Мануал mazda cx 5 2017

1. Manuals
2. Brands
3. Mazda Manuals
4. Automobile
5. CX-5 2017
6. Manual

• Page 1
  CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 2
  CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 3
  HIROSHIMA, JAPAN Important Notes About This Manual Keep this manual in the glove compartment as a handy reference for the safe and enjoyable use of your Mazda. Should you resell the vehicle, leave this manual with it for the next owner.

• Page 4: How To Use This Manual

  Mazda. By reading your manual, you can part. find out about the features, important Please refer to the manual for a detailed safety information, and driving under explanation.

• Page 5: Table Of Contents

  Table of Contents Pictorial Index Interior, exterior views and part identification of your Mazda. Essential Safety Equipment Important information about safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Before Driving Use of various features, including keys, doors, mirrors and windows.

• Page 6
  CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 7
  Pictorial Index Interior, exterior views and part identification of your Mazda. Interior Overview……1-2 Exterior Overview……1-7 Interior Equipment (View A)..1-2 Front……….1-7 Interior Equipment (View B)..1-3 Rear……….1-8 Interior Equipment (View C)..1-4 Interior Equipment (View D)..1-5 Interior Equipment (View E)..1-6…
• Page 8
  Pictorial Index Interior Overview Interior Equipment (View A) ① Lighting control…………………page 4-53 ② Turn and lane-change signal………………page 4-59 ③ Audio control switches………………page 5-15 ④ INFO switch………………..page 4-19, 4-21 ⑤ Cruise control switches…………….page 4-121, 4-160 ⑥ Wiper and washer lever………………page 4-60 ⑦…
• Page 9
  Pictorial Index Interior Overview Interior Equipment (View B) ① Active driving display………………. page 4-30 ② Instrument cluster………………..page 4-12 ③ Dashboard illumination knob…………….page 4-17 ④ Seat warmer switches………………..page 2-6 ⑤ Heated steering wheel switch…………….page 3-36 ⑥ Hazard warning flasher switch…………….page 4-67 ⑦…
• Page 10
  Pictorial Index Interior Overview Interior Equipment (View C) ① Head restraint………………….page 2-16 ② Seat belt…………………….page 2-18 ③ Bottle holder………………….. page 5-137 ④ Overhead lights………………..page 5-132 ⑤ Overhead console………………..page 5-138 ⑥ Moonroof switch………………..page 3-43 ⑦ Vanity mirror…………………. page 5-131 ⑧…
• Page 11
  Pictorial Index Interior Overview Interior Equipment (View D) ① Seat belt……………………. page 2-18 ② Lever………………….page 2-9, 2-13 ③ Head restraint………………….page 2-16 ④ USB power outlet………………..page 5-135 ⑤ Child safety locks………………..page 3-19 ⑥ Armrest box………………….page 5-139 ⑦…
• Page 12
  Pictorial Index Interior Overview Interior Equipment (View E) ① Remote handles………………….. page 2-9 ② Anchor brackets………………..page 2-36 ③ Accessory socket………………..page 5-134 ④ Cargo Securing Loops………………page 5-140 The equipment and installation position varies by vehicle CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 13
  Pictorial Index Exterior Overview Front ① Windshield wiper blades………………page 6-35 ② Moonroof…………………..page 3-43 ③ Window……………………. page 3-40 ④ Fuel-filler lid………………….page 3-34 ⑤ Request switch ………………… page 3-13 ⑥ Door……………………page 3-11 The equipment and installation position varies by vehicle CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 14
  Pictorial Index Exterior Overview Rear ① Rear window wiper blade………………page 6-38 ② Liftgate……………………page 3-20 ③ Outside mirror………………….. page 3-37 ④ Request switch ………………… page 3-13 ⑤ Electric liftgate opener………………page 3-21 The equipment and installation position varies by vehicle CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 15: Table Of Contents

  Essential Safety Equipment Important information about safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Seats………… 2-2 SRS Air Bags……..2-48 Seat Precautions……2-2 Supplemental Restraint System Front Seat……..2-5 (SRS) Precautions…….2-48 Rear Seat……..2-9 Supplemental Restraint System Head Restraints……2-16 Components……..2-55 How the SRS Air Bags Work..

• Page 16: Seats

  The front seats contain air bag components essential to the supplemental restraint system. Such modifications could damage the supplemental restraint system and result in serious injury. Consult an Authorized Mazda Dealer if there is any need to remove or reinstall the front seats.

• Page 17: Before Driving

  Essential Safety Equipment Seats Do not drive with either front seats reclined: Sitting in a reclined position while the vehicle is moving is dangerous because you do not get the full protection from seat belts. During sudden braking or a collision, you can slide under the lap belt and suffer serious internal injuries.

• Page 18
  Essential Safety Equipment Seats (Manual Seat) When moving the seats forward and rearward or returning a rear-reclined seatback to its upright position, make sure you hold onto the seatback with your hand while operating. If the seatback is not held, the seat will move suddenly and could cause injury. NOTE When returning a rear seat to its original position, place the seat belt in its normal •…

• Page 19: Front Seat

  Essential Safety Equipment Seats Front Seat ▼ Seat Operation Power operation Seat Slide (Manual Seat) To move a seat forward or backward, raise the lever and slide the seat to the desired position and release the lever. Make sure the lever returns to its original position and the seat is locked in place by attempting to push it forward and backward.

• Page 20
  Essential Safety Equipment Seats Seat Recline (Manual Seat) To change the seatback angle, lean forward slightly while raising the lever. Then lean back to the desired position and release the lever. Make sure the lever returns to its original position and the seatback is locked in place by attempting to push it forward and backward.
• Page 21
  Essential Safety Equipment Seats Driver’s seat position (seat slide, height Do not use the seat warmer even when • adjustment, front edge of seat bottom, taking a short nap in the vehicle: seat recline) The seat may be heated excessively and Refer to Seat Operation on page 2-5.
• Page 22
  Essential Safety Equipment Seats If the vehicle has been serviced and the 4. Press the programming button for the • battery cables disconnected, the driving position you want to call up programmed seat positions will have (button 1 or 2). been erased.

• Page 23: Rear Seat

  Essential Safety Equipment Seats NOTE Rear Seat If there is no driving position movement, • ▼ Split Folding a beep is not heard. The driving position adjustment is By lowering the rear seatbacks the luggage • canceled in the following cases: compartment space can be expanded.

• Page 24
  Essential Safety Equipment Seats NOTE Make sure there is nobody in the rear seat When you fold down the left seatback, the area before operating (pulling) the remote center seatback folds down at the same handle: time. Not checking the rear seat area for persons before folding the seatbacks with the strap/ Using remote handle remote handle is dangerous.
• Page 25
  Essential Safety Equipment Seats (Folding the left seatback) Folding only center seatback Be careful when operating the remote Using remote handle handle with the center seatback folded 1. (With rear seat warmer) down. If a person sitting in the right rear Turn the rear seat warmer switch off.
• Page 26
  Essential Safety Equipment Seats Using strap Make sure there is nobody in the rear seat 1. (With rear seat warmer) area before operating (pulling) the remote Turn the rear seat warmer switch off. handle: Refer to Seat Warmer on page 2-14. Not checking the rear seat area for persons 2.
• Page 27
  Essential Safety Equipment Seats ▼ Rear Seat Recline When returning the seatback to its upright position, make sure that it is firmly locked and the red indication is not visible: WARNING If the red indication is visible, the seatback is not locked. If the vehicle is driven without After adjusting the seatback, make sure the seatback locked, it could fold down that it is firmly locked and the red…
• Page 28
  Essential Safety Equipment Seats NOTE WARNING When you adjust the left seatback, the center seatback moves at the same time. Be careful when using the seat warmer: The left and right seatbacks of the rear seat The heat from the seat warmer may be too can be adjusted separately.
• Page 29
  Essential Safety Equipment Seats ▼ Armrest CAUTION The rear armrest in the center of the rear Before folding a rear seatback, make sure seatback can be used (no occupant in the that the rear seat warmer switch is off. If center seat) or placed upright.

• Page 30: Head Restraints

  Essential Safety Equipment Seats Front outboard seat Head Restraints Your vehicle is equipped with head restraints on all outboard seats and the rear center seat. The head restraints are intended to help protect you and the passengers from neck injury. WARNING Always drive with the head restraints Rear outboard seat…

• Page 31
  Essential Safety Equipment Seats Rear center seat CAUTION When installing a head restraint, make sure that it is installed correctly with the front of the head restraint facing forward. If the head restraint is installed incorrectly, it could detach from the seat during a collision and result in injury.

• Page 32: Seat Belt Systems

  Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts. (Except Mexico) All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use.

• Page 33
  Using a damaged seat belt is dangerous. An accident could damage the belt webbing of the seat belt in use. A damaged seat belt cannot provide adequate protection in a collision. Have an Authorized Mazda Dealer inspect all seat belt systems in use during an accident before they are used again.
• Page 34
  Essential Safety Equipment Seat Belt Systems ▼ Pregnant Women and Persons with Serious Medical Conditions Pregnant women should always wear seat belts. Ask your doctor for specific recommendations. The lap belt should be worn SNUGLY AND AS LOW AS POSSIBLE OVER THE HIPS. The shoulder belt should be worn across your shoulder properly, but never across the stomach area.

• Page 35: Seat Belt

  If a belt does not fully retract, inspect it for kinks and twists. If it is still not retracting properly, have it inspected at an Authorized Mazda Dealer. Take up Keep low slack ▼ Front Shoulder Belt Adjuster…

• Page 36: Seat Belt Warning Systems

  Essential Safety Equipment Seat Belt Systems Seat Belt Warning Systems Front Seat Belt Pretensioner and Load If it detects that the occupant seat belt is unfastened, the warning light or beep Limiting Systems alerts the occupant. For optimum protection, the driver and Refer to Warning/Indicator Lights on page front passenger seat belts are equipped 4-33.

• Page 37
  In addition, the pretensioner system for the expended: front passenger, like the front and side Always have an Authorized Mazda Dealer passenger air bag, is designed to only immediately inspect the seat belt deploy when the front passenger occupant…

• Page 38: Seat Belt Extender

  If residue from the Please contact your Authorized Mazda deployment of the air bags or the front Dealer for more information. pretensioner system gets on the skin or…

• Page 39
  If you system will determine that the driver (or sell your Mazda, do not leave your seat belt front passenger) is wearing the seat belt extender in the vehicle. It could be used…

• Page 40: Child Restraint

  Even if the front passenger air bag is shut off, Mazda strongly recommends that children be properly restrained and child-restraint systems of all kinds are properly secured on the rear seats which are the best place for children.

• Page 41
  Essential Safety Equipment Child Restraint WARNING Use the correct size child-restraint system: For effective protection in vehicle accidents and sudden stops, a child must be properly restrained using a seat belt or child-restraint system depending on age and size. If not, the child could be seriously injured or even killed in an accident.
• Page 42
  Essential Safety Equipment Child Restraint (Except Mexico) Vehicles with a front passenger air bag have the following warning label. The warning label reminds you not to put a rear-facing child-restraint system on the front passenger seat at any time. (Mexico) NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.
• Page 43
  Essential Safety Equipment Child Restraint Seating a child in a child-restraint system on the front passenger seat is dangerous under certain conditions (With Front Passenger Occupant Classification System): Your vehicle is equipped with front passenger occupant classification sensor. Even with the front passenger occupant classification sensor, if you must use the front passenger seat to seat a child, using a child-restraint system on the front passenger seat under the following conditions increases the danger of the front passenger air bag deploying and could result in…
• Page 44
  To avoid burning yourself or a child, check them before you or your child touches them. NOTE Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems on the rear seats. When using these anchors to secure a child-restraint system, refer to «Using LATCH Lower Anchor» (page 2-44).

• Page 45: Child-Restraint System Installation

  Essential Safety Equipment Child Restraint Child-Restraint System Installation ▼ Categories of Child-Restraint Systems NOTE When purchasing, ask the manufacturer of the child-restraint system which type of child-restraint system is appropriate for your child and vehicle. (Mexico) Child-restraint systems are classified into the following 5 groups according to the UNECE 44 regulation.

• Page 46
  Essential Safety Equipment Child Restraint Infant seat Booster seat An infant seat provides restraint by A booster seat is a child restraint bracing the infant’s head, neck and back accessory designed to improve the fit of against the seating surface. the seat belt system around the child’s Equal to Group 0 and 0 of the UNECE body.
• Page 47
  Essential Safety Equipment Child Restraint Child-Restraint System Suitability for Various Seat Positions Table (Mexico) Provided information in the table shows your child-restraint system suitability for various seating position. For installation suitability of other manufacturer child-restraint system, carefully consult the manufacturer’s instructions which accompany the child-restraint system.
• Page 48
  IL = suitable for particular LATCH child-restraint systems (CRS). These LATCH CRS are those of the “specific vehicle”, “restricted” or “semi-universal” categories. A Mazda genuine child-restraint system can be installed. Regarding child-restraint systems which can be installed, refer to the accessories catalog.
• Page 49
  Key of letters to be inserted in the above table: U = Suitable for “universal” category restraints approved for use in this mass group. L = A Mazda genuine child-restraint system can be installed. Regarding child-restraint systems which can be installed, refer to the accessories catalog.

• Page 50: Installing Child-Restraint Systems

  Always follow the installed on the seats that take tethers to be instruction manual accompanying the effective. In your Mazda, tethered child-restraint system. child-restraint systems can only be accommodated in the three positions on Anchor bracket location the rear seat.

• Page 51
  Essential Safety Equipment Child Restraint Always install the head restraint and adjust WARNING it to the appropriate position after removing the child-restraint system: Always attach the tether strap to the Driving with the head restraint removed is correct tether anchor position: dangerous as impact to the occupant’s Attaching the tether strap to the incorrect head cannot be prevented during…
• Page 52
  Essential Safety Equipment Child Restraint 5. To get the retractor into the automatic ▼ Using Automatic Locking Mode locking mode, pull the shoulder belt Follow these instructions when using a portion of the seat belt until the entire child-restraint system, unless you are length of the belt is out of the retractor.
• Page 53
  Essential Safety Equipment Child Restraint NOTE Always remove the head restraint and install child-restraint system (except when Inspect this function before each use • installing a backless booster seat): of the child-restraint system. You Installing a child-restraint system without should not be able to pull the removing the head restraint is dangerous.
• Page 54
  Essential Safety Equipment Child Restraint ▼ If You Must Use the Front Seat for Always install the head restraint and adjust Children it to the appropriate position after removing the child-restraint system: If you cannot put all children in the rear Driving with the head restraint removed is seat, at least put the smallest children in dangerous as impact to the occupant’s…
• Page 55
  • that could deploy: bags: Rear-facing child-restraint systems on the Mazda vehicles equipped with side air front seat are particularly dangerous. bag will have a «SRS AIRBAG» tag on Even in a moderate collision, the the outboard shoulder of the front seats.
• Page 56
  Essential Safety Equipment Child Restraint 4. Place the child-restraint system on the Always remove the head restraint and seat without putting your weight on the install child-restraint system (except when seat and fasten the seat belt. See the installing a backless booster seat): manufacturer’s instructions on the Installing a child-restraint system without child-restraint system for belt routing…
• Page 57
  If the indicator light does not illuminate after seating a child in a child-restraint system on the front passenger seat, seat a child in a child-restraint system on the rear seat and consult an Authorized Mazda Dealer as soon as possible. 2-43 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 58
  Child Restraint ▼ Using LATCH Lower Anchor Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seats. Both anchors must be used, otherwise the seat will bounce around and put the child in danger. Most LATCH child-restraint systems must also be used in conjunction with a tether to be effective.
• Page 59
  Essential Safety Equipment Child Restraint Installation on rear outboard seats 6. Secure the child-restraint system using BOTH LATCH lower anchors, 1. First, adjust the front seat to allow following the child-restraint system clearance between the child-restraint manufacturer’s instruction. Pull on the system and the front seat (page 2-5).
• Page 60
  Essential Safety Equipment Child Restraint Installation on rear center seat Always attach the tether strap to the correct tether anchor position: The LATCH lower anchors at the center of Attaching the tether strap to the incorrect the rear seat are much further apart than tether anchor position is dangerous.
• Page 61
  Essential Safety Equipment Child Restraint LATCH lower anchor location Always install the head restraint and adjust it to the appropriate position after removing the child-restraint system: Driving with the head restraint removed is dangerous as impact to the occupant’s head cannot be prevented during emergency braking or in a collision, which could result in a serious accident, injury or death.

• Page 62: Srs Air Bags

  Essential Safety Equipment SRS Air Bags Supplemental Restraint System (SRS) Precautions The front and side supplemental restraint systems (SRS) include different types of air bags. Please verify the different types of air bags which are equipped on your vehicle by locating the “SRS AIRBAG”…

• Page 63
  Essential Safety Equipment SRS Air Bags If your vehicle is also equipped with a front passenger occupant classification system, refer to the Front Passenger Occupant Classification System (page 2-64) for details. If your vehicle is equipped with a front passenger occupant classification system, the front passenger air bag deactivation indicator light illuminates for a specified time after the ignition is switched ON.
• Page 64
  Essential Safety Equipment SRS Air Bags WARNING Seat belts must be worn in air bag equipped vehicles: Depending only on the air bags for protection during an accident is dangerous. Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected to inflate only in the first accident, such as frontal, near frontal or side collisions or roll-over accidents that are at least moderate.
• Page 65
  Essential Safety Equipment SRS Air Bags Sit in the center of the seat and wear seat belts properly: Sitting too close to the side air bag modules or placing hands on them, or sleeping up against the door or hanging out the windows is extremely dangerous. The side and curtain air bags inflate with great force and speed directly expanding along the door on the side the car is hit.
• Page 66
  Do not use tires or wheels other than those specified for your Mazda: Use of any tire or wheel other than those specified for your Mazda (page 9-9) is dangerous. Use of such wheels will prevent the vehicle’s accident detections system from accurately detecting a collision or roll-over accident resulting in incorrect or unexpected air bag deployment and the possibility of serious injuries.
• Page 67
  Only a trained Authorized Mazda Dealer can fully evaluate these systems to see that they will work in any subsequent accident. Driving with an expended or damaged air bag or pretensioner unit will not afford you the necessary protection in the event of any subsequent accident which could result in serious injury or death.
• Page 68
  Neither is likely to cause injury, however, the texture of the air bags may cause light skin injuries on body parts not covered with clothing through friction. Should you sell your Mazda, we urge you to tell the new owner of its air bag systems and •…

• Page 69: Supplemental Restraint System Components

  Essential Safety Equipment SRS Air Bags Supplemental Restraint System Components (With Front Passenger Occupant Classification System) (Without Front Passenger Occupant Classification System) 2-55 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 70
  Essential Safety Equipment SRS Air Bags Driver/Front passenger inflators and air bags Roll-over sensor , crash sensors, and diagnostic module (SAS unit) Seat belt pretensioners (page 2-22) Front air bag sensors Side crash sensors Air bag/front seat belt pretensioner system warning light (page 4-34) Side and curtain inflators and air bags Front passenger air bag deactivation indicator light (page 2-64)

• Page 71: How The Srs Air Bags Work

  SRS Air Bags How the SRS Air Bags Work Your Mazda is equipped with the following types of SRS air bags. SRS air bags are designed to work together with the seat belts to help to reduce injuries during an accident.

• Page 72
  Essential Safety Equipment SRS Air Bags ▼ Front Passenger Air Bag The front passenger air bag is mounted in the front passenger dashboard. The inflation mechanism for the front passenger air bag is the same as the driver’s air bag. For more details about air bag deployment, refer to «SRS Air Bag Deployment Criteria»…
• Page 73
  Essential Safety Equipment SRS Air Bags ▼ Curtain Air Bags The curtain air bags are mounted in the front and rear window pillars, and the roof edge along both sides. When the air bag crash sensors detect a side impact of greater than moderate force, the curtain air bag inflates quickly and helps to reduce injury mainly to the rear outboard passenger’s head caused by directly hitting interior parts such as a door or window.
• Page 74
  Essential Safety Equipment SRS Air Bags ▼ Warning Light/Beep A system malfunction or operation conditions are indicated by a warning. Refer to Warning/Indicator Lights on page 4-33. Refer to Warning Sound is Activated on page 7-44. 2-60 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 75: Srs Air Bag Deployment Criteria

  Essential Safety Equipment SRS Air Bags SRS Air Bag Deployment Criteria This chart indicates the applicable SRS equipment that will deploy depending on the type of collision. (The illustrations are the representative cases of collisions.) Types of collision A severe frontal/near frontal colli- A severe side colli- A roll-over/near A rear collision…

• Page 76: Limitations To Srs Air Bag

  Essential Safety Equipment SRS Air Bags Limitations to SRS Air Bag In severe collisions such as those described previously in «SRS Air Bag Deployment Criteria», the applicable SRS air bag equipment will deploy. However, in some accidents, the equipment may not deploy depending on the type of collision and its severity. Limitations to front/near front collision detection: The following illustrations are examples of front/near front collisions that may not be detected as severe enough to deploy the SRS air bag equipment.

• Page 77
  Essential Safety Equipment SRS Air Bags Limitations to side collision detection: The following illustrations are examples of side collisions that may not be detected as severe enough to deploy the SRS air bag equipment. Side impacts involving trees or poles Side impacts with two-wheeled vehicles Roll-over (Without Front Passenger Occupant Classification System) (With Front Passenger Occupant Classification System)

• Page 78: Front Passenger Occupant Classification System *

  Essential Safety Equipment SRS Air Bags Front Passenger Occupant Classification System First, please read «Supplemental Restraint System (SRS) Precautions» (page 2-48) carefully. ▼ Front Passenger Occupant Classification Sensor Your vehicle is equipped with a front passenger occupant classification sensor as a part of the supplemental restraint system.

• Page 79
  ON and does not turn on as indicated in the front passenger air bag deactivation indicator light on/off condition chart, do not allow an occupant to sit in the front passenger seat and consult an Authorized Mazda Dealer as soon as possible. The system may not work properly in an accident.
• Page 80
  Essential Safety Equipment SRS Air Bags A front passenger is seated as shown in the following figure: A rear passenger pushes up on the front passenger seat with their feet. Luggage or other items placed under the front passenger seat or between the front passenger seat and driver seat that push up the front passenger seat bottom.
• Page 81
  Authorized Mazda Dealer as soon as possible. If the front passenger air bag deactivation indicator light turns on when an occupant is •…

• Page 82: Constant Monitoring

  Essential Safety Equipment SRS Air Bags Constant Monitoring The following components of the air bag systems are monitored by a diagnostic system: Front air bag sensors • Crash sensors, and diagnostic module (SAS unit) • Side crash sensors • Air bag modules •…

• Page 83
  Before Driving Use of various features, including keys, doors, mirrors and windows. Keys………… 3-2 Security System……. 3-46 Keys……….3-2 Modification and Add-On Keyless Entry System….3-3 Equipment……..3-46 Immobilizer System….3-46 Theft-Deterrent System …..3-48 Advanced Keyless Entry System……….3-9 Advanced Keyless Entry System ..Driving Tips……..3-50 …………
• Page 84
  If your key (auxiliary key) is lost, consult conditions: your Authorized Mazda Dealer and have The key is carried with communication your code number ready. devices such as cellular phones.
• Page 85
  For vehicles with the type A instrument cluster, check the displayed message for more information and, if necessary, have the vehicle inspected at an Authorized Mazda Dealer, according to the indication. KEY Warning Light (Red) • Refer to Warning/Indicator Lights on page 4-33.
• Page 86
  Keys Additional keys can be obtained at an CAUTION • Authorized Mazda Dealer. Up to 6 keys can be used with the keyless functions Radio equipment like this is governed by per vehicle. Bring all keys to an laws in the United States.
• Page 87
  Before Driving Keys 2. Open the driver’s door. Lock button 3. Within 30 seconds of opening the To lock the doors and the liftgate, press the driver’s door, press and hold the LOCK lock button and the hazard warning lights button on the key for 5 seconds or will flash once.
• Page 88
  Before Driving Keys Unlock button 4. The setting change is completed by doing any one of the following: To unlock the driver’s door, press the Switching the ignition to ACC or unlock button and the hazard warning • lights will flash twice. Closing the driver’s door.
• Page 89
  Before Driving Keys ▼ Operational Range Power liftgate button To open/close the liftgate, press the power The system operates only when the driver liftgate button for one second or more with is in the vehicle or within operational the liftgate in the fully closed/open range while the key is being carried.
• Page 90
  Before Driving Keys Without the advanced keyless function Interior antenna Operational range NOTE The engine may not start if the key is placed in the following areas: Around the dashboard • In the storage compartments such as the • glove compartment or the center console ▼…
• Page 91
  Consult an Authorized Radio waves from the key may affect medical devices such as pacemakers: Mazda Dealer for details. If the advanced keyless entry system has been deactivated, Before using the key near people who use you can start the engine by following the…
• Page 92
  Before Driving Advanced Keyless Entry System NOTE Operational Range The system may not operate if you are • The system operates only when the driver too close to the windows or door is in the vehicle or within operational handles, or liftgate. range while the key is being carried.

• Page 93: When Driving

  Before Driving Doors and Locks Door Locks After closing the doors and the liftgate, always verify that they are securely closed: Doors and the liftgate not securely closed WARNING are dangerous, if the vehicle is driven with a door and the liftgate not securely closed, the door and the liftgate could open Always take all children and pets with you unexpectedly resulting in an accident.

• Page 94: Doors And Locks

  Before Driving Doors and Locks Around the dashboard (Door unlock (control) system with • • In the storage compartments such as collision detection) • the glove compartment or the center This system automatically unlocks the console doors and the liftgate in the event the Next to a communication device such vehicle is involved in an accident to •…

• Page 95
  Before Driving Doors and Locks ▼ Locking, Unlocking with Request To unlock Switch (With the advanced keyless Driver’s door request switch function) To unlock the driver’s door, press the All doors and the liftgate can be locked/ request switch. A beep sound will be heard unlocked by pressing the request switch on twice and the hazard warning lights will the front doors while the key is being…
• Page 96
  Before Driving Doors and Locks 4. The setting change is completed by 3. Within 30 seconds of opening the doing any one of the following: driver’s door, press and hold the LOCK button on the key for 5 Switching the ignition to ACC or •…
• Page 97
  Before Driving Doors and Locks (Auto-lock function) ▼ Locking, Unlocking with A beep sound is heard when all doors Transmitter and the liftgate are closed while the All doors and the liftgate can be locked/ advanced key is being carried. All doors unlocked by operating the keyless entry and the liftgate are locked automatically system transmitter, refer to Keyless Entry…
• Page 98
  Before Driving Doors and Locks NOTE NOTE When locking the doors this way, be Function number 3 in the following • careful not to leave the key inside the table is the factory setting for your vehicle. vehicle. There are only a total of six auto lock/ ▼…
• Page 99
  Function set (The Other settings for the auto door lock function are number of beeps Press 4 times available at an Authorized Mazda Dealer. For heard is the same as details consult an Authorized Mazda Dealer. Cancel setting the selected function Refer to Personalization Features on page 9-11.
• Page 100
  Before Driving Doors and Locks NOTE ▼ Locking, Unlocking with Door-Lock Knob The doors and the liftgate cannot be • locked or unlocked while the setting Operation from inside function is being performed. To lock any door from the inside, press the The procedure can be cancelled by •…
• Page 101
  Before Driving Doors and Locks Operation from outside ▼ Rear Door Child Safety Locks To lock any door with the door-lock knob These locks are intended to help prevent from the outside, press the door-lock knob children from accidentally opening the to the lock position and close the door rear doors.
• Page 102
  It may affect the side or damper stay. Consult an Authorized rear field of view. Mazda Dealer if a liftgate damper stay is deformed or damaged for reasons such CAUTION as a collision or if there is some other problem.
• Page 103
  Before Driving Doors and Locks ▼ Opening and Closing the Liftgate When the liftgate latch is released by • pressing the electric liftgate opener, the Opening the liftgate with Electric liftgate raises slightly. If the liftgate is liftgate opener not operated for a certain period of time, the liftgate cannot be raised.
• Page 104
  Before Driving Doors and Locks Closing the liftgate ▼ Power Liftgate Lower the liftgate slowly using the liftgate The power liftgate opens/closes grip recess, then push the liftgate closed electrically by operating the switches in using both hands. the vehicle or the buttons on the keyless Do not slam it.
• Page 105
  Before Driving Doors and Locks NOTE Never allow children to operate the power liftgate system: Do not apply unnecessary force to the • Allowing children to operate the power power liftgate when it is opening/closing liftgate switch and the keyless entry system electrically.
• Page 106
  Before Driving Doors and Locks Operation using the transmitter Operation using each switch Press the power liftgate button for one Operation conditions second or more. The hazard warning lights Opening the liftgate flash twice and the liftgate opens/closes If the vehicle has satisfied all the after the beep sounds.
• Page 107
  Before Driving Doors and Locks Operation from the driver’s seat (To Operation from outside (To close) open/close) Press the power liftgate close switch while Press the power liftgate switch for about the liftgate is fully opened. The hazard one second or more while the liftgate is in warning lights flash twice and the liftgate the fully closed/open position.
• Page 108
  Before Driving Doors and Locks Changing the power liftgate fully open WARNING position The power liftgate fully-open position can Always check the area around the power be changed according to the height of a liftgate before opening/closing it: garage. Not checking for occupants and objects When changing the position around the power liftgate before opening/ closing it is dangerous.
• Page 109
  Before Driving Doors and Locks NOTE The jam-safe equipment does not activate during easy closure operation when the power liftgate is between the near-shut position and fully closed position. When the power liftgate is moving in the open/close direction and an obstruction is detected, the beep sound will be heard and the liftgate moves in the reverse direction and stops.
• Page 110
  Never add fuel system additives, otherwise the emission control system could be damaged. Consult an Authorized Mazda Dealer for details. Gasoline blended with oxygenates such as alcohol or ether compounds are generally referred to as oxygenated fuels. The common gasoline blend that can be used with your vehicle is ethanol blended at no more than 10 %.
• Page 111
  B20 or B100. Never add fuel system additives. Otherwise, the emission control system could be damaged. If incorrect fuel was added, do not start the engine and consult an Authorized Mazda Dealer. NOTE Fuel for winter driving is available. Ask the gas station attendant for details.
• Page 112
  Either condition will damage the converter and cause poor performance. USE ONLY UNLEADED FUEL. Do not drive your Mazda with any sign of engine malfunction. Do not coast with the ignition switched off. Do not descend steep grades in gear with the ignition switched off.
• Page 113
  Either condition will damage the converter and cause poor performance. Do not drive your Mazda with any sign of engine malfunction. Do not coast with the ignition switched off. Do not descend steep grades in gear with the ignition switched off.
• Page 114
  For replenishment of the DEF supply, consult an Authorized Mazda Dealer. CAUTION Use a Mazda genuine product or a product conforming to ISO22241-1 for DEF. If incompatible DEF is used, the SCR system may not operate normally. For the recommended DEF, consult the nearest Authorized Mazda Dealer.
• Page 115
  When inhaled, it can cause loss of consciousness and death. If you smell exhaust gas inside the vehicle, keep all windows fully open and contact an Authorized Mazda Dealer immediately. Do not run the engine when inside an enclosed area: Running the engine inside an enclosed area, such as a garage, is dangerous.
• Page 116
  CAUTION (SKYACTIV-G 2.0 and SKYACTIV-G 2.5 for WARNING U.S.A. and Canada) Always use only a genuine Mazda fuel-filler When removing the fuel-filler cap, loosen cap or an approved equivalent, available the cap slightly and wait for any hissing to at an Authorized Mazda Dealer. The wrong…
• Page 117
  Before Driving Fuel and Emission ▼ Fuel-Filler Cap To remove the fuel-filler cap, turn it counterclockwise. Attach the removed cap to the inner side of the fuel lid. To close the fuel-filler cap, turn it clockwise until a click is heard. Open Close CAUTION…

• Page 118: Steering Wheel

  Before Driving Steering Wheel Steering Wheel ▼ Heated Steering Wheel The grips on the left and right of the steering wheel can be warmed up. WARNING Heated steering wheel switch Never adjust the steering wheel while the Heating area vehicle is moving: Adjusting the steering wheel while the vehicle is moving is dangerous.

• Page 119
  Before Driving Mirrors 2. Press the mirror switch in the Mirrors appropriate direction. Before driving, adjust the inside and Center position outside mirrors. ▼ Outside Mirrors WARNING Be sure to look over your shoulder before changing lanes: Changing lanes without taking into Mirror switch account the actual distance of the vehicle After adjusting the mirror, lock the control…

• Page 120: Rearview Mirror

  Before Driving Mirrors ▼ Rearview Mirror Reducing glare from headlights Manual day/night mirror WARNING Push the day/night lever forward for day driving. Pull it back to reduce glare of headlights from vehicles at the rear. Do not stack cargo or objects higher than the seatbacks: Cargo stacked higher than the seatbacks is dangerous.

• Page 121
  Before Driving Mirrors (Without Homelink wireless control (With Homelink wireless control • system) system) The auto-dimming mirror automatically For information regarding the 3 buttons reduces the glare of headlights from ) on the auto-dimming vehicles at the rear when the ignition is mirror.
• Page 122
  Before Driving Windows NOTE Power Windows When driving with only one of the rear The windows can be opened/closed by windows open, your ears might experience a resonating sound. However, this does not operating the power window switches. indicate a problem. The sound can be WARNING reduced by slightly opening a front window or by changing the size of the rear…
• Page 123
  Before Driving Windows ▼ Opening/Closing Windows The window opens while the switch is pressed and it closes while the switch is pulled up with the ignition switched ON. Do not open or close three or more windows at the same time.
• Page 124
  Before Driving Windows ▼ Auto-opening/Closing The power window auto function will only resume on a power window that has been To fully open the window automatically, reset. press the switch completely down, then 1. Switch the ignition ON. release. The window will fully open 2.
• Page 125
  Before leaving the vehicle or washing • child’s hands, head or neck becomes your Mazda, make sure the moonroof is caught by the moonroof. completely closed so that water does not get inside the cabin area.
• Page 126
  Before Driving Windows Tilt Operation When the moonroof is already tilted open and you want to slide it open, first close The rear of the moonroof can be tilted the moonroof and then do a slide open to provide more ventilation. operation.
• Page 127
  Before Driving Windows In the event the jam-safe function • activates and the moonroof cannot be closed automatically, press the tilt/slide switch and the moonroof will close. The jam-safe moonroof function does • not operate until the system has been reset.

• Page 128: Security System

  Immobilizer System Equipment The immobilizer system allows the engine to start only with a key the system Mazda cannot guarantee the immobilizer recognizes. and the theft-deterrent systems’ operation if the system has been modified or if any If someone attempts to start the engine add-on equipment has been installed.

• Page 129
  If a key is lost, consult an Authorized Mazda Dealer as soon as possible. Disarming If you lose a key, an Authorized Mazda • Dealer will reset the electronic codes of The system is disarmed when the ignition your remaining keys and immobilizer is switched ON with the correct system.
• Page 130
  Before Driving Security System NOTE Theft-Deterrent System The liftgate does not open while the • If the theft-deterrent system detects an theft-deterrent system is operating. inappropriate entry into the vehicle, which For vehicles equipped with the power • could result in the vehicle or its contents liftgate, the liftgate can be opened even being stolen, the alarm alerts the while the theft-deterrent system is…
• Page 131
  Before Driving Security System 5. After 20 seconds, the system is fully NOTE When the doors are unlocked by pressing armed. the unlock button on the transmitter while NOTE the theft-deterrent system is turned off, the The theft-deterrent system can also be hazard warning lights will flash twice to •…

• Page 132: Driving Tips

  Environment No special break-in is necessary, but a few precautions in the first 1,000 km (600 How you operate your Mazda determines miles) may add to the performance, how far it will travel on a tank of fuel. Use economy, and life of the vehicle.

• Page 133
  Before Driving Driving Tips Avoid sudden braking and sudden Hazardous Driving • maneuvering. Do not pump the brakes. Continue to • WARNING press down on the brake pedal. Refer to Antilock Brake System (ABS) on page 4-82. Be extremely careful if it is necessary to If you get stuck, select a lower gear and •…
• Page 134
  Floor Mat Rocking the Vehicle We recommend the use of Genuine WARNING Mazda floor mats. WARNING Do not spin the wheels at more than 56 km/h (35 mph), and do not allow anyone Make sure the floor mats are hooked on the…
• Page 135
  Ask an Authorized Mazda Dealer to check times until the brake performance the following: returns to normal. Have the proper ratio of antifreeze in the ▼…
• Page 136
  Using tires different in size or type is Install the chains on the front tires only. dangerous. Your vehicle’s handling could Do not use chains on the rear tires. be greatly affected and result in an Please consult an Authorized Mazda accident. Dealer. CAUTION Installing the chains 1.
• Page 137
  Do not drive the vehicle on flooded roads as it could cause short circuiting of electrical/electronic parts, or engine damage or stalling from water absorption. If the vehicle has been immersed in water, consult an Authorized Mazda Dealer. 3-55 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 138
  Before Driving Driving Tips Driving on Uneven Road Your vehicle’s suspension and underbody can be damaged if driven on rough/uneven roads or over speed bumps at excessive speeds. Use care and reduce speed when traveling on rough/uneven roads or over speed bumps. Use care not to damage the vehicle’s underbody, bumpers or muffler(s) when driving under the following conditions: Ascending or descending a slope with a sharp transition angle…
• Page 139
  Before Driving Driving Tips Turbocharger Information (SKYACTIV-D 2.2) CAUTION After driving at freeway speeds or up a long hill, idle the engine at least 30 seconds before stopping it. Otherwise, the turbocharger could be damaged. Racing or over-revving the engine, particularly after it’s just been started, can damage the turbocharger.
• Page 140
  Never overload your vehicle or trailer. Consult an Authorized Mazda Dealer if you need further details. CAUTION Do not tow a trailer during the first 1,000 km (600 miles) of your new Mazda. If you do, you may damage the engine, transaxle, differential, wheel bearings, and other power-train components.
• Page 141
  Before Driving Towing High-altitude operation CAUTION Be aware of the towing load weight differences when towing at high altitudes. For altitudes exceeding 1,000 meter (3,280 ft 10 in), always reduce the towing load by 10 % for every 1,000 meter (3,280 ft 10 in) increase in altitude from the load indicated under the maximum GCWR heading in the trailer towing-load table.
• Page 142
  Before Driving Towing Model SKYAC- SKYACTIV-G 2.5 SKYACTIV-D 2.2 TIV-G 2.0 Item Manual Automatic transaxle Automatic transaxle transaxle DISTRIBU- Front 60 % TION OF TRAILER Rear 40 % LOAD WARNING Always keep tow loads within specified limits as indicated in the Trailer Towing-Load Table: Attempting to tow loads greater than those specified is dangerous as it may cause serious handling and performance problems that could result in personal injury or vehicle damage, or both.
• Page 143
  Before Driving Towing ▼ Trailer Hitch Use only a hitch ball recommended by the trailer manufacturer that conforms to the gross trailer weight requirement. When not towing a trailer, remove the trailer hitch (if detachable) to reduce the possibility of damage as a result of the vehicle being rear-ended.
• Page 144
  CAUTION Do not connect a trailer lighting system directly to the lighting system of your Mazda. This may damage your vehicle’s electrical system and lighting systems. Have a recreational vehicle dealer or trailer rental agency connect the system, and inspect the brake lights and turn signals yourself before each trip.
• Page 145
  Stop and re-inspect all lights and connections after driving a short distance. Driving Your Mazda will handle differently with a trailer in tow, so practice turning, backing, and • stopping in a traffic-free area. Take time to get accustomed to the extra weight and length.
• Page 146
  Before Driving Towing Passing Plan well ahead to pass other vehicles, and provide plenty of room before changing lanes. Crosswinds from passing vehicles, especially larger ones, and the effects of rough roads will affect handling. If swaying occurs, firmly grip the steering wheel and reduce speed immediately, but gradually.
• Page 147
  Before Driving Towing Parking Always make sure the tires of the trailer and the tow vehicle are blocked while parked. Apply the parking brake firmly and put the transaxle in P. Avoid parking on an incline, but if you must, follow these instructions: 1.
• Page 148
  Before Driving Towing Recreational Towing An example of «recreational towing» is towing your vehicle behind a motorhome. The transaxle is not designed for towing this vehicle on all 4 wheels. When doing recreational towing refer to «Towing Description» (page 7-21) and carefully follow the instructions.
• Page 149
  When Driving Information concerning safe driving and stopping. Start/Stop Engine……4-4 Switches and Controls…..4-53 Ignition Switch……4-4 Lighting Control……4-53 Starting the Engine……. 4-5 Fog Lights ……… 4-58 Turning the Engine Off….4-11 Turn and Lane-Change Signals……..4-59 Windshield Wipers and Instrument Cluster and Display….
• Page 150
  Rear View Monitor……. 4-173 Rear Cross Traffic Alert (RCTA) ..Rear View Monitor ….4-173 ……….4-113 Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) ….4-117 Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) ……..
• Page 151
  MEMO CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 152
  When Driving Start/Stop Engine Ignition Switch WARNING ▼ Push Button Start Positions Before leaving the driver’s seat, always The system operates only when the key is switch the ignition off, set the parking within operational range. brake, and make sure the selector lever is in Each time the push button start is pressed, the ignition switches in the order of off, Leaving the driver’s seat without switching…
• Page 153
  If the system is deactivated, you will be unable to start the engine by carrying the key. Consult an Authorized Mazda Dealer for details. If the push button start system functions have been deactivated, you can start the engine by following the procedure indicated when the key battery goes dead.
• Page 154
  When Driving Start/Stop Engine After starting a cold engine, the engine 6. Verify that the KEY indicator light • speed increases and a whining sound (green) (if equipped) in the instrument from the engine compartment can be cluster and the push button start heard.
• Page 155
  Have your vehicle inspected engine starting system. This may at an Authorized Mazda Dealer as prevent the engine from starting or soon as possible. If this occurs, the from switching the ignition to ACC or engine can be force-started.
• Page 156
  If the engine still does not start, indicate a malfunction. have your vehicle inspected by an (SKYACTIV-D 2.2) • Authorized Mazda Dealer (page The starter does not rotate until • 7-17). the glow indicator light turns off. (SKYACTIV-D 2.2) •…
• Page 157
  When Driving Start/Stop Engine ▼ Engine Start Function When Key If the engine cannot be started due to a Battery is Dead dead key battery, the engine can be started using the following procedure: 1. Continue to depress the brake pedal CAUTION firmly until the engine has completely started.
• Page 158
  If there is a malfunction with the starting method. Have your vehicle • push button start function, the push inspected at an Authorized Mazda Dealer button start indicator light (amber) as soon as possible. If this occurs, the flashes. In this case, the engine may engine can be force-started.
• Page 159
  When Driving Start/Stop Engine NOTE Turning the Engine Off (SKYACTIV-G 2.0, SKYACTIV-G 2.5) • The cooling fan in the engine WARNING compartment could turn on for a few minutes after the ignition is switched from ON to OFF, whether or not the A/C Do not stop the engine while the vehicle is moving: is on or off, to cool the engine…
• Page 160
  When Driving Instrument Cluster and Display Meters and Gauges Instrument Cluster Type A (With Multi-information Display) Type B (Without Multi-information Display) Steering Switch Active Driving Display (Windshield Type) (Auto Flip-up Type) 4-12 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 161
  When Driving Instrument Cluster and Display ① Speedometer………………….page 4-14 ② Odometer, Trip Meter and Trip Meter Selector………… page 4-14 ③ Tachometer………………….page 4-15 ④ Dashboard Illumination………………page 4-17 ⑤ Trip Computer and INFO Switch…………….page 4-19 ⑥ Engine Coolant Temperature Gauge…………..page 4-16 ⑦…
• Page 162
  When Driving Instrument Cluster and Display ▼ Speedometer Odometer The odometer records the total distance The speedometer indicates the speed of the the vehicle has been driven. vehicle. Trip meter ▼ Odometer, Trip Meter and Trip Meter Selector (Without The trip meter can record the total distance Multi-information Display) of two trips.
• Page 163
  When Driving Instrument Cluster and Display NOTE ▼ Tachometer (Vehicles with type B audio) The tachometer shows engine speed in • If the fuel economy data is reset using thousands of revolutions per minute (rpm). the fuel economy monitor, or trip A is CAUTION reset using the trip meter when the function which synchronizes the fuel…
• Page 164
  When Driving Instrument Cluster and Display ▼ Engine Coolant Temperature Gauge ▼ Fuel Gauge (Without (Without Multi-information Multi-information Display) Display) The fuel gauge shows approximately how Displays the engine coolant temperature. much fuel is remaining in the tank when the ignition is switched ON. We The white gauge indicates that the engine coolant temperature is low, and the red recommend keeping the tank over 1/4 full.
• Page 165
  When Driving Instrument Cluster and Display NOTE ▼ Dashboard Illumination After refueling, it may require some time (Without auto-light control) • for the indicator to stabilize. In addition, When the position lights are turned on the indicator may deviate while driving with the ignition switched ON, the on a slope or curve since the fuel moves brightness of the dashboard illumination is…
• Page 166
  When Driving Instrument Cluster and Display The brightness increases by rotating the ▼ Outside Temperature Display • knob to the right. (Without Multi-information Display) When the ignition is switched ON, the outside temperature is displayed. Bright NOTE Under the following conditions, the •…
• Page 167
  Compass mode • add more than approximately 9 L (2.3 If you have any problems with your trip US gal, 1.9 Imp gal) of fuel. computer, consult an Authorized Mazda The distance-to-empty is the • Dealer. approximate remaining distance the…
• Page 168
  When Driving Instrument Cluster and Display Average fuel economy mode Compass mode This mode displays the average fuel The direction the vehicle is moving is economy by calculating the total fuel displayed in one of the eight cardinal consumption and the total traveled directions while the vehicle is being distance since purchasing the vehicle, driven.
• Page 169
  Blind Spot Monitoring (BSM) Display • Distance Recognition Support System (DRSS) Display • Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) • System Display Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display •…
• Page 170
  When Driving Instrument Cluster and Display The screen content changes each time the INFO switch is pressed. Press the INFO switch Current Fuel Economy, Warning message, Trip Meter A, Average Outside Temperature, Fuel Economy, Outside Odometer, Temperature, Distance-to-empty, Odometer, Fuel Gauge Distance-to-empty, Fuel Gauge Press the INFO switch…
• Page 171
  When Driving Instrument Cluster and Display ▼ Odometer, Trip Meter and Trip For instance, trip meter A can record the Meter Selector distance from the point of origin, and trip meter B can record the distance from The odometer is constantly displayed on where the fuel tank is filled.
• Page 172
  When Driving Instrument Cluster and Display ▼ Engine Coolant Temperature Gauge ▼ Fuel Gauge Displays the engine coolant temperature. The fuel gauge shows approximately how The blue gauge indicates that the engine much fuel is remaining in the tank when coolant temperature is low, and the red the ignition is switched ON.
• Page 173
  When Driving Instrument Cluster and Display (SKYACTIV-D 2.2) ▼ Outside Temperature Display If inconsistency in engine performance or When the ignition is switched ON, the stalling occurs due to low fuel level outside temperature is displayed. conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US gal, 2.2 Imp gal) of fuel.
• Page 174
  When Driving Instrument Cluster and Display ▼ Distance-to-empty ▼ Average Fuel Economy This displays the approximate distance The average fuel economy is calculated you can travel on the remaining fuel based every minute from the total traveled on the fuel economy. distance on the trip meter and the total fuel The distance-to-empty will be calculated consumption, and the average fuel…
• Page 175
  When Driving Instrument Cluster and Display ▼ Maintenance Monitor (Except Message display SKYACTIV-D 2.2) When the remaining time or the distance approaches 0, a message is displayed each The following maintenance period time the ignition is switched ON. notifications can be displayed by turning the Maintenance Monitor on.
• Page 176
  SCR warning light turns on/flashes and a warning message is displayed. Refer to Selective Catalytic Reduction Refer to Mazda Radar Cruise Control with (SCR) System Indications on page 4-170. Stop & Go function (MRCC with Stop & ▼ Blind Spot Monitoring (BSM) Go function) on page 4-117.
• Page 177
  When Driving Instrument Cluster and Display ▼ Lane-keep Assist System (LAS) & ▼ Compass Display Lane Departure Warning System The direction the vehicle is moving is (LDWS) Display displayed while the vehicle is being driven. Displays the system status. Refer to Lane-keep Assist System (LAS) Display Direction &…
• Page 178
  When Driving Instrument Cluster and Display Active Driving Display Windshield Type Dust-proof sheet Display Optical receiver Auto Flip-up Type Mirror Combiner Optical receiver WARNING Always adjust the display brightness and position with the vehicle stopped: Adjusting the display brightness and position while driving the vehicle is dangerous as doing so could distract your attention from the road ahead and lead to an accident.
• Page 179
  Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) • Operation Conditions and Warnings Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) on page 4-117. Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Operation •…
• Page 180
  When Driving Instrument Cluster and Display Vehicle Speed • Each setting/adjustment for the active driving display can be performed on the center display. 1. Select the icon on the home screen and display the Settings screen. 2. Select the AD-Disp tab. 3.
• Page 181
  When Driving Instrument Cluster and Display Warning/Indicator Lights Instrument Cluster varies depending on model and specifications. Instrument Cluster Type A (With Multi-information Display) Type B (Without Multi-information Display) Center of Dashboard Warning/Indicator lights will appear in any of the highlighted areas 4-33 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 182
  When Driving Instrument Cluster and Display ▼ Warning Indication/Warning Lights These lights turn on or flash to notify the user of the system operation status or a system malfunction. Signal Warning Page *1*2 7-24 Brake System Warning Indication/Warning Light Electronic Brake Force Distribu- tion System Warning…
• Page 183
  High Beam Control System (HBC) Warning Indication/Warning Light 7-27 (Amber) Blind Spot Monitoring (BSM) Warning Indication 7-27 Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop 7-27 & Go function) Warning Indication (Amber) Lane-keep Assist System (LAS) & Lane Departure Warning System…
• Page 184
  The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer. The light turns on continuously when the Electric Parking Brake (EPB) is applied.
• Page 185
  Flasher 4-67 4-72 Brake Pedal Operation demand Indicator Light (Green) 4-78 AUTOHOLD Active Indicator Light Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop 4-127 & Go function) indicator Light Traction Control System (TCS) 4-83 Dynamic Stabil-…
• Page 186
  When Driving Instrument Cluster and Display Signal Indicator Page Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop 4-121 & Go function) Main Indication (White) Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop 4-121 &…
• Page 187
  • reset of the vehicle engine control unit is necessary. The wrench indicator light turns on under Your Authorized Mazda Dealer will be the following conditions: able to reset the engine control unit or When the preset maintenance period has •…
• Page 188
  The maintenance period for the glow plug or a problem in the system may be indicated under the following conditions. Have your vehicle inspected by an Authorized Mazda Dealer. The glow indicator light does not turn • on when the ignition is switched ON or it remains on.

• Page 189: Manual Transaxle Operation

  When Driving Manual Transaxle Operation Manual Transaxle Shift WARNING Pattern Do not use sudden engine braking on slippery road surfaces or at high speeds: Shifting down while driving on wet, snowy, or frozen roads, or while driving at high speeds causes sudden engine braking, which is dangerous.

• Page 190
  75 km/h (46 mph) 5 to 6 79 km/h (49 mph) Indication Condition The selected gear position is dis- For cruising, Mazda recommends these Numeral played. shift points: Shift up or down to the indicated and numeral gear position is recommended.
• Page 191
  When Driving Manual Transaxle Operation Downshifting When you must slow down in heavy traffic or on a steep upgrade, downshift before the engine starts to overwork. This reduces the chance of stalling and gives better acceleration when you need more speed.

• Page 192: Automatic Transaxle

  When Driving Automatic Transaxle Automatic Transaxle Controls Lock-release button Various Lockouts: Indicates that you must depress the brake pedal and hold in the lock-release button to shift (The ignition must be switched ON). Indicates the selector lever can be shifted freely into any position. Indicates that you must hold in the lock-release button to shift.

• Page 193
  R, except under rare circumstances as explained in Rocking the Vehicle (page 3-52). 3. Press and hold the lock-release button. 4. Move the selector lever. Take the vehicle to an Authorized Mazda Dealer to have the system checked. 4-45 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 194
  When Driving Automatic Transaxle N (Neutral) M (Manual) In N, the wheels and transaxle are not M is the manual shift mode position. locked. The vehicle will roll freely even Gears can be shifted up or down by on the slightest incline unless the parking operating the selector lever.
• Page 195
  When Driving Automatic Transaxle Gear position indication Manual Shift Mode The numeral for the selected gear The manual shift mode gives you the feel illuminates. of driving a manual transaxle vehicle by allowing you to operate the selector lever manually. This allows you to control engine rpm and torque to the drive wheels much like a manual transaxle when more control is desired.
• Page 196
  When Driving Automatic Transaxle ▼ Manually Shifting Up ▼ Manually Shifting Down You can shift gears up by operating the You can shift gears down by operating the selector lever. selector lever. M1 → M2 → M3 → M4 → M5 → M6 M6 →…
• Page 197
  When Driving Automatic Transaxle ▼ Second Gear Fixed Mode When the selector lever is moved back while the vehicle speed is about 10 km/h (6.2 mph) or less, the transaxle is set in the second gear fixed mode. The gear is fixed in second while in this mode for easier acceleration from a stop and driving on slippery roads such as snow-covered…
• Page 198
  When Driving Automatic Transaxle ▼ Shift Gear (Shifting) Speed Limit For each gear position while in the manual mode, the speed limit is set as follows: When the selector lever is operated within the range of the speed limit, the gear is shifted. Shift up The gear does not shift up while the vehicle speed is lower than the speed limit.
• Page 199
  When Driving Automatic Transaxle ▼ Recommendations for Shifting Upshifting For normal acceleration and cruising, Mazda recommends these shift points: Gear Vehicle speed M1 to M2 24 km/h (15 mph) M2 to M3 40 km/h (25 mph) M3 to M4 65 km/h (40 mph)
• Page 200
  When Driving Automatic Transaxle Climbing steep grades from a stop Driving Tips To climb a steep grade from a stopped position: WARNING 1. Depress the brake pedal. 2. Shift to D or M1, depending on the Do not let the vehicle move in a direction load weight and grade steepness.
• Page 201
  When Driving Switches and Controls Lighting Control ▼ Headlights Turn the headlight switch to turn the headlights and other exterior lights on or off. When the lights are turned on, the lights-on indicator light in the instrument cluster turns on. NOTE If the light switch is left on, the lights will automatically switch off approximately 30 •…
• Page 202
  When Driving Switches and Controls With auto-light control Switch Position ACC or ACC or ACC or ACC or Ignition Position Headlights Auto Auto Daytime running lights Taillights Parking lights Auto Auto License plate lights Side-marker lights The lights are turned on while the vehicle is driven. The lights are turned on by the auto light function.
• Page 203
  When Driving Switches and Controls CAUTION Do not shade the light sensor by adhering a sticker or a label on the windshield. Otherwise the light sensor will not operate correctly. The light sensor also works as a rain sensor for the auto-wiper control. Keep hands and scrapers clear of the windshield when the wiper lever is in the position and the ignition is switched ON as fingers could be pinched or the wipers and wiper blades could be…
• Page 204
  When Driving Switches and Controls ▼ Headlight High-Low Beam The headlight high-beam indicator light in the instrument cluster illuminates The headlights switch between high and simultaneously. The lever will return to low beams by moving the lever forward or the normal position when released. backward.
• Page 205
  When Driving Switches and Controls ▼ Leaving Home Light ▼ Headlight Leveling The leaving home light turns on the lights The number of passengers and weight of when the transmitter unlock button is cargo in the luggage compartment change pressed while away from the vehicle. the angle of the headlights.
• Page 206
  When Driving Switches and Controls Front seat Switch Fog Lights Rear Load Posi- seat Driver Passenger tion The fog lights can be turned on with the × ― ― × ignition switched ON and the headlights turned on. ×: Yes ―: No Use this switch to turn on the fog lights.
• Page 207
  When Driving Switches and Controls ▼ Lane-Change Signals Turn and Lane-Change Signals Move the lever halfway toward the direction of the lane change―until the The ignition must be switched ON to use indicator flashes― and hold it there. It the turn and lane-change signals. will return to the off position when released.
• Page 208
  OFF, visibility, and could result in an accident. consult an Authorized Mazda Dealer as soon as possible. Only use windshield washer fluid mixed ▼ Windshield Wipers…
• Page 209
  When Driving Switches and Controls Variable-speed intermittent wipers Auto-wiper control Set the lever to the intermittent position When the wiper lever is in the and choose the interval timing by rotating position, the rain sensor senses the amount the ring. of rainfall on the windshield and turns the wipers on or off automatically (off―intermittent―low speed―high…
• Page 210
  When Driving Switches and Controls NOTE CAUTION Switching the auto-wiper lever from the • to the position while driving Do not shade the rain sensor by adhering activates the windshield wipers once, a sticker or a label on the windshield. after which they operate according to Otherwise the rain sensor will not the rainfall amount.
• Page 211
  If the washer does not work, inspect the The auto-wiper control functions can be • turned off. Refer to Personalization fluid level (page 6-30). If the fluid level Features on page 9-11. is normal, consult an Authorized Mazda Dealer. 4-63 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 212
  Fully Automatic Climate Control will stop. Indicator light If the washer does not work, inspect the fluid level (page 6-30). If the fluid level is normal and the washer still does not work, consult an Authorized Mazda Dealer. 4-64 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 213
  When Driving Switches and Controls The windshield wiper de-icer operates in CAUTION conjunction with the rear window defogger. Do not use sharp instruments or window To turn on the windshield wiper de-icer, cleaners with abrasives to clean the switch the ignition ON and press the rear inside of the rear window surface.
• Page 214
  When Driving Switches and Controls ▼ Mirror Defogger Horn The mirror defoggers defrost the outside To sound the horn, press the mark on mirrors. the steering wheel. The mirror defoggers operate in conjunction with the rear window defogger. To turn on the mirror defoggers, switch the ignition ON and press the rear window defogger switch (page 4-64).
• Page 215
  When Driving Switches and Controls Hazard Warning Flasher HomeLink Wireless Control System The hazard warning lights should always be used when you stop on or near a roadway in an emergency. NOTE HomeLink and HomeLink house icon are registered trademarks of Gentex Corporation.
• Page 216
  For further information, contact HomeLink at 1-800-355-3515 or www.homelink.com CAUTION or an Authorized Mazda Dealer. When programming a garage door opener Always check the areas surrounding or a gate, disconnect the power to these garage doors and gates for people or devices before performing programming.
• Page 217
  When Driving Switches and Controls NOTE 8. Firmly press and release the “learn” or If the HomeLink indicator light does “smart” button. (The name and color not change to a rapidly blinking light, of the button may vary by contact HomeLink at manufacturer.) www.homelink.com or call NOTE…
• Page 218
  When Driving Switches and Controls ▼ Gate operator/Canadian ▼ Operating the HomeLink System Programming Press the programmed HomeLink button Canadian radio-frequency laws require to operate a programmed device. The code transmitter signals to “time-out” (or quit) will continue being transmitted for a after several seconds of transmission ―…
• Page 219
  When Driving Brake Brake System Dry off brakes that have become wet by driving slowly, releasing the accelerator ▼ Foot Brake pedal and lightly applying the brakes several times until the brake performance This vehicle has power-assisted brakes returns to normal: that adjust automatically through normal Driving with wet brakes is dangerous.
• Page 220
  When Driving Brake Wear shoes appropriate for driving in An operation sound occurs when • applying or releasing the EPB, however, order to avoid your shoe contacting the this does not indicate a malfunction. brake pedal when depressing the If the EPB is not used for long periods, accelerator pedal.
• Page 221
  When Driving Brake When applying the EPB EPB manual release The EPB can be applied regardless of the Firmly depress the brake pedal and press ignition switch position. the EPB switch. Securely depress the brake pedal and pull up the EPB switch. The EPB is applied and the EPB indicator light and the EPB switch indicator light turn on.
• Page 222
  • (Automatic transaxle) When you hear this noise, consult an Selector lever is in the D, M, or R • Authorized Mazda Dealer as soon as position possible. NOTE If something such as the driver’s foot contacts the accelerator pedal with the…
• Page 223
  The brakes could fail and cause a serious enhancing braking performance. accident. As soon as you hear a screeching noise consult an Authorized Mazda Dealer. When the brake pedal is depressed hard or depressed more quickly, the brakes apply more firmly.
• Page 224
  When Driving Brake AUTOHOLD The AUTOHOLD function automatically holds the vehicle stopped, even if you take your foot off the brake pedal. This function can be best used while stopped in traffic or at a traffic light. The brakes are released when you resume driving the vehicle such as by releasing the clutch pedal with the shift lever shifted to a position other than the neutral position (manual transaxle vehicle) or depressing the accelerator pedal (automatic transaxle vehicle).
• Page 225
  NOTE Under the following conditions, a problem with the AUTOHOLD is occurring. Have your • vehicle inspected at an Authorized Mazda Dealer as soon as possible. The brake pedal operation demand warning light (red) in the instrument cluster flashes •…
• Page 226
  When Driving Brake ▼ AUTOHOLD System is Turned On 2. The AUTOHOLD active indicator light in the instrument cluster turns on Press the AUTOHOLD switch and when and the brakes are held. the AUTOHOLD standby indicator light turns on, the AUTOHOLD function turns AUTOHOLD standby indicator light 3.
• Page 227
  When Driving Brake To release AUTOHOLD and start When about ten minutes or longer have • driving the vehicle passed since the AUTOHOLD operation started, the electric parking brake If you do any of the following actions to (EPB) is automatically applied. Because resume driving the vehicle, the brakes the AUTOHOLD is restored when release automatically and the…
• Page 228
  When Driving Brake NOTE Hill Launch Assist (HLA) (Without multi-information display) • HLAis a function which assists the driver If the AUTOHOLD switch is pressed in accelerating from a stop while on a without depressing the brake pedal slope. When the driver releases the brake while the AUTOHOLD is operating pedal and depresses the accelerator pedal (AUTOHOLD active indicator light is…
• Page 229
  When Driving Brake HLA does not operate while the • TCS/DSC indicator light is illuminated. Refer to Warning/Indicator Lights on page 4-33. HLA does not turn off even if the TCS • OFF switch is pressed to turn off the TCS.
• Page 230
  When Driving ABS/TCS/DSC NOTE Antilock Brake System Braking distances may be longer on (ABS) • loose surfaces (snow or gravel, for example) which usually have a hard The ABS control unit continuously foundation. A vehicle with a normal monitors the speed of each wheel. If one braking system may require less wheel is about to lock up, the ABS distance to stop under these conditions…
• Page 231
  Take your vehicle to an (following another vehicle too closely), and Authorized Mazda Dealer. hydroplaning (reduced tire friction and road contact because of water on the road NOTE surface). You can still have an accident.
• Page 232
  Refer to TCS OFF Switch on page 4-84. If the light remains illuminated and the TCS is not switched off, take your vehicle to an Authorized Mazda Dealer. The DSC may have a malfunction. Press the switch again to turn the TCS back on.
• Page 233
  You can still have an accident. CAUTION The DSC may not operate correctly unless the following are observed: Use tires of the correct size specified for your Mazda on all four wheels. 4-85 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 234
  When Driving Fuel Economy Monitor Fuel Economy Monitor For vehicles with type B audio, the Fuel Consumption information is displayed by operating each icon in the display. In addition, after completing a trip, the total energy efficiency to date is displayed in the ending display when the ending display is turned on.
• Page 235
  When Driving Fuel Economy Monitor NOTE The fuel economy data can be reset by doing the following operation: • Press the reset switch from the menu screen. • When the function which synchronizes the fuel economy monitor and the trip meter is •…
• Page 236
  NOTE When the sport mode is selected, driving at higher engine speeds increases and it may • increase fuel consumption. Mazda recommends that you cancel the sport mode on normal driving. Drive mode cannot be switched in the following conditions: •…
• Page 237
  When Driving i-ACTIV AWD Utility and AWD vehicles are not designed i-ACTIV AWD Operation for cornering at high speeds any more than AWD provides excellent drivability on low profile sports cars are designed to snow-covered and ice-packed roads, sand perform satisfactorily under off-road and mud, as well as on steep slopes and conditions.
• Page 238
  When Driving i-ACTIV AWD Make sure to equip the vehicle with • genuine wheels of the specified size, on all wheels. With AWD, the system is calibrated for all four wheels being of the same dimensions. Tire chains Install tire chains to the front tires. •…

• Page 239: Power Steering

  If the steering feels stiffer than usual during normal driving or the steering vibrates, consult an Authorized Mazda Dealer. The warning indication/warning light • notifies the driver of system abnormalities and operation conditions.

• Page 240
  Rear obstruction detection when leaving a parking space Rear Cross Traffic Alert (RCTA)…………….page 4-113 Driver support systems Inter-vehicle distance Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) ……………………..page 4-117 Lane departure Lane-keep Assist System (LAS)…………….page 4-131 4-92 *Some models.
• Page 241
  Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) • Traffic Sign Recognition System (TSR) • Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) • Smart City Brake Support (SCBS) • Smart Brake Support (SBS) •…
• Page 242
  When Driving i-ACTIVSENSE Radar sensors (rear) The radar sensors (rear) function by detecting the radio waves reflected off a vehicle approaching from the rear or an obstruction sent from the radar sensors. The following systems also use the radar sensors (rear). Blind Spot Monitoring (BSM) •…
• Page 243
  When Driving i-ACTIVSENSE Adaptive Front Lighting System (AFS) The adaptive front lighting system (AFS) automatically adjusts the headlight beams to the left or right in conjunction with the operation of the steering wheel after the headlights have been turned on. A system malfunction or operation conditions are indicated by a warning.
• Page 244
  When Driving i-ACTIVSENSE High Beam Control System (HBC) The HBC determines the conditions in front of the vehicle using the Forward Sensing Camera (FSC) while driving in darkness to automatically switch the headlights between high and low beams. Refer to Warning/Indicator Lights on page 4-33. While driving the vehicle at a speed of about 30 km/h (19 mph) or more, the headlights are switched to high beams when there are no vehicles ahead or approaching in the opposite direction.
• Page 245
  When Driving i-ACTIVSENSE NOTE The timing in which the system switches the headlights changes under the following conditions. If the system does not switch the headlights appropriately, manually switch between high and low beams according to the visibility as well as road and traffic conditions.
• Page 246
  When Driving i-ACTIVSENSE ▼ Manual Switching Switching to low beams Shift the lever to the low beam position. The HBC indicator light (green) turns off. Switching to high beams Turn the headlight switch to the position. The HBC indicator light (green) turns off and the is illuminated.
• Page 247
  When Driving i-ACTIVSENSE Blind Spot Monitoring (BSM) The BSM is designed to assist the driver in checking the area to the rear of the vehicle on both sides during lane changes by notifying the driver of the presence of vehicles approaching from the rear in an adjacent lane.
• Page 248
  In the following cases, the BSM OFF indicator light turns on and operation of the system • is stopped. If the BSM OFF indicator light remains illuminated, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible. Some problem with the system including the BSM warning indicator lights is detected. •…
• Page 249
  When Driving i-ACTIVSENSE When there is a difference in the height between your driving lane and the adjacent • lane. Directly after the BSM system becomes operable by changing the setting. • If the road width is extremely narrow, vehicles two lanes over may be detected. The •…
• Page 250
  When Driving i-ACTIVSENSE ▼ Blind Spot Monitoring (BSM) Warning Indicator Light/Display Indicator/Blind Spot Monitoring (BSM) Warning Beep The BSM or Rear Cross Traffic Alert (RCTA) system notifies the driver of the presence of vehicles in adjacent lanes or at the rear of the vehicle using the BSM warning indicator light, the warning sound and the display indicator (vehicles with multi-information display and active driving display) (BSM) while the systems are operational.
• Page 251
  When Driving i-ACTIVSENSE If the BSM warning indicator lights are difficult to see due to glare from surrounding brightness when traveling on snow-covered roads or under foggy conditions, press the dimmer cancellation button to cancel the dimmer and increase the brightness of BSM warning indicator lights when they turn on.
• Page 252
  The TSR is not supported in some countries or regions. For information concerning the • supported countries or regions, consult an Authorized Mazda Dealer. The TSR operates only if the navigation system SD card (Mazda genuine) is inserted in • the SD card slot. Consult an Authorized Mazda Dealer for details.
• Page 253
  When Driving i-ACTIVSENSE Stop sign Sign recognized and displayed at same time Active driving display indication WARNING Always check the traffic signs visually while driving. The TSR helps prevent the driver from overlooking traffic signs and provides support for safer driving.
• Page 254
  When Driving i-ACTIVSENSE The illumination of the headlights is weakened because of dirt or the optical axis is • deviated. The windshield is dirty or foggy. • The windshield and camera are fogged (water droplets). • Strong light is directed at the front of the vehicle (such as backlight or high-beam •…
• Page 255
  When Driving i-ACTIVSENSE Stop signs NOTE Speed limit signs When the vehicle speed is about 1 km/h (0.6 mph) or faster, the speed limit sign is • displayed when any one of the following conditions are met. The Forward Sensing Camera (FSC) recognizes a speed limit sign as a sign targeted for •…
• Page 256
  When Driving i-ACTIVSENSE The Forward Sensing Camera (FSC) recognizes a stop sign as a sign targeted for your • vehicle. When a certain period of time has elapsed since the stop sign was displayed, display of • the stop sign stops. ▼…
• Page 257
  When Driving i-ACTIVSENSE Warning activation timing 0: If the vehicle speed exceeds the speed limit sign displayed in the display, the • excessive speed warning is activated. 5: If the vehicle speed exceeds the speed limit sign displayed in the display by 5 km/h •…
• Page 258
  The DRSS operation status is indicated in the active driving display or multi-information display. Regarding malfunctions, check the vehicle conditions or have it inspected by an Authorized Mazda Dealer according to the content of the displayed message. Refer to Warning/Indicator Lights on page 4-33.
• Page 259
  When Driving i-ACTIVSENSE NOTE When the ignition is switched off, the operation status before the system was turned off is • maintained. For example, if the ignition is switched off with the DRSS operable, the system will be operable when the ignition is switched ON the next time. The DRSS can be turned on/off and the system’s sensitivity can be changed.
• Page 260
  When Driving i-ACTIVSENSE Distance-between-vehicles guidelines Indication on display Distance between vehi- Distance between vehi- cles guidelines cles guidelines Multi-information dis- (During travel at about (During travel at about Active driving display play 40 km/h (25 mph) 80 km/h (50 mph) About 25 m (82 ft) About 50 m (164 ft) About 20 m (66 ft)
• Page 261
  When Driving i-ACTIVSENSE Rear Cross Traffic Alert (RCTA) The RCTA system is designed to assist the driver in checking the area to the rear of the vehicle on both sides while the vehicle is reversing by alerting the driver to the presence of vehicles approaching the rear of the vehicle.
• Page 262
  When Driving i-ACTIVSENSE RCTA operation 1. The RCTA system operates when the selector lever is shifted to the reverse (R) position. 2. If there is the possibility of a collision with an approaching vehicle, the Blind Spot Monitoring (BSM) warning indicator lights flashes and the warning beep is activated simultaneously.
• Page 263
  • operation of the system is stopped. If the Blind Spot Monitoring (BSM) OFF indicator light remains illuminated, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible. Some problem with the system including the Blind Spot Monitoring (BSM) warning •…
• Page 264
  When Driving i-ACTIVSENSE The vehicle is parked on a slant. • Your vehicle Directly after the Blind Spot Monitoring (BSM) system becomes operable using the • personalization feature. Radio wave interference from a radar sensor equipped on a nearby parked vehicle. •…
• Page 265
  When Driving i-ACTIVSENSE Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) The MRCC with Stop & Go function system is designed to maintain headway control with a vehicle ahead according to your vehicle’s speed using a radar sensor (front) to detect the distance to the vehicle ahead and a preset vehicle speed without you having to use the accelerator or brake pedals.
• Page 266
  When Driving i-ACTIVSENSE Roads where frequent and repetitive acceleration and deceleration occur (Driving under these conditions using the MRCC with Stop & Go function system is not possible). When entering and exiting interchanges, service areas, and parking areas of highways (If you exit a highway while headway control is in use, the vehicle ahead will no longer be tracked and your vehicle may accelerate to the set speed).
• Page 267
  When Driving i-ACTIVSENSE During headway control travel, the system accelerates and decelerates your vehicle in • conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate for a lane change or if the vehicle ahead brakes suddenly causing you to close in on the vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake pedal depending on the conditions.
• Page 268
  When Driving i-ACTIVSENSE ▼ Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Display Indication The MRCC with Stop & Go function setting status and operation conditions are indicated on the multi-information display and the active driving display.
• Page 269
  If there is a problem with the MRCC with Stop & Go function system, a message is displayed on the multi-information display. Check the center display to verify the problem and then have your vehicle inspected by an Authorized Mazda Dealer. Refer to Message Indicated on Display on page 7-42.
• Page 270
  In the following cases, the MRCC with Stop & Go function system is canceled when the • vehicle is traveling at 30 km/h (19 mph) or less and “Mazda Radar Cruise Control disabled under 30 km/h” is displayed in the multi-information display.
• Page 271
  When Driving i-ACTIVSENSE The MRCC with Stop & Go function can switch to the cruise control function. • Refer to Cruise Control Function on page 4-128. How to set the speed 1. Adjust the vehicle speed to the desired setting using the accelerator pedal. 2.
• Page 272
  When Driving i-ACTIVSENSE How to set the distance-between-vehicles during headway control The distance-between-vehicles is set to a shorter distance by pressing the switch. The distance-between-vehicles is set to a longer distance by pressing the switch. The distance-between-vehicles can be set to 4 levels; Long, medium, short, and extremely short distance.
• Page 273
  When Driving i-ACTIVSENSE How to change the set vehicle speed When accelerating using the SET • switch while in headway control, the set To accelerate/decelerate using the SET vehicle speed can be adjusted but switch acceleration is not possible. If there is When you press the SET switch, the no longer a vehicle ahead, acceleration vehicle accelerates and when you press the…
• Page 274
  When Driving i-ACTIVSENSE The Smart City Brake Support (SCBS) • has operated. When traveling on a downslope for a • long period of time. There is a problem with the system. • The engine has stalled. • The electric parking brake (EPB) is •…
• Page 275
  When Driving i-ACTIVSENSE ▼ Stop Hold Control While in headway control using the MRCC with Stop & Go function system, your vehicle will stop when a vehicle ahead stops. When the vehicle is stopped and the stop hold control operates, the MRCC with Stop & Go function indicator light turns on. NOTE If the MRCC with Stop &…
• Page 276
  When Driving i-ACTIVSENSE Resume driving information If you do not resume driving within a few seconds after the vehicle ahead starts moving, the multi-information display vehicle-ahead indication flashes to urge the driver to resume driving. ▼ Cruise Control Function Always drive carefully: The warnings and brake control will not While this function is operating, the operate after the headway control function…
• Page 277
  When Driving i-ACTIVSENSE Switching to cruise control function How to set the speed When the MODE switch is pressed until Adjust the system to the desired vehicle the system switches to the cruise main speed using the accelerator pedal. indication (white) while the MRCC with When the SET or SET switch is Stop &…
• Page 278
  When Driving i-ACTIVSENSE How to Decrease the Set Speed When the vehicle speed is less than 21 • km/h (13 mph), the cruise control Press the SET switch continuously and function is canceled. In this case, the release the switch at the desired speed. vehicle speed will not return to the The set speed can be adjusted original set speed even if the vehicle is…
• Page 279
  When Driving i-ACTIVSENSE Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) The LAS&LDWS alerts the driver that the vehicle may be deviating from its lane and it provides steering assistance to help the driver stay within the vehicle lanes. The Forward Sensing Camera (FSC) detects the white lines (yellow lines) of the vehicle lane in which the vehicle is traveling and if the system determines that the vehicle may deviate from its lane, it operates the electric power steering to assist the driver’s steering…
• Page 280
  Do not modify the suspensions. Always use wheels of the specified type and size for the front and rear wheels. Consult an Authorized Mazda Dealer for tire replacement. NOTE When the turn signal lever is operated for a lane change, the LAS&LDWS is •…
• Page 281
  When Driving i-ACTIVSENSE Tires other than conventional tires are equipped. • Vehicle is driven on an intersection or junction, or on a forked road. • The white (yellow) lane lines are less visible because of dirt or fading/patchiness. • A vehicle in front of your vehicle is running near a white (yellow) lane line making it •…
• Page 282
  When Driving i-ACTIVSENSE ▼ System Operation The engine is running. • The vehicle speed is about 60 km/h (37 • Make sure that the LAS&LDWS OFF mph) or faster. indicator light in the instrument cluster is The system detects white (yellow) lane •…
• Page 283
  When Driving i-ACTIVSENSE The vehicle is making a sharp curve. If the driver takes his or her hands off • • The brake pedal is depressed. the steering wheel (not holding the • The steering wheel is operated abruptly. steering wheel), the warning sound is •…
• Page 284
  When Driving i-ACTIVSENSE The timing at which the lane departure (Operational status) • warning is activated and the steering Multi-information Display wheel operation assist is performed varies. The following settings for the • LAS&LDWS can be changed. Refer to Personalization Features on page 9- Active Driving Display Steering operation assist operational/ •…
• Page 285
  When Driving i-ACTIVSENSE Auto cancel Auto cancel of warning/steering assist In the following cases, the LAS&LDWS is When the following operations are automatically canceled, the LAS&LDWS performed, the LAS&LDWS operation is warning indication (amber) turns on, and canceled automatically. The LAS&LDWS an alert is displayed.
• Page 286
  When Driving i-ACTIVSENSE Steering operation assist OFF The vehicle speed is about 60 km/h (37 • (non-operational) mph) or faster. The vehicle is driven on a straight road • The steering operation assist for the or road with gentle curves. LAS&LDWS can be changed to The engine is running.
• Page 287
  When Driving i-ACTIVSENSE Vehicle lane line display (Auto cancel of warnings) When the LAS&LDWS becomes When the following operations are operational while on standby, the vehicle performed, the LAS&LDWS determines lane lines are displayed in the that the driver intends to make a lane multi-information display.
• Page 288
  In the following cases, the LAS&LDWS • is canceled automatically and the LAS&LDWS OFF indicator light turns on. Have your vehicle inspected at an Authorized Mazda Dealer. There is a malfunction in the power • steering. There is a malfunction in the TCS.
• Page 289
  When Driving i-ACTIVSENSE ▼ Lane Departure Warning If the system determines that the vehicle may deviate from its lane, the lane departure warning (beep sound, rumble sound , or steering wheel vibration) is activated and the direction in which the system determines that the vehicle may deviate is indicated in the multi-information display and the active driving display.
• Page 290
  When Driving i-ACTIVSENSE 1 A rumble strip is a series of grooves in the road pavement surface positioned at specific intervals, and when the vehicle passes over it a vibration and rumble sound is produced which alerts the driver that the vehicle is departing from the lane. The rumble sound is a reproduction of the sound which occurs when a vehicle passes over a rumble strip.
• Page 291
  When Driving i-ACTIVSENSE Smart City Brake Support (SCBS) The SCBS system alerts the driver of a possible collision using an indication in the display and a warning sound when the Forward Sensing Camera (FSC) detects a vehicle ahead and determines that a collision with a vehicle ahead is unavoidable while the vehicle is being driven at a vehicle speed of about 4 to 80 km/h (2 to 50 mph).
• Page 292
  When Driving i-ACTIVSENSE CAUTION In the following cases, turn the system off to prevent a mis-operation: The vehicle is being towed or when towing another vehicle. The vehicle is on a chassis roller. When driving on rough roads such as in areas of dense grass or off-road. Refer to Stopping the Smart City Brake Support (SCBS) system Operation on page 4-146 on how to turn off the SCBS system.
• Page 293
  When Driving i-ACTIVSENSE If you suddenly come close to a vehicle ahead. • 2-wheeled vehicles, pedestrians, animals or standing trees. • Vehicle is driven with some of the tires having significant wear. • ▼ Smart City Brake Support (SCBS) ▼ Automatic Brake Operation Display Indicator Light (Red) The automatic brake operation display is If the Smart City Brake Support (SCBS) is…
• Page 294
  When Driving i-ACTIVSENSE ▼ Stopping the Smart City Brake Support (SCBS) System Operation The SCBS system can be temporarily deactivated. Refer to Personalization Features on page 9-11. When the SCBS system is turned off, the Smart City Brake Support (SCBS) OFF indicator light turns on.
• Page 295
  When Driving i-ACTIVSENSE Smart Brake Support (SBS) The SBS system alerts the driver of a possible collision using a display and warning sound if the radar sensor (front) and the Forward Sensing Camera (FSC) determine that there is the possibility of a collision with a vehicle ahead while the vehicle is being driven at about 15 km/h or faster (10 mph or faster).
• Page 296
  When Driving i-ACTIVSENSE The vehicle is driven at the same speed as the vehicle ahead. • The accelerator pedal is depressed. • The brake pedal is depressed. • The steering wheel is being operated. • The selector lever is being operated. •…
• Page 297
  When Driving i-ACTIVSENSE ▼ Collision Warning ▼ Stopping The Smart Brake Support (SBS) System Operation If there is the possibility of a collision with The SBS system can be temporarily a vehicle ahead, the beep sounds deactivated. continuously and a warning is indicated in Refer to Personalization Features on page the multi-information display and the 9-11.
• Page 298
  • Traffic Sign Recognition System (TSR) • Smart City Brake Support (SCBS) • Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) • Smart Brake Support (SBS) • Forward Sensing Camera (FSC) The Forward Sensing Camera (FSC) determines the conditions ahead of the vehicle while traveling at night and detects traffic lanes.
• Page 299
  Traffic Sign Recognition System (TSR) Smart City Brake Support (SCBS) Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Smart Brake Support (SBS) The direction in which the Forward Sensing Camera (FSC) is pointed has been finely adjusted.
• Page 300
  When Driving i-ACTIVSENSE The Forward Sensing Camera (FSC) includes a function for detecting a soiled windshield and informing the driver, however, depending on the conditions, it may not detect plastic shopping bags, ice or snow on the windshield. In such cases, the system cannot accurately determine a vehicle ahead and may not be able to operate normally.
• Page 301
  Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) warning • indication Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go • function) warning indication Smart Brake Support/Smart City Brake Support (SBS/SCBS) warning indication/ •…
• Page 302
  Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) warning • indication Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go • function) warning indication Smart Brake Support/Smart City Brake Support (SBS/SCBS) warning indication/ •…
• Page 303
  Your vehicle is equipped with a radar sensor (front). The following systems also use the radar sensor (front). Distance Recognition Support System (DRSS) • Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) • Smart Brake Support (SBS) •…
• Page 304
  Do not remove, disassemble, or modify the radar sensor (front). For repairs, replacement or paint work around the radar sensor (front), consult an Authorized Mazda Dealer. Do not modify the suspension. If the suspension are modified, the vehicle’s posture could change and the radar sensor (front) may not be able to correctly detect a vehicle ahead or an obstruction.
• Page 305
  When Driving i-ACTIVSENSE When driving on roads with little traffic and few vehicles ahead or obstructions for the • radar sensor (front) to detect, “Front Radar Sensor Blocked” may be temporarily displayed, however, this does not indicate a problem. 4-157 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 306
  CAUTION If the rear bumper receives a severe impact, the system may no longer operate normally. Stop the system immediately and have the vehicle inspected at an Authorized Mazda Dealer. NOTE The detection ability of the radar sensors (rear) has limitations. In the following cases, •…
• Page 307
  (rear) detect approaching vehicles correctly. If the direction of the radar sensors (rear) has deviated for some reason, have the vehicle inspected at an Authorized Mazda Dealer. For repairs or replacement of the radar sensors (rear), or bumper repairs, paintwork, and •…

• Page 308: Cruise Control

  ON switch SET/- switch OFF/CANCEL switch NOTE If your Mazda has the following steering switch, your Mazda is equipped with the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system. 4-160 *Some models.

• Page 309
  When Driving Cruise Control Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) on page 4-117. switch SET+ switch RES switch switch SET- switch MODE switch CANCEL switch OFF switch ▼ Cruise Main Indication (White)/…
• Page 310
  When Driving Cruise Control ▼ To Set Speed The cruise control may cancel at about • 15 km/h (9 mph) below the preset speed, 1. Activate the cruise control system by such as when climbing a long, steep pressing the ON switch. The cruise grade.
• Page 311
  When Driving Cruise Control Increasing speed with a single ▼ To Resume Cruising Speed at More RESUME/ switch operation Than 25 km/h (16 mph) Instrument cluster display for vehicle If the cruise control system temporarily speed indicated in km/h: 1 km/h (0.6 mph) canceled (such as by applying the brake Instrument cluster display for vehicle pedal) and the system is still activated, the…
• Page 312
  When Driving Cruise Control When the cruise control system is • temporarily canceled by even one of the applicable cancel conditions, the speed cannot be re-set. (Automatic transaxle) • The cruise control cannot be cancelled while driving in manual mode (selector lever shifted from D to M position).

• Page 313: Tire Pressure Monitoring System

  When Driving Tire Pressure Monitoring System Tire Pressure Monitoring System The Tire Pressure Monitoring System (TPMS) monitors the pressure for each tire. If tire pressure is too low in one or more tires, the system will inform the driver via the warning light in the instrument cluster and by the warning beep sound.

• Page 314
  When the warning light flashes, there may interference with the receiver unit. be a system malfunction. Consult an A digital device such as a personal Authorized Mazda Dealer. • computer. A system error activation may occur in the A current converter device such as a following cases: •…
• Page 315
  Authorized Mazda Dealer change your wheels or both, have the work done by tire and complete ID signal code an Authorized Mazda Dealer, or the tire registration. pressure sensors may be damaged. The wheels equipped on your Mazda are…
• Page 316
  For purchase of a tire pressure sensor and registration of the tire pressure sensor ID signal code, consult an Authorized Mazda Dealer. When reinstalling a previously removed • tire pressure sensor to a wheel, replace the grommet (seal between valve body/ sensor and wheel) for the tire pressure sensor.

• Page 317: Diesel Particulate Filter

  When flashing If the vehicle is driven at 15 km/h (9 • Contact an Authorized Mazda Dealer. mph) or less continuously. Refer to Warning/Indicator Lights on page If the vehicle is repeatedly driven for a •…

• Page 318
  SCR warning light turns on/flashes. Refer to Selective Catalytic Reduction (SCR) System Indications on page 4-170. In this case, consult an Authorized Mazda Dealer. If DEF needs to be replenished, add DEF following the specified procedure. Refer to Diesel Exhaust Fluid (DEF) Replenishment on page 6-31.
• Page 319
  0 km (0 miles). The following indications are displayed when there is a problem with the SCR system/DEF. If there is a problem with the SCR system/DEF, consult an Authorized Mazda Dealer. SCR warn-…
• Page 320
  When Driving Selective Catalytic Reduction (SCR) System SCR warn- Multi-information Driving restric- Status Warning sound ing light display indication tion DEF has been replen- ished over the specified ― Turns on None amount 4-172 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 321: Rear View Monitor

  If the camera temperature changes rapidly (Hot to cold, cold to hot), the rear view • monitor may not operate correctly. When replacing the tires, consult an Authorized Mazda Dealer. Replacing the tires could • result in deviation of the guide lines which appear on the display.

• Page 322
  Authorized Mazda Dealer to have the vehicle inspected. If “No Video Signal Available” is indicated in the display, there could be a problem with • the camera. Have your vehicle inspected at an Authorized Mazda Dealer. ▼ Rear View Parking Camera Location Rear view parking camera ▼…
• Page 323
  When Driving Rear View Monitor ▼ Displayable Range on the Screen The images on the screen may be different from the actual conditions. (Screen display) Garnish Bumper (Actual view) Object NOTE The displayable range varies depending on the vehicle and road conditions. •…
• Page 324
  When Driving Rear View Monitor ▼ Viewing the Display Guide lines which indicate the width of the vehicle (yellow) are displayed on the screen as a reference to the approximate width of the vehicle in comparison to the width of the parking space you are about to back into.
• Page 325
  When Driving Rear View Monitor 1. Shift the shift lever/selector lever to R to switch the display to the rear view monitor display. 2. Confirming the surrounding conditions, reverse the vehicle. (Display condition) (Vehicle condition) 3. After your vehicle begins entering the parking space, continue backing up slowly so that the distance between the vehicle width lines and the sides of the parking space on the left and right are roughly equal.
• Page 326
  When Driving Rear View Monitor NOTE If the parking space has division lines, straighten the wheels when the vehicle width • guide lines are parallel to them. Because there may be a difference between the displayed image, such as indicated •…
• Page 327
  When Driving Rear View Monitor ▼ Variance Between Actual Road Conditions and Displayed Image Some variance occurs between the actual road and the displayed road. Such variance in distance perspective could lead to an accident. Note the following conditions that may cause a variance in distance perspective.
• Page 328
  When Driving Rear View Monitor Three-dimensional object on vehicle rear Because the distance guide lines are displayed based on a flat surface, the distance to the three-dimensional object displayed on the screen is different from the actual distance. (Screen display) (Actual condition) (Actual distance) B>C=A Sensed distance on screen A>B>C…

• Page 329: Interior Features

  Interior Features Use of various features for ride comfort, including air-conditioning and audio system. Climate Control System….5-4 Audio Set [Type B Operating Tips……5-4 (touchscreen)]……..5-65 Vent Operation……5-5 Basic Operation Method…..5-65 Manual Type……… 5-7 Home screen……. 5-69 Fully Automatic Type….5-11 Volume/Display/Sound Controls……..

• Page 330
  Interior Equipment……. 5-131 Sunvisors……..5-131 Interior Lights……5-132 Accessory Sockets….5-134 USB Power Outlet ….5-135 Cup Holder……. 5-136 Bottle Holder……5-137 Storage Compartments….. 5-138 *Some models. CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 331
  MEMO CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 332: Climate Control System

  • snow and ice from the hood and the air For details, consult an Authorized inlet in the cowl grille to improve the Mazda Dealer. system efficiency. Type A Use the climate control system to defog •…

• Page 333
  Interior Features Climate Control System Center Vents Vent Operation Knob ▼ Adjusting the Vents Directing airflow To adjust the direction of airflow, move the adjustment knob. Rear Vents NOTE When using the air conditioner under Knob Dial • Open humid ambient temperature conditions, the system may blow fog from the vents.
• Page 334
  Interior Features Climate Control System ▼ Selecting the Airflow Mode Dashboard Vents Defroster and Floor Vents Defroster Vents Dashboard and Floor Vents Floor Vents * With rear vents NOTE The location airflow exits the air vents and the airflow amount may change depending on the open or close status of the air vents.
• Page 335
  Interior Features Climate Control System Manual Type Temperature control dial Fan control dial Mode selector dial A/C switch Rear window defogger switch Air intake selector switch ▼ Control Switches NOTE The mode selector dial can be set at the Temperature control dial •…
• Page 336
  Interior Features Climate Control System Air intake selector ▼ Heating This switch controls the source of air 1. Set the mode selector dial to the entering the vehicle. position. 2. Set the air intake selector to the outside Outside or recirculated air positions can be air position (indicator light turns off).
• Page 337
  Interior Features Climate Control System ▼ Windshield Defrosting and CAUTION Defogging If the air conditioner is used while driving 1. Set the mode selector dial to the up long hills or in heavy traffic, monitor the position. high engine coolant temperature warning 2.
• Page 338
  Interior Features Climate Control System ▼ Dehumidifying Operate the air conditioner in cool or cold weather to help defog the windshield and side windows. 1. Set the mode selector dial to the desired position. 2. Set the air intake selector to the outside air position (indicator light turns off).
• Page 339
  Interior Features Climate Control System Fully Automatic Type Climate control system information is displayed on the display. Temperature setting display (driver’s side) Windshield defroster switch Air intake selector Driver temperature control dial Rear window defogger switch (recirculated air position) A/C mode display Air intake selector Passenger temperature (outside air position)
• Page 340
  Interior Features Climate Control System When the DUAL switch is off: NOTE • Turn the driver temperature control dial With the airflow mode set to the • to control the temperature throughout position and the temperature control the entire cabin. dial set at a medium temperature, When the DUAL switch is on: •…
• Page 341
  Interior Features Climate Control System Windshield defroster switch Recirculated air position ( Outside air is shut off. Use this position Press the switch to defrost the windshield and front door windows. when going through tunnels, driving in congested traffic (high engine exhaust Refer to Windshield Defrosting and areas) or when quick cooling is desired.
• Page 342
  Interior Features Climate Control System ▼ Windshield Defrosting and ▼ Sunlight/Interior Temperature Defogging Sensor Press the windshield defroster switch. Sunlight sensor In this position, the outside air position is Do not place objects on the sunlight automatically selected, and the air sensor.
• Page 343
  Interior Features Before Using the Audio System ▼ Seek Switch Audio Control Switch AM/FM radio Press the seek switch ( , ). The radio switches to the next/previous stored station in the order that it was stored. Press and hold the seek switch ( , ) to seek all usable stations at a higher or lower frequency whether programmed or not.
• Page 344
  NOTE (Type B) The SD card slot is for the navigation system. For vehicles with the navigation system, the SD card (Mazda genuine) with stored map data is inserted into the SD card slot and used. Type A Auxiliary jack/USB port…
• Page 345
  Interior Features Before Using the Audio System Type B CAUTION Depending on the portable audio device, noise may occur when the device is connected to the vehicle accessory socket. (If noise occurs, do not use the accessory socket.) NOTE Auxiliary jack USB port This mode may not be usable depending •…
• Page 346
  Interior Features Before Using the Audio System ▼ How to connect USB port/Auxiliary 2. If there is a cover on the auxiliary jack jack or USB port, remove the cover. (Type Type A 3. Connect the device plug/connector cable to the auxiliary jack/USB port. USB port Auxiliary jack Pass the device plug/connector cable…
• Page 347
  Interior Features Before Using the Audio System Antenna Antenna 5-19 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 348
  Interior Features Audio Set [Type A (non-touchscreen)] Power/Volume/Sound Controls Audio display Menu button Power/Volume/Audio control dial ▼ Power ON/OFF Setting value Turn Indication Switch the ignition to ACC or ON. Press Turn Counter- Clockwise the power/volume dial to turn the audio clockwise system on.
• Page 349
  Interior Features Audio Set [Type A (non-touchscreen)] NOTE If not operated for several seconds, the display returns to the previous display. To reset bass, treble, fade, and balance, press the menu button ( ) for 2 seconds. The unit will beep and “CLEAR” will be displayed.
• Page 350
  Interior Features Audio Set [Type A (non-touchscreen)] Clock :00 button Audio control dial Audio display Clock button Menu button Hour/Minute set switch ▼ Setting the time ▼ Time resetting The clock can be set at any time when the 1. Press the clock button ( ) for ignition is switched to ACC or ON.
• Page 351
  Interior Features Audio Set [Type A (non-touchscreen)] Operating the Radio Audio display Channel preset buttons Tuning button Scan button Auto memory button Band selector button ▼ Radio ON Manual tuning Select the station by pressing the tuning Press a band selector button ( ) to button ( , ) lightly.
• Page 352
  Interior Features Audio Set [Type A (non-touchscreen)] Preset channel tuning How to use AUX mode The 6 preset channels can be used to store 1. Switch the ignition to ACC or ON. 6 AM and 12 FM stations. 2. Press the power/volume dial to turn the 1.
• Page 353
  Interior Features Audio Set [Type A (non-touchscreen)] How to use USB mode Random button Audio display Repeat button Text button Play/Pause button Folder up button Track down/Reverse button Media/Scan button Track up/Fast-forward button Folder down button Playback of the USB device is in the Type Playable data •…
• Page 354
  Interior Features Audio Set [Type A (non-touchscreen)] Track search Folder repeat Press the track up button ( ) once to skip 1. Press the repeat button (1) during forward to the beginning of the next track. playback, and then press the button Press the track down button ( ) within a again within 3 seconds to play the few seconds after playback begins to track…
• Page 355
  Interior Features Audio Set [Type A (non-touchscreen)] ▼ Switching the display Display scroll Only 13 characters can be displayed at one The information displayed on the audio time. To display the rest of the characters display changes as follows each time the of a long title, press and hold the text text button (3) is pressed during playback.
• Page 356
  Interior Features Audio Set [Type A (non-touchscreen)] How to use iPod mode Audio display Text button Play/Pause button Random button Category down button Repeat button Category up button Track down/Reverse button List up button Track up/Fast-forward button Media/Scan button List down button An iPod may not be compatible depending Do not remove the iPod while in the •…
• Page 357
  Interior Features Audio Set [Type A (non-touchscreen)] Track search Music scan Press the track up button ( ) once to skip This function scans the titles in a list forward to the beginning of the next track. currently being played and plays 10 Press the track down button ( ) within a seconds of each song to aid you in finding few seconds (depends on iPod software…
• Page 358
  Interior Features Audio Set [Type A (non-touchscreen)] Album random Display scroll 1. Press the random button (2) during 13 characters can be displayed at one time. playback, and then press the button To display the rest of the characters of a again within 3 seconds to play the long title, press and hold the text button tracks in the iPod randomly.
• Page 359
  If you see an error indication on the display, take appropriate action according to the following methods. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer. CHECK USB When the message “CHECK USB” is displayed, it indicates that there is some error in the USB device.
• Page 360
  • connected. CAUTION ® Some Bluetooth mobile devices are not compatible with the vehicle. Consult an Authorized Mazda Dealer, Mazda’s call center or Web support center for information regarding ® Bluetooth mobile device compatibility: U.S.A. Phone: 800-430-0153 Web: www.mazdausa.com/mazdaconnect Canada…
• Page 361
  Interior Features Audio Set [Type A (non-touchscreen)] Mexico Center of Attention to Client (CAC) Phone: 01-800-01-MAZDA Web: www.mazdamexico.com.mx ® Applicable Bluetooth specification (Recommended) Ver. 2.0 ▼ Component Parts Audio unit Talk button, Pick-up button and Hang-up button Talk button Pick-up button…
• Page 362
  Interior Features Audio Set [Type A (non-touchscreen)] Hang-up button Ends the call or refuses an incoming call. In addition, it ends the voice recognition operation. Volume adjustment The power/volume dial of the audio unit is used to adjust the volume. Turn the dial to the right to increase volume, to the left to decrease it.
• Page 363
  Interior Features Audio Set [Type A (non-touchscreen)] 16. If “Yes”, the system switches to the ® Bluetooth Preparation device registration mode. If “No”, the system returns to standby status. ▼ Bluetooth ® Hands-Free Preparation ® ▼ Device pairing (Bluetooth Pairing code setting Hands-Free) The 4-digit pairing code setting for ®…
• Page 364
  If this occurs, For the operation of the device, refer repeat the entire process from Step 1. to its instruction manual. 10. Select “Mazda” from the device list Registered device read-out searched by the device. ®…
• Page 365
  Interior Features Audio Set [Type A (non-touchscreen)] 7. Prompt: “XXXXX…, XXXXX…, ▼ Device selection (Bluetooth ® XXXXX… (Ex. Device A, device B, Hands-Free) device C)” (The voice guidance reads If several devices have been paired, the out the device tags registered to the ®…
• Page 366
  Interior Features Audio Set [Type A (non-touchscreen)] (Music player) ▼ Deleting a device (Bluetooth ® Hands-Free) 1. Press the pick-up button or talk button with a short press. Registered devices (Mobile phone) can be 2. Say: [Beep] “Setup” deleted individually or collectively. 3.
• Page 367
  Interior Features Audio Set [Type A (non-touchscreen)] 11. Prompt: “Deleted” ▼ Bluetooth ® Audio Preparation ▼ Registered device editing ® Bluetooth audio device set-up ® (Bluetooth Hands-Free) ® Bluetooth audio pairing, changes, 1. Press the pick-up button or talk button deletions, and display of paired device with a short press.
• Page 368
  Interior Features Audio Set [Type A (non-touchscreen)] 2. Turn the audio control dial and select a NOTE desired mode. ® If a Bluetooth device has already been • paired to the vehicle as a hands-free mobile phone, it does not need to be paired again when using the device as a ®…
• Page 369
  Interior Features Audio Set [Type A (non-touchscreen)] NOTE ® 3. Input the PIN code of your Bluetooth audio device by pressing channel ® Some Bluetooth audio devices need • preset buttons 1 to 4 while “PIN 0000” a certain amount of time before the is displayed.
• Page 370
  Interior Features Audio Set [Type A (non-touchscreen)] ® ▼ Device selection (Bluetooth ® 4. Operate the Bluetooth audio device Audio) and set it to the pairing mode while If several devices have been paired, the “PAIRING” is flashing. ® Bluetooth unit links the device last ®…
• Page 371
  Interior Features Audio Set [Type A (non-touchscreen)] 4. Turn the audio control dial to select the 5. Press the audio control dial to select name of the device you would like to the device you would like to link. The link.
• Page 372
  Interior Features Audio Set [Type A (non-touchscreen)] How to confirm the device currently NOTE Only the names of paired devices can linked be displayed. If only one device is Switch to the link-change mode. (Refer to paired, only the name for this device is ®…
• Page 373
  Interior Features Audio Set [Type A (non-touchscreen)] ▼ Bluetooth ® Available Language audio device information display The available languages are English, 1. Using the audio control dial, select the Spanish, and Canadian French. If the pair device information display mode language setting is changed, all of the “DEVICE INFO”…
• Page 374
  Interior Features Audio Set [Type A (non-touchscreen)] 7. Prompt: “French (Desired language) Security Setting selected. Is this correct?” 8. Say: [Beep] “Yes” If a passcode is set, the system cannot be 9. Prompt: “French (Desired language) activated unless the passcode is input. selected”…
• Page 375
  Interior Features Audio Set [Type A (non-touchscreen)] 4. If the correct passcode is input, voice (Ex. “Calling John’s device. Is this guidance “XXXXXX… (Ex. “Mary’s correct?”) device”) (Device tag) is connected” is When the confirmation prompt function is announced. turned off: If the passcode is incorrect, voice (Ex.
• Page 376
  Interior Features Audio Set [Type A (non-touchscreen)] If a general mobile phone device is USB ® Bluetooth Audio • connected during music playback over ® the Bluetooth connection, the ® Applicable Bluetooth specification ® Bluetooth connection is disconnected. (Recommended) Ver. 2.0 For this reason, you cannot have music ®…
• Page 377
  Interior Features Audio Set [Type A (non-touchscreen)] If the current device version is lower Reverse than AVRCP Ver. 1.3: “BT Audio” is Press and hold the reverse down button displayed. If the current device is AVRCP Ver. 1.3: The playback time is displayed. ▼…
• Page 378
  Interior Features Audio Set [Type A (non-touchscreen)] ▼ Bluetooth ® audio device information ® Bluetooth Hands-Free display ▼ Making a Call ® If a Bluetooth audio device is connected, the following information is displayed in Phonebook Usage the audio display. Telephone calls can be made by saying the name of a person (voice tag) whose phone AVRCP Ver.
• Page 379
  Interior Features Audio Set [Type A (non-touchscreen)] 2. Say: [Beep] “Phonebook” (Telephone number correction) 3. Prompt: “Select one of the following: Say, “Go Back”. The prompt replies, New entry, edit, list names, delete, “Go Back. The last entered numbers erase all or import contact.” have been removed.”.
• Page 380
  Interior Features Audio Set [Type A (non-touchscreen)] 8. Say: [Beep] “XXXXX… (Ex. “Mary’s 8. Say: [Beep] “Home” (Say the phone”)” (Say a voice tag for the name registered location to be edited: registered.) “Home”, “Work”, “Mobile”, or 9. Prompt: “Adding XXXXX… (Ex. “Other”.) “Mary’s phone”) (Voice tag).
• Page 381
  Interior Features Audio Set [Type A (non-touchscreen)] Phonebook data deletion NOTE Do this function only when parked. It is (Erasing individual phonebook data) too distracting to attempt while driving Individual data registered to the and you may make too many errors to be ®…
• Page 382
  Interior Features Audio Set [Type A (non-touchscreen)] 5. Prompt: “XXXXX…, XXXXX…, Telephone Number Input XXXXX… (Ex. “John’s phone”, NOTE Mary’s phone, Bill’s phone)” (Voice Practice this while parked until you are guidance reads out the voice tags confident you can do it while driving in a registered to the phonebook.) non-taxing road situation.
• Page 383
  Interior Features Audio Set [Type A (non-touchscreen)] NOTE ▼ Mute The “Dial” command and a telephone The microphone can be muted during a number can be combined. call. Ex. In Step 2, say, “Dial 123-4567” then, 1. Press the talk button with a short press. Steps 3 and 4 can be skipped.
• Page 384
  Interior Features Audio Set [Type A (non-touchscreen)] ▼ Call interrupt Making a call using a telephone number 1. Press the talk button with a short press. A call can be interrupted to receive an 2. Say: [Beep] “Dial” incoming call from a third party. 3.
• Page 385
  Interior Features Audio Set [Type A (non-touchscreen)] Redialing function Voice Recognition 1. Press the talk button with a short press. In this section, the basic operation of the 2. Say: [Beep] “Redial” voice recognition is explained. 3. Prompt: “Dialing” Activating Voice Recognition Ending the current call To Activate the Main Menu: Press the Press the hang-up button during the call.
• Page 386
  Interior Features Audio Set [Type A (non-touchscreen)] Commands useable anytime during Speak clearly, without pausing between • voice recognition words or numbers. Close the windows to reduce loud noises • “Help” or “Go Back” are commands from outside the vehicle, or turn down which can be used at anytime during voice the airflow of the climate control system recognition.
• Page 387
  Interior Features Audio Set [Type A (non-touchscreen)] 5. The voice guidance reads out the voice Voice Recognition input command number (refer to the Learning Function voice input command list for voice (Speaker Enrollment) recognition learning). (Ex. “Please read phrase 1”) The voice recognition learning function 6.
• Page 388
  Interior Features Audio Set [Type A (non-touchscreen)] 8. Say: [Beep] “0123456789” (Say the NOTE voice input command for voice The applicable phrase appears in the • recognition learning (1 to according audio display. to the voice guidance.) After user voice registration is •…
• Page 389
  Unable to perform pairing ― turned on. If pairing is still not pos- sible after this, contact an Author- ized Mazda Dealer or Mazda Blue- ® tooth Hands-Free Customer Serv- ice. Perform pairing using the following procedure.
• Page 390
  If you pair your phone which has already been paired to your vehicle more than once in • the past, you need to delete “Mazda” on your mobile device. Then, execute the ® Bluetooth search on your mobile device once again, and pair to a newly detected “Mazda”.
• Page 391
  Interior Features Audio Set [Type A (non-touchscreen)] Voice recognition related problems Symptom Cause Solution method Poor voice recognition Excessive, slow speech. • Excessive, forceful speech (shout- • ing). Regarding the causes indicated on Speaking before the beep sound • the left, be careful with how you has ended.
• Page 392
  Interior Features Audio Set [Type A (non-touchscreen)] Regarding problems with calls Symptom Cause Solution method For about three seconds after start- ® ing a call, the Bluetooth unit’s When starting a call, vehicle noise This does not indicate a problem Noise Suppression function requires from the other party can be heard with the device.
• Page 393
  Interior Features Audio Set [Type B (touchscreen)] Basic Operation Method NOTE The explanation of functions described in this manual may differ from the actual operation, and the shapes of screens and buttons and the letters and characters displayed may also differ from the actual appearance.
• Page 394
  Interior Features Audio Set [Type B (touchscreen)] Switches around commander knob The following operations can be done by pressing the switches around the commander knob. : Displays the home screen. : Displays the Entertainment screen. : Displays the Navigation screen (Only navigation-equipped vehicles). For operation of the Navigation screen, refer to the navigation system manual.
• Page 395
  Interior Features Audio Set [Type B (touchscreen)] ▼ Touch panel operation CAUTION Do not press the screen strongly or press it with a sharp-pointed object. Otherwise, the screen could be damaged. NOTE For safety reasons, operation of the center display is disabled while the vehicle is being driven.
• Page 396
  Interior Features Audio Set [Type B (touchscreen)] Slide (USB audio only) 1. Touch the setting item displaying a slider bar. 2. Touch the slider with your finger and move to the desired level. Swipe 1. Touch the screen with your finger and move up or down. 2.
• Page 397
  Interior Features Audio Set [Type B (touchscreen)] Home screen Icon Function Applications Information such as average fuel economy, maintenance, and warnings can be verified. Depending on the grade and specification, the screen display may differ. Entertainment Operates audio such as the radio. The audio source most recently used is displayed. An audio source which cannot be used at that time is skipped and the previous audio source is displayed.
• Page 398
  Interior Features Audio Set [Type B (touchscreen)] Volume/Display/Sound Controls Audio control switch Commander switch Volume dial Volume switch ▼ Volume adjustment : Switches screen automatically according to headlight illumination Turn the commander switch volume dial. condition The volume switch on the steering switch : Daytime screen setting can also be pressed.
• Page 399
  Interior Features Audio Set [Type B (touchscreen)] ▼ Audio sound adjustment ® Bose Centerpoint (Automatic surround level adjustment) Select the icon on the home screen to ®*3 Centerpoint lets vehicle owners enjoy a display the Settings screen. ® Bose surround sound experience from Select the tab to select the item you their existing MP3s and satellite radio.
• Page 400
  Interior Features Audio Set [Type B (touchscreen)] Operating the Radio ▼ Radio ON Select the icon on the home screen to display the Entertainment screen. When selecting the desired radio, the following icons are indicated in the lower part of the center display. AM/FM Radio Icon Function…
• Page 401
  Interior Features Audio Set [Type B (touchscreen)] ▼ Radio Broadcast Data System 1. Select the icon to display the (RBDS) Favorites list. 2. Select Radio text information display 3. Select Radio text information sent from a 4. The station is added to the bottom of broadcasting station is displayed in the the Favorites list.
• Page 402
  Interior Features Audio Set [Type B (touchscreen)] Ex.) ▼ HD Radio 89.3 is currently being received. With What is HD Radio™ Technology and Rock selected as the Genre, the radio how does it work? stations broadcasting Rock are at the following frequencies.
• Page 403
  Interior Features Audio Set [Type B (touchscreen)] Multicast channel selection (FM) iTunes Tagging (for Apple devices with USB use only) If multi-cast channels are available for an broadcast currently being By tagging a song currently being aired, received, the multi-cast channel list is the song can later be purchased from the displayed.
• Page 404
  (some Satellite Radio brings you more of what areas of the United States and Canada). you love. Get channels and channels of Contact Authorized Mazda Dealer for commercial-free music, plus sports, news, details. talk, entertainment and more.
• Page 405
  Interior Features Audio Set [Type B (touchscreen)] ▼ Displaying the Radio ID (ESN) When channel 0 is selected, the radio ID is displayed. Use the PREVIOUS or NEXT channel buttons to select channel 0. 5-77 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 406
  Interior Features Audio Set [Type B (touchscreen)] ▼ SiriusXM operation Select the icon on the home screen to display the Entertainment screen. When selected, the following icons are indicated in the bottom part of the center display. Icon Function Displays the Entertainment menu. Use to switch to a different audio source. Displays the channel list of the current category.
• Page 407
  Interior Features Audio Set [Type B (touchscreen)] PIN code reset If the registered code has been forgotten, reset the code to the default [0000] code. 1. Select the icon. 2. If the selected channel is locked, input the PIN code to cancel the parental lock temporarily.
• Page 408
  Interior Features Audio Set [Type B (touchscreen)] How to use AUX mode ▼ Playback 1. Select the icon on the home screen to display the Entertainment screen. 2. Select to switch to the AUX mode. The following icons are displayed in the lower part of the center display.
• Page 409
  Interior Features Audio Set [Type B (touchscreen)] How to use USB mode Type Playable data USB mode MP3/WMA/AAC/OGG file This unit does not support a USB 3.0 device. In addition, other devices may not be supported depending on the model or OS version. The recommended capacity of the USB memory is 16 GB or less.
• Page 410
  Interior Features Audio Set [Type B (touchscreen)] Icon Function Displays sound settings to adjust audio quality level. Refer to Volume/Display/Sound Controls on page 5-70. NOTE If a file name in the USB memory is too long, it could cause operation problems such as •…
• Page 411
  Interior Features Audio Set [Type B (touchscreen)] (Method 2) 1. Select to display the category list. 2. Select All the folders in the USB device are displayed. 3. Select All the tracks in the USB device are displayed. 4. Select a desired track. The selected track is played.
• Page 412
  ® For information related to the most recent Gracenote database which can be used and how to install it, go to the Mazda Hands Free Website: http://www.mazdahandsfree.com Introduction Gracenote, the Gracenote logo and logotype are either a registered trademark or a trademark of Gracenote, Inc.
• Page 413
  Interior Features Audio Set [Type B (touchscreen)] You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers.
• Page 414
  . The list of the update package stored in the USB device and the version are displayed. 5. Select the package to use the update. 6. Select NOTE ® Gracenote can be downloaded from the Mazda Hands-free Website. 5-86 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 415
  CAUTION ® Some Bluetooth mobile devices are not compatible with the vehicle. Consult an Authorized Mazda Dealer, Mazda’s call center or Web support center for information regarding ® Bluetooth mobile device compatibility: U.S.A.
• Page 416
  Interior Features Audio Set [Type B (touchscreen)] Canada Phone: 800-430-0153 Web: www.mazdahandsfree.ca Mexico Center of Attention to Client (CAC) Phone: 01-800-01-MAZDA Web: www.mazdamexico.com.mx ® Applicable Bluetooth specification (Recommended) Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 (conformity) ▼ Component Parts Audio unit Talk button, Pick-up button and Hang-up button…
• Page 417
  Interior Features Audio Set [Type B (touchscreen)] Hang-up button Ends the call or refuses an incoming call. In addition, it ends the voice recognition operation. Commander switch The commander switch is used for volume adjustment and display operation. Tilt or turn the commander knob to move the cursor.
• Page 418
  Bluetooth device (Peripheral to be paired to the unit using the following device). procedure. A maximum of seven devices 7. Select “Mazda” from the device list ® including Bluetooth audio devices and searched by the device. hands-free mobile phones can be paired.
• Page 419
  Hands-free or audio. If pairing is redone on the same • mobile phone device, first clear Hands-free: Phone calls and • ® “Mazda” displayed on the Bluetooth E-mail/SMS setting screen of the mobile device. ® ® Audio: Bluetooth audio, Pandora •…
• Page 420
  Interior Features Audio Set [Type B (touchscreen)] ▼ Deleting a device Available Language Selecting and deleting devices ® The Bluetooth Hands-Free System applies to the following languages: 1. Select the icon on the home screen to display the Settings screen. English •…
• Page 421
  Interior Features Audio Set [Type B (touchscreen)] ® Bluetooth Audio AVRCP Function A2DP Ver. Ver. Ver. ® Applicable Bluetooth specification (Recommended) pends pends Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 Shuffle — — on de- on de- (conformity) vice vice Response profile pends pends A2DP (Advanced Audio Distribution Scan…
• Page 422
  Interior Features Audio Set [Type B (touchscreen)] ▼ Switching to Bluetooth ® audio mode ® To listen to music or voice audio recorded to a Bluetooth audio device, switch to the ® Bluetooth audio mode to operate the audio device using the audio system control panel. ®…

• Page 423: Information Display

  Interior Features Audio Set [Type B (touchscreen)] Icon Function (AVRCP Ver. 1.3 or higher) Plays songs in the folder in random order. When selected again, the songs on the device are played in random order. Select it again to cancel. Icons change during folder shuffle or device shuffle.

• Page 424
  Interior Features Audio Set [Type B (touchscreen)] ® How to Use Pandora ▼ What is Pandora ® ®*1 Pandora is free personalized Internet radio. Simply enter a favorite artist, track, genre, ® and Pandora will create a personalized station that plays their music and more like it. Rate songs by giving thumbs-up and thumbs-down feedback to further refine your station, ®…
• Page 425
  Interior Features Audio Set [Type B (touchscreen)] Icon Function Displays sound settings to adjust audio quality level. Refer to Volume/Display/Sound Controls on page 5-70. NOTE The skip function may not be available depending on the device. • ® The number of skips is limited by Pandora •…
• Page 426
  Interior Features Audio Set [Type B (touchscreen)] How to Use Aha™ ▼ What is Aha™? Aha™ is an application which can be used to enjoy various Internet content such as Internet radio and podcasts. Stay connected to your friends activities by getting updates from Facebook and Twitter. Using the location-based service, nearby services and destinations can be searched or real-time local information can be obtained.

• Page 427: Main Menu

  Interior Features Audio Set [Type B (touchscreen)] Icon Function Dislike Evaluates the current content as “Dislike”. Reverses for 15 seconds. Map (vehicles with navigation system) Displays the destination searched by the location based services on the navigation system. Call A call can be made to the telephone number of a shop searched using the Location Based Services.

• Page 428
  Interior Features Audio Set [Type B (touchscreen)] Function Select the desired station. Guidance is provided to the searched destination near the vehicle’s posi- Nearby tion. You can designate desired categories previously set using the filter setting on your device. NOTE The available Location Based Services may differ because the services depend on the content provided by Aha™.
• Page 429
  Interior Features Audio Set [Type B (touchscreen)] How to Use Stitcher™ Radio ▼ What is Stitcher™ Radio? Stitcher™ radio is an application which can be used to listen to Internet radio or stream podcasts. Recommended content is automatically selected by registering content which you put into your favorites, or by pressing the Like or Dislike button.
• Page 430
  Interior Features Audio Set [Type B (touchscreen)] Icon Function Goes to the next station. Displays sound settings to adjust audio quality level. Refer to Volume/Display/Sound Controls on page 5-70. Station list 1. Select the icon to display the station list. Favorites station name: Select to display the program registered to your favorites.
• Page 431
  ▼ Making a Call 4. Select the desired phone number to For Mazda Connect, making calls is make the call. possible using any of the following six Import contact (Download Phonebook) methods:…
• Page 432
  Interior Features Audio Set [Type B (touchscreen)] NOTE 2. Select to display the favorites list. If “Import All Contacts” is performed • 3. (If only one phone number is after saving the phonebook to the registered to contact) ® Bluetooth unit, the phonebook will be Select the contact information you overwritten.
• Page 433
  Though the system can be set to not call 2. When is pressed, the dial pad 911, doing so will defeat the purpose of the is displayed. system. Mazda recommends that the 3. Input the telephone number using the Mobile 911 system remain activated. dial pad. 4. Select to make the call.
• Page 434
  Interior Features Audio Set [Type B (touchscreen)] NOTE Mobile 911 is a secondary function of • the audio entertainment system. Therefore, the mobile 911 function does not assure that the call is always made to 911 after an accident occurs. A Hands-free device must be paired and •…

• Page 435: Receiving An Incoming Call

  Interior Features Audio Set [Type B (touchscreen)] ▼ Receiving an Incoming Call When an incoming call is received, the incoming call notification screen is displayed. The “Incoming Call Notifications” setting must be on. Refer to Communication Settings on page 5-113. To accept the call, press the pick-up button on the audio control switch or select the screen.

• Page 436
  Interior Features Audio Set [Type B (touchscreen)] NOTE If the ignition is switched off during a • hands-free call, the line is transferred to the device (Mobile phone) automatically. If the DTMF code has two or more • digits or symbols, each one must be transmitted individually.
• Page 437
  Interior Features Audio Set [Type B (touchscreen)] ▼ Call Interrupt ▼ Receiving and Replying to Messages (available only with E-mail/SMS A call can be interrupted to receive an compatible phones) incoming call from a third party. SMS (Short Message Service) messages, When is selected or the and E-mail received by connected devices…
• Page 438
  Interior Features Audio Set [Type B (touchscreen)] (Manually downloading) Receiving messages When the “Auto Download Email” (Method 1) (E-mail) or “Auto Download Text When a device receives a message, a Message” (SMS) setting is off, the message received notification is displayed. message is downloaded using the The “Email Notifications”…
• Page 439
  Interior Features Audio Set [Type B (touchscreen)] The following icons are displayed in the lower part of the details on the message. Icons which can be used differ depending on use conditions. Icon Function Displays the Communication menu. Displays the inbox. Plays back a message.
• Page 440
  Interior Features Audio Set [Type B (touchscreen)] Example of use (verify unread E-mail) Editing preset messages 1. Select the icon on the home screen 1. Select the icon on the home screen to display the Communication screen. to display the Communication screen. 2.
• Page 441
  Interior Features Audio Set [Type B (touchscreen)] ▼ Communication Settings Select the icon on the home screen to display the Communication screen. Select to change the setting. Item Setting Function ® Go to Bluetooth setting menu. ® Bluetooth — ® Refer to Bluetooth Preparation on page 5-90.
• Page 442
  Interior Features Audio Set [Type B (touchscreen)] To prevent a deterioration in the voice Voice Recognition recognition rate and voice quality, the following points should be observed: ▼ Basic Operation Method The voice recognition cannot be Activating Voice Recognition • performed while voice guidance or the Press the talk button.

• Page 443: Voice Command List

  Interior Features Audio Set [Type B (touchscreen)] ▼ Voice Command List Voice command When the talk button is pressed and the following command is spoken, the audio or navigation can be operated. The commands in the () can be omitted. The specified name and number are put into the {}.

• Page 444
  Interior Features Audio Set [Type B (touchscreen)] Corresponding audio Voice command Function source (Go to/Play) USB 2 Switches the audio source to USB 2. Play Playlist {Playlist name} Plays the selected playlist. Play Artist {Artist name} Plays the selected artist. Play Album {Album name} Plays the selected album.
• Page 445
  Interior Features Audio Set [Type B (touchscreen)] Settings NOTE Depending on the grade and specification, the screen display may differ. Select the icon on the home screen and display the Settings screen. Switch the tab and select the setting item you want to change. You can customize settings in the setup display as follows: Item Function…
• Page 446
  Interior Features Audio Set [Type B (touchscreen)] Item Function Tool Tips Turns button explanations ON/OFF. Language Changes the language. Changes the setting between Fahrenheit and Temperature Celsius. Changes the setting between miles and kilome- Distance ters. ® ® Used to update Gracenote .
• Page 447
  Interior Features Audio Set [Type B (touchscreen)] Applications NOTE Depending on the grade and specification, the screen display may differ. Select the icon on the home screen to display the Applications screen. The following information can be verified. Top screen Item Function HD Radio™…
• Page 448
  Turn off the power of the ® Bluetooth device once, then turn it back on. If pairing is still not possi- ble after this, contact an Authorized ® Mazda Dealer or Mazda Bluetooth Hands-Free Customer Service. 5-120 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 449
  Solution method Perform pairing using the following procedure: 1. Delete the applicable Blue- ® tooth device on the Mazda Connect. 2. Delete “Mazda” from the Blue- ® tooth search screen of the The pairing information paired to ® Bluetooth device.
• Page 450
  If you pair your phone which has already been paired to your vehicle more than once in • the past, you need to delete “Mazda” on your mobile device. Then, execute the ® Bluetooth search on your mobile device once again, and pair to a newly detected “Mazda”.
• Page 451
  Interior Features Audio Set [Type B (touchscreen)] Voice recognition related problems Symptom Cause Solution method Poor voice recognition Excessive, slow speech. • Excessive, forceful speech (shout- • ing). Regarding the causes indicated on Speaking before the beep sound • the left, be careful with how you has ended.
• Page 452
  Interior Features Audio Set [Type B (touchscreen)] Regarding problems with calls Symptom Cause Solution method For about three seconds after start- ® ing a call, the Bluetooth unit’s When starting a call, vehicle noise This does not indicate a problem Noise Suppression function requires from the other party can be heard with the device.
• Page 453
  Interior Features Appendix Do not spill any liquid on the audio Things You Need to Know system. WARNING Always adjust the audio while the vehicle is stopped: Do not adjust the audio control switches while driving the vehicle. Adjusting the ▼…
• Page 454
  Interior Features Appendix FM characteristics Multipath noise An FM broadcast range is usually about Since FM signals can be reflected by 40―50 km (25―30 miles) from the obstructions, it is possible to receive both source. Because of extra coding needed to the direct signal and the reflected signal at break the sound into two channels, stereo the same time.
• Page 455
  Interior Features Appendix Weak signal noise ▼ Operating Tips for MP3 In suburban areas, broadcast signals MP3 stands for MPEG Audio Layer 3, become weak because of distance from the which is standardized voice compression transmitter. Reception in such fringe areas established by the ISO working group is characterized by sound breakup.
• Page 456
  Interior Features Appendix The number of characters which can be ▼ Operating Tips for AAC • displayed is restricted. AAC stands for Advanced Audio Coding, ▼ Operating Tips for WMA which is standardized voice compression established by the ISO working group WMA is short for Windows Media (MPEG).
• Page 457
  Interior Features Appendix ▼ Operating Tips for OGG ▼ Operating Tips for USB device OGG is the audio compression format for This unit plays audio files as follows: Xiph. Org Foundation. Extension Playback with this unit Audio data can be created and stored at a .mp3 higher compression ratio than MP3.
• Page 458
  If data in the iPod is lost while it is connected to the unit, Mazda cannot guarantee recovery of any lost data. 5-130 CX-5_8GB6-EA-17G_Edition1…

• Page 459: Interior Equipment

  Interior Features Interior Equipment ▼ Vanity Mirrors Sunvisors To use the vanity mirror, lower the When you need a sunvisor, lower it for use sunvisor. in front or swing it to the side. If your vehicle is equipped with a vanity Sunvisor mirror light, it will illuminate when you open the cover.

• Page 460
  Interior Features Interior Equipment Front Map Lights Interior Lights When the overhead light switch is in the door or off position, press the lens to NOTE Do not leave the lights on for long periods illuminate the front map lights, and then while the engine is turned off.
• Page 461
  Interior Features Interior Equipment NOTE ▼ Illuminated Entry System Once the rear map lights have been The overhead lights turn on when any of • turned off, they will turn on and off the following operations is done with the depending on the position to which the overhead light switch in the DOOR overhead light is switched.
• Page 462
  Interior Equipment Center, Rear Accessory Sockets The accessory sockets can be used Only use genuine Mazda accessories or regardless of whether the ignition is on or the equivalent requiring no greater than off. 120 W (DC 12 V, 10 A).
• Page 463
  If the problem is not resolved, consult an Authorized USB power outlet Mazda Dealer. CAUTION NOTE To prevent discharging of the battery, do To prevent USB power outlets damage or…
• Page 464
  Interior Features Interior Equipment How to connect Cup Holder The groove in the armrest box can be used to pass the cord of the device into the box WARNING to connect it to the USB power outlets. 1. Open the lid. Never use a cup holder to hold hot liquids 2.
• Page 465
  Interior Features Interior Equipment ▼ Rear Bottle Holder The rear cup holder is on the rear center Bottle holders are on the inside of the armrest. doors. Front Bottle holder Rear Bottle holder CAUTION Do not use the bottle holders for containers without caps.
• Page 466
  Interior Features Interior Equipment ▼ Glove Compartment Storage Compartments To open the glove compartment, pull the latch toward you. WARNING Keep storage boxes closed when driving: Driving with the storage boxes open is dangerous. To reduce the possibility of injury in an accident or a sudden stop, keep the storage boxes closed when driving.
• Page 467
  Interior Features Interior Equipment ▼ Armrest Box To open, push the button and pull up the lid. 5-139 *Some models. CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 468
  Interior Features Interior Equipment ▼ Luggage Compartment Cargo Securing Loops WARNING Make sure luggage and cargo is secured before driving: Not securing cargo while driving is dangerous as it could move or be crushed during sudden braking or a collision and cause injury. Use the loops in the luggage compartment to secure cargo with a rope or net.
• Page 469
  Interior Features Interior Equipment NOTE Loading golf bags (Some golf bags may not fit using the following methods depending on their sizes.) Up to four golf bags can be carried in the luggage compartment. Bottom: Place the first and second golf bags in the luggage compartment with the bottoms pointed to the right.
• Page 470
  Interior Features Interior Equipment ▼ Rear Coat Hooks WARNING Never hang heavy or sharp objects on the assist grips and coat hooks: Hanging heavy or sharp-ended objects such as a coat hanger from the assist grips or coat hooks is dangerous as they can fly off and hit an occupant in the cabin if a curtain air bag was to deploy, which could result in serious injury or death.

• Page 471: Maintenance And Care

  Maintenance and Care How to keep your Mazda in top condition. Essential Information……6-2 Appearance Care……6-61 Introduction……..6-2 Exterior Care……6-61 Interior Care……..6-67 Scheduled Maintenance….6-4 Scheduled Maintenance (U.S.A., Canada, and Puerto Rico)….. 6-4 Scheduled Maintenance (Mexico)……..6-11 Maintenance Monitor….6-17 Owner Maintenance……6-19…

• Page 472: Essential Information

  If you are unsure about any procedure it describes, we strongly urge you to have a reliable and qualified service shop perform the work, preferably an Authorized Mazda Dealer. Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.

• Page 473
  If you elect to perform maintenance yourself or have your vehicle serviced at a location other than an Authorized Mazda Dealer, Mazda requires that all fluids, parts and materials must meet Mazda standards for durability and performance as described in this manual.

• Page 474: Scheduled Maintenance

  Maintenance and Care Scheduled Maintenance Scheduled Maintenance (U.S.A., Canada, and Puerto Rico) Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions (severe driving conditions)apply. Repeated short-distance driving • Driving in dusty conditions • Driving with extended use of brakes •…

• Page 475
  Maintenance and Care Scheduled Maintenance ▼ Schedule 1 U.S.A. and Puerto Rico residents — Engine oil flexible maintenance interval Use when the maintenance monitor for “Oil Change” is set to “Flexible”. For details, see maintenance monitor. (page 6-17) Number of months or kilometers (miles), whichever comes first. Months Maintenance Interval ×1000 km…
• Page 476
  If less than 6,400 km (4,000 miles) are driven per year (36 month: 19,200 km (12,000 miles), 72 months: 38,400 km (24,000 miles), …), replace DEF. Replace when glow indicator light is continuously ON. Authorized Mazda Dealer can replace all the glow plugs without charge if indicator light comes ON earlier than 240,000 km (150,000 miles).
• Page 477
  Maintenance and Care Scheduled Maintenance ▼ Schedule 2 U.S.A. and Puerto Rico residents — Severe driving conditions maintenance interval Number of months or kilometers (miles), whichever comes first. Months Maintenance Interval ×1000 km ×1000 miles SKYACTIV-G 2.0 AND SKYACTIV-G 2.5 Spark plugs Replace every 120,000 km (75,000 miles).
• Page 478
  If less than 6,400 km (4,000 miles) are driven per year (36 month: 19,200 km (12,000 miles), 72 months: 38,400 km (24,000 miles), …), replace DEF. Replace when glow indicator light is continuously ON. Authorized Mazda Dealer can replace all the glow plugs without charge if indicator light comes ON earlier than 240,000 km (150,000 miles).
• Page 479
  Maintenance and Care Scheduled Maintenance Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date. Canada residents Number of months or kilometers (miles), whichever comes first. Months Maintenance Interval ×1000 km…
• Page 480
  If less than 6,400 km (4,000 miles) are driven per year (36 month: 19,200 km (12,000 miles), 72 months: 38,400 km (24,000 miles), …), replace DEF. Replace when glow indicator light is continuously ON. Authorized Mazda Dealer can replace all the glow plugs without charge if indicator light comes ON earlier than 240,000 km (150,000 miles).
• Page 481
  Maintenance and Care Scheduled Maintenance Scheduled Maintenance (Mexico) Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions (severe driving conditions) apply. Repeated short-distance driving • Driving in dusty conditions • Driving with extended use of brakes •…
• Page 482
  According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or kilometer period to ensure long-term reliability.
• Page 483
  Maintenance and Care Scheduled Maintenance ▼ Schedule 2 Number of months or kilometers, whichever comes first Maintenance Interval Months ×1000 km ENGINE Drive belts Engine oil & filter COOLING SYSTEM Cooling system Replace at first 200,000 km or 10 years; after that, every Engine coolant 100,000 km or 5 years Engine coolant level…
• Page 484
  According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or kilometer period to ensure long-term reliability.
• Page 485
  Maintenance and Care Scheduled Maintenance Number of months or kilometers, whichever comes first Maintenance Interval Months ×1000 km 95 100 105 110 115 120 IGNITION SYSTEM Spark plugs Replace every 120,000 km ELECTRICAL SYSTEM Function of all lights CHASSIS and BODY Brake lines, hoses and connections Brake and clutch fluid level Brake fluid…
• Page 486
  Scheduled Maintenance According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or kilometer period to ensure long-term reliability.
• Page 487
  Maintenance and Care Scheduled Maintenance Maintenance Monitor ▼ Maintenance Monitor (Type A) Based on the engine operating conditions, the onboard computer in your vehicle calculates the remaining oil life in the United States and Puerto Rico. The wrench indicator light in the instrument cluster will be illuminated when remaining oil life becomes less than 1,000 km (600 mile), or remaining days are less than 15 (whichever comes first).
• Page 488
  Maintenance and Care Scheduled Maintenance You can customize settings in the setup display as follows: Item Explanation Setting Notification can be switched on/off. Time (months) Displays the time or distance until maintenance is due. Select this item to set the maintenance period. The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 Distance (km or mile)

• Page 489: Owner Maintenance

  The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.

• Page 490
  Maintenance and Care Owner Maintenance WARNING Do not perform maintenance work if you lack sufficient knowledge and experience or the proper tools and equipment to do the work. Have maintenance work done by a qualified technician: Performing maintenance work on a vehicle is dangerous if not done properly. You can be seriously injured while performing some maintenance procedures.
• Page 491
  Maintenance and Care Owner Maintenance 2. Insert your hand into the hood Hood opening, slide the latch lever to the right, and lift up the hood. WARNING Lever Always check that the hood is closed and securely locked: A hood that is not closed and securely locked is dangerous as it could fly open while the vehicle is moving and block the driver’s vision which could result in a…
• Page 492
  Maintenance and Care Owner Maintenance ▼ Closing the Hood 1. Check under the hood area to make certain all filler caps are in place and all loose items (e.g. tools, oil containers, etc.) have been removed. 2. Lift the hood, grasp the padded area on the support rod, and secure the support rod in the clip.
• Page 493
  Maintenance and Care Owner Maintenance Engine Compartment Overview SKYACTIV-G 2.0 and SKYACTIV-G 2.5 Windshield washer fluid reservoir Brake/Clutch fluid reservoir Engine oil-dipstick Battery Fuse block Cooling system cap Engine coolant reservoir Engine oil-filler cap SKYACTIV-D 2.2 Brake fluid reservoir Windshield washer fluid reservoir Engine oil-filler cap Battery Fuse block…
• Page 494
  –10 U.S.A. and CANADA SKYACTIV-G 2.0, SKYACTIV-G 2.5 –40 –20 Use SAE 0W-20 engine oil. Mazda Genuine Oil is used in your Mazda vehicle. Mazda Genuine 0W-20 Oil is required to achieve optimum fuel economy. SKYACTIV-D 2.2 For maintenance service, Mazda Use SAE 0W-30 engine oil.
• Page 495
  Maintenance and Care Owner Maintenance For maintenance service, Mazda For maintenance service, Mazda recommends Mazda Genuine Part. recommends Mazda Genuine Parts and ® Castrol (Mexico only). –40 –20 –30 –10 –40 –20 CAUTION SKYACTIV-D 2.2 uses specified oil. Please confirm the specification in owner’s manual.
• Page 496
  SKYACTIV-G 2.0 or SKYACTIV-G 2.5 which the engine oil flexible maintenance setting is selected. After replacing the engine oil, have a repair shop such as an Authorized Mazda Dealer perform the initialization (engine oil data resetting) of the recorded value. If the value recorded by the computer is not initialized, the wrench indicator light may not turn off or it may turn on earlier than normal.
• Page 497
  “X” mark on the dipstick, X Mark replace the engine oil. This should be done by an Authorized Mazda Dealer. When replacing the engine oil, inspect the oil level using the oil dipstick and refill so that the engine oil level is within the range between MIN and MAX as shown in the figure.
• Page 498
  Maintenance and Care Owner Maintenance NOTE Engine Coolant Changing the coolant should be done by an Authorized Mazda Dealer. ▼ Inspecting Coolant Level Inspect the antifreeze protection and WARNING coolant level in the coolant reservoir at least once a year―at the beginning of the winter season―and before traveling where…
• Page 499
  Radiator coolant will damage paint. brake/clutch system inspected by an Rinse it off quickly if spilled. Authorized Mazda Dealer. If the “FL22” mark is shown on or near the cooling system cap, use of FL-22 is recommended when replacing engine coolant.
• Page 500
  Maintenance and Care Owner Maintenance Inspect fluid level in the washer fluid Washer Fluid reservoir; add fluid if necessary. ▼ Inspecting Washer Fluid Level WARNING Use only windshield washer fluid or plain water in the reservoir: Using radiator antifreeze as washer fluid is dangerous.
• Page 501
  CAUTION container. If DEF gets on the painted surface or the Use a Mazda genuine product or a interior, wash it off with water or wipe it product conforming to ISO22241-1 for off with a wet cloth immediately.
• Page 502
  Replenishment of DEF by an Authorized • 2. Stop the vehicle on level ground. Mazda Dealer is recommended. If you 3. Switch the ignition OFF. want to replenish the DEF yourself, 4. Open the fuel-filler lid.
• Page 503
  Contact an Authorized Mazda Dealer if a warning is displayed. If the warning remains displayed, the urea tank may have a problem or it may be damaged.
• Page 504
  If the DEF level (%) shows no increase or the speed restriction does not cancel even while driving the vehicle, consult an Authorized Mazda Dealer. 6-34 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 505
  Maintenance and Care Owner Maintenance ▼ Replacing Windshield Wiper Blades Wiper Blades When the wipers no longer clean well, the blades are probably worn or cracked. CAUTION Replace them. Hot waxes applied by automatic car CAUTION washers have been known to affect the wiper’s ability to clean windows.
• Page 506
  Maintenance and Care Owner Maintenance 2. Slide the blade component in the 4. Pull the end of the blade rubber from direction of the arrow while pressing the blade holder groove in the direction the wiper arm tab to remove the blade of the arrow and remove the blade component from the wiper arm.
• Page 507
  Maintenance and Care Owner Maintenance 5. Insert the end of the new blade rubber 6. After pulling the blade rubber in the into the groove of the blade holder direction of the arrow and sliding the until it contacts the end of the blade blade rubber to a position to check the holder.
• Page 508
  Maintenance and Care Owner Maintenance 9. Align the blade component projection 1. Remove the cover and raise the wiper with the wiper arm notch. arm. Notch Projection 10. Slide the blade component and install 2. Firmly rotate the wiper blade to the it to the wiper arm.
• Page 509
  Maintenance and Care Owner Maintenance 3. Pull down the blade rubber and slide it out of the blade holder. 4. Remove the metal stiffeners from the blade rubber and install them in the new blade. CAUTION Do not bend or discard the stiffeners. You need to use them again.
• Page 510
  Maintenance and Care Owner Maintenance Battery WARNING Wash hands after handling the battery and related accessories: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Read the following precautions carefully before using the battery or inspecting to ensure safe and correct handling: Always wear eye protection when working near the battery:…
• Page 511
  • extended time, disconnect the battery cables and charge the battery every six weeks. ▼ Battery Replacement Contact an Authorized Mazda Dealer for a battery replacement purchase. To get the best service from a battery: Keep it securely mounted. •…
• Page 512
  When replacing the battery, be careful Replacing the battery at an Authorized not to touch any of the internal circuitry Mazda Dealer is recommended to prevent and electrical terminals, bend the damage to the key. If replacing the battery electrical terminals, or get dirt in the by yourself, follow the instruction.
• Page 513
  Maintenance and Care Owner Maintenance 2. Twist a tape-wrapped flathead 5. Remove the battery cap, then remove screwdriver in the direction of the the battery. arrow and open the cover slightly. Cover 3. Insert the tape-wrapped flathead screwdriver into the gap and slide it in CAUTION the direction of the arrow.
• Page 514
  Maintenance and Care Owner Maintenance 6. Insert a new battery with the positive Tires pole facing up, and then cover the battery with the battery cap. For reasons of proper performance, safety, and better fuel economy, always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribution.
• Page 515
  Maintenance and Care Owner Maintenance ▼ Tire Rotation Use only a Mazda-genuine tire valve cap: Use of a non-genuine part is dangerous as the correct tire air pressure cannot be WARNING maintained if the tire valve becomes damaged. If the vehicle is driven under this…
• Page 516
  Replacing just one tire is dangerous. It could cause poor handling and poor braking resulting in loss of vehicle control. Mazda strongly recommends that you replace all four tires at the same time. If a tire wears evenly, a wear indicator will appear as a solid band across the tread.
• Page 517
  Maintenance and Care Owner Maintenance ▼ Temporary Spare Tire NOTE Tires degrade over time, even when they Inspect the temporary spare tire at least are not being used on the road. It is monthly to make sure it is properly recommended that tires generally be inflated and stored.
• Page 518
  (inset/outset). For details, contact an Authorized • Mazda Dealer. Proper tire balancing provides the best riding comfort and helps reduce tread wear. Out-of-balance tires can cause vibration and uneven wear, such as cupping and flat spots.
• Page 519
  Maintenance and Care Owner Maintenance Light Bulbs Type A Rear map lights Side turn signal lights Brake lights/Taillights Overhead lights/Front map High-mount lights brake light Vanity mirror lights Daytime running lights/Parking Rear side-marker lights lights Brake lights Front side-marker lights Rear turn signal lights Headlights (High/Low beam) Reverse lights…
• Page 520
  Removal single unit because it is an integrated unit. The LED bulb has to be replaced with the unit. We recommend an Authorized Mazda Dealer when the replacement is necessary. Installation Front turn signal lights/Parking lights 1. Make sure the ignition is switched off, and the headlight switch is off.
• Page 521
  Maintenance and Care Owner Maintenance 4. Pull the center of each plastic retainer Rear turn signal lights, Brake lights/ using a flathead screwdriver and Taillights/Rear side-marker lights (Type remove the retainers, and then partially peel back the mudguard. 1. Make sure the ignition is switched off, and the turn signal switch is off.
• Page 522
  Maintenance and Care Owner Maintenance 4. Pull the unit rearward to remove it. 7. Install the new bulb in the reverse order of the removal procedure. License plate lights 1. Make sure the ignition is switched off, and the headlight switch is off. 2.
• Page 523
  Maintenance and Care Owner Maintenance Overhead light/Front map lights Rear map lights Vanity mirror lights 3. Install the new bulb in the reverse order of the removal procedure. 6-53 *Some models. CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 524
  Maintenance and Care Owner Maintenance Luggage compartment light 3. Insert the flathead screwdriver into the gap between the lens and the lens unit, 1. Wrap a small flathead screwdriver with and then slide the screwdriver to a soft cloth to prevent damage to the detach the lens.
• Page 525
  If a fuse has blown, the inside element will be melted. If the same fuse blows again, avoid using that system and consult an Authorized Mazda Dealer as soon as possible. ▼ Fuse Replacement 4. Inspect the fuse and replace it if it is blown.
• Page 526
  Always replace a fuse with a genuine Mazda fuse or equivalent of the same rating. Otherwise you may damage the electric system. 6. Reinstall the cover and make sure that it is securely installed.

• Page 527: Fuse Panel Description

  Maintenance and Care Owner Maintenance ▼ Fuse Panel Description Fuse block (Engine compartment) FUSE DESCRIPTION PROTECTED COMPONENT RATING 50 A For protection of various circuits 30 A For protection of various circuits INJECTOR 30 A Engine control system ENG.SUB SCR1 20 A Engine control system EVVT…

• Page 528
  Maintenance and Care Owner Maintenance FUSE DESCRIPTION PROTECTED COMPONENT RATING AUDIO 30 A Audio system DCDC REG FAN GE 30 A Cooling fan ENG.MAIN 40 A Engine control system ABS/DSC M 50 A ABS, Dynamic stability control system FAN DE 40 A Cooling fan WIPER…
• Page 529
  Maintenance and Care Owner Maintenance FUSE DESCRIPTION PROTECTED COMPONENT RATING FUEL WARM 25 A Fuel warmer TAIL 15 A Taillights, License plate lights SCR2 25 A Fuel system FUEL PUMP2 Hazard warning flashers, Turn signal lights/Front side-marker HAZARD 25 A lights, Parking lights H/L LOW R 15 A…
• Page 530
  Maintenance and Care Owner Maintenance FUSE DESCRIPTION PROTECTED COMPONENT RATING ESCL 15 A ― D.LOCK 25 A Power door locks SEAT WARM 20 A Seat warmer SUNROOF 10 A Moonroof F.OUTLET 15 A Accessory sockets MIRROR 7.5 A Power control mirror R.OUTLET1 15 A ―…

• Page 531: Appearance Care

  These acids can settle on a vehicle’s finish. As the water evaporates, Prevention the acid becomes concentrated and can It is necessary to have your Mazda washed damage the finish. and waxed to preserve its finish according And the longer the acid remains on the to the instructions in this section.

• Page 532
  Maintenance and Care Appearance Care Water Marks Chipped paint can lead to rust forming • on your Mazda. Before this happens, Occurrence repair the damage by using Mazda Rain, fog, dew, and even tap water can touch-up paint according to the contain harmful minerals such as salt and instructions in this section.
• Page 533
  When prompt washing with NOTE plain water is ineffective, use a mild soap Mazda is not responsible for scratches • made for use on vehicles. caused by automatic car washes or improper washing.
• Page 534
  CAUTION machine. If the car washer nozzle is put too close to the vehicle, the force of the If your Mazda is damaged and needs metal spray could damage or deform the parts repaired or replaced, make sure the molding, affect the sealability of parts, and body shop applies anti-corrosion materials allow water to penetrate the interior.
• Page 535
  Maintenance and Care Appearance Care ▼ Bright-Metal Maintenance ▼ Underbody Maintenance Use tar remover to remove road tar and Road chemicals and salt used for ice and • insects. Never do this with a knife or snow removal and solvents used for dust similar tool.
• Page 536
  Maintenance and Care Appearance Care ▼ Plastic Part Maintenance ▼ Aluminum Wheel Maintenance A protective coating is provided over the When cleaning the plastic lenses of the • lights, do not use gasoline, kerosene, aluminum wheels. Special care is needed to protect this coating.
• Page 537
  Rubbing hard with a stiff brush or cloth • Authorized Mazda Dealer: may cause damage. If a seat belts is used under such a condition, it cannot function at its full If the vehicle interior becomes soiled by…
• Page 538
  Maintenance and Care Appearance Care ▼ Vinyl Upholstery Maintenance If the leather upholstery comes into • contact with any of the following, clean Remove dust and dirt from the vinyl it immediately. upholstery using a brush or vacuum. Leaving it uncleaned could cause Remove soiling from vinyl upholstery premature wear, mold, or stains.
• Page 539
  Maintenance and Care Appearance Care ▼ Instrument Panel Top (Soft pad) Maintenance Extremely soft material is used for the soft pad surface. If the soft pad surface is rubbed harshly with a dry cloth, it could result in the surface being damaged and leaving white scratch marks.
• Page 540
  Maintenance and Care Appearance Care ▼ Active Driving Display ▼ Cleaning the Window Interiors Maintenance If the windows become covered with an oily, greasy, or waxy film, clean them with Windshield type glass cleaner. Follow the directions on the The dust-proof sheet has a coating. When container.

• Page 541: If Trouble Arises

  If Trouble Arises Helpful information on what to do if a problem arises with the vehicle. Parking in an Emergency….7-2 Warning/Indicator Lights and Parking in an Emergency….7-2 Warning Sounds……7-24 If a Warning Light Turns On or Flashes……..7-24 Flat Tire……….7-3 Message Indicated in Multi- Spare Tire and Tool Storage..

• Page 542: Parking In An Emergency

  If Trouble Arises Parking in an Emergency Parking in an Emergency The hazard warning lights should always be used when you stop on or near a roadway in an emergency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.

• Page 543: Flat Tire

  If Trouble Arises Flat Tire Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the diagram. Type A Tiedown eyelet Flat tire hold-down bolt Jack Jack lever Lug wrench Spare tire Type B Tiedown eyelet Flat tire hold-down bolt Jack…

• Page 544
  To remove the jack ▼ Spare Tire 1. Open the luggage board, and lift it. Your Mazda has a temporary spare tire. The temporary spare tire is lighter and smaller than a conventional tire, and is designed only for emergency use and should be used only for VERY short periods.
• Page 545
  Do not use a tire chain on this tire because it will not fit properly. Do not use your temporary spare tire on any other vehicle, it has been designed only for your Mazda. Use only one temporary spare tire on your vehicle at the same time. Connector…
• Page 546
  If Trouble Arises Flat Tire For vehicles not equipped with a Changing a Flat Tire sub-woofer, turn the spare tire hold-down bolt counterclockwise and NOTE remove the spare tire. If the following occurs while driving, it could indicate a flat tire. Spare tire hold-down bolt Steering becomes difficult.
• Page 547
  If Trouble Arises Flat Tire 2. Put a vehicle with an automatic ▼ Removing a Flat Tire transaxle in Park (P), a manual transaxle in Reverse (R) or 1, and turn WARNING off the engine. 3. Turn on the hazard warning flasher. 4.
• Page 548
  If Trouble Arises Flat Tire 2. Loosen the lug nuts by turning them 6. Continue raising the jack head counterclockwise one turn each, but do gradually by rotating the screw with not remove any lug nuts until the tire your hand until the jack head is has been raised off the ground.
• Page 549
  Mazda is firmly in position and that it Jacking up the vehicle in a position cannot slip or move. other than the designated jack-up…
• Page 550
  3. Place the lug wrench on top of the key ▼ Locking Lug Nuts and apply pressure. Turn the wrench If your vehicle has Mazda optional counterclockwise. antitheft wheel lug nuts, one on each To install the antitheft lug nut wheel will lock the tires and you must use a special key to unlock them.
• Page 551
  If Trouble Arises Flat Tire ▼ Mounting the Spare Tire 3. Install the lug nuts with the beveled edge inward; tighten them by hand. 1. Remove dirt and grime from the mounting surfaces of the wheel and hub, including the hub bolts, with a cloth.
• Page 552
  Because the wheel studs and lug nuts on your Mazda have metric threads, using a non-metric nut is dangerous. On a metric stud, it would not secure the wheel and would damage the stud, which could cause the wheel to slip off and cause an accident.
• Page 553
  If Trouble Arises Flat Tire 8. Place the luggage board on the damaged tire. Luggage board 9. Remove the tire blocks and store the tools and jack. 10. Check the inflation pressure. Refer to Tires on page 9-9. 11. Have the flat tire repaired or replaced as soon as possible.
• Page 554
  If Trouble Arises Battery Runs Out Jump-Starting Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work. WARNING Follow These Precautions Carefully: To ensure safe and correct handling of the battery, read the following precautions carefully before using the battery or inspecting it.
• Page 555
  If Trouble Arises Battery Runs Out CAUTION Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in series or a 24 V motor generator set).
• Page 556
  If Trouble Arises Battery Runs Out NOTE Verify that the covers are securely • installed. 7-16 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 557: Emergency Starting

  5. If the engine fails to start, crank it without depressing the accelerator. If the engine still does not start using the previous procedure, have your vehicle inspected by an Authorized Mazda Dealer. 7-17 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 558
  If the engine does not start the first time, try starting it several more times. If it still does not start, contact an Authorized Mazda Dealer. 7-18 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 559
  Stop the under pressure and cause serious injury. engine and call an Authorized Mazda Dealer. 6. Make sure the cooling fan is operating, Open the hood ONLY after steam is no…
• Page 560
  Carefully add coolant as required (page 6-28). CAUTION If the engine continues to overheat or frequently overheats, have the cooling system inspected. The engine could be seriously damaged unless repairs are made. Consult an Authorized Mazda Dealer. 7-20 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 561: Emergency Towing

  Towing Description WARNING We recommend that towing be done only Always tow an AWD vehicle with all four by an Authorized Mazda Dealer or a wheels off the ground: commercial tow-truck service. Towing an AWD vehicle with either the front or rear wheels on the ground is…

• Page 562
  If Trouble Arises Emergency Towing Do not tow with sling-type equipment. Tiedown Hooks This could damage your vehicle. Use wheel-lift or flatbed equipment. CAUTION Do not use the front and rear tiedown eyelets for towing the vehicle. They have been designed only for securing the vehicle to a transport vessel during shipping.
• Page 563
  If Trouble Arises Emergency Towing Rear Rear Tiedown eyelet Jack lever Lug wrench 4. Hook the tying rope to the tiedown CAUTION eyelet. Do not use excessive force as it may CAUTION damage the cap or scratch the painted bumper surface. If the tiedown eyelet is not securely tightened, it may loosen or disengage NOTE…
• Page 564
  4. Select the applicable warning to view the warning details. ▼ Stop Vehicle in Safe Place Immediately If any of the following warning lights turns on, the system may have a malfunction. Stop the vehicle in a safe place immediately and contact an Authorized Mazda Dealer. 7-24 CX-5_8GB6-EA-17G_Edition1…
• Page 565
  Do not drive with both the ABS warning light and brake warning light illuminated. Warning Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible: Driving when the brake system warning light and ABS warning light are illuminated simultaneously is dangerous.
• Page 566
  4. Start the engine and check the warning light. If the light remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and have your vehicle towed to an Authorized Mazda Dealer. The light flashes when the engine coolant temperature is extremely high, and illumi- nates when the engine coolant temperature increases further.
• Page 567
  ▼ Contact Authorized Mazda Dealer and Have Vehicle Inspected If any of the following warning lights or the indicator light turns on/flashes, the system may have a malfunction. Contact an Authorized Mazda Dealer to have your vehicle inspected. Signal Warning If the ABS warning light stays on while you’re driving, the ABS control unit has detected a system malfunction.
• Page 568
  Signal Warning With Multi-information Display Displays when notification of the system malfunctions is required. Check the message indicated in the display and consult an Authorized Mazda Dealer. Master warning light Indication in display and master warning light in instrument cluster are illuminated at same time.
• Page 569
  If this light illuminates while driving, the vehicle may have a problem. It is important to note the driving conditions when the light illuminated and consult an Authorized Mazda Dealer. The check engine light may illuminate in the following cases: The fuel tank level being very low or approaching empty.
• Page 570
  If the automatic transaxle warning indication/light illuminates, the transaxle has an electri‐ Light cal problem. Continuing to drive your Mazda in this condition could cause damage to your transaxle. Consult an Authorized Mazda Dealer as soon as possible. “4WD System Malfunction” is displayed The indication is displayed under the following conditions.
• Page 571
  A system malfunction is indicated if the warning light constantly flashes, constantly illu- minates or does not illuminate at all when the ignition is switched ON. If any of these oc- cur, consult an Authorized Mazda Dealer as soon as possible. The system may not operate in an accident.
• Page 572
  If the message is indicated, or the push button start indicator light (amber) flashes, the en‐ gine may not start. If the engine cannot be started, try starting it using the emergency oper‐ ation for starting the engine, and have the vehicle inspected at an Authorized Mazda Deal‐ er as soon as possible.
• Page 573
  Signal Warning A problem in the system may be indicated under the following conditions. Have your vehicle inspected at an Authorized Mazda Dealer. The light does not turn on when the ignition is switched ON. • The light remains on even when the Blind Spot Monitoring (BSM) system can be operat- •…
• Page 574
  Warning Indication/ For any other reasons, have the vehicle in- Warning Light spected at an Authorized Mazda Dealer. The light turns on when the remaining fuel is about 9.0 L (2.3 US gal, 1.9 Imp gal). NOTE Low Fuel Warning In- Add fuel.
• Page 575
  If Trouble Arises Warning/Indicator Lights and Warning Sounds Signal Warning Action to be taken Except Mexico The seat belt warning light turns on if the driver or front passenger’s seat is occupied and the seat belt is not fastened with the ig- nition switched ON.
• Page 576
  If Trouble Arises Warning/Indicator Lights and Warning Sounds Signal Warning Action to be taken Mexico The seat belt warning light turns on if the driver or front passenger’s seat is occupied and the seat belt is not fastened with the ig- nition switched ON.
• Page 577
  Authorized Mazda Dealer or a tire repair station. Do not ignore the TPMS Warning Light: Ignoring the TPMS warning light is dangerous, even if you know why it is illuminated.
• Page 578
  Leaks need to be addressed by more than simply refilling the trouble tire as leaks are dangerous ― take it to an Authorized Mazda Dealer which has all the equipment to fix tires, TPMS systems and order the best replacement tire for your vehicle.
• Page 579
  If Trouble Arises Warning/Indicator Lights and Warning Sounds KEY Warning Indication/Warning Light Take the appropriate action and verify that the warning light turns off. Signal Cause Action to be taken The key battery is dead. Replace the key battery (page 6-42). (White) KEY Warning Indica- tion…
• Page 580
  Cancel the AUTOHOLD function or the cle is being held in a stop position by the Mazda Radar Cruise Control with Stop AUTOHOLD function or during the & Go function (MRCC with Stop & Go…
• Page 581
  & Go function (MRCC with Stop & Go function or during the stop hold control function) stop hold control while de- of the Mazda Radar Cruise Control with pressing the brake pedal. Stop & Go function (MRCC with Stop & Go function).
• Page 582
  ▼ Stop Vehicle in Safe Place Immediately If the following messages are displayed in the center display , a vehicle system may be malfunctioning. Stop the vehicle in a safe place and contact an Authorized Mazda Dealer. Display Indicated Condition Displays if the engine coolant temperature has increased excessively.
• Page 583
  If Trouble Arises Warning/Indicator Lights and Warning Sounds ▼ Verify Display Content Displays in the following cases: Display Indicated Condition/Action to be taken The following message is displayed when the temperature around the center display is high. Lowering the temperature in the cabin or the temperature around the center display by avoiding direct sunlight is recommended.
• Page 584
  35 minutes. will be heard when the driver’s door is Have your vehicle inspected at an opened. Authorized Mazda Dealer as soon as 1 If the light switch is left on, the auto possible. headlight off function automatically…
• Page 585
  If Trouble Arises Warning/Indicator Lights and Warning Sounds ▼ Seat Belt Warning Beep Mexico If the vehicle speed exceeds about 20 Except Mexico km/h (12 mph) with the driver or front If the driver’s seat belt is not fastened passenger’s seat belt unfastened, a warning when the ignition is switched ON, a beep beep sounds continuously.
• Page 586
  If Trouble Arises Warning/Indicator Lights and Warning Sounds ▼ Ignition Not Switched Off (STOP) ▼ Request Switch Inoperable Warning Warning Beep Beep (With the advanced keyless function) If the driver’s door is opened with the ignition switched to ACC, a beep will be If the request switch is pressed with the heard continuously in the cabin to notify door open or ajar, or the ignition is not…
• Page 587
  (page 3-8). inspected at an Authorized Mazda Dealer. ▼ Power Liftgate Warning Beep ▼ Power Steering Warning Buzzer If system operation precautions are…
• Page 588
  (DEF) has decreased, a sound is activated. vehicle. If the sound is activated when the engine is started, consult an Authorized Mazda ▼ Lane Departure Warning Sound Dealer. While the system is operating, if the…
• Page 589
  If Trouble Arises Warning/Indicator Lights and Warning Sounds ▼ Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) System Warnings The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &…
• Page 590
  Lever Cover After performing this emergency measure, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible. 7-50 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 591
  If the active driving display does not operate, switch the ignition off and then restart the engine. If the active driving display does not operate even with the engine restarted, have the vehicle inspected at an Authorized Mazda Dealer. 7-51 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 592
  MEMO 7-52 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 593: Customer Information And Reporting Safety Defects

  Tire Labeling……8-26 (Canada)……..8-16 Location of the Tire Label (Placard)……..8-31 Warranty………. 8-17 Tire Maintenance……8-34 Warranties for Your Mazda..8-17 Vehicle Loading……8-37 Outside the United States/ Steps for Determining the Correct Canada……..8-18 Load Limit……..8-43 Registering Your Vehicle in A Foreign Country (Except United Declaration of Conformity….8-44…

• Page 594: Customer Assistance

  Air Bag FAQs > Air Bag Deactivation). ▼ STEP 1: Contact Your Mazda Dealer Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS, SALES, •…

• Page 595
  Operations by one of the following ways. Log on: at www.MazdaUSA.com Answers to many questions, including how to locate or contact a local Mazda dealership in the U.S., can be found here. E-mail: click on “Contact Us” located on the bottom of the page at www.mazdausa.com under “Help”…
• Page 596
  Mazda North American Operations realizes that mutual agreement on some issues may not be possible. As a final step to ensure that your concerns are being fairly considered, Mazda North American Operations has agreed to participate in a dispute settlement program administered by the Better Business Bureau (BBB) system, at no cost to you the consumer.
• Page 597
  Mazda or one of our dealers, and a statement of the relief you are seeking. 5. BBB AUTO LINE staff may try to help resolve your dispute through mediation. If…
• Page 598
  AND the nonconformity has been subject to repair two or more times by Mazda or its agents AND the buyer or lessee has directly notified Mazda of the need for the repair of the nonconformity; OR The same nonconformity has been subject to repair 4 or more times by Mazda or its •…
• Page 599
  Customer Information and Reporting Safety Defects Customer Assistance 12. Please call BBB AUTO LINE at 1-800-955-5100 for further details about the program. CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 600
  Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In our experience, any questions, problems, or complaints regarding the operation of your Mazda or any other general service transactions are most effectively resolved by your dealer.
• Page 601
  If a specific item of concern arises, where a solution cannot be reached between an owner, Mazda, and/or one of its dealers (that all parties cannot agree upon), the owner may wish to use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
• Page 602
  Ontario 1 (800) 207-0685 Atlantic Canada 1 (800) 207-0685 Quebec 1 (800) 207-0685 ▼ Regional Offices REGIONAL OFFICES COVERING AREAS MAZDA CANADA INC. WESTERN REGION ALBERTA, 5011 275 STREET BRITISH COLUMBIA, LANGLEY, BRITISH COLUMBIA MANITOBA, V4W 0A8 SASKATCHEWAN, (778) 369-2100…
• Page 603
  ▼ STEP 1 Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS, SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of the dealership or the OWNER.
• Page 604
  Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take the following steps: ▼ Contact Your Mazda Dealer Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS, SALES, •…
• Page 605
  Customer Information and Reporting Safety Defects Customer Assistance In order to serve you efficiently and effectively, please help us by providing the following information: 1. Your name, address, and telephone number 2. Year and model of vehicle 3. Vehicle Identification Number (17 digits, noted on your registration or title or located on the upper driver’s side corner of the dash) 4.
• Page 606
  TEL: (684) 699-9347 TEL: 1 (800) 263-4680 (in Canada) (905) 787-7000 (outside Canada) ▼ PUERTO RICO/U.S. Virgin Island International Automotive Distributor Group, LLC. (Mazda de Puerto Rico) P.O. Box 191850, San Juan, Puerto Rico 00919-1850 TEL: (787) 641-1777 ▼ MEXICO Mazda Motor de Mexico Mario Pani # 150, PB Col.

• Page 607: Reporting Safety Defects

  Irvine, California 92618 P.O. Box 19734 Irvine, CA 92623-9734 Customer Experience Center or toll free at 1 (800) 222-5500 If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown (page 8-14) in this manual. 8-15 CX-5_8GB6-EA-17G_Edition1…

• Page 608
  Customer Information and Reporting Safety Defects Reporting Safety Defects Reporting Safety Defects (Canada) Canadian customers who wish to report a safety-related defect to Transport Canada, Defect Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contact Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330 Sparks Street, Ottawa ON K1A 0N5.
• Page 609
  Customer Information and Reporting Safety Defects Warranty Warranties for Your Mazda New Vehicle Limited Warranty • Powertrain Limited Warranty • Safety Restraint System Limited Warranty • Anti-perforation Limited Warranty • Federal Emission Control Warranty/California Emission Control Warranty • Emission Defect Warranty •…
• Page 610
  Mazda outside the United States/Canada. United States However, in the event that you are moving to Canada permanently, Mazda vehicles built for use in the United States could be eligible for exportation to Canada with specific vehicle modifications to comply with the Canadian Motor Vehicle Safety Standards (CMVSS).
• Page 611
  Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be unavailable. There might not be an Authorized Mazda Dealer in the country you plan to take your vehicle. The Mazda warranty is valid only in certain countries.
• Page 612
  Non-genuine parts and accessories for Mazda vehicles can be found in stores. These may fit your vehicle, but they are not approved by Mazda for use with Mazda vehicles. When you install non-genuine parts or accessories, they could affect your vehicle’s performance or safety systems;…

• Page 613: Cell Phones

  Customer Information and Reporting Safety Defects Cell Phones Cell Phones Warning WARNING Please comply with the legal regulations concerning the use of communication equipment in vehicles in your country: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous.

• Page 614: Event Data Recorder

  EDR. Mazda will not disclose any of the data recorded in an EDR to a third party unless: A written agreement from the vehicle owner or the lessee is obtained •…

• Page 615
  Mazda and its subcontracting parties may obtain and use the recorded data for vehicle malfunction diagnosis, research and development, and quality improvement. Mazda will not disclose or provide any of the obtained data to a third party unless: An agreement from the vehicle owner (agreements from lessor and lessee for leased •…
• Page 616
  Customer Information and Reporting Safety Defects Uniform Tire Quality Grading System (UTQGS) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. National Highway Traffic Safety Administration for grading tires by tread wear, traction, and temperature performance.

• Page 617: Uniform Tire Quality Grading

  These grades will be added to the sidewalls of passenger vehicle tires over the next several years according to a schedule established by the NHTSA and the tire manufacturers. The grade of tires available as standard or optional equipment on Mazda vehicles may vary with respect to grade.

• Page 618
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Tire Labeling Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a tire identification number for safety standard certification and in case of a recall.
• Page 619
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation of the various components of that tire size and load index rating. Note that the tire size and load index rating may be different from the example.
• Page 620
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Letter Rating Speed Rating 149 mph For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. For tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR. M S or M/S: Mud and Snow AT: All Terrain.
• Page 621
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
• Page 622
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) 1. Temporary tires 2. Nominal width of tire in millimeters 3. Ratio of height to width (aspect ratio) 4. Diagonal 5. Rim diameter code 6. Load index & speed symbol T115/70D16 90M is an example of a tire size and load index rating. Here is an explanation of the various components of that tire size and load index rating.
• Page 623
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Location of the Tire Label (Placard) You will find the tire label containing tire inflation pressure by tire size and other important information on the driver’s side B-pillar or on the edge of the driver’s door frame. SAMPLE ▼…
• Page 624
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) WARNING Always check the tire inflation pressures on a regular basis according to the recommended tire inflation pressure on the tire label and in conjunction with the information in this owner’s manual: Driving your vehicle with under-inflated tires is dangerous.
• Page 625
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) ▼ Glossary of Terms Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicle can carry. Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size, and date of manufacture.

• Page 626: Specifications

  To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) at the latest or sooner if irregular wear develops. Mazda recommends to rotate every 8,000 km (5,000 miles) to help increase tire life and distribute wear more evenly.

• Page 627
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) ▼ Replacing a Tire WARNING Always use tires that are in good condition: Driving with worn tires is dangerous. Reduced braking, steering, and traction could result in an accident. If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replace the tire when this happens.
• Page 628
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) ▼ Safety Practices The way you drive has a great deal to do with your tire mileage and safety. So cultivate good driving habits for your own benefit. Observe posted speed limits and drive at speeds that are safe for the existing weather •…
• Page 629
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Vehicle Loading This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your vehicle will provide maximum return of vehicle design performance.
• Page 630
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Payload is the combination weight of cargo and passengers that the vehicle is designed to carry. The maximum payload for your vehicle can be found on the Tire and Load Information label on the driver’s door frame or door pillar. Look for “THE COMBINATION WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER EXCEED XXX kg or XXX lbs”…
• Page 631
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Cargo Weight includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. The cargo weight limit decreases depending on the number of vehicle occupants.
• Page 632
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label located on the driver’s door frame or door pillar.
• Page 633
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Always keep the vehicle within the axle weight rating limits. GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the vehicle and the loaded trailer — including all cargo and passengers — that the vehicle can handle without risking damage.
• Page 634
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Examples: For a 5000 lb conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain a proper tongue load range of 500 to 750 lbs. For an 11,500 lb fifth-wheel trailer, multiply by 0.15 and 0.25 to obtain a proper king pin load range of 1,725 to 2,875 lbs.
• Page 635
  Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Steps for Determining the Correct Load Limit Steps for Determining Correct Load Limit- (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s placard. (2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.

• Page 636: Declaration Of Conformity

  Customer Information and Reporting Safety Defects Declaration of Conformity Declaration of Conformity ▼ Keyless Entry System/Immobilizer System 8-44 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 637
  Customer Information and Reporting Safety Defects Declaration of Conformity ▼ Blind Spot Monitoring (BSM) NOTE During printing time of this user manual the approvals listed above are granted. WARNING Change or modifications not expressively approved by the party responsible for compliance could void the use’s authority to operate the equipment.
• Page 638
  Customer Information and Reporting Safety Defects Declaration of Conformity NOTE FCC ID: NZLMOBHL4 CANADA:4112A-MOBHL4 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1- This device may not cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation.
• Page 639
  Customer Information and Reporting Safety Defects Declaration of Conformity ® Mazda Bluetooth Hands-Free Customer Service U.S.A. • Phone: 800-430-0153 (Toll-free) Web: www.mazdausa.com/mazdaconnect Canada • Phone: 800-430-0153 (Toll-free) Web: www.mazdahandsfree.ca Mexico Brief description: Bluetooth module for Hands-free telephone and streaming audio •…
• Page 640
  Customer Information and Reporting Safety Defects Declaration of Conformity Type B U.S.A. and Canada 8-48 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 641
  Customer Information and Reporting Safety Defects Declaration of Conformity Mexico 8-49 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 642
  Customer Information and Reporting Safety Defects Declaration of Conformity ▼ Mazda Radar Cruise Control (MRCC)/Distance Recognition Support System (DRSS)/Smart Brake Support (SBS) 8-50 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 643
  Specifications Technical information about your Mazda. Identification Numbers….. 9-2 Personalization Features….9-11 Vehicle Information Labels..9-2 Personalization Features….. 9-11 Specifications……..9-4 Specifications……. 9-4 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 644: Identification Numbers

  Specifications Identification Numbers ▼ Chassis Number Vehicle Information Labels Open the cover shown in the figure to check the chassis number. ▼ Vehicle Identification Number The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the cowl panel located on the left corner of the dashboard.

• Page 645
  Specifications Identification Numbers ▼ Engine Number SKYACTIV-G 2.0, SKYACTIV-G 2.5 Forward SKYACTIV-D 2.2 Forward CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…
• Page 646
  ― number PE5S-18-110 spark plug The spark plugs provide the SKYACTIV-G its optimum performance. Consult an Authorized Mazda Dealer for details. CAUTION When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on the iridium alloy and platinum tips could be damaged.
• Page 647
  GL-4 Manual transaxle oil 75W-80 Automatic transaxle fluid Mazda Genuine ATF-FZ Transfer case oil Mazda Long Life Hypoid Gear Oil SG1 Rear differential oil Mazda Long Life Hypoid Gear Oil SG1 Brake fluid SAE J1703 or FMVSS116 DOT-3 NOTE Refer to Introduction on (page 6-2) for owner’s responsibility in protecting your investment.
• Page 648
  Specifications Specifications Item Capacity Transfer case oil 0.45 L (0.48 US qt, 0.40 Imp qt) Rear differential oil 0.35 L (0.37 US qt, 0.31 Imp qt) 56.0 L (14.8 US gal, 12.3 Imp gal) Fuel tank 58.0 L (15.3 US gal, 12.8 Imp gal) Check oil and fluid levels with dipsticks or reservoir gauges.
• Page 649
  Specifications Specifications SKYACTIV-G 2.5 Indication on display Item GVWR (Gross Vehicle Weight Rating) 2,048 kg (4,515 lbs) 2,106 kg (4,643 lbs) Front 1,057 kg (2,330 lbs) 1,075 kg (2,370 lbs) GAWR (Gross Axle Weight Rating) Rear 994 kg (2,191 lbs) 1,034 kg (2,280 lbs) SKYACTIV-D 2.2 Indication on display…

• Page 650: Air Conditioner

  Specifications Specifications ▼ Air Conditioner The type of refrigerant used is indicated on a label attached to the inside of the engine com- partment. Check the label before recharging the refrigerant. Refer to Climate Control Sys- tem on page 5-4. Item Classification Refrigerant Type…

• Page 651
  NOTE The tires have been optimally matched with the chassis of your vehicle. When replacing tires, Mazda recommends that you replace tires of the same type originally fitted to your vehicle. For details, contact an Authorized Mazda Dealer. Check the tire pressure label for tire size and inflation pressure.
• Page 652
  Specifications Specifications Temporary spare tire (U.S.A. and Canada) Tire size Inflation pressure T145/90D16 106M 420 kPa (60 psi) T155/90D17 101M 420 kPa (60 psi) (Mexico) Tire size Inflation pressure 185/80R17 99M 320 kPa (3.2 bar, 46 psi) Lug nut tightening torque When installing a tire, tighten the lug nut to the following torque.

• Page 653: Personalization Features

  Personalization Features The following personalization features can be set or changed by the customer or an Author- ized Mazda Dealer. Consult an Authorized Mazda Dealer for details. Additionally, some of the personalization features can be changed by the customer depend- ing on the feature.

• Page 654
  Specifications Personalization Features Settings Change Factory Item Feature Available Settings Method Setting The system can be changed so that the On/Off A ― steering wheel assist does not operate. The cancel sensi- tivity of the steer- ing assistance for High High/Low A ―…
• Page 655
  Specifications Personalization Features Settings Change Factory Item Feature Available Settings Method Setting The system can be changed so that Dis- tance Recognition Support System On/Off A ― Distance Recognition (DRSS) does not operate. Support System (DRSS) The distance at which the vehicle ahead (page 4-110) and your vehicle indicated in the display Near…
• Page 656
  Specifications Personalization Features Settings Change Factory Item Feature Available Settings Method Setting Once: Touch Once: All Method for unlocking door using request Driver’s, Doors/ switch/transmitter Twice: All Once: Driver’s, Doors Twice: All Doors 90 seconds/ 60 sec- Time for locking door automatically 60 seconds/ A ―…
• Page 657
  Specifications Personalization Features Settings Change Factory Item Feature Available Settings Method Setting Lights-on reminder Warning beep volume High High/Low/Off A ― (page 7-44) 120 seconds/ 90 seconds/ Coming home light 30 sec- Time until headlights turn off 60 seconds/ A ― (page 4-56) onds 30 seconds/…
• Page 658
  On/Off C ― Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends that these systems remain On. Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.

• Page 659: Index

  Index 10-1 CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27…

• Page 660
  Index USB……….5-81 Voice Recognition……5-114 Accessory Socket……5-134 Volume/Display/Sound Active Driving Display….. 4-30 Controls……..5-70 Adaptive Front Lighting System Audio System (AFS)……….4-95 Antenna……..5-19 Add-On Non-Genuine Parts and Appendix……..5-125 Accessories……..8-20 Audio Control Switch….5-15 Advanced Key Audio Set [Type A (non- Advanced keyless entry system..3-9 touchscreen)]…….
• Page 661
  Index Bluetooth® Preparation….5-35 Cruise Control……… 4-160 Bluetooth® [Type B (touchscreen)] Cruise control switch….4-160 Bluetooth® Audio……. 5-93 Cruise main indication (white)/cruise Bluetooth® Hands-Free…..5-103 set indication (green)….4-161 Bluetooth® Preparation….5-90 Cruise Control Set Vehicle Speed Body Lubrication……6-34 Display……….4-19 Bottle Holder……..5-137 Cup Holder……..5-136 Brakes Customer Assistance……
• Page 662
  Index Turbocharged vehicles (SKYACTIV- Maintaining the finish….6-62 D 2.2)………..3-57 Plastic part maintenance….6-66 Winter driving……3-53 Dynamic Stability Control (DSC)..4-85 TCS/DSC indicator light….. 4-85 Flasher Hazard warning……4-67 Headlights……..4-53 Electric parking brake (EPB)…. 4-72 Flat Tire……….7-3 Electric Parking Brake (EPB) Warning Mounting the spare tire….
• Page 663
  Index Inspecting Brake/Clutch Fluid Level……….6-29 Hazardous Driving……3-51 Inspecting Coolant Level….6-28 Hazard Warning Flasher….4-67 Inspecting Engine Oil Level….. 6-27 Headlights Inspecting Washer Fluid Level..6-30 Coming home light……4-56 Instrument Cluster……4-12 Control……… 4-53 Interior Care……..6-67 Headlight flashing……. 4-56 Active driving display High-low beam……
• Page 664
  Scheduled……..6-4 Maintenance Monitor……6-17 Manual Transaxle Operation…..4-41 Keyless Entry System……3-3 Map Lights……..5-132 Keys………….3-2 Mazda Radar Cruise Control with Stop & Key suspend function….3-8 Go function (MRCC with Stop & Go Transmitter……..3-4 function)………. 4-117 Key Left-in-luggage Compartment Close proximity warning… 4-121 Warning beep (With the advanced Cruise control function….4-128…
• Page 665
  Radar Sensor (Front)…….4-155 (LDWS) Display……4-29 Rearview Mirror……..3-38 Maintenance Monitor….4-27 Rear Coat Hooks……5-142 Mazda Radar Cruise Control with Rear Cross Traffic Alert (RCTA)..4-113 Stop & Go function (MRCC with Rear Door Child Safety Locks..3-19 Stop & Go function) System Rear Seat……….
• Page 666
  Index Recording of Vehicle Data….8-23 Selective Catalytic Reduction (SCR) Recreational Towing……3-66 System (SKYACTIV-D 2.2)….4-170 Registering Your Vehicle in A Foreign Selective Catalytic Reduction (SCR) Country……….8-19 Warning Beep……..7-48 Replacement Smart Brake Support (SBS)…. 4-147 Fuse……….6-55 Collision warning…… 4-149 Key battery……..6-42 Stopping the Smart Brake Support Light bulbs……..6-49 (SBS) system operation…..4-149…
• Page 667
  Index Flat tire………. 7-3 Overheating……… 7-19 Tachometer……..4-15 Parking in an emergency….7-2 Theft-Deterrent System…..3-48 When Liftgate Cannot be Three-flash Turn Signal….4-59 Opened………7-50 Tiedown Turn Signals……..4-59 Hook……….7-22 Tires………..6-44 Flat tire………. 7-3 USB Power Outlet……5-135 Replacing a tire……6-46 Replacing a wheel…….
• Page 668
  Index Mazda Radar Cruise Control with Warranty……….8-17 Stop & Go function (MRCC with Weights……….9-6 Stop & Go function) system Windows warnings……..7-49 Power windows……3-40 Power Liftgate Warning Beep..7-47 Windshield Washer……4-63 Power steering warning buzzer..7-47 Windshield Wipers……4-60 Request switch inoperable warning Windshield Wiper De-icer….

Ссылка в разных форматах на этот раздел

TEXTHTMLBB Code

Mazda Motor Corporation

HIROSHIMA, JAPAN

Important Notes About This Web Owner’s Manual

All specifications and descriptions are accurate at the time they are published on the Web site. Because improvement is a constant goal at Mazda, we reserve the right to make changes in specifications at any time without notice and without obligation.

Please be aware that this Web owner’s manual applies to all models, equipment and options. As a result, you may find some explanations for equipment not installed on your vehicle.

About this Website

We want to help you get the most driving pleasure from your vehicle. This Web owner’s manual, when read from beginning to end, can do that in many ways.

Illustrations complement the text to best explain how to enjoy your Mazda. By reading this Web owner’s manual, you can learn about the features, important safety information, and driving under various road conditions.

The symbol below when indicated means «Do not do this» or «Do not let this happen».

References to left hand and right hand are made as if facing in the same direction the vehicle faces. Although this manual explains a left-hand-drive model, it also applies to right-hand-drive models.

The symbol below, located on some parts of the vehicle, indicates that this Web owner’s manual contains information related to the part.
Please refer to this Web owner’s manual for a detailed explanation.

• This Web owner’s manual may not display normally depending on the device being used and the contracted services available with the device.
• Communication fees may occur while connected (accessing).
• Access may not be available in poor network or communication environments.

©2017 Mazda Motor Corporation

Form No. e-8FT1-EE-17B

Feb. 2017 (Data1)