Инструкция по эксплуатации принтера hp deskjet f2180

HP Deskjet F2100 All-in-One series

1

2

3

4

6 HP Deskjet F2100 All-in-One series Help

8 HP All-in-One overview

10 HP All-in-One overview

12 HP All-in-One overview

3 Find more information

You can access a variety of resources, both printed and onscreen, that provide information about setting up and using the HP All-in-One.

Setup Guide

The Setup Guide provides instructions for setting up the HP All-in-One and installing software. Make sure you follow the steps in the Setup Guide in order.

If you have problems during setup, check the Setup Guide for troubleshooting information, or see Troubleshooting in this onscreen Help.

Basics Guide

The Basics Guide contains an overview of the HP All-in-One, including step- by-step instructions for basic tasks, troubleshooting tips, and technical information.

HP Photosmart Essential animations

The HP Photosmart Essential animations are an interactive way to get a brief overview of the software included with the HP All-in-One. You will learn how the software can help you create, share, organize, and print your photos.

Onscreen Help

The onscreen Help provides detailed instructions on using all features of the

HP All-in-One.

•The How Do I? topic provides links so you can quickly find information on performing common tasks.

•The The HP All-in-One overview topic provides general information about the main features of the HP All-in-One.

•The Troubleshooting topic provides information about resolving errors you might encounter with the HP All-in-One.

Find more information

Chapter 3

information more Find

14 Find more information

16 How do I?

18 Connection information

20 Load originals and load paper

22 Load originals and load paper

24 Load originals and load paper

26 Load originals and load paper

28 Load originals and load paper

7 Print from your computer

The HP All-in-One can be used with any software application that allows printing. You can print a range of projects, such as borderless images, newsletters, greeting cards, iron-on transfers, and posters.

This section contains the following topics:

•Print from a software application

•Make the HP All-in-One the default printer

•Change the print settings for the current job

•Change the default print settings

•Printing shortcuts

•Perform special print jobs

•Stop a print job

•Resume a print job

Print from a software application

Most print settings are automatically handled by the software application. You need to change the settings manually only when you change print quality, print on specific types of paper or transparency film, or use special features.

To print from a software application

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Select the HP All-in-One as the printer.

If you set the HP All-in-One as the default printer, you can skip this step. The HP All- in-One will already be selected.

4.If you need to change settings, click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

NOTE: When printing a photo, you must select options for the correct paper type and photo enhancement.

5.Select the appropriate options for your print job by using the features available in the Advanced, Printing Shortcuts, Features, and Color tabs.

TIP: You can easily select the appropriate options for your print job by choosing one of the predefined print tasks on the Printing Shortcuts tab. Click a type of print task in the Printing Shortcuts list. The default settings for that type of print task are set and summarized on the Printing Shortcuts tab. If necessary, you can adjust the settings here and save your custom settings as a new printing shortcut. To save a custom printing shortcut, select the shortcut and click Save As. To delete a shortcut, select the shortcut and click Delete.

Print

Chapter 7

6.Click OK to close the Properties dialog box.

7.Click Print or OK to begin printing.

Make the HP All-in-One the default printer

You can set the HP All-in-One as the default printer to use from all software applications. This means that the HP All-in-One is automatically selected in the printer list when you select Print from the File menu in a software application. The default printer is also printed to automatically when you click the Print button in the toolbar of most software applications. For more information, see the Windows Help.

Change the print settings for the current job

You can customize the print settings of the HP All-in-One to handle nearly any print task. This section contains the following topics:

•Set the paper size

•Set the paper type for printing

•View the print resolution

•Change the print speed or quality

•Change the page orientation

•Scale the document size

•Change the saturation, brightness, or color tone

•Preview your print job

Set the paper size

The paper size setting helps the HP All-in-One determine the printable area on the page. Some of the paper size choices have a borderless equivalent, which allows you to print to the top, bottom, and side edges of the paper.

Usually, you set the paper size in the software application you used to create your document or project. However, if you are using custom-size paper, or if you cannot set the paper size from your software application, you can change the paper size in the Properties dialog box before printing.

To set the paper size

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

Print

30 Print from your computer

5.Click the Features tab.

6.In the Resizing Options area, click the appropriate paper size from the Size list. The following table lists the suggested paper size settings for the different types of paper you can load in the input tray. Make sure to look at the long list of choices in the Size list to see if a defined paper size already exists for the type of paper you are using.

Set the paper type for printing

If you print on special papers, such as photo paper, transparency film, envelopes, or labels, or if you experience poor print quality, you can set the paper type manually.

To set the paper type for printing

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Basic Options area, click the appropriate paper type from the Paper Type list.

Print

Chapter 7

View the print resolution

The printer software displays the print resolution in dots per inch (dpi). The dpi varies according to the paper type and print quality that you select in the printer software.

To view the print resolution

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Print Quality drop-down list, select the appropriate print quality setting for your project.

7.In the Paper Type drop-down list, select the type of paper that you have loaded.

8.Click the Resolution button to view the print resolution dpi.

Change the print speed or quality

The HP All-in-One automatically chooses a print quality and speed setting depending on the paper type setting you select. You can also change the print quality setting to customize the speed and quality of the print process.

To select a print speed or quality

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Print Quality drop-down list, select the appropriate quality setting for your project.

NOTE: To view the maximum dpi that the HP All-in-One will print, click

Resolution.

7.In the Paper Type drop-down list, select the type of paper that you have loaded.

Change the page orientation

The page orientation setting allows you to print your document vertically or horizontally on the page.

Usually, you set the page orientation in the software application you used to create your document or project. However, if you are using custom-size or special HP paper, or if you cannot set the page orientation from your software application, you can change the page orientation in the Properties dialog box before printing.

Print

32 Print from your computer

To change the page orientation

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Basic Options area, click one of the following:

•Click Portrait to print the document vertically on the page.

•Click Landscape to print the document horizontally on the page.

Scale the document size

The HP All-in-One allows you to print the document at a different size than the original.

To scale the document size

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Resizing options area, click Scale to paper size, and then click the appropriate paper size from the drop-down list.

Change the saturation, brightness, or color tone

You can change the intensity of colors and the level of darkness in your printout by adjusting the Saturation, Brightness, and Color Tone options.

Chapter 7

Preview your print job

You can preview your print job before sending it to the HP All-in-One. This helps to prevent wasting paper and ink on projects that do not print as expected.

To preview your print job

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Select the print settings appropriate for your project on each of the tabs in the dialog box.

6.Click the Features tab.

7.Select the Show Preview Before Printing check box.

8.Click OK, and then click Print or OK in the Print dialog box. Your print job displays in the preview window.

9.In the HP preview window, do one of the following:

•To print, click Start Printing.

•To cancel, click Cancel Printing.

Change the default print settings

If there are settings that you frequently use for printing, you might want to make them the default print settings so they are already set when you open the Print dialog box from within your software application.

To change the default print settings

1.In the HP Solution Center, click Settings, point to Print Settings, and then click

Printer Settings.

2.Make changes to the print settings, and click OK.

Printing shortcuts

Use printing shortcuts to print with print settings that you use often. The printer software has several specially designed printing shortcuts that are available in the Printing Shortcuts list.

NOTE: When you select a printing shortcut the appropriate printing options are automatically displayed. You can leave them as is or change them. You can also create a shortcut. For more information, see Create printing shortcuts.

Print

34 Print from your computer

Use the Printing Shortcuts tab for the following print tasks:

•General Everyday Printing: Print documents quickly.

•Photo Printing–Borderless: Print to the top, bottom, and side edges of 10 x 15 cm (4 x 6 inch) HP Premium Plus Photo Papers with a tear-off tab. For more information, see Print a borderless image.

•Photo Printing–With White Borders: Print a photo with a white border around the edges. For more information, see Print a photo on photo paper.

•Fast/Economical printing: Produce draft-quality printouts quickly.

•Presentation printing: Print high-quality documents, including letters and transparencies. For more information, see Print from a software application and Print on transparencies.

•Two-sided (Duplex) Printing: Print two-sided pages with the HP All-in-One manually. For more information, see Print on both sides of the page.

Create printing shortcuts

In addition to the printing shortcuts that are available in the Printing Shortcuts list, you can create your own printing shortcuts.

If you frequently print on transparency film, for example, you can create a printing shortcut by selecting the Presentation Printing shortcut, changing the paper type to HP Premium Inkjet Transparency Film, and then saving the modified shortcut under a new name; for example, Transparency Presentations. After creating the printing shortcut, simply select it when printing on transparency film rather than changing the print settings each time.

To create a printing shortcut

1.On the File menu in your software application, click Print.

2.Make sure the HP All-in-One is the selected printer.

3.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

4.Click the Printing Shortcuts tab.

5.In the Printing Shortcuts list, click a printing shortcut.

The print settings for the selected printing shortcut are displayed.

6.Change the print settings to those you want in the new printing shortcut.

7.In the Type new shortcut name here box, type a name for the new printing shortcut, and then click Save.

The printing shortcut is added to the list.

To delete a printing shortcut

1.On the File menu in your software application, click Print.

2.Make sure the HP All-in-One is the selected printer.

3.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

4.Click the Printing Shortcuts tab.

Print

Chapter 7

5.In the Printing Shortcuts list, click the printing shortcut that you want to delete.

6.Click Delete.

The printing shortcut is removed from the list.

NOTE: Only the shortcuts that you have created can be deleted. The original HP shortcuts cannot be deleted.

Perform special print jobs

In addition to supporting standard print jobs, the HP All-in-One can perform special jobs such as printing borderless images, iron-on transfers, and posters.

This section contains the following topics:

•Print a borderless image

•Print a photo on photo paper

•Create custom CD/DVD labels

•Print using Maximum dpi

•Print on both sides of the page

•Print a multiple-page document as a booklet

•Print multiple pages on a single sheet

•Print a multiple-page document in reverse order

•Reverse an image for iron-on transfers

•Print on transparencies

•Print a group of addresses on labels or envelopes

•Print a poster

•Print a Web page

Print a borderless image

Borderless printing lets you print to the top, bottom, and side edges of 10 x 15 cm (4 x 6 inch) HP Premium Plus Photo Papers with a tear-off tab. When you remove the tear-off tab, the printed image is borderless and extends to the edges of the paper.

6.In the Resizing Options area, click the appropriate paper size from the Size list.

If a borderless image can be printed on the specified size, the Borderless check box is enabled.

7.In the Basic options area, click a paper type in the Paper Type drop-down list.

NOTE: You cannot print a borderless image if the paper type is set to Automatic or to a type of paper other than a photo paper.

8.Select the Borderless printing check box if it is not already checked.

If the borderless paper size and paper type are not compatible, the HP All-in-One software displays an alert and allows you to select a different type or size.

9.Click OK, and then click Print or OK in the Print dialog box.

NOTE: Do not leave unused photo paper in the input tray. The paper might start to curl, which could reduce the quality of your printout. Photo paper should be flat before printing.

Related topics

Load 10 x 15 cm (4 x 6 inch) photo paper

Print a photo on photo paper

For high-quality photo printing, HP recommends you use HP Premium Plus Photo Papers with the HP All-in-One.

You can also improve the quality of the photos you print with the HP All-in-One by purchasing a photo print cartridge. With the tri-color print cartridge and photo print cartridge installed, you have a six-ink system, which provides enhanced quality color photos.

NOTE: Some models of the HP All-in-One do not support photo print cartridges.

To print a photo on photo paper

1.Remove all paper from the input tray, and then load the photo paper print side down.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Basic Options area, select the appropriate photo paper type from the Paper Type drop-down list.

7.In the Resizing Options area, click the appropriate paper size from the Size list. If the paper size and paper type are not compatible, the HP All-in-One software displays an alert and allows you to select a different type or size.

8.In the Basic Options area, select a high print quality, such as Best or Maximum dpi from the Print Quality drop-down list.

Print

Chapter 7

9.In the HP real life technologies area, click the Photo fix drop-down list and select from the following options:

•Off: applies no HP real life technologies to the image.

•Basic: automatically focuses the image; moderately adjusts image sharpness.

•Full: automatically lightens dark images; automatically adjusts sharpness, contrast, and focus of images; automatically removes red-eye.

10.Click OK to return to the Properties dialog box.

11.If you want to print the photo in black and white, click the Color tab and select the

Print in grayscale check box.

12.Click OK, and then click Print or OK in the Print dialog box.

NOTE: Do not leave unused photo paper in the input tray. The paper might start to curl, which could reduce the quality of your printout. Photo paper should be flat before printing.

Related topics

•Handle the print cartridges

•Work with print cartridges

Create custom CD/DVD labels

You can create custom labels for your CDs and DVDs on the HP All-in-One by following the steps below. Or, to create custom CD and DVD labels online, go to www.hp.com and follow the prompts.

To create custom CD/DVD labels

1.Make sure you have CD/DVD tattoo paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Paper Type drop-down list, click More, and then select HP CD/DVD tattoo paper from the list.

7.Click OK, and then click Print or OK in the Print dialog box.

Print using Maximum dpi

Use Maximum dpi mode to print high-quality, sharp images.

To get the most benefit from Maximum dpi mode, use it to print high-quality images such as digital photographs. When you select the Maximum dpi setting, the printer software displays the optimized dots per inch (dpi) that the HP All-in-One will print.

Printing in Maximum dpi takes longer than printing with other settings and requires a large amount of disk space.

Print

38 Print from your computer

NOTE: If a photo print cartridge is also installed, the print quality is enhanced. A photo print cartridge can be purchased separately if it is not included with the HP All- in-One.

To print in Maximum dpi mode

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Paper Type drop-down list, click More, and then select the appropriate paper type.

7.In the Print Quality drop-down list, click Maximum dpi.

NOTE: To view the maximum dpi that the HP All-in-One will print, click

Resolution.

8.Select any other print settings that you want, and then click OK.

Related topics

Work with print cartridges

Print on both sides of the page

You can print two-sided pages with the HP All-in-One manually. When printing two-sided pages, make sure to use paper that is thick enough so that images do not show through to the other side.

To print on both sides of the page

1.Load paper into the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the HP All-in-One is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Paper saving options area, select Manual from the Two-sided printing dropdown list.

Print

Chapter 7

7.For binding, do one of the following:

•For binding on the top like a notebook or calendar, select the Flip Pages Up check box.

This causes the odd and even pages of your document to print opposite of each other top-to-bottom. This ensures that the top of the page is always at the top of the sheet when you flip the pages up in your bound document.

1

3

5

•For binding on the side like a book or magazine, click to clear the Flip pages up check box.

This causes the odd and even pages of your document to print opposite of each other left-to-right. This ensures that the top of the page is always at the top of the sheet when you turn the pages in your bound document.

1 3 5

8.Click OK, and then click Print or OK in the Print dialog box.

The HP All-in-One begins printing. Wait until all the odd-numbered pages are printed before removing any of the printed pages from the output tray.

A dialog box displays instructions on the screen when it is time to process the second side of your job. Do not click Continue in the dialog box until you have reloaded the paper as instructed.

9.Follow the instructions that appear on your screen for reloading the paper to print on the second side, and then click Continue.

Print a multiple-page document as a booklet

The HP All-in-One allows you to print your document as a small booklet, which you can fold and then staple together.

For best results, design your document to fit on a multiple of four pages, such as an 8, 12, or 16-page program for a child’s school play or for a wedding.

Print

40 Print from your computer