Инструкция по эксплуатации canon eos 5d mark iii

Поддержка

Загружайте ПО, встроенное ПО и руководства, а также получите доступ к материалам поддержки для вашего продукта серии EOS.

Руководства пользователя

Руководства для вашего устройства или программного обеспечения перечислены ниже.

Приложения и функции

На этой вкладке можно посмотреть доступные приложения и функции, совместимые с вашим устройством.

Встроенное ПО

Встроенное ПО — это постоянное программное обеспечение, установленное на устройстве и обеспечивающее его корректную работу. Canon может периодически выпускать обновления для этого встроенного ПО, и если обновление доступно, его можно загрузить ниже.

FAQs

На этой вкладке вы найдете ответы на часто задаваемые вопросы и другую полезную информацию, которая поможет вам в решении вопросов и проблем.

Важная информация

На этой вкладке вы найдете подборку часто задаваемых вопросов, которые, на наш взгляд, будут вам интересны.

Коды ошибок

Код ошибки или сообщение об ошибке может появиться на устройстве по различным причинам. С помощью поля поиска можно найти полезную информацию о конкретном коде ошибки, где будут указаны причина ошибки и необходимые действия по ее устранению.

Технические характеристики

Ниже приведены все технические характеристики данного продукта.

1. Manuals
2. Brands
3. Canon Manuals
4. Digital Camera
5. EOS 5D Mark III
6. Instruction manual

• Page 1
  ENGLISH INSTRUCTION MANUAL The “Software Start Guide” is included at the end of this manual.

• Page 2: Introduction

  Introduction The EOS 5D Mark III is a high-performance, digital single-lens reflex camera featuring a fine-detail, full-frame (approx. 36 x 24 mm) CMOS sensor with approx. 22.3 effective megapixels, DIGIC 5+, approx. 100% viewfinder coverage, high-precision and high-speed 61-point AF, approx.

• Page 3: Item Check List

  Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Eyecup Eg Battery Pack Battery Charger Camera LP-E6 LC-E6/LC-E6E* (with body cap) (with protective cover) Interface Cable Stereo AV Cable Wide Strap IFC-200U…

• Page 4: Conventions Used In This Manual

  Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. <5> : Indicates the Quick Control Dial. <9> : Indicates the Multi-controller. <0> : Indicates the Setting button. 0, 9, 7, 8 : Indicates that the corresponding function remains active for 4 sec., 6 sec., 10 sec., or 16 sec.

• Page 5: Table Of Contents

  Chapters For first-time DSLR users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures. Introduction Getting Started Basic Shooting Setting the AF and Drive Modes Image Settings Advanced Operations Flash Photography Shooting with the LCD Monitor (Live View Shooting) Shooting Movies Image Playback Post-Processing Images…

• Page 6
  Contents Introduction Item Check List…………….. 3 Conventions Used in this Manual…………. 4 Chapters………………. 5 Index to Features …………….12 Handling Precautions …………..14 Quick Start Guide …………….16 Nomenclature …………….. 18 Getting Started Charging the Battery …………..28 Installing and Removing the Battery……….30 Installing and Removing the Card ……….
• Page 7
  Contents Basic Shooting A Fully Automatic Shooting (Scene Intelligent Auto) ….64 A Full Auto Techniques (Scene Intelligent Auto) ……67 Setting the AF and Drive Modes f: Selecting the AF Mode …………70 S Selecting the AF Area…………… 72 AF Area Selection Modes …………… 75 About the AF Sensor……………78 Lenses and Usable AF Points…………79 Selecting AI Servo AF Characteristics (For a Subject) ….85…
• Page 8
  Contents Noise Reduction Settings …………. 143 Highlight Tone Priority …………..146 Lens Peripheral Illumination / Chromatic Aberration Correction..147 Creating and Selecting a Folder……….. 150 Changing the File Name…………… 152 File Numbering Methods ………….. 154 Setting Copyright Information…………156 Setting the Color Space …………… 158 Advanced Operations d: Program AE …………….
• Page 9
  Contents Shooting with the LCD Monitor (Live View Shooting) A Shooting with the LCD Monitor ……….198 Shooting Function Settings …………202 Menu Function Settings …………..203 Using AF to Focus ……………. 207 Focusing Manually ……………. 214 Shooting Movies k Shooting Movies …………..218 Autoexposure Shooting …………..218 Shutter-priority AE …………..219 Aperture-priority AE…………..
• Page 10
  Contents k Enjoying Movies …………..259 k Playing Movies …………… 261 X Editing the Movie’s First and Last Scenes ……263 Slide Show (Auto Playback) …………265 Viewing the Images on TV …………268 K Protecting Images…………..272 a Copying Images …………..274 L Erasing Images…………….
• Page 11
  Contents Customizing the Camera Custom Functions ……………..314 Custom Function Settings…………. 315 C.Fn1: Exposure ……………. 315 C.Fn2: Display/Operation …………318 C.Fn3: Others…………….320 82: Custom Controls …………..321 Registering My Menu …………..331 w Register Custom Shooting Modes ……….332 Reference B Button Functions…………..336 Checking the Battery Information……….

• Page 12: Index To Features

  Index to Features Power Charging the battery  p.28 AF mode  p.70 AF area selection mode p.72  Battery check  p.35 AF point selection p.74  Battery information check  p.338 AI Servo AF characteristics  p.85 Power outlet …

• Page 13
  Index to Features Playback Chromatic aberration correction p.148  Image review time  p.55 Color space p.158  Single image display  p.244 Shooting Shooting information display  p.246 Index display  p.249 Shooting mode  p.24 Image browsing (Jump display) …

• Page 14: Handling Precautions

   accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth. Never leave the camera near anything having a strong magnetic field such …

• Page 15
  Handling Precautions LCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision  technology with over 99.99% effective pixels, there may be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction.

• Page 16: Quick Start Guide

  Quick Start Guide Insert the battery (p.30) To charge the battery, see page 28. Insert a card (p.31) The camera-front side slot is for a CF card, and the camera-back side slot is for an SD card. Attach the lens (p.39) Align it with the red dot.

• Page 17
  Quick Start Guide While holding down the center of the Mode Dial, set it to <A> (Scene Intelligent Auto) (p.64) All the necessary camera settings will be set automatically. Focus the subject (p.44) Look through the viewfinder and aim the viewfinder center over the subject.

• Page 18: Nomenclature

  Nomenclature <n> Metering mode selection/ <o> White balance selection button (p.167/137) AF mode selection/ Drive mode selection button <B> AF area selection mode/ (p.70/112) Multi-function button (p.73/188) <m> ISO speed Lens mount index (p.39) setting/Flash exposure compensation button (p.124/188) Flash-sync contacts <U>…

• Page 19
  Nomenclature LCD panel (p.21, 22) <p> AF start button (p.44, 70, 199, 226) Eyecup (p.185) <A> AE lock Viewfinder eyepiece button (p.171) <S> AF point <B> Info button selection (p.60, 61, 200, 225, button (p.72) 244, 336) Power switch (p.34) <Q>…
• Page 20
  Nomenclature <V> Focal plane mark Dioptric adjustment knob (p.43) <b/m> <A/k> Creative Photo/ Live View shooting/ Comparative playback Movie shooting switch (Two-image display)/ (p.197/217) Direct print button <0> Start/Stop button (p.129, 173, 177/253/ (p.198, 218) 301) <9> Multi-controller <c> (p.47) Rating button (p.255, 273) Strap mount…

• Page 21: Lcd Panel

  Nomenclature LCD Panel Aperture Shutter speed FE lock (FEL) AF point selection Busy (buSY) ] AF SEL [ ] SEL AF Multi function lock warning (L) AF point registration No card warning (Card) ] HP SEL [ ] SEL HP Error code (Err) Card warning (Card 1/2/1.2) Cleaning image sensor (CLn)

• Page 22
  Nomenclature <J> SD card selection icon <f> CF card indicator <g> SD card indicator <J> CF card selection icon ISO speed (p.124) <h> AEB (p.170) <g> ISO speed (p.124) Metering mode (p.167) q Evaluative metering <A> Highlight tone w Partial metering priority (p.146) r Spot metering e Center-weighted…

• Page 23: Viewfinder Information

  Nomenclature Viewfinder Information Spot metering circle (p.168) Area AF frame (p.73) Focusing screen <S> Single AF point <O> Spot AF (single point) (p.75) Grid (p.59) <g> ISO speed (p.124) <h> Warning symbol (p.318) <o> Focus <z> Battery check confirmation light (p.35) (p.64) <A>…

• Page 24: Shooting Mode 

  Nomenclature Mode Dial Turn the Mode Dial while holding down the Mode Dial center (Mode Dial lock release button). F : Bulb (p.172) a : Manual exposure (p.166) f : Aperture-priority AE (p.164) s : Shutter-priority AE (p.162) d : Program AE (p.160) A :Scene Intelligent Auto (p.64) Custom shooting modes You can register the shooting mode (d/s/f/a/F), AF mode,…

• Page 25
  Nomenclature EF 24-105mm f/4L IS USM lens Focus mode switch (p.39) Distance scale Infrared index Hood mount (p.41) Zoom ring (p.40) Zoom position index (p.40) 77 mm filter thread (front of lens) Focusing ring (p.111, 214) Contacts (p.15) Image Stabilizer switch (p.42) Lens mount index (p.39)
• Page 26
  Nomenclature Battery Charger LC-E6 Charger for Battery Pack LP-E6 (p.28). Power plug Battery pack slot Charge lamp IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.

• Page 27: Getting Started

  Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration.

• Page 28: Charging The Battery

  Charging the Battery Remove the protective cover. Detach the protective cover provided  with the battery. Attach the battery. As shown in the illustration, attach the  battery securely to the charger. To detach the battery, follow the  above procedure in reverse. Recharge the battery.

• Page 29
  Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged.  Recharge the battery before using. Recharge the battery on the day before or on the day it is to be used. …

• Page 30: Installing And Removing The Battery

  Installing and Removing the Battery Load a fully-charged Battery Pack LP-E6 into the camera. The camera’s viewfinder becomes bright when a battery is installed, and darkens when the battery is removed. Installing the Battery Open the cover. Slide the lever as shown by the …

• Page 31: Installing And Removing The Card

  Installing and Removing the Card The camera can use a CF card and SD card. Images can be recorded when at least one card is installed in the camera. If a card is inserted in both slots, you can select which card to record images to or record the same images simultaneously on both cards (p.116, 118).

• Page 32: Release Shutter Without Card 

  Installing and Removing the Card Close the cover. Close the cover and slide it in the  direction shown by the arrows until it snaps shut.  When you set the power switch to <1> (p.34), the number of possible Card selection icon shots and the loaded card(s) will be displayed on the LCD panel.

• Page 33: Removing The Card

  Installing and Removing the Card Removing the Card Open the cover. Set the power switch to <2>.  Make sure the access lamp is off,  then open the cover. If [Recording …] is displayed, close  the cover. Access lamp Remove the card.

• Page 34: Turning On The Power

  Turning on the Power If you turn on the power switch and the Date/Time/Zone setting screen appears, see page 36 to set the Date/Time/Zone. <1> : The camera turns on. <2> : The camera is turned off and does not operate. Set to this position when not using the camera.

• Page 35: Checking The Battery Level

  Turning on the Power z Checking the Battery Level When the power switch is set to <1>, the battery level will be indicated in one of six levels. A blinking battery icon (b) indicates that the battery will be exhausted soon. Icon Level (%) 100 — 70 69 — 50 49 — 20 19 — 10 9 — 1…

• Page 36: Setting The Date, Time, And Zone

  Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time has been reset, the Date/Time/Zone setting screen will appear. Follow steps 3 to 6 to set the current date, time, and time zone. Note that the date/time appended to recorded images will be based on this date/time setting.

• Page 37
  3 Setting the Date, Time, and Zone Set the date and time. Turn the <5> dial to select the  number. Press <0> so <r> is displayed.  Turn the <5> dial to select the  desired setting, then press <0> (Returns to <s>).

• Page 38: Selecting The Interface Language

  Selecting the Interface Language Display the menu screen. Press the <M> button to display  the menu screen. Under the [52] tab, select [LanguageK]. Press the <Q> button and select the  [5] tab. Turn the <6> dial to select the [52] …

• Page 39: Attaching And Detaching A Lens

  Attaching and Detaching a Lens The camera is compatible with all Canon EF lenses. The camera cannot be used with EF-S lenses. Remove the caps. Remove the rear lens cap and the  body cap by turning them as shown by the arrows.

• Page 40: Zoom 

  Attaching and Detaching a Lens Minimizing Dust When changing lenses, do it quickly in a place with minimal dust.  When storing the camera without a lens attached, be sure to attach the  body cap to the camera. Remove dust on the body cap before attaching it. …

• Page 41
  Attaching and Detaching a Lens Attaching a Lens Hood When the dedicated EW-83H hood is attached to the EF 24-105mm f/4L IS USM lens, it blocks stray light and protects the front of the lens from snow, rain, dust, etc. Before storing the lens in a bag, etc., you can attach the hood in reverse.

• Page 42: About The Lens Image Stabilizer

  About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a sharper shot. The procedure explained here is based on the EF 24-105mm f/4L IS USM lens as an example. * IS stands for Image Stabilizer.

• Page 43: Basic Operation

  Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the  AF points in the viewfinder look sharp. If the knob is difficult to turn, remove  the eyecup (p.185). If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens Eg (sold separately) is recommended.

• Page 44: Shutter Button

  Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder and on the LCD panel (0).

• Page 45: Mode Dial

  Basic Operation Mode Dial Turn the dial while holding down the lock release button at the center of the dial. Main Dial (1) After pressing a button, turn the <6> dial. When you press a button such as <n> <o> <m>, the respective function remains selected for 6 seconds (9).

• Page 46
  Basic Operation Quick Control Dial (1) After pressing a button, turn the <5> dial. When you press a button such as <n> <o> <m>, the respective function remains selected for 6 seconds (9). During this time, you can turn the <5> dial to set the desired setting. When the function selection ends or if you press the shutter button halfway, the camera will be ready to shoot.
• Page 47
  Basic Operation Multi-controller The <9> consists of an eight-direction key and a button at the center. Use it to select the AF point, correct  the white balance, move the AF point or magnifying frame during Live View shooting, scroll around magnified images during playback, operate the Quick Control screen, etc.

• Page 48: Lcd Panel Illumination

  Basic Operation U LCD Panel Illumination Turn on (9)/off the LCD panel illumination by pressing the <U> button. During a bulb exposure, pressing the shutter button completely will turn off the LCD panel illumination. Displaying Shooting Settings After you press the <B> button a number of times, the shooting settings will be displayed.

• Page 49: Q Quick Control For Shooting Functions

  Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor. This is called the Quick Control screen. Press the <Q> button.  The Quick Control screen will appear (7). Set the desired function. Use <9>…

• Page 50
  Q Quick Control for Shooting Functions Settable Functions on Quick Control Screen Aperture (p.164) Auto Lighting Optimizer (p.142) AE lock* (p.171) Shutter speed (p.162) Highlight tone priority* (p.146) Shooting mode* (p.24) ISO speed (p.124) Exposure compensation/ Custom Controls (p.321) AEB setting (p. Picture Style (p.129) Image-recording quality (p.119)

• Page 51: Menu Operations

  Menu Operations With menus, you can set various functions such as the image-recording quality, date/time, etc. While looking at the LCD monitor, use the <M> and <Q> buttons on the camera back and the <6> < > dials. <M> button <6>…

• Page 52
  3 Menu Operations Menu Setting Procedure Display the menu screen. Press the <M> button to display  the menu screen. Select a tab. Each time you press the <Q> button,  the main tab will switch. Turn the <6> dial to select a …

• Page 53: Before You Start

  Before You Start 3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased.

• Page 54
  Before You Start Format the card in the following cases: The card is new.  The card was formatted by a different camera or a computer.  The card is full with images or data.  A card-related error is displayed (p.371). …

• Page 55: Setting The Power-Off Time/Auto Power Off

  Before You Start 3 Setting the Power-off Time/Auto Power Off To save battery power, the camera turns off automatically after a set time of idle operation elapses. If you do not want the camera to turn off automatically, set this to [Disable]. After the power turns off, you can turn on the camera again by pressing the shutter button or other buttons.

• Page 56: Reverting The Camera To The Default Settings

  Before You Start 3 Reverting the Camera to the Default SettingsN The camera’s shooting settings and menu settings can be reverted to their defaults. Select [Clear all camera settings]. Under the [54] tab, select [Clear all  camera settings], then press <0>. Select [OK].

• Page 57
  Before You Start Image-recording Settings AF Settings Image quality Case1/Parameter Picture Style Standard Case 1 — 6* settings of all cases cleared Auto Lighting Standard Optimizer AI Servo 1st image Equal priority priority Peripheral Enable/ illumination Correction data AI Servo 2nd image Equal priority correction retained…

• Page 58: Camera Settings

  Before You Start Camera Settings Live View Shooting Settings Auto power off 1 min. Live View shooting Enable Beep Enable AF mode Live mode Grid display Release shutter Enable without card Aspect ratio Image review 2 sec. Exposure Enable simulation Highlight alert Disable AF point display…

• Page 59: Displaying The Grid And Electronic Level

  Displaying the Grid and Electronic Level You can display a grid and electronic level in the viewfinder and on the LCD monitor to help correct camera tilt. Displaying the Grid in the Viewfinder Select [VF grid display]. Under the [52] tab, select [VF grid …

• Page 60: Electronic Level 

  Displaying the Grid and Electronic Level Displaying the Electronic Level on the LCD Monitor Press the <B> button. Each time you press the <B>  button, the screen display will change. Display the electronic level.  If the electronic level does not …

• Page 61: Feature Guide

  Feature Guide When [zHelp] is displayed at the bottom of the menu screen, the Feature guide can be displayed. The Feature guide is displayed while you hold down the <B> button. If the Feature guide fills two or more screens, a scroll bar will appear on the right edge. To scroll, hold down the <B>…

• Page 63: Basic Shooting

  Basic Shooting This chapter explains how to use the Mode Dial’s <A> (Scene Intelligent Auto) mode for easy picture taking. In the <A> mode, all you do is point and shoot and the camera sets everything automatically (p.346). Also, to prevent botched pictures due to mistaken operations, major shooting settings cannot be changed.

• Page 64: A Fully Automatic Shooting (Scene Intelligent Auto)

  A Fully Automatic Shooting (Scene Intelligent Auto) <A> is a fully-automatic mode. The camera analyzes the scene and sets the optimum settings automatically. Detecting whether the subject is still or moving, it also adjusts focus automatically. Set the Mode Dial to <A>. Turn the Mode Dial while holding …

• Page 65: Lcd Monitor

  A Fully Automatic Shooting (Scene Intelligent Auto) Take the picture. Press the shutter button completely to  take the picture.  The captured image will be displayed for 2 sec. on the LCD monitor. The <A> mode makes the colors look more impressive in nature, outdoor, and sunset scenes.

• Page 66
   Since it is too dark, taking the picture may result in a blurred subject due to camera shake. Using a tripod or a Canon EX-series Speedlite (p.188) (sold separately) is recommended. When flash was used, the bottom part of the picture came out …

• Page 67: A Full Auto Techniques (Scene Intelligent Auto)

  A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <A> mode, while you press the shutter button halfway to focus a still subject, the focus will be locked.

• Page 68: Lcd Monitor

  A Full Auto Techniques (Scene Intelligent Auto) A Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 197. Set the Live View shooting/Movie shooting switch to <A>. Display the Live View image on the LCD monitor.

• Page 69: Setting The Af And Drive Modes

  Setting the AF and Drive Modes The 61 AF points in the viewfinder make AF shooting suitable for a wide variety of subjects and scenes. You can also select the AF mode and drive mode that best match the shooting conditions and subject. A M icon at the upper right of a page title indicates that the …

• Page 70: F: Selecting The Af Mode

  f: Selecting the AF ModeN You can select the AF mode to suit the shooting conditions or subject. In the <A> mode, “AI Focus AF” is set automatically. On the lens, set the focus mode switch to <AF>. Press the <o> button. Select the AF mode.

• Page 71: Ai Servo Af For Moving Subjects

  f: Selecting the AF ModeN If focus cannot be achieved, the focus confirmation light <o> and AF status  indicator <e> in the viewfinder will blink. If this occurs, the picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try to focus again.

• Page 72: S Selecting The Af Area

  S Selecting the AF AreaN 61 AF points are provided for AF. You can select the AF point(s) suiting the scene or subject. Depending on the lens attached to the camera, the number of usable AF points and AF point patterns will differ. For details, see “Lenses and Usable AF Points”…

• Page 73
  S Selecting the AF AreaN AF point expansion (Manual selection, surrounding points) The manually-selected AF point <S> and the surrounding AF points <w> are used to focus. Zone AF (Manual selection of zone) The 61 AF points are divided into nine zones for focusing.

• Page 74: Af Point Selection 

  S Selecting the AF AreaN Selecting the AF Point Manually You can manually select the AF point or zone. With 61-point automatic selection AF, you can set the starting AF point for AI Servo AF. Press the <S> button.  The AF points will be displayed in the viewfinder.

• Page 75: Af Area Selection Modes

  AF Area Selection ModesN Single-point Spot AF (Manual selection) Although this is the same as single-point AF, the selected AF point <O> covers a smaller area to focus. Effective for pinpoint focusing of overlapping subjects such as an animal in a cage. Since Spot AF covers a very small area, focusing may be difficult during hand-held shooting or for a moving subject.

• Page 76
  AF Area Selection ModesN AF point expansion (Manual selection, surrounding points) The manually-selected AF point <S> and adjacent AF points <w> are used to focus. The AF point expansion is larger than with AF point expansion (Manual selection ), so the focusing is executed over a wider area.
• Page 77
  AF Area Selection ModesN 61-point automatic selection AF All the AF points are used to focus. This mode is set automatically in the <A> mode. With One-Shot AF, pressing the shutter button halfway will display the AF point(s) <S> that achieved focus.

• Page 78: About The Af Sensor

  About the AF Sensor The camera’s AF sensor has 61 AF points. The illustration below shows the AF sensor pattern corresponding to each AF point. With f/2.8 or larger maximum aperture lenses, high-precision AF is possible at the viewfinder center. Depending on the lens attached to the camera, the number of usable AF points and AF pattern will differ.

• Page 79: Lenses And Usable Af Points

  Both “Extender EF 1.4x” and “Extender EF 2x” apply to all the I/II/III  models. Regarding new lenses marketed after the EOS 5D Mark III, check  Canon’s Web site to see which group they belong to. Some lenses may not be available in certain countries or regions.

• Page 80
  Lenses and Usable AF Points EF 400mm f/2.8L II USM EF 16-35mm f/2.8L USM EF 28-70mm f/2.8L USM EF 400mm f/2.8L IS USM EF 16-35mm f/2.8L II USM EF 70-200mm f/2.8L USM EF 400mm f/2.8L IS II USM EF 17-35mm f/2.8L USM EF 70-200mm f/2.8L IS USM TS-E 45mm f/2.8* EF 20-35mm f/2.8L…
• Page 81
  Lenses and Usable AF Points EF 200mm f/1.8L USM EF 50mm f/2.5 Compact Macro TS-E 24mm f/3.5L* + Extender EF 2x EF 200mm f/2L IS USM EF 100mm f/2.8 Macro TS-E 24mm f/3.5L II* + Extender EF 2x EF 200mm f/2.8L USM EF 100mm f/2.8L Macro IS USM EF 8-15mm f/4L Fisheye USM + Extender EF 1.4x…
• Page 82
  Lenses and Usable AF Points Group E Autofocusing with 61 points is possible. All of the AF area selection modes are selectable. : Cross-type AF point. Subject tracking is superior and high- precision focusing is achieved. : AF points sensitive to horizontal lines.
• Page 83
  Lenses and Usable AF Points EF 70-200mm f/2.8L USM EF 70-300mm f/4.5-5.6 DO IS USM EF 80-200mm f/4.5-5.6 + Extender EF 2x EF 70-200mm f/2.8L IS USM EF 75-300mm f/4-5.6 EF 90-300mm f/4.5-5.6 + Extender EF 2x EF 70-200mm f/2.8L IS II USM EF 75-300mm f/4-5.6 USM EF 90-300mm f/4.5-5.6 USM + Extender EF 2x…
• Page 84
  Lenses and Usable AF Points Group G Autofocusing with only 33 points is possible. (Not possible with all 61 AF points.) All of the AF area selection modes are selectable. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 61-point automatic selection AF.

• Page 85: Selecting Ai Servo Af Characteristics (For A Subject)

  Selecting AI Servo AF Characteristics (For a Subject)N You can easily fine-tune AI Servo AF to suit a particular subject or scene just by selecting between case 1 to case 6. This feature is called the “AF Configuration Tool.” Select the [21] tab. Select a case.

• Page 86
  3 Selecting AI Servo AF Characteristics (For a Subject)N Case 1: Versatile multi purpose setting Standard setting suited for any moving subject. Works with many subjects and scenes. Select [Case 2] to [Case 6] in the following cases: when obstacles enter AF points, when the subject tends to stray from AF points, when you want to Default settings…
• Page 87
  3 Selecting AI Servo AF Characteristics (For a Subject)N Case 3: Instantly focus on subjects suddenly entering AF points Once an AF point starts tracking the subject, this setting enables the camera to focus consecutive subjects at different distances. If a new subject appears in front of the target subject, the camera will start focusing the new subject.
• Page 88
  3 Selecting AI Servo AF Characteristics (For a Subject)N Case 5: For erratic subjects moving quickly in any direction Even if the target subject moves dramatically up, down, left, or right, the AF point will switch automatically to focus-track the subject. Effective for shooting subjects that move dramatically up, down, left, or right.
• Page 89
  3 Selecting AI Servo AF Characteristics (For a Subject)N Case 6: For subjects that change speed and move erratically Geared for tracking moving subjects whose speed can change dramatically and suddenly. Also, if the target subject moves dramatically up, down, left or right and it is difficult to focus, the AF point switches automatically to track the subject.
• Page 90
  3 Selecting AI Servo AF Characteristics (For a Subject)N About the Parameters Tracking sensitivity  Sets the subject-tracking sensitivity during AI Servo AF when an obstacle enters the AF points or when the AF points stray from the subject. Standard setting suited for most moving subjects. [Locked on: -2 / Locked on: -1] The camera will try to continue focusing the subject even if an obstacle enters the AF points or if the subject strays from the AF…
• Page 91
  3 Selecting AI Servo AF Characteristics (For a Subject)N Accel./decel. tracking  This sets the tracking sensitivity for moving subjects whose speed can suddenly change dramatically by starting or stopping suddenly, etc. Suited for subjects that move at a fixed speed. [+2 / +1] Effective for subjects having sudden movements, sudden acceleration/deceleration, or sudden stops.
• Page 92
  3 Selecting AI Servo AF Characteristics (For a Subject)N AF pt auto switching  This sets the switching sensitivity of the AF points as they track the subject moving dramatically up, down, left, or right. This setting takes effect in the following AF area selection modes: AF point expansion (Manual selection ), AF…
• Page 93
  3 Selecting AI Servo AF Characteristics (For a Subject)N Changing Cases’ Parameter Settings You can adjust each case’s three parameters (1. Tracking sensitivity, 2. Accel./decel. tracking, and 3. AF pt auto switching) as desired. Select a case. Turn the <5> dial to select the icon …

• Page 94: Customizing Af Functions

  Customizing AF FunctionsN With the [22] to [25] menu tabs, you can set the AF functions to suit your shooting style or subject. 22: AI Servo AI Servo 1st image priority You can set the AF operation characteristics and shutter-release timing for the first shot during continuous shooting with AI Servo AF.

• Page 95
  3 Customizing AF FunctionsN AI Servo 2nd image priority You can set the AF operation characteristics and shutter-release timing during continuous shooting after the first shot with AI Servo AF. : Equal priority Equal priority is given to focusing and continuous shooting speed.
• Page 96
  3 Customizing AF FunctionsN 23: One Shot USM lens electronic MF For the lenses below, which have an electronic focusing ring, you can set whether to use the electronic focusing ring. EF 50mm f/1.0L USM EF 300mm f/2.8L USM EF 600mm f/4L USM EF 85mm f/1.2L USM EF 400mm f/2.8L USM EF 1200mm f/5.6L USM…
• Page 97
  3 Customizing AF FunctionsN AF-assist beam firing Enables or disables the EOS-dedicated Speedlite’s AF-assist beam. ON: Enable The external Speedlite emits the AF- assist beam when necessary. OFF: Disable The external Speedlite will not emit the AF-assist beam. This prevents the AF- assist beam from disturbing others.
• Page 98
  3 Customizing AF FunctionsN Lens drive when AF impossible If focus cannot be achieved with autofocus, you can have the camera keep searching for the correct focus or have it stop searching. ON: Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the correct focus.
• Page 99
  3 Customizing AF FunctionsN : 15 points Fifteen major AF points will be manually selectable. : 9 points Nine major AF points will be manually selectable. With a lens from groups F to H (p.83, 84), the number of manually selectable AF points will be fewer.

• Page 100: Main Dial

  3 Customizing AF FunctionsN : Manual select.:Zone AF The 61 AF points are divided into nine zones for focusing. : Auto selection: 61 pt AF All of the AF points are used for focusing. The <X> mark cannot be deleted from [Manual selection:1 pt AF]. …

• Page 101
  3 Customizing AF FunctionsN Orientation linked AF point You can set the AF area selection mode and manually-selected AF point separately for vertical shooting and horizontal shooting. : Same for both vert/horiz The same AF area selection mode and manually-selected AF point (or Zone) are used for both vertical shooting and horizontal shooting.
• Page 102
  3 Customizing AF FunctionsN Manual AF point selection pattern During manual AF point selection, the selection can either stop at the outer edge or it can move to the opposite AF point. This function works in AF area selection modes other than 61-point automatic selection AF and Zone AF.
• Page 103
  3 Customizing AF FunctionsN If [Selected (pre-AF, focused)] or [Selected (focused)] is set, the AF point will not be displayed even when focus is achieved with AI Servo AF. VF display illumination The AF points and grid in the viewfinder can be illuminated in red when focus is achieved.

• Page 104: Fine Adjustment Of Af’s Point Of Focus (Af Microadjustment)

  Fine Adjustment of AF’s Point of FocusN Fine adjustment of the AF’s point of focus is possible for viewfinder shooting and Live View shooting in the Quick mode. This is called “AF Microadjustment”. Before making the adjustment, read “Notes for AF Microadjustment”…

• Page 105
  3 Fine Adjustment of AF’s Point of FocusN Make the adjustment. Turn the <5> dial to make the  adjustment. The adjustable range is ±20 steps. Setting it toward “–: ” will shift the  point of focus in front of the standard point of focus.
• Page 106
  3 Fine Adjustment of AF’s Point of FocusN Adjust by Lens You can make the adjustment for each lens and register the adjustment in the camera. You can register the adjustment for up to 40 lenses. When you autofocus with a lens whose adjustment has been registered, the point of focus will always be shifted by the adjustment amount.
• Page 107
  3 Fine Adjustment of AF’s Point of FocusN Enter the serial number. Turn the <5> dial to select the digit,  then press <0> to display <r>. Turn the <5> dial to enter the  number, then press <0>. After entering all the digits, turn the …
• Page 108
  3 Fine Adjustment of AF’s Point of FocusN Make the adjustment. Single focal length lens For a zoom lens, turn the <5> dial and  select the wide-angle (W) or telephoto (T) end. Pressing <0> will turn off the purple frame and make the adjustment possible.
• Page 109
  3 Fine Adjustment of AF’s Point of FocusN Clearing All AF Microadjustments When [ Clear all] appears at the bottom of the screen, pressing the <L> button will clear all the adjustments made for [All by same amount] and [Adjust by lens]. Notes for AF Microadjustment The AF’s point of focus will vary slightly depending on the subject …

• Page 110: When Autofocus Fails

  When Autofocus Fails Autofocus can fail to achieve focus (viewfinder’s focus confirmation light <o> blinks) with certain subjects such as the following: Subjects difficult to focus Very low-contrast subjects  (Example: Blue sky, solid-color walls, etc.) Subjects in very low light …

• Page 111: Mf: Manual Focusing

  When Autofocus Fails MF: Manual Focusing Set the lens focus mode switch to <MF>.  <4 L> will be displayed on the LCD panel. Focus the subject. Focusing ring Focus by turning the lens focusing  ring until the subject looks sharp in the viewfinder.

• Page 112: Selecting The Drive Mode

  i Selecting the Drive Mode Single and continuous drive modes are provided. Press the <o> button. Select the drive mode. While looking at the LCD panel, turn  the <5> dial. u : Single shooting When you press the shutter button completely, only one shot will be taken.

• Page 113: Using The Self-Timer

  j Using the Self-timer If <B> or <M> is set, the time lag from when you press the shutter  button completely until the picture is taken will be longer than normal. When the battery level is low, the continuous shooting speed may become slightly slower. …

• Page 114
  j Using the Self-timer If you will not look through the viewfinder when you press the shutter button, attach the eyepiece cover (p.185). If stray light enters the viewfinder when the picture is taken, it may throw off the exposure. The <k>…

• Page 115: Image Settings

  Image Settings This chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, lens peripheral illumination correction, chromatic aberration correction, and other functions. A M icon at the upper right of a page title indicates that the …

• Page 116: Selecting The Card For Recording And Playback

  Selecting the Card for Recording and Playback If either a CF card or SD card is already inserted, you can start shooting. When only one card is inserted, the procedures described on pages 116 to 118 are not necessary. If you insert both a CF card and SD card, you can select the recording method and select which card to use for recording and playing back images.

• Page 117
  3 Selecting the Card for Recording and Playback Standard  Images will be recorded to the card selected with [Record/play]. Auto switch card  Same as with the [Standard] setting, but if the card becomes full, the camera will automatically switch to the other card to record images.
• Page 118
  3 Selecting the Card for Recording and Playback Selecting the CF or SD Card for Recording and Playback If [Record func.] is set to [Standard] or [Auto switch card], select the card for recording and playing images. If [Record func.] is set to [Rec. separately] or [Rec. to multiple], select the card for playing images.

• Page 119: Setting The Image-Recording Quality

  Setting the Image-Recording Quality You can select the pixel count and the image quality. There are eight JPEG image-recording quality settings: 73, 83, 74, 84, 7a, 8a, b, c. There are three RAW image quality settings: 1, 41, 61 (p.122). Select [Image quality].

• Page 120
  3 Setting the Image-Recording Quality Image-recording Quality Setting Examples 73 only 1 only 1 + 73 If [–] is set for both RAW and JPEG, 73 will be set.  The number of possible shots will be displayed up to 1999 on the LCD …
• Page 121
  The file size, possible shots, and maximum burst during continuous shooting  are based on Canon’s testing standards (3:2 aspect ratio, ISO 100 and Standard Picture Style) using an 8 GB CF card. These figures will vary depending on the subject, card brand, aspect ratio, ISO speed, Picture Style, Custom Functions, and other settings.
• Page 122
  3 Setting the Image-Recording Quality If you select both RAW and JPEG, the same image will be recorded  simultaneously to the card in both RAW and JPEG at the image- recording quality that was set. The two images will be recorded with the same file numbers (file extension .JPG for JPEG and .CR2 for RAW).

• Page 123: Maximum Burst 

  3 Setting the Image-Recording Quality One-touch Image Quality Setting With Custom Controls, you can assign the image-recording quality to the <B> button or depth-of-field preview button so you can switch to it momentarily. If you assign [One-touch image quality setting] to the <B>…

• Page 124: I: Setting The Iso Speed

  i: Setting the ISO SpeedN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. With the <A> mode selected, the ISO speed will be set automatically (p.125). Regarding the ISO speed during movie shooting, see pages 221 and 224. Press the <m>…

• Page 125: Iso Auto

  i: Setting the ISO SpeedN As H1 (equivalent to ISO 51200) and H2 (equivalent to 102400) are  expanded ISO speed settings, noise (dots of light, banding, etc.) and irregular colors will be more noticeable, and the resolution lower than usual. If you use a high ISO speed and flash to shoot a close subject, …

• Page 126
  i: Setting the ISO SpeedN 3 Setting the ISO Speed Range You can set the manually-settable ISO speed range (minimum and maximum limits). You can set the minimum limit within L (ISO 50) to H1 (ISO 51200), and the maximum limit within ISO 100 to H2 (ISO 102400). Select [ISO speed settings].

• Page 127: Setting The Iso Speed Range For Auto Iso

  i: Setting the ISO SpeedN 3 Setting the ISO Speed Range for Auto ISO You can set the automatic ISO speed range for Auto ISO within ISO 100 — 25600. You can set the minimum limit within ISO 100 — 12800, and the maximum limit within ISO 200 — 25600 in whole-stop increments.

• Page 128: Setting The Minimum Shutter Speed For Auto Iso

  i: Setting the ISO SpeedN 3 Setting the Minimum Shutter Speed for Auto ISO When Auto ISO is set, you can set the minimum shutter speed (1/250 sec. to 1 sec.) so that the automatically-set shutter speed is not too slow.

• Page 129: A Selecting A Picture Style

  A Selecting a Picture StyleN By selecting a Picture Style, you can obtain image characteristics matching your photographic expression or the subject. The Picture Style is set automatically to <D> (Auto) in the <A> mode. Press the <b> button. Select [A]. Turn the <5>…

• Page 130
  A Selecting a Picture StyleN Picture Style Characteristics D Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid, especially for blue skies, greenery, and sunsets in nature, outdoor, and sunset scenes. P Standard The image looks vivid, sharp, and crisp.

• Page 131: About The Symbols

  A Selecting a Picture StyleN V Monochrome Creates black-and-white images. Black-and-white images shot in JPEG cannot be reverted to color. If you want to later shoot pictures in color, make sure the [Monochrome] setting has been canceled. When [Monochrome] is selected, <0> will appear on the LCD panel.

• Page 132: A Customizing A Picture Style

  A Customizing a Picture StyleN You can customize a Picture Style by adjusting individual parameters such as [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 134. Press the <b> button. Select [A]. Turn the <5>…

• Page 133
  A Customizing a Picture StyleN Set the parameter. Turn the <5> dial to set the  parameter as desired, then press <0>. Press the <M> button to save the  adjusted parameters. The Picture Style selection screen will reappear.  Any settings different from the default will be displayed in blue.
• Page 134
  A Customizing a Picture StyleN V Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. kFilter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.

• Page 135: A Registering A Picture Style

  A Registering a Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as sharpness and contrast are different.

• Page 136
  A Registering a Picture StyleN Select a parameter. Turn the <5> dial to select a  parameter such as [Sharpness], then press <0>. Set the parameter. Turn the <5> dial to set the  parameter as desired, then press <0>. For details, see “Customizing a Picture Style”…

• Page 137: B: Setting The White Balance

  B: Setting the White BalanceN White balance (WB) is for making the white areas look white. Normally, the <Q> (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with <Q>, you can select the white balance to match the light source or set it manually by shooting a white object.

• Page 138: O Custom White Balance

  B: Setting the White BalanceN O Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Do this procedure under the actual light source to be used. Photograph a white object. The plain, white object should fill the …

• Page 139: P Setting The Color Temperature

  B: Setting the White BalanceN If the exposure obtained in step 1 differs greatly from the standard  exposure, a correct white balance may not be obtained. In step 3, the following images cannot be selected: images captured  while the Picture Style was set to [Monochrome], multiple-exposure images, and images taken with another camera.

• Page 140: White Balance Correction

  u White Balance CorrectionN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users who are familiar with using color temperature conversion or color compensating filters.

• Page 141: White Balance Auto Bracketing

  u White Balance CorrectionN White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias.

• Page 142: Correcting The Brightness And Contrast Automatically (Auto Lighting Optimizer)

  Correcting the Brightness and Contrast AutomaticallyN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. [Standard] is automatically set in the <A>…

• Page 143: Noise Reduction Settings

  Noise Reduction SettingsN High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. At low ISO speeds, the noise in the shadow areas is further reduced.

• Page 144: Take The Picture

  3 Noise Reduction SettingsN Long Exposure Noise Reduction Noise reduction is possible with images exposed for 1 sec. or longer. Select [Long exp. noise reduction]. Under the [z3] tab, select [Long  exp. noise reduction], then press <0>. Set the desired setting. Turn the <5>…

• Page 145
  3 Noise Reduction SettingsN With [Auto] and [Enable], after the picture is taken, the noise reduction  process may take the same amount of time as the exposure. During noise reduction, shooting is still possible as long as the maximum burst indicator in the viewfinder shows “1”…

• Page 146: Highlight Tone Priority

  Highlight Tone PriorityN You can minimize overexposed highlight areas. Select [Highlight tone priority]. Under the [z3] tab, select  [Highlight tone priority], then press <0>. Select [Enable]. Turn the <5> dial to select [Enable],  then press <0>. Highlight details are improved. The …

• Page 147: Lens Peripheral Illumination / Chromatic Aberration Correction

  Lens Peripheral Illumination / Chromatic Aberration Correction Peripheral light fall-off occurs in lenses whose characteristics make the image corners look darker. Color fringing along subject outlines also is a chromatic aberration. Light fall-off and color fringing can be corrected. The default setting is [Enable] for both corrections. Peripheral Illumination Correction Select [Lens aberration correction].

• Page 148: Correction 

  3 Lens Peripheral Illumination / Chromatic Aberration Correction Chromatic Aberration Correction Select the setting. Check that [Correction data  available] is displayed for the attached lens. Turn the <5> dial to select  [Chromatic aberration], then press <0>. Select [Enable], then press <0>. …

• Page 149
  Corrections cannot be applied to JPEG images captured when [Disable]  was set. When using a non-Canon lens, setting the corrections to [Disable] is  recommended, even if [Correction data available] is displayed. If you use the magnified view during Live View shooting, the peripheral …

• Page 150: Creating And Selecting A Folder

  Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Creating a Folder Select [Record func+card/folder sel.].

• Page 151: Selecting A Folder

  3 Creating and Selecting a Folder Selecting a Folder With the folder selection screen  Lowest file number displayed, turn the <5> dial to select Number of images the desired folder, then press <0>. in folder  The folder where the captured images will be saved is selected.

• Page 152: Changing The File Name

  Changing the File Name The file name has four alphanumeric characters followed by a four-digit image BE3B0001.JPG (Ex.) number (p.154) and extension. The first four alphanumeric characters are set upon factory shipment and unique to the camera. However, you can change them. With “User setting1”, you can change and register the four characters as desired.

• Page 153
  3 Changing the File Name Exit the setting. Enter the required number of  alphanumeric characters, then press the <M> button.  The new file name will be registered and the screen in step 2 will reappear. Select the registered file name. Turn the <5>…

• Page 154: File Numbering Methods

  File Numbering Methods The four-digit file number is like the frame number on a roll of film. The captured images BE3B0001.JPG (Ex.) are assigned a sequential file number from 0001 to 9999 and saved in one folder. You can change how the file number is assigned. Select [File numbering].

• Page 155: Lcd Monitor

  3 File Numbering Methods Auto Reset The file numbering restarts from 0001 each time the card is replaced or a new folder is created. When you replace the card, create a folder, or switch the target card (such as f → g), the file numbering continues in sequence from 0001 for the images saved.

• Page 156: Setting Copyright Information

  Setting Copyright InformationN When you set the copyright information, it will be recorded to the image as Exif information. Select [Copyright information]. Under the [54] tab, select [Copyright  information], then press <0>. Select the option to be set. Turn the <5> dial, select either …

• Page 157
  3 Setting Copyright InformationN Checking the Copyright Information When you select [Display copyright info.] in step 2 on the preceding page, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2 on the preceding page, you can delete the [Author] and [Copyright] information.

• Page 158: Setting The Color Space

  Setting the Color SpaceN The range of reproducible colors is called the color space. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. The color space is set automatically to sRGB in the <A> mode. Select [Color space].

• Page 159: Advanced Operations

  Advanced Operations In the d/s/f/a/F shooting modes, you can select the shutter speed, aperture, and other camera settings to change the exposure and obtain the desired result. AM icon at the upper right of a page title indicates that the …

• Page 160: D: Program Ae

  d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * <d> stands for Program. * AE stands for autoexposure. Set the Mode Dial to <d>. Focus the subject. Look through the viewfinder and aim …

• Page 161
  d: Program AE If the “30″” shutter speed and the maximum aperture  blink, it indicates underexposure. Increase the ISO speed or use flash. If the “8000” shutter speed and the minimum aperture  blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.

• Page 162: S: Shutter-Priority Ae

  s: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure suiting the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action or a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion.

• Page 163
  s: Shutter-Priority AE If the maximum aperture blinks, it indicates  underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the minimum aperture blinks, it indicates …

• Page 164: F: Aperture-Priority Ae

  f: Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure suiting the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.

• Page 165: Depth Of Field Preview

  f: Aperture-Priority AE If the “30″” shutter speed blinks, it indicates  underexposure. Turn the <6> dial to set a larger aperture (lower f/number) until the shutter speed blinking stops or set a higher ISO speed. If the “8000” shutter speed blinks, it indicates …

• Page 166: A: Manual Exposure

  a: Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available exposure meter. This method is called manual exposure. * <a>…

• Page 167: Selecting The Metering Mode

  q Selecting the Metering ModeN In [z2: Auto Lighting Optimizer], if the checkmark <X> for [Disable  during man expo] is removed, it can be set in the <a> mode (p.142). When ISO Auto is set, you can press the <A> button to lock the ISO speed. …

• Page 168
  q Selecting the Metering ModeN Spot metering This is for metering a specific spot of the subject or scene. The metering is weighted at the center covering approx. 1.5% of the viewfinder area. Center-weighted average metering The metering is weighted at the center and then averaged for the entire scene.

• Page 169: Setting Exposure Compensation

  Setting Exposure CompensationN Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation can be set in the d/s/f shooting modes. Although you can set the exposure compensation up to ±5 stops in 1/3- stop increments, the exposure compensation indicator in the viewfinder and on the LCD panel can only display the setting up to ±3 stops.

• Page 170: Auto Exposure Bracketing (Aeb)

  h Auto Exposure Bracketing (AEB)N By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three successive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. Select [Expo.comp./AEB].

• Page 171: A Ae Lock

  A AE LockN Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <A> button to lock the exposure, then recompose and take the shot.

• Page 172: F: Bulb Exposures

  F: Bulb Exposures When bulb is set, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.

• Page 173: W: Hdr (High Dynamic Range) Shooting

  w: HDR (High Dynamic Range) ShootingN You can take artistic photos having a high dynamic range and preserving detail in highlight and shadow areas. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures (standard exposure, underexposure, and overexposure) are captured for each shot and then merged together automatically.

• Page 174
  w: HDR (High Dynamic Range) ShootingN About Effects Natural  For images preserving a wide tonal range where the highlight and shadow detail would otherwise be lost. Art standard  While the highlight and shadow detail will be better preserved than with [Natural], the contrast will be lower and the gradation flatter to have the picture look like a painting.
• Page 175
  w: HDR (High Dynamic Range) ShootingN Set [Continuous HDR]. Select either [1 shot only] or [Every  shot], then press <0>. With [1 shot only], HDR shooting will  be canceled automatically after the shooting ends. With [Every shot], HDR shooting …
• Page 176
  w: HDR (High Dynamic Range) ShootingN Using a tripod is recommended. For handheld shooting, using a fast  shutter speed is recommended. HDR shooting of a moving subject is not recommended because the  movement of the subject will appear as afterimages in the merged image.

• Page 177: P Multiple Exposures

  P Multiple ExposuresN If you You can shoot two to nine exposures to be merged into one image. shoot multiple-exposure images with Live View shooting (p.197), you can see how the single exposures merge while shooting. Press the <b> button. Select multiple exposure.

• Page 178
  P Multiple ExposuresN Set [Multi-expos ctrl]. Select the desired multiple-exposure  control method, then press <0>. Additive  The exposure of each single exposure is added cumulatively. Based on the [No. of exposures], set a negative exposure compensation. Refer to the basic guide below to set a negative exposure compensation. Exposure Compensation Setting Guide for Multiple Exposures Two exposures: -1 stop, three exposures: -1.5 stop, four exposures: -2 stops…
• Page 179
  P Multiple ExposuresN Set the images to be saved. To save all the single exposures and  the merged multiple-exposure image, select [All images], then press <0>. To save only the merged multiple-  exposure image, select [Result only], then press <0>. Set [Continue Mult-exp].
• Page 180
  P Multiple ExposuresN Shoot subsequent exposures.  When [On:Func/Ctrl] is set, the merged multiple-exposure image will be displayed. With Live View shooting, the multiple-exposure images merged  so far will be displayed. By pressing the <B> button, you can display only the Live View image. After you shoot the set number of exposures, multiple-exposure …
• Page 181
  P Multiple ExposuresN Merging multiple exposures with an image recorded in the card You can select an image recorded in the card as the first single exposure. The original of the selected image will remain intact. You can only select 1 images. You cannot select 41/61 or JPEG images.
• Page 182
  P Multiple ExposuresN You can also select a 1 multiple-exposure image as the first single  exposure. If you select [Deselect img], the selected image will be canceled.  Checking and Deleting Multiple Exposures During Shooting When [On:Func/ctrl] is set and you have not finished shooting the set number of exposures, you can press the <x>…
• Page 183
  P Multiple ExposuresN Are there any restrictions on the image-recording quality?  All JPEG image-recording quality settings can be selected. If 41 or 61 is set, the merged multiple-exposure will be a 1 image. Image-Recording Merged Multiple- Single Exposures Quality Setting Exposure JPEG JPEG…

• Page 184: Mirror Lockup

  2 Mirror LockupN Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations (mirror shock) can also help when you use a super telephoto lens or shoot close ups (macro photography). Set [Mirror lockup] to [Enable]. Under the [z1] tab, select [Mirror lockup], then press <0>.

• Page 185: Using The Eyepiece Cover

  Using the Eyepiece Cover When you use the self-timer or shoot bulb exposures and do not look through the viewfinder, stray light entering the viewfinder can cause the image to come out dark. To prevent this, use the eyepiece cover (p.27) attached to the camera strap.

• Page 186: R Remote Control Shooting

  R Remote Control Shooting With Remote Controller RC-6 (sold separately), you can shoot remotely up to approx. 5 meters/16.4 feet from the camera. You can either shoot immediately or use a 2-sec. delay. You can also use Remote Controller RC-1 and RC-5. Focus the subject.

• Page 187: Flash Photography

  Flash Photography This chapter explains how to shoot with an EOS- dedicated, EX-series Speedlite (sold separately) or non- Canon flash unit and how to set flash functions on the camera’s menu screen.

• Page 188: D Flash Photography

  D Flash Photography EOS-dedicated, EX-series Speedlites An EX-series Speedlite (sold separately) makes flash photography as easy as normal shooting. For detailed instructions, refer to the EX-series Speedlite’s instruction manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites. To set the flash functions and flash Custom Functions with the camera’s menu, see pages 191-196.

• Page 189: Using Non-Canon Flash Units

  Cautions for Live View shooting If you use a non-Canon flash unit with Live View shooting, set [z4: Silent LV shoot.] to [Disable] (p.206). The flash will not fire if it is set to [Mode 1] or [Mode 2].

• Page 190
  D Flash Photography If the camera is used with a flash unit or flash accessory dedicated to  another camera brand, the camera may not operate properly and malfunction may result. Do not connect to the camera’s PC terminal any flash unit requiring …

• Page 191: Setting The Flash

  Setting the FlashN With an EX-series Speedlite having compatible flash function settings, you can use the camera’s menu screen to set the Speedlite’s functions and Custom Functions. Attach the Speedlite to the camera and turn on the Speedlite. For details on the Speedlite’s functions, refer to the Speedlite’s instruction manual.

• Page 192
  3 Setting the FlashN [Flash sync. speed in Av mode] You can set the flash-sync speed for flash photography in the aperture-priority AE (f) mode. : Auto  The flash sync speed is set automatically within a range of 1/200 sec.

• Page 193: Flash Function Settings

  3 Setting the FlashN [Flash function settings] On the screen, the settable functions and the display will differ depending on the Speedlite, current flash mode, flash Custom Function settings, etc. For details on your Speedlite’s flash functions, refer to the Speedlite’s instruction manual.

• Page 194
  3 Setting the FlashN Wireless functions  Wireless (multiple) flash shooting is possible with radio or optical transmission. For details on wireless flash, refer to the Speedlite’s instruction manual. Flash zoom (Flash coverage)  With Speedlites having a zooming flash head, you can set the flash coverage.

• Page 195: Flash Exposure Compensation

  3 Setting the FlashN Flash exposure compensation  The same setting as “Flash exposure compensation” on page 188 can be set. For details, refer to the Speedlite’s instruction manual. Flash exposure bracketing  While the flash output is changed automatically, three shots are taken. For details on FEB (Flash Exposure Bracketing), refer to the Speedlite’s instruction manual.

• Page 196: Flash Custom Function Settings

  3 Setting the FlashN Flash Custom Function Settings For details on the Speedlite’s Custom Functions, refer to the Speedlite’s instruction manual. Select [Flash C.Fn settings]. Select [Flash C.Fn settings], then  press <0>. Set the functions. Turn the <5> dial to select the …

• Page 197: Shooting With The Lcd Monitor (Live View Shooting)

  Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the picture on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is enabled by setting the Live View shooting/ Movie shooting switch to <A>. Live View shooting is effective for photos of still subjects.

• Page 198: A Shooting With The Lcd Monitor

  A Shooting with the LCD Monitor Set the Live View shooting/Movie shooting switch to <A>. Display the Live View image. Press the <0> button.   The Live View image will appear on the LCD monitor. The Live View image will closely reflect the …

• Page 199: Lcd Monitor

  A Shooting with the LCD Monitor Enabling Live View Shooting Set [z4: Live View shoot.] to [Enable]. In the <A> mode, it is displayed under [z2]. Battery Life with Live View Shooting Temperature At 23°C / 73°F At 0°C / 32°F Possible shots Approx.

• Page 200: Lcd Monitor

  A Shooting with the LCD Monitor About the Information Display Each time you press the <B> button, the information display will  change. AF mode Auto Lighting Optimizer • d : Live mode Eye-Fi card transmission status • c : Face detection Live AF point (Live mode) mode GPS connection indicator…

• Page 201: Lcd Monitor

  A Shooting with the LCD Monitor Final Image Simulation The final image simulation reflects the effects of the Picture Style, white balance, etc., in the Live View image so you can see what the captured image will look like. During shooting, the Live View image will automatically reflect the function settings listed below.

• Page 202: Shooting Function Settings

  Shooting Function Settings i / y / f / R / B / S / A Settings While the Live View image is displayed, if you press the <m>, <o>, <n>, <S>, or <b> button, the setting screen will appear on the LCD monitor and you can turn the <6> or <5> dial to set the respective shooting function.

• Page 203: Menu Function Settings

  Menu Function Settings Function settings particular to Live View shooting are explained here. The menu options under the [z4] tab are explained on pages 203-206. In the <A> mode, it is displayed under [z2]. The functions settable on this menu screen only apply during Live View shooting.

• Page 204: Aspect Ratio 

  3 Menu Function Settings Aspect ratioN  The image’s aspect ratio can be set to [3:2], [4:3], [16:9], or [1:1]. The area surrounding the Live View image is masked in black when the following aspect ratios are set: [4:3] [16:9] [1:1]. JPEG images will be saved with the set aspect ratio.

• Page 205: Lcd Monitor

  3 Menu Function Settings For asterisked image-recording quality, the pixel count does not exactly  match the set aspect ratio. The image area displayed for the asterisked aspect ratio is slightly larger  than the recorded area. Check the captured images on the LCD monitor when shooting.

• Page 206
  If you use flash, silent shooting will not be possible regardless of the  [Silent LV shoot.] setting. When using a non-Canon flash unit, set it to [Disable]. The flash will not  fire if it is set to [Mode 1] or [Mode 2].

• Page 207: Using Af To Focus

  Using AF to Focus Selecting the AF Mode The AF modes available are [Live mode], [u Live mode] (face detection, p.208), and [Quick mode] (p.212). If you want to achieve precise focus, set the lens focus mode switch to <MF>, magnify the image, and focus manually (p.214). Select the AF mode.

• Page 208: Lcd Monitor

  Using AF to Focus Focus the subject. Aim the AF point over the subject and  press the shutter button halfway.  When focus is achieved, the AF point will turn green and the beeper will sound.  If focus is not achieved, the AF point will turn orange.

• Page 209
  Using AF to Focus Focus the subject. Press the shutter button halfway and  the camera will focus the face covered by the <p> frame.  When focus is achieved, the AF point will turn green and the beeper will sound.
• Page 210
  Using AF to Focus Live Mode and u (Face Detection) Live Mode Notes AF operation Focusing will take slightly longer.  Even when focus has been achieved, pressing the shutter button  halfway will focus again. The image brightness may change during and after the AF …
• Page 211
  EF 28mm f/2.8, EF 35mm f/2, EF 50mm f/1.4 USM, EF 50mm f/1.8 II, EF 50mm f/2.5 Compact Macro, EF 135mm f/2.8 (Softfocus), EF 75-300mm f/4-5.6 III, EF 75-300mm f/4-5.6 III USM For information on discontinued lenses, refer to your local Canon website.

• Page 212: Lcd Monitor

  Using AF to Focus Quick Mode: f The dedicated AF sensor is used to focus in One-Shot AF mode (p.70), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation.

• Page 213
  Using AF to Focus Select the AF point. The AF point selection will change in  the direction you tilt the <9>. If you press <9> straight down, the center AF point (or center Zone) will be selected. You can also use the <6> and <5> …

• Page 214: Focusing Manually

  Focusing Manually You can magnify the image and focus precisely with manual focus. Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus  roughly. Move the magnifying frame. Use <9> to move the magnifying …

• Page 215
  Live View Shooting Cautions Image Quality When you shoot at high ISO speeds, noise (dots of light, banding, etc.)  may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image.  If Live View shooting is used continuously for a long period, the camera’s …

• Page 216: Lcd Monitor

  Live View Shooting Cautions Live View Image Under low- or bright-light conditions, the Live View image may not reflect  the brightness of the captured image. If the light source within the image changes, the screen may flicker. If this …

• Page 217: Shooting Movies

  Shooting Movies Movie shooting is enabled by setting the Live View shooting/ Movie shooting switch to <k>. The movie recording format will be MOV. Cards that can record movies When shooting movies, use a large-capacity card with a  fast writing/reading speed as shown in the table. Compression CF Card SD Card…

• Page 218: Shooting Movies

  k Shooting Movies Autoexposure Shooting When the shooting mode is set to <A>, <d>, or <F>, autoexposure control will take effect to suit the scene’s current brightness. Exposure control will be the same for the three shooting modes. Set the Mode Dial to <A>, <d>, or <F>.

• Page 219: Shutter-Priority Ae

  k Shooting Movies Shutter-priority AE When the shooting mode is <s>, you can manually set the shutter speed for movie shooting. The ISO speed and aperture will be set automatically to suit the brightness and obtain a standard exposure. Set the Mode Dial to <s>. Set the Live View shooting/Movie shooting switch to <k>.

• Page 220: Aperture-Priority Ae

  k Shooting Movies Aperture-priority AE When the shooting mode is <f>, you can manually set the aperture for movie shooting. The ISO speed and shutter speed will be set automatically to suit the brightness and obtain a standard exposure. Set the Mode Dial to <f>. Set the Live View shooting/Movie shooting switch to <k>.

• Page 221
  k Shooting Movies ISO speed in the A mode In the A mode, the ISO speed will be set automatically within ISO  100 — 12800. ISO speed in the d, s, f, and F modes The ISO speed will be set automatically within ISO 100 — 12800. …

• Page 222: Instruction Manual

  k Shooting Movies Notes for Autoexposure, Shutter-priority AE, and Aperture-priority You can lock the exposure (AE lock) by pressing the <A> button  (except in the A mode, p.171). After applying AE lock during movie shooting, you can cancel it by pressing the <S> button. (AE lock setting is retained until you press <S>) You can set exposure compensation by setting the <R>…

• Page 223: Manual Exposure Shooting

  k Shooting Movies Manual Exposure Shooting You can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. Set the Mode Dial to <a>. Set the Live View shooting/Movie shooting switch to <k>.

• Page 224
  k Shooting Movies ISO speed during manual-exposure shooting With [Auto] (A), the ISO speed will be set automatically within ISO  100 — 12800. You can set the ISO speed manually within ISO 100 — 12800 in 1/3-  stop increments. Under [z2: ISO speed settings], if you set [ISO speed range]’s [Maximum] setting to [25600/H], the maximum ISO speed for manual ISO speed setting will be expanded to H (equivalent to 25600).

• Page 225: Information Display

  k Shooting Movies Information Display Each time you press the <B> button, the information display will  change. AF mode Picture Style •d : Live mode Auto Lighting Optimizer •c : Face detection Live mode Time code •f: Quick mode AF point (Live mode) Shooting mode Recording movie…

• Page 226
  k Shooting Movies Notes on Movie Shooting The camera cannot autofocus continuously like a camcorder.  Autofocusing during movie shooting may momentarily throw the focus far  off or change the exposure. During movie shooting, do not point the lens toward the sun. The sun’s …
• Page 227
  k Shooting Movies Notes on Movie Shooting By connecting stereo headphones (commercially available) equipped  with a 3.5 mm mini plug to the camera’s headphone terminal (p.19), you can listen to the sound during movie shooting. You can use Remote Controller RC-6 (sold separately, p.186) to start …

• Page 228: Shooting Still Photos

  k Shooting Movies Shooting Still Photos While shooting a movie, you can also take a still photo by pressing the shutter button completely. Taking still photos during movie shooting If you take a still photo during movie shooting, the movie will record …

• Page 229
  k Shooting Movies AEB cannot be used.  Even if an external Speedlite is used, it will not fire.  Continuous still photo shooting is possible during movie shooting.  However, the captured images will not be displayed on the screen. Depending on the still photo’s image-recording quality, number of shots during continuous shooting, card performance, etc., movie shooting may stop automatically.

• Page 230: Shooting Function Settings

  Shooting Function Settings f / R / B / i / S / A Settings If you press the <o>, <n>, <m>, <S>, or <b> button while the image is displayed on the LCD monitor, the setting screen will appear on the LCD monitor and you can turn the <6> or <5>…

• Page 231: Setting The Movie-Recording Size

  Setting the Movie-Recording Size With [z4: Movie rec. size], you can set the movie’s image size, frame rate per second, and compression method. The frame rate switches automatically depending on the [53: Video system] setting. In the <A> mode, these menu options are displayed under [z2].

• Page 232
  3 Setting the Movie-Recording Size Total Movie Recording Time and File Size Per Minute Total Recording Time (approx.) Movie-Recording File Size Size (approx.) 4 GB Card 8 GB Card 16 GB Card 16 min. 32 min. 1 hr. 4 min. 235 MB/min.
• Page 233
  3 Setting the Movie-Recording Size An increase of the camera’s internal temperature may cause movie  shooting to stop before the maximum recording time shown in the preceding page (p.241). Even if [Record func.] is set to [Auto switch card], the card cannot be …

• Page 234: Setting The Sound Recording

  Setting the Sound Recording You can shoot movies while recording sound with the built-in monaural microphone or a commercially-available stereo microphone. You can also freely adjust the sound-recording level. Set the sound recording with [z4: Sound recording]. In the <A> mode, this setting is displayed in [z2].

• Page 235
  3 Setting the Sound Recording Using the microphone  The built-in microphone records monaural sound. Stereo sound recording is possible by connecting an external stereo microphone (commercially-available) equipped with a miniature stereo plug (3.5 mm) to the camera’s external microphone IN terminal (p.19). When an external microphone is connected, sound recording will switch automatically to the external microphone.

• Page 236: Silent Control

  Silent Control This function is convenient when you want to change the ISO speed, sound- recording level, etc., silently while shooting a movie. When [z5: Silent Control] is set to [Enable h], you can use the touch pad <h> on the inner ring of the Quick Control Dial.

• Page 237: Setting The Time Code

  Setting the Time Code The time code is a time reference recorded automatically to synchronize the video and audio during movie shooting. It is recorded at all times in the following units: hours, minutes, seconds, and frames. It is mainly used during movie editing.

• Page 238
  3 Setting the Time Code Regardless of the [Movie rec count] setting, the time code will always be recorded to the movie file. Movie Playback Count You can select what to display on the movie playback screen. [Rec time] : Displays the recording time and playback time during movie playback.

• Page 239: Menu Function Settings

  Menu Function Settings [z4] Menu When the Live View shooting/Movie shooting switch is set to <k>, the [z4] and [z5] tabs dedicated to movie shooting will be displayed. The menu options are as follows. In the <A> mode, [z2] and [z3] will be displayed.

• Page 240
  3 Menu Function Settings Silent LV shootingN  This function applies to still photo shooting. For details, see page 206. Metering timerN  You can change how long the exposure setting is displayed (AE lock time). [z5] Menu Time code …

• Page 241: Lcd Monitor

  Movie Shooting Cautions White <s> and Red <E> Internal Temperature Warning Icons If the camera’s internal temperature increases due to prolonged movie  shooting or a high ambient temperature, a white icon <s> will appear. Even if you shoot a movie while this icon is displayed, the movie’s image quality will hardly be affected.

• Page 242
  Movie Shooting Cautions Recording and Image Quality If you use a card having a slow writing speed, a five-level  indicator may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory).

• Page 243: Image Playback

  Image Playback This chapter explains how to play back and erase photos and movies, how to display them on a TV screen, and other playback-related functions. About images taken with another camera The camera may not be able to properly display images captured with a different camera or edited with a computer or whose file name was changed.

• Page 244: Image Playback

  x Image Playback Single-Image Display Play back the image. Press the <x> button.   The last captured image or last image viewed will appear. Select an image. To play back images starting with the  last image, turn the <5> dial counterclockwise.

• Page 245: Grid Display

  x Image Playback Exit the image playback. Press the <x> button to exit the  image playback and return to shooting-ready state. 3 Grid Display In single-image display and two-image display (p.253) display, you can overlay the grid on the image playback. With [33: Playback grid], you can select [3×3 l], [6×4 m], or [3×3+diag This function is convenient for checking…

• Page 246: B: Shooting Information Display

  B: Shooting Information Display Sample Information for Still Photos AF Microadjustment Protect images Exposure compensation amount Rating Flash exposure Folder number — File number compensation amount Card Aperture Histogram Shutter speed (Brightness/RGB) Picture Style/Settings Metering mode Shooting mode ISO speed Highlight tone priority White balance Color space…

• Page 247
  B: Shooting Information Display Sample Information for Movies Shooting time, Playback time/ Time code Playback Shutter speed Aperture Shooting mode Movie file size Movie recording size Frame rate Compression method About the Highlight Alert  When [33: Highlight alert] is set to [Enable], overexposed highlight areas will blink.
• Page 248
  B: Shooting Information Display About the Histogram  The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. The display can be switched with [33: Histogram disp]. [Brightness] Display Sample Histograms This histogram is a graph showing the distribution of the image’s brightness level.

• Page 249: H I Searching For Images Quickly

  x Searching for Images Quickly H Display Multiple Images on One Screen (Index Display) You can search for images quickly with the index display showing four or nine images on one screen. Press the <u> button. During image playback, press the …

• Page 250
  x Searching for Images Quickly Jump through Images (Jump Display) With the single image display, you can turn the <6> dial to jump through the images forward or back according to the jump method set. Select [Image jump w/6]. Under the [32] tab, select [Image …

• Page 251: Magnified View

  u Magnified View You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. Magnify the image. The image can be magnified during  image playback (single-image display), during image review after image capture, and from shooting-ready state. Press the <u>…

• Page 252
  u Magnified View 3 Magnification Settings Under the [33] tab, when you select [Magnificatn (apx)], you can set the starting magnification and initial position for the magnified view. 1x (no magnification)  The image will not be magnified. The magnified view will start with the single-image display.

• Page 253: Comparing Images (Two-Image Display)

  X Comparing Images (Two-Image Display) You can compare two images side by side on the LCD monitor. Set the two-image display. During image playback, press the  <m> button.  Two images will be displayed. The currently-selected image will be highlighted in a blue frame.

• Page 254: Rotating The Image

  b Rotating the Image You can rotate the displayed image to the desired orientation. Select [Rotate image]. Under the [31] tab, select [Rotate  image], then press <0>. Select an image. Turn the <5> dial to select the  image to be rotated. You can also select an image on the …

• Page 255: Setting Ratings

  Setting Ratings You can rate images and movies with one of five rating marks: l/m/ n/o/p. This function is called rating. Set ratings with the <c> Button Select an image or movie. During image playback, turn the  <5> dial to select an image or movie to be rated.

• Page 256
  Setting Ratings Select an image or movie. Turn the <5> dial to select the  image or movie to be rated. If you press the <u> button and turn  the <6> dial counterclockwise, you can select an image or movie from a three-image display.

• Page 257: Q Quick Control During Playback

  Q Quick Control During Playback During playback, you can press the <Q> button to set the following: [K: Protect images], [b: Rotate image], [9: Rating], [R: RAW image processing (RAW images only)], [S: Resize] (JPEG image only), [ : Highlight alert], [ :AF point display], [e: Image jump w/6].

• Page 258
  Q Quick Control During Playback To rotate an image, set [51: Auto rotate] to [OnzD]. If [51: Auto rotate] is set to [OnD] or [Off], the [b Rotate image] setting will be recorded to the image, but the camera will not rotate the image for display. Pressing the <Q>…

• Page 259: Enjoying Movies

  k Enjoying Movies You can play back movies in the following three ways: Playback on a TV set (p.268, 271) Use the provided AV cable or an HDMI Cable HTC-100 (sold separately) to connect the camera to a TV set. Then you can play back captured movies and still photos on the TV.

• Page 260
  k Enjoying Movies Playback and Editing with a Personal Computer (p.390) The movie files recorded on the card can be transferred to a personal computer and played with ImageBrowser EX. To have the movie play back smoothly on a personal computer, use a …

• Page 261: Playing Movies

  k Playing Movies Play back the image. Press the <x> button to display  images. Select a movie. Turn the <5> dial to select the  movie to be played. With the single-image display, the  <1s> icon displayed on the upper left indicates a movie.

• Page 262
  k Playing Movies Function Playback Description 2 Exit Returns to the single-image display. 7 Play Pressing <0> toggles between play and stop. Adjust the slow motion speed by turning the <5> dial. 8 Slow motion The slow-motion speed is indicated on the upper right. 5 First frame Displays the movie’s first frame.

• Page 263: Editing The Movie’s First And Last Scenes

  X Editing the Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in 1-sec. increments. On the movie playback screen, select [X].  The movie editing panel will be displayed at the bottom of the screen. Specify the part to be edited out.

• Page 264
  X Editing the Movie’s First and Last Scenes Save the movie. Select [W], then press <0>.   The save screen will appear. To save it as a new movie, select  [New file]. To save it and overwrite the original movie file, select [Overwrite].

• Page 265: Slide Show (Auto Playback)

  Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. Select [Slide show]. Under the [32] tab, select [Slide  show], then press <0>. Select the images to be played. Number of images to be played Turn the <5>…

• Page 266
  3 Slide Show (Auto Playback) Item Playback Description All the still photos and movies on the card will be played jAll images back. Still photos and movies taken on the selected shooting iDate date will be played back. Still photos and movies in the selected folder will be nFolder played back.

• Page 267: Start The Slide Show

  3 Slide Show (Auto Playback) Start the slide show. Turn the <5> dial to select [Start],  then press <0>.  After [Loading image…] is displayed, the slide show will start. Quit the slide show. To quit the slide show and return to …

• Page 268: Viewing The Images On Tv

  Viewing the Images on TV You can view the still photos and movies on a TV set. Adjust the movie’s sound volume with the TV set. The sound volume  cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and …

• Page 269: Lcd Monitor

  Viewing the Images on TV Press the <x> button.  The image will appear on the TV screen. (Nothing will be displayed on the camera’s LCD monitor.) The images will automatically be  displayed at the TV’s optimum resolution. By pressing the <B> button, you …

• Page 270
  Viewing the Images on TV Connect the camera to a TV set. Use an HDMI cable to connect the  camera to the TV.  The TV’s input will switch automatically to the HDMI port connected to the camera. Press the camera’s <x> button. …

• Page 271: Lcd Monitor

  Viewing the Images on TV Viewing on Non High-Definition (HD) TV Sets Connect the provided AV cable to the camera. With the plug’s <Canon> logo facing  the back of the camera, insert it into the <q> terminal. Connect the AV cable to the TV (Red) set.

• Page 272: K Protecting Images

  K Protecting Images Protecting an image prevents it from being erased accidentally. 3 Protecting a Single Image Select [Protect images]. Under the [31] tab, select [Protect  images], then press <0>. Select [Select images]. Select [Select images], then press  <0>.

• Page 273: Protecting All Images In A Folder Or Card

  K Protecting Images 3 Protecting All Images in a Folder or Card You can protect all the images in a folder or on a card at one time. Under [31: Protect images], when you select [All images in folder] or [All images on card], all the images in the folder or on a card will be protected.

• Page 274: Copying Images

  a Copying Images The images recorded on one card can be copied to the other card. 3 Copying Individual Images Select [Image copy]. Under the [31] tab, select [Image  copy], then press <0>. Select [Sel.Image]. Check the copy source and target …

• Page 275
  a Copying Images Select the images to be copied. Total images selected Turn the <5> dial to select an image  to be copied, then press <0>.  The <X> icon will appear on the upper left of the screen. If you press the <u>…
• Page 276
  a Copying Images Select [OK]. Check the copy source and target  card’s information. Turn the <5> dial to select [OK],  then press <0>.  The copying will start and the progress will be displayed. When the copying is completed, the …

• Page 277: L Erasing Images

  L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.272) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.

• Page 278
  L Erasing Images Select [Select and erase images]. Select [Select and erase images],  then press <0>.  The images will be displayed. If you press the <u> button and turn  the <6> dial counterclockwise, you can select an image from a three-image display.

• Page 279: Changing Image Playback Settings

  Changing Image Playback Settings 3 Adjusting the LCD Monitor Brightness The LCD monitor’s brightness is adjusted automatically for optimum viewing. You can set the automatic adjustment’s brightness level (brighter or darker) or adjust the brightness manually. Select [LCD brightness]. Under the [52] tab, select [LCD …

• Page 280: Auto Rotation Of Vertical Images

  Changing Image Playback Settings 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and on the personal computer instead of horizontally. The setting of this feature can be changed.

• Page 281: Post-Processing Images

  Post-Processing Images You can process RAW images with the camera or resize (shrink) JPEG images. A M icon at the upper right of a page title indicates that the  function can be used when the Mode Dial is set to <d/s/ f/a/F>.

• Page 282: R Processing Raw Images With The Camera

  R Processing RAW Images with the CameraN You can process 1 images with the camera and save them as JPEG images. While the RAW image itself does not change, you can process the RAW image according to different conditions to create any number of JPEG images from it.

• Page 283
  R Processing RAW Images with the CameraN Displaying the setting screen Press <0> to display the setting  screen. Turn the <5> or <6> dial to change the setting. To return to the screen in step 3, press <0>. Save the image. Select [W] (Save), then press <0>.

• Page 284: Brightness Adjustment

  R Processing RAW Images with the CameraN RAW Image-processing Options Brightness adjustment  You can adjust the image brightness up to ±1 stop in 1/3-stop increments. The displayed image will reflect the setting’s effect. White balance (p.137)  You can select the white balance. If you select [P], turn the <6> dial to set the color temperature on the setting screen.

• Page 285: Distortion Correction

  R Processing RAW Images with the CameraN Color space (p.158)  You can select either sRGB or Adobe RGB. Since the camera’s LCD monitor is not compatible with Adobe RGB, the image will not look very different when either color space is set. Peripheral illumination correction (p.147) …

• Page 286: Chromatic Aberration Correction

  R Processing RAW Images with the CameraN Chromatic aberration correction  When [Enable] is set, the lens’ chromatic aberrations (color fringing along the subject’s outline) can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, press the <u>…

• Page 287: S Resize

  S Resize You can resize an image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3/4/a/b images. JPEG c and RAW images cannot be resized. Select [Resize]. Under the [32] tab, select [Resize], …

• Page 288
  S Resize Resize Options According to Original Image Size Available Resize Settings Original Image Size About Image Sizes The image size displayed in step 3 on the preceding page, such as [**M ****x****], has a 3:2 aspect ratio. The image size according to aspect ratios is shown in the table below.

• Page 289: Sensor Cleaning

  If visible spots still remain after the automatic sensor cleaning, having the sensor cleaned by a Canon Service Center is recommended. Even while the Self Cleaning Sensor Unit is operating, you can press the shutter button halfway to interrupt the cleaning and start shooting immediately.

• Page 290: Automatic Sensor Cleaning

  f Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation.

• Page 291: Appending Dust Delete Data

  Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later.

• Page 292: Photograph A Solid-White Object

  3 Appending Dust Delete DataN Photograph a solid-white object. At a distance of 20 cm — 30 cm (0.7 ft.  — 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture.  The picture will be taken in aperture- priority AE mode at an aperture of f/22.

• Page 293: Manual Sensor Cleaning

  Before cleaning the sensor, detach the lens from the camera. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Select [Sensor cleaning].

• Page 294
  If the battery level becomes low while you clean the sensor, the beeper  will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the  sensor cleaned by a Canon Service Center is recommended.

• Page 295: Printing Images And Transferring Images To A Computer

  Printing Images and Transferring Images to a Computer Printing (p.298)  You can connect the camera directly to a printer and print out the images on the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. Digital Print Order Format (DPOF) (p.305) …

• Page 296: Preparing To Print

  Preparing to Print The direct printing procedure can be performed entirely with the camera while you look at the LCD monitor. Connecting the Camera to a Printer Set the camera’s power switch to <2>. Set up the printer. For details, refer to the printer’s …

• Page 297
  Preparing to Print Play back the image. PictBridge Press the < > button.   The image will appear, and the <w> icon will appear on the upper left to indicate that the camera is connected to a printer. Movies cannot be printed. …

• Page 298: Wprinting

  wPrinting The screen display and setting options will differ depending on the printer. Some settings may not be available. For details, refer to the printer’s instruction manual. Printer-connected icon Select the image to be printed. Check that the <w> icon is …

• Page 299
  wPrinting Q Setting the Paper Size Select the size of the paper loaded in  the printer, then press <0>.  The paper type screen will appear. Y Setting the Paper Type Select the type of the paper loaded in …

• Page 300: Set The Printing Effects

  wPrinting Set the printing effects. Set if necessary. If you do not need to  set any printing effects, go to step 5. What is displayed on the screen  differs depending on the printer. Select the option, then press <0>. …

• Page 301: Start Printing

  wPrinting Set the date and file number imprinting. Set if necessary.  Select < >, then press <0>.  Set as desired, then press <0>.  Set the number of copies. Set if necessary.  Select < >, then press <0>. …

• Page 302
  wPrinting e Adjustment of Printing Effects In step 4 on page 300, select the printing effect. When the <e> icon is displayed brightly next to <z>, you can press the <B> button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.

• Page 303: Trimming The Image

  wPrinting Trimming the Image You can crop the image and print only Tilt correction the trimmed portion as if the image was recomposed. Set the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again before printing.

• Page 304: Error Messages

  wPrinting Depending on the printer, the trimmed image area may not be printed as  you specified. The smaller you make the trimming frame, the grainier the picture will  look in the print. While trimming the image, look at the camera’s LCD monitor. If you look …

• Page 305: W Digital Print Order Format (Dpof)

  W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file number imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options Select [Print order].

• Page 306
  W Digital Print Order Format (DPOF) Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Print type Both Prints both the standard and index prints. Date [On] imprints the recorded date on the print. File number [On] imprints the file number on the print.

• Page 307: Print Ordering

  W Digital Print Order Format (DPOF) Print Ordering Sel.Image  Select and order images one by one. If you press the <u> button and turn the <6> dial counterclockwise, you can select an image from a three-image display. To return to the single-image display, turn the <6>…

• Page 308: W Direct Printing With Dpof

  W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. Prepare to print. See page 296. Follow the “Connecting the Camera to a Printer”  procedure up to step 5. Under the [31] tab, select [Print order]. Select [Print].

• Page 309: Transferring Images To A Personal Computer

  d Transferring Images to a Personal Computer You can connect the camera to a personal computer and operate the camera to transfer images on the card to the personal computer. This is called direct image transfer. The direct image transfer can be performed with the camera while you look at the LCD monitor.

• Page 310: Transferring Raw+Jpeg Images

  d Transferring Images to a Personal Computer Set the camera’s power switch to <1>. When the personal computer displays  a screen to select the program, select [EOS Utility].  The EOS Utility screen will appear on the personal computer. After the EOS Utility screen appears, do not operate EOS Utility.

• Page 311
  d Transferring Images to a Personal Computer 3 Select the Images to be Transferred Sel.Image  Select [Image transfer]. Under the [32] tab, select [Image  transfer], then press <0>. Select [Image sel./transfer]. Select [Image sel./transfer], then  press <0>. Select [Sel.Image].
• Page 312
  d Transferring Images to a Personal Computer Transfer the image. On the computer screen, check that  EOS Utility’s top screen is displayed. Select [Direct transfer], then press <0>.  On the confirmation screen, select  [OK] and the images will be transferred to the personal computer.

• Page 313: Customizing The Camera

  Customizing the Camera You can customize various camera features to suit your picture-taking preferences with Custom Functions. Also, the current camera settings can be saved under the Mode Dial’s <w>, <x>, and <y> positions. The features explained in this chapter can be set and used in the following shooting modes: d/s/f/a/…

• Page 314: Custom Functions

  Custom FunctionsN A LV k Movie Shooting Shooting C.Fn1: Exposure Exposure level increments ISO speed setting increments p.315 In a Bracketing auto cancel (Still photo, with WB Bracketing sequence bracketing p.316 Number of bracketed shots set) Safety shift p.317 C.Fn2: Display/Operation Warnings z in viewfinder p.318 LV shooting area display…

• Page 315: Custom Function Settings

  Custom Function SettingsN Under the [8] tab, you can customize various camera features to suit your picture-taking preferences. Any settings different from the default will be displayed in blue. C.Fn1: Exposure Exposure level increments 1/3: 1/3-stop 1/2: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc.

• Page 316
  3 Custom Function SettingsN Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed. 0-+: 0, -, + -0+: -, 0, + +0-: +, 0, — White Balance Bracketing B/A Direction M/G Direction 0 : Standard exposure 0 : Standard white balance 0 : Standard white balance — : Decreased exposure — : Blue bias — : Magenta bias…

• Page 317: Safety Shift 

  3 Custom Function SettingsN Safety shift OFF: Disable Tv/Av: Shutter speed/Aperture This takes effect in the shutter-priority AE (s) and aperture-priority AE (f) modes. If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually-selected setting to obtain a standard exposure.

• Page 318: C.fn2: Display/Operation

  3 Custom Function SettingsN C.Fn2: Display/Operation Warnings z in viewfinder When any of the following functions are set, the <h> icon can be displayed on the viewfinder’s bottom right (p.23). Select the function for which you want the warning icon to appear, press <0>…

• Page 319
  3 Custom Function SettingsN Dial direction during Tv/Av Normal Reverse direction The dial’s turning direction for setting the shutter speed and aperture can be reversed. In the <a> shooting mode, the turning direction of the <6> and <5> dial will be reversed. In the other shooting modes, the turning direction of only the <6>…

• Page 320: C.fn3: Others

  3 Custom Function SettingsN C.Fn3: Others Add cropping information If you set cropping information, vertical lines for the aspect ratio you have set will appear on the Live View image. You can then compose the shot as if you were shooting with a medium- or large-format camera (6×6 cm, 4×5 inch, etc.).

• Page 321: 82: Custom Controls

  82: Custom Controls You can assign frequently-used functions to camera buttons or dials according to your preferences. Select [82: Custom Controls]. Under the [82] tab, select [Custom  Controls], then press <0>.  The Custom Controls screen will appear. Select a camera button or dial. Turn the <5>…

• Page 322
  82: Custom Controls Assignable Functions to Camera Controls Function Page Metering and AF start AF stop Switch to registered AF function ONE SHOT z AI SERVO Switch to registered AF point AF point direct selection Metering start AE lock AE lock (while button pressed) AE lock (hold) FE lock Set ISO speed (hold button, turn…
• Page 323
  82: Custom Controls * The AF stop button ( ) is provided only on super telephoto IS lenses.

• Page 324: Metering And Af Start Af Stop

  82: Custom Controls : Metering and AF start When you press the button assigned to this function, metering and AF are executed. *1: If you assign the [Metering and AF start] function to the <p> and <A> buttons and add the function to switch to the registered AF point, you can instantly switch to the registered AF point.

• Page 325: Af Stop K K

  82: Custom Controls : AF stop The AF will stop while you hold down the button assigned to this function. Convenient when you want to lock the focus during AI Servo : Switch to registered AF function After setting AF area selection mode (p.72), Tracking sensitivity (p.90), Acceleration/deceleration tracking (p.91), AF point auto switching (p.92), AI Servo 1st image priority (p.94), and AI Servo 2nd image priority (p.95) and assigning this function to a button, you can apply…

• Page 326: Switch To Registered Af Point

  82: Custom Controls : Switch to registered AF point During metering, when you press the button assigned to this function, the camera will switch to the AF point registered on page 324. *3: In step 3 on page 321, when you press the <B> button, you can select [Switch only when btn is held] or [Switch each time btn is pressed].

• Page 327: Fe Lock K K

  82: Custom Controls : FE lock During flash photography, pressing the button assigned to this function will fire a preflash and record the required flash output (FE lock). : Set ISO speed (hold button, turn You can set the ISO speed by holding down <0> and turning the <6>…

• Page 328: One-Touch Image Quality Setting

  82: Custom Controls : One-touch image quality setting When you press the button assigned to this function, you can switch to the image-recording quality set here. While the camera switches the image-recording quality, the image-recording quality will blink on the LCD panel.

• Page 329: Depth-Of-Field Preview

  82: Custom Controls : Depth-of-field preview When you press the depth-of-field preview button, the aperture will stop down and you can check the depth of field (p.165). : IS start With the lens’ IS switch set to <1>, the lens’ Image Stabilizer operates when you press the button assigned to this function.

• Page 330: Menu Display

  82: Custom Controls : Menu display Pressing <0> will display the menu on the LCD monitor. : Image playback Pressing <0> will play back images. : Magnify/Reduce (press SET, turn Press <0> to magnify the images recorded on the card. See p.251 for the operation procedure.

• Page 331: Registering My Menu

  Registering My MenuN Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. Select [My Menu settings]. Under the [9] tab, select [My Menu  settings], then press <0>. Select [Register to My Menu].

• Page 332: Register Custom Shooting Modes

  w Register Custom Shooting ModesN You can register current camera settings, such as the shooting mode, menu functions, and Custom Function settings, as Custom shooting modes under the Mode Dial’s <w>, <x>, and <y> positions. Select [Custom shooting mode (C1-C3)]. Under the [54] tab, select [Custom …

• Page 333
  w Register Custom Shooting ModesN Settings Registered Shooting functions  Shooting mode + exposure setting, ISO speed, AF mode, AF area selection mode, AF point, Metering mode, Drive mode, Exposure compensation amount, Flash exposure compensation amount Menu functions  [z1] Image quality, Image review, Beep, Release shutter without card, Lens aberration correction (Peripheral illumination correction, Chromatic aberration correction), External Speedlite control, Mirror lockup…

• Page 334: Button Function

  w Register Custom Shooting ModesN [x2] Slide show, Image jump with 6 [x3] Highlight alert, AF point disp., Playback grid, Histogram display, Movie play count, Magnificatn (approx.) [51] File numbering, Auto rotate, Eye-Fi settings [52] Auto power off, LCD brightness, VF grid display [53] Sensor cleaning (Auto cleaning), z button display options, m button function [81] Exposure level increments, ISO speed setting increments,…

• Page 335: Reference

  Reference This chapter provides reference information for camera features, system accessories, etc.

• Page 336: B Button Functions

  B Button Functions When you press the <B> button while the camera is ready to shoot, you can display [Displays camera settings], [Electronic level] (p.60), and [Displays shooting functions] (p.337). Under the [53] tab, [z button display options] enables you to select the options displayed when the <B>…

• Page 337: Shooting Settings

  B Button Functions Shooting Settings White balance correction Aperture AE lock Shutter speed Flash exposure compensation Shooting mode ISO speed Exposure level indicator Highlight tone priority Custom Controls Picture Style AF mode Image-recording quality Possible shots Quick Control icon Battery check Remaining number of White balance exposures (multiple…

• Page 338: Checking The Battery Information

  Purchasing a new battery is recommended. The use of a genuine Canon Battery Pack LP-E6 is recommended. If you use any battery other than the Battery Pack LP-E6, the camera’s full performance may not be attained or malfunction may result.

• Page 339
  3 Checking the Battery Information Registering the Battery to the Camera You can register up to six LP-E6 battery packs to the camera. To register multiple battery packs to the camera, do the procedure below for each battery pack. Press the <B> button. With the battery info.
• Page 340
  3 Checking the Battery Information Labeling the Serial No. on the Battery Affixing a serial number label onto all the registered Battery Pack LP- E6’s makes it convenient. Write the serial number on a Serial No. label. Write the serial number displayed on …
• Page 341
  3 Checking the Battery Information Checking the Remaining Capacity of a Registered Battery Pack You can check the remaining capacity of any battery pack (even when not installed) and also when it was last used. Look for the serial number. Serial No.

• Page 342: Using A Household Power Outlet

  Using a Household Power Outlet With the AC Adapter Kit ACK-E6 (sold separately), you can connect the camera to a household power outlet and not worry about the remaining battery level. Connect the DC Coupler’s plug. Connect the DC Coupler’s plug to the …

• Page 343: Replacing The Date/Time Battery

  Replacing the Date/Time Battery The date/time (backup) battery maintains the camera’s date and time. Its service life is approx. 5 years. If the date/time is reset when camera is turned on, follow the procedure below to replace the backup battery with a new CR1616 lithium battery.

• Page 344: Using Eye-Fi Cards

  Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card’s manufacturer.

• Page 345
  Using Eye-Fi Cards Check the [Access point SSID:]. Check that an access point is  displayed for [Access point SSID:]. You can also check the Eye-Fi card’s  MAC address and firmware version. Press the <M> button to exit the …

• Page 346: Function Availability Table According To Shooting Mode

  Function Availability Table According to Shooting Mode o: Set automatically k: User selectable : Not selectable/Disabled Still Photos Movies Function d s f a All image quality settings selectable k k k k k k Except Automatically set/Auto ISO k k k k k ISO speed Manual k k k k k…

• Page 347
  Function Availability Table According to Shooting Mode Still Photos Movies Function d s f a Auto k k k k k AF point selection With f (except A) Manual k k k k k AF-assist beam k k k k k Manual focusing (MF) k k k k k k AF Configuration Tool…

• Page 348: Menu Settings

  Menu Settings For Viewfinder Shooting and Live View Shooting z: Shooting 1 (Red) Page 1 / 41 / 61 Image quality 73 / 83 / 74 / 84 / 7a / 8a / b / c Image review Off / 2 sec. / 4 sec. / 8 sec. / Hold Beep Enable / Disable Release shutter…

• Page 349
  Menu Settings z: Shooting 2 (Red) Page Exposure 1/3-stop increments, ±5 stops (AEB ±3 stops) compensation/AEB ISO speed / ISO speed range / Auto ISO range / ISO speed settings Minimum shutter speed Disable / Low / Standard / High Auto Lighting Optimizer Disable during manual exposure…
• Page 350
  Menu Settings z: Shooting 4* (Red) Page Live View shooting Enable / Disable Live mode / u Live mode / Quick mode AF mode Off / 3×3 l / 6×4 m / 3×3+diag n Grid display Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 Exposure simulation Enable / During e / Disable Silent LV shooting…
• Page 351
  Menu Settings 2: AF3 (Purple) Page Enable after One-Shot AF / Disable after One- USM lens electronic MF Shot AF / Disable in AF mode AF-assist beam firing Enable / Disable / IR AF assist beam only One-Shot AF release Release priority / Focus priority priority 2: AF4 (Purple)
• Page 352
  Menu Settings 3: Playback 1 (Blue) Page Protect images Erase-protect images Rotate image Rotate vertical images Erase images Erase images Print order Specify images to be printed (DPOF) Image copy Copy images between cards RAW image processing Process 1 images 3: Playback 2 (Blue) Resize Downsize the image’s pixel count…
• Page 353
  Menu Settings 5: Set-up 1 (Yellow) Page [Record func.] Standard / Auto switch card / Record separately / Record to Record function+card/ multiple folder selection [Record/play] [Playback] f / g [Folder] Creating and selecting a folder File numbering Continuous / Auto reset / Manual reset File name Preset code / User setting 1 / User setting 2 Auto rotate…
• Page 354
  Menu Settings 5: Set-up 3 (Yellow) Page Video system NTSC / PAL Power / Remaining capacity / Shutter count / Battery info. Recharge performance / Battery registration / Battery history Auto cleaning: Enable / Disable Sensor cleaning Clean now Clean manually z button display Displays camera settings / Electronic level / options…
• Page 355
  Menu Settings For Movie Shooting z: Shooting 4* (Movie) (Red) Page Live mode / u Live mode / Quick mode AF mode Off / 3×3 l / 6×4 m / 3×3+diag n Grid display 1920×1080 (6 / 5 / 4) (W / X) Movie recording size 1280×720 (8 / 7) (W / X) 640×480 (6 / 5) (X)

• Page 356: System Map

  System Map Macro Ring Lite Macro Twin Lite ST-E2 ST-E3-RT 270EX II 320EX 430EX II 600EX-RT/ MR-14EX MT-24EX 600EX Dioptric Adjustment Lenses Eg Bundled Accessories Anti-Fog Eyepiece Eg Eyecup Eg Wide Strap EW-EOS5DMKIII Angle Finder C Date / time CR1616 Battery Pack Battery Charger lithium battery…

• Page 357
  System Map Remote Remote GPS Receiver Headphones Wireless Timer Remote GP-E2 Controller Switch Controller Controller RC-6 RS-80N3 LC-5 TC-80N3 External microphone EF lenses HDMI Cable HTC-100 (2.9 m/9.5 ft.) Stereo AV Cable AVC-DC400ST (1.3 m/4.3 ft.) TV/Video Wireless File Transmitter WFT-E7 EOS Software Solution Disk…

• Page 358: Troubleshooting Guide

  If the battery’s remaining capacity (p.338) is 94% or higher, the battery  will not be recharged. Do not recharge any battery pack other than genuine Canon Battery Pack LP-E6.  The charger’s lamp blinks at high speed. If there is a problem with the battery charger or battery pack or if …

• Page 359
  Troubleshooting Guide The access lamp still blinks even when the power switch is set to <2>. If the power is turned off while an image is being recorded to the card,  the access lamp will remain on/continue to blink for a few seconds. When the image recording is completed, the power will turn off automatically.
• Page 360
  Troubleshooting Guide Shooting-Related Problems The lens cannot be attached. The camera cannot be used with EF-S lenses (p.39).  The viewfinder is dark. Install a recharged battery pack in the camera (p.28).  No images can be shot or recorded. The card is not properly inserted (p.31).
• Page 361
  Troubleshooting Guide The image is out of focus. Set the lens focus mode switch to <AF> (p.39).  To prevent camera shake, press the shutter button gently (p.43, 44).  If the lens has an Image Stabilizer, set the IS switch to <1> (p.42). …
• Page 362
  Troubleshooting Guide The maximum burst during continuous shooting is lower. If you shoot something that has fine detail (such as a field of grass),  the file size will be larger and the actual maximum burst may be lower than the number mentioned on page 121. ISO 100 cannot be set.
• Page 363
  Make sure the flash (or PC sync cord) is securely attached to the  camera. If you use a non-Canon flash unit with Live View shooting, set [z4:  Silent LV shoot.] to [Disable] (p.206). The flash always fires at full output.
• Page 364
  Troubleshooting Guide or red E During Live View and movie shooting, a white icon is displayed. It indicates that the camera’s internal temperature is high. If the white  < > icon displayed, the still photo’s image quality may deteriorate. If the red <E>…

• Page 365: Movie Shooting

  Troubleshooting Guide The manually set ISO speed changes when switching to movie shooting. If you shoot a movie when [Maximum: 25600] is set with [ISO speed  range] and ISO speed is set to ISO 16000/20000/25600, the ISO speed will switch to ISO12800 (during movie shooting with manual exposure).

• Page 366
  Troubleshooting Guide When I shoot still photos during movie shooting, the movie shooting stops. To shoot still photos during movie shooting, using a CF card  compatible with UDMA transfer rates is recommended. Setting a lower image quality for still photos and shooting fewer …
• Page 367
  Troubleshooting Guide The fourth character in the file name changes. With [51: File name], select the camera’s unique file name or the file  name registered under User setting 1 (p.152). The file numbering does not start from 0001. If the card already contains recorded images, the image number may …
• Page 368
  Troubleshooting Guide [Eye-Fi settings] does not appear. [Eye-Fi settings] will appear only when an Eye-Fi card is inserted into  the camera. If the Eye-Fi card has a write-protect switch set to the LOCK position, you will not be able to check the card’s connection status or disable Eye-Fi card transmission (p.344).
• Page 369
  Troubleshooting Guide No image appears on the TV screen. Use the stereo AV cable that came with the camera (p.271).  Make sure the stereo AV cable or HDMI cable’s plug is inserted all the  way in (p.268, 271). Set the video OUT system (NTSC/PAL) to the same video system as …
• Page 370
  Troubleshooting Guide Sensor Cleaning Problems The shutter makes a noise during sensor cleaning. If you selected [Clean nowf], the shutter will make a noise, but no  picture is taken (p.290). Automatic sensor cleaning does not work. If you repeatedly turn the power switch <1> and <2> at a short …

• Page 371: Error Codes

  50, 60, Operate the power switch, remove and install the battery pack  70, 80, again, or use a Canon lens (p.30, 34). * If the error still persists, write down the error number and contact your nearest Canon Service Center.

• Page 372: Specifications

  SDHC memory card, SDXC memory card Image sensor size: Approx. 36 x 24 mm Compatible lenses: Canon EF lenses (except EF-S lenses) (35 mm-equivalent lens focal length will be as indicated on the lens) Lens mount: Canon EF mount •…

• Page 373
  Specifications Noise reduction: Applicable to long exposures and high ISO speed shots Automatic image brightness correction: Auto Lighting Optimizer Highlight tone priority: Provided Lens aberration correction: Peripheral illumination correction, Chromatic aberration correction • Viewfinder Type: Eye-level pentaprism Coverage: Vertical/Horizontal approx. 100% (with Eye point approx. 21 mm) Magnification: Approx.

• Page 374: Multiple Exposures

  Specifications AF fine adjustment: AF Microadjustment (All lenses by same amount or Adjust by lens) AF-assist beam: Emitted by the EOS-dedicated external Speedlite • Exposure Control Metering modes: 63-zone TTL full-aperture metering Evaluative metering (linked to all AF points) Partial metering (approx. 6.2% of viewfinder at center) Spot metering (approx.

• Page 375
  RAW: Approx. 13 shots (approx. 18 shots) RAW+JPEG Large/Fine: Approx. 7 shots (approx. 7 shots) * Figures are based on Canon’s testing standards (ISO 100 and Standard Picture Style) and a 8 GB card. * Figures in parentheses apply to an UDMA mode 7, 128 GB card based on Canon’s testing standards.
• Page 376
  Specifications • Live View Shooting Aspect ratio settings: 3:2, 4:3, 16:9, 1:1 Focus modes: Live mode, Face detection Live mode (contrast detection), Quick mode (phase-difference detection), Manual focusing (Approx. 5x / 10x magnification possible) Focusing brightness range: EV 1 — 18 (with contrast detection, at 23°C/73°F, ISO 100) Metering modes: Evaluative metering with the image sensor Metering range:…
• Page 377
  Specifications Metering range: EV 0 — 20 (at 23°C/73°F with EF 50mm f/1.4 USM lens, ISO 100) Exposure control: 1. Autoexposure, 2. Shutter-priority AE, 3. Aperture- priority AE, 4. Manual exposure * With 1, 2, and 3, exposure compensation and AE lock are possible (except in Scene Intelligent Auto mode).

• Page 378: Custom Functions

  Specifications Image rotate: Possible Ratings: Provided Movie playback: Enabled (LCD monitor, video/audio OUT, HDMI OUT), built-in speaker Slide show: All images, by date, by folder, movies, stills, or by rating Image protect: Possible Copying images: Possible • Post-Processing of Images In-camera RAW image processing: Brightness correction, White balance, Picture Style, Auto Lighting…

• Page 379
  Specifications Wireless remote control: Remote Controller RC-6 Eye-Fi card: Compatible • Power Battery: Battery Pack LP-E6 (Quantity 1) * AC power can be supplied via AC Adapter Kit ACK-E6. * With Battery Grip BG-E11 attached, size-AA/LR6 batteries can be used. Battery information: Remaining capacity, Shutter count, Recharge performance, and Battery registration possible…
• Page 380
  Specifications • Battery Charger LC-E6 Compatible battery: Battery Pack LP-E6 Recharging time: Approx. 2 hr. 30 min. Rated input: 100 — 240 V AC (50/60 Hz) Rated output: 8.4 V DC / 1.2 A Working temperature range: 5°C — 40°C / 41°F — 104°F Working humidity: 85% or less Dimensions (W x H x D):Approx.
• Page 381
  Specifications All the data above is based on Canon’s testing standards and CIPA (Camera &  Imaging Products Association) testing standards and guidelines. Dimensions, maximum diameter, length and weight listed above are based on  CIPA Guidelines (except weight for camera body only).
• Page 382
  Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non- genuine Canon accessories (e.g., a leakage and/or explosion of a battery…

• Page 383: Safety Warnings

  Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: — Do not use any batteries, power sources, and accessories not specified in this booklet.

• Page 384
  • Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard. If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center.
• Page 385
  Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein)
• Page 386
  4. Do not expose the charger to rain or snow. 5. Use of an attachment not recommended or sold by Canon may result in fire, electric shock, or personal injury. 6. To reduce risk of damage to electric plug and cord, pull by plug rather than by cord when disconnecting charger.

• Page 389: Software Start Guide

  Software Start Guide This chapter gives an overview of the software on the EOS Solution Disk (CD-ROM) provided with the camera and explains how to install the software on a personal computer. It also explains how to view the PDF files on the EOS Software Instruction Manuals Disk (CD-ROM).

• Page 390: Software Start Guide

  Software Start Guide EOS Solution Disk EOS Solution Disk XXX This disk contains various software for EOS cameras. CEL-XXX XXX XXXXX XXXXX XXXXX XXXXX XXXXX Windows XXX XXX Mac OS X XXX XXX a EOS Utility Communication Software for the Camera and Computer You can download images (still photos/movies) you have shot with the …

• Page 391
  Software Start Guide Installing the Software on Windows Compatible OS Windows 7 Windows Vista Windows XP Check that the camera is not connected to your computer. Never connect the camera to your computer before you install the  software. The software will not be installed correctly. Insert the EOS Solution Disk (CD).

• Page 392: Installing The Software On Macintosh

  Insert the EOS Solution Disk (CD). On your computer’s desktop, double-click and open the CD-ROM  icon, and then double-click [Canon EOS Digital Installer]. Select your geographic area, country and language. Click [Easy Installation] to start installation. Follow the on-screen instructions to complete the installation …

• Page 393
  Software Start Guide [WINDOWS] EOS Software Instruction Manuals Disk EOS Software Instruction Manuals Disk XXX Copy the PDF Instruction Manuals contained on the disk to your computer. CEL-XXX XXX XXXXX XXXXX XXXXX XXXXX XXXXX Insert the EOS Software Instruction Manuals Disk (CD) into the CD-ROM drive of your computer.

• Page 394: Index

  Index 10-sec. or 2-sec. delay ….113 ALL-I (I-only) …….. 231 1280×720 ……..231 Ambient light sensor……. 20 1920×1080 ……..231 Aperture-priority AE….164, 220 4- or 9-image index display…249 Area AF frame….23, 72, 77 61-point automatic Aspect ratio ……..204 selection AF ……73, 77 Audio/video OUT….

• Page 395
  Index Camera shake……42, 43 Dial Main Dial ……..45 Card ……..15, 31, 53 Quick Control Dial …… 46 Card reminder……32 Format ……..53 Digital terminal…… 296, 309 Low-level format ……54 Dioptric adjustment……43 Problem ……..33, 54 Direct printing ……. 308 Center-weighted average Direct selection (AF point) ….
• Page 396
  Index First-curtain synchronization..194 Headphones……… 235 Flash (Speedlite) High ISO speed noise reduction .. 143 Custom Functions ….196 High-Definition (HD) ..231, 259, 268 External Speedlite ….188 Highlight alert ……. 247 FE lock ……..188 Highlight detail loss …… 247 Flash control……191 Highlight tone priority ….
• Page 397
  Index Image-recording quality ….119 Live View shooting ….68, 197 Exposure simulation….205 Index display ………249 Face detection Live mode INFO. button ..200, 225, 244, 336 (AF) ………. 208 IPB ……….231 Grid display ……203 ISO speed …..124, 221, 224 Information display….
• Page 398
  High ISO speed ……. 143 AE lock ……..222 Long exposures ……. 144 AF mode……230, 239 Nomenclature……… 18 Aperture-priority AE….220 Non-Canon flash units….189 Autoexposure shooting…..218 Normal (Image-recording quality) ..119 Compression method ….231 Drop frame …….238 NTSC ……..231, 354 Edit ………..263…
• Page 399
  Index Power Registering and using an Auto power off ……55 AF point ……..324 Battery check……35, 338 Release shutter without card..32 Battery info …….338 Remote control shooting ….186 Household power……342 Remote switch shooting ….185 Possible shots ….35, 121, 199 Resize ……….
• Page 400
  Index Silent shooting Continuous shooting….112 Video system….231, 271, 354 Silent LV shooting…..206, 240 View on TV ……259, 268 Single shooting……112 Viewfinder ……..23 Single image display…..244 Dioptric adjustment ….43 Single shooting ……112 Electronic level….59, 329 Single-point AF ……72, 75 Grid display……..
• Page 404
  CANON EUROPA N.V. PO Box 2262, 1180 EG Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. This Instruction Manual booklet is current as of April 2012. For information on the camera’s compatibility with any accessories and lenses introduced after this date,…

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(408 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(183 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(121 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(23 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(405 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(408 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(408 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(408 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(408 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(404 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(406 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(152 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(112 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(29 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(100 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(149 страниц)

Canon EOS 5D Mark III инструкция по эксплуатации
(151 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(151 страница)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)

Canon EOS 5D Mark III инструкция по эксплуатации
(22 страницы)