preferably Overlooking the motorcy- EQUIPMENT WARN with the an authorized BMW Motorrad cle in traffic due to the light LAMP OFF parameter. Retailer.
• Page 33
  Replacing light source for left- failing. cialist service facility, preferably hand parking light ( 178). Safety risk an authorized BMW Motorrad Replacing right-hand parking Replace defective bulbs as retailer. light light source ( 179). soon as possible; it is best…

• Page 34: Abs Error

  Motorcycle has fallen over Possible cause: Contact an authorized service facility, preferably an authorized The ABS system has been deac- General warning light shows BMW Motorrad retailer. tivated by the rider. yellow. Activating ABS ( 51). ABS self-diagnosis not VDS!

• Page 35: Asc Error

  Possible cause: ASC error preferably an authorized BMW Motorrad retailer. ASC indicator and warning ASC self-diagnosis rou- light lights up. tine not completed ASC intervention Possible cause: ASC indicator and warning The ASC function is not avail- light flashes rapidly.

• Page 36
  Possible cause: Possible cause: DTC indicator light flashes rapidly. The DTC system has been deac- DTC self-diagnosis not DTC has detected instability at tivated by the rider. completed the rear wheel and responded by Switching on DTC ( 53). reducing the torque. The warn- The DTC function is not avail- DTC error ing light flashes longer than the…
• Page 37
  Possible cause: preferably an authorized NOTICE BMW Motorrad retailer. The DDC control unit has de- tected an error. This fault message is only shown DDC error Have the malfunction corrected for a short time immediately fol- with Dynamic Damping Control as soon as possible at an lowing the Pre-Ride-Check.
• Page 38
  Contact an authorized service for a short time immediately fol- facility, preferably an authorized Enter a new maximum speed. lowing the Pre-Ride-Check. BMW Motorrad retailer. Possible cause: Launch Control not ready Encoding missing The anti-theft alarm system bat- with Pro riding modes tery is completely discharged.

• Page 39: Service Display

  Fuel reserve connected for a longer time. Consult a certified workshop, Approx. 1.1 gal (Approx. 4 l) preferably an authorized BMW Motorrad retailer, for Refueling ( 90). If service is due within 1,000 km setting of the date. (700 miles), the remaining…

• Page 40: Cruising Range

  The determined range is dicates the distance that can still an approximate reading. be driven with the remaining fuel. BMW Motorrad therefore This distance is calculated based recommends that you do not on fuel quantity and average con- try to use the full range before sumption.

• Page 41: Operation

  Operation Steering and ignition lock … 40 Cruise control ….. . . 57 Ignition .

• Page 42: Steering And Ignition Lock

  Ignition Steering and ignition lock Switch on ignition Keys You are provided with 2 ignition keys. Should you lose your keys please refer to the information regard- ing the electronic immobilizer (EWS) ( 41). Turn the ignition key to posi- A single key fits the steering and tion 1 while moving the handle- ignition lock, the fuel filler cap…

• Page 43: Electronic Immobilizer

  Switch off ignition recognized as «authorized» for Replacement and spare keys are your motorcycle. only available through an autho- rized BMW Motorrad retailer. NOTICE The keys are part of an inte- grated security system, so the A further key attached to the…

• Page 44: Lights

  Lights WARNING Parking lights Operation of the emergency The parking lights come on au- ON/OFF switch when riding. tomatically when the ignition is Danger of falling due to blocking switched on. of rear wheel. Do not operate the emergency NOTICE ON/OFF switch when riding.

• Page 45: Hazard Warning Flashers

  Hazard warning Ignition can be switched off. Switch on ignition and press flashers button 1 again to switch off Switching on hazard hazard warning flashers. warning flashers Turn indicator Switch on ignition. Operating turn indicators NOTICE Switch on ignition. The hazard warning flashers Immediately after switching off place a strain on the battery.

• Page 46
  NOTICE The turn indicators automati- cally switch off when the defined driving time and distance have been reached. The defined rid- ing time and distance can be set by an authorized BMW Motorrad retailer.

• Page 47: Multifunction Display

  Multifunction display Overview — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Odometer Standard display Select displays in multi- function display ( LAP TIMER ( LIMIT ( Factory setting for WARN SPEED ( 118) RACE INFO ( 103) SETUP MENU ( 111)

• Page 48
  RANGE Selecting displays in Cruising range Repeatedly press SET 2 until TRIP 1 desired display is selected. Trip distance 1 multifunction display TRIP 2 The following displays are avail- Trip distance 2 Switch on ignition. able: Average consumption All information required for LAPTIMER: The lap times volume per distance or vice operation on public roads is…

• Page 49: Resetting Tripmeter

  LIMIT is shown, press and Press and hold TRIP 1 until hold SET 2 to set current driv- tripmeter has been reset. ing speed as new limit. Trip mileage = RACE INFO ENTER Resetting average data SETUP MENU ENTER shown, press and hold SET 2 Switch on ignition.

• Page 50: Alarm System

  The alarm can be set off by: turn indicators flash. The alarm sition. tone type can be adjusted by Switch on ignition. an authorized BMW Motorrad Turn indicators light up once. retailer.

• Page 51
  DWA AUTO Confirmation tone sounds once to the start and finally to the de- Parameter 5 and (if programmed). sired display. its current value 6 are dis- played. DWA is now switched off. Press and hold SET 2 to open the menu.

• Page 52: Clock

  DWA AUTO OFF : DWA is Minutes 4 flash. deactivated. Briefly press TRIP 1 to in- Press and hold SET 2 to save crease minutes. the set value. Briefly press TRIP 2 to de- The value 6 no longer flashes. crease minutes.

• Page 53: Automatic Stability Control

  NOTICE seconds. out, and starts to flash if self-diagnosis has not been com- ABS indicator light contin- The BMW Motorrad Race ABS pleted. ues to be lit up. function can also be deactivated If the coding plug for the while driving.

• Page 54: Control

  ASC indicator and warning ASC indicator and warning NOTICE light continues to be lit up. light remains off or contin- ues to flash. The Automatic Stability Control ASC is deactivated. (ASC) can also be deactivated ASC activated. while riding. Switch on ASC As an alternative, the ignition can also be switched off and then on again.

• Page 55: Riding Mode

  Use of the riding modes until the DTC —indicator light 2 out, and if self-diagnosis changes its display behavior. BMW Motorrad has developed 5 has not been completed, it be- DTC indicator light starts to riding scenarios for your motor- gins to flash.

• Page 56
  Setting riding mode Riding on wet roads. Sporty riding on dry roads. Switch on ignition ( 40). Riding on racetracks with se- ries tires. with Dynamic Traction Control (DTC) Riding on racetracks with se- ries tires. Riding on racetracks with rac- The selection arrow 2 and the ing tires while taking settings selectable riding modes 3 are…
• Page 57
  Selection arrow 2 and inactive riding modes are hidden. The new riding mode is acti- vated during operation under the following conditions: The throttle grip is in the neu- tral position. The brake lever is not being operated. The following riding modes can with Pro riding modes WARNING be selected:…
• Page 58
  ually displayed, but instead only with Pro riding modes Do not use the encoding plug after the following events for a on public roads. USER : Riders can combine limited time: the settings from all available Switch off ignition ( 41).

• Page 59: Cruise Control

  Cruise control Storing speed with cruise control Switching on cruise control To do so, press in locking de- vice 2 and pull off cap. Briefly press button 1 forward. Insert coding plug. Adjustment range for Switch on the ignition. cruise control For safety reasons, after the coding plug is connected, the 19…130 mph (30…210 km/h)

• Page 60
  Acceleration Decreasing speed Deactivating cruise control Actuate brakes, clutch or throt- tle grip (take back throttle be- yond back position) to deacti- vate cruise-control system. NOTICE When changing gear using the Pro Gear-shift Assistance func- Briefly press button 1 forward. Briefly press button 1 back- tion, the cruise-control system ward.

• Page 61: Speed Warning

  Resuming former cruising Indicator light for cruise- Speed warning ( 118) control system lights up. speed Switching off cruise control Briefly press SET 2 repeat- Briefly push button 1 back to LIMIT edly until is shown in return to the speed saved be- display.

• Page 62: Heated Handlebar Grips

  To set current speed as new When the preset speed is ex- To deactivate the speed warn- limit: press and hold SET 2. ceeded, the shiftpoint light 1 re- ing: Press and hold TRIP 1 un- sponds by lighting up or flashing appears in the display.

• Page 63: Rider And Passenger Seats

  Rider and passenger NOTICE seats The increase in power Removing hump cover consumption caused by the with passenger seat cover heated grips can drain the battery if you are riding at low Park motorcycle, ensuring that engine speeds. If the battery is support surface is firm and inadequately charged, the heated level.

• Page 64: Removing Passenger Seat

  Installing hump cover Install the passenger seat Lock lock with ignition key. with passenger seat cover Removing passenger seat Park motorcycle, ensuring that support surface is firm and level. Mount passenger seat in mounts 1 on left and right. Mount hump cover in mounts 1 on left and right.

• Page 65: Helmet Holder

  Installing driver’s seat Lock seat lock with ignition key. Removing rider`s seat Press cover of driver’s seat over screw sockets toward Mount rider`s seat in mount 2, front somewhat and hold in then position over screw sock- place. ets 3. When doing so, make Press cover of driver’s seat Install screws 1.

• Page 66: Luggage Straps

  Luggage straps Securing luggage on motorcycle Remove passenger seat 62). Turn over passenger seat. Use luggage loops 1, e.g. in ATTENTION conjunction with passenger footrests, to lash luggage onto Incorrect positioning of the passenger seat. When doing helmet lock. so, make sure that the rear trim Fairing scratched.

• Page 67: Setting

  Setting Mirrors ……66 Headlight ……66 Brakes .

• Page 68: Mirrors

  If there are doubts as to the cor- sition by turning it. rect headlight range, have the adjustment checked by a spe- Headlight cialized workshop, preferably by an authorized BMW Motorrad Adjusting headlight for retailer. RHD/LHD traffic This motorcycle’s headlight fea- Brakes tures a symmetrical low beam.

• Page 69: Steering

  Steering Basic steering damper NOTICE Adjusting steering damper adjustment setting The adjusting screw can be Opens at 8 clicks (starting at turned more easily if you push fully closed) (Highway opera- the brake lever forward when tion) doing so. Opens at 5 clicks (starting at Adjustment options: fully closed) (Racetrack) From position 1: Largest dis-…

• Page 70
  Adjusting spring preload Load motorcycle with driver. on front wheel With the assistance of a helper, measure distance D between without Dynamic Damping points 1 and 2 again and cal- Control (DDC) culate difference (spring deflec- tion) between the measured Park motorcycle, ensuring that values.
• Page 71
  Ensure that settings on left and Measure distance D between right sides are identical. lower edge 1 of immersion tube and front axle 2. Adjusting spring preload Load motorcycle with driver. on front wheel Measure distance D between with Dynamic Damping Control points 1 and 2 with assistance (DDC) of a 2nd person.
• Page 72
  Adjusting spring preload Adjustment of spring at rear wheel preload dependent on without Dynamic Damping loading Control (DDC) Spring deflection of rear wheel Park motorcycle, ensuring that 0.31…0.47 in (8…12 mm) (With support surface is firm and rider 187 lbs (85 kg)) level.
• Page 73
  To increase the spring deflec- Switch on ignition. carrier and screw 2 of chain tion (reduce spring preload), guard. Start engine to avoid discharg- use the tool from the onboard ing battery. Load motorcycle with driver. tool kit to turn the adjustment With the assistance of a helper, NOTICE ring 2 in direction B.

• Page 74: Damping

  Damping Setting Damping must be adjusted to the road conditions and the spring preload. A rough road surface requires softer damping than a smooth road surface. An increase in spring preload To decrease the spring deflec- Adjust compression damping requires firmer damping, a re- tion (increase spring preload), with adjusting screw 1 and red duction in spring preload re-…

• Page 75
  ing 2 points to a higher scale ing 2 points to higher figure on scale. figure. To decrease damping: turn To decrease damping: turn adjusting screw with tool from adjusting screw with tool from onboard tool kit so that mark- onboard tool kit so that mark- ing 2 points to lower figure on ing 2 points to a lower figure…
• Page 76
  ing 2 points to a higher scale Factory settings for figure. jounce/rebound at front To decrease damping: turn adjusting screw with tool from Position 4 onboard tool kit so that mark- ing 2 points to a lower figure Adjusting compression on the scale.

• Page 77: Ddc

  ing 2 points to a higher scale Factory settings for figure. jounce/rebound at rear To decrease damping: turn adjusting screw with tool from Position 4 onboard tool kit so that mark- ing 2 points to a lower figure on the scale. Setting Rebound stage, basic Damping must be adjusted to the…

• Page 78
  Park motorcycle, ensuring that Adjust damping as desired with NOTICE support surface is firm and TRIP 1 and SET 2. level. +1 … +7 : Damping increase Damping is adjusted and saved Select submenu ( 113). in a maximum of seven steps separately for all riding modes in SETUP DDC-SYS (harder).
• Page 79
  SETUP DDC-SYS DMP: sub- The value next to During the alignment, do not sit menu has been selected. flashes. on the motorcycle and remove any cargo or luggage. Adjust damping as desired with FRONT DMP Adjusting TRIP 1 and SET 2. Select submenu ( 113).
• Page 80
  CALIB DONE is displayed in line 3 and 4. If CALIB FAIL is displayed: Repeat alignment. CALIB DONE is not displayed after repeated calibration, please contact a BMW authorized workshop, preferably an authorized BMW Motorrad retailer.

• Page 81: Riding

  Riding Safety instructions ….80 Observe checklist ….81 Starting .

• Page 82: Safety Instructions

  Your authorized cycle: Burn hazard BMW Motorrad retailer will be Settings of spring-strut and happy to advise you and has shock absorber system the correct clothing for every CAUTION Imbalanced load purpose.

• Page 83: Observe Checklist

  Catalytic converter Danger of overheating Observe checklist If misfiring causes unburned fuel Use the following checklist to ATTENTION to enter the catalytic converter, check your motorcycle at regu- there is a danger of overheating lar intervals. Engine idling for a lengthy and damage.

• Page 84: Starting

  Starting to disengage clutch and twist with Dynamic Damping Control (DDC) throttle grip slightly. Starting engine Adjusting spring preload at rear Switch on ignition. wheel ( 71). Pre-Ride-Check is carried out. with Dynamic Damping Control (DDC) ABS self-diagnosis is Adjusting damping on rear performed.

• Page 85
  Phase 2 ABS self-diagnosis The universal warning light changes from yellow to red. The readiness for operation of the BMW Motorrad Race ABS Phase 3 is checked by the self-diagnosis. The tachometer needle drops The self-diagnosis routine runs back to zero.
• Page 86
  The self-diagnosis routine Phase 2 is determining whether ASC self-diagnosis Check wheel sensors while BMW Motorrad ASC is ready for completed starting off. operation. The self-diagnosis The ASC symbol is no longer ABS indicator light flashes. routine runs automatically when displayed.

• Page 87: Breaking In

  The self-diagnosis routine BMW Motorrad retailer. is determining whether Watch all warning and indicator BMW Motorrad DTC is ready for lights on the display. Breaking in operation. The self-diagnosis DTC self-diagnosis not Engine routine runs automatically when completed you switch on the ignition.

• Page 88: Brake Pads

  This WARNING speed monitoring function is switched off during the running- New brake pads. in check by your authorized Extension of the braking distance. BMW Motorrad retailer. Accident hazard. Brake early.

• Page 89: Shifting Gears

  Shifting gears makes the decision as to when Shiftpoint light goes out: shift- ing speed reached to change gear. Shiftpoint light NOTICE The engine rpm limits and the upshift light’s display characteris- More detailed information on Pro tics can both be adjusted in the Gear-shift Assistance can be SETUP menu.

• Page 90: Brakes

  Locking up of the front wheel gear change. change gear and initiates gear- is prevented by BMW Motorrad shift assistance. Brakes Race ABS. When driving at constant With the frequently instructed…

• Page 91: Parking Your Motorcycle

  Wet, soiled brakes road surface. Due to the miss- Brake early until the full braking ing wheel load, the ABS must action is available again. Moisture and dirt on the brake already prevent a tendency of the rotors and the brake pads result Parking your front wheel to lock up with min- in a decrease in the braking ac-…

• Page 92: Refueling

  additives, e.g. manganese or Alternative fuel quality ATTENTION iron. Loading of the side stand ATTENTION Super unleaded (minor restric- with additional weight. tions with regard to power and Component damage cause by Use of Ethanol E85 as fuel. fuel consumption) (max. 10 % tipping over.

• Page 93
  Do not overfill the fuel tank. NOTICE ATTENTION When refueling after running on fuel reserve, the resulting total Fuel attacks plastic surfaces. fuel quantity must be greater Surfaces become unattractive or than the fuel reserve, so that the cloudy. new filling level is detected and Immediately clean plastic parts the fuel warning light is switched after contact with fuel.

• Page 94: Secure Motorcycle For Transport

  Fuel reserve Approx. 1.1 gal (Approx. 4 l) Press fuel tank cap down firmly to close. Remove key and close protec- tive cap. Secure motorcycle for ATTENTION ATTENTION transport Motorcycle tips to the side Pinching of components. Protect all component surfaces when raising.

• Page 95
  Fasten rear straps on both sides to the passenger foot- pegs and then tighten them. Tension all straps evenly; the motorcycle should be pulled down against its springs with the suspension compressed as much as possible.

• Page 97: On The Racetrack

  On the racetrack Display for racing mode … . . 96 Shift pattern reversal ….136 LAPTIMER .

• Page 98: Display For Racing Mode

  Display for racing mode Multifunction display Current angle of inclination during cornering Direction for angle of incli- nation \ = left | = vertical / = right Maximum angle of inclina- tion for left and right Factory setting for BANK DISP ( 119) ABS control intervention…

• Page 99
  DTC torque reduction with Dynamic Traction Control (DTC) Factory setting for DTC DISP ( 119) DTC setting with Dynamic Traction Control (DTC) Adapt DTC ( 127)

• Page 100: Laptimer

  LAPTIMER LAP TIMER The fastest of the stored laps, marked with «BESTLAP». The display in these lines Multifunction display can be switched over. The all-time best lap time, without a marking. Individualize LAPTIMER 100). The running time of the current lap.

• Page 101
  Overview of LAP TIMER — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Odometer Standard display Select displays in multi- function display ( 46). Individualize LAPTIMER 100). Start time recording 100). Interrupt/continue time en- try ( 101)
• Page 102
  Individualizing LAPTIMER LAPTIMER display structure When driving over Start/Finish 121) line, press button 1 again to start recording for next race Starting time recording lap. The data of the preceding race The LAPTIMER is opened. lap will be saved. 2 restarts at 00:00:00 If the display mode is exited during a recording, then the…
• Page 103
  Interrupting time entry The infrared receiver available as an optional accessory must Time recording is running. be connected to the connector for optional accessories under the right-hand fairing side panel 138). In the SETUP RACETRACK, the LAPTIMER trigger mode must be set to LAPTM TRIG AUTO or LAPTM TRIG EX- Press and hold TRIP 1 to stop TERN (…
• Page 104
  have been deleted from the better than that of the previous RACE INFO fastest lap then a new fastest lap can be anticipated. The «fastest is displayed. lap» light 1 lights up. Fastest lap expected This function must be activated SETUP RACETRACK in the menu (…

• Page 105: Race Info

  RACE INFO RACE INFO Part 1 — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Delete all-time best lap. Information on the current best lap. Three displays in alterna- tion. Information on each race lap ( 106) Deleting currently best lap.

• Page 106
  RACE INFO Part 2 — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Information on lap 01. Select saved lap ( 105). Information on each race lap ( 106) Delete lap ( 108). Information on lap 02. Total of all lap times and lap distances.
• Page 107
  Selecting saved lap they are displayed in the reverse order: RACE INFO is displayed. BEST- All-time best lap time EVER BEST Best stored lap time LAST Last stored lap time LAP 01 All other stored laps … LAP 60 The totals of all saved lap times and lap distances TOTAL Delete the stored data…
• Page 108
  Information on each race In alternation for the in- dicted lap: Top speed (max) Average speed (Ø) Minimum speed (min) Maximum angle of incli- nation for left and right of indicated lap Race lap to which dis- played data refer Lap time of displayed race In alternation for the in- dicted lap:…
• Page 109
  ABS control intervention: «ABS» displayed = lap with ABS control intervention «ABS» hidden = lap with- out ABS control interven- tion Maximum deceleration in the indicated lap Maximum DTC torque re- duction in the indicated lap 10 DTC setting in the indi- cated lap 11 Riding mode in the indi- cated lap…
• Page 110
  BEST-EVER Clearing recording recording that has already been is deleted: —:—:— deleted. RACE INFO is displayed. All recordings have now been Deleting lap deleted. RACE INFO EXIT is dis- RACE INFO is displayed. played. All-time best lap BEST- The all-time best lap ( EVER ) is the fastest of all recorded racing laps and is…
• Page 111
  BEST Exiting RACE INFO Activating standard : The lap that previously had been the second best lap display is adopted as the new best lap. LAST : The lap that previously had been the second-to-the- last lap is adopted as the new last lap.
• Page 112
  LIMIT Pressing and holding TRIP 1 switches the speed warn- LIMIT OFF ing off ( is displayed.

• Page 113: Setup Menu

  SETUP MENU Overview SETUP MENU — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Select submenu ( 113) Display submenu with Dynamic Damping Control (DDC) SETUP DDC-SYS 113) Set parameter ( 115) Display submenu SETUP EQUIPMENT 113) Display submenu SETUP RACETRACK…

• Page 114
  Display submenu Only with USER riding mode active with Pro riding modes SETUP USER-MODE 115) Reset all parameters FAC- TORY RESET Exit SETUP MENÜ Exit settings ( 116)
• Page 115
  Selecting submenu Briefly press TRIP 1 or SET 2 With spring travel sensor for repeatedly until desired sub- front forks: Front rebound- FRONT REB menu is displayed. stage damping Press and hold SET 2 to open With spring travel sensor for desired submenu.
• Page 116
  UNIT CLOCK 24 or leave deactivated Switch the display for the cur- DWA AUTO OFF UNIT CLOCK 12 rent and maximum delay on BRAKE DISP ON or off Set time display SETUP RACETRACK BRAKE DISP OFF CLOCK TIME Set brightness Submenu for switching over SETUP RACETRACK DISP BRIGHT…
• Page 117
  TRIG EXTERN Display duration for : Operation Dynamic traction control for DTC RAIN last stopped lap time only via infrared receiver. wet roads LAPTM HOLD with Pro riding modes Sport mode for Dy- Anti-rebound time (waiting namic Damping Control Adjust the speed for the pit DDC SPORT time until new lap can be PIT LIMIT ……
• Page 118
  Exiting settings Repeatedly press TRIP 1 or SETUP MENU SET 2 until EXIT is displayed. Press and hold SET 2 to exit SETUP MENU SETUP MENU ENTER indicated. Press and hold SET 2 until dis- played parameter begins to Press and hold TRIP 1 flash.

• Page 119: Setup Ddc-Sys

  -7 … +7 Reading display range Factory setting: 0 -7 (soft) … +7 (stiff) Factory setting: 0 NOTICE The spring travel sensor required for the separate adjustment of the rebound and compression stage is not offered by BMW Motorrad. It is available…

• Page 120: Setup Equipment

  Further SETUP EQUIPMENT Speed warning information can be requested Display brightness under «hp-race-support@bmw- motorrad.com». Leveling sensor calibration LIMIT The speed is set in the display. If the riding speed Five different intensities are avail- SPEED! exceeds this limit,…

• Page 121
  Light error Lean angle Dynamic Traction Control with Dynamic Traction Control (DTC) If the turn indicators are removed Adjustment of the display for an- or the license plate carrier is de- gle of inclination: angle of incli- tached for track use, the vehicle’s nation, direction for angle of incli- Adjustment of the displays for electronic monitoring system will…

• Page 122: Setup Racetrack

  Deceleration SETUP RACETRACK Switch-off speed of shifting flasher Switch-on speed of shifting flasher Adjustment of the displays for deceleration: Current and max- Adjustment of the switch-off imum deceleration in m⁄s², and speed for the shiftpoint light. Adjustment of the switch-on ABS intervention.

• Page 123
  Brightness of shifting Flashing frequency of When 8 is selected, the shift- point light and the speed warn- flasher shiftpoint light ing flash rapidly. LAPTIMER display structure The LAPTIMER display struc- ture can be selected from six ver- sions. Adjustment of shifting flasher Adjustment of the flashing fre- brightness as a percentage of quency of the shiftpoint light and…
• Page 124
  Version 2 Version 3 Version 4 The required time of the previous The required time of the previous Running time of the current lap lap is shown in the third line and lap is shown in the third line and is shown in the third line and the the running time of the current the best lap time of the stored…
• Page 125
  Display duration for last stopped time Version 5 Version 6 The funning time of the cur- The third line remains empty and rent lap is shown in the third line the running time of the current Adjustment of the display dura- and the all-time best lap time lap is shown in the fourth line.
• Page 126
  Minimum lap time Reading display range Fastest lap 0, 10, 30, 45, 60, CUSTOM Factory setting: 10 When determining the lap times, The «fastest lap expected» func- the time can be set which must tion ( 102) is activated or de- elapse after the first received sig- activated.

• Page 127: Setup User-Mode

  Speed limiter for pit lane SETUP USER-MODE with Pro riding modes The various possibilities for start- ing time recording are set. Reading display range Adjustment of the maximum Adjustment of antilock brake sys- AUTO, EXTERN, MANUAL speed (±100) of the engine when USER-MODE tem ABS in Factory setting: AUTO…

• Page 128
  ENGINE ENGINE Adjustment of the Dynamic Trac- Adjustment of the Dynamic Adjustment of the USER- tion Control in the Damping Control in the throttle response in the USER- MODE USER-MODE MODE. Reading display range Reading display range Reading display range RAIN, SPORT, RACE, SLICK SPORT, RACE, SLICK RAIN, RACE, SLICK…

• Page 129: Dtc

  Briefly press button 2 (-) to de- NOTICE crease value 3. with Dynamic Traction Control The set value 3 is shown in The DTC can also be adjusted (DTC) the multifunction display and is while riding. between DTC setting +1 … +7 : Reduction of slip The permissible slip on the rear at rear wheel by a maximum…

• Page 130: Start Of Race

  BMW Motorrad rec- that, for example, the maximum The number of subsequent starts ommends switching off the DTC propulsion on level ground is set with Launch Control is limited for temporarily. with the front wheel slightly lifting clutch protection. The number Note that the rear wheel will spin off.

• Page 131
  Start with Launch Control possi- Clutch cool-down time ble. Perform start as described be- low. Approx. 20 min (With the en- gine switched off) Perform start as usual, open throttle grip at least to such an extent that speed limiting is reached.

• Page 132: Speed Limiter For Pit Lane

  Speed limiter for pit Hold down starter button 1. Speed for deactivation Twist throttle grip open until lane of speed governing for PIT LIMIT … is reached. launch control with Pro riding modes The engine speed is limited Approx. 43 mph (Approx. with ignition interruption.

• Page 133: Mirror Removal And Installation

  Remove nuts 1 on left and rier right and take off mirror. Use the HP Race Cover Kit from Thread-locking compound: BMW Motorrad to cover the ex- mechanical posed screw sockets and secure the mounting attachment. 6 lb/ft (8 Nm)

• Page 134: Removing And Installing License-Plate Carrier

  Removing and installing SETUP EQUIPMENT in the submenu. license-plate carrier Thread out connector 1 with Remove license-plate cable through lower rear sec- carrier tion 2. ATTENTION with anti-theft alarm system (DWA) Removing the number plate carrier. Remove cable tie (arrow) Expiry of operating license for and separate connector 1 for public roads.

• Page 135
  SETUP EQUIPMENT in the DWA AUTO submenu with the function. Remove screw 4. Remove anti-theft alarm system 2 while unhooking at bracket 3. Remove screws 4 with wash- Position license-plate carrier 2 ers 3. and thread in wiring harness 1. Take off license-plate car- Install screws 4 with wash- rier 2 and thread out wiring…

• Page 136: Front Turn Indicator

  with anti-theft alarm system Connect connector 1, position (DWA) and fasten cable tie (arrow). NOTICE If the light defect warning message for racetrack use is suppressed in the display, this SETUP must be activated in the EQUIPMENT submenu SETUP EQIP: Insert anti-theft alarm system 2 under the WARN LAMP ON…

• Page 137
  also apply logically for the left side. Remove fairing side panel 183). Remove screw 1 and take off Fasten fairing side panel in turn indicator 2. grommet 3 and detent pin 4. Guide cable through fairing Install screws 2. side panel. Detach cable 3 from bracket 4.

• Page 138: Shift Pattern Reversal

  Installing front turn signal Guide cable through fairing Installing fairing side panel side panel. 184). Shift pattern reversal Shift pattern for racing mode For the racing mode, the shift pattern can be reversed by mod- ifying the gear-shift rod. Shift pattern reversal means that the Remove the screw 1 on the gearshift lever must be actuated…

• Page 139
  with Pro shift assistant Clean thread 1. Insert screw through ball joint and washer and install in thread Slide protective cap 2 onto Clean thread 1. for shift pattern reversal. gear-shift rod 4. Slide protective cap 2 onto Remove screw 3. gear-shift rod 4.

• Page 140: Connector For Optional Acces

  Connector for optional Under right-hand fairing side panel accessories Equipment The vehicle is equipped with the following connectors for special and racing accessories: Infrared receiver Spring travel sensor Optional accessory Insert screw through ball joint HP Race Data Logger and washer and install in thread for shift pattern reversal.

• Page 141
  Under left-hand fairing side panel Connector for DWA and Connector for DWA and HP Race data logger HP Race data logger Terminating resistor Optional accessories (con- nector with power supply + Under passenger seat Mounting special and LIN; e.g. as for navigation racing accessories without anti-theft alarm system system)

• Page 142: Sories

  Unlock protective cap or ter- Remount cover cap or termi- minating resistor and pull off nating resistor after removing connector. connector. Mount special or racing acces- Remount cover cap or termi- sories. nating resistor after removing connector. NOTICE Installing fairing side panel 184).

• Page 143: Technology In De

  Technology in detail Anti-Lock Brake System … 142 Dynamic Damping Control ..144 Traction Control ….145 Riding mode .

• Page 144: Anti-Lock Brake System

  If the maximum transferable brak- tact to the road. At this point in ing force is exceeded when the Spinning the rear wheel with time, the BMW Motorrad Integral rider increases the brake pres- the front brake applied (Burn ABS must assume extremely low…

• Page 145
  Under these circumstances the completed before the error will rear wheel can lift off the ground, be displayed. BMW Motorrad Race ABS and the outcome can be a high- Apart from problems on the noticeable to the rider? siding situation in which the mo-…

• Page 146: Dynamic Damping Control

  «harder» direction. On the rear wheel, momentum take over and even WARNING BMW Motorrad Race ABS is un- compression stage and rebound Failure to have maintenance able to counteract their effects. stage can be separately adjusted.

• Page 147: Traction Control

  Special situations Under the following unusual rid- is suitable for improving lap As lean angles increase, accel- ing conditions, BMW Motorrad times on the racetrack. eration potential is also progres- Traction Control may be deacti- sively restricted by the laws of Traction Control compares the vated automatically.

• Page 148: Riding Mode

  6 mph (min 10 km/h) by inserting the coding plug driving state. This case cannot on motorcycles with power be controlled by BMW Motorrad If the front wheel loses con- reduction. DTC. tact with the ground under ex-…

• Page 149
  The overrun cutoff is activated. Accident hazard. Expiry of oper- SLICK BMW Motorrad. The ating license for public roads. USER riding modes are Do not use the coding plug on The ASC system intervenes…
• Page 150
  Launch Control (L-CON) is de- SPORT mode so that minor drifts are activated. possible at the ends of curves. Throttle response The front wheel lift-off detec- The maximum torque is pro- tion is switched on and offers vided. The ABS system always inter- maximum support.
• Page 151
  The ABS system intervenes later in this riding mode. The Damping adjustment: Road = The ASC system intervenes wheels are still prevented from comfortable damping early enough to always prevent locking up, however the lift-off the rear wheel from spinning if Fine adjustment of damping is detection for the rear wheel is possible.
• Page 152
  also permitted, which means found only on racetracks. This lier than in the SPORT riding mode also assumes that the mo- it is possible to flip over back- mode. torcycle is riding with racing tires ward in extreme cases! ABS for rear wheel is deac- that have very good adhesion.
• Page 153
  Throttle response (ENGINE) gine speed limitation is effec- tive. RAIN SPORT RACE RACE ABS off SLICK SLICK Support by the ABS function is The following torque curves deactivated. apply for motorcycles with No support for integral pres- SPORT power reduction and mounted sure buildup when only the RACE coding plug: RACE/SLICK set-…

• Page 154: Pro Gear Shift Assistant

  Motorcycle must be stopped Shifting times are faster than Your motorcycle is equipped with with the ignition switched on when the clutch is used to a Gear Shift Assistant originally change gears. developed for racing but now or (during riding) specially adapted for use in pub- Throttle grip must be twisted For the system to detect the rid-…

• Page 155
  Changing the accelerator twist- Idle speed grip position during the gear- shift sequence may cause the function to abort and/or the gear 1250 min (Engine at operat- change to fail. No support is pro- ing temperature) vided by the Gear Shift Assistant during gear changes made using the clutch.

• Page 157: Maintenance

  Maintenance General instructions ….156 Fuses ……188 Onboard tool kit .

• Page 158: General Instructions

  Reversible screwdriver in- Adjusting spring preload you can obtain from your autho- sert at rear wheel ( 71). rized BMW Motorrad retailer. Phillips PH1 and Torx T25 Reversible screwdriver with Removing and installing Special tools and thorough spe- Phillips and straight blade body panels.

• Page 159: Front Wheel Stand

  74). without Dynamic Damp- ATTENTION ing Control (DDC) Adjusting compression Use of the BMW Motorrad damping (jounce) at rear front wheel stand without an wheel ( 74). additional center or auxiliary Spare fuses with gripper Use basic stand (83 30 0 402 stand.

• Page 160: Rear-Wheel Stand

  Rear-wheel stand adapter inserted into the front suspension. Mounting rear-wheel Adjust the height of the aux- stands iliary stand so that the front wheel is lifted slightly off the ground. Insert the service adapter (83 30 2 152 840) 1 at the left and right into the front suspension.

• Page 161: Engine Oil

  Install the service adapter (83 Turn in the bracket 2 with the Attach the rear wheel stand to 30 2 152 841) 1 on the left long sides facing the outside. the rear wheel swing arm and and right into the rear wheel press it on the ground evenly.

• Page 162: Topping Up Engine Oil

  Have oil level corrected at an authorized service facility, between MIN- and MAX mark preferably an authorized BMW Motorrad retailer. Engine oil, capacity Topping up engine oil SAE 5W-40, API SL/ Park motorcycle, ensuring that JASO MA2, Additives (for…

• Page 163: Brake System

  Add engine oil up to specified From rear looking at brake Have the brakes checked at an level. pads 1. authorized workshop, preferably Check engine oil level ( 159). an authorized BMW Motorrad Install cap of oil fill location 1. retailer.

• Page 164
  Use of unsuitable brake BMW Motorrad retailer. pads. Failure of the brake system due If genuine BMW Motorrad to loss of the brake pads. brake pads are not installed, Only use brake pads with a be sure to check thickness of…
• Page 165
  Have the brake pads replaced at an authorized service facil- ity, preferably an authorized BMW Motorrad retailer. Checking front brake fluid level Conduct a visual inspection of Rear brake-pad wear the brake pad thickness. Direc-…
• Page 166
  Check brake fluid level regularly. Have the defect corrected as soon as possible by an autho- rized workshop, preferably an authorized BMW Motorrad re- Read off brake fluid level at tailer. Front brake fluid level brake-fluid reservoir 1. Checking rear brake fluid…

• Page 167: Clutch

  Check brake fluid level regularly. Have the defect corrected as soon as possible by an autho- rized workshop, preferably an authorized BMW Motorrad re- Check level of brake fluid in tailer. Rear brake fluid level rear brake-fluid reservoir 1. Clutch…

• Page 168: Coolant

  Checking clutch lever play Adjusting clutch lever Coolant play Checking coolant level Make sure ground is level and firm and park motorcycle. Operate clutch lever 1 until resistance is felt. To increase clutch play: turn Measure clutch play A be- the screw 2 into handlebar fit- tween handlebar fitting and ting.

• Page 169: Tires

  Poorer handling characteristic of the motorcycle. Reduced life of tires. Ensure proper tire inflation pressure. WARNING Valve inserts open of their own accord at high speeds. Open cap 1 of expansion tank. Sudden loss of tire inflation pres- Coolant, specified level Add coolant up to specified sure.

• Page 170: Wheel Rims And Tires

  Make sure ground is level and Correct tire pressure. For every size of tire, firm and park motorcycle. BMW Motorrad has tested and Wheel rims and tires Measure tire tread depth in approved certain makes as main tread grooves with wear roadworthy.

• Page 171: Removing Front Wheel

  BMW Motorrad retailer. In some cases the data stored in the…

• Page 172: Installing Front Wheel

  BMW Motorrad front wheel stand for lifting the motorcycle. removed. Installing the auxiliary stand on Loosen clamping screws 2. the front wheel ( 157). Remove quick-release axle 1 while supporting wheel. Roll front wheel forward to re- move it.

• Page 173
  Always have the tightening torques checked by a spe- Lift front wheel and install cialized workshop, preferably Clamping screw in axle quick-release axle 1 with an authorized BMW Motorrad adapter retailer. torque. Tightening sequence: Tighten Quick-release axle in ATTENTION…
• Page 174
  Removing rear wheel and position cable guide 2. bore and fasten with screw 1. Install screws 3 with specified Raise motorcycle, preferably torque. with a BMW Motorrad rear- wheel stand. Radial brake calipers on Mounting rear-wheel stands the axle adapter 158).
• Page 175
  Loosen lock nuts 2 on left and right. Loosen adjusting screws 3 on left and right. Remove adjusting plate 4 and slide axle as far as possible to- ward inside. Press brake caliper 1 against Roll rear wheel as far forward brake disk 2.
• Page 176
  200 ⁄ 55 ZR 17 or vice versa, the parameters of the control systems must be encoded by a BMW authorized workshop, preferably by a BMW Motorrad Roll rear wheel toward rear retailer. out of swing arm while pulling brake caliper carrier 1 toward…
• Page 177
  Mount brake caliper carrier 1 in Roll rear wheel further into Roll rear wheel as far forward guide 2. swing arm while simultaneously as possible and lay chain 1 on pushing brake caliper carrier 1 sprocket. toward the front. Make sure that the wheel speed sensor 1 is not Insert right-hand adjusting damaged when rolling the rear…

• Page 178: Light Sources

  through the shim in the brake- Park motorcycle, ensuring that caliper support and the rear support surface is firm and wheel. level. Make sure that quick-release Switch off ignition. axle meets the recess for key surfaces. Fasten brake line in holder 2 and install screw 1.

• Page 179
  circumstances the high levels of heat radiation can damage the headlight assembly. Bulbs for low-beam headlight H7 / 12 V / 55 W Bulb for high-beam Remove the cover 2 to replace Release wire spring 4 from headlight the light source for the high- catch on left and right and fold H7 / 12 V / 55 W beam headlight.
• Page 180
  Install cover. Replacing light source for left-hand parking light Park motorcycle, ensuring that support surface is firm and level. Switch off ignition. Install light source 5. Start by Push the retainer 2 downward inserting lug 6, then press light (using a screwdriver if nec- source into socket.
• Page 181
  Replacing defective light source. Bulb for parking light W5W / 12 V / 5 W To prevent dirt from being de- posited on the glass surface, always use a clean, dry cloth to Insert socket 3 in the head- Remove cover 1. hold the light source.
• Page 182
  Install the cover. Replacing front and rear turn indicator light sources Park motorcycle, ensuring that support surface is firm and level. Switch off ignition. Remove light source 4 from Insert light source 4 in light the socket. source socket. Replacing defective light source.
• Page 183
  Replace defective light source. Bulbs for flashing turn indicators, front RY10W / 12 V / 10 W Bulbs for flashing turn indicators, rear RY10W / 12 V / 10 W Pull glass on screw connection Install the light source 2 in the To prevent dirt from being de- side out of mirror housing.
• Page 184
  Pull license-plate light 1 out of Diode taillight light housing. If the taillight LEDs have failed, the taillight must be replaced. In this case: Contact an authorized service facility, preferably an authorized BMW Motorrad retailer. Press light source into socket. Remove light source from socket.

• Page 185: Fairings And Panels

  Press license-plate light 1 into Remove screw 1 on inside of Disconnect connector 5 for light housing. fairing side panel. turn indicator. Take off fairing side panel. Fairings and panels Protect connector on motorcy- cle 6 against soiling. Remove fairing side panel NOTICE The working steps described here for the right fairing side…

• Page 186: Jump-Starting

  Jump-starting Installing fairing side panel CAUTION Touching live parts of the ig- nition system when the en- gine is running. Electrocution Do not touch parts of the igni- tion system when the engine is Fasten fairing side panel in running. grommet 3 and detent pin 4.

• Page 187: Battery

  Battery the other end to the positive Danger of short circuit terminal of the donor battery. Use jump leads fitted with fully Maintenance instructions insulated crocodile clips at both Then clamp one end of the Correct upkeep, recharging and black jumper cable to the ends.

• Page 188
  Removing rider`s seat ( 63). (DWA) NOTICE BMW Motorrad has developed a trickle-charger specially designed for compatibility with the elec- tronics of your motorcycle. Using this charger, you can keep the battery charged during long pe-…
• Page 189
  Then remove positive battery with anti-theft alarm system Once battery is fully charged, cable 2. (DWA) disconnect charger’s terminal clips from battery terminals. Connect battery to vehicle NOTICE In the case of longer periods when the motorcycle is not be- ing used, the battery must be recharged regularly.

• Page 190: Fuses

  Park motorcycle, ensuring that box 1. cility, preferably an authorized support surface is firm and To replace main fuse, remove BMW Motorrad retailer, for set- level. cover 2. ting of the date. Remove passenger seat Pull defective fuse upward out 62).

• Page 191: Chain

  To extend and maximize Close fuse cover. the chain’s service life Locking device audibly en- BMW Motorrad recommends gages. Using a screwdriver, push the using BMW Motorrad chain Install the passenger seat chain in the middle between lubricant or: 62).

• Page 192: Adjusting Chain Tension

  the pinion and sprocket and Locknut of drive-chain measure the difference A. tensioning screw Chain sag 14 lb/ft (19 Nm) Tighten quick-release axle 1.8…2 in (45…50 mm) (Motor- nut 1 to specified torque. cycle unloaded on side stand) Rear-wheel quick-release If the measured value is outside axle in swinging arm the approved tolerance:…

• Page 193
  Permissible chain length max 5.7 in (max 144.30 mm) (Measured over the center of 10 rivets, chain tensioned) If the chain has reached the max- imum approved length: Contact an authorized service facility, preferably an authorized BMW Motorrad retailer.

• Page 195: Accessories

  Accessories General instructions ….194…

• Page 196: General Instructions

  Safety risk proved by BMW for this purpose. use regulations of your country. BMW Motorrad cannot exam- Your authorized BMW Motorrad ine or test each product of out-…

• Page 197: Care

  Care Care products ….. 196 Washing your motorcycle ..196 Cleaning sensitive motorcycle parts .

• Page 198: Care Products

  BMW Motorrad recommends Brake early until the brake ro- care products available at your that you use BMW Insect Re- tors and brake pads are dry. authorized BMW Motorrad mover to soften and wash off retailer.

• Page 199: Cleaning Sensitive Motorcycle

  Damage to plastic surfaces. ATTENTION salt, carefully clean chrome parts Do not use abrasive cleaners or with plenty of water and BMW Use of silicone sprays for cleaners containing alcohol or auto shampoo. Use chrome pol- care of rubber seals.

• Page 200: Store Motorcycle

  Store motorcycle with high air pollution or natural BMW Motorrad recommends Clean motorcycle. sources of dirt, e.g. tree resin or that you apply BMW Car Wax or pollen. Completely fill the motorcycle’s another wax containing carnauba However, remove particularly ag- fuel tank.

• Page 201: Technical Data

  Technical data Troubleshooting chart … . . 200 Performance data ….214 Threaded fasteners ….201 Fuel.

• Page 202: Troubleshooting Chart

  Troubleshooting chart Engine does not start at all or is very difficult to start. Possible cause Remedy Side stand extended and gear engaged Retract side stand. Gear engaged and clutch not disengaged Place transmission in neutral or disengage clutch. No fuel in tank Refueling ( 90).

• Page 203: Threaded Fasteners

  Threaded fasteners Front wheel Value Valid Quick-release axle in threaded bush M24 x 1.5 37 lb/ft (50 Nm) Clamping screw in axle adapter M8 x 35 Tighten the screws 6 times, alternating between one and the other each time 14 lb/ft (19 Nm) Radial brake calipers on the axle adapter M10 x 65…

• Page 204
  Rear wheel Value Valid Swinging-arm adapter on rear wheel swinging arm M8 x 30 15 lb/ft (20 Nm) Screw on adjustment ring M5 x 25 2 lb/ft (3 Nm) without Dynamic Damping Control (DDC) Spring strut on main frame M10 x 65 — 10.9 41 lb/ft (56 Nm) Mirrors Value…
• Page 205
  Shift rod on gearshift lever Value Valid Shift rod on gearshift lever M6 x 20 6 lb/ft (8 Nm) Micro-encapsulated or medium- strength screw lock…

• Page 206: Fuel

  Fuel Recommended fuel quality Premium grade unleaded fuel (max. 10 % ethanol, E10) 91 AKI (98 ROZ/RON) 91 AKI Alternative fuel quality Super unleaded (minor restrictions with regard to power and fuel consumption) (max. 10 % ethanol, E10) 89 AKI (95 ROZ/RON) 89 AKI Usable fuel quantity Approx.

• Page 207: Engine Oil

  Additives (for instance, molybdenum- based substances) are prohibited, because they would attack the coatings on engine components, BMW Motorrad recommends BMW Motorrad ADVANTEC Ultimate Oil Engine oil, quantity for topping up max 0.8 quarts (max 0.8 l), Difference between MIN and MAX…

• Page 208: Engine

  Engine Engine design Water/oil-cooled 4-cylinder four-cycle in-line en- gine with four valves per cylinders and two over- head cams Displacement 999 cc (999 cm Cylinder bore 3.1 in (80 mm) Piston stroke 2 in (49.7 mm) Compression ratio 13:1 Rated output 199 hp (146 kW), at engine speed: 13500 min with power reduction 107 hp (79 kW), at engine speed: 7750 min…

• Page 209: Clutch

  Clutch Clutch design Multi-disk oil-bath clutch, slipper clutch Transmission Transmission design Claw-shifted 6-speed transmission integrated in engine housing Transmission gear ratios 1.652 (76:46 teeth), Primary gear ratio 2.647 (45:17 teeth), 1st gear 2.091 (46:22 teeth), 2nd gear 1.727 (38:22 teeth), 3rd gear 1.500 (33:22 teeth), 4th gear 1.360 (34:25 teeth), 5th gear 1.261 (29:23 teeth), 6th gear…

• Page 210: Rear-Wheel Drive

  Rear-wheel drive Type of final drive Chain drive Type of rear suspension Two-arm aluminum swinging arm Number of teeth of rear-wheel drive (Pinion/ 17:45 sprocket) Secondary gear ratio 2.647 Frame Frame design Aluminum composite bridge frame, load-sharing engine Location of type plate Frame at front right on steering head Location of the vehicle identification number Frame at front right on steering head…

• Page 211: Suspension

  Suspension Front wheel Type of front suspension Upside-down telescopic forks Spring travel, front 4.7 in (120 mm), on wheel Rear wheel Type of rear suspension Two-arm aluminum swinging arm Type of final drive Chain drive Spring travel, rear 4.7 in (120 mm), on wheel Brakes Type of front brake Hydraulic radially operated twin disc brake with 4-…

• Page 212: Wheels And Tires

  Wheels and tires Recommended tire combinations An overview of the current tire approvals is avail- able from your authorized BMW Motorrad retailer or on the Internet at bmw-motorrad.com. Speed category of front/rear tires W, minimum requirement: 168 mph (270 km/h)

• Page 213: Electrical System

  Tire inflation pressure Tire pressure, front 36.3 psi (2.5 bar), with tire cold Tire pressure, rear 42.1 psi (2.9 bar), with tire cold Electrical system Fuses Fuse 1 10 A, Instrument cluster Fuse 2 4 A, Cutoff relay, diagnosis plug, anti-theft alarm system Fuse 3 Not in use…

• Page 214
  Battery Battery design AGM (Absorptive Glass Mat) battery. Battery voltage 12 V Battery capacity 8 Ah with anti-theft alarm system (DWA) 10 Ah Spark plugs Spark plugs, manufacturer and designation NGK LMAR9D-J Electrode gap of spark plug 0.03 in (0.8 mm) Light sources Bulb for high-beam headlight H7 / 12 V / 55 W…

• Page 215: Dimensions

  Dimensions Motorcycle length 80.7 in (2050 mm), across splash guard Motorcycle height 44.9 in (1140 mm), across windshield at DIN un- laden weight Motorcycle width 32.5 in (826 mm), across mirrors Rider’s seat height 32.1 in (815 mm), without driver Rider’s inside-leg arc, heel to heel 71.1 in (1805 mm), without driver Weights…

• Page 216: Performance Data

  Performance data Top speed min 124 mph (min 200 km/h)

• Page 217: Service

  Service Reporting safety defects … 216 BMW Motorrad Service … . 217 BMW Motorrad Mobility Services ……217 Maintenance procedures .

• Page 218: Reporting Safety Defects

  National Highway Traffic Safety Ad- ministration (NHTSA) in addition to notifying BMW of North America, LLC. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

• Page 219: Bmw Motorrad Service

  Services With its worldwide dealer net- work, BMW Motorrad can attend The BMW Motorrad Mobility Ser- To ensure that your BMW con- to you and your motorcycle in vices furnish you and your new sistently remains in optimal con- over 100 countries around the…

• Page 220
  700 mls before the en- tered values. BMW Service The specified service intervals BMW Service is carried out once apply to street operation. For a year. The scope of the ser- racing operation, adjust the inter- vices performed may be depen- vals in accordance with loading.

• Page 223: Maintenance Schedule

  Maintenance schedule BMW running-in check Standard BMW Service 222) Engine oil change with fil- Check valve clearance Checking the engine tim- Replace all spark plugs Replacing air filter Telescopic fork oil change Change the brake fluid in the entire system…

• Page 224: Standard Bmw Service

  Standard BMW Service Checking the tyre pressure and tread depth. The standard BMW Service in- Checking the side stands for cludes the following maintenance ease of movement. work: Lubricating the side stand. Performing the brief test using Checking the lighting and sig- the BMW Motorrad diagnosis nal system.

• Page 225: Confirmation Of Mainte

  Confirmation of maintenance work BMW Pre-Delivery BMW Running-in Check Check Conducted Conducted Odometer reading Next service at the latest or, if reached sooner, Odometer reading Stamp, Signature Stamp, Signature…

• Page 226
  BMW Service BMW Service BMW Service Conducted Conducted Conducted Odometer reading Odometer reading Odometer reading Next service Next service Next service at the latest at the latest at the latest or, if reached sooner, or, if reached sooner, or, if reached sooner,…
• Page 227
  BMW Service BMW Service BMW Service Conducted Conducted Conducted Odometer reading Odometer reading Odometer reading Next service Next service Next service at the latest at the latest at the latest or, if reached sooner, or, if reached sooner, or, if reached sooner,…
• Page 228
  BMW Service BMW Service BMW Service Conducted Conducted Conducted Odometer reading Odometer reading Odometer reading Next service Next service Next service at the latest at the latest at the latest or, if reached sooner, or, if reached sooner, or, if reached sooner,…
• Page 229
  BMW Service BMW Service BMW Service Conducted Conducted Conducted Odometer reading Odometer reading Odometer reading Next service Next service Next service at the latest at the latest at the latest or, if reached sooner, or, if reached sooner, or, if reached sooner,…

• Page 230: Confirmation Of Service

  Confirmation of service The table is intended as proof of maintenance and repair work, the installed optional accessories and any special campaign (recall) work carried out. Work carried out Odometer Date reading…

• Page 231
  Work carried out Odometer Date reading…

• Page 233: Appendix

  Appendix Certificate for Electronic Immobi- lizer ……. . 232…

• Page 234: Immobilizer

  FCC Approval This device complies with Any changes or modifi- Part 15 of the FCC rules. cations not expressly Ring aerial in the Operation is subject to the approved by the party ignition switch following two conditions: responsible for compliance (1) This device may not could void the user’s cause harmful inter-…

• Page 235
  Approbation de informations avec la clé de Toute modification contact via l’antenne qui n’aurait pas été la FCC annulaire. approuvée expressément Antenne annulaire Le présent dispositif est par l’organisme responsa- conforme à la partie 15 ble de l’homologation peut présente dans le des règles de la FCC.

• Page 236: Index

  Bulbs Abbreviations and symbols, 6 Battery Replace taillight, 182 Charging, 187 Replacing front and rear turn Control, 16 Connect to vehicle, 187 indicator light sources, 180 Operating, 50 Disconnect from vehicle, 186 Replacing high-beam headlight Self-diagnosis, 83 Installing, 188 light source, 176 Technology in detail, 142 Maintenance instructions, 185 Replacing light source for left-…

• Page 237
  Clutch Engine Adjusting play, 166 Adjusting, 75 Engine electronics warning Check play, 166 Technology in detail, 144 light, 29 Checking operation, 165 Dimensions Parking, 41 Technical Data, 213 Technical Data, 207 Starting, 82 Coding plug Technical Data, 206 Adjusting control, 127 Installing, 56 Warning light for engine Control, 16…
• Page 238
  Front wheel stand Heated handlebar grips Lap-Timer Mounting, 157 Control, 18 Clear recording, 108 Fuel Operating, 60 Refueling, 90 Deleting lap, 108 Helmet holder Technical data, 204 Display structure, 121 Position on vehicle, 19 Technical Data, 204 End time entry, 101 Securing helmet, 63 Fuel reserve Fastest lap expected, 102…
• Page 239
  Operating parking lights, 42 Multifunction display, 20 Onboard tool kit Control, 16 Parking lights, 42 Contents, 156 Display for racing mode, 96 Luggage Position on vehicle, 19 Exiting settings, 116 Loading information, 80 Overview of warning Luggage loops LAPTIMER Operating, 98 indicators, 25 Position on vehicle, 19 Overview, 23…
• Page 240
  Seats Steering damper Racetrack Installing, 61 Adjusting, 67 Display for racing mode, 95 Locking mechanism, 11, 13 Position on vehicle, 15 LAPTIMER Operating, 98 Removing, 61 Steering lock Race start with Launch Service, 217 Locking, 40 Control, 128 Reporting safety defects, 216 Suspension Speed limiter for pit lane, 130 Service display, 37…
• Page 241
  Standards, 7 Turn indicators Overheating, 29 Control, 16 Suspension, 209 Overview, 22 Operating, 43 Transmission, 207 Taillight and lights for parking Removing/installing, 134 lights defective, 31 Weights, 213 Type plate Weights Wheels and tires, 210 Position on vehicle, 15 Load capacity table, 11, 13 Tires Breaking in, 86 Technical Data, 213…
• Page 243
  Errors and omissions excepted. © 2015 Bayerische Motoren Werke Aktiengesellschaft 80788 Munich, Germany Reprints and duplication of this work, in whole or part, are pro- hibited without the express writ- ten approval of BMW Motorrad, Aftersales.
• Page 244
  36.3 psi (2.5 bar), with tire cold Tire pressure, rear 42.1 psi (2.9 bar), with tire cold You’ll find additional information on all aspects of your motorcycle at: bmw­motorrad.com BMW recommends *01418565387* Order No.: 01 41 8 565 387 08.2015, 2nd edition, 07…

BMW Motorrad

Rider’s manual

Welcome to BMW

We congratulate you on your choice of a vehicle from

BMW Motorrad and welcome you to the community of BMW riders. Familiarise yourself with your new vehicle so that you can ride it safely and confidently in all traffic situations.

About this Rider’s Manual

Please read this Rider’s Manual carefully before starting to use your new BMW. It contains important information on how to operate the controls and how to make the best possible use of all your BMW’s technical features. In addition, it contains information on maintenance and care to help you maintain your vehicle’s reliability and safety, as well as its value.

This record of the maintenance work you have had performed on

your vehicle is a precondition for generous treatment of goodwill claims.

If the time comes to sell your BMW, please remember to hand over this Rider’s Manual to the new owner. It is an important part of the vehicle.

Suggestions and criticism

If you have questions concerning your vehicle, your authorised BMW Motorrad dealer will gladly provide advice and assistance.

We hope you will enjoy riding your BMW and that all your journeys will be pleasant and safe

BMW Motorrad.

01 40 9 899 561

*01409899561*

*01409899561*

Table of Contents

1 General instructions …. 5

Overview . . . . . . . . . . . . . . . . . . . . . 6 Abbreviations and

symbols . . . . . . . . . . . . . . . . . . . . . . 6 Equipment . . . . . . . . . . . . . . . . . . . 7 Technical data . . . . . . . . . . . . . . . 7 Currentness . . . . . . . . . . . . . . . . . . 8 Additional sources of information . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Certificates and operating licences . . . . . . . . . . . . . . . . . . . . . . . 8 Data memory. . . . . . . . . . . . . . . . . 8 Intelligent emergency call system . . . . . . . . . . . . . . . . . . . . . . 12

2 General views ……….. 17

General view, left side . . . . . . . 19 General view, right side . . . . . 21 Underneath the seat . . . . . . . . 22 Multifunction switch, left . . . . 23 Multifunction switch,

right . . . . . . . . . . . . . . . . . . . . . . . . . 24 Instrument panel . . . . . . . . . . . . 25

3 Status indicators ……. 27

Indicator and warning

lights . . . . . . . . . . . . . . . . . . . . . . . . 28 TFT display in Pure Ride

view . . . . . . . . . . . . . . . . . . . . . . . . . 29 TFT display in view

menu . . . . . . . . . . . . . . . . . . . . . . . . 31 Warnings . . . . . . . . . . . . . . . . . . . . 32

4 Operation……………. 59

Ignition switch/steering

lock . . . . . . . . . . . . . . . . . . . . . . . . . 60 Emergency off switch (kill switch) . . . . . . . . . . . . . . . . . . . . . . 61 Intelligent emergency

call . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Lights . . . . . . . . . . . . . . . . . . . . . . . 64 Hazard warning lights sys-

tem . . . . . . . . . . . . . . . . . . . . . . . . . 66 Turn indicators . . . . . . . . . . . . . . 66 Dynamic Traction Control

(DTC) . . . . . . . . . . . . . . . . . . . . . . . 67 Riding mode . . . . . . . . . . . . . . . . 68 Cruise-control system . . . . . . . 70 Hill Start Control . . . . . . . . . . . . 73

Gearshift light . . . . . . . . . . . . . . . 76 Anti-theft alarm (DWA) . . . . . . 76 Tyre pressure monitoring

(RDC) . . . . . . . . . . . . . . . . . . . . . . . 78 Heated handlebar grips . . . . . 78 On-board computer . . . . . . . . . 79 Front and rear seats. . . . . . . . . 79

5 TFT display …………. 83

General instructions . . . . . . . . . 84 Principle . . . . . . . . . . . . . . . . . . . . . 85 Pure Ride view . . . . . . . . . . . . . . 91 General settings . . . . . . . . . . . . . 92 Bluetooth. . . . . . . . . . . . . . . . . . . . 93 My vehicle . . . . . . . . . . . . . . . . . . 97 Navigation . . . . . . . . . . . . . . . . . 100 Media . . . . . . . . . . . . . . . . . . . . . 102 Phone . . . . . . . . . . . . . . . . . . . . . 102 Display software

version . . . . . . . . . . . . . . . . . . . . 103 Display licence informa-

tion . . . . . . . . . . . . . . . . . . . . . . . . 103

6 Adjustment ………… 105

Mirrors . . . . . . . . . . . . . . . . . . . . 106 Headlight . . . . . . . . . . . . . . . . . . 106 Brakes . . . . . . . . . . . . . . . . . . . . 106 Adjust the clutch lever . . . . 107 Steering . . . . . . . . . . . . . . . . . . . 107 Spring preload . . . . . . . . . . . . 108 Damping . . . . . . . . . . . . . . . . . . 111 Riding height . . . . . . . . . . . . . . 114 Swinging arm . . . . . . . . . . . . . 116 DDC calibration . . . . . . . . . . . 118

7 Riding ……………… 119

Safety information . . . . . . . . . 120 Comply with checklist . . . . . 121 Always before riding

off: . . . . . . . . . . . . . . . . . . . . . . . . 121 At every third refuelling

stop . . . . . . . . . . . . . . . . . . . . . . . 122 Starting. . . . . . . . . . . . . . . . . . . . 122 Running in . . . . . . . . . . . . . . . . 124 Shifting gear . . . . . . . . . . . . . . 125 Gearshift light . . . . . . . . . . . . . 126 Brakes . . . . . . . . . . . . . . . . . . . . 127 Parking your motor-

cycle . . . . . . . . . . . . . . . . . . . . . . 129

Refuelling . . . . . . . . . . . . . . . . . 129 Securing motorcycle for transportation . . . . . . . . . . . . . 131

8 On the race track ….. 135

Displays for racing. . . . . . . . . 136 LAPTIMER . . . . . . . . . . . . . . . . 139 Vehicle settings for ra-

cing . . . . . . . . . . . . . . . . . . . . . . . 140 RACE PRO riding

modes . . . . . . . . . . . . . . . . . . . . 141 Launch Control . . . . . . . . . . . . 142 Pit Lane Limiter . . . . . . . . . . . 144 DTC . . . . . . . . . . . . . . . . . . . . . . . 145 Chassis and suspension settings for racing . . . . . . . . . 146 Removing and installing

mirrors . . . . . . . . . . . . . . . . . . . . 147 Removing and installing number-plate carrier . . . . . . . 151 Switching off ABS when

riding on the race track . . . 155 Deactivating intelligent emergency call when rid-

ing on the race track . . . . . . 157 Gearshift-pattern

reverser . . . . . . . . . . . . . . . . . . . 158

9 Engineering

details …………….. 161

General instructions . . . . . . . 162 Antilock Brake System

(ABS) . . . . . . . . . . . . . . . . . . . . . . 162 Dynamic Damping Control (DDC) . . . . . . . . . . . . . . . . . . . . . 165 Dynamic Traction Control

(DTC) . . . . . . . . . . . . . . . . . . . . . 166 Riding mode . . . . . . . . . . . . . . 167 Dynamic Brake Control . . . . 169 Tyre pressure control

(RDC) . . . . . . . . . . . . . . . . . . . . . 170 Shift assistant . . . . . . . . . . . . . 172 Hill Start Control . . . . . . . . . . 173

10 Maintenance ……… 175

General instructions . . . . . . . 176 Toolkit. . . . . . . . . . . . . . . . . . . . . 176 Front-wheel stand . . . . . . . . . 177 Rear-wheel stand . . . . . . . . . 178 Engine oil . . . . . . . . . . . . . . . . . 179 Brake system . . . . . . . . . . . . . 181 Clutch . . . . . . . . . . . . . . . . . . . . . 186 Coolant. . . . . . . . . . . . . . . . . . . . 187 Tyres . . . . . . . . . . . . . . . . . . . . . . 188

Rims and tyres . . . . . . . . . . . . 189 Wheels . . . . . . . . . . . . . . . . . . . . 189 Lighting . . . . . . . . . . . . . . . . . . . 197 Body panels . . . . . . . . . . . . . . . 197 Jump-starting . . . . . . . . . . . . . 201 Battery . . . . . . . . . . . . . . . . . . . . 202 Fuses . . . . . . . . . . . . . . . . . . . . . 205 Diagnostic connector . . . . . . 206 Chain . . . . . . . . . . . . . . . . . . . . . . 207

11 Accessories ……… 211

General instructions . . . . . . . 212 Connector for optional accessories . . . . . . . . . . . . . . . . . . 212 M Cover Kit . . . . . . . . . . . . . . . 215

12 Care ……………… 217

Care products . . . . . . . . . . . . . 218 Washing the vehicle . . . . . . . 218 Cleaning easily damaged components . . . . . . . . . . . . . . . 219 Care of paintwork . . . . . . . . . 220 Vehicle preservation . . . . . . . 220 Laying up the motor-

cycle . . . . . . . . . . . . . . . . . . . . . . 220 Restoring motorcycle to

use . . . . . . . . . . . . . . . . . . . . . . . . 221

13 Technical data …… 223

Troubleshooting chart . . . . . 224 Screw connections . . . . . . . . 227 Fuel . . . . . . . . . . . . . . . . . . . . . . . 230 Engine oil . . . . . . . . . . . . . . . . . 231 Engine . . . . . . . . . . . . . . . . . . . . 231 Clutch . . . . . . . . . . . . . . . . . . . . . 233 Transmission . . . . . . . . . . . . . . 233 Rear-wheel drive . . . . . . . . . . 234 Frame . . . . . . . . . . . . . . . . . . . . . 234 Chassis and

suspension . . . . . . . . . . . . . . . . 235 Brakes . . . . . . . . . . . . . . . . . . . . 236 Wheels and tyres. . . . . . . . . . 237 Electrical system . . . . . . . . . . 239 Dimensions . . . . . . . . . . . . . . . 241 Weights . . . . . . . . . . . . . . . . . . . 241 Riding specifications . . . . . . 242

14 Service …………… 243

BMW Motorrad Service . . . 244 BMW Motorrad Service

history . . . . . . . . . . . . . . . . . . . . . 244 BMW Motorrad mobility services . . . . . . . . . . . . . . . . . . . 245 Maintenance work . . . . . . . . . 245

BMW Service . . . . . . . . . . . . . 245 Maintenance schedule . . . . 249 Maintenance confirma-

tions . . . . . . . . . . . . . . . . . . . . . . . 250 Service confirmations . . . . . 264

15 Appendix…………. 267

Certificate for electronic immobiliser . . . . . . . . . . . . . . . . 268 Certificate for tyre pressure control (RDC) . . . . . . . . . . . . . 270 Certificate for TFT instru-

ment cluster . . . . . . . . . . . . . . . 271

16 Index …………….. 274

General instructions

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Abbreviations and symbols . . . . . . . . . . 6 Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Technical data . . . . . . . . . . . . . . . . . . . . . . . 7 Currentness . . . . . . . . . . . . . . . . . . . . . . . . . 8 Additional sources of information . . . . 8

Certificates and operating

licences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Data memory . . . . . . . . . . . . . . . . . . . . . . . . 8

Intelligent emergency call

system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

General views

General view, left side. . . . . . . . . . . . . . . 19 General view, right side . . . . . . . . . . . . . 21 Underneath the seat . . . . . . . . . . . . . . . . 22 Multifunction switch, left . . . . . . . . . . . . 23 Multifunction switch, right . . . . . . . . . . . 24 Instrument panel . . . . . . . . . . . . . . . . . . . . 25

General view, right side

1Brake-fluid reservoir, rear ( 185)

2Vehicle identification number (on the steering-head bearing)

Type plate (on the steering-head bearing)

3Brake-fluid reservoir, front ( 184)

4Check coolant level ( 187)

5Engine oil level indicator ( 179)

6Oil filler opening ( 181)

Underneath the seat

1Battery ( 202)

2Rider’s manual

3Toolkit ( 176)

4Diagnostic connector ( 206)

5Fuses ( 205)

Multifunction switch, left

1DTC Switching off ( 67)

2High-beam headlight and headlight flasher ( 65)

3with cruise controlOE Switching on cruise control ( 70).

4Hazard warning lights system ( 66)

5with riding modes ProOE DTC Adapting ( 145).

6Turn indicators ( 66)

7Horn

8Multi-Controller Controls ( 85)

9MENU rocker switch ( 85)

Multifunction switch, right

1 with heated gripsOE Heated handlebar grips ( 78).

2Riding mode ( 68)

3Emergency off switch (kill switch) ( 61)

4Starter button Starting the engine ( 122).

Race start with Launch Control ( 142)

5SOS button

Intelligent emergency call ( 62)

Instrument panel

1Indicator and warning lights ( 28)

2Gearshift light ( 126)

5Photosensor (for adapting the brightness of the instrument lighting)

Status indicators

Indicator and warning lights . . . . . . . . . 28 TFT display in Pure Ride view . . . . . . 29 TFT display in view menu . . . . . . . . . . 31 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Indicator and warning lights

1Turn indicators, left Operating the turn indicators ( 66).

2High-beam ( 65)

3General warning light ( 32)

4Turn indicators, right

5— with export to EU marketsNV

Malfunction indicator lamp

6DTC ( 52)

7ABS ( 155)

TFT display in

Pure Ride view

1Hill Start Control ( 55)

2Engine speed display ( 91)

3Speedometer

4Driver info. status line ( 89)

5with cruise controlOE Switching on cruise control ( 70).

6RACE PRO riding mode with riding modes ProOE

Configuration for the race track ( 141)

7Switching Speed Limit Info on or off ( 91).

with riding modes ProOE DTC Adapting ( 145).

8Riding mode ( 68)

9Recommendation to upshift ( 92)

10Gear indicator; «N» indicates neutral.

TFT display in view menu

1Hill Start Control ( 55)

2Speedometer

3with cruise controlOE Switching on cruise control ( 70).

4Switching Speed Limit Info on or off ( 91).

with riding modes ProOE DTC Adapting ( 145).

5 RACE PRO riding mode with riding modes ProOE

Configuration for the race track ( 141)

6Riding mode ( 68)

7Driver info. status line ( 89)

8Recommendation to upshift ( 92)

9Gear indicator; «N» indicates neutral.

10Clock

11Connection status