Инструкция по эксплуатации xerox phaser 3117

1. Manuals
2. Brands
3. Xerox Manuals
4. Printer
5. 3117 — Phaser B/W Laser Printer
6. User manual

Quick Links

• Page 2
  This manual is provided for information purposes only. All information included herein is subject to change without notice. Xerox Corporation is not responsible for any damages, direct or indirect, arising from or related to use of this manual.

• Page 3: Table Of Contents

  ONTENTS NTRODUCTION Chapter 1: Special Features ……….1.2 Printer Driver Features ……… 1.3 Printer Components ……….1.4 Understanding the Control Panel ……1.6 On Line/Error() and Toner Save() LEDs ….1.6 Cancel() button ……….1.7 ETTING RINTER Chapter 2: Unpacking …………2.2 Selecting a Location ……..

• Page 4
  Maintaining the Toner Cartridge ……4.2 Redistributing Toner ……..4.3 Replacing the Toner Cartridge ……4.5 Using the Toner Save Mode ……..4.5 Cleaning the Printer ……….4.6 Cleaning the Outside ……..4.6 Cleaning the Inside ……… 4.6 Consumables and Replacement Parts ….. 4.9 OLVING ROBLEMS Chapter 5:…
• Page 5
  Important Precautions and Safety Information When using this machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to people: Read and understand all instructions. Use common sense whenever operating electrical appliances. Follow all warnings and instructions marked on the machine and in the literature accompanying the machine.
• Page 6
  Unplug the machine from the PC and AC wall outlet, and refer servicing to qualified service personnel under the following conditions: •When any part of the power cord, plug, or connecting cable is damaged or frayed. •If liquid has been spilled into the machine. •If the machine has been exposed to rain or water.

• Page 7: Laser Safety Statement

  Environmental and Safety Consideration Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere, is certified as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous.

• Page 8: Ozone Safety

  However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, please contact your nearest Xerox dealer. Power Saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use.

• Page 9: Radio Frequency Emissions

  Radio Frequency Emissions FCC regulations This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation.

• Page 10
  Declaration of Conformity (European Countries) Approvals and Certifications The CE marking applied to this product symbolizes Xerox Corporation. Declaration of Conformity with the following applicable 93/68/EEC Directives of the European Union as of the dates indicated: January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the member states related to low voltage equipment.
• Page 12
  Introduction Congratulations on the purchase of your Printer! This chapter includes: • Special Features • Printer Driver Features • Printer Components • Understanding the Control Panel…

• Page 13: Introduction

  Special Features Your new printer is equipped with special features that improve the print quality, giving you a competitive edge. You can: Print with excellent quality and high speed 600 dots per inch (dpi) • You can print at 16 ppm in A4 17 ppm in Letter •…

• Page 14: Printer Driver Features

  Printer Driver Features Your printer drivers will support the following standard features: • Paper source selection • Paper size, orientation and media type • number of copies Table below lists a general overview of features supported by your printer drivers. Printer Driver Feature Win 98/Me…

• Page 15: Printer Components

  Printer Components Front View Output support Paper output tray Top cover (Face down) Control panel Front cover Paper input tray Toner cartridge Side guides Rear guide NTRODUCTION…

• Page 16: Rear View

  Rear View USB port Power switch Power receptacle NTRODUCTION…

• Page 17: Understanding The Control Panel

  Understanding the Control Panel On Line/Error( ) and Toner Save( LEDs Description If the lights green, the printer is ready to print. If the lights red, the printer is experiencing an error, such as jammed paper, no paper, the open top or front cover, or the empty toner cartridge.

• Page 18: Cancel() Button

  Description If you press the button in Ready mode, this LED is on and the Toner Save mode is enabled. If you press this button once again, this LED is off and the Toner Save mode is disabled. If the LEDs blink, your system has some problems.

• Page 19: Setting Up Your Printer

  Setting Up Your Printer This chapter provides step by step information on setting up your printer. This chapter includes: • Unpacking • Installing the Toner Cartridge • Loading Paper • Connecting a Printer Cable • Turning the Printer on • Printing a Demo Page •…

• Page 20: Unpacking

  Unpacking Remove the printer and all accessories from the packing carton. Make sure that the printer has been packed with the following items: Power Cord Toner Cartridge CD-ROM Quick Install Guide USB Cable Notes: • If any items are missing or damaged, notify your dealer immediately.

• Page 21: Selecting A Location

  Carefully remove all of packing tape from the printer. Tape Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening cover and tray. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity.

• Page 22: Installing The Toner Cartridge

  Installing the Toner Cartridge Grasp the front cover and pull it toward you to open. Note: Because the printer is very light, it may be moved when you use it; for example, when opening/closing the tray or installing/ removing the toner cartridge. Be careful not to move the printer. Remove the toner cartridge from its bag and remove the paper protecting the cartridge by pulling the packing tape.

• Page 23
  Gently roll the cartridge 5 or 6 times to distribute the toner. Thoroughly rolling the cartridge will assure maximum copies per cartridge. Note: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. Cautions: •…
• Page 24
  Unfold the toner cartridge handle and grasp it. Insert the cartridge in the printer until it snaps into place. Note: Carefully insert or pull out the toner cartridge not to scratch against the printer. Close the front cover. Make sure that the cover is securely closed.

• Page 25: Loading Paper

  Loading Paper You can load approximately 150 sheets of paper in the tray. Grasp the paper input tray and pull it toward you to open. Pinch the rear guide and pull it out to extend the tray. Note: Because the printer is very light, it may be moved when you use it;…

• Page 26
  Load paper with the print side facing up. Make sure that all four corners are flat in the tray. Pay attention not to overload paper. Paper overloading may cause paper jams. Pinch the rear guide to adjust for the paper length and pinch the side guide and slide it to the left flush against the paper.

• Page 27: Connecting A Printer Cable

  Connecting a Printer Cable To print from your computer, you need to connect your printer to your computer with a Universal Serial Bus (USB) cable. Note: Connecting the printer to the USB port of the computer requires a certified USB cable. Make sure that both the printer and the computer are turned off.

• Page 28: Turning The Printer On

  Turning the Printer on Plug the power cord into the power receptacle on the back of the printer. Plug the other end into a properly grounded AC outlet and turn on the printer using the power switch. To the AC outlet Cautions: •…

• Page 29: Printing A Demo Page

  Printing a Demo Page Print a demo page to make sure that the printer is operating correctly. Press and hold down the button on the control panel for about 2 seconds to print a demo page. The Demo page shows the printer’s current configuration. 2.11 ETTING RINTER…

• Page 30: Installing Printer Software

  Installing Printer Software You must install software using the supplied CD-ROM after you have set up your machine and connected it to your computer. For details, see Software User Guide Printer driver for Windows Use this driver to take full advantage of your printer’s features. For details, see Software User Guide.

• Page 31
  2.13 ETTING RINTER…

• Page 32: Using Print Materials

  Using Print Materials This chapter will help you understand types of paper you can use with this printer and how to properly load paper in the tray for the best print quality. This chapter includes: • Choosing Paper and Other Materials •…

• Page 33: Choosing Paper And Other Materials

  Choosing Paper and Other Materials You can print on a variety of print materials, such as plain paper, envelopes, labels, transparencies and so on. See “Paper Specifications” on page 6.3. To get the best possible print quality, use only high-quality copier-grade paper. When you choose print materials, consider the followings: •…

• Page 34: Type And Capacities

  Type and Capacities Paper Type Capacity Plain paper Envelopes Labels Transparency films Card stocks a. Maximum capacity may be reduced depending on the paper thickness. b. If you load more than one sheet, paper jams will occur. You must load only one sheet at a time in the tray.

• Page 35
  • For envelopes: — Use only well-constructed envelopes with sharp, well creased folds. — Do not use envelopes with clasps and snaps. — Do not use envelopes with windows, coated lining, self- adhesive seals, or other synthetic materials. — Do not use damaged or poorly made envelopes. — Only use envelopes recommended for laser printers.
• Page 36
  • For Card Stock or Custom-sized materials: — Postcards, 3.5 by 5.83 in.(index) cards and other custom- sized materials can be printed with this printer. The minimum size is 76 by 127mm(3.0 by 5.0 in.) and the maximum size is 216 by 356mm(8.5 by 14 in.) — Always insert the short-edge into the Manual Feed first.

• Page 37: Verifying The Output Location

  Verifying the Output Location The printer has the paper output tray that collects paper face- down, in correct order. Notes: • If you continuously print many pages, the surface of the output tray may become hot. Be careful not to touch the surface, and especially keep children away from the surface.

• Page 38: Using Manual Feed Mode

  Using Manual Feed Mode If you select Manual Feed in the Source option, you can manually load paper in the tray. Manually loading paper can be helpful when you want to check the print quality after each page is printed. If you experience a paper jam from the tray, load one sheet of paper at a time into the tray.

• Page 39: Printing On Special Materials

  Printing on Special Materials Open the paper input tray. Load the print material in the paper input tray. Do not mix types. See the following directions to load each type of print material. •Load the envelopes in the tray with the flap side down. The stamp area is on the left side and the end of the envelope with the stamp area enters the printer first and center of the tray.

• Page 40
  •Load transparencies in the tray with print side up, and the top with the adhesive strip going first. Notes: • To prevent transparencies from sticking to each other, do not let the printed sheets stack up as they are printed out. •…

• Page 41: Canceling A Print Job

  Adjust the side guide to the edge of the material. When you print on special material, you must select Manual Feed for Source from the software application, and then select the correct paper size and type. For details, see Software User Guide. Press the button to start feeding.

• Page 42
  To stop a print job from the Printers folder From the windows Start menu, select Settings. Select Printers to open the Printers window, and double- click the your printer icon. From the Document menu, select Cancel Printing (Windows 98/Me) or Cancel (Windows 2000/XP). In Manual Feed mode, you can’t cancel a print job by pressing button.

• Page 43: Maintaining Your Printer

  Maintaining Your Printer This chapter provides suggestions for maintaining the toner cartridge and the printer. This chapter includes: • Maintaining the Toner Cartridge • Using the Toner Save Mode • Cleaning the Printer • Consumables and Replacement Parts…

• Page 44: Maintaining The Toner Cartridge

  Maintaining the Toner Cartridge Toner cartridge storage To get the maximum results from the toner cartridge, keep the following guidelines in mind. • Do not remove the toner cartridge from its package until ready for use. • Do not refill the toner cartridge. The printer warranty does not cover damage caused by using a refilled cartridge.

• Page 45: Redistributing Toner

  Redistributing Toner When toner is low, faded or light areas may appear on a printed page. You may be able to temporarily improve the print quality by redistributing the toner. The following procedures may allow you to finish the current print job before replacing the toner cartridge.

• Page 46
  Gently shake the toner cartridge from side to side five or six times to redistribute the toner. Note: If the toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

• Page 47: Replacing The Toner Cartridge

  Replacing the Toner Cartridge If the print remains light after redistributing toner (see page 4.3), replace the toner cartridge. Remove the old cartridge and install a new toner cartridge. See “Installing the Toner Cartridge” on page 2.4. Using the Toner Save Mode The Toner Save mode allows the printer to use less toner on each page.

• Page 48: Cleaning The Printer

  Cleaning the Printer To maintain the print quality, follow the cleaning procedures below each time the toner cartridge is replaced or if print quality problems occur. Note: While cleaning the inside of the printer, be careful not to touch the transfer roller (located underneath the toner cartridge). Oil from your fingers can cause print quality problems.

• Page 49
  Pull the toner cartridge out and remove it from the printer.. With a dry, lint-free cloth, wipe away any dust and spilled toner from the toner cartridge area and the toner cartridge cavity. Note: To prevent damage to the toner cartridge, do not expose it to light for more than few minute.
• Page 50
  Reinsert the toner cartridge and close the cover. Make sure that the cover is securely closed. If it is not firmly closed, printing errors may occur when you print. Plug in the power cord, and turn the printer on. AINTAINING RINTER…

• Page 51: Consumables And Replacement Parts

  Approx. 50,000 pages Fuser Unit Approx. 50,000 pages To purchase the consumables and replacement parts, contact Xerox dealer or the place where you bought your product. We strongly recommend that items be installed by a trained service personnel. AINTAINING RINTER…

• Page 52: Solving Problems

  Solving Problems This chapter provides helpful information for what to do if you encounter an error while using your printer. This chapter includes: • Troubleshooting Checklist • Solving General Printing Problems • Clearing Paper Jams • Solving Print Quality Problems •…

• Page 53: Troubleshooting Checklist

  Troubleshooting Checklist If the printer is not working properly, consult the following checklist. If the printer does not pass a step, follow the corresponding troubleshooting suggestions. Check Solution Check the power cord Check the power source by plugging into another and the power switch.

• Page 54: Solving General Printing Problems

  Solving General Printing Problems For problems with the operation of your printer, refer to the table for suggested solutions. Problem Possible Cause Solution The Printer The printer is not Check the power cord connections. Check does not print. receiving power. the power switch and the power source.

• Page 55
  Problem Possible Cause Solution The printer The printer driver may Reinstall the printer driver; see does not print. be incorrectly Software User Guide. Try printing a (continued) installed. demo page. The printer is Check the LEDs on the control panel to malfunctioning.
• Page 56
  Problem Possible Cause Solution The printer The printer cable is Disconnect the printer cable and prints, but the loose or defective. reconnect. Try a print job that you have text is wrong, already printed successfully. If possible, garbled, or attach the cable and printer to another incomplete.

• Page 57: Clearing Paper Jams

  Clearing Paper Jams Occasionally, paper can be jammed during a print job. Some of causes include: • The tray is overfilled. • The front cover has been opened during a print job. • Paper that does not meet paper specifications has been used. See “Paper Specifications”…

• Page 58: In The Paper Exit Area

  In the Paper Exit Area Note: Paper jams in this area may result in loose toner on the page. If you get any toner on your clothes, wash them in cold water as hot water will set the toner into the fabric. If the paper jams as it exits to the output tray and a long portion of the paper is visible, pull the paper straight out.

• Page 59
  Loosen the paper if it is caught in the heat rollers. Then pull the paper gently out. Close the inner cover and the top cover. Printing resumes automatically. Note: Failed pages will not reprint. Try printing the pages. OLVING ROBLEMS…

• Page 60: In The Paper Feed Area

  In the Paper Feed Area Remove any missfeed paper by pulling it out by the visible edge from the tray. Make sure that all of the paper is properly aligned in the tray. Open and close the front or top cover to resume printing the document from failed pages.

• Page 61
  Gently pull the paper toward you. Check that there is no other paper in the printer. Reinstall the toner cartridge and close the front cover. Your printer resumes printing the document from failed pages. 5.10 OLVING ROBLEMS…

• Page 62: Tips For Avoiding Paper Jams

  Tips for Avoiding Paper Jams By selecting the correct paper types, most paper jams can be avoided. If a paper jam occurs, follow the steps outlined in “Clearing Paper Jams” on page 5.6. • Follow the procedures in “Loading Paper” on page 2.7. Ensure that the adjustable guides are positioned correctly.

• Page 63: Solving Print Quality Problems

  Solving Print Quality Problems Problem Solution Light or faded If a vertical white streak or faded area appears on the page: print • The toner supply is low. You may be able to temporarily extend the toner cartridge life. See “Redistributing Toner” on page 4.3.

• Page 64
  Problem Solution Vertical lines If black vertical streaks appear on the page: • The drum inside the toner cartridge has probably been scratched. Install a new toner cartridge. If white vertical streaks appear on the page: • The surface of the LSU part inside the machine may be dirty.
• Page 65
  Problem Solution Background Background scatter results from bits of toner distributed on scatter the printed page. • The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture.
• Page 66
  Problem Solution Wrinkles or • Ensure that the paper is loaded properly. creases • Check the paper type and quality. See “Paper Specifications” on page 6.3. • Turn over the stack of paper in the input tray. Also try rotating the paper 180° in the feeder. Back of printouts •…
• Page 67
  Problem Solution Character voids are white areas within the parts of Character Voids characters that should be solid black: • If you are using transparencies, try another type of transparency. Because of the composition of the transparency, some character voids are normal. •…

• Page 68: Troubleshooting Error Messages

  Troubleshooting Error Messages When the printer experiences an error, the control panel will indicate an error message with the indicator lights. Find the light pattern below that matches the printer light pattern and follow the solutions to clear the error. LED status legend symbol for “light off”…

• Page 69: Common Windows Problems

  Common Windows Problems Problem Possible Cause and Solution “File in Use” message Exit all software applications. Remove all software from appears during the StartUp Group, then restart Windows. Reinstall the installation. printer software. “General Protection Close all other applications, reboot Windows, and try Fault”, “Exception OE”, printing again.

• Page 70: Common Linux Problems

  LPRng is defined as the first queue in /etc/printcap, therefore it is not possible for the Xerox Printer Package to change the default when some queues have otherwise been defined using printtool.

• Page 71
  Problem Possible Cause and Solution The N-up setting does not The N-up feature is achieved through post-processing of work correctly for some the PostScript data that is being sent to the printing of my documents. system. However, such post-processing can only be adequately achieved if the PostScript data conforms to the Adobe Document Structing Conventions.
• Page 72
  Problem Possible Cause and Solution How do I specify the IP It can be specified in the “Add Printer” dialog of the address of my SMB configuration tool, if you don’t use the CUPS printing server? system. Unfortunately, CUPS currently doesn’t allow to specify the IP address of SMB printers, so you will have to be able to browse the resource with Samba in order to be able to print.
• Page 73
  5.22 OLVING ROBLEMS…

• Page 74: Chapter 6: Specifications

  Specifications This chapter includes: • Printer Specifications • Paper Specifications…

• Page 75: Printer Specifications

  Sound Pressure Level, ISO 7779. c. The number of pages may be affected by operating environment, printing interval, media type, and media size. d. Please visit www.xerox.com to download the latest software version. PECIFICATIONS…

• Page 76: Paper Specifications

  • Before purchasing large quantities of paper, ensure the paper meets the requirements specified in this User’s Guide. Caution: Using paper that does not meet these specifications may cause problems, requiring repairs. These repairs are not covered by Xerox warranty or service agreements. PECIFICATIONS…

• Page 77: Supported Sizes Of Paper

  Supported Sizes of Paper Size (mm/in.) Weight Capacity Plain paper Letter (216 x 279/8.5 x 11) • 16 to 24 lb A4 (210 x 297/8.3 x 11.7) (60 to 90 g/m • 150 sheets of 20 A5 (148 x 210/5.8 x 8.2) bond) for the lb (75 g/m bond)

• Page 78: Guidelines For Using Paper

  Guidelines for Using Paper For the best result, use conventional 75 g/m (20 lb) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges. If you are unsure of what type of paper you are loading (such as, bond or recycled), check the label on the package.

• Page 79: Paper Specifications

  Paper Specifications Category Specifications Acid Content 5.5 ~ 8.0 pH Caliper 0.094 ~ 0.18 mm (3.0 ~ 7.0 mils) Curl in Ream Flat within 5 mm (0.02 in.) Cut with sharp blades with no visible Cut Edge Conditions fray. Must not scorch, melt, offset, or release Fusing Compatibility hazardous emissions when heated to 200 °C (392 °F) for 0.1 second.

• Page 80: Printer And Paper Storage Environment

  Printer and Paper Storage Environment Paper storage environmental conditions directly affect the feed operation. Ideally, the printer and paper storage environment should be at or near room temperature, and not too dry or humid. Remember that paper is hygroscopic; it absorbs and loses moisture rapidly. Heat works with humidity to damage paper.

• Page 81
  NDEX problem, solving checklist 5.2 cancel, print 3.10 general 5.3 card, print 3.9 paper jams 5.6 clean, printer 4.6 connect power cord 2.10 USB cable 2.9 quality problem, solve 5.12 control panel, use 1.6 software demo page, print 2.11 overview 2.12 system requirements Windows 2.12…
• Page 83
  ONTENTS NSTALLING RINTER OFTWARE IN INDOWS Chapter 1: Installing Printer Software ………………….3 Reinstalling Printer Software ………………… 3 Removing Printer Software ………………….. 3 ASIC RINTING Chapter 2: Printing a Document …………………… 4 Printer Settings ……………………5 Layout Tab ……………………5 Paper Tab ……………………
• Page 84
  Deleting a Page Overlay ………………..15 HARING THE RINTER OCALLY Chapter 4: Setting Up a Host Computer ………………..16 Setting Up a Client Computer ………………..16 SING RINTER IN INUX Chapter 5: System Requirements ………………….17 Installing the Printer Driver ………………… 18 Changing the Printer Connection Method ……………..

• Page 85: Installing Printer Software In Windows

  Installing Printer Reinstalling Printer Software Software in Windows You can reinstall the software if installation fails. Start Windows. This chapter includes: From the Start menu select Programs or All Programs → your printer driver name → Maintenance. • Installing Printer Software Or place the CD-ROM into the CD-ROM drive.

• Page 86: Basic Printing

  Open the document you want to print. Basic Printing Select Print from the File menu. The Print window is displayed. It may look slightly different depending on your application. This chapter explains the printing options and common printing The basic print settings are selected within the Print tasks in Windows.

• Page 87: Printer Settings

  Layout Tab Printer Settings The Layout tab provides options to adjust how the document appears on the printed page. The Layout Options includes Multiple Pages per Side and Poster. See “Printing a You can use the printer properties window, which allows you to Document”…

• Page 88: Paper Tab

  Paper Tab Source Make sure that Source is set to the corresponding paper tray. Use the following options to set the basic paper handling Manual Feed is used when you print using special materials like specifications when you access the printer properties. See envelopes and transparencies.

• Page 89: Graphics Tab

  Graphics Tab Advanced Options Use the following Graphic options to adjust the print quality for You can set advanced settings by clicking the Advanced your specific printing needs. See “Printing a Document” on Options button. page 4 for more information on accessing printer properties. Click the Graphics tab to display the properties shown below..

• Page 90: Other Features Tab

  Other Features Tab About Tab You can select output options for your document. See “Printing Use the About tab to display the copyright notice and the a Document” on page 4 for more information about accessing version number of the driver. If you have an Internet browser, the printer properties.

• Page 91: Using A Favorite Setting

  Using a Favorite Setting Using Help The Favorites option, which is visible on each properties tab, Your printer has a help screen that can be activated by clicking allows you to save the current properties settings for future the Help button in the printer properties window. These help use.

• Page 92: Advanced Printing

  Advanced Printing Printing Multiple Pages on One Sheet of Paper (N-Up Printing) This chapter explains printing options and advanced printing tasks. You can select the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and arranged in the order you specify.

• Page 93: Printing Posters

  Printing Posters Printing a Reduced or Enlarged Document This feature allows you to print a single-page document onto 4, 9, or 16 sheets of paper, for the purpose of pasting the sheets You can change the size of a page’s content to appear larger or together to form one poster-size document.

• Page 94: Fitting Your Document To A Selected Paper Size

  Fitting Your Document to a Using Watermarks Selected Paper Size The Watermark option allows you to print text over an existing document. For example, you may want to have large gray This printer feature allows you to scale your print job to any letters reading “DRAFT”…

• Page 95: Editing A Watermark

  Editing a Watermark Click the Other Features tab, and click the Edit button in the Watermark section. The Edit Watermark window To change the print settings from your software appears. application, access printer properties. See “Printing a Document” on page 4. Click the Other Features tab and click the Edit button in the Watermark section.

• Page 96: Using Overlays

  In the Edit Overlay window, click Create Overlay. Using Overlays What is an Overlay? An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on Dear ABC any document.

• Page 97: Using A Page Overlay

  Using a Page Overlay If necessary, click Confirm Page Overlay When Printing. If this box is checked, a message window After an overlay has been created, it is ready to be printed with appears each time you submit a document for printing, your document.

• Page 98: Sharing The Printer Locally

  Sharing the Printer Setting Up a Host Computer Locally Start Windows. From the Start menu select Printers and Faxes. You can connect the printer directly to a selected computer, Double-click your printer driver icon. which is called “host computer,” on the network. From the Printer menu, select Sharing.

• Page 99: Using Your Printer In Linux

  Using Your Printer in System Requirements Linux Supported OS You can use your printer in a Linux environment. • Redhat 6.2/7.0/7.1 and above • Linux Mandrake 7.1/8.0 and above This chapter includes: • SuSE 6.4/7.0/7.1 and above • System Requirements •…

• Page 100: Installing The Printer Driver

  For Expert, select the desired option and then click Begin Install. Installing the Printer Driver Make sure that you connect the printer to your computer. Turn both the computer and the printer on. When the Administrator Login window appears, type in “root”…

• Page 101: Changing The Printer Connection Method

  Changing the Printer Connection Click the Connection tab and ensure that the printer port is set properly. If it is not, change the device setting. Method If you change the printer connection method from USB to parallel or vice versa while in use, you must reconfigure your Linux printer by adding the printer to your system.

• Page 102: Uninstalling The Printer Driver

  The Info tab shows general information about the printer. If you are an Internet user, you can click Go to the Web page for this printer to access the Xerox web page. Click the Job tab to inspect and manage the job queue for the selected printer.

• Page 103: Changing Llpr Properties

  The Properties tab allows you to change the default You can also open the LLPR Properties window in the printer settings. following ways: •From the Startup Menu icon at the bottom of the screen, select Linux Printer, and then Linux LPR. •If the Linux Printer Configuration window is currently open, select Test Print from the Print menu.

• Page 104
  NDEX darkness 7 favorites 9 advanced printing, use 10 orientation, print image mode 7 Windows 5 resolution Other Features properties, set 8 Windows 7 overlay toner save 7 create 14 document, print true-type option 7 delete 15 Windows 4 software print 15 install Linux 18…

Инструкция лазерного принтера Xerox Phaser 3117

Информация отображена на картинке

Информация отображена на картинке

Информация отображена на картинке

Информация отображена на картинке