Gigabyte ga b85m d3h инструкция на русском

1. Manuals
2. Brands
3. Gigabyte Manuals
4. Motherboard
5. GA-B85M-D3H
6. User manual

• Page 1
  GA-B85M-D3H User’s Manual Rev. 1001 12ME-B85MD3H-1001R…

• Page 2: Identifying Motherboard Revision

  Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE’s prior written permission.

• Page 3: Table Of Contents

  Table of Contents GA-B85M-D3H Motherboard Layout …………….4 GA-B85M-D3H Motherboard Block Diagram …………..5 Chapter 1 Hardware Installation ………………6 Installation Precautions ………………6 1-2 Product Specifications ………………7 Installing the CPU and CPU Cooler …………..9 Installing the Memory ………………9 Installing an Expansion Card …………….. 10 Back Panel Connectors ………………

• Page 4: Ga-B85M-D3H Motherboard Layout

  GA-B85M-D3H Motherboard Layout KB_MS_USB SYS_FAN1 CPU_FAN ATX_12V_2X4 LGA1150 HDMI R_USB30 USB_LAN Realtek ® GbE LAN GA-B85M-D3H AUDIO SYS_FAN2 PCIEX16 PCI1 Intel ® B_BIOS PCI2 M_BIOS CODEC CLR_CMOS SYS_FAN3 PCIEX4 F_AUDIO F_USB2 F_USB1 F_PANEL SPDIF_O Box Contents 5 GA-B85M-D3H motherboard 5 Motherboard driver disk…

• Page 5: Ga-B85M-D3H Motherboard Block Diagram

  GA-B85M-D3H Motherboard Block Diagram PCI Express Bus CPU CLK+/- (100 MHz) LGA1150 DDR3 1600/1333 MHz 1 PCI Express x16 DVI-D Dual Channel Memory HDMI PCIe CLK (100 MHz) Dual BIOS D-Sub 4 SATA 6Gb/s 2 SATA 3Gb/s RJ45 PCIe CLK…

• Page 6: Chapter 1 Hardware Installation

  Chapter 1 Hardware Installation Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user’s manual and follow these procedures: • Prior to installation, make sure the chassis is suitable for the motherboard. •…

• Page 7: 1-2 Product Specifications

  Support for DDR3 1600/1333 MHz memory modules Š Support for non-ECC memory modules Š Support for Extreme Memory Profile (XMP) memory modules Š (Go to GIGABYTE’s website for the latest supported memory speeds and memory modules.) Onboard Integrated Graphics Processor: Š Graphics 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz 1 x DVI-D port, supporting a maximum resolution of 1920×1200@60 Hz * The DVI-D port does not support D-Sub connection by adapter.

• Page 8
  Internal 1 x 24-pin ATX main power connector Š Connectors 1 x 8-pin ATX 12V power connector Š 4 x SATA 6Gb/s connectors Š 2 x SATA 3Gb/s connectors Š 1 x CPU fan header Š 3 x system fan headers Š…

• Page 9: Installing The Cpu And Cpu Cooler

  Š * GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. * Please visit the Support & Downloads\Utility page on GIGABYTE’s website to check the supported operating system(s) for the software listed in the «Unique Features» and «Bundled Software» columns. Installing the CPU and CPU Cooler Read the following guidelines before you begin to install the CPU: •…

• Page 10: Installing An Expansion Card

  Dual Channel Memory Configuration This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual Channel memory mode will double the original memory bandwidth. The four DDR3 memory sockets are divided into two channels and each channel has two memory sockets as following: Channel A: DDR3_2, DDR3_4 Channel B: DDR3_1, DDR3_3 Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

• Page 11
  Triple-Display Configurations for the Onboard Graphics: Triple-display configurations are supported after you install motherboard drivers in OS. Only dual-display configurations are supported during the BIOS Setup or POST process. USB 3.0/2.0 Port The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification. Use this port for USB devices Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. RJ-45 LAN Port The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs.

• Page 12: Internal Connectors

  Internal Connectors ATX_12V_2X4 F_AUDIO SPDIF_O CPU_FAN F_USB30 SYS_FAN1/SYS_FAN2/SYS_FAN3 F_USB1/2 SATA3 0/1/2/3 SATA2 0/1 F_PANEL CLR_CMOS Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices.

• Page 13: Cpu_Fan/Sys_Fan Fan Headers

  1/2) ATX_12V_2X4/ATX (2×4 12V Power Connector and 2×12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed. The power connector possesses a foolproof design. Connect the power supply cable to the power connector in the correct orientation.

• Page 14
  5) BAT (Battery) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. You may clear the CMOS values by removing the battery: 1.

• Page 15: Front Panel Audio Header

  F_PANEL (Front Panel Header) Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. •…

• Page 16
  10) SPDIF_O (S/PDIF Out Header) This header supports digital S/PDIF Out and connects a S/PDIF digital audio cable (provided by expansion cards) for digital audio output from your motherboard to certain expansion cards like graphics cards and sound cards. For example, some graphics cards may require you to use a S/PDIF digital audio cable for digital audio output from your motherboard to your graphics card if you wish to connect an HDMI display to the graphics card and have digital audio output from the HDMI display at the same time.
• Page 17
  13) COM (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer. Pin No. Definition Pin No. Definition NDCD- NDSR- NSIN NRTS- NSOUT NCTS- NDTR- NRI- DEBUG…

• Page 18: Clear Cmos Jumper

  To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on. To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility. Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system.

• Page 19: Startup Screen

  Startup Screen The following startup Logo screen will appear when the computer boots. (Sample BIOS Version: D9) Function Keys On the main menu of the BIOS Setup program, press arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. Or you can use your mouse to select the item you want. •…

• Page 20
  ` M.I.T. Current Status This screen provides information on CPU/memory frequencies/parameters. ` Advanced Frequency Settings & Processor Graphics Clock Allows you to set the onboard graphics clock. The adjustable range is from 400 MHz to 4000 MHz. (Default: Auto) & CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU.
• Page 21
  & Hyper-Threading Technology (Note 1) Allows you to determine whether to enable multi-threading technology when using an Intel CPU that ® supports this function. This feature only works for operating systems that support multi-processor mode. Auto lets the BIOS automatically configure this setting. (Default: Auto) & CPU Enhanced Halt (C1E) (Note 1) Enables or disables Intel CPU Enhanced Halt (C1E) function, a CPU power-saving function in system…
• Page 22
  ` Advanced Memory Settings & Extreme Memory Profile (X.M.P.) , System Memory Multiplier, Memory Frequency(MHz) (Note) The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu. & Performance Enhance Allows the system to operate at three different performance levels. Lets the system operate at its basic performance level. Normal Lets the system operate at its good performance level.

• Page 23: Pc Health Status

  ` PC Health Status & Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. (Default) Disabled Clears the record of previous chassis intrusion status and the Case Open field will show Enabled «No» at next boot. & Case Open Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show «Yes», otherwise it will show «No».

• Page 24: System

  Allows you to control the fan speed under the Slope PWM item. Manual Allows the fan to run at full speeds. Disabled & Slope PWM Allows you to control the fan speed. This item is configurable only when 2nd/3rd System Fan Speed Control is set to Manual. Options are: 0.75 PWM value / C ~ 2.50 PWM value / ` Miscellaneous Settings &…

• Page 25: 2-4 Bios Features

  & Access Level Displays the current access level depending on the type of password protection used. (If no password is set, the default will display as Administrator.) The Administrator level allows you to make changes to all BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all. 2-4 BIOS Features &…

• Page 26: Fast Boot

  & Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the GIGABYTE Logo when the system starts up. (Default: Enabled) & Fast Boot Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup speed.

• Page 27: Boot Mode Selection

  & OS Type Allows you to select the operating system to be installed. Set this item to Windows 8 for Windows 8 operating system. (Default: Other OS) & CSM Support Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process. Enables UEFI CSM.

• Page 28: Peripherals

  & Administrator Password Allows you to configure an administrator password. Press <Enter> on this item, type the password, and then press <Enter>. You will be requested to confirm the password. Type the password again and press <Enter>. You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. Differing from the user password, the administrator password allows you to make changes to all BIOS settings. &…

• Page 29: Audio Controller

  BIOS routes the sharable ports to EHCI controller. Then it uses ACPI protocols to Auto provide an option to enable the xHCI controller and reroute the sharable ports. Note: This is the recommended mode when BIOS does NOT have xHCI pre-boot support. All shared ports are eventually routed to the xHCI controller during the BIOS boot process.

• Page 30: Hot Plug

  ` SATA Configuration & SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) & SATA Mode Selection Enables or disables RAID for the SATA controllers integrated in the Intel B85 Chipset or configures the ® SATA controllers to AHCI mode. IDE Configures the SATA controller to IDE mode. AHCI C onfigures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug.

• Page 31: Power Management

  Power Management & Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specific time on each day or on a specific day in a month. Wake up hour/minute/second: Set the time at which the system will be powered on automatically. Note: When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective.

• Page 32: Save & Exit

  & Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Disables this function. (Default) Disabled Set a password with 1~5 characters to turn on the system. Password Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.

• Page 33: Chapter 3 Drivers Installation

  & Load Optimized Defaults Press <Enter> on this item and select Yes to load the optimal BIOS default settings. The BIOS defaults settings help the system to operate in optimum state. Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values. &…

• Page 34: Regulatory Statements

  «end of life» product. Restriction of Hazardous Substances (RoHS) Directive Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals.

• Page 35
  — 35 -…

• Page 36: Contact Us

  Tech. and Non-Tech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www.gigabyte.com WEB address (Chinese): http://www.gigabyte.tw You may go to the GIGABYTE website, select your language in the language list on the top right corner of the website. GIGABYTE Global Service System •…

Главная

Память

Процессор

Внутренние порты

Прочие свойства

Порты на задней панели

Свойства

Контроллеры хранения данных

Графический адаптер

Особые свойства процессора

Слоты расширения

Вес и размеры

Содержимое упаковки

Сеть

BIOS