-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
AVR 347
AUDIO/VIDEO RECEIVER
OWNER’S MANUAL
Related Manuals for Harman Kardon AVR 347
Summary of Contents for Harman Kardon AVR 347
-
Page 1
AVR 347 AUDIO/VIDEO RECEIVER OWNER’S MANUAL… -
Page 2: Safety Information
SAFETY INFORMATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 1. Read Instructions. All the safety and operating instruc- tions should be read before the product is operated. 2. Retain Instructions. The safety and operating instruc- tions should be retained for future reference. 3.
-
Page 3: Important Safety Information
• Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them. • Due to the weight of the AVR 347 and the heat generated by the amplifiers, there is the remote possibility that the rubber padding on the bottom of the SAFETY INFORMATION unit’s feet may leave marks on certain wood or veneer materials.
-
Page 4
STAPLE INVOICE HERE… -
Page 5: Table Of Contents
Step Eight – Program Sources Into the Remote Step Nine – Remote IR Inputs and Output Step Ten – Install a Multiroom System Step Eleven – Turn On the AVR 347 INITIAL SETUP Using the On-Screen Menu System Configure the AVR 347 Using EzSet/EQ…
-
Page 6: Introduction
INTRODUCTION Please register your AVR 347 on our Web site at www.harmankardon.com. Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products and/or special promotions. Thank you for choosing Harman Kardon…
-
Page 7: Audio Inputs
The AVR 347 is Simplay HD-verified for compatibility via the HDMI connection with other Simplay HD-verified products. Supplied Accessories The following accessory items are supplied with the AVR 347. If any of these items are missing, please contact Harman Kardon customer service at www.harmankardon.com.
-
Page 8: Front-Panel Controls
Remote IR Sensor: from the remote control. It is important to ensure that it is not blocked. If covering the sensor is unavoidable, such as when the AVR 347 is placed inside a cabinet, you may use an optional Harman Kardon HE 1000, or other infrared receiver, connecting it to the Remote IR Input on the AVR 347’s rear panel.
-
Page 10: Rear-Panel Connections
Interface) is a newer type of connection for transmitting digital audio and When the remote IR video signals between devices. With the AVR 347’s powerful processor, you may connect up to two HDMI-equipped source devices to the HDMI inputs using a single-cable connection, while benefiting from superior digital audio and video performance.
-
Page 11: Rear-Panel Connections
REAR-PANEL CONNECTIONS The AVR 347 is Simplay HD-verified for compatibility via the HDMI connection with other Simplay HD-verified products. CD and Tape Audio Inputs: These jacks may be used to connect audio-only source components (e.g., CD player, tape deck). Do not connect a turntable to these jacks without a phono preamp.
-
Page 13: Main Remote Control Functions
MAIN REMOTE CONTROL FUNCTIONS The AVR 347 remote is capable of controlling 11 devices, including the AVR itself and an iPod docked in the optional The Bridge accessory. During the installation process, you may program the codes for each of your source components into the remote. Each time you wish to use the codes for any component, first press the Selector button for that component.
-
Page 14
IR Transmitter Lens Power On Program Indicator AVR Selector AM/FM XM Radio Test Tone Sleep DSP Surround On-Screen Display Channel Level Digital Input Tuning Mode Direct Station Entry Tuning Tone Mode Night Mode Track Skip Transport Controls Mute Power Off Input Selectors 6-/8-Channel Input Selector Learn… -
Page 15
Press this button to access the tone controls (bass and treble). Use the Navigation Buttons to make your selections. Disc Skip: This button has no effect on the receiver, but is used with some optical disc changers to skip to the next disc. Macros: These buttons may be programmed to execute long command sequences with a single button press. -
Page 16: Zone Ii Remote Control Functions
AVR’s Remote IR Outputs. The Zone II remote may also be used in the main listening room to directly control the AVR 347 and Harman Kardon DVD, CD or tape players connected to the Remote IR outputs. In that case the power, volume and mute controls will affect only the main listening area.
-
Page 17
Power Off AVR Selector AM/FM/XM Radio Preset Up/Down – Track Skip Stop Volume Controls IR Transmitter Mute Input Selectors Tuning Up/Down – Fast Play Play Disc Skip Pause NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support section at www.harmankardon.com. -
Page 18: Introduction To Home Theater
Surround sound immerses you in the musical or film presentation for increased realism. The AVR 347 may have up to seven speakers connected directly to it (plus a subwoofer). Each main speaker is powered by its own amplifier channel inside the receiver. When more than two speakers are used, it is called a multichannel system.
-
Page 19: Connections
Figure 3 – Subwoofer Connecting Source Devices to the AVR The AVR 347 is designed to process audio and video input signals, playing back the audio and displaying the video on a television or monitor connected to the AVR. These signals originate in what are known as “source devices,”…
-
Page 20: Audio Connections
In addition, receivers and processors such as the AVR 347 may handle the incoming signal in several different ways, depending on their capability as well. The AVR 347 uses HDMI version 1.1, and is capable of processing both the audio and video components of the HDMI data, minimizing the number of cable connections in your system.
-
Page 21: Analog Audio
The AVR 347 is only capable of processing one PCM source at a time.
-
Page 22: Antennas
See Figure 14. Figure 14 – AM Antenna RS-232 Serial Port The RS-232 serial port on the AVR 347 is used only for data. If Left Right Harman Kardon releases a software upgrade for the receiver’s operating system at some time in the future, the upgrade may be downloaded to the AVR using this port.
-
Page 23: Speaker Placement
Placement of the surround speakers depends on the number of speakers in your system. If you’re using only two speakers with the AVR 347, place them in the front left and right positions, and skip to the Installation section. However, Harman Kardon recommends using the AVR 347 in a 5.1- or 7.1-channel configuration for optimal…
-
Page 24: Installation
Connect the FM and AM antennas to their terminals. If you have purchased an XM antenna module designed for connection to an XM Ready device, such as the AVR 347, you may connect it now. To enjoy XM Radio, remember to purchase a subscription and activate your antenna module.
-
Page 25
DVD player will be used. We recommend connecting your various sources using the connections shown in Table 2 (below) in order to simplify programming your receiver and remote control. However, you may connect any device to any source input. -
Page 26: Video 4 Source
Video 2 Source The Video 2 source is used only for playback. The AVR 347 remote control is programmed to operate many brands and models of cable and satellite television devices, and we recommend connecting your cable or satellite set-top box to this source.
-
Page 27
AVR (e.g., Component Video 3 or Video 3) and select that source input, then select the 6-/8-Channel Inputs for audio; the AVR 347 will retain the last video selection other than HDMI. See Figure 26. -
Page 28: Step Five — Connect Video Display
AVR 347. See Figure 33. Make sure this device draws no more than 50 watts. The device should have its mechanical or master power switch turned on, and it will power on any time the AVR 347 is turned on.
-
Page 29: Step Seven — Insert Batteries In Remote
Figure 35 – Remote Battery Compartment When using the remote, remember to point the lens toward the front panel of the AVR 347. Make sure no objects, such as furniture, are blocking the remote’s path to the receiver. Bright lights, fluorescent lights and plasma video displays may interfere with the remote’s functioning.
-
Page 30
¤ Figure 38 – Learning Remote Commands c) Press the button on the AVR 347 remote you wish to program with the new code, and the Program Indicator will light steadily in amber. d) Press and hold the button on the device’s original remote whose code you wish to “learn”… -
Page 31: Step Nine — Remote Ir Inputs And Output
See Figure 39. Figure 39 – IR Inputs and Outputs When the AVR 347 is placed in such a way that aiming the remote at the front-panel IR sensor is difficult, such as inside a cabinet or facing away from the listener, you may connect an external IR receiver, such as the optional Harman Kardon HE 1000, to the Remote IR Input jack.
-
Page 32: Step Eleven — Turn On The Avr 347
Master Power Switch in the ON position, even when the receiver is not being used. Figure 44 – Power Switches 2. There are several ways in which the AVR 347 may be turned on from Standby mode. a) Press the Standby/On Switch on the front panel. See Figure 44.
-
Page 33: Initial Setup
Before you begin enjoying your new receiver, a few adjustments should be made to configure the AVR 347 to match your actual system. Make sure that you have connected a video display to one of the video monitor outputs on the receiver. When you turn on your display and the AVR, you should see a blue screen.
-
Page 34: Configure The Avr 347 Using Ezset/Eq
See Figure 51. Figure 51 – Plug EzSet/EQ microphone into receiver. Step Three – Make sure that the AVR 347 and the video display are turned on. Press the OSD Button to display the Menu System. See Figure 48. Use the Buttons to move the cursor to the Speaker ⁄…
-
Page 35: What Ezset/Eq Does
Figure 57 – EzSet/EQ: Speaker Distance Test NOTE: The AVR 347 is also capable of setting a different type of delay, called A/V Sync Delay. A/V Sync Delay is used to compensate for lip sync problems that may occur when a video…
-
Page 36: Configure Sources
INITIAL SETUP display device or set-top box causes delays while digital video signals are processed. It simultaneously adds a delay to all speaker channels in the system. A/V Sync Delay is not set during EzSet/EQ. It may be set while watching a program as follows: press the Delay Button on the remote and the first setting displayed is A/V Sync Delay.
-
Page 37
NOTE: If your video display has an HDMI input, then you only need to connect the AVR’s HDMI Output to the display. The AVR 347 transcodes analog source video signals up to 720p from composite, S-video or component video to the HDMI format, and is also capable of upscaling the signal up to 720p to match your display’s capabilities. -
Page 38
AUTO POLL: The Auto Poll feature is used when both an analog audio and digital audio connection have been made for one source device. If for some reason no digital signal is available, the AVR 347 will switch to the analog inputs for the source. This situation can occur with some cable or satellite television broadcasts, where some channels are broad- cast with digital audio and others with analog audio. -
Page 39: Operation
See Figure 63. Figure 63 – Power Switches There are several ways in which the AVR 347 may be turned on: a) Press the Standby/On Switch on the front panel. See Figure 63.
-
Page 40: Mute Function
For direct access to any source, press its Input Selector on the remote (see Figure 65). Since the AVR 347 allows for more source input devices than the remote has buttons for, some sources are required to share buttons. These are the DVD and CD sources, the Tape and…
-
Page 41: Audio Input Selection
The VIDEO IN line of the Input Setup menu indicates which of the video inputs on the AVR 347 is assigned to each source. As shown in Table 5, by default the Component Video 1 input is assigned to the DVD source, the Component Video 2 input is assigned to the Video 1 source, and the Component Video 3 input is assigned to the Video 2 source.
-
Page 42: Channel Direct Inputs
6-/8-Channel Inputs for the audio. Example 1: You would like to connect a DVD-Audio player to the AVR 347. You plan on playing a variety of discs using this player, including conventional DVDs and even CDs, as well as multichannel discs.
-
Page 43: Xm Radio Operation
XM Radio is a satellite-delivered service that offers hundreds of program channels, as well as local traffic and weather information for select cities. The AVR 347 is “XM Ready,” which means that it is able to receive the OPERATION XM service when an optional XM antenna module is connected and the service activated.
-
Page 44: Recording
The Bridge is an optional dock that may be used with a compatible iPod (not included). When The Bridge is connected to its proprietary input on the AVR 347 and the iPod is docked, you may play the audio, video and still-image materials on your iPod through your high-quality audio/ video system, operate the iPod using the AVR remote or the AVR’s…
-
Page 45: Using The Bridge
Message Display. The lower line will display the elapsed time of the track on the left, the play mode icon, and the time remaining on the right. In addition, if a video display is connected to the AVR 347, a screen will appear briefly to display information about the iPod’s status and the track.
-
Page 46: Selecting A Surround Mode
Surround mode selection can be as simple or sophisticated as your individual system and tastes. Feel free to experiment with the many available surround modes on the AVR 347, and you may find a few that become your favorites for certain sources or program types. Although…
-
Page 47: Advanced Functions
5.1-channel configuration. New formats, such as Dolby TrueHD and Dolby Digital Plus, may be available in 7.1-channel configurations on the future. The AVR 347 will not be able to play native 7.1-channel programs unless the source device outputs a 5.1- or 6.1-channel version.
-
Page 48: Surround Modes
There is no harm in experimenting with all of the modes available with any given source material. Table 8 offers a brief description of each mode the AVR 347 is capable of using, and also indicates the types of incoming signals or digital bitstreams the mode may be used with.
-
Page 49: Dolby Surround Settings
Default Modes During initial use or after a processor reset, the AVR 347 will default to the Logic 7 7CH Music mode for all analog and PCM audio inputs. Subsequently, when a source input is selected and an analog or PCM signal is received, the AVR will switch to the last surround mode used for that source input/incoming signal combination.
-
Page 50
Dolby Pro Logic IIx modes may be selected not only with Dolby Digital bit- streams, but thanks to the AVR 347’s post-processor, they may also be used with some DTS bitstreams to add a surround back channel to 5.1 modes. -
Page 51
Surround Mode Description Dolby Pro Logic IIx This mode is similar to Dolby Pro Logic II Music, including the availability Music of center width, dimension and panorama adjustments. Dolby Pro Logic IIx Music adds a surround back channel. In addition, it may be selected even when some types of DTS signals are present. -
Page 52
Cinema encoding, Logic 7 Cinema mode increases center channel intelligibility. Logic 7 The AVR 347 is programmed at the factory to default to this mode for Music 2-channel signals. Logic 7 Music mode is well suited to conventional 2-channel music recordings. -
Page 53: Manual Setup
Manual Setup The AVR 347 is flexibly designed to be used with almost any loud- speakers available. The flexibility arises from the AVR 347’s capability to be configured to match the characteristics of your particular speakers, and to compensate for the acoustic characteristics of your room.
-
Page 54: Speaker Size Menu
Buttons to select the SMALL, LARGE or NONE setting for the surround back speakers. The AVR 347 is one of the few receivers in its class to include multi- room capability. With assignable surround back amplifier channels, set- ting up a multiroom system is more convenient than ever, no longer requiring an external amplifier to power the remote speakers.
-
Page 55: Speaker Crossover Menu
Use this setting if you have a passive subwoofer, or a powered subwoofer that you connected to the front speaker outputs. NOTE: If you are using a Harman Kardon HKTS speaker system, select the SMALL setting for the LEFT/RIGHT, CENTER, SURROUND and SURR BACK lines, and the subwoofer will automatically be set to SUB (LFE).
-
Page 56: Step Four — Setting Channel Output Levels Manually
With up to seven main channels plus a subwoofer, imaging becomes both more critical and more complex. Unlike the rotary balance control, the goal of the AVR 347’s channel output adjustment process is to examine the output level of each channel independently and ensure that each is heard at the listening position with equal loudness.
-
Page 57: Video Adjustments
Set Button and use the Buttons to adjust the level as desired. ADVANCED FUNCTIONS Buttons to If you would like to set your levels using the AVR 347’s internal test ⁄ ¤ tone, adjust the TEST TONE SEQ and TEST TONE lines as follows.
-
Page 58: Multiroom Operation
Tuning Mode Button to select monaural operation for FM radio stations. If you wish to use the AVR 347 with more than one remote room, you will need to purchase a multichannel external amplifier that enables you to connect several pairs of loudspeakers, or use an A-BUS hub.
-
Page 59: Operating The Multiroom System
Figure 95 – Multiroom Button System Settings The AVR 347 offers several system settings that allow you to make the receiver easier to use rather than directly affecting performance. Most of these settings may be accessed from the System Setup menu, which is selected by pressing the OSD Button and navigating to the System tab.
-
Page 60: Dim Function
Set Button to select it. Advanced Remote Control Functions The AVR 347 remote control not only operates the AVR 347, but it also serves as a universal remote that may be programmed to operate many other home theater components, as described in the Installation section.
-
Page 61: Macros
Processor Reset There may be instances when you wish to fully reset the AVR 347 to its factory defaults, or the unit may behave erratically after a power surge. To correct erratic behavior, first try turning the Master Power Switch off and unplugging the AC power cord for at least three minutes.
-
Page 62: Troubleshooting Guide
Remote behaves erratically Additional information on troubleshooting possible problems with your AVR 347, or installation-related issues, may be found in the list of “Frequently Asked Questions” , which is located in the Product Support section of our Web site at www.harmankardon.com.
-
Page 63: Technical Specifications
Height measurement includes feet and chassis. All features and specifications are subject to change without notice. Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. EzSet/EQ, of Harman International Industries, Incorporated.
-
Page 64: Appendix
APPENDIX Appendix – Default settings, worksheets, remote product codes Table A1 – Source Input Setting Defaults Source HDMI 1 HDMI 2 Title Video Input Comp V 1 HDMI 1 HDMI 2 Audio Input Coax 1 HDMI 1 HDMI 2 Auto Poll Surround Logic 7 Logic 7…
-
Page 65
Table A4 – Source Input Settings Source DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP Title Video Input Audio Input Auto Poll Surround Mode Tone Mode Bass Treble Video Mode Table A5 – Speaker/Channel Settings Source DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP CD Tape Tuner 6-/8-Channel Left/Right Speaker Size… -
Page 66
APPENDIX Table A6 – Remote Control Codes Source Input Product Type (circle one) Video 1 VCR, PVR Video 2 Cable, Satellite Video 3 Video 4 CD, CDR Tape Cassette HDMI 1 DVD, VCR, PVR, Cable Satellite HDMI 2 DVD, VCR, PVR, Cable Satellite Table A7 –… -
Page 67
Refer to the numbered buttons in Figure 97 when using the Function List. Figure 97 – Remote Control Function List Reference APPENDIX 53 54… -
Page 68
APPENDIX Table A8 – Remote Control Function List No. Button Name AVR Function CD/CD-R 1 Power On Power On Power On Power On 2 Power Off Power Off Power Off Power Off 3 Mute Mute Mute Mute 4 AVR AVR Sel e ct AVR Sel e ct AVR Sel e ct 5 DVD/CD… -
Page 69
Table A8 – continued No. Button Name AVR Function CD/CD-R 43 0 44 Memory Memory Audi o or Pl a yl i s t Ti m e 45 Tuning Up Tuning Up Next Chapter Track Direct 46 Direct Direct Tuner Entry Angle Random Play 47 Clear Clear… -
Page 70
CRAIG CROWN CURTIS MATHES DAEWOO DAYTRON DIGI LINK DYNASTY DYNATECH ELECTROHOME EMERSON FUNAI FUTURETECH GOLDSTAR/LG GRUNDIG HALL MARK HARMAN KARDON HITACHI INFINITY INKEL JC PENNEY JENSEN KAWASHO KENWOOD TV Manufacturer/Brand Setup Code Number LLOYTRON LODGENET LOGIK LUXMAN MAGNAVOX MARANTZ MATSUI… -
Page 71
Table A9 – continued TV Manufacturer/Brand Setup Code Number LOGIK LUXMAN MAGNAVOX MARANTZ MATSUI MEMOREX METZ MINERVA MITSUBISHI NATIONAL NIKEI ONKING ONWA OPTONICA ORION PANASONIC PHILCO PHILIPS PIONEER PORTLAND PROSCAN PROTON QUASAR RADIO SHACK REALISTIC RUNCO SAMPO SAMSUNG SANYO SCOTT SEARS SHARP SIEMENS… -
Page 72
DAYTRON 018 048 DYNATECH EMERSON 013 040 042 FISHER FUNAI 076 095 124 GO VIDEO GOLDSTAR/LG 018 107 HARMAN KARDON 002 003 018 HITACHI 040 048 JC PENNEY 018 045 JENSEN 018 048 111 KENWOOD 020 048 LLOYD 020 040… -
Page 73
187 188 213 EMERSON 052 093 108 FISHER 055 095 FRABA FUNAI GENEXXA GOLDSTAR/LG 016 087 HAITAI 099 214 HARMAN KARDON 001 002 025 HITACHI INKEL JC PENNEY 098 147 JENSEN 176 195 196 KENWOOD 030 062 078 178 181 LOTTE… -
Page 74
Table A12 – Remote Control Product Codes – DVD DVD Manufacturer/Brand Setup Code Number APEX DIGITAL DENON 019 051 003 004 GOLDSTAR/LG 005 055 064 HARMAN KARDON 001 002 068 MAGNAVOX MARANTZ MITSUBISHI ONKYO 009 048 PANASONIC 024 030 044… -
Page 75
Table A14 – Remote Control Product Codes – TAPE Tape Manufacturer/Brand Setup Code Number HARMAN KARDON Table A15 – Remote Control Product Codes – CBL CBL Manufacturer/Brand Setup Code Number 001 011 ALLEGRO AMERICAST ARCHER BELCOR CABLE STAR 033 113… -
Page 76
® 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2007 Harman International Industries, Incorporated. All rights reserved. Part No. CQX1A1185Z…
инструкцияHarman Kardon AVR 347
AUDIO/VIDEO RECEIVER
OWNER’S MANUAL
AVR347 om.qxd 7/10/07 11:00 AM Page 1
Посмотреть инструкция для Harman Kardon AVR 347 бесплатно. Руководство относится к категории приемники, 5 человек(а) дали ему среднюю оценку 9.1. Руководство доступно на следующих языках: английский. У вас есть вопрос о Harman Kardon AVR 347 или вам нужна помощь? Задайте свой вопрос здесь
Главная
Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Harman Kardon AVR 347.
Когда звук считается слишком громким?
Уровень звука выше 80 децибел может нанести вред слуху. Уровень звука выше 120 децибел может нанести прямое повреждение слуху. Вероятность повреждения слуха зависит от частоты и продолжительности прослушивания.
Могут ли устройства разных марок подключаться друг к другу при помощи Bluetooth?
Да, Bluetooth — универсальный метод, позволяющий различным устройствам, оснащенным Bluetooth, подключаться друг к другу.
Что такое Bluetooth?
Bluetooth — это способ обмена данными по беспроводной сети между электронными устройствами с помощью радиоволн. Расстояние между двумя устройствами обменивающимися данными в большинстве случаев составляет не более десяти метров.
Что такое HDMI?
HDMI расшифровывается как «интерфейс для мультимедиа высокой четкости». Кабель HDMI используется для передачи аудио- и видеосигналов между устройствами.
Как лучше всего выполнять чистку приемник?
Для удаления отпечатков пальцев лучше всего использовать слегка влажную салфетку для уборки или мягкую чистую ткань. Пыль в труднодоступных местах лучше всего удаляется потоком сжатого воздуха.
Что такое Dolby Atmos?
Dolby Atmos — это технология, которая обеспечивает отражение звука от потолка к месту нахождения слушателя. Это позволяет создать эффект 5.1 при помощи всего лишь одного динамика.
Инструкция Harman Kardon AVR 347 доступно в русский?
К сожалению, у нас нет руководства для Harman Kardon AVR 347, доступного в русский. Это руководство доступно в английский.
Не нашли свой вопрос? Задайте свой вопрос здесь
Если у вас отсутствует техническая возможность для скачивания Инструкция по эксплуатации для Harman Kardon 347
вы можете прочесть документ прямо на нашем сайте или
Скачать Harman Kardon 347 Инструкция по эксплуатации
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
Инструкции для прочих Harman Kardon Стереоресиверы
Инструкции для прочих Harman Kardon
249 ₽
Инструкция (руководство пользователя) на Аудио/видео ресивер Harman Kardon AVR-347
Артикул: harman-kardon-avr-347
Категория: Harman Kardon
-
Описание
-
Детали
Описание
Инструкцию по эксплуатации Harman Kardon AVR-347 на русском языке можно будет скачать в личном кабинете после оформления и оплаты заказа.
Детали
| Формат файла |
|
|---|---|
| Размер инструкции в кб |
2278 |
-
Страница 1
ENGLISH A VR 347 Audio/ V ideo Receiver OWNER’S MANU AL 34 7[…]
-
Страница 2
2 T ABLE OF CONTENTS 3 Introduction 4 Safety Information 5 Unpacking 6 F ront P anel Controls 8 Rear P anel Connections 11 Main Remote Control Functions 15 Zone II Remote Control Function 17 Installation and Connections 17 Audio Equipment Connections 17 HDMI Input Connections 17 HDMI Output Connections 18 Video Equipment Connections 19 SCAR T A/V C[…]
-
Страница 3
INTRODUCTION 3 ENGLISH Introduction Thank you for choosing Harman Kardon! With the purchase of a Harman Kardon A VR 347 you are about to begin many years of listening enjoyment. Designed to provide all the excitement and detail of movie soundtracks and every nuance of musical selections , the A VR 347 is truly a multichannel receiver for the new mi[…]
-
Страница 4
4 SAFETY INFORMA TION Safety Information ■ Dolby* Digital, Dolby Digital EX and Dolby Pro Logic* II and IIx Decoding, and the full suite of DTS ® modes , including DTS-ES ® 6.1 Discrete & Matrix and Neo:6 ® ■ Seven channels of high-current amplifi- cation with two channels assignable to either surround back or multiroom applications ■ […]
-
Страница 5
SAFETY INFORMA TION 5 ENGLISH Safety Information Installation Location ■ T o assure proper operation and to avoid the potential for safety hazards , place the unit on a firm and level surface . When placing the unit on a shelf , be certain that the shelf and any mounting hardware can support the weight of the product. ■ Mak e certain that prope[…]
-
Страница 6
6 FRONT P ANEL CONTROLS 1 Main P ower Switch: Press this button to apply power to the A VR. When the switch is pressed in, the unit is placed in a Standby mode , as indicated by the or ange LED 3 . T his button MUST be pressed in to operate the unit. T o turn the unit off completely and prevent the use of the remote control, this switch should be p[…]
-
Страница 7
FRONT P ANEL CONTROLS 7 ENGLISH 7 Selector Buttons: When you are establishing the A VR’ s configuration settings , use these buttons to select from the choices available , as shown in the Main Information Display Ò . 8 T one Mode: Pressing this button enables or disables the Balance , Bass and T reble tone controls . When the button is pressed s[…]
-
Страница 8
8 REAR P ANEL CONNECTIONS Rear P anel Connections 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f AM Antenna FM Antenna T ape Inputs T ape Outputs Subwoofer Output DVD Audio Inputs CD Inputs Video 1 Audio Outputs DMP Connector 8-Channel Direct Inputs Digital Audio Outputs Video Monitor Outputs DVD Video Inputs F […]
-
Страница 9
REAR P ANEL CONNECTIONS 9 ENGLISH Rear P anel Connections 9 8-Channel Direct Inputs: T hese jacks are used for connection to source devices such as DVD-Audio , Blu-r ay , HD-DVD or SA CD players with discrete analog outputs . Depending on the source device in use , all eight jacks may be used, though in many cases only connections to the front left[…]
-
Страница 10
10 REAR P ANEL CONNECTIONS Rear P anel Connections U Remote IR Output: This connection per- mits the IR sensor in the receiver to serve other remote controlled devices . Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment. V Remote IR Input: If the A VR’ s front-panel IR sensor is block ed due to cabinet doors[…]
-
Страница 11
MAIN REMO TE CONTROL FUNCTIONS 11 ENGLISH Main Remote Control Functions 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q P ower Off Button IR T ransmitter Window Program Indicator P ower On Button Input Selectors A VR Selector AM/FM T uner Select 6-Channel/8-Channel Di[…]
-
Страница 12
12 MAIN REMO TE CONTROL FUNCTIONS Main Remote Control Functions IMPORT ANT NO TE: The A VR 347’ s remote may be programmed to control up to seven devices , including the A VR. Before using the remote , it is important to remember to press the Input Selector button 4 that corresponds to the unit you wish to operate . In addition, the A VR’ s rem[…]
-
Страница 13
MAIN REMO TE CONTROL FUNCTIONS 13 ENGLISH Main Remote Control Functions E ‹ Button: T his button is used to change the menu selection or setting during some of the setup procedures for the A VR. F Set Button: T his button is used to enter settings into the A VR’ s memory . It is also used in the setup procedures for delay time , speak er config[…]
-
Страница 14
14 MAIN REMO TE CONTROL FUNCTIONS Main Remote Control Functions Memory Button: Press this button to enter a radio station into the A VR ’ s preset memory . T wo underline indicators will flash at the right side of the Main Information Display Ò , you then have five seconds to enter a preset memory location using the Numeric K eys H . (See pa[…]
-
Страница 15
ZONE II REMO TE CONTROL FUNCTIONS 15 ENGLISH Zone II.2 Remote Control Functions K D J G H I F C C B B E A A P ower Off B A VR Selector C AM/FM T uner Select D Input Selectors E Disc Skip F V olume Up/Down G Mute H T r ansport Controls I /DMP Selector J T uning Up/Down K Preset Up/Down NO TE: The Zone II.2 remote may be used in either the same room […]
-
Страница 16
16 ZONE II REMO TE CONTROL FUNCTIONS Zone II.2 Remote Control Functions I Digital Media Player (DMP) Selector: When Harman Kardon’ s (optional) is connected to Digital Media Player (DMP) Connector 8 and a compatible Apple ® iP od ® is docked in , pressing this selector will select the iP od as the audio source input device for the A VR 347. In […]
-
Страница 17
INST ALLATION AND CONNECTIONS 17 ENGLISH After unpacking the unit, and placing it on a solid surface capable of supporting its weight, you will need to mak e the connections to your audio and video equipment. Audio Equipment Connections T here are two formats for audio connections: digital and analog. Digital audio signals are of higher quality , a[…]
-
Страница 18
18 INST ALLATION AND CONNECTIONS 3. Connect the digital output of any digital sources such as a CD or DVD changer or player , advanced video game , a digital satellite receiver , HDTV tuner or digital cable set-top box or the output of a compatible computer sound card to the Optical and Coaxial Digital Inputs NR *Ó . We recommend connecting the co[…]
-
Страница 19
INST ALLATION AND CONNECTIONS 19 ENGLISH Installation and Connections 1. Connect a VCR’ s audio and video Play/Out jacks to the Video 2 In jacks MT on the rear panel. The Audio and Video Record/In jacks on the VCR should be connected to the Video 1 Out jacks P7 on the A VR. 2. Although any video device may be connected to these jacks , we recomme[…]
-
Страница 20
20 INST ALLATION AND CONNECTIONS Installation and Connections Note that only the video plugs (the «yellow» cinch plug in fig. 3 and the S-Video plug in fig. 6) must be connected to the TV Monitor Output B , and the volume on the TV must be reduced to minimum. Important Note for Adapter Cables: If the cinch connectors of the adapter you’[…]
-
Страница 21
INST ALLATION AND CONNECTIONS 21 ENGLISH Installation and Connections System and P ower Connections T he A VR 347 is designed for flexible use with multiroom systems , external control components and power amplifiers . Main Room Remote Control Extension If the receiver is placed behind a solid or smok ed glass cabinet door , the obstruction may pre[…]
-
Страница 22
22 INST ALLATION AND CONNECTIONS Installation and Connections Speaker Selection No matter which type or brand of speak ers is used, the same model or brand of speak er should be used for the front-left, center and front-right speak ers. T his creates a seamless front soundstage and eliminates the possibility of distracting sonic disturbances that o[…]
-
Страница 23
SY STEM CONFIGURATION 23 ENGLISH System Configuration Subwoofers produce largely nondirectional sound, so they may be placed almost anywhere in a room. Actual placement should be based on room size and shape and the type of subwoofer used. One method of finding the optimal location for a subwoofer is to begin by placing it in the front of the room,[…]
-
Страница 24
24 SY STEM CONFIGURATION T he factory default settings for the A VR 347 have all inputs configured for an analog audio input except for the DVD input, where the Coaxial Digital Input N is the default and the Video 2 input, where the Optical Digital Audio Input R is the default. Once the DSP processing system is used for the first time for any input[…]
-
Страница 25
SY STEM CONFIGURATION 25 ENGLISH System Configuration Y ou may edit a title by inserting or deleting char- acters . T o insert a new character between two existing characters , move the cursor to highlight the character to the right of the insertion point- ing the bar at the top of the screen. Then high- light the INS indicator on screen and press […]
-
Страница 26
26 SY STEM CONFIGURATION T he first line controls whether or not the bass/ treble tone controls are in the signal path. The normal default is for them to be in-line , but if you wish to remove them from the circuit for “flat” response , first mak e certain that the Tone I n line is highlighted in blue, and press the Set Button F , followed by t[…]
-
Страница 27
SY STEM CONFIGURATION 27 ENGLISH System Configuration Figure 10 T o change these parameters , press the ⁄ / ¤ Navigation Buttons D while the Surround menu is on the screen until the line on the menu with the parameter you wish to change is highlighted in blue . T hen, press the Set Button F and the ‹ / › Navigation Buttons E to alter the […]
-
Страница 28
28 SY STEM CONFIGURATION On the DSP ( SURR ) menu, the selection choices made with the ‹ / › Buttons E on the remote select one of the DSP surround modes that are designed for use with two-chan- nel stereo programs to create a v ariety of sound field presentations . T he choices available are 5.1 or 6.1 modes of Hall 1, Hall 2 and T heater .[…]
-
Страница 29
SY STEM CONFIGURATION 29 ENGLISH System Configuration Step 2: The EzSet/EQ microphone should be placed in either your usual listening position or , if there is a large seating area, the center of the room, at the listeners’ ear level. Y ou may find it convenient to use a camera tripod for stable placement of the EzSet/EQ microphone at the correct[…]
-
Страница 30
30 SY STEM CONFIGURATION System Configuration Figure 18 If at any time the test tone is not heard from the speak er indicated on screen, press the Set Button F to stop EzSet/EQ . T urn off the A VR using the Master P ower Switch 1 and check your speak er connections. Make sure all wires are connected to the correct speak ers and Speaker Outputs DEF[…]
-
Страница 31
SY STEM CONFIGURATION 31 ENGLISH System Configuration Figure 23 Unplug the microphone and store it in a safe place so that it is available to recalibr ate your system if needed due to a change in speak ers, preferred listening position, or a major change in the room’ s furnishings (such as the addition of thick carpeting or plush furniture) that […]
-
Страница 32
32 SY STEM CONFIGURATION System Configuration NO TE: When the front speakers are set to the LARGE option and the surround mode is set to «Surround Off», or pure two-channel stereo , when an analog signal source is present it will be routed directly from the input to the volume control without being digitized or processed. If you have full[…]
-
Страница 33
SY STEM CONFIGURATION 33 ENGLISH System Configuration T o select that option press the ‹ / › Buttons E on the remote so that SUB (LFE) appears in the on-screen menu. • If a subwoofer is connected and you wish to use it for bass reproduction in conjunction with the main front left/right speak ers, regard- less of the type of program source […]
-
Страница 34
34 SY STEM CONFIGURATION As an example , in the Figure below , all speak ers are set for “large, ” and a subwoofer is set. Delay Settings Due the different distances between the listen- ing position for the front channel speak ers and the surround speak ers, the amount of time it tak es for sound to reach your ears from the front or surround sp[…]
-
Страница 35
SY STEM CONFIGURATION 35 ENGLISH System Configuration Note that the A/V Sync delay setting is unique to each video input source , so you may enter a dif- ferent setting to compensate for the differences between any product attached to the Video 1, 2, 3 or 4 inputs . T o change one of the individual speaker posi- tions directly , press the Delay Sel[…]
-
Страница 36
36 SY STEM CONFIGURATION hear the test tone twice from the back speak er , once with the SBL indication and once with the SBR indication. This is normal, and it allows you to adjust the output balance for the mixing cir- cuit that creates a 6.1 output when 7.1 modes such as Logic 7/7.1 are used. 6. After checking for speak er placement, let the tes[…]
-
Страница 37
OPERA TION 37 ENGLISH Operation Surround Mode Chart MODE FEA TURES DOLBY DIGIT AL Available only with digital input sources encoded with Dolby Digital data. It provides up to five separate main audio channels and a special dedicated Low F requency Effects channel. DOLBY DIGIT AL EX Available when the receiver is configured for 6.1/7.1 channel oper […]
-
Страница 38
38 OPERA TION Surround Mode Chart MODE FEA TURES DTS Neo:6 Cinema T hese two modes are available when any analog source is playing to create a six-channel DTS Neo:6 Music surround presentation from conventional Matrix-encoded and traditional Stereo sources . Select the Cinema version of Neo:6 when a program with any type of analog Matrix surround e[…]
-
Страница 39
OPERA TION 39 ENGLISH Operation Basic Operation Once you have completed the setup and configu- ration of the A VR, it is simple to operate and enjoy . T he following instructions should be followed for you to maximize your enjoyment of your new receiver: T urning the A VR On or Off • When using the AVR for the first time , you must press the Main[…]
-
Страница 40
40 OPERA TION Operation 6-Channel/8-Channel Direct Input • T here are two input choices available for use with sources such as a DVD-Audio or SACD player that are connected to the 8-Channel Direct Inputs 9 . Select the appropriate input according to the way your system and source equipment is configured: • T he 6 C H DIRECT INPUT should be used[…]
-
Страница 41
OPERA TION 41 ENGLISH Operation T o select a surround mode using the remote control, press the button for the major surround mode group that includes the mode you wish to choose from: Dolby M , DTS Surround N , DTS Neo:6 , Logic 7 O , Stereo or DSP Surround A . The first press of the but- ton will show the current mode from that group if it[…]
-
Страница 42
42 OPERA TION Operation When the digital source is playing, the A VR will automatically detect whether it is a multichannel Dolby Digital or DTS source or a conventional PCM signal, which is the standard output from CD players . Note that a digital input (e .g. coaxial) remains associated with any analog input (e .g. DVD) as soon as it is selected,[…]
-
Страница 43
OPERA TION 43 ENGLISH Operation When Dolby Digital 3/2/.1 or DTS 3/2/.1 signals are being played, the A VR will automatically switch to the proper surround mode , and no other processing may be selected. When a Dolby Digital signal with a 3/1/0 or 2/0/0 signal is detected you may select any of the Dolby sur- round modes . If the EX flag is off , an[…]
-
Страница 44
44 OPERA TION Operation In most cases this will be 4 8 KHZ , though in the case of specially mastered, high-resolution audio discs you will see a 9 6 KHZ indication. T he PCM 4 8 KHZ indication will also appear when modes or inputs are changed for analog sources . In those cases the system is telling you the sampling frequency used internally at th[…]
-
Страница 45
OPERA TION 45 ENGLISH Operation connecting its analog audio outputs to the appropriate analog inputs (e .g. DVD) of the A VR. Additionally , the digital signals will be passed through to the Digital Audio Outputs A . T ape Recording In normal operation, the audio or video source selected for listening through the A VR is sent to the record outputs […]
-
Страница 46
46 OPERA TION Operation After a period of time the screen may disappear from view . T he length of time is set using the Full-OSD T ime Out setting in the System Settings menu (described in the Advanced Functions sec- tion). Y ou may restore the Now Playing screen to view by pressing either of the ‹ / › Buttons E , and you may then navigate […]
-
Страница 47
MUL TIROOM OPERA TION 47 Multiroom Oper ation Multiroom T he A VR is fully equipped to operate as the con- trol center for a complete multiroom system that is capable of sending one source to a second zone in the house while separate source is lis- tened to in the main room. In addition to provid- ing for control over the selection of the remote so[…]
-
Страница 48
48 MUL TIROOM OPERA TION As long as an IR feed to the A VR has been established from the remote room, using any of the buttons on either remote will control the remote location volume F , change the tuner frequency K , change the tuner preset or mute the output G . If the Remote IR Output jack U on the A VR is connected to an IR Input j[…]
-
Страница 49
ADV ANCED FEATURES 49 ENGLISH Video Adjustments Advanced Featur es Video Adjustments T he A VR 347 includes sophisticated DCDi by F aroudja video processing that delivers enhanced video quality , even for older analog video source components , as well as upgr aded on-screen displays . When upscaling video materials from a lower resolution to a high[…]
-
Страница 50
50 ADV ANCED FEATURES If you wish to mak e adjustments to other items on the SYSTEM SETUP menu, press the ⁄ / ¤ Navigation Button D to place the blue cursor bar on the desired item and press the Set Button F to mak e an adjustment to another menu. If you have completed all adjust- ments , press the OSD Button L to exit the menu system. T urn On […]
-
Страница 51
TUNER OPERA TION 51 T uner Operation Basic T uner Operation T he A VR 347’ s tuner is capable of tuning AM, FM and FM Stereo broadcast stations and receiving RDS data. Stations may be tuned manually, or they may be stored as favorite station presets and recalled from a 30 position memory . Station Selection 1. Press the AM/FM T uner Select button[…]
-
Страница 52
52 TUNER OPERA TION RDS Operation T he A VR 347 is equipped with RDS (Radio Data System), which brings a wide range of informa- tion to FM radio . Now in use in many countries , RDS is a system for transmitting station call signs or network information, a description of station program type , text messages about the station or specifics of a musica[…]
-
Страница 53
PROGRAMMING THE REMOTE 53 ENGLISH Progr amming the Remote T he A VR 347 is equipped with a powerful remote control that will control not only the receiver’ s functions , but also most popular brands of audio and video equipment, including CD players , TV sets , cable boxes , VCRs, satellite receivers and other home-theater equipment. Once the A V[…]
-
Страница 54
54 PROGRAMMING THE REMOTE Example: One blink, followed by a one-second pause , followed by six blinks , followed by a one- second pause , followed by four blinks indicates that the code has been set to 164. F or future reference enter the Setup Codes for the equipment in your system here: DVD ____________ CD ________________ VID1/VCR ________ VID3/[…]
-
Страница 55
PROGRAMMING THE REMOTE 55 ENGLISH Progr amming the Remote Macro Progr amming Macros enable you to easily repeat frequently used combinations of commands with the press of a single button on the A VR’ s remote control. Once programmed, a macro will send out up to 19 different remote codes in a pre-determined sequential order enabling you to automa[…]
-
Страница 56
56 PROGRAMMING THE REMOTE Progr amming the Remote Notes on Using the A VR Remote With Other Devices . • Manufacturers may use different code sets for the same product category . F or that reason, it is important that you check to see if the code set you have entered operates as many controls as possible . If it appears that only a few functions o[…]
-
Страница 57
PROGRAMMING THE REMOTE 57 ENGLISH Progr amming the Remote Resetting the Remote Memory As you add components to your home-theater system, occasionally you may wish to totally reprogram the remote control without the confu- sion of any commands , macros or ”Punch- T hrough“ programming that you may have done . T o do this, it is possible to reset[…]
-
Страница 58
58 FUNCTION LIST Function List No . Button Name A VR Function DVD CD/CD-R T ape 1 P ower On P ower On P ower On P ower On P ower On 2 P ower Off P ower Off P ower Off P ower Off P ower Off 3 Mute Mute Mute Mute Mute 4 AV R A VR Select A VR Select A VR Select A VR Select 5 DVD/ DVD Input Select DVD Select DVD Select DVD Select CD CD Input Select CD […]
-
Страница 59
FUNCTION LIST 59 ENGLISH Function List No . Button Name VCR (VID 3) TiV o (VID 1) CBL (VID 2) SA T (VID 2) TV (VID 1) (DMP) HDMI 1/2 1 P ower On P ower On P ower On P ower On P ower On Power On 2 P ower Off P ower Off P ower Off Power Off P ower Off P ower Off 3 Mute Mute Mute Mute Mute Mute Mute 4 AV R A VR Select A VR Select A VR Select A VR Sele[…]
-
Страница 60
60 TROUBLESHOO TING GUIDE T roubleshooting Guide Processor Reset In the rare case where the unit’ s operation or the displays seem abnormal, the cause may involve the erratic oper ation of the system’s memory or microprocessor . T o correct this problem, first unplug the unit from the AC wall outlet and w ait at least three minutes . After the […]
-
Страница 61
TECHNICAL SPECIFICA TIONS 61 ENGLISH T echnical Specifications Audio Section Stereo Mode Continuous Average P ower (FTC) 70 W atts per channel, 20Hz–20kHz, @ < 0.07% THD , both channels driven into 8 ohms 7 Channel Surround Modes P ower Per Individual Channel F ront L&R channels: 55 W atts per channel, @ < 0.07% THD , 20Hz–20kHz into […]
-
Страница 62
62 APPENDIX APPENDIX – SETTINGS W ORKSHEET Appendix – Default settings, worksheets, remote product codes T able A1 – Source Input Setting Defaults Source DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/ CD T ape T uner 6-/8- DMP Channel Title I NT . TUNER Video Input Comp V 1 HDMI 1 HDMI 2 Comp V 2 Comp V 3 Composite Composite Th[…]
-
Страница 63
APPENDIX 63 ENGLISH T able A4 – Source Input Settings Source DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP CD T a pe T uner 6-/8-Channel Title Video Input Audio Input The Bridge/DMP T uner 6-Channel Auto Poll — — — Surround Mode T one Mode Bass T reble T able A5 – Speaker/Channel Settings Source DVD HDMI 1 HDMI 2 Video […]
-
Страница 64
250 Crossways P ark Drive, Woodbury , New Y ork 11797 www .harmankardon.com Harman Consumer Group , Inc.: 2, route de Tours , 72500 Château-du-Loir , F rance © 2007 Harman Kardon, Incorporated P art No.: CQX1A1259Z[…]