Axis 240q video server инструкция на русском

Axis 240Q User Manual

  • Contents

  • Table of Contents

  • Troubleshooting

  • Bookmarks

Quick Links

AXIS 240Q Video Server

User’s Manual

loading

Related Manuals for Axis 240Q

Summary of Contents for Axis 240Q

  • Page 1
    AXIS 240Q Video Server User’s Manual…
  • Page 2
    Safety Notice — Battery Replacement with the instructions, may cause harmful interference to radio The AXIS 240Q uses a 3.0V CR2032 Lithium battery as the power communications. However, there is no guarantee that supply for its internal real-time clock (RTC). This battery will, interference will not occur in a particular installation.

  • Page 3: Table Of Contents

    The AXIS Media Control (AMC) ……..

  • Page 4
    AXIS 240Q Network — Advanced TCP/IP Settings ……..40 SOCKS .

  • Page 5: Product Description

    HTTPS, IP address filtering and multiple user levels with passwords. The AXIS 240Q has a built-in web server, providing full access to all features through the use of a standard browser. The built-in scripting tool allows the creation of basic applications, providing basic surveillance solutions.

  • Page 6: Axis 240Q Front Panel

    DIP switches set in the down position. Note: If the AXIS 240Q is to be connected in parallel with other equipment, disable the input termination by turning the corresponding DIP switch to the up position (OFF). Failure to do so may impair the image qual- ity.

  • Page 7: Axis 240Q Rear Panel

    The I/O Terminal connector also provides an auxiliary connection point for DC power. Network Connector — The AXIS 240Q connects to the network via a standard network cable. The AXIS 240Q detects the speed of the local network segment (10BaseT/100BaseTX Ethernet).

  • Page 8: Using The Video Server

    AXIS 240Q — Using the video server Using the video server The AXIS 240Q can be used with most standard operating systems and web browsers. The recommended browser is Internet Explorer with Windows, and Mozilla with other operating systems. See also the Technical specifications, on page 67.

  • Page 9: The Live View Page

    •To view streaming video in Microsoft Internet Explorer, you must set your web browser to allow the AXIS Media Control (AMC) to be installed on your computer. AMC is required to use audio in the AXIS 241SA, AXIS 241QA and AXIS 243SA. AMC also provides an MPEG-4 decoder for viewing MPEG-4 video streams.

  • Page 10: Video Streams

    For information on using Pan/Tilt/Zoom controls, please see page 27. Video Streams The Live View page in the AXIS 240Q provides access to Motion JPEG video streams, as well as to single JPEG images. Other applications and clients can also access these video streams/images directly, without going via the Live View page.

  • Page 11: The Axis Media Control (Amc)

    Video and images from the AXIS 240Q can also be accessed in the following ways: • If supported by the client, the AXIS 240Q can use Motion JPEG server push to display video. This option maintains an open HTTP connection to the browser and sends data as and when required, for as long as required.

  • Page 12: Configuring The Video Server

    Accessing the Setup tools Follow the instructions below to access the Setup Tools from a browser. 1. Start the browser and enter the IP address or host name of the AXIS 240Q in the location/address field. 2. The Live View page is now displayed. Click Setup to display the Setup tools.

  • Page 13: Video & Image Settings

    AXIS 240Q — Video & Image Settings Video & Image Settings The following descriptions show examples of the available features in the AXIS 240Q. For details about each setting, please refer to the online help available from each page. Click to access the online help.

  • Page 14: Video Source Settings

    AXIS 240Q — Video & Image Settings Text Overlay Settings Include date, time and/or text of your choice to be viewed on the image. The color of the text may be set to white or black, while background color may be set to white, black, transparent or semitransparent.

  • Page 15: Overlay/Mask Settings

    Selecting the overlay/mask type from the menu will display further settings available for the selected type. See the online help for further information. Note: A privacy mask cannot be bypassed, but an overlay image can be bypassed with the help of the AXIS VAPIX API. Upload and use an overlay image 1.

  • Page 16
    Windows 4-bit BMP (16 colors) Overlay image limitations: • The maximum overlay image size supported by the AXIS 240Q is the same as the max- imum image resolution. See Technical Specifications, on page 54. • When a text overlay is also used, this reduces the amount of space available to the overlay image.
  • Page 17
    AXIS 240Q — Video & Image Settings Use a Privacy Mask To use privacy masks to hide different areas of the video image: 1. Select Configurable areas as privacy mask in the drop-down list for Overlay/Mask Type. New options appear.

  • Page 18: Live View Config

    These are the tools for deciding the layout of the Live View page. The layout can be set in 3 ways: • Use Axis look — the layout is unchanged. • Use custom settings — modify the default page with your own colors, images etc.

  • Page 19
    Note that the setup address is http://<ip address>/operator/basic.shtml Upload Own Web Files Your own web files, background pictures, etc. must first be uploaded to the AXIS 240Q in order to be available for selection in the Custom Settings setup dialog. Once uploaded, the files are shown in the drop-down list.
  • Page 20
    Output Buttons These buttons are used to control the outputs on the AXIS 240Q and thus the equipment connected to them, e.g. to switch a light on or off: • The Pulse button activates the port for a defined period •…

  • Page 21: Html Examples

    PTZ Control Panel, but will default to joystick if this is selected. HTML Examples You can add live video from your AXIS 240Q to your own web site. The video server can send Motion-JPEG images to up to 20 simultaneous connections, although an administrator can restrict this to fewer.

  • Page 22: Event Configuration

    Event Servers are used for e.g. receiving uploaded image files and/or notification messages. To set up Event server for your AXIS 240Q, go to Setup > Event Configuration > Event Servers and enter the required information according to the selected server type.

  • Page 23: Event Types

    AXIS 240Q — Event Configuration Event Types An Event Type is a set of parameters describing how and when the video server is to perform certain actions. Example: If somebody walks past the connected camera, and an event has been configured to act on this, the video server can e.g.

  • Page 24
    Note: If the pre- or post-buffer is too large for the internal memory in the AXIS 240Q, the frame rate will be reduced and individual images may be missing. If this occurs, an entry will be created in the unit’s log file.

  • Page 25: Motion Detection

    AXIS 240Q — Event Configuration 7. Click OK to save the Event in the Event Types list. Please see the online help for descriptions of each available option. Motion Detection In the Motion Detection menu, you can configure the video source(s) for motion detection.

  • Page 26: Port Status

    Port Status Under Event Configuration > Port Status, there is a list that shows the status for the connected inputs and outputs of the AXIS 240Q. This is for the benefit of an operator, who cannot access the System Options section.

  • Page 27: Pan Tilt Zoom

    AXIS 240Q — Pan Tilt Zoom Pan Tilt Zoom Installing PTZ Devices The AXIS 240Q supports several PTZ devices. Please see www.axis.com for a complete list of supported devices, and to obtain the correct driver. Follow the instructions below to install a PTZ device: 1.

  • Page 28: Ptz Configuration

    HTTP specification for generic control of PTZ devices using CGI commands or a TCP/IP client. Please refer to the Axis Website at www.axis.com for further information. PTZ Configuration Once PTZ has been installed for the AXIS 240Q, PTZ Configuration now appears in the menu to the left along with the following submenus. Preset Positions A preset position is a pre-defined camera view than can be used to quickly move the camera to a specific location.

  • Page 29: Ptz Controls

    AXIS 240Q — Pan Tilt Zoom PTZ Controls If the AXIS 240Q has been appropriately configured, the Live View page will display the controls available for the installed Pan Tilt Zoom (PTZ) device. The administrator can enable/disable the controls for specified users.

  • Page 30
    There are also driver specific shortcuts that can appear in the Control Panel. In the screen to the right, a driver has been installed that brings up the Wiper shortcut button, which allows the user to configure and use a windshield wiping action with the AXIS 240Q.

  • Page 31: Guard Tour

    PTZ driver and are displayed in the PTZ Panel. Limits — Define the pan, tilt, zoom and focus limits for the AXIS 240Q. Movements to the left and right, up and down can be restricted to narrow the area under surveillance. The…

  • Page 32
    Use the PTZ Control Queue window to enable and disable PTZ queueing. This window allows you to set up a queue for viewers wanting to access the AXIS 240Q, and limits the number of viewers and the length of time each viewer can access and control PTZ. For more information on how to set up the control queue, please see the online help.
  • Page 33
    PTZ control command. 2. Event — You can set up the AXIS 240Q to take control of the queue and move to a specific position for 20 seconds when triggered by an alarm. The event will immediately be place first in queue except when an administrator is in control.

  • Page 34: System Options

    Referrals — to prevent unauthorized sources from including the video stream from the AXIS 240Q into external Web pages, check the Referrals box and enter the IP address or Host name of the computer that hosts the Web pages with the included video stream.

  • Page 35: 802.1X — Network Admission Control

    Protocol over SSL (Secure Socket Layer)). That is, all communication that would otherwise go via HTTP instead goes via an encrypted HTTPS connection. Certificate — to use HTTPS for communication with the AXIS 240Q, a Certificate must be created using one of these methods: •…

  • Page 36
    The one used in the Axis implementation is EAP-TLS (EAP-Transport Layer Security). The AXIS network video device presents its certificate to the network switch, which in turn forwards this to the RADIUS server. The RADIUS server validates or rejects the certificate and responds to the switch, and sends its own certificate to the client for validation.
  • Page 37
    Protected network 1. A CA server provides the required signed certificates. 2. The Axis video device requests access to the protected network at the network switch. The switch forwards the video device’s CA certificate to the RADIUS server, which then replies to the switch.

  • Page 38: Date & Time

    IP address change (under Services) to receive notification from the video server when the IP address changes. •Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 240Q by host name which is always the same, regardless of the IP address.

  • Page 39: Axis 240Q

    • Pinging the unit will still be possible when this service is disabled. AXIS Internet Dynamic DNS Service — If the AXIS 240Q has been registered with the Axis Internet Dynamic DNS service and the IP address for the product changes, the service is updated to reflect the change.

  • Page 40: Network — Advanced Tcp/Ip Settings

    Use the following DNS server address — enter the desired DNS server by specifying the following: Domain name — enter the domain(s) to search for the host name used by the AXIS 240Q. Multiple domains can be separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name, e.g.

  • Page 41: Socks

    Use NAT traversal when your video server is located on an intranet and you want to make it available from the other side of a NAT router. The FTP server running in the AXIS 240Q enables the upload of e.g. new firmware, user applications, etc. Check the box to enable the service.

  • Page 42: Smtp (Email)

    AXIS 240Q — System Options The QoS in Axis network video products marks the data packets for various types of network traffic originating from the product. This makes it possible for network routers and switches to e.g. reserve a fixed amount of bandwidth for these types of traffic. The following types of traffic are marked: •…

  • Page 43: Network — Upnp

    For more information, please see COM Ports RS-232 and RS-485, on page 49. RS485 — The COM ports on the AXIS 240Q supports several operational modes listed on this page. For more information, please see COM Ports RS-232 and RS-485, on page 49.

  • Page 44: Support

    The System Overview provides a summary of the status of the video server. Logs & Reports — when contacting Axis support, please be sure to provide a valid Server Report with your query. Information — The Log report and the Parameter List also provide valuable information for troubleshooting and when contacting Axis support service.

  • Page 45: Advanced

    For more information, please visit the Developer pages at www.axis.com/developer Plain Config — this function is for the advanced user with experience of Axis video server configuration. All parameters can be set and modified from this page. Help is…

  • Page 46: Resetting To The Factory Default Settings

    AXIS 240Q — System Options Resetting to the Factory Default Settings To reset the AXIS 240Q to the original default settings, go to the System Options > Maintenance web page (as described in Maintenance, on page 43), or use the control…

  • Page 47: Unit Connectors

    COM Ports RS-232 and RS-485, on page 49 The D-Sub Connector The AXIS 240Q provides one 9-pin D-sub connector, providing the physical interface for an RS-232 port, used for connecting accessory equipment, such as PTZ devices for the remote control of connected video cameras.

  • Page 48: The I/O Terminal Connector

    A half-duplex RS-485 interface for controlling auxiliary equipment, e g. PTZ devices. RS-485 — B (inverting) The AXIS 240Q includes one (green) 12-pin terminal block. Connect input/output devices to this block: 1. Loosen the corresponding screw on top of the pin (see the table above to determine which pin to use).

  • Page 49: Schematic Diagram — I/O Terminal Connector

    HTTP • Pan Tilt Zoom (PTZ) — for controlling a PTZ device. A PTZ device requires a driver for its function. Please see page 27 for information on how to connect PTZ devices. Drivers can be obtained from www.axis.com…

  • Page 50: Troubleshooting

    Note: Pre-configured and customized settings will be retained for use when the new firmware is running (pro- vided the features are available in the new firmware) although this is not guaranteed by Axis Communica- tions. 1. Save the firmware file to your computer. The latest version of the AXIS 240Q firmware is available free of charge from the Axis Web site at www.axis.com/techsup or from your local distributor.

  • Page 51: Support

    2. If the unit does not reply within a few seconds, restart it and wait for a reply. Press CTRL+C to stop Ping. 3. Open a browser and type in the AXIS 240Q’s IP address. In the page that appears, use the Browse button to select the upgrade file to use, e.g. axis240q.bin. Then click the Load button to restart the upgrade process.

  • Page 52
    The AXIS 240Q cannot be accessed from a Web browser The IP address has been changed 1) Move the AXIS 240Q to an isolated network or to one with no DHCP or BOOTP server. Set the by DHCP IP address again, using the ARP Ping command.
  • Page 53
    Incorrect exposure in images Incorrect line termination If the AXIS 240Q is to be connected in loop through with other equipment, disable the input termination by turning the corresponding DIP switch to OFF. For additional assistance, please contact your reseller or check the product’s support pages…

  • Page 54: Technical Specifications

    • IP address filtering. • HTTPS (SSL/TLS) encryption. Users • 20 simultaneous users Pan/Tilt/Zoom • PTZ support for remote camera control. Please see www.axis.com for information about supported devices. Terminal connector — I/O • 4 digital alarm inputs ports and connections •…

  • Page 55
    • Weight: 1.2 lb. (0.54 kg) power adapter not included Complimentary Software • AXIS Media Control (AMC) — ActiveX component software required for Microsoft Internet Explorer — installed automatically on first use. • Optional: AXIS IP Utility — For Windows installation.

  • Page 56: General Performance Considerations

    To see the bandwidth and frame rate currently required by the video stream, the AXIS 240Q provides a tool that can be used to display these values directly in the video image. To do this, special format strings are added as part of a text overlay.

  • Page 57: Frame Rates — Motion Jpeg

    AXIS 240Q — Technical Specifications Frame rates — Motion JPEG The AXIS 240Q has a frame rate of up to 6/5 fps per channel for all resolutions. Bandwidth As there are many factors affecting bandwidth, it is very difficult to predict the required amounts.

  • Page 58: Glossary

    AMC (AXIS Media Control) — AMC is the ActiveX AXIS IP Utility — A tool for discovering and setting IP component required to view moving images from an Axis addresses for Axis network devices. AXIS IP Utility is video device in Internet Explorer.

  • Page 59
    AXIS 240Q — Glossary CCD (Charged Coupled Device) — This light-sensitive format. A codec uses analog-to-digital conversion and image device used in many digital cameras is a large digital-to-analog conversion in the same chip. integrated circuit that contains hundreds of thousands of…
  • Page 60
    10 Mbps and 100 Mbps respectively. modulation (PCM) scheme operating at 8 kHz sample rate. ETRAX (Ethernet Token Ring AXIS) — The ETRAX chip is G.726 — A frequently used speech-compression algorithm the cornerstone of Axis technology and the ‘brain’ in in telecommunications due to its high perceived speech nearly all Axis products.
  • Page 61
    AXIS 240Q — Glossary type of images (I-VOP’s or P-VOP’s) included in the connection between the communication end-points, stream, and their internal order. See also GOV and VOP. packets can be sent via different routes and do not need to arrive at the destination in the correct order.
  • Page 62
    AXIS 240Q — Glossary JPEG (Joint Photographic Experts Group) — Together MPEG-2 — The designation for a group of audio and video with the GIF file format, JPEG is an image file type coding standards, and is typically used to encode audio commonly used on the web.
  • Page 63
    Pixel (Picture Element) — A pixel is one of the many tiny along its vertical axis, and zooming is the adjustment of dots that make up a digital image. The color and intensity the zoom lens to magnify the view.
  • Page 64
    AXIS 240Q — Glossary RS-232 — A long-established standard that describes the protect people, property and assets. Such systems are physical interface and protocol for low-speed serial data therefore an especially attractive option for companies communication between devices. This is the interface that currently using CCTV.
  • Page 65
    AXIS 240Q — Glossary identity of the server. Control Protocol (TCP). The advantage of UDP is that it is not required to deliver all data and may drop network Subnet & subnet mask — A subnet is an identifiably packets when there is e.g. network congestion. This is separate part of an organization’s network.
  • Page 66
    AXIS 240Q — Glossary VPN (Virtual Private Network) — This creates a secure «tunnel» between the points within the VPN. Only devices with the correct «key» will be able to work within the VPN. The VPN network can be within a company LAN (Local Area Network), but different sites can also be connected over the Internet in a secure way.

  • Page 67: Index

    Frame rates 14, 57 AMC 10 FTP server 22 Anonymous viewing 34 ARP/Ping 39 Auxiliary power 48 Generic HTTP 49 AXIS Internet Dynamic DNS Service 39 Generic TCP/IP 49 Backup 44 Host name 40 Bandwidth 57 HTML examples 21 Buffers 24…

  • Page 68
    AXIS 240Q — Index Security 34 Network settings 38 Sequence mode 9, 21 NTP server 38 Serial number 7 Snapshot button 10 Source list 9 Support 44 Operators 34 System options 34 Output buttons 9, 20 Own home page 19…

Источник
  1. Инструкции и руководства
  2. Бренды
  3. Axis
  4. 240Q 4-Port Video Server
  5. Справочник Пользователя

Axis

AXIS 240Q Video Server

User’s Manual

Источник

  • Page 1: Axis Axis Video Server AXIS 240Q

    AXIS 240Q Video Server User’s Manual[…]

  • Page 2: Axis Axis Video Server AXIS 240Q

    AXIS COMMUNICATIONS <Product Name> Qui ck User’s Guide About This Document This manual is in tended for admin istrators and users of th e AXIS 240Q Video Server, and is applicable for firmware release 4.30. It includes instructions for using and managing the AXIS 240Q on your network. Previous experience of networking will be of use wh en i[…]

  • Page 3: Axis Axis Video Server AXIS 240Q

    3 AXIS 240Q Table of contents Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 AXIS 240Q Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 AXIS 240Q Rear Panel . . . . . . . . . . . . . . . .[…]

  • Page 4: Axis Axis Video Server AXIS 240Q

    4 AXIS 240Q Security — HTTPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Network — Basic TCP/IP Settings . . . . . . . . . . . . . . . . . . . . . . . . .[…]

  • Page 5: Axis Axis Video Server AXIS 240Q

    5 AXIS 240Q — Product Description Product Description The AXIS 240Q is a fully featured video se rver for security surveillance and remote monitoring needs. Based on the AXIS ARTPEC-2 compression chip, it can digitize up to 4 analog video sources and make these availabl e on the network as real-time Motion JPEG video streams, at a maximum frame rat[…]

  • Page 6: Axis Axis Video Server AXIS 240Q

    6 AXIS 240Q — Product Description AXIS 240Q Front Panel Indicators — After completion of the startup and self-test routines, the multi-colored Network, Status, Power Indicators flash as follows: Unlit No connection. Green Steady for connection to a 100 Mbit/s network. Flas hes for network ac tivity . Amber Steady for connection to a 10 Mbit /s netw[…]

  • Page 7: Axis Axis Video Server AXIS 240Q

    7 AXIS 240Q — Product Description AXIS 240Q Rear Panel The Serial Number is located on the label on the underside of the unit. Power adapter connector — A single socket for connectio n of the PS-K power adapter. I/O Terminal connector — The I/O Terminal co nnector provides the phys ical interface to 4 digital transistor outputs, 4 digital inputs an[…]

  • Page 8: Axis Axis Video Server AXIS 240Q

    8 AXIS 240Q — Using the video server Using the video server Installation Before the AXIS 240Q can be acce ssed it must be installed on your network. Please see the installation guide supplied with the pr oduct. Alternatively, download it from www.axis.com Accessing the video server The AXIS 240Q can be used with most standard operating systems and […]

  • Page 9: Axis Axis Video Server AXIS 240Q

    9 AXIS 240Q — Using the video server Notes: •To view streaming video in Microsoft Internet Explorer, you must set your browser to allow ActiveX controls and allow AMC (A XIS Media Control) to be installed on your workstation. If your workstation restricts the use of additio na l software components, the AXIS 240Q ca n be configured to use a Java […]

  • Page 10: Axis Axis Video Server AXIS 240Q

    10 AXIS 240Q — Video Streams Note that these AMC toolbar functions can also be accessed by right-c licking in the image. For information on using Pan/Tilt/Zoom controls, please see page 28. Video Streams The Live View page in the AXIS 240Q provides access to Motion JPEG video streams, as well as to single JPEG images. Other applicat ions and client[…]

  • Page 11: Axis Axis Video Server AXIS 240Q

    11 AXIS 240Q — Video Streams Other methods of acce ssing the video stream Video and images from the AXIS 240Q can al so be accessed in the following ways: • If supported by the client, the AXIS 240Q can use Motion JPEG server push to display video. This option maintains an open HTTP co nnection to the browser and sends data as and when required, […]

  • Page 12: Axis Axis Video Server AXIS 240Q

    12 AXIS 240Q — Configuring the vide o server Configuring the video server This section describes how to configur e the AXIS 240Q and is intended for: • administra tors , who have unrestricted access to all the Setup tools • operators , who have access to the Video & Image, Live View Config and Event Config — uration settings. The AXIS 240Q […]

  • Page 13: Axis Axis Video Server AXIS 240Q

    13 AXIS 240Q — Configurin g the video server Video & Image Video 1 Video 2 Video 3 Video 4 Image Make basic image settings ; resoluti on, comp ression, color settings, rotate image, etc. Place an overlay image in the video image. Set limits on the video stream time and the frame rate. Video Source Settings to modify the horizontal and vertic al[…]

  • Page 14: Axis Axis Video Server AXIS 240Q

    14 AXIS 240Q — Configuring the vide o server System Options Security Users Access to the video server can be restricted to defined users only (maximum of 20). The administrator has unrestricte d access to the Setu p tools and dete rmines rights for users at 3 levels; Administrator, Operator, Viewer. IP Address Filter Once enabled, only the IP addre[…]

  • Page 15: Axis Axis Video Server AXIS 240Q

    15 AXIS 240Q — Video & Image Settings Video & Image Settings The following descriptions show examples of the available features in the AXIS 240Q. For details about each setting, pl ease refer to the online help available from each page. Click to access the online help. Image Settings Image Appearance Modify the Image Appearance to optimize […]

  • Page 16: Axis Axis Video Server AXIS 240Q

    16 AXIS 240Q — Video & Image Settings Text Overlay Settings Include date, time and/or text of your choice to be viewed on the image. The color of the text may be set to white or black, while ba ckground color may be set to white, black, transparent or semitransparent. The position of the text is set either to the top or the bottom of the image.[…]

  • Page 17: Axis Axis Video Server AXIS 240Q

    17 AXIS 240Q — Video & Image Settings Quad Stream Settings The settings are the same as the individual image settings and are active only when the quad stream view is selected, see Image Settings , on page 15 . Overlay/Mask Settings Overlay text Overlay image Overlay/ Mask Type Overlay/Mask Type allows you to place an overlay , or up to three p[…]

  • Page 18: Axis Axis Video Server AXIS 240Q

    18 AXIS 240Q — Video & Image Settings Overlay image re quirements: Overlay image limitations : • The maximum overlay image size supported by the AXIS 240Q is the same as the max — imum image resolution. See T echnical Specifications, on page 5 1 . • When a text overlay is also used, this re duces the amount of space available to the overlay[…]

  • Page 19: Axis Axis Video Server AXIS 240Q

    19 AXIS 240Q — Live View Config Live View Config Layout These are the tools for deciding the layout of the Live View page. The layout can be set in 3 ways: • Use Axis look — the layout is unchanged. • Use custom se ttin gs — modify the default page with your own colors, images etc. Click the Configure but — ton and see the following page. • O[…]

  • Page 20: Axis Axis Video Server AXIS 240Q

    20 AXIS 240Q — Live View Config Upload Own Web Fi les Your own web files, background picture, color etc. must first be uploaded to the AXI S 240Q in order to be available for selection in the Custom Settings setup dialog. Once uploaded, the files are shown in the drop-down list. 1. Enter the pat h to th e file, to e.g. a file located on your workst[…]

  • Page 21: Axis Axis Video Server AXIS 240Q

    21 AXIS 240Q — Live View Config 6. Ente r th e cgi link : http://192.168.0.125/axis-cgi/com/ptz.cgi ?camera=1&continuo uspantiltmove=0,0 7. These links will appear in the web interfac e and can be used to control the PTZ camera For more information on the Axis HTTP API, see the Support / Develope r pages on the Axis Web site at http://w ww.axis[…]

  • Page 22: Axis Axis Video Server AXIS 240Q

    22 AXIS 240Q — Live View Config External Video You can add links to other Axis network devi ces available over the ne twork. Thes e sources can be displayed on the Live View page, just as if they were video sourc es connected directly to the AXIS 240Q. Click the Add button to open the External Video Sour ce Setup dialog, which is used to make all t[…]

  • Page 23: Axis Axis Video Server AXIS 240Q

    23 AXIS 240Q — Event Configuration Event Configuration This section describes how to configure the AXIS 240Q fo r alarm handling. Various actions can be configured to ru n when ce rtain types of events occur. A set of parameters describing how and when th e video server is to perform certain actions — the circumstances that start an event e.g. at a[…]

  • Page 24: Axis Axis Video Server AXIS 240Q

    24 AXIS 240Q — Event Con figuration Event Types An Event Type is a set of parameters describing how and when the video server is to perform certain actions. Example: If somebody walks past the connected camera , and an event has been configured to act on this, the video server can e.g. record and send video images to an FTP server, or send a notifi[…]

  • Page 25: Axis Axis Video Server AXIS 240Q

    25 AXIS 240Q — Event Configuration Pre-trigger and Post-trigger buffers This function is very useful when checking to see what happened immediately before and after a trigger, e.g. 2 minutes before and after a door was opened. Check the Up load images checkbox under Event Types > Add Triggered… > Triggered by… to ex pand the web page with[…]

  • Page 26: Axis Axis Video Server AXIS 240Q

    26 AXIS 240Q — Event Con figuration 7. Click OK to save the Event in the Event Types list. Please see the online help for descriptions of each available option. Motion Detection In the Motion Detection menu, you can configur e the video source(s) for motion detection. The motion detection feat ure is used to gene rate an alarm whenever movement occ[…]

  • Page 27: Axis Axis Video Server AXIS 240Q

    27 AXIS 240Q — Event Configuration 6. A djust the size (drag the bottom right-ha nd corner) and position (click on the text at the top and drag to the desired position). 7. A djust the Object size, History and Sensit ivity profile sliders (see table below for details). Any detected motion within an active window is th en indicated by red peaks in t[…]

  • Page 28: Axis Axis Video Server AXIS 240Q

    28 AXIS 240Q — Pan Tilt Zoom Pan Tilt Zoom Installing PTZ Devices The AXIS 240Q supports several PTZ devices. Pl ease see www.axis.com for a complete list of supported devices, and to obt ain the correct driver. Follow the instructions below to install a PTZ device: 1. Using an appropriate cable, connect th e device to your selected port (RS-232 or[…]

  • Page 29: Axis Axis Video Server AXIS 240Q

    29 AXIS 240Q — Pan Tilt Zoom Note: Advanced users and application developers can also use the Axis Application Programming Interface and HTTP specification for generi c control of PTZ devices us ing CGI commands or a TCP/IP client. Please refer to the Axis Website at www.axis .com for further information. PTZ Configuration Once PTZ has been inst al[…]

  • Page 30: Axis Axis Video Server AXIS 240Q

    30 AXIS 240Q — Pan Tilt Zoom PTZ Controls If the AXIS 240Q has been appropriately conf igured, the Live View page will display the controls available for the installed Pan Tilt Zoom (PTZ) device. The administrator can enable/disable the controls for specified users. Video sources Preset positions Tilt bar (relative) The exact controls shown depends[…]

  • Page 31: Axis Axis Video Server AXIS 240Q

    31 AXIS 240Q — Pan Tilt Zoom In contrast, when using an absolute driver, each position on the bar (see ri ght) represents a defined position in the device’s range of movement, with the center of the bar represen ting the point midway between the tw o extremes of movement. Clicking a position directly on the bar moves the camera directly to th e n[…]

  • Page 32: Axis Axis Video Server AXIS 240Q

    32 AXIS 240Q — Pan Tilt Zoom Preset Positions Also available with many PTZ devices are Preset positions . These pre sets are selected from the drop-down Source list on the Live View page and will move and/or zoom the camera to a pre-defined position, i.e. to cover an area of particular interest. Events can also be configured to go to preset positio[…]

  • Page 33: Axis Axis Video Server AXIS 240Q

    33 AXIS 240Q — Pan Tilt Zoom OSD Menu — If the PTZ unit supports an internal configuration menu, this can be accessed using the On-Screen Display (OSD). Conf igure the analog camera by opening and navigating through its intern al menu in this display. PTZ Control Queue Use the PTZ Control Queue window to en able and disable PTZ queueing. This windo[…]

  • Page 34: Axis Axis Video Server AXIS 240Q

    34 AXIS 240Q — Pan Tilt Zoom 2. Event — Y ou can set up the AXIS 240Q to tak e control of the queue and move to a specific position for 20 seconds when tr iggered by an alarm. The event will immediately be place first i n queue ex cept when an administrator is in control. For more information see Triggered Event , on page 24. 3. Operator — Same as […]

  • Page 35: Axis Axis Video Server AXIS 240Q

    35 AXIS 240Q — System Options System Options Security — Users User access control is enabled by default, when the administrator sets the root password on first access. New users are authorized with us er names and passwords, or the administrator can choose to allow anonymous viewer login to the Live View page, as described below: Users — the use r […]

  • Page 36: Axis Axis Video Server AXIS 240Q

    36 AXIS 240Q — System Options Security — HTTPS For greater security, the AXIS 240Q can be co nfigured to use HTTPS (Hypertext Transfer Protocol over SSL (Secure Socket Layer)). That is, all communi cation that would otherwise go via HTTP instead goes via an encrypted HTTPS connection. Certificate — to use HTTPS for communication with the AXIS 240Q,[…]

  • Page 37: Axis Axis Video Server AXIS 240Q

    37 AXIS 240Q — System Options Date & Time Format Used in Images — specify th e format s for th e date and time (12h or 24h) displayed in the Live View video streams. Use the predefined formats or use your ow n custom date and time formats. See File Naming & Date/Time Formats in the online help for information on how to create your own file […]

  • Page 38: Axis Axis Video Server AXIS 240Q

    38 AXIS 240Q — System Options Network — Advanced TCP/IP Settings DNS Configuration DNS (Domain Name Service) provides the transl ation of host names to IP addresses on your network. Obtain DNS se rver address via DHCP — automatically use the DNS server settings provided by the DHCP server. Click the View button to see th e curr en t settings. Use t[…]

  • Page 39: Axis Axis Video Server AXIS 240Q

    39 AXIS 240Q — System Options HTTPS The default HTTP port number (443) can be changed to any port within the range 1024-65535. This is useful for e.g. simple port mapping. NAT traversal Use NAT traversal when your video server is lo cated on an intran et and you want to make it available from the other side of a NAT router. Network Traffic The defa[…]

  • Page 40: Axis Axis Video Server AXIS 240Q

    40 AXIS 240Q — System Options SNMP The Simple Network Management Protocol (SNMP) allows the remote management of network devices. Select the version of SNMP to use, depending on the level of security required. Select the version of SNMP to us e, by checking the appr opriate box. The three levels of security are: • SNMP V1 — includes no security ?[…]

  • Page 41: Axis Axis Video Server AXIS 240Q

    41 AXIS 240Q — System Options • the static IP address • the default router •t h e s u b n e t m a s k • the system time • Default — The default button should be used with caution. Pressing this will return all of the video server’s settings (including the IP address) to the fa ctory default values. Upgrade Server — See Upgrading the […]

  • Page 42: Axis Axis Video Server AXIS 240Q

    42 AXIS 240Q — System Options Log Level for Email — from the drop-down list, select the level of information to send as email and enter the destination email address. Advanced Scripting is an advanced function that provides the possibility to customize and use scripts. This function is a very powerful tool. Caution! Improper use may cause unexpecte[…]

  • Page 43: Axis Axis Video Server AXIS 240Q

    43 AXIS 240Q — System Options Resetting to the Factory Default Settings To reset the AXIS 240Q to the orig inal defau l t set t ings , go to the System Options > Maintenance web page (as described in Maintenance , on page 40 ), or use the control button on the front pane l, as described below: Using the Control Button 1. Switch off the AXIS 240Q[…]

  • Page 44: Axis Axis Video Server AXIS 240Q

    44 AXIS 240Q — Unit Con nectors Unit Connectors The following connectors ar e described in this section: • The D-Sub Connector , on page 44 • The I/O T erminal Connector , on page 45 • COM P o rts RS-232 and RS-485 , on page 46 The D-Sub Connector The AXIS 240Q provides one 9-pin D-sub connector, providing the physical interface for an RS-232[…]

  • Page 45: Axis Axis Video Server AXIS 240Q

    45 AXIS 240Q — Unit Connectors The I/O Terminal Connector This section describes the pinout and interf ace support provided by th e 12-pin I/O terminal connector, which includes: • 4 digital transistor outputs • 4 digital inputs • an RS-485 interface • auxiliary power and GND The terminal connector is used in applications for e.g. motion de[…]

  • Page 46: Axis Axis Video Server AXIS 240Q

    46 AXIS 240Q — Unit Con nectors Schematic Diagram — I/O Terminal Connector o z o z z z o o o z o o o o o A B AXIS 240Q Video Server 3.3V PS-K 9V e.g. pu sh but t on Device GND PIN 5 RS-485 9 10 11 12 o o 8 o 6 z z RS-232 D-SUB o 5 o 4 o 3 o 2 Switch Mode Power Supply o 7 1 o o Relay GND + COM Ports RS-232 and RS-485 The COM Ports RS-232 and RS-485 […]

  • Page 47: Axis Axis Video Server AXIS 240Q

    47 AXIS 240Q — Troubleshooting Troubleshooting Checking the Firmware Firmware is software that de termines the functionality of the AXIS 240Q. On e of your first actions when troubleshooting a problem should be to check the currently installed version. The latest version may contain a correction that fixes your particular problem. The current firmw[…]

  • Page 48: Axis Axis Video Server AXIS 240Q

    48 AXIS 240Q — Troubleshooting Emergency Recovery Procedure If power or the network connec tion to the AXIS 240Q is lost during the upgrade, the process will fail and the unit will become unresponsive. A flashing red Status LED indicates a failed upgrade. To recover the unit, follow the steps below. The serial number i s found on the underside labe[…]

  • Page 49: Axis Axis Video Server AXIS 240Q

    49 AXIS 240Q — Troubleshooting Symptoms, Possible Causes and Remedial ActionsI Problems se tting the IP ad dress Using ARP/Ping — the IP address must be set within two mi nu te s after power has been applied to the video server Restart th e server and try again. En sure also the pin g length is s et to 408. See or ARP and Ping in Windows on page 13[…]

  • Page 50: Axis Axis Video Server AXIS 240Q

    50 AXIS 240Q — Troubleshooting For additional assistance, please contact your re seller or check the product’s support pages on the Axis Website at www.axis.com/techsup Video Image Pro bl ems Image too dark or too light. Check that the termination dip switch for the vid eo source is set to the correct positi on. See also the online help on Video […]

  • Page 51: Axis Axis Video Server AXIS 240Q

    51 AXIS 240Q — Technical Specifica tions Technical Specifications Item Specification Model • AXIS 240Q: Four port video server Also available as Video Rack Solution Video compression • Motion-JPEG. • Single snapshot JPEG images. Resolutions • 4CIF, 2CIFExp, 2CIF, QCIF • max 704×480 (NTSC) 768×576 (PAL) • max 160×120 (NTSC) 176×144 (PAL […]

  • Page 52: Axis Axis Video Server AXIS 240Q

    52 AXIS 240Q — Technical Specifications Supported protocols • Motion JPEG streaming: HTTP. • Event notification: HTTP, TCP, SMTP. • Image upload: FTP, SMTP, HTTP. • Network control data: DHCP, UPnP, ARP, DNS, DynDNS3, NAT traversal, SOCKS, SNMP, NTP Security: SSL/TLS*, HTTPS. • More information on protocol us age is available at: www.axis[…]

  • Page 53: Axis Axis Video Server AXIS 240Q

    53 AXIS 240Q — Technical Specifica tions Performance considerations When setting up your system it is important to consider how various settings and situations will affe ct the ove rall performance. Th e following aspects are among the most important to consider: • Image resolution — High image resoluti on creates larger images. More data increas[…]

  • Page 54: Axis Axis Video Server AXIS 240Q

    54 AXIS 240Q — Glossary Glossary ActiveX — A control (or set of rules) used by a browser. ActiveX controls are o ften downloaded and installed automatically as required . API — Application Programming Interface. The Axis API can be used for integrating Axis products into other applications. ARP — Address Resolution Pro tocol. This is used to associ[…]

  • Page 55: Axis Axis Video Server AXIS 240Q

    55 AXIS 240Q — Glossary TCP/IP — Transmission Control Protocol/In ternet Protocol. A suite of network p rotocols that determine how data is transmitted. TCP/IP is used on many networks, including the Internet. TCP keeps track of the individual packets of information and IP contains the rules for how the packets are actually sent and received. UDP -[…]

  • Page 56: Axis Axis Video Server AXIS 240Q

    56 AXIS 24 0Q — Index Index A Accessing the video server 8 Action 23 Action buttons 9, 21 Active/Inactive (output button) 9 Active/Inactive (output buttons) 21 Administrators 12, 35 Advanced TCP/IP settings 38 Alarm 23, 26, 4 5 Allowed IP addresse s 35 AMC 9, 10 Anonymous viewing 35 Auxiliary power 45 B Backup 41 Basic configuration 12 Buffers 25 C[…]

  • Page 57: Axis Axis Video Server AXIS 240Q

    57 AXIS 240Q — Index O Operators 35 Output buttons 9, 21 Own home page 20 Own web files 20 P Pan Tilt Zoom 46 Pan/Tilt/Zoom 30 Performance 53 Pinout 40 Pinout — I/O connectors 45 Port status 27 Post-trigger buffer 25 Power adapter 7 Preset positions 32 Pre-trigger buffer 25 PTZ 28 PTZ commands 20, 31 PTZ control queue 33 Pulse (outputs) 9, 21 Q Qua[…]

Источник

Посмотреть инструкция для Axis 240Q бесплатно. Руководство относится к категории сервера, 1 человек(а) дали ему среднюю оценку 6.3. Руководство доступно на следующих языках: английский. У вас есть вопрос о Axis 240Q или вам нужна помощь? Задайте свой вопрос здесь

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Axis 240Q.

Какой вес Axis 240Q?

Axis 240Q имеет вес 540 g.

Какие сертификаты Axis 240Q имеет?

Axis 240Q имеет следующие сертификаты: EMC: CE compliant according to: EN550022/1998 Class B, EN550024/1998, EN61000-3-2: 2000, EN61000-3-3:2000\nFCC Subpart B Class A, B, VCCI Class B, C-tick AS/NZS 3548.

От чего зависит скорость загрузки в Интернете?

Скорость загрузки в Интернете зависит от вашего типа соединения. Если ваша скорость составляет 25 Мб/сек, это означает, что теоретически скорость загрузки будет составлять 25 Мб/сек.

Инструкция Axis 240Q доступно в русский?

К сожалению, у нас нет руководства для Axis 240Q, доступного в русский. Это руководство доступно в английский.

Не нашли свой вопрос? Задайте свой вопрос здесь

Источник
  • Страница 1

    AXIS 240Q Video Server User’s Manual[…]

  • Страница 2

    AXIS COMMUNICATIONS <Product Name> Qui ck User’s Guide About This Document This manual is in tended for admin istrators and users of th e AXIS 240Q Video Server, and is applicable for firmware release 4.30. It includes instructions for using and managing the AXIS 240Q on your network. Previous experience of networking will be of use wh en i[…]

  • Страница 3

    3 AXIS 240Q Table of contents Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 AXIS 240Q Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 AXIS 240Q Rear Panel . . . . . . . . . . . . . . . .[…]

  • Страница 4

    4 AXIS 240Q Security — HTTPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Network — Basic TCP/IP Settings . . . . . . . . . . . . . . . . . . . . . . . . .[…]

  • Страница 5

    5 AXIS 240Q — Product Description Product Description The AXIS 240Q is a fully featured video se rver for security surveillance and remote monitoring needs. Based on the AXIS ARTPEC-2 compression chip, it can digitize up to 4 analog video sources and make these availabl e on the network as real-time Motion JPEG video streams, at a maximum frame rat[…]

  • Страница 6

    6 AXIS 240Q — Product Description AXIS 240Q Front Panel Indicators — After completion of the startup and self-test routines, the multi-colored Network, Status, Power Indicators flash as follows: Unlit No connection. Green Steady for connection to a 100 Mbit/s network. Flas hes for network ac tivity . Amber Steady for connection to a 10 Mbit /s netw[…]

  • Страница 7

    7 AXIS 240Q — Product Description AXIS 240Q Rear Panel The Serial Number is located on the label on the underside of the unit. Power adapter connector — A single socket for connectio n of the PS-K power adapter. I/O Terminal connector — The I/O Terminal co nnector provides the phys ical interface to 4 digital transistor outputs, 4 digital inputs an[…]

  • Страница 8

    8 AXIS 240Q — Using the video server Using the video server Installation Before the AXIS 240Q can be acce ssed it must be installed on your network. Please see the installation guide supplied with the pr oduct. Alternatively, download it from www.axis.com Accessing the video server The AXIS 240Q can be used with most standard operating systems and […]

  • Страница 9

    9 AXIS 240Q — Using the video server Notes: •To view streaming video in Microsoft Internet Explorer, you must set your browser to allow ActiveX controls and allow AMC (A XIS Media Control) to be installed on your workstation. If your workstation restricts the use of additio na l software components, the AXIS 240Q ca n be configured to use a Java […]

  • Страница 10

    10 AXIS 240Q — Video Streams Note that these AMC toolbar functions can also be accessed by right-c licking in the image. For information on using Pan/Tilt/Zoom controls, please see page 28. Video Streams The Live View page in the AXIS 240Q provides access to Motion JPEG video streams, as well as to single JPEG images. Other applicat ions and client[…]

  • Страница 11

    11 AXIS 240Q — Video Streams Other methods of acce ssing the video stream Video and images from the AXIS 240Q can al so be accessed in the following ways: • If supported by the client, the AXIS 240Q can use Motion JPEG server push to display video. This option maintains an open HTTP co nnection to the browser and sends data as and when required, […]

  • Страница 12

    12 AXIS 240Q — Configuring the vide o server Configuring the video server This section describes how to configur e the AXIS 240Q and is intended for: • administra tors , who have unrestricted access to all the Setup tools • operators , who have access to the Video & Image, Live View Config and Event Config — uration settings. The AXIS 240Q […]

  • Страница 13

    13 AXIS 240Q — Configurin g the video server Video & Image Video 1 Video 2 Video 3 Video 4 Image Make basic image settings ; resoluti on, comp ression, color settings, rotate image, etc. Place an overlay image in the video image. Set limits on the video stream time and the frame rate. Video Source Settings to modify the horizontal and vertic al[…]

  • Страница 14

    14 AXIS 240Q — Configuring the vide o server System Options Security Users Access to the video server can be restricted to defined users only (maximum of 20). The administrator has unrestricte d access to the Setu p tools and dete rmines rights for users at 3 levels; Administrator, Operator, Viewer. IP Address Filter Once enabled, only the IP addre[…]

  • Страница 15

    15 AXIS 240Q — Video & Image Settings Video & Image Settings The following descriptions show examples of the available features in the AXIS 240Q. For details about each setting, pl ease refer to the online help available from each page. Click to access the online help. Image Settings Image Appearance Modify the Image Appearance to optimize […]

  • Страница 16

    16 AXIS 240Q — Video & Image Settings Text Overlay Settings Include date, time and/or text of your choice to be viewed on the image. The color of the text may be set to white or black, while ba ckground color may be set to white, black, transparent or semitransparent. The position of the text is set either to the top or the bottom of the image.[…]

  • Страница 17

    17 AXIS 240Q — Video & Image Settings Quad Stream Settings The settings are the same as the individual image settings and are active only when the quad stream view is selected, see Image Settings , on page 15 . Overlay/Mask Settings Overlay text Overlay image Overlay/ Mask Type Overlay/Mask Type allows you to place an overlay , or up to three p[…]

  • Страница 18

    18 AXIS 240Q — Video & Image Settings Overlay image re quirements: Overlay image limitations : • The maximum overlay image size supported by the AXIS 240Q is the same as the max — imum image resolution. See T echnical Specifications, on page 5 1 . • When a text overlay is also used, this re duces the amount of space available to the overlay[…]

  • Страница 19

    19 AXIS 240Q — Live View Config Live View Config Layout These are the tools for deciding the layout of the Live View page. The layout can be set in 3 ways: • Use Axis look — the layout is unchanged. • Use custom se ttin gs — modify the default page with your own colors, images etc. Click the Configure but — ton and see the following page. • O[…]

  • Страница 20

    20 AXIS 240Q — Live View Config Upload Own Web Fi les Your own web files, background picture, color etc. must first be uploaded to the AXI S 240Q in order to be available for selection in the Custom Settings setup dialog. Once uploaded, the files are shown in the drop-down list. 1. Enter the pat h to th e file, to e.g. a file located on your workst[…]

  • Страница 21

    21 AXIS 240Q — Live View Config 6. Ente r th e cgi link : http://192.168.0.125/axis-cgi/com/ptz.cgi ?camera=1&continuo uspantiltmove=0,0 7. These links will appear in the web interfac e and can be used to control the PTZ camera For more information on the Axis HTTP API, see the Support / Develope r pages on the Axis Web site at http://w ww.axis[…]

  • Страница 22

    22 AXIS 240Q — Live View Config External Video You can add links to other Axis network devi ces available over the ne twork. Thes e sources can be displayed on the Live View page, just as if they were video sourc es connected directly to the AXIS 240Q. Click the Add button to open the External Video Sour ce Setup dialog, which is used to make all t[…]

  • Страница 23

    23 AXIS 240Q — Event Configuration Event Configuration This section describes how to configure the AXIS 240Q fo r alarm handling. Various actions can be configured to ru n when ce rtain types of events occur. A set of parameters describing how and when th e video server is to perform certain actions — the circumstances that start an event e.g. at a[…]

  • Страница 24

    24 AXIS 240Q — Event Con figuration Event Types An Event Type is a set of parameters describing how and when the video server is to perform certain actions. Example: If somebody walks past the connected camera , and an event has been configured to act on this, the video server can e.g. record and send video images to an FTP server, or send a notifi[…]

  • Страница 25

    25 AXIS 240Q — Event Configuration Pre-trigger and Post-trigger buffers This function is very useful when checking to see what happened immediately before and after a trigger, e.g. 2 minutes before and after a door was opened. Check the Up load images checkbox under Event Types > Add Triggered… > Triggered by… to ex pand the web page with[…]

  • Страница 26

    26 AXIS 240Q — Event Con figuration 7. Click OK to save the Event in the Event Types list. Please see the online help for descriptions of each available option. Motion Detection In the Motion Detection menu, you can configur e the video source(s) for motion detection. The motion detection feat ure is used to gene rate an alarm whenever movement occ[…]

  • Страница 27

    27 AXIS 240Q — Event Configuration 6. A djust the size (drag the bottom right-ha nd corner) and position (click on the text at the top and drag to the desired position). 7. A djust the Object size, History and Sensit ivity profile sliders (see table below for details). Any detected motion within an active window is th en indicated by red peaks in t[…]

  • Страница 28

    28 AXIS 240Q — Pan Tilt Zoom Pan Tilt Zoom Installing PTZ Devices The AXIS 240Q supports several PTZ devices. Pl ease see www.axis.com for a complete list of supported devices, and to obt ain the correct driver. Follow the instructions below to install a PTZ device: 1. Using an appropriate cable, connect th e device to your selected port (RS-232 or[…]

  • Страница 29

    29 AXIS 240Q — Pan Tilt Zoom Note: Advanced users and application developers can also use the Axis Application Programming Interface and HTTP specification for generi c control of PTZ devices us ing CGI commands or a TCP/IP client. Please refer to the Axis Website at www.axis .com for further information. PTZ Configuration Once PTZ has been inst al[…]

  • Страница 30

    30 AXIS 240Q — Pan Tilt Zoom PTZ Controls If the AXIS 240Q has been appropriately conf igured, the Live View page will display the controls available for the installed Pan Tilt Zoom (PTZ) device. The administrator can enable/disable the controls for specified users. Video sources Preset positions Tilt bar (relative) The exact controls shown depends[…]

  • Страница 31

    31 AXIS 240Q — Pan Tilt Zoom In contrast, when using an absolute driver, each position on the bar (see ri ght) represents a defined position in the device’s range of movement, with the center of the bar represen ting the point midway between the tw o extremes of movement. Clicking a position directly on the bar moves the camera directly to th e n[…]

  • Страница 32

    32 AXIS 240Q — Pan Tilt Zoom Preset Positions Also available with many PTZ devices are Preset positions . These pre sets are selected from the drop-down Source list on the Live View page and will move and/or zoom the camera to a pre-defined position, i.e. to cover an area of particular interest. Events can also be configured to go to preset positio[…]

  • Страница 33

    33 AXIS 240Q — Pan Tilt Zoom OSD Menu — If the PTZ unit supports an internal configuration menu, this can be accessed using the On-Screen Display (OSD). Conf igure the analog camera by opening and navigating through its intern al menu in this display. PTZ Control Queue Use the PTZ Control Queue window to en able and disable PTZ queueing. This windo[…]

  • Страница 34

    34 AXIS 240Q — Pan Tilt Zoom 2. Event — Y ou can set up the AXIS 240Q to tak e control of the queue and move to a specific position for 20 seconds when tr iggered by an alarm. The event will immediately be place first i n queue ex cept when an administrator is in control. For more information see Triggered Event , on page 24. 3. Operator — Same as […]

  • Страница 35

    35 AXIS 240Q — System Options System Options Security — Users User access control is enabled by default, when the administrator sets the root password on first access. New users are authorized with us er names and passwords, or the administrator can choose to allow anonymous viewer login to the Live View page, as described below: Users — the use r […]

  • Страница 36

    36 AXIS 240Q — System Options Security — HTTPS For greater security, the AXIS 240Q can be co nfigured to use HTTPS (Hypertext Transfer Protocol over SSL (Secure Socket Layer)). That is, all communi cation that would otherwise go via HTTP instead goes via an encrypted HTTPS connection. Certificate — to use HTTPS for communication with the AXIS 240Q,[…]

  • Страница 37

    37 AXIS 240Q — System Options Date & Time Format Used in Images — specify th e format s for th e date and time (12h or 24h) displayed in the Live View video streams. Use the predefined formats or use your ow n custom date and time formats. See File Naming & Date/Time Formats in the online help for information on how to create your own file […]

  • Страница 38

    38 AXIS 240Q — System Options Network — Advanced TCP/IP Settings DNS Configuration DNS (Domain Name Service) provides the transl ation of host names to IP addresses on your network. Obtain DNS se rver address via DHCP — automatically use the DNS server settings provided by the DHCP server. Click the View button to see th e curr en t settings. Use t[…]

  • Страница 39

    39 AXIS 240Q — System Options HTTPS The default HTTP port number (443) can be changed to any port within the range 1024-65535. This is useful for e.g. simple port mapping. NAT traversal Use NAT traversal when your video server is lo cated on an intran et and you want to make it available from the other side of a NAT router. Network Traffic The defa[…]

  • Страница 40

    40 AXIS 240Q — System Options SNMP The Simple Network Management Protocol (SNMP) allows the remote management of network devices. Select the version of SNMP to use, depending on the level of security required. Select the version of SNMP to us e, by checking the appr opriate box. The three levels of security are: • SNMP V1 — includes no security ?[…]

  • Страница 41

    41 AXIS 240Q — System Options • the static IP address • the default router •t h e s u b n e t m a s k • the system time • Default — The default button should be used with caution. Pressing this will return all of the video server’s settings (including the IP address) to the fa ctory default values. Upgrade Server — See Upgrading the […]

  • Страница 42

    42 AXIS 240Q — System Options Log Level for Email — from the drop-down list, select the level of information to send as email and enter the destination email address. Advanced Scripting is an advanced function that provides the possibility to customize and use scripts. This function is a very powerful tool. Caution! Improper use may cause unexpecte[…]

  • Страница 43

    43 AXIS 240Q — System Options Resetting to the Factory Default Settings To reset the AXIS 240Q to the orig inal defau l t set t ings , go to the System Options > Maintenance web page (as described in Maintenance , on page 40 ), or use the control button on the front pane l, as described below: Using the Control Button 1. Switch off the AXIS 240Q[…]

  • Страница 44

    44 AXIS 240Q — Unit Con nectors Unit Connectors The following connectors ar e described in this section: • The D-Sub Connector , on page 44 • The I/O T erminal Connector , on page 45 • COM P o rts RS-232 and RS-485 , on page 46 The D-Sub Connector The AXIS 240Q provides one 9-pin D-sub connector, providing the physical interface for an RS-232[…]

  • Страница 45

    45 AXIS 240Q — Unit Connectors The I/O Terminal Connector This section describes the pinout and interf ace support provided by th e 12-pin I/O terminal connector, which includes: • 4 digital transistor outputs • 4 digital inputs • an RS-485 interface • auxiliary power and GND The terminal connector is used in applications for e.g. motion de[…]

  • Страница 46

    46 AXIS 240Q — Unit Con nectors Schematic Diagram — I/O Terminal Connector o z o z z z o o o z o o o o o A B AXIS 240Q Video Server 3.3V PS-K 9V e.g. pu sh but t on Device GND PIN 5 RS-485 9 10 11 12 o o 8 o 6 z z RS-232 D-SUB o 5 o 4 o 3 o 2 Switch Mode Power Supply o 7 1 o o Relay GND + COM Ports RS-232 and RS-485 The COM Ports RS-232 and RS-485 […]

  • Страница 47

    47 AXIS 240Q — Troubleshooting Troubleshooting Checking the Firmware Firmware is software that de termines the functionality of the AXIS 240Q. On e of your first actions when troubleshooting a problem should be to check the currently installed version. The latest version may contain a correction that fixes your particular problem. The current firmw[…]

  • Страница 48

    48 AXIS 240Q — Troubleshooting Emergency Recovery Procedure If power or the network connec tion to the AXIS 240Q is lost during the upgrade, the process will fail and the unit will become unresponsive. A flashing red Status LED indicates a failed upgrade. To recover the unit, follow the steps below. The serial number i s found on the underside labe[…]

  • Страница 49

    49 AXIS 240Q — Troubleshooting Symptoms, Possible Causes and Remedial ActionsI Problems se tting the IP ad dress Using ARP/Ping — the IP address must be set within two mi nu te s after power has been applied to the video server Restart th e server and try again. En sure also the pin g length is s et to 408. See or ARP and Ping in Windows on page 13[…]

  • Страница 50

    50 AXIS 240Q — Troubleshooting For additional assistance, please contact your re seller or check the product’s support pages on the Axis Website at www.axis.com/techsup Video Image Pro bl ems Image too dark or too light. Check that the termination dip switch for the vid eo source is set to the correct positi on. See also the online help on Video […]

  • Страница 51

    51 AXIS 240Q — Technical Specifica tions Technical Specifications Item Specification Model • AXIS 240Q: Four port video server Also available as Video Rack Solution Video compression • Motion-JPEG. • Single snapshot JPEG images. Resolutions • 4CIF, 2CIFExp, 2CIF, QCIF • max 704×480 (NTSC) 768×576 (PAL) • max 160×120 (NTSC) 176×144 (PAL […]

  • Страница 52

    52 AXIS 240Q — Technical Specifications Supported protocols • Motion JPEG streaming: HTTP. • Event notification: HTTP, TCP, SMTP. • Image upload: FTP, SMTP, HTTP. • Network control data: DHCP, UPnP, ARP, DNS, DynDNS3, NAT traversal, SOCKS, SNMP, NTP Security: SSL/TLS*, HTTPS. • More information on protocol us age is available at: www.axis[…]

  • Страница 53

    53 AXIS 240Q — Technical Specifica tions Performance considerations When setting up your system it is important to consider how various settings and situations will affe ct the ove rall performance. Th e following aspects are among the most important to consider: • Image resolution — High image resoluti on creates larger images. More data increas[…]

  • Страница 54

    54 AXIS 240Q — Glossary Glossary ActiveX — A control (or set of rules) used by a browser. ActiveX controls are o ften downloaded and installed automatically as required . API — Application Programming Interface. The Axis API can be used for integrating Axis products into other applications. ARP — Address Resolution Pro tocol. This is used to associ[…]

  • Страница 55

    55 AXIS 240Q — Glossary TCP/IP — Transmission Control Protocol/In ternet Protocol. A suite of network p rotocols that determine how data is transmitted. TCP/IP is used on many networks, including the Internet. TCP keeps track of the individual packets of information and IP contains the rules for how the packets are actually sent and received. UDP -[…]

  • Страница 56

    56 AXIS 24 0Q — Index Index A Accessing the video server 8 Action 23 Action buttons 9, 21 Active/Inactive (output button) 9 Active/Inactive (output buttons) 21 Administrators 12, 35 Advanced TCP/IP settings 38 Alarm 23, 26, 4 5 Allowed IP addresse s 35 AMC 9, 10 Anonymous viewing 35 Auxiliary power 45 B Backup 41 Basic configuration 12 Buffers 25 C[…]

  • Страница 57

    57 AXIS 240Q — Index O Operators 35 Output buttons 9, 21 Own home page 20 Own web files 20 P Pan Tilt Zoom 46 Pan/Tilt/Zoom 30 Performance 53 Pinout 40 Pinout — I/O connectors 45 Port status 27 Post-trigger buffer 25 Power adapter 7 Preset positions 32 Pre-trigger buffer 25 PTZ 28 PTZ commands 20, 31 PTZ control queue 33 Pulse (outputs) 9, 21 Q Qua[…]

Источник

Понравилась статья? Поделить с друзьями:
  • Монтелар инструкция по применению взрослым аналоги
  • Руководство по daum potplayer
  • Митьков клиническое руководство по ультразвуковой диагностике скачать все тома
  • P85 d3 gigabyte мануал
  • Олопатадин глазные капли инструкция по применению цена отзывы