В настоящее время вы находитесь на странице с руководствами HiWatch камера видеонаблюдения. Выберите один из продуктов, чтобы сразу перейти к руководству по этому продукту. Не можете найти HiWatch ? Тогда попробуйте вбить в поле поиска HiWatch и модель, чтобы найти нужное руководство HiWatch. На ManualsPDF.ru в настоящее время имеется 89 руководств HiWatch . Самые популярные HiWatch камера видеонаблюдения:
- HiWatch DS-I253M(B)
- HiWatch DS-I202(D)
- HiWatch DS-I453M
Последнее добавленное руководство HiWatch было добавлено 2023-07-25, и это HiWatch DS-I203(E).
- Manuals
- Brands
- HIKVISION Manuals
- DVR
- HiWatch Series
- User manual
-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
Digital Video Recorder
User Manual
Related Manuals for HIKVISION HiWatch Series
Summary of Contents for HIKVISION HiWatch Series
-
Page 1: Digital Video Recorder
Digital Video Recorder User Manual…
-
Page 2
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. -
Page 3: Regulatory Information
Digital Video Recorder User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
-
Page 4: Safety Instructions
Digital Video Recorder User Manual Applicable Models This manual is applicable for the following products: HWD-XXXX, HWD-XXXXY, HWD-XXXX-Y, HWD-XXXXY-Y, HWD-XXXXY-YX, HWD-XXXXYY-YX (X = 0, 1, 2, 3, 4, 5, 6, 7, 8, 9; Y = A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z) Symbol Conventions The symbols that may be found in this document are defined as follows.
-
Page 5
Digital Video Recorder User Manual Unit is designed for indoor use only. Keep all liquids away from the video recorder. Ensure environmental conditions meet factory specifications. Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit. -
Page 6: Table Of Contents
Digital Video Recorder User Manual Table of Contents Chapter 1 Start up ……………………..9 1.1 Activate Your Device ………………….9 1.2 Login ……………………..10 1.2.1 Configure Unlock Pattern ………………10 1.2.2 Log in via Unlock Pattern ………………10 1.2.3 Log in via Password ………………..11 Chapter 2 Live View ………………………
-
Page 7
Digital Video Recorder User Manual 5.3.1 Analog Camera ………………….35 5.3.2 Network Camera ………………… 35 5.3.3 OSD Settings ………………….38 5.3.4 Smart Event ………………….39 5.4 Recording Management ………………..43 5.4.1 Storage Device ………………….43 5.4.2 Configure Recording Schedule …………….44 5.4.3 Configure Recording Parameter ……………. -
Page 8
Digital Video Recorder User Manual Chapter 7 Maintenance ……………………89 7.1 Restore Default ……………………. 89 7.2 Search Log ……………………89 7.3 Upgrade ……………………..89 7.3.1 Local Upgrade ………………….89 7.3.2 Online Upgrade ………………….. 90 Chapter 8 Alarm ……………………..91 8.1 Set Event Hint ……………………91 8.2 View Alarm in Alarm Center ……………….. -
Page 9: Chapter 1 Start Up
Digital Video Recorder User Manual Chapter 1 Start up 1.1 Activate Your Device Purpose For the first-time access, you need to activate the video recorder by setting an admin password. No operation is allowed before activation. You can also activate the video recorder via web browser, SADP or client software.
-
Page 10: Login
Digital Video Recorder User Manual Figure 1-1 Activation 1.2 Login 1.2.1 Configure Unlock Pattern Purpose After the device is activated, you can configure the device unlock pattern. Step 1 Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the pattern is done.
-
Page 11: Log In Via Password
Digital Video Recorder User Manual Figure 1-2 Draw the Unlock Pattern Step 2 Draw the pre-defined pattern to unlock to enter the menu operation. If you have forgotten your pattern, you click Forgot My Pattern or Switch User to log in via password.
-
Page 12
Digital Video Recorder User Manual Figure 1-3 Login Interface Step 2 Input password. Step 3 Click Login. When you forget the password of the admin, you can click Forgot Password to reset the password. In the Login dialog box, if you enter the wrong password 7 times, the current user account will be locked for 60 seconds. -
Page 13: Chapter 2 Live View
Digital Video Recorder User Manual Chapter 2 Live View 2.1 GUI Introduction Click to start/stop auto-switch. The screen will automatically switch to the next one. Click to start/stop all-day recording. Right click a camera or click to enter full screen mode. …
-
Page 14: Ptz Control
Digital Video Recorder User Manual Table 2-2 Live View Icon Description Icons Description Alarming (normal event and smart event) Recording. 2.2 PTZ Control 2.2.1 Configure PTZ Parameter Purpose Follow the procedure to set the parameters for PTZ. You should configure the PTZ parameters before controlling the PTZ camera.
-
Page 15
Digital Video Recorder User Manual Figure 2-2 PTZ Settings Step 2 Click PTZ Parameter Settings. -
Page 16: Ptz Control Panel Introduction
Digital Video Recorder User Manual Figure 2-3 PTZ Parameter Step 3 Select the parameters of the PTZ camera from the drop-down list. All the parameters should be exactly the same as the PTZ camera parameters. For the Coaxitron camera/dome connected, you can select the PTZ protocol to UTC (Coaxitron).
-
Page 17: Customize Preset
Digital Video Recorder User Manual Focus-/+ Iris-/+ 2.2.3 Customize Preset Purpose Follow the steps to set the preset location which you want the PTZ camera to point to when an event takes place. Step 1 Preview a camera in live view and click on shortcut menu.
-
Page 18: Customize Pattern
Digital Video Recorder User Manual Figure 2-4 Patrol Settings Step 6 Click Apply. What to do next: Select a patrol and click Call to call it. Calling a patrol makes the PTZ to move according the predefined patrol path. Figure 2-5 Call Preset 2.2.5 Customize Pattern Purpose Patterns can be set by recording the movement of the PTZ.
-
Page 19
Digital Video Recorder User Manual Select a pattern and click Call to call it. Calling a patrol to move the PTZ camera according to the predefined patterns. Figure 2-6 Call Pattern… -
Page 20: Chapter 3 Playback
Digital Video Recorder User Manual Chapter 3 Playback 3.1 GUI Introduction Go to Playback. Figure 3-1 Playback Table 3-1 Playback Interface Description Button Operation Button Operation Switch playback stream Clip video 30s reverse 30s forward Reverse playback Start playback Speed down Speed up Speed Full screen…
-
Page 21: Normal Playback
Digital Video Recorder User Manual Figure 3-2 Timeline Position the cursor on the timeline, drag the timeline to position to a certain time. Period marked with blue bar contains video. Red bar indicates the video in the period is event video.
-
Page 22: Smart Playback
Digital Video Recorder User Manual Table 3-2 Button Description Button Detection Button Detection Zoom in/out playback Add tag image Turn on/off audio Lock/unlock video 3.3 Smart Playback Purpose The smart playback function provides an easy way to get through the less effective information. When you select the smart playback mode, the system will analyze the video containing the motion detection, line crossing detection, or intrusion detection information.
-
Page 23
Digital Video Recorder User Manual Step 4 Position the cursor on playback window to show control bar. Figure 3-6 Control Bar Table 3-3 Button Description Button Detection Button Detection Zoom in/out playback Add tag image Turn on/off audio Lock/unlock video Draw detection area for Configure detection area motion detection… -
Page 24: Sub-Periods Playback
Digital Video Recorder User Manual Figure 3-7 Play Strategy Step 7 Click to search and play the matched videos. 3.4 Sub-Periods Playback Purpose The videos can be played in multiple sub-periods simultaneously. Step 1 Go to Playback. Step 2 Click Sub-periods. Step 3 Select a camera.
-
Page 25
Digital Video Recorder User Manual Step 1 Start playback. For detailed steps, refer to 3.2 Normal Playback. Step 2 Click Step 3 Clip the videos. Choose from: Click , set Start Time and End time, click OK. Drag the clip start time and end time sliders in playback time bar. Figure 3-8 Start Time/End Time Slider Step 4 Click Step 5 Click Export to export the clip to backup device. -
Page 26: Chapter 4 File Search
Digital Video Recorder User Manual Chapter 4 File Search 4.1 Search File Step 1 Go to Search. Step 2 Set search conditions. Step 3 Click Search. Related Operations: Click to play the video. Click to lock the file. Locked file will not be overwritten. …
-
Page 27: Chapter 5 Configuration (Easy Mode)
Digital Video Recorder User Manual Chapter 5 Configuration (Easy Mode) Purpose Easy mode contains basic configurations. Go to Configuration and click Easy Mode. 5.1 System Configuration 5.1.1 General Purpose You can configure the output resolution, system time, mouse pointer speed, etc. Step 1 Go to Configuration >…
-
Page 28
Digital Video Recorder User Manual Step 1 Go to Configuration > User. Step 2 Click Add. Figure 5-2 Add User Step 3 Enter user information. Password and Confirm: Enter the same password in Password and Confirm text fields. STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. -
Page 29: Exception
Digital Video Recorder User Manual Set Password Resetting Email Purpose When you forgot your login pattern and password, the device will send an email contains verification code to your email for password resetting. Step 1 Go to Configuration > User. Step 2 Click Password Resetting Email.
-
Page 30: Network Configuration
Digital Video Recorder User Manual Step 3 Select Exception Type to set its linkage actions. Figure 5-4 Exceptions Step 4 Set Normal Linkage and Trigger Alarm Output as your desire. Step 5 Click Apply. 5.2 Network Configuration 5.2.1 General Purpose Network settings must be properly configured before you operate the video recorder over network.
-
Page 31: Hik-Connect
Digital Video Recorder User Manual Figure 5-5 Network Step 2 Configure network parameters. DHCP: If the DHCP server is available, you can check Enable DHCP to automatically obtain an IP address and other network settings from that server. Obtain DNS Automatically: If DHCP is checked. You can check Obtain DNS Automatically to automatically obtain Preferred DNS Server and Alternate DNS Server.
-
Page 32
Digital Video Recorder User Manual Figure 5-6 Service Terms 1) Check The Hik-Connect service will require internet access. Please read Service Terms and Privacy Statement before enabling the service. 2) Scan the QR code to read the service terms and privacy statement. 3) Click OK. -
Page 33: Email
Digital Video Recorder User Manual Figure 5-7 Hik-Connect Step 6 After configuration, you can access your video recorder in your mobile phone. 1) Scan the first QR code to download the Hik-Connect application. 2) Open Hik-Connect and scan the second QR code to add your video recorder. For detailed steps of adding the video recorder to Hik-Connect and more operation instructions, refer to Hik-Connect Mobile Client User Manual.
-
Page 34
Digital Video Recorder User Manual Figure 5-8 Email Step 2 Configure the following email settings: Server Authentication: (Optional), check it to enable the server authentication feature. User Name: The user account of sender’s email for SMTP server authentication. … -
Page 35: Camera Management
Digital Video Recorder User Manual Step 3 Click Apply. 5.3 Camera Management 5.3.1 Analog Camera Purpose You should configure the analog and IP signal input types. Step 1 Go to Configuration > Camera > Analog. Step 2 Select signal input type as HD/CVBS or IP. …
-
Page 36
Digital Video Recorder User Manual Step 1 Go to Configuration > Camera > IP Camera. The Security column shows whether the network camera is activated. Figure 5-10 Network Camera List Step 2 Click Inactive of the desired camera. Figure 5-11 Activation Step 3 Choose one of the following methods to set camera password. -
Page 37
Digital Video Recorder User Manual Add Automatically Searched Online Network Camera Purpose Add the network cameras with the same password of your video recorder to your video recorder. Before you start Ensure your network camera should be in the same network segment with your video recorder. -
Page 38: Osd Settings
Digital Video Recorder User Manual Figure 5-13 Add IP Camera Step 3 Enter information of the network camera to add. Use Channel Default Password: If it is checked, the video recorder will add the camera by the set channel default password. Step 4 Click Add.
-
Page 39: Smart Event
Digital Video Recorder User Manual Step 1 Go to Configuration > Camera > OSD. Step 2 Select Camera. Step 3 Configure parameters as your desire. Figure 5-14 OSD Step 4 Drag the text frames on the preview window to adjust the OSD position. Step 5 Click Apply.
-
Page 40
Digital Video Recorder User Manual Figure 5-15 Motion Detection Step 2 Select Camera to configure the motion detection. Step 3 Check Enable. Step 4 Set the motion detection area. Choose from: Full screen: Click Full Screen to set the motion detection area as full screen. … -
Page 41
Digital Video Recorder User Manual Step 4 Set the detection rules and detection areas. 1) Select Arming Area. Up to 4 arming areas are selectable. 1) Set Sensitivity. Sensitivity: The size of the object that can trigger the alarm. The higher the value is, the more easily the detection alarm will be triggered. -
Page 42
Digital Video Recorder User Manual Step 2 Choose one day of a week and set the time segment. Up to eight time periods can be set within each day. Time periods shall not be repeated or overlapped. Figure 5-16 Set Arming Schedule Step 3 Click Apply. -
Page 43: Recording Management
Digital Video Recorder User Manual Step 3 Click Apply. 5.4 Recording Management 5.4.1 Storage Device Initialize HDD Purpose A newly installed hard disk drive (HDD) must be initialized before it can be used to save videos and information. Before you start Install at least an HDD to your video recorder.
-
Page 44: Configure Recording Schedule
Digital Video Recorder User Manual Figure 5-18 Add NetHDD Step 7 Select NAS disk from the list, or manually enter the directory in NetHDD Directory. Step 8 Click OK. Result: The added NetHDD will be displayed in the storage device list. 5.4.2 Configure Recording Schedule Purpose Video recorder will automatically start/stop recording according to the configured schedule.
-
Page 45
Digital Video Recorder User Manual Step 2 Configure the event detection and select the channels to trigger the recording when an event occurs. For detailed steps, refer to 5.3.4 Smart Event. Step 3 Go to Configuration > Record > Parameter. Step 4 Set the continuous main stream/sub-stream recording parameters for the camera. -
Page 46: Configure Recording Parameter
Digital Video Recorder User Manual 6) To set other schedules, uncheck All Day and set Start/End time and schedule Type. Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other. 7) Click OK to save the settings and go back to upper level menu.
-
Page 47
Digital Video Recorder User Manual Sub-stream is a second codec that runs alongside the mainstream. It allows you to reduce the outgoing internet bandwidth without sacrificing your direct recording quality. Sub-stream is often exclusively used by smartphone applications to view live video. Users with limited internet speeds may benefit most from this setting. -
Page 48: Chapter 6 Configuration (Expert Mode)
Digital Video Recorder User Manual Chapter 6 Configuration (Expert Mode) Go to Configuration and click Expert Mode. 6.1 System Configuration 6.1.1 General Purpose You can configure the output resolution, system time, mouse pointer speed, etc. Step 1 Go to Configuration > System > General. Figure 6-1 General Settings Step 2 Configure the parameters as your desire.
-
Page 49: Live View
Digital Video Recorder User Manual Enable Wizard: The wizard pops up after the device starts up. Enable Password: You need to enter password for authentication if the device automatically logged out. Menu Output Mode: Choose output to display local menu. …
-
Page 50
Digital Video Recorder User Manual Full Screen Monitoring Dwell Time: Set the time to show alarm event image. Enable Audio Output: Turn on/off audio output for the selected video output. Volume: Adjust the live view, playback, and two-way audio volume for the selected video output interface. -
Page 51: User
Digital Video Recorder User Manual Step 5 Configure Frame Rate, Max. Bitrate Mode, and Max. Bitrate. The higher frame rate and bitrate settings result in higher bandwidth requirement. Step 6 Click Apply. 6.1.3 User Purpose There is a default account: Administrator. The Administrator user name is admin. The Administrator has the permission to add and delete user and configure user parameters.
-
Page 52: Network Configuration
Digital Video Recorder User Manual STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
-
Page 53: Hik-Connect
Digital Video Recorder User Manual Step 3 Click Apply. 6.2.2 Hik-Connect Purpose Hik-Connect provides the mobile phone application and the service platform webpage (www.hik-connect.com) to access and manage your video recorder. It enables you to get a convenient remote access to the surveillance system. Step 1 Go to Menu >…
-
Page 54: Advanced Settings
Digital Video Recorder User Manual Figure 6-6 Hik-Connect Step 6 After configuration, you can access your video recorder in your mobile phone. 3) Scan the first QR code to download the Hik-Connect application. 4) Open Hik-Connect and scan the second QR code to add your video recorder. For detailed steps of adding the video recorder to Hik-Connect and more operation instructions, refer to Hik-Connect Mobile Client User Manual.
-
Page 55: Camera Management
Digital Video Recorder User Manual HTTP Authentication: If you need to enable the HTTP service, you can set the HTTP authentication to enhance the access security. Two authentication types are selectable, for security reasons, it is recommended to select digest as the authentication type. …
-
Page 56
Digital Video Recorder User Manual Before you start Ensure your network camera should be in the same network segment with your video recorder. Step 1 Go to Configuration > Camera > Camera > IP Camera. Step 2 Click Online Device. The online cameras in the same network segment with your video recorder will be displayed in the camera list. -
Page 57
Digital Video Recorder User Manual STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. -
Page 58
Digital Video Recorder User Manual Add Network Camera Manually Purpose Add the network cameras to your video recorder. Before you start Ensure your network camera should be in the same network segment with your video recorder. Ensure the network connection is valid and correct. For detailed steps of configuring network, refer to 6.2.1 General. -
Page 59
Digital Video Recorder User Manual Edit Connected Network Camera Purpose You can edit the IP address, protocol and other parameters of the added network cameras. Step 1 Go to Configuration > Camera > IP Camera. Step 2 Click of an added network camera. Channel Port: If the connected device is an encoding device with multiple channels, you can choose the channel to connect by selecting the channel port No. -
Page 60: Display Settings
Digital Video Recorder User Manual 6.3.3 Display Settings Purpose Configure the OSD (On-Screen Display), image settings, exposure settings, day/night switch settings, etc. Step 1 Go to Configuration > Camera > Display. Step 2 Select Camera. Step 3 Configure parameters as your desire. …
-
Page 61: Privacy Mask
Digital Video Recorder User Manual 6.3.4 Privacy Mask Purpose You are allowed to configure the privacy mask areas that cannot be viewed or recorded. Step 1 Go to Configuration > Camera > Privacy Mask. Step 2 Select Camera. Step 3 Check Enable. Figure 6-12 Privacy Mask Step 4 Drag to draw an area on the window.
-
Page 62
Digital Video Recorder User Manual Step 1 Go to Configuration > Event > Normal Event > Motion Detection. Figure 6-13 Motion Detection Step 2 Select Camera to configure. Step 3 Check Enable. Step 4 Set the motion detection area. Choose from: … -
Page 63: Video Loss
Digital Video Recorder User Manual Video Tampering Purpose Trigger alarm when the lens is covered and take alarm response actions. Step 1 Go to Configuration > Event > Normal Event > Video Tampering Detection. Figure 6-14 Video Tampering Step 2 Select Camera. Step 3 Check Enable.
-
Page 64: Alarm Input
Digital Video Recorder User Manual Step 5 Set the linkage actions. Refer to 6.4.4 Configure Alarm Linkage Action. Step 6 Click Apply. Alarm Input Purpose Set linkage actions for an external sensor alarm. Step 1 Go to Configuration > Event > Normal Event > Alarm Input. Figure 6-15 Alarm Input …
-
Page 65: Alarm Output
Digital Video Recorder User Manual Figure 6-16 Edit Alarm Input Step 3 Customize Alarm Name. Step 4 Select alarm Type as N.O (normally open) or N.C (normally closed). Step 5 Select Settings as Input to enable the function. Step 6 Set the arming schedule. Refer to 6.4.3 Configure Arming Schedule. Step 7 Set the linkage actions.
-
Page 66
Digital Video Recorder User Manual Step 4 Select Dwell Time. Figure 6-17 Alarm Output Step 5 Set the arming schedule. Refer to 6.4.3 Configure Arming Schedule. Step 6 Click Apply. Exception Purpose Exception events can be configured to take the event hint in the live view window and trigger alarm outputs and linkage actions. -
Page 67: Smart Event
Digital Video Recorder User Manual Step 3 Select Exception Type to set its linkage actions. Figure 6-18 Exceptions Step 4 Set the arming schedule. Refer to 6.4.3 Configure Arming Schedule. Step 5 Click Apply. 6.4.2 Smart Event Face Detection Purpose Face detection function detects the face appears in the surveillance scene, and some certain actions can be taken when the alarm is triggered.
-
Page 68
Digital Video Recorder User Manual Step 2 Select Camera to configure. Step 3 Optionally, check Save VCA Picture to save the captured pictures of VCA detection. Step 4 Check Enable Face Detection. Step 5 Adjust Sensitivity. Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be detected. -
Page 69
Digital Video Recorder User Manual Line crossing detection detects people, vehicles, and objects crossing a set virtual line. The detection direction can be set as bidirectional, from left to right or from right to left. Step 1 Go to Configuration > Event > Smart Event > Line Crossing. Step 2 Select Camera to configure. -
Page 70
Digital Video Recorder User Manual 3) Adjust Sensitivity. Sensitivity: Range [0-100]. The higher the value is, the more easily the detection alarm can be triggered. Step 6 Set the arming schedule. Refer to 6.4.3 Configure Arming Schedule. Step 7 Set the linkage actions. Refer to 6.4.4 Configure Alarm Linkage Action. Step 8 Click Apply. -
Page 71
Digital Video Recorder User Manual Step 5 Set the detection rules and detection areas. 1) Select Arming Area. Up to 4 arming areas are selectable. 2) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of the detection region. -
Page 72
Digital Video Recorder User Manual Fast moving detection alarm is triggered when people, vehicle or other objects move fast in a pre-defined virtual region, and a series of actions can be taken when the alarm is triggered. Step 1 Go to Configuration > Event > Smart Event > Fast Moving. Step 2 Select Camera to configure. -
Page 73
Digital Video Recorder User Manual Step 7 Set the linkage actions. Refer to 6.4.4 Configure Alarm Linkage Action. Step 8 Click Apply. Unattended Baggage Detection Purpose Unattended baggage detection function detects the objects left over in the pre-defined region such as the baggage, purse, dangerous materials, etc., and a series of actions can be taken when the alarm is triggered. -
Page 74
Digital Video Recorder User Manual 1) Select Arming Area. Up to 4 arming areas are selectable. 2) Set Sensitivity and Time Threshold. Time Threshold range: [5s-3600s]. It defines the time of the objects removed from the region. If you set the value as 10, alarm is triggered after the object disappears from the region for 10s. -
Page 75
Digital Video Recorder User Manual Defocus Purpose The image blur caused by defocus of the lens can be detected, and some certain actions can be taken when the alarm is triggered. Step 1 Go to Configuration > Event > Smart Event > Defocus. Figure 6-20 Defocus Detection Step 2 Select Camera to configure. -
Page 76: Configure Arming Schedule
Digital Video Recorder User Manual Step 3 Optionally, check Save VCA Picture to save the captured pictures of VCA detection. Step 4 Check Enable. Step 5 Adjust Sensitivity. The Sensitivity in the Rule Settings ranges from 1 to 100, and the higher the value is, the more easily the change of scene can trigger the alarm.
-
Page 77
Digital Video Recorder User Manual Alarm linkage actions will be activated when an alarm or exception occurs. Step 1 Click Linkage Action. Figure 6-22 Linkage Actions Step 2 Select the normal linkage actions, trigger alarm output, or trigger recording channel. For details, refer to Configure Full Screen Monitoring, Configure Audio Warning, Notify Surveillance Center, Configure Email Linkage, Trigger Alarm Output, Configure PTZ Linkage. -
Page 78
Digital Video Recorder User Manual Configure Audio Warning Purpose The audio warning enables the video recorder to trigger an audible beep when an alarm is detected. Step 1 Go to Configuration > System > Live View > General. Step 2 Enable Audio Output and set Volume. Step 3 Go to Linkage Action interface of the alarm detection. -
Page 79
Digital Video Recorder User Manual Step 1 Go to Linkage Action interface of the alarm input or event detection. Step 2 Click Trigger Alarm Output. Step 3 Select the alarm outputs to trigger. Step 4 Go to Configuration > System > Event > Normal Event > Alarm Output. Step 5 Select an alarm output item from the list. -
Page 80: Recording Management
Digital Video Recorder User Manual 6.5 Recording Management 6.5.1 Configure Recording Schedule Purpose Video recorder will automatically start/stop recording according to the configured schedule. Configure Continuous Recording Step 1 Go to Configuration > Record > Parameter. Step 2 Set the continuous main stream/sub-stream recording parameters for the camera. For detailed steps, refer to 6.5.2 Configure Recording Parameter.
-
Page 81
Digital Video Recorder User Manual Figure 6-24 Recording Schedule Continuous: Continuous recording. Event: Recording triggered by all event triggered alarm. Step 2 Select a camera in Camera No. Step 3 Check Enable. Step 4 Configure the recording schedule. Choose from: … -
Page 82: Configure Recording Parameter
Digital Video Recorder User Manual Figure 6-25 Edit Schedule Draw Schedule 1) Click to select schedule type as Continuous or Event. Figure 6-26 Schedule Type 2) On the table, drag the mouse on the desired period to draw a colored bar. Step 5 Click Apply.
-
Page 83: Storage Device
Digital Video Recorder User Manual Step 2 Configure recording parameters. Frame Rate: Frame rate refers to how many frames are captured each second. A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.
-
Page 84: Configure Storage Mode
Digital Video Recorder User Manual Figure 6-27 Add NetHDD Step 7 Select NAS disk from the list, or manually enter the directory in NetHDD Directory. Step 8 Click OK. Result: The added NetHDD will be displayed in the storage device list. 6.5.4 Configure Storage Mode Configure HDD Groups Purpose…
-
Page 85
Digital Video Recorder User Manual Figure 6-28 Group Step 5 Click Apply. Step 6 Reboot the video recorder to activate the new storage mode settings. Step 7 After reboot, go to Configuration > Record > Storage. Step 8 Click of desired HDD to set the group. Step 9 Select Group number for the current HDD. -
Page 86: Advanced Settings
Digital Video Recorder User Manual Figure 6-29 Quota Step 5 Click Apply. Step 6 Reboot the video recorder to activate the new settings. 6.5.5 Advanced Settings Step 1 Go to Configuration > Record > Advanced Settings. Step 2 Configure the parameters as your desire. …
-
Page 87: Settings
Digital Video Recorder User Manual Figure 6-30 Cloud Storage Step 4 Scan the QR code to log into the selected cloud to get the authentication code and enter Authentication Code. Step 5 Click Apply. Step 6 About 20 seconds later, cloud storage status will be Online. Step 7 Configure the event recording schedule.
-
Page 88
Digital Video Recorder User Manual Figure 6-31 RS-232 Step 2 Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control and usage. Console: Connect a computer to the video recorder through the computer serial port. Video recorder parameters can be configured by using software such as HyperTerminal. -
Page 89: Chapter 7 Maintenance
Digital Video Recorder User Manual Chapter 7 Maintenance 7.1 Restore Default Step 1 Go to Maintenance. Step 2 Select restoring type. Simple Restore: Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings.
-
Page 90: Online Upgrade
Digital Video Recorder User Manual Step 3 Select backup Device. Step 4 Select upgrade file and click Upgrade. After the upgrade, reboot your video recorder to activate the new firmware. 7.3.2 Online Upgrade Purpose We will upload latest upgrade file to Hik-Connect platform, you can upgrade video recorder with latest online upgrade file.
-
Page 91: Chapter 8 Alarm
Digital Video Recorder User Manual Chapter 8 Alarm Purpose When events occur, you can view their details in alarm center. 8.1 Set Event Hint Purpose Select the events to hint in alarm center. Step 1 Click in the upper-right corner of local menu to enter alarm center. Step 2 Select Exception, Basic Event, or Smart Event to configure as your desire.
-
Page 92: View Alarm In Alarm Center
Digital Video Recorder User Manual 8.2 View Alarm in Alarm Center Step 1 Click in upper-right corner of local menu. Step 2 Select Exception, Basic Event, or Smart Event to view as your desire…
-
Page 93: Chapter 9 Web Operation
Digital Video Recorder User Manual Chapter 9 Web Operation 9.1 Introduction Purpose You can get access to the video recorder via web browser. You may use one of the following listed web browsers: Internet Explorer 6.0 to 11.0, Apple Safari, Mozilla Firefox, and Google Chrome.
-
Page 94: Live View
Digital Video Recorder User Manual 9.3 Live View After login, live view interface shows. Figure 9-2 Live View For saving path of captured pictures and clipped videos, refer to 9.5 Configuration. 9.4 Playback Click Playback to enter playback interface. Figure 9-3 Playback For saving path of captured pictures and clipped videos, refer to 9.5 Configuration.
-
Page 95: Configuration
Digital Video Recorder User Manual 9.5 Configuration Click Configuration to enter configuration interface. Figure 9-4 Configuration 9.6 Log Step 1 Go to Maintenance > System > Maintenance > Log. Step 2 Set the search conditions. Step 3 Click Search. Figure 9-5 Log…
-
Page 96: Chapter 10 Appendix
Digital Video Recorder User Manual Chapter 10 Appendix 10.1 Glossary • Dual-Stream: Dual-stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the DVR, with the main stream having a maximum resolution of 1080P and the sub-stream having a maximum resolution of CIF.
-
Page 97: Troubleshooting
Digital Video Recorder User Manual • PTZ: Acronym for Pan, Tilt, Zoom. PTZ cameras are motor driven systems that allow the camera to pan left and right, tilt up and down and zoom in and out. • USB: Acronym for Universal Serial Bus. USB is a plug-and-play serial bus standard to interface devices to a host computer.
-
Page 98
Digital Video Recorder User Manual 1) Select “Menu>HDD>General”. 2) If the status of the HDD is “Uninitialized”, please check the checkbox of corresponding HDD and click Init. Step 3 Verify the HDD is detected or is in good condition. 1) Select “Menu>HDD>General”. 2) If the HDD is not detected or the status is “Abnormal”, please replace the dedicated HDD according to the requirement. -
Page 99
Digital Video Recorder User Manual Possible Reasons: — The frame rate is not the real-time frame rate. — The DVR supports up to 16-channel synchronize playback at the resolution of 4CIF, if you want a 16-channel synchronize playback at the resolution of 720p, the frame extracting may occur, which leads to a slight stuck. -
Page 100
Digital Video Recorder User Manual UD14167B…
Каталог
- Оборудование HiWatch
- IP видеорегистраторы
- IP камеры
- IP поворотные камеры
- HD-TVI камеры
- HD-TVI видеорегистраторы
- HD-TVI поворотные камеры
- Домофоны
- Передача данных
- Мониторы
- Оборудование NOVIcam
- Оборудование Эридан
- EX извещатели
- Приборы и устройства
- EX оповещатели
- EX термокожухи
- EX коробки
- Оборудование SLT
- Аварийные светильники SLT
- Световое табло ТОПАЗ
- Оборудование ComOnyX
- AHD купольные видеокамеры
- AHD поворотные видеокамеры
- AHD уличные видеокамеры
- AHD видеорегистраторы
- IP купольные видеокамеры
- IP уличные видеокамеры
- IP поворотные видеокамеры
- IP видеорегистраторы
- CCTV уличные PTZ видеокамеры
- Дополнительное оборудование
- AHD миниатюрные видеокамеры
- AHD купольные видеокамеры
- Оборудование Alerto
- Микшеры-усилители Alerto серия LIGHT
- Микшеры-усилители Alerto серия Pro
- Автоматическая система оповещения Alerto
- Громкоговорители уличные Alerto
- Громкоговорители внутренние Alerto
- Акустический кабель Alerto
- Микрофонные панели Alerto
- Оборудование Major
- AHD Мониторы
- AHD Вызывные панели
- Домофонные системы
- Мониторы Major
- Мониторы Pilot
- Вызывные панели
- Аксессуары
- Оборудование CTV
- Мобильные домофоны
- Вызывные панели
- Мониторы видеодомофонов
- Комплекты видеодомофонов
- Замки
- Аксессуары домофонов
- AHD видеокамеры
- IP видеокамеры
- AHD видеорегистраторы
- IP видеорегистраторы
- Видеомониторы
- Оборудование CARDDEX
- Оборудование MKV Pro
- Металлодетекторы Блокпост
- Подключение видеодомофонов Optimus к домофонам в многоквартирных домах
Видеомофоны Optimus могут быть подключены к сети общедомового домофона, что позволяет принимать от него вызовы, управлять открытием подъездной двери и производить видеонаблюдения перед подъездной дверью….
- Стартует специальная акция для проектов с IP-камерами Axis
Стартует специальная акция для проектов с IP-камерами Axis. С 1 августа по 30 октября 2015 г. вы можете приобрести монобрендовую версию ПО Macroscop, поддерживающего только камеры Axis, и сэкономить 45% от стоимости.
- Видеонаблюдение придомовой территории на базе оборудования TFortis
Какие технические сложности могут возникнуть при монтаже системы видеонаблюдения в частном доме и как их решить с помощью оборудования TFortis?
Документация HiWatch
| Документ | Размер |
|---|---|
| Паспорт HD-TVI видеорегистратора модели DS-H116U | 310 КБ |
| Паспорт HD-TVI видеорегистратора модели DS-H108U | 315 КБ |
| Паспорт HD-TVI видеорегистратора модели DS-H104U | 309 КБ |
| Каталог HiWatch | 1,7 МБ |
| Паспорт IP камеры модели DS-N241W | 341 КБ |
| Паспорт IP камеры модели DS-N211 | 596 КБ |
| Паспорт IP камеры модели DS-N201 | 641 КБ |
| Паспорт IP видеорегистратора модели DS-N108P | 350 КБ |
| Паспорт IP видеорегистратора модели DS-N108 | 357 КБ |
| Паспорт IP видеорегистратора модели DS-N104 | 357 КБ |
| Паспорт HD-TVI камеры модели DS-T227 | 589 КБ |
| Паспорт HD-TVI камеры модели DS-T226 | 637 КБ |
| Паспорт HD-TVI камеры модели DS-T203 | 670 КБ |
| Паспорт HD-TVI камеры модели DS-T201 | 604 КБ |
| Паспорт HD-TVI камеры модели DS-T200 | 654 КБ |
| Паспорт HD-TVI камеры модели DS-T119 | 669 КБ |
| Паспорт HD-TVI камеры модели DS-T116 | 632 КБ |
| Паспорт HD-TVI камеры модели DS-T103 | 669 КБ |
| Паспорт HD-TVI камеры модели DS-T101 | 603 КБ |
| Паспорт HD-TVI камеры модели DS-T100 | 652 КБ |
| Паспорт HD-TVI видеорегистратора модели DS-H116G | 325 КБ |
| Паспорт HD-TVI видеорегистратора модели DS-H108Q | 354 КБ |
| Паспорт HD-TVI видеорегистратора модели DS-H108G | 348 КБ |
| Паспорт HD-TVI видеорегистратора модели DS-H104Q | 354 КБ |
| Паспорт HD-TVI видеорегистратора модели DS-H104G | 348 КБ |
| Руководство IP камеры модели DS-N241 | 1,4 МБ |
| Руководство IP камеры модели DS-N211 | 1,6 МБ |
| Руководство IP камеры модели DS-N201 | 1,4 МБ |
| Руководство IP видеорегистраторов моделей DS-N104, DS-N108, DS-N108P | 2,2 МБ |
| Руководство HD-TVI камеры модели DS-T227 | 15,4 МБ |
| Руководство HD-TVI камеры моделей DS-T200, DS-T203 | 3,1 МБ |
| Руководство HD-TVI камеры моделей DS-T119, DS-T116, DS-T226 | 3,1 МБ |
| Руководство HD-TVI камеры моделей DS-T101 и DS-T201 | 1,6 МБ |
| Руководство HD-TVI камеры моделей DS-T100_DS-T103 | 3,1 МБ |
| Руководство HD-TVI видеорегистраторов моделей DS-H1ххG_DS-H1ххQ | 2 МБ |
Hiwatch — это бренд, под которым компания Hikvision выпускает оборудование для видеонаблюдения. Продукция Hiwatch отличается доступной ценой, качеством и легкостью установки, что делает ее особенно популярной среди домашних пользователей и небольших предприятий. В этой статье мы рассмотрим подробные шаги, необходимые для подключения и настройки камеры Hiwatch к системе видеонаблюдения.
Содержание
- Как подключить камеру Hiwatch
- Привязка камеры к личному кабинету
- Как сбросить пароль камеры
- Как сбросить настройки к заводским на Hiwatch
- Видео:
Как подключить камеру Hiwatch
В установке самой камеры нет ничего сложного — просто поставьте ее на то место, откуда собираетесь вести наблюдение. При необходимости зафиксируйте на специальные крепления. После установки камеры ее требуется активировать. Рассмотрим, как это сделать.
Наиболее простой метод активации вашей камеры состоит в использовании инструмента, разработанного компанией для настройки IP-устройств видеонаблюдения — сетевого сканера SADP. Это приложение можно загрузить с нашего Яндекс.Диска. Принцип работы очень прост: подсоедините камеру к своему компьютеру или ноутбуку и дождитесь, пока она будет обнаружена программой. При запуске, SADP автоматически просканирует локальную сеть, ища подключенные устройства, которые затем будут отображены в основном окне программы.
Начальное состояние камеры — «Неактивно». Выберите первую графу и справа появится окно, в котором вам нужно задать пароль для камеры (имейте в виду, это пароль для доступа к настройкам камеры, а не для личного кабинета).
Также активацию можно провести через веб-интерфейс.
Важно! Если камера была предоставлена Ростелекомом, веб-интерфейс камеры НЕ должен быть доступен. Если все же открывается начальная страница камеры, это значит, что ей необходимо обновить прошивку.
Для входа в веб-интерфейс вы должны использовать IP-адрес, полученный камерой, а не тот, который указан в инструкции, входящей в комплект камеры (в брошюре обычно указывается 192.168.1.64).
Как только вы перейдете на начальную страницу веб-интерфейса, вам будет предложено задать новый пароль. Нет необходимости вводить старый пароль, так как его и не существует, однако, если вдруг он есть, по умолчанию используется сочетание логин/пароль, вида admin/admin54321. После того как вы зададите новый пароль, ваша камера будет активирована.
Привязка камеры к личному кабинету
Вот инструкция:
- Активируйте камеру и готовьтесь привязать её к личному кабинету. Логин и пароль предоставляются оператором, в нашем случае — «Ростелеком». Перейдите на сайт camera.rt.ru и нажмите на «Личный кабинет», расположенный в верхнем правом углу.
- Вас перенаправят на страницу «Ростелеком Паспорт«. Здесь введите логин и пароль, предоставленные оператором «Ростелеком».
- В личном кабинете нажмите «Добавить оборудование».
Добавление оборудования - Во всплывающем окне сразу нажмите «Продолжить».
- Выберите способ подключения камеры. В нашем случае это «Ethernet».
Выбор типа подключения - Введите мак-адрес или серийный номер камеры (их можно найти с помощью программы SADP или на корпусе камеры).
Ввод Mac-адреса - Произойдет процесс привязки оборудования.
- После завершения этого недолгого процесса, камера будет добавлена в ваш личный кабинет.
Если привязка не происходит, первоочередной задачей становится проверка подключения камеры к интернету. Привязка должна происходить, когда камера имеет доступ в интернет, и отсутствует блокировка портов 80 и 443.
Как сбросить пароль камеры
Если введенный пароль к камере Hiwatch не совпадает, скорее всего, при первоначальной активации камеры был установлен другой пароль. В интернете можно найти много инструкций по сбросу пароля с помощью инструмента SADP. В этом инструменте действительно присутствует функция «Forgot Password«. Однако дальнейшие шаги предполагают отправку XML-файлов в службу поддержки, которая может занять от одного часа до дня на сброс пароля. Это явно не наш вариант.
Вместо этого мы будем придерживаться старого и надежного метода — полного сброса или «hard reset». После этого камера вернется в состояние «Inactive» (как показывает SADP), и при повторной активации вы сможете установить новый пароль.
Как сбросить настройки к заводским на Hiwatch
Чтобы выполнить полный сброс этой конкретной модели, необходимо ее разобрать, так как кнопка для сброса находится внутри корпуса.
- Отключите камеру от питания.
- Нажмите и удерживайте кнопку сброса.
- Включите питание камеры, продолжая удерживать кнопку сброса.
- Подождите примерно 10-12 секунд, а затем отпустите кнопку сброса.
Определить, произошел ли сброс по индикаторам, может быть сложно, так как их поведение может быть нестабильным. Как уже упоминалось ранее, после сброса камера переходит в состояние «Inactive». Если камера остается активной после попытки сброса, попробуйте повторить процесс.