Контроллер carel aria инструкция по настройке

• Contents

• Table of Contents

• Bookmarks

Summary of Contents for Carel easy way aria

• 22 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 °C/°F This function is used to select the unit of measure (°C or °F) for the temperature values. It can only be activated using the multifunction button (see • con guration par. 4.2.8) Change the unit of measure: Press the multifunction button • until reaching the following screen Fig. 4.d.d Fig. 4.d.e To exit the selected function: By time, 5 seconds after the last button is pressed• manually by pressing

• 16 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 MODE /ON-OFF button (1) The button is used to: CHANGE THE DESIRED OPERATING MODE, CYCLICALLY.• SWITCH THE UNIT ON/OFF• MODE Each operating modes is associated with a symbol on the display. Fig. 4.c.a The operating mode can be read/written from the supervisor. par. description min max def um type index R/W notes — Activate operating mod

• 31 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 par. description min max default UOM type index R/W notes loc 18 Lock keypad function 0 not active 8 lock button 5 1 not active 1 9 lock button 1 & 5 2 not active 2 10 lock button 2 & 5 3 not active 1 & 2 11 lock button 1, 2 & 3 4 not active 3 12 lock button 3 & 5 5 not active 1 & 3 13 lock button 1, 3 & 5 6 not active 2 & 3 14 lock button 2, 3 & 5 7 not active 1, 2 & 3 15 lock button 1, 2, 3 & 5 0 15 0 — I 27

• 33 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 par. description min max def UOM type index R/W notes — Dehumidi cation request 0 request not active 1 request active 0 1 — D 10 R — Use ambient temp./humidity from supervisor 0 Use the values from the local sensors 1 Use the values from the supervisor (A10, A11) 0 1 0 D 11 W — Enable time bands from supervisor 0 Local time bands 1 Control of time band symbols from supervisor (I16) 0 1 0 D 12 W — Synchronise time function 0 Local time 1 Enable write time from supervisor (I10, I11). When w

• 28 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 4.5 Setting the parameters The terminal features a series of internal parameters to customise the device according to the type of use. The parameters are divided into two categories: User – parameters modi able by the user without entering the • password Factory – parameters modi able only after having entered the • password Key: + Pressing the buttons t

• 3 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 WARNINGS CAREL bases the development of its products on decades of experience in HVAC, on the continuous investments in technological innovations to products, procedures and strict quality processes with in-circuit and functional testing on 100% of its products, and on the most innovative production technology available on the market. CAREL and its subsidiaries nonetheless cannot guarantee that all the aspects of the product and th

• 5 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 Content 1. INTRODUCTION 7 1.1 easy way ARIA ……………………………………………………………………………………………………….7 1.2 Description ……………………………………………………………………………………………………………7 1.3 Advantages of the CAREL solution ……………………………..

• 10 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 The following chapter describes an example of the procedure for setting the address, con guring and connecting the devices for the creation of a wireless domain connectable to a Master controller using the CAREL protocol (pCO, PlantVisor, PlantWatch,…). The procedure includes: setting the address of the access point1. setting the address of the terminals2. setting the a

• Notes
  

• 11 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 for around 20 seconds The instrument is ready for the use. The transmission channel has been selected and will be sent to the repeaters, sensors and terminals during the binding phase. Important: If the sequence is not as indicated, reinitialise the device (see paragraph • 3.5) If the instrument is reinitialised, all the instruments associated with it • will be disconnected and will need to be

• 18 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 The time bands can be disabled by setting  eld 4 as follows Band 1 Band 2 ON ON OFF OFF Note: if HOUR and MINUTES of band 1 (H1M1) = hour and minutes of band 2 (H2M2), the value of M2 is automatically increased by 1 minute. Example: with manual set point 21°C. Fig. 4.c.e Time bands from the supervisor If the control of the time bands is transferred to the Master supervisor device (pCO, PlantVisor,…), the local time bands

• 9 GB easy way ARIA +030220841 — rel. 1.0 — 26.10.2007 2.1 Access point and Repeater Access Point 94 102 40 108 196 50 13 DI P: 1 2 3 4 ++ G — 12 3 4 Rx- Rx+ GND L1 L2 L3 70 Fig. 2.a Fasten the access point/repeater to the wall with the cable gland • facing downwards; connect the RS485 network to terminal (4); • tighten the antenna in the special housing (2), position it vertically to • the  oor; connect the power supply to terminal (1), ensuring the polarity • indicated for DC power supply;

• National Instruments

  PCI-GPIB

  October 2003323726A-01INSTALLATION GUIDEInstalling Your PCI-GPIB, PXI-GPIB, or PMC-GPIB and NI-488.2 for SolarisThis document describes how to install and configure your GPIB hardware and NI-488.2 software. Refer to the section that describes the installation for your particular board. Other documentation, including …

  PCI-GPIB Controller, 16

• Keyence

  CA-DC100

  (217) 352-9330 | [email protected] | artisantg.com-~ ARTISAN® ~I TECHNOLOGY GROUP Your definitive source for quality pre-owned equipment. Artisan Technology Group Full-service, independent repair center with experienced engineers and technicians on staff. We buy your excess, underutilized, and idle equipment along w …

  CA-DC100 Controller, 4

• Wandfluh

  SD7

  OPERATING INSTRUCTIONSCONTROLLER MODULE SD7 Wandfluh AGPostfachCH-3714 FrutigenTel: +41 33 672 72 72Fax: +41 33 672 72 12Email: [email protected]: www.wandfluh.comPage 1Edition 17 33SD7_OperatingInstructions_controller_e.pdf Operating Instructions to Controller Electronics SD7 …

  SD7 Controller, 160

• Promatic

  CMP25-2

  PROMATIC CMP25-2 Régulateur de vanne mélangeuse pour circuits de chauffage FRE Witterungsgeführte Heizungsregler des Mischerheizkreises DEU Weather compensated controller for mixing heating circuits ENG Regolatore climatico per circuiti di riscaldamento miscelati ITA …

  CMP25-2 Controller, 184