Лего техник 42110 б модель инструкция

Требуются инструкции по сборке из вашего набора ЛЕГО set 42110 Technic Land Rover Defender? Ниже вы можете просмотреть и загрузить бесплатно инструкции по сборке в формате PDF. Кроме того, приведены часто задаваемые вопросы, рейтинг изделия и отзывы пользователей, что позволит оптимально использовать ваше изделие. Если это не то руководство, которое вы искали, – свяжитесь с нами.

Ваше устройство неисправно, и в руководстве отсутствует решение? Перейдите в Repair Café для получения бесплатных ремонтных услуг.

Руководство

Рейтинг

Сообщите нам, что вы думаете о ЛЕГО set 42110 Technic Land Rover Defender, оставив оценку продукта. Хотите поделиться вашими впечатлениями от данного изделия или задать вопрос? Вы можете оставить комментарий в нижней части страницы.

Довольны ли вы данным изделием ЛЕГО?
Да Нет

61 голоса

Часто задаваемые вопросы

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

В наборе нет одного элемента Lego, где можно заказать запасной? Проверенный
В компании Lego работает служба, где можно заказать отдельные элементы или куда можно обратиться в случае нехватки элементов в наборе. Дополнительную информацию см. на веб-сайте.

Это было полезно (4267)

Как предотвратить изменение цвета игрушек Lego? Проверенный
Цвет пластиковых игрушек Lego меняется по двум главным причинам: длительное воздействие солнечного света или сигаретного дыма. Постарайтесь минимизировать воздействие этих факторов на ваши игрушки Playmobil.

Это было полезно (1433)

Как лучше всего чистить детали конструктора Lego? Проверенный
Lego советуют чистить детали вручную с помощью воды (не выше 40°C) и щадящего чистящего средства. Никогда не мойте детали Lego в посудомоечной или стиральной машине. Оставьте детали сушиться на воздухе. Очищайте электрические детали исключительно сухой тканью.

Это было полезно (1315)

Каждый раз после сборки нового набора Lego у меня остается несколько маленьких деталей. Я забыл(-а) ими воспользоваться? Проверенный
Нет, во многих наборах Lego есть запасные детали для мелких элементов.

Это было полезно (1071)

Как лучше всего наносить наклейки на детали Lego? Проверенный
Чтобы наклейки можно было переклеить, рекомендуется обработать место нанесения наклейки средством для очистки стекол. После размещения наклейки дайте ей высохнуть, чтобы она держалась на месте.

Это было полезно (952)

Где я могу найти список деталей моего набора Lego? Проверенный
Многие современные инструкции Lego включают список деталей в конце буклета. В случае нескольких буклетов список можно найти в середине PDF-файла.

Это было полезно (934)

Можно ли использовать детали Lego и Duplo вместе? Проверенный
Да, детали Lego и Duplo совместимы. Детали Lego устанавливаются на детали Duplo с полыми шипами. Детали Duplo лучше всего устанавливаются на более крупные детали Lego, на мелких деталях они могут держаться хуже.

Это было полезно (829)

С какого возраста можно играть с Lego? Проверенный
Большинство наборов Lego предназначены для детей от 4 лет, поскольку содержат мелкие детали. Специальная серия Duplo предназначена для детей от 1,5 лет. Возрастные ограничения всегда указываются на коробке.

Это было полезно (817)

Где я могу найти инструкции для альтернативной модели моего набора Lego Technic? Проверенный
Мы объединили инструкции для альтернативных моделей с инструкциями для основной модели. Прокрутите обычные инструкции, чтобы просмотреть альтернативную модель.

Это было полезно (349)

Update 20/05/2022

I tested the drive train again after keeping the set built for a long time, and also tried if the new improved gears could help getting rid of the cracking:

Unfortunately the new gears did not solve the situation either, so I have to say that despite the most careful assembly, the set will start to show the cracking behavior sooner or later.

Introduction

I shared many videos with you about the LEGO Technic Land Rover Defender already, you saw my detailed building review, the details of the drive train and the one about the cracking noise and the possible fixes. I received hundreds of comments from you and many-many requests for help, hopefully in most of the cases I was able to assist to find the proper solution.

I decided to create a summary and a video about all the potential issues I found during the building process. I’ll also go through the drive train from the wheels to the engine, how to verify your build, and what are the problems that are not really problems. Each section is linked to the proper part of the video, use the summery below to find the section you are looking for:

• Introduction
• Drive train walk trough, how does it work
• Body removal guide
• Building errors based on steps
  • Step 3 – incorrect gear used, issue at step 62
  • Step 4 – rear differential direction swap
  • Step 45 – gears swapped or not placed correctly
  • Step 65 – small cross block inserted incorrectly
  • Step 74 – small cross block inserted incorrectly
  • Step 84 – small cross block inserted incorrectly
  • Step 88-89 – U-joint orientation
  • Step 102 – Red 2L axle
  • Step 104-106 – rear suspension – lower attachment point of the springs
  • Step 134 – front differential direction swap
  • Step 152 – front suspension – lower attachment point of the springs
  • Step 259-261 – correct assembly of the DNR and Hi/Lo selectors
  • Step 271 – correct gear usage
  • Step 272 – U joint should not touch the 24 tooth gear
• Building errors based on the symptoms
  • Cannot connect the two assemblies properly at step 62
  • Rear wheels are blocked when the car is pushed forward – mistake at step 65
  • Gears does not fit properly at step 45
  • All wheels are blocked when turned together – possible issue at step 84
  • Front and rear wheels turn against each other when the central differential is manually turned – differential direction swap at the front or at the rear
  • Gearbox and fake engine does not work at all – possible differential direction swap at the front or at the rear
  • Cracking noise in the drive train – U joints not aligned properly at step 88-89 or U joint touches the 24 tooth gear at step 272
  • Suspension seems to be soft, the front axle or the rear axle of the car sits down
• Verification steps
  • What shall work at the end of bag 1 at step 123
  • Verification of all functions at step 321
• General advises
• Problems that are not really problems
  • Left/right or front/rear wheels are turning in the opposite direction
  • Step 62 – wheels are not turning the gears in the gearbox
  • End of bag 1 – wheels are not turning the gears in the gearbox
• What to do if everything is built correctly and the gears are still cracking

Drive train walk trough, how does it work

I go through the drive train from the wheels up to the engine to demonstrate how it works. I suggest to watch it to have a better understanding on the mechanism, it helps to find the issue with your build.

Body removal guide

This section shows you how to remove the body of the car in bigger pieces to gain access to the internals

Building errors based on steps

Step 3 – incorrect gear used, issue at step 62

Error: a 12 tooth black gear is used at step 3 instead of the 8 tooth dark bluish gray gear
Symptom: the two assemblies cannot be properly joined at step 62, the axle won’t turn

Step 4 – rear differential direction swap

Error: The orientation of the differential is important at step 4
Symptom: If one of the two differentials is built in reversed then the front and rear wheels will work against each other and the central differential won’t turn, it won’t drive the gearbox and the engine. Click here to see how does it look like.
How to fix with a finished build : Follow these instructions:

Step 45 – gears swapped or not placed correctly

Error: If incorrect gears are used at step 45 then the assembly cannot be completed

Step 65 – small cross block inserted incorrectly

Error: a common mistake that can be made a lot of times in this build. If the #6536 Technic cross block is inserted incorrectly then the axle that supposed to turn freely in the pin hole will be blocked in the axle hole.
Symptom: The rear wheels does not turn when the car is pushed on the ground as the output of the rear differential is blocked
How to fix with a finished build : Follow these instructions:

Step 74 – small cross block inserted incorrectly

Error: a common mistake that can be made a lot of times in this build. If the #6536 Technic cross block is inserted incorrectly then the axle that supposed to turn freely in the pin hole will be blocked in the axle hole.
Symptom: The central differential or the gearbox is blocked

Step 84 – small cross block inserted incorrectly

Error: a common mistake that can be made a lot of times in this build. If the #6536 Technic cross block is inserted incorrectly then the axle that supposed to turn freely in the pin hole will be blocked in the axle hole.
Symptom: The central differential is blocked

Step 88-89 – U-joint orientation

Error: if the universal joints on the input and output shafts of the gearbox are not aligned correctly
Symptom: the drive train will not run smoothly and in higher gears you’ll hear a cracking noise.
How to fix with a finished build: Follow these steps:

Step 102 – Red 2L axle

Error: if the 2L red axle is not pushed in then the some beams will not be linked together and the structure becomes unstable

Step 104-106 – rear suspension – lower attachment point of the springs

Error: The lower attachment point of the springs in the rear suspension are chosen incorrectly, the inner hole is used on the suspension arm instead of the outer axle hole
Symptom: the suspension will not work properly and the whole rear of the car will sit lower than the front
How to fix with a finished build: follow these steps:

Step 134 – front differential direction swap

Error: The direction of the differential is important at step 134
Symptom: If one of the two differentials is built in reversed then the front and rear wheels will work against each other and the central differential won’t turn, it won’t drive the gearbox and the engine.
How to fix with a finished build : Same as the fix for Step 4

Step 152-154 – front suspension – lower attachment point of the springs

Error: The lower attachment point of the springs in the front suspension are chosen incorrectly, the inner hole is used on the suspension arm instead of the outer axle hole
Symptom: the suspension will not work properly and the whole front of the car will sit lower than the rear
How to fix with a finished build : Same as the fix for Step 104-106

Step 259-261 – correct assembly of the DNR and Hi/Lo selectors

Error: the assembly of the DNR and the Hi/Lo selector requires a lot of parts to be aligned correctly, if there’s a mistake they won’t work properly

Step 271 – correct gear usage

Error – if the dark bluish gray 8 tooth gear is not added at step 271 or an incorrect one is used then the front wheels won’t drive the central differential
Symptom: The front wheels are not driving the central differential

Step 272 – U joint should not touch the 24 tooth gear

Error: The U-joint on the input shaft of the gearbox is placed incorrectly and it touches the 24 tooth gear next to it
Symptom: Cracking noise coming from the drive train
How to fix with a finished build: Follow these steps:

Verification steps

I suggest to follow these verification steps to see if everything works correctly at that stage.

What shall work at the end of bag 1 at step 123

Verification of all functions at step 321

General advises

• There should be no bigger pieces or gears left after any building stages. You can see the list of the leftover parts here at the end of the inventory. If you have any bigger parts left after finishing a section go back and find where it belongs.

Problems that are not really problems

Left/right or front/rear wheels are turning in the opposite direction

Step 62 – wheels are not turning the gears in the gearbox

At this stage the wheels are not yet connected to the gearbox

End of bag 1 – wheels are not turning the gears in the gearbox

At this stage the wheels are not yet connected to the gearbox

What to do if everything is built correctly and the gears are still cracking

As you see in the video, if the car is still cracking then the best solution is to take it apart and try to rebuild it with everything aligned properly. There’s no ultimate fix for the cracking, you need to verify each section carefully to ensure a smooth operation.

There is one additional thing you can try to fix the cracking if everything else fails, although this falls in the “might or might not work” category. For some people flipping both differentials at the front and rear axle eliminates the cracking.

---

Haven’t got this set yet?

Check out here…

Choose your local online LEGO Store below to get the LEGO Technic 42110 Land Rover Defender.

lego.com US / lego.com UK / lego.com AU

---

Disclaimer: the post contains affiliate links, they won’t cost you extra money but any purchase made through them might help to run the site with a small commission.

Loading…