- Manuals
- Brands
- AmpliVox Manuals
- Medical Equipment
- 240
- Operation manual
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
Model 240
Operation Manual
OM024-6 Model 240 Operating Manual
Page 1
Related Manuals for AmpliVox 240
Summary of Contents for AmpliVox 240
-
Page 1
Model 240 Operation Manual OM024-6 Model 240 Operating Manual Page 1… -
Page 2: About This Manual
ABOUT THIS MANUAL READ THIS OPERATING MANUAL BEFORE ATTEMPTING TO USE THE INSTRUMENT. This manual is valid for the Model 240 (applies from firmware version 4v47 onwards – please refer to section 1.3). This product is manufactured by: Amplivox Ltd.
-
Page 3
For supply in US only Caution: Federal Law restricts this device to sale by or on the order of a licenced medical professional. -
Page 4: Table Of Contents
Contents 1 Introduction 1.1 Intended applications 1.2 Unpacking 1.3 Firmware version 1.4 Standard contents 1.5 Optional accessories 2 Important Safety Instructions 2.1 Precautions 2.2 Electromagnetic compatibility (EMC) considerations 2.3 Power supply options 2.4 Audiometer connections 2.5 Data transfer to a printer 2.6 Data transfer to a computer 3 Using the Audiometer 3.1 Switching the audiometer on and off…
-
Page 5: Introduction
1 Introduction Thank you for purchasing an Amplivox audiometer. The Amplivox Model 240 is a diagnostic audiometer that will give many years of reliable service if treated with care. 1.1 Intended applications The Model 240 diagnostic audiometer is designed for use by audiologists, general practitioners, hearing aid dispensers and child health professionals.
-
Page 6: Optional Accessories
Printer cable(s) USB Cable Audiocups (noise reducing earphone enclosures) 2 Important Safety Instructions The Model 240 instrument must be used only by practitioners qualified to perform audiometric tests. It is intended for use as a screening and diagnostic tool. 2.1 Precautions…
-
Page 7: Electromagnetic Compatibility (Emc) Considerations
Once the voltage of the batteries is too low to operate the instrument the message “Replace Battery” will appear. Note that local regulations are likely to cover disposal of the batteries. OM024-6 Model 240 Operating Manual Page 3…
-
Page 8: Audiometer Connections
Patient Response Switch * The relevant part numbers are indicated in Section 12 Note regarding the 6-pin mini DIN connector: This is a restricted socket for Amplivox use only. No user access is permitted. Page 4 OM024-6 Model 240 Operating Manual…
-
Page 9: Data Transfer To A Printer
The audiometer is supplied with software to allow connection to a computer for the transfer of test results (see Section 3.9). You must use the designated USB cable which is available from Amplivox (see Section 12). OM024-6 Model 240 Operating Manual…
-
Page 10: Using The Audiometer
This indicates that when the PRESENT key is pressed, a tone will be presented at 30dBHL at a frequency of 1kHz (1000Hz) to the designated ear. On start up the audiometer defaults to the left ear. Page 6 OM024-6 Model 240 Operating Manual…
-
Page 11: Audiometer Controls
YES key to load the audiogram; then release MENU Contrast Adjust contrast using the SIGNAL keys Shows either “Not in use” or the battery Battery voltage, e.g. “5.3v”. OM024-6 Model 240 Operating Manual Page 7…
-
Page 12
Press this key when an automatic test has been completed to displays the results; use the LEFT and RIGHT keys to display the results for the required ear and the FREQUENCY keys to view the entire frequency range. Page 8 OM024-6 Model 240 Operating Manual… -
Page 13
5dB steps; to scroll through the range keep the key pressed PRESENT Press to present the displayed test signal to the patient. The “PRESENT” indicator above the display will illuminate green during presentation OM024-6 Model 240 Operating Manual Page 9… -
Page 14: Threshold Retention Function
Left ear 20dBHL Right ear 10dBHL To clear the Threshold Retention memory, use the Clear Test menu option described in Section 3.4.2. To record and review bone conduction thresholds use the BONE key. Page 10 OM024-6 Model 240 Operating Manual…
-
Page 15: Saving Audiograms In Internal Memory
3.8 Printing audiograms Three designated thermal printers (the Able AP1300 or the Sanibel MPT- II) are available as options for use with the Model 240 audiometer. The correct printer must be selected (use the MENU options described in Section 3.4.2 to make this selection).
-
Page 16: Data Transfer To Noah Or Audiview
3.9 Data transfer to NOAH or AudiView To transfer test results stored within the audiometer to a NOAH database the Amplivox NOAH Audilink software must be installed on to a computer. Alternatively, Amplivox AudiView allows data to be transferred to a computer and subsequently viewed, annotated &…
-
Page 17
30dB, increase the attenuation level in 10dB steps until the patient responds (2) When the patient responds, wait for 1 to 2 seconds and present the tone again at the same level; however, if the patient does respond at OM024-6 Model 240 Operating Manual Page 13… -
Page 18
Print the results (Section 3.8), or Transfer the results to a computer (Section 3.9) Refer to Section 3.4.2 to clear the thresholds at the end of a test and, if required, switch off the audiometer. Page 14 OM024-6 Model 240 Operating Manual… -
Page 19
(3) To initiate a test press and hold the MENU key, then press the AUTO key and release both OM024-6 Model 240 Operating Manual Page 15… -
Page 20
The thresholds are retained by the audiometer and may be viewed, stored, printed or transferred to a computer (see Section 4.4.4). Refer to Section 3.4.2 to clear the thresholds at the end of a test and, if required, switch off the audiometer. Page 16 OM024-6 Model 240 Operating Manual… -
Page 21
(e.g. if no response was made and the retry option was not chosen). The operator then has the option to use manual audiometry to obtain any missing thresholds. Press RESULTS to continue. OM024-6 Model 240 Operating Manual Page 17… -
Page 22: Specification
USB interface: Transfer of test results to a computer 5.2 Maximum hearing levels provided at each frequency Frequency, Air conduction, dBHL Bone conduction, dBHL (DD45) (B-71) 1000 1500 2000 3000 4000 6000 8000 Page 18 OM024-6 Model 240 Operating Manual…
-
Page 23
Continuous operation Equipment mobility Portable The Model 240 Audiometer is classified as a Class IIa device under Annex IX of the EU Medical Devices Directive. It is intended for use as a diagnostic audiometer instrument. OM024-6 Model 240 Operating Manual… -
Page 24: Symbols
6 to 8 hours use from alkaline batteries. Frequency Modulation Carrier frequencies: 125Hz to 8kHz as per pure tones Modulation waveform: Sinusoidal Rising and falling symmetry: Symmetrical on linear frequency scale Modulating frequency: 15.625Hz Frequency deviation: +/-10% Page 20 OM024-6 Model 240 Operating Manual…
-
Page 25: Routine Maintenance
8 Routine Maintenance 8.1 Audiometer maintenance The Model 240 audiometer is a precision instrument. Handle it carefully in order to ensure its continued accuracy and service. When cleaning the instrument, first disconnect it from the mains supply. Use a soft cloth and…
-
Page 26
Before use check the transducer cables and connectors for signs of wear and/or damage. If you find any, please replace the item immediately by contacting Amplivox or your Amplivox distributor, requesting the relevant part number (see Section 12). Handle the audiometric headset, bone vibrator headset and other accessories with care. -
Page 27
8.3 Mains adapter maintenance Before use check the mains AC adapter for signs of wear and/or damage. If you find any replace the adapter immediately by contacting Amplivox or your Amplivox distributor. Refer to Section 12 for approved part numbers. -
Page 28: Instrument Storage And Transportation
Batteries (if fitted) should be removed if the instrument is not to be used over an extended period of time. 10 Calibration and Repair of the Instrument Amplivox recommends that this audiometer should be calibrated on an annual basis. Please contact Amplivox or the designated distributor for details of calibration services.
-
Page 29: Guarantee
12 Ordering Consumables and Accessories To order consumables, additional accessories and to replace detachable parts that have been damaged, please contact Amplivox for current prices and delivery charges. The items available are listed below: Stock No.
-
Page 30: Disposal Information
For any waste electrical units purchased from Amplivox that either: bear the crossed out wheeled bin symbol with black bar underneath or, have been replaced with new Amplivox products on a like-for-like basis Page 26 OM024-6 Model 240 Operating Manual…
-
Page 31
B2B Compliance will be able to provide further information on how to recycle your waste electrical units and answer any queries you may have. B2B Compliance Tel: +44 (0) 1691 676 124 (Option 2) Email: operations@b2bcompliance.org.uk OM024-6 Model 240 Operating Manual Page 27… -
Page 32: Appendix 1 — Emc Guidance & Manufacturer’s Declaration
Appendix 1 — EMC Guidance & Manufacturer’s Declaration Guidance and manufacturer’s declaration – electromagnetic emissions The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of Model 240 Audiometer should assure that it is used in such an environment.
-
Page 33
Guidance and manufacturer’s declaration – electromagnetic immunity (1) The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of the Model 240 Audiometer should assure that it is used in such an environment. -
Page 34
IEC 61000-4-8 typical location in a typical commercial or hospital environment. NOTE U is the a.c. mains voltage prior to the application of the test level Page 30 OM024-6 Model 240 Operating Manual… -
Page 35
Guidance and manufacturer’s declaration – electromagnetic immunity (2) The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of the Model 240 Audiometer should assure that it is used in such an environment. -
Page 36
RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Model 240 Audiometer is used exceeds the applicable RF compliance level above, the Model 240 Audiometer should be observed to verify normal operation. -
Page 37
Recommended separation distances between portable and mobile RF communications equipment and the Model 240 Audiometer The Model 240 Audiometer is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Model 240 Audiometer can help prevent electromagnetic… -
Page 38: Appendix 2 — Use With Non-Medical Electrical Equipment
16 of IEC 60601-1:2005 are met. The following signal inputs and outputs on the Model 240 audiometer are electrically isolated to the requirements of IEC 60601-1 in order to reduce any potential hazard associated with the use of mains-powered equipment…
-
Page 39
Diagram 1: Model 240 used with the medically-approved mains adapter Mains Outlet Medical Mains Adapter Model 240 Audiometer OM024-6 Model 240 Operating Manual Page 35… -
Page 40
Diagram 2: Model 240 used with the medically-approved mains adapter and printer Mains Outlet Medical Mains Adapter Model 240 Audiometer Mains Outlet Printer via Printer PRINTER socket Power Supply Page 36 OM024-6 Model 240 Operating Manual… -
Page 41
Diagram 3: Model 240 used with the medically-approved mains adapter and PC Mains Outlet Medical Mains Adapter Model 240 Audiometer Mains Outlet Power Supply via USB socket OM024-6 Model 240 Operating Manual Page 37…
Перейти к контенту
- Manuals
- Brands
- AmpliVox Manuals
- Medical Equipment
- 240
- Operation manual
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
Model 240
Operation Manual
OM024-6 Model 240 Operating Manual
Page 1
Related Manuals for AmpliVox 240
Summary of Contents for AmpliVox 240
-
Page 1
Model 240 Operation Manual OM024-6 Model 240 Operating Manual Page 1… -
Page 2: About This Manual
ABOUT THIS MANUAL READ THIS OPERATING MANUAL BEFORE ATTEMPTING TO USE THE INSTRUMENT. This manual is valid for the Model 240 (applies from firmware version 4v47 onwards – please refer to section 1.3). This product is manufactured by: Amplivox Ltd.
-
Page 3
For supply in US only Caution: Federal Law restricts this device to sale by or on the order of a licenced medical professional. -
Page 4: Table Of Contents
Contents 1 Introduction 1.1 Intended applications 1.2 Unpacking 1.3 Firmware version 1.4 Standard contents 1.5 Optional accessories 2 Important Safety Instructions 2.1 Precautions 2.2 Electromagnetic compatibility (EMC) considerations 2.3 Power supply options 2.4 Audiometer connections 2.5 Data transfer to a printer 2.6 Data transfer to a computer 3 Using the Audiometer 3.1 Switching the audiometer on and off…
-
Page 5: Introduction
1 Introduction Thank you for purchasing an Amplivox audiometer. The Amplivox Model 240 is a diagnostic audiometer that will give many years of reliable service if treated with care. 1.1 Intended applications The Model 240 diagnostic audiometer is designed for use by audiologists, general practitioners, hearing aid dispensers and child health professionals.
-
Page 6: Optional Accessories
Printer cable(s) USB Cable Audiocups (noise reducing earphone enclosures) 2 Important Safety Instructions The Model 240 instrument must be used only by practitioners qualified to perform audiometric tests. It is intended for use as a screening and diagnostic tool. 2.1 Precautions…
-
Page 7: Electromagnetic Compatibility (Emc) Considerations
Once the voltage of the batteries is too low to operate the instrument the message “Replace Battery” will appear. Note that local regulations are likely to cover disposal of the batteries. OM024-6 Model 240 Operating Manual Page 3…
-
Page 8: Audiometer Connections
Patient Response Switch * The relevant part numbers are indicated in Section 12 Note regarding the 6-pin mini DIN connector: This is a restricted socket for Amplivox use only. No user access is permitted. Page 4 OM024-6 Model 240 Operating Manual…
-
Page 9: Data Transfer To A Printer
The audiometer is supplied with software to allow connection to a computer for the transfer of test results (see Section 3.9). You must use the designated USB cable which is available from Amplivox (see Section 12). OM024-6 Model 240 Operating Manual…
-
Page 10: Using The Audiometer
This indicates that when the PRESENT key is pressed, a tone will be presented at 30dBHL at a frequency of 1kHz (1000Hz) to the designated ear. On start up the audiometer defaults to the left ear. Page 6 OM024-6 Model 240 Operating Manual…
-
Page 11: Audiometer Controls
YES key to load the audiogram; then release MENU Contrast Adjust contrast using the SIGNAL keys Shows either “Not in use” or the battery Battery voltage, e.g. “5.3v”. OM024-6 Model 240 Operating Manual Page 7…
-
Page 12
Press this key when an automatic test has been completed to displays the results; use the LEFT and RIGHT keys to display the results for the required ear and the FREQUENCY keys to view the entire frequency range. Page 8 OM024-6 Model 240 Operating Manual… -
Page 13
5dB steps; to scroll through the range keep the key pressed PRESENT Press to present the displayed test signal to the patient. The “PRESENT” indicator above the display will illuminate green during presentation OM024-6 Model 240 Operating Manual Page 9… -
Page 14: Threshold Retention Function
Left ear 20dBHL Right ear 10dBHL To clear the Threshold Retention memory, use the Clear Test menu option described in Section 3.4.2. To record and review bone conduction thresholds use the BONE key. Page 10 OM024-6 Model 240 Operating Manual…
-
Page 15: Saving Audiograms In Internal Memory
3.8 Printing audiograms Three designated thermal printers (the Able AP1300 or the Sanibel MPT- II) are available as options for use with the Model 240 audiometer. The correct printer must be selected (use the MENU options described in Section 3.4.2 to make this selection).
-
Page 16: Data Transfer To Noah Or Audiview
3.9 Data transfer to NOAH or AudiView To transfer test results stored within the audiometer to a NOAH database the Amplivox NOAH Audilink software must be installed on to a computer. Alternatively, Amplivox AudiView allows data to be transferred to a computer and subsequently viewed, annotated &…
-
Page 17
30dB, increase the attenuation level in 10dB steps until the patient responds (2) When the patient responds, wait for 1 to 2 seconds and present the tone again at the same level; however, if the patient does respond at OM024-6 Model 240 Operating Manual Page 13… -
Page 18
Print the results (Section 3.8), or Transfer the results to a computer (Section 3.9) Refer to Section 3.4.2 to clear the thresholds at the end of a test and, if required, switch off the audiometer. Page 14 OM024-6 Model 240 Operating Manual… -
Page 19
(3) To initiate a test press and hold the MENU key, then press the AUTO key and release both OM024-6 Model 240 Operating Manual Page 15… -
Page 20
The thresholds are retained by the audiometer and may be viewed, stored, printed or transferred to a computer (see Section 4.4.4). Refer to Section 3.4.2 to clear the thresholds at the end of a test and, if required, switch off the audiometer. Page 16 OM024-6 Model 240 Operating Manual… -
Page 21
(e.g. if no response was made and the retry option was not chosen). The operator then has the option to use manual audiometry to obtain any missing thresholds. Press RESULTS to continue. OM024-6 Model 240 Operating Manual Page 17… -
Page 22: Specification
USB interface: Transfer of test results to a computer 5.2 Maximum hearing levels provided at each frequency Frequency, Air conduction, dBHL Bone conduction, dBHL (DD45) (B-71) 1000 1500 2000 3000 4000 6000 8000 Page 18 OM024-6 Model 240 Operating Manual…
-
Page 23
Continuous operation Equipment mobility Portable The Model 240 Audiometer is classified as a Class IIa device under Annex IX of the EU Medical Devices Directive. It is intended for use as a diagnostic audiometer instrument. OM024-6 Model 240 Operating Manual… -
Page 24: Symbols
6 to 8 hours use from alkaline batteries. Frequency Modulation Carrier frequencies: 125Hz to 8kHz as per pure tones Modulation waveform: Sinusoidal Rising and falling symmetry: Symmetrical on linear frequency scale Modulating frequency: 15.625Hz Frequency deviation: +/-10% Page 20 OM024-6 Model 240 Operating Manual…
-
Page 25: Routine Maintenance
8 Routine Maintenance 8.1 Audiometer maintenance The Model 240 audiometer is a precision instrument. Handle it carefully in order to ensure its continued accuracy and service. When cleaning the instrument, first disconnect it from the mains supply. Use a soft cloth and…
-
Page 26
Before use check the transducer cables and connectors for signs of wear and/or damage. If you find any, please replace the item immediately by contacting Amplivox or your Amplivox distributor, requesting the relevant part number (see Section 12). Handle the audiometric headset, bone vibrator headset and other accessories with care. -
Page 27
8.3 Mains adapter maintenance Before use check the mains AC adapter for signs of wear and/or damage. If you find any replace the adapter immediately by contacting Amplivox or your Amplivox distributor. Refer to Section 12 for approved part numbers. -
Page 28: Instrument Storage And Transportation
Batteries (if fitted) should be removed if the instrument is not to be used over an extended period of time. 10 Calibration and Repair of the Instrument Amplivox recommends that this audiometer should be calibrated on an annual basis. Please contact Amplivox or the designated distributor for details of calibration services.
-
Page 29: Guarantee
12 Ordering Consumables and Accessories To order consumables, additional accessories and to replace detachable parts that have been damaged, please contact Amplivox for current prices and delivery charges. The items available are listed below: Stock No.
-
Page 30: Disposal Information
For any waste electrical units purchased from Amplivox that either: bear the crossed out wheeled bin symbol with black bar underneath or, have been replaced with new Amplivox products on a like-for-like basis Page 26 OM024-6 Model 240 Operating Manual…
-
Page 31
B2B Compliance will be able to provide further information on how to recycle your waste electrical units and answer any queries you may have. B2B Compliance Tel: +44 (0) 1691 676 124 (Option 2) Email: operations@b2bcompliance.org.uk OM024-6 Model 240 Operating Manual Page 27… -
Page 32: Appendix 1 — Emc Guidance & Manufacturer’s Declaration
Appendix 1 — EMC Guidance & Manufacturer’s Declaration Guidance and manufacturer’s declaration – electromagnetic emissions The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of Model 240 Audiometer should assure that it is used in such an environment.
-
Page 33
Guidance and manufacturer’s declaration – electromagnetic immunity (1) The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of the Model 240 Audiometer should assure that it is used in such an environment. -
Page 34
IEC 61000-4-8 typical location in a typical commercial or hospital environment. NOTE U is the a.c. mains voltage prior to the application of the test level Page 30 OM024-6 Model 240 Operating Manual… -
Page 35
Guidance and manufacturer’s declaration – electromagnetic immunity (2) The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of the Model 240 Audiometer should assure that it is used in such an environment. -
Page 36
RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Model 240 Audiometer is used exceeds the applicable RF compliance level above, the Model 240 Audiometer should be observed to verify normal operation. -
Page 37
Recommended separation distances between portable and mobile RF communications equipment and the Model 240 Audiometer The Model 240 Audiometer is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Model 240 Audiometer can help prevent electromagnetic… -
Page 38: Appendix 2 — Use With Non-Medical Electrical Equipment
16 of IEC 60601-1:2005 are met. The following signal inputs and outputs on the Model 240 audiometer are electrically isolated to the requirements of IEC 60601-1 in order to reduce any potential hazard associated with the use of mains-powered equipment…
-
Page 39
Diagram 1: Model 240 used with the medically-approved mains adapter Mains Outlet Medical Mains Adapter Model 240 Audiometer OM024-6 Model 240 Operating Manual Page 35… -
Page 40
Diagram 2: Model 240 used with the medically-approved mains adapter and printer Mains Outlet Medical Mains Adapter Model 240 Audiometer Mains Outlet Printer via Printer PRINTER socket Power Supply Page 36 OM024-6 Model 240 Operating Manual… -
Page 41
Diagram 3: Model 240 used with the medically-approved mains adapter and PC Mains Outlet Medical Mains Adapter Model 240 Audiometer Mains Outlet Power Supply via USB socket OM024-6 Model 240 Operating Manual Page 37…
READ THIS OPERATING MANUAL BEFORE ATTEMPTING TO USE THE
INSTRUMENT.
This manual is valid for the Model 240 (applies from firmware version
4v47 onwards – please refer to section 1.3).
This product is manufactured by:
Amplivox Ltd.
Amplivox Ltd.
6 Oasis Park, Eynsham
10393 West 70th Street
Oxfordshire, OX29 4TP
Eden Prairie
United Kingdom
MN 55344
www.amplivox.ltd.uk
www.amplivox.ltd.us
For all enquiries please contact us under:
Tel: +44 (0)1865 880846
Tel: 888 941 4208
Fax: +44 (0)1865 880426
Fax: 952 903 4100
sales@amplivox.ltd.uk
sales@amplivox.ltd.us
Specifications:800/800375-240.pdf file (29 Nov 2022) |
Accompanying Data:
AmpliVox 240 Medical Equipment PDF Operation Manual (Updated: Tuesday 29th of November 2022 06:59:10 AM)
Rating: 4.2 (rated by 92 users)
Compatible devices: Otowave 302, CA850 series 5, MAA2000-XS, neXus, 250 Series, Aquatec Sorrento, 500 Stationary, LY-2191.
Recommended Documentation:
Text Version of Operation Manual
(Ocr-Read Summary of Contents of some pages of the AmpliVox 240 Document (Main Content), UPD: 29 November 2022)
-
38, AmpliVox 240 Page 34 OM024-6 Model 240 Operating Manual Appendix 2 — Use with Non-medical Electrical Equipment Any person who connects external equipment to signal input, signal output or other connectors has created a medical electrical system and is therefore responsible for the sy…
-
14, Page 10 OM024-6 Model 240 Operating Manual 3.5 Threshold Retention Function This function records the thresholds for both ears at each frequency tested (air conduction and bone conduction). Thresholds may be stored manually or automatically. The operator can then rev…
-
12, Page 8 OM024-6 Model 240 Operating Manual Bone masking Use the SIGNAL keys to select the AC headset or the optional masking earpiece as the means of masking Print audiogram? Press YES and release MENU; then press YES to confirm the print operation or N…
-
13, AmpliVox 240 OM024-6 Model 240 Operating Manual Page 9 +20dB This enables tone levels to be presented with up to 20dB higher output; press the key and then use SIGNAL to access the extra 20dB; an indicator above the key illuminates green to show that the function is active, and an additional dis…
-
39, OM024-6 Model 240 Operating Manual Page 35 Diagram 1: Model 240 used with the medically-approved mains adapter Mains Outlet Medical Mains Adapter Model 240 Audiom…
-
10, Page 6 OM024-6 Model 240 Operating Manual 3 Using the Audiometer 3.1 Switching the audiometer on and off Press and briefly hold the switch marked (located on the back panel). No warm-up time is required. The display will briefly show the model and the typ…
-
15, AmpliVox 240 OM024-6 Model 240 Operating Manual Page 11 3.6 Saving audiograms in internal memory The user may store up to 12 audiograms (AC & BC data), referenced by number, in the internal memory of the audiometer. To save the current set of audiogram thresholds (the “retained” values described in Sectio…
-
AmpliVox 240 User Manual
-
AmpliVox 240 User Guide
-
AmpliVox 240 PDF Manual
-
AmpliVox 240 Owner’s Manuals
Recommended: KD-C5CWP, Progresso, Greensmaster Flex 1820
-
Volker Kepler 5384
Brief instructions for use Model 5384 Kepler — Style, Selectfrom year of manufacture 03/2016 onwardsVölker GmbH • Wullener Feld 79 • 58454 Witten/Germany Telefone +49 2302 960 96-0 • Telefax +49 2302 960 96-16 • www.voelker.de • [email protected] KA282 Rev. 5 (03.2018)Hand control E2476Style modelHand co …
Kepler 5384 2
-
bort medical StabiloHip
DE BORT StabiloHip HüftprotektorVielen Dank für das Vertrauen in ein Medizinprodukt der BORT GmbH. Bitte lesen Sie die vorliegende Gebrauchsanweisung sorgfältig durch. Bei Fragen wenden Sie sich an Ihren Arzt oder Fachhandel von dem Sie dieses Medizinprodukt erhalten haben.ZweckbestimmungBei diesem Medizinprod …
StabiloHip 4
-
Physio Control LIFEPAK CR PLus
Maximizing the Life of the SafeGuard™ Power SystemLIFEPAK CR® Plus and LIFEPAK EXPRESS® DEFIBRILLATORSPower System OverviewThe LIFEPAK CR Plus and LIFEPAK EXPRESS defibrillators are equipped with the SafeGuard power system. The SafeGuard power system, unique in the industry, is comprised of an internal battery …
LIFEPAK CR PLus 2
-
Hill-Rom Liko SafetyVest 93
7EN160146 Rev. 5ENGLISH 2020Liko™ SafetyVest™ Mod. 93Instrucons for UseProduct DescriponThe Liko SafetyVest is mainly intended for use in combinaon with the Sabina™ sit-to-stand li with a narrow sling bar (Sabina 350 SlingBar).In combinaon with Sabina sit-to-stand li, the SafetyVest fo …
Liko SafetyVest 93 8
Popular Right Now:
Operating Impressions, Questions and Answers:
Table of Contents for AmpliVox 240:
-
Contents 1 Introduction 1 1.1 Intended applications 1 1.2 Unpacking 1 1.3 Firmware version 1 1.4 Standard contents 1 1.5 Optional accessories 2 2 Important Safety Instructions 2 2.1 Precautions 2 2.2 Electromagnetic compatibility (EMC) considerations 3 2.3 Power supply options 3 2.4 Audiometer connections 4 2.5 Data transfer to a printer 5 2.6 Data transfer to a computer 5 3 Using the Audiometer 6 3.1 Switching the audiometer on and off 6
-
ABOUT THIS MANUAL READ THIS OPERATING MANUAL BEFORE ATTEMPTING TO USE THE INSTRUMENT. This manual is valid for the Model 240 (applies from firmware version 4v47 onwards – please refer to section 1.3). This product is manufactured by: Amplivox Ltd. 6 Oasis Park, Eynsham Oxfordshire, OX29 4TP United Kingdom www.amplivox.ltd.uk Amplivox Ltd. 10393 West 70th Street Eden Prairie MN 55344 www.amplivox.ltd.us For all enquiries please contact us under: Tel: +44 (0)1865 880846 Fax: +4
-
OM024-6 Model 240 Operating Manual Page 35 Diagram 1: Model 240 used with the medically-approved mains adapter Mains Outlet Medical Mains Adapter Model 240 Audiometer
-
Page 6 OM024-6 Model 240 Operating Manual 3 Using the Audiometer 3.1 Switching the audiometer on and off Press and briefly hold the switch marked (located on the back panel). No warm-up time is required. The display will briefly show the model and the type of headphone currently in use. If a secondary headphone has been enabled (e.g. E-5A) it will then be necessary to select the required headphone as follows: Either — press YES to c
-
Page 36 OM024-6 Model 240 Operating Manual Diagram 2: Model 240 used with the medically-approved mains adapter and printer Mains Outlet Medical Mains Adapter Model 240 Audiometer Mains Outlet Printer via Printer PRINTER socket Power Supply
-
OM024-6 Model 240 Operating Manual Page 3 Do not attempt to open, modify or service the instrument. Return the instrument to the manufacturer or distributor for all repair and servicing requirements. Opening the instrument will void the warranty. 2.2 Electromagnetic compatibility (EMC) considerations Medical electrical equipment needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in
-
OM024-6 Model 240 Operating Manual Page 27 please contact our WEEE Compliance Scheme using the details below. B2B Compliance will be able to provide further information on how to recycle your waste electrical units and answer any queries you may have. B2B Compliance Tel: +44 (0) 1691 676 124 (Option 2) Email: [email protected]
-
Page 28 OM024-6 Model 240 Operating Manual Appendix 1 — EMC Guidance & Manufacturer’s Declaration Guidance and manufacturer’s declaration – electromagnetic emissions The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of Model 240 Audiometer should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment – guidance RF emissions C
-
OM024-6 Model 240 Operating Manual Page 7 3.4 Audiometer controls 3.4.1 Multifunction Keys Several keys on the audiometer have different functions depending on the actual mode of operation. These are MENU (OFF), PULSE (RESET), LEFT (NO), RIGHT (YES), MASK (RESULTS), BONE (AUTO) and FREQUENCY (MENU SELECT). The use of these keys is described below. 3.4.2 MENU Pressing and holding MENU accesses t
-
Page 32 OM024-6 Model 240 Operating Manual Guidance and manufacturer’s declaration – electromagnetic immunity (2) survey, a should be less than the compliance level in each frequency range. b Interference may occur in the vicinity of equipment marked with the following symbol: NOTE 1 At 80MHz and 800MHz, the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic pr
-
Page 16 OM024-6 Model 240 Operating Manual The automatic test will then proceed, starting with the familiarising routine (if selected) and then testing at 1kHz followed by the higher frequencies before testing for lower frequencies. The test may be cancelled at any time by pressing the RESET key; any thresholds established will be retained unless cleared or overwritten. Automatic testing proceeds by increasing the tone level in 5dB steps unti
-
OM024-6 Model 240 Operating Manual Page 37 Diagram 3: Model 240 used with the medically-approved mains adapter and PC Mains Outlet Medical Mains Adapter Model 240 Audiometer Mains Outlet PC Power Supply PC via USB socket
-
OM024-6 Model 240 Operating Manual Page 11 3.6 Saving audiograms in internal memory The user may store up to 12 audiograms (AC & BC data), referenced by number, in the internal memory of the audiometer. To save the current set of audiogram thresholds (the “retained” values described in Section 3.5) press and hold the MENU key, press FREQUENCY repeatedly until “Save Audiogram to 1” appears on screen. Use the SIGNAL keys to select a location numbered
-
OM024-6 Model 240 Operating Manual Page 1 1 Introduction Thank you for purchasing an Amplivox audiometer. The Amplivox Model 240 is a diagnostic audiometer that will give many years of reliable service if treated with care. 1.1 Intended applications The Model 240 diagnostic audiometer is designed for use by audiologists, general practitioners, hearing aid dispensers and child health professionals. It is capable of undertaking both air conduction (AC) and bone conduction (BC) tests with or without masking. The instrumen
Questions, Opinions and Exploitation Impressions:
You can ask a question, express your opinion or share our experience of AmpliVox 240 device using right now.
-6%
272,000 290,000
3 в наличии
-
Описание
-
Производитель
-
Отзывы (0)
Описание
Аудиометр Amplivox 240 – аппарат с функцией автоматического тестирования, узкополосной маскировкой, функцией сохранения порога и Talkover. Диапазон аттенюатора: до 120 дБ нПС.
Малые габариты данного устройства (270х175х68), компактный корпус с лаконичным дизайном, сравнительно небольшой вес и специальный футляр, который входит в стандартную комплектацию, позволяют ему быть одним из самых эргономичных портативных аудиометров данного производителя, которые пользуются спросом в области педиатрии, оториноларингологии, а также в общей практике.
Аппарат позволяет осуществлять аудиометрию по костной и воздушной проводимости, имеет простую систему управления, а также удобный дисплей.
Нужные данные сохраняются в памяти, переносятся на персональный компьютер или распечатываются (принтер – опциональное дополнение).
База данных NOAH |
стандарт |
Функция автоматического тестирования |
есть |
Общие габариты |
270х175х68 |
Принтер |
Опциональное использование |
АС |
-10 dBHL до 120 dBHL (максимум) |
BC |
-10 dBHL до 70 dBHL (максимум) |
Наушники |
Опция |
Стандарты EMC |
IEC 60601-1-2 |
Диапазон аттенюатора |
до 120 дБ нПС |
Питание от батареи |
опция |
Оперативное запоминающее устройство |
опция |
Функция сохранения порога |
Предназначена для автоматического или ручного сохранения пороговых значений для каждого уха и всех частот. |
Точность |
<1 % |
Подключение |
Через USB |
Тесты |
на костную и воздушную проводимость (с маскировкой или без маскировки). |
Дисплей |
С подсветкой, 2 линии |
Узкополосная маскировка |
стандарт |
Безопасность |
IEC 60601-1 |
Диапазон частот |
АС: 125-8kHz BC: 250 Hz-8kHz |
Используемые сигналы |
Импульс, трель, сигнал одиночный. |
Talkover |
Специальная встроенная функция для прерывания теста и подачи голоса оператора с микрофона. |
КОМПЛЕКТАЦИЯ
Стандартная комплектация аудиометра включает в себя:
- Аудиометр Amplivox 240
- сетевой адаптер
- гарнитура аудиометрическая
- карта аудиограмм
- футляр для транспортировки прибора
- свидетельство о поверке
- переключатель ответа пациента
- гарнитура костного проводника
- руководство по применению
Вместе с аудиометром можно также заказать дополнительные принадлежности:
- Принтер
- Наушник для маскировки
- Аудиочашки (шумоподавляющие колпаки наушников)
- Запасной кабель USB
- Наушники-вкладыши
- Питание от батарей
- Интерфейсная программа NOAH (Audilink)
- Дополнительные аудиографические карты
- Кабель для принтера
Производитель
Amplivox
Table of Contents for AmpliVox 240:
-
Contents 1 Introduction 1 1.1 Intended applications 1 1.2 Unpacking 1 1.3 Firmware version 1 1.4 Standard contents 1 1.5 Optional accessories 2 2 Important Safety Instructions 2 2.1 Precautions 2 2.2 Electromagnetic compatibility (EMC) considerations 3 2.3 Power supply options 3 2.4 Audiometer connections 4 2.5 Data transfer to a printer 5 2.6 Data transfer to a computer 5 3 Using the Audiometer 6 3.1 Switching the audiometer on and off 6 3.2 Testing the patient response switch 6
-
Page 22 OM024-6 Model 240 Operating Manual mild detergent to clean the instrument panel when required. Refer to ISO 8253-1 for additional guidance. 8.2 Transducer maintenance Before use check the transducer cables and connectors for signs of wear and/or damage. If you find any, please replace the item immediately by contacting Amplivox or your Amplivox distributor, requesting the relevant part number (see Section 12). Handle the audiometric
-
OM024-6 Model 240 Operating Manual Page 3 Do not attempt to open, modify or service the instrument. Return the instrument to the manufacturer or distributor for all repair and servicing requirements. Opening the instrument will void the warranty. 2.2 Electromagnetic compatibility (EMC) considerations Medical electrical equipment needs special precautions regarding EMC and needs to be installed and put into service
-
OM024-6 Model 240 Operating Manual Page 7 3.4 Audiometer controls 3.4.1 Multifunction Keys Several keys on the audiometer have different functions depending on the actual mode of operation. These are MENU (OFF), PULSE (RESET), LEFT (NO), RIGHT (YES), MASK (RESULTS), BONE (AUTO) and FREQUENCY (MENU SELECT). The use of these keys is described below. 3.4.2 MENU Pressing and holding MENU accesses the following options. Use the MENU SELECT keys to step through the available options an
-
Page 30 OM024-6 Model 240 Operating Manual Immunity test IEC 60601 test level Compliance level Electromagnetic environment – guidance Voltage dips, short interruptions and voltage variations on power supply input lines IEC 61000-4-11 <5% U T (>95% dip in U T ) for 0.5 cycle 40% U T (60% dip in U T ) for 5 cycles 70% U T (30% dip in U T ) for 25 cycles <5% U T (>95% dip in U T ) for 5 sec <5% U T (>95%
-
Page 36 OM024-6 Model 240 Operating Manual Diagram 2: Model 240 used with the medically-approved mains adapter and printer Mains Outlet Medical Mains Adapter Model 240 Audiometer Mains Outlet Printer via Printer
-
OM024-6 Model 240 Operating Manual Page 23 used once only for a single ear for a single patient. Do not reuse eartips as this will pose the risk of ear-to-ear or patient-to-patient cross infection. Further guidance is provided below: Ensure that the black tubing protruding the foam eartip is not applied to the patient; this must be attached to the sound tube of the insert transducer Roll the foam eartip into the smallest possible diameter Insert the eartip into the ear canal of the
-
OM024-6 Model 240 Operating Manual Page 13 4.3 Headset The headset or appropriate transducer must be fitted by a qualified person to ensure a proper seal and a comfortable fit. The leads from the headset are connected to the instrument and the headset is then fitted to the patient. 4.4 Manual audiometry 4.4.1 Pre-test (1) Switch the audiometer on (2) Perform a listening check (3) Decide whether to use the
-
OM024-6 Model 240 Operating Manual Page 27 please contact our WEEE Compliance Scheme using the details below. B2B Compliance will be able to provide further information on how to recycle your waste electrical units and answer any queries you may have. B2B Compliance Tel: +44 (0) 1691 676 124 (Option 2) Email: [email protected]
-
OM024-6 Model 240 Operating Manual Page 17 4.5.5 Error messages The following error messages are possible while an automatic test is running. Depending on circumstances it may be necessary to provide further instruction to the patient and/or perform manual familiarisation (see Section 4.4.2). No response! This occurs when the patient has made no response and the tone level has reached the maximum value. An option to repeat the test at that frequency is presented. Press YES to repeat or NO to skip to the nex
-
Page 8 OM024-6 Model 240 Operating Manual Bone masking Use the SIGNAL keys to select the AC headset or the optional masking earpiece as the means of masking Print audiogram? Press YES and release MENU; then press YES to confirm the print operation or NO to cancel Battery timeout Use the SIGNAL keys to select either 45 or 90 seconds (see Section 2.3) Select phones This option is on
-
OM024-6 Model 240 Operating Manual Page 21 Masking Sounds Masking sounds available: Narrow band at test frequencies Narrow-band noise bandwidth: Meets IEC 60645-1; ANSI S3.6 Reference levels: Refer to ISO 389-4 Insert Masking Earpiece Calibration method: With 2cc coupler compliant with IEC 126 Transducers Types and reference levels: DD45: ISO 389-1, Table 2 E-5A: ISO 389-2, Table 1 B-71: ISO 389-3, Table 1 Static headband force: H
-
Page 28 OM024-6 Model 240 Operating Manual Appendix 1 — EMC Guidance & Manufacturer’s Declaration Guidance and manufacturer’s declaration – electromagnetic emissions The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of Model 240 Audiometer should assure that it is used in such an environment. Emissions test Compliance Electromagnetic
-
Page 20 OM024-6 Model 240 Operating Manual 6 Symbols The following symbols appear on the audiometer or mains adapter: Definition: Refer to instruction manual (mandatory). Definition: Type B applied part – an applied part providing protection against electric shock, particularly regarding allowable patient leakage current and patient auxiliary current. The applied parts are the left & right earphones, bone vibrator, insert masker, patient response switch and the associated cab
-
OM024-6 Model 240 Operating Manual Page 29 Guidance and manufacturer’s declaration – electromagnetic immunity (1) The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of the Model 240 Audiometer should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance level Electromagnetic environment – guidance Electrostatic Disch
-
Page 10 OM024-6 Model 240 Operating Manual 3.5 Threshold Retention Function This function records the thresholds for both ears at each frequency tested (air conduction and bone conduction). Thresholds may be stored manually or automatically. The operator can then review the results at the end of the test and record them on an audiogram card, print them with the optional printer (see Section 3.8), save them to the internal memory (see Section
Questions, Opinions and Exploitation Impressions:
You can ask a question, express your opinion or share our experience of AmpliVox 240 device using right now.
(Ocr-Read Summary of Contents of some pages of the AmpliVox 240 Document (Main Content), UPD: 04 June 2023)
-
38, Page 34 OM024-6 Model 240 Operating Manual Appendix 2 — Use with Non-medical Electrical Equipment Any person who connects external equipment to signal input, signal output or other connectors has created a medical electrical system and is therefore responsible for the system complying with the requirements of clause 16 of IEC 60601-1:2005 (General requirements for basic safety and essential performance). If connec…
-
9, OM024-6 Model 240 Operating Manual Page 5 For connected parts marked * only connect the accessories supplied with the instrument or supplied by Amplivox or an Amplivox distributor. These parts have been tested for use with the Model 240 Diagnostic Audiometer for compliance with the standards IEC 60601-1 and IEC 60601-1-2. The use of accessories other than those specified may compromise compliance with these standards. For other sockets refer to Appendix 2. 2.5 Data trans…
-
12, AmpliVox 240 Page 8 OM024-6 Model 240 Operating Manual Bone masking Use the SIGNAL keys to select the AC headset or the optional masking earpiece as the means of masking Print audiogram? Press YES and release MENU; then press YES to confirm the print operation or NO to cancel Battery timeout Use the SIGNAL keys to select either 45 or 90 seconds (see Section 2.3) Select phones This…
-
39, OM024-6 Model 240 Operating Manual Page 35 Diagram 1: Model 240 used with the medically-approved mains adapter Mains Outlet Medical Mains Adapter Model 240 Audiometer
… -
27, OM024-6 Model 240 Operating Manual Page 23 used once only for a single ear for a single patient. Do not reuse eartips as this will pose the risk of ear-to-ear or patient-to-patient cross infection. Further guidance is provided below: Ensure that the black tubing protruding the foam eartip is not applied to the patient; this must be attached to the sound tube of the insert transducer Roll the foam eartip into the smallest possible diameter Insert the…
-
22, Page 18 OM024-6 Model 240 Operating Manual 5 Specification 5.1 Output data Outputs: Left earphone, Right earphone, Bone (L&R) and Insert masking Frequency range (Hz): Air: 125-8kHz Bone: 250Hz-8kHz Frequency accuracy: <1% Distortion: <2% Output level range (AC): -10dBHL min; see Section 5.2 for maximum Output level range (BC): -10dBHL min; see Section 5.2 for maximum Insert masking output: 90dBHL max (250-4…
-
35, OM024-6 Model 240 Operating Manual Page 31 Guidance and manufacturer’s declaration – electromagnetic immunity (2) The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of the Model 240 Audiometer should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance level Electromagnetic environment – guidance Conducted RF IEC…
-
14, Page 10 OM024-6 Model 240 Operating Manual 3.5 Threshold Retention Function This function records the thresholds for both ears at each frequency tested (air conduction and bone conduction). Thresholds may be stored manually or automatically. The operator can then review the results at the end of the test and record them on an audiogram card, print them with the optional printer (see Section 3.8)…
-
15, OM024-6 Model 240 Operating Manual Page 11 3.6 Saving audiograms in internal memory The user may store up to 12 audiograms (AC & BC data), referenced by number, in the internal memory of the audiometer. To save the current set of audiogram thresholds (the “retained” values described in Section 3.5) press and hold the MENU key, press FREQUENCY repeatedly until “Save Audiogram to 1” appears on screen. Use the SIGNAL keys to select a l…
-
40, Page 36 OM024-6 Model 240 Operating Manual Diagram 2: Model 240 used with the medically-approved mains adapter and printer Mains Outlet Medical Mains Adapter Model 240 Audiometer Mains Outlet Printer via Printer PRINTER socket Power Supply
… -
11, OM024-6 Model 240 Operating Manual Page 7 3.4 Audiometer controls 3.4.1 Multifunction Keys Several keys on the audiometer have different functions depending on the actual mode of operation. These are MENU (OFF), PULSE (RESET), LEFT (NO), RIGHT (YES), MASK (RESULTS), BONE (AUTO) and FREQUENCY (MENU SELECT). The use of these keys is described below. 3.4.2 MENU Pressing and holding MENU accesses the following options. Use the MEN…
-
23, AmpliVox 240 OM024-6 Model 240 Operating Manual Page 19 5.3 Physical Data Display: 2 lines of 24 characters Battery power (optional): 4×1.5V “C” cells (alkaline recommended) Mains power: 100-240Vac; 50/60Hz; 0.4A Dimensions: 270mm long x 175mm deep x 68mm high Weight: 0.75kg (approx) Safety: IEC 60601-1 (plus UL, CSA & EN deviations) EMC: IEC 60601-1-2 CE mark: To the EU Medical Device …
-
30, AmpliVox 240 Page 26 OM024-6 Model 240 Operating Manual B128 Carrying case A091-7 Approved mains adapter A085 Patient response switch A051 Audiogram cards (pack of 50) PT01 Printer Able AP1300 A108 Printer cable for audiometer to Able AP1300 C0103 Thermal Printer paper for Able AP1300 PT02 Printer Sanibel MPT-II A102 Printer cable for audiometer to Sanibel MPT-II C0104 Thermal Printer paper for Sa…
-
29, OM024-6 Model 240 Operating Manual Page 25 11 Guarantee All Amplivox instruments are guaranteed against faulty materials and manufacture. The instrument will be repaired free of charge for a period of two years from the date of despatch if returned, carriage paid, to the Amplivox service department. Return carriage is free of charge for customers in the UK and chargeable for overseas customers. Important Note: The following…
-
34, Page 30 OM024-6 Model 240 Operating Manual Immunity test IEC 60601 test level Compliance level Electromagnetic environment – guidance Voltage dips, short interruptions and voltage variations on power supply input lines IEC 61000-4-11 <5% U T (>95% dip in U T ) for 0.5 cycle 40% U T (60% dip in U T ) for 5 cycles 70% U T (30% dip in U T ) for 25 cycles <5% U T (>…
-
24, AmpliVox 240 Page 20 OM024-6 Model 240 Operating Manual 6 Symbols The following symbols appear on the audiometer or mains adapter: Definition: Refer to instruction manual (mandatory). Definition: Type B applied part – an applied part providing protection against electric shock, particularly regarding allowable patient leakage current and patient auxiliary current. The applied parts …
-
32, Page 28 OM024-6 Model 240 Operating Manual Appendix 1 — EMC Guidance & Manufacturer’s Declaration Guidance and manufacturer’s declaration – electromagnetic emissions The Model 240 Audiometer is intended for use in the electromagnetic environment specified below. The customer or user of Model 240 Audiometer should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment – guidanc…
-
4, Contents 1 Introduction 1 1.1 Intended applications 1 1.2 Unpacking 1 1.3 Firmware version 1 1.4 Standard contents 1 1.5 Optional accessories 2 2 Important Safety Instructions 2 2.1 Precautions 2 2.2 Electromagnetic compatibility (EMC) considerations 3 2.3 Power supply options 3 2.4 Audiometer connections 4 2.5 Data transfer to a printer 5 2.6 Data transfer to a computer 5 3 Using the Audiometer 6 3.1 Switching the audi…
READ THIS OPERATING MANUAL BEFORE ATTEMPTING TO USE THE
INSTRUMENT.
This manual is valid for the Model 240 (applies from firmware version
4v47 onwards – please refer to section 1.3).
This product is manufactured by:
Amplivox Ltd.
Amplivox Ltd.
6 Oasis Park, Eynsham
10393 West 70th Street
Oxfordshire, OX29 4TP
Eden Prairie
United Kingdom
MN 55344
www.amplivox.ltd.uk
www.amplivox.ltd.us
For all enquiries please contact us under:
Tel: +44 (0)1865 880846
Tel: 888 941 4208
Fax: +44 (0)1865 880426
Fax: 952 903 4100
sales@amplivox.ltd.uk
sales@amplivox.ltd.us