Эхолот гармин страйкер плюс 4 св инструкция по эксплуатации

1. Manuals
2. Brands
3. Garmin Manuals
4. Marine Equipment
5. STRIKER PLUS 4
6. Owner’s manual

• Page 1
  STRIKER™ PLUS 4/5/7/9 Owner’s Manual…

• Page 2: Table Of Contents

  Sonar Appearance Settings ……….. 6 Sharing and Managing User Data ……. 12 Sonar Noise Rejection Settings ……….6 Connecting to a Garmin Device to Share User Data ….12 Overlay Number Settings …………6 User Data Sharing Cable Wiring Diagram ……12 Garmin Quickdraw Contours Mapping……

• Page 3: Introduction

  • To customize the data shown on the screen, select screens. Overlay Numbers. • To turn on and off the compass tape data bar, select Zooming on the STRIKER Plus 4 Compass Tape. You can zoom in and out of the map. Select when you are done customizing.

• Page 4: Customizing A Combination

  Setting the Beeper connections page and connect to the Garmin device, using You can set when the device makes sounds. the name and password you entered in the Garmin device. Select Settings > System > Beeper. Receiving Smart Notifications Select an option: With the ActiveCaptain app, the STRIKER Plus device can show •…

• Page 5: Updating Software With The Activecaptain App

  Garmin ClearVü Sonar View updates for your device. NOTICE NOTE: To receive Garmin ClearVü scanning sonar, you need a Software updates may require the app to download large files. compatible transducer. Regular data limits or charges from your Internet service Garmin ClearVü…

• Page 6: Split-Screen Frequency

  Left side of the vessel Right side of the vessel The transducer on your vessel Zoomed depth scale Trees Zoom window Old tires Depth range Logs Distance from the side of the vessel Water between the vessel and the bottom Selecting the Transducer Type If you are connecting a transducer that was not included with the Split-Screen Frequency…

• Page 7: Selecting Frequencies

  Setting the Gain Automatically Viewing two frequencies concurrently using the split-frequency view allows you to see deeper with the lower frequency return NOTE: To set the gain on the split-frequency screen, you must and, at the same time, see more detail from the higher set each frequency separately.

• Page 8: Setting The Bottom Search Limit

  > Sonar Setup > Noise Reject. aspect ratio and appear less distorted. When viewing Interference: Adjusts the sensitivity to reduce the effects of Garmin ClearVü or SideVü sonar views, it is recommend interference from nearby sources of noise. to use the Auto setting.

• Page 9: Garmin Quickdraw Contours Mapping

  (Connecting to the Garmin Quickdraw Community with ActiveCaptain, page WARNING NOTE: The Garmin device must have a memory card slot or The Garmin Quickdraw Contours mapping feature allows users Wi‑Fi technology to participate in the Garmin Quickdraw to generate maps. Garmin makes no representations about the Community.

• Page 10: Garmin Quickdraw Contours Settings

  The 50 nearest destinations that contain your search criteria errors in recorded maps. appear. Survey Coloring: Sets the color of the Garmin Quickdraw Select the destination. Contours display. When this setting is turned on, the colors indicate the quality of the recording. When this setting is Creating a Waypoint on the Map turned off, the contour areas use standard map colors.

• Page 11: Marking And Navigating To A Man Overboard Location

  Select an option: If necessary, repeat step 3 to add more turns. • To create the waypoint by entering position coordinates, Select the final destination. select Enter Coordinates, and enter the coordinates. Viewing a List of Routes • To create the waypoint using a chart, select Use Chart, Select User Data >…

• Page 12: Deleting A Saved Route

  A magenta line appears. In the center of the magenta line is • To navigate the track from the starting point used when a thinner purple line that represents the corrected course the track was created, select Forward. from your present location to the destination. The corrected •…

• Page 13: System Information

  Select Settings > My Vessel > Keel Offset. and the software version. Select if the transducer is installed at the water line, or Garmin Devices: Provides information about connected Garmin select if the transducer is installed at the bottom of the devices.

• Page 14: Unit Settings

  You can connect the STRIKER Plus device to a compatible Fish: Sets an alarm to sound when the device detects a Garmin device to share user data, such as waypoints. If the suspended target. devices are mounted near each other, you can connect the blue •…

• Page 15: Appendix

  Appendix longer than a few weeks or months, the device may not be able to acquire the satellites correctly. • Ensure the device is using the latest software. If not, update Registering Your Device with the Serial the device software (Updating Software with the Number ActiveCaptain App, page…

• Page 16: Index

  5 gain 5 factory settings 11, 12 Garmin ClearVü 3 interference 6 SideVü 3 Garmin ClearVü 3 surface noise 6 To 8 suspended targets 6 GPS 13 views 3–5 settings 10 waypoint 5 signals 1 zoom 4, 5 accuracy 11 SOS 9 home screen, customizing 1…

инструкцияGarmin Striker Plus 4cv

Printing a Mounting Template

NOTICE

It is not recommended that you print a mounting template on your own. Use the template that came in the product box.

If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates,

you need large enough paper and printer. Failure to have the correct sized paper and printer, or a failure to follow these instructions,

may result in an incorrectly sized template and therefore an incorrect cutout (too large or too small) on the mounting surface of your

boat.

1

Select File > Print.

➋

➌

➍

➎

➊

2

Select None for Page Scaling ➊.

3

Ensure the check mark is next to Auto-Rotate and Center ➋.

4

Drag the arrow ➌ to the right, to view page 2 in the window below.

4

Verify that the paper size is larger than the template ➍.

In this example, the paper is not larger than the template.

5

If the paper size is not large enough, select Properties ➎ and select a Page Size that is larger than the template.

NOTICE

Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow

these instructions.

Посмотреть инструкция для Garmin Striker Plus 4cv бесплатно. Руководство относится к категории без категории, 3 человек(а) дали ему среднюю оценку 8.8. Руководство доступно на следующих языках: английский. У вас есть вопрос о Garmin Striker Plus 4cv или вам нужна помощь? Задайте свой вопрос здесь

Главная

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Garmin Striker Plus 4cv.

Не нашли свой вопрос? Задайте свой вопрос здесь