INSTRUCTIONS FOR USE
Vacations or
holiday program
C1 circuit status
Day of the week
indicator
Current time
Summer time
Time scale
0
3
O N
O FF
1
2
Decrease or move up menu /
3
4
5
6
C1 manual operation
7
C
Go back
C1
DESCRIPTION
The ASTRO NOVA CITY is a time switch designed to control luminous loads in
function of dawn and dusk rimes. It includes a program that automatically adjusts
the dawn lighting-up and dusk switching-off times, without any need for
maintenance. The geographic position location is made by selecting the closest
city to your location from a list of the most important cities in your country.
Its small size of only two modules makes it ideal for installation on boards with little
available space. The unit includes 22 memory spaces in two independent circuits
that can be programmed in an astronomic manner or with fixed times.
INSTALLATION
WARNING: The assembly and installation of the electric apparatus must be
carried out by an authorised installer.
THE ELECTRIC PAOER MUST BE SWITCHED OFF BEFORE COMMENCING
INSTALLATION.
The unit is internally protected against interference by a security circuit. However,
certain especially strong fields could affect correct operation. Interference can be
avoided if the following installation rules are followed:
— The unit must not be installed close to inductive loads
(motors, transformers and contactors etc )
— It is recommended that a separate power line be employed
(fitted with a mains filter if necessary).
— Inductive loads must be fitted with interference suppressors (MOVs, RC filters).
If the time switch is used with other devices in an installation, it will be necessary
to verify that the overall assembly does not generate any parasitic interference.
INSTALLATION: Electronic control device, independently installed in a distribution
cabinet, fitted with 35-mm symmetric profile in accordance with EN 60715 (DIN
rail).
CONNECTION: In accordance with the wiring drawing
C2
4
C1
1
PUTTING INTO SERVICE AND INSTALLATION
All programming sections comply with the following rules:
— The data to be modified s identified by flashing.
i
— Each press of the Δ and ∇ keys increases or decreases the flashing data. If it is
maintained pressed, the increase/decrease speed becomes five units per second.
— After the last data item, confirmation is given by OK or, if no key is pressed within
one minute, the unit returns to normal operation: the screen displays the current
time and the C1 and C2 circuit status.
The dawn and dusk times can be displayed in normal mode by pressing «C», which
shows AST screen, together with current dawn and dusk times.
To install the ASTRO NOVA CITY as an astronomic time switch, it is only
necessary to enter the ZONE MENU, pressing the OK key and selecting the city
closest to the installation and confirm with OK: The CORR screen displays: NO
and the dawn and dusk times (automatically changes from one to another every
five seconds) corresponding to the selected zone. if no corrections are to be
performed, confirm with OK and the switch is programmed with the two circuits
operating in astronomic mode.
ASTRONOMIC TIME SWITCH
ASTRO NOVA CITY
C2 circuit status
Permanet
channel indicator
12-hour
time format
Winter time
Screen
6
9
12
15 18 21
24
Decrease or move down menu /
C2 manual operation
C1
C2
Confirm screen option /
OK
Access menu
C2
MENU
5
6
L
2
3
N
SELECTING LANUGUAGE
Pressing OK enters MENU and with the Δ and ∇ keys select LANGUAGE,
confirming with OK. The Δ and ∇ keys are used to select the desired language,
confirming with OK and returning to the main screen.
ZONE ASSIGNMENT
Pressing OK enters the ZONE MENU, pressing it again enters the city list, the Δ
and ∇ keys are used to select the closest city to the installation zone. Confirm with
OK and the screen displays CORR. NO and the dawn and dusk rimes
alternatively. If the displayed dusk (switch-on) and/or dawn (switch-off) times are to
be modified, «YES» is selected with the Δ and ∇ keys, pressing OK to confirm,
dawn correction is entered and the screen displays CORR. DAWN, the dawn time
and 0:00 in the lower section, which indicates the correction time. Using the Δ and
∇ keys the value is modified increasing or decreasing it up to three hours. Confirm
with OK to display CORR. DUSK and the dusk time, the operation is repeated,
confirmed with OK and returning to the main screen.
PREDEFINED PARAMETERS
The time switch leaves the factory programmed in the country language, set to the
official country date and time, with the zone set to the first alphabetical city to the
list, and 4 pre-established programs.
Program 01: C1 ON DUSK for all days of the week
Program 02: C1 OFF DAWN for all days of the wee k
Program 03: C2 ON DUSK for all days of the week
Program 04: C2 OFF DAWN for all days of the week
on
DUSK
off
C
P1
1
C
P3
2
These programs remain in memory even if a reset is performed.
If any of these programs is not suitable, it can be modified or deleted by pressing
OK and entering the ZONE MENU, selecting PROGRAM MENU with the Δ and ∇
keys and pressing OK again to display PROG 01. The program to be modified or
deleted in selected with the Δ and ∇ keys and OK is pressed. The program
number is displayed onscreen with ENTER (example: PROG:02 ENTER). Again
with the Δ and ∇ keys ENTER is selected if the program is to be modified or
DELETE if it is to be eliminated. If ENTER has been selected, the program to be
modified will be displayed. The Δ and ∇ keys are used to modify and OK to
confirm. If DELETE is selected, once the program has appeared onscreen, OK is
pressed and the program is deleted.
SETTING THE TIME
Pressing OK enters the ZONE MENU and the Δ and ∇ keys are used to select
DATE MENU, confirmed with OK to enter YEAR DATE with the year digits flashing
on the screen and the Δ and ∇ keys are used to change the year value with OK
confirming the entered digits. The MONTH, DAY, DAY OF THE WEEK, TIME and
MINUTES are similarly entered, confirming with OK to enter in ZONE.
CHANGING THE GEOGRAPHIC ZONE
If, once the unit is programmed we wish to change the zone, the dawn or dusk
times, ZONE MENU is entered again and the necessary parameters are changed
in the same way as in the Zone Assignment section.
PROGRAMMING
In normal mode press the OK key to access the ZONE MENU and select
PROGRAM MENU with the Δ and ∇ keys. OK is pressed and PROGRAM PROG
01 is displayed onscreen, if an operation is to be programmed in this program
press OK to display PROG 01 ENTER, press OK again and select the circuit and
the operation to be executed from: C1 ON, C1 OFF, C2 ON and C2 OFF. Confirm
the selection with OK and select the operation type, which may be: Fixed time,
Dawn (DAWN) astronomic time or Dusk (DUSK) astronomic time.
FIXED TIME OPERATION
If fixed time is selected, press OK and enter the hour and minutes, day or days of
the week information in those desired accepting or not, day by day, in those for
which the operation is to be performed, confirming with OK. If, when confirming the
day of the week with the OK key, this is maintained pressed, the operation will be
selected as a holiday, the word HOLIDAYS is displayed onscreen, together with
the symbol » ···· » and confirm with OK, the screen will display PROGRAM PROG
02.
ASTRONOMIC OPERATION
Once the circuit is selected, together with the operation between C1 ON, C1 OFF,
C2 ON and C2 OFF, the type of operation to choose is displayed. The dawn
(DAWN) or dusk (DUSK) operation that is to be performed is selected and the
screen displays the possibility to correct the time for the displayed dawn or dusk
time. If we agree with the screen display the correction is left at zero and the hours
and minutes are confirmed with OK. If it is to corrected by more or less, the
correction time is entered in hours and minutes (up to ± 9 hours and 59 minutes),
automatically displaying the time at which the operation is to be performed, confirm
with OK then select the day or days of the week on which this operation is to be
carried out.
If, on confirming the last day of the week with the OK key, this is maintained
pressed, the operation will be selected as a holiday, the word HOLIDAYS is
displayed onscreen, together with the symbol «
WARNING: If an operation is programmed on a holiday, the HOLIDAYS
program cannot be used and is removed from the menu remaining as a
HOLIDAY period.
If astronomic (dawn — dusk) operations are programmed in the same circuit and
fixed time, they could overlap since astronomic operations move forward and
backward during the year and could lead to incorrect operations.
For example: A shop window lights are to be switched on at nightfall (astronomic
operation) and are to be switched off again at 21:30 (fixed time operation). Since
the astronomic switch-on operation is moved forward during summer, there will be
a time when dusk will fall after 21:30 and the switch-on will occur after the
programmed switch-off time so that no actual switch-off will occur and the lights
will remain on until another switch-off command.
Night period
DAWN
P2
PREDEFINED
OPERATIONS
P4
«.
File Specifications:1636/1636452-astro_nova_city.pdf file (25 Mar 2023) |
Accompanying Data:
Orbis ASTRO NOVA CITY Switch, Timer PDF Instructions For Use (Updated: Saturday 25th of March 2023 11:00:37 PM)
Rating: 4.7 (rated by 56 users)
Compatible devices: DATA ASTRO, MINI T, DATA MICRO +, VEGADIN, ASTRO SAT, Supra, UNO, VEGA.
Recommended Documentation:
Manual, Instructions For Use (Text Version):
(Ocr-Read Summary of Contents of some pages of the Orbis ASTRO NOVA CITY Document (Main Content), UPD: 25 March 2023)
-
1, INTERRUPTOR HORARIO ASTRONÓMICO ASTRO NOVA CITY INSTRUCCIONES DE EMPLEO DESCRIPCIÓN El ASTRO NOVA CITY es un interruptor horario diseñado para controlar las cargas luminosas en función de las horas de ortos (amanecer) y ocasos (anochecer). Dispone de un programa que ajusta automáticamente el horario de encendido (ocaso) y apagado (orto), sin necesidad de mantenimiento. La localización d…
-
2, Orbis ASTRO NOVA CITY ATENCIÓN: Si programamos alguna maniobra en FESTIVO, el programa VACACIONES no puede utilizarse y es eliminado del menú quedando como periodo FESTIVO. Si programamos maniobras, en un mismo circuito, astronómicas (orto – ocaso) y de hora fija tenemos que tener en cuenta que pueden solaparse ya que las maniobras astronómicas se adelantan o atrasan durante el año, pudiéndose producir maniobras inadecuadas. Por ejempl…
-
3, ASTRONOMIC TIME SWITCH ASTRO NOVA CITY INSTRUCTIONS FOR USE DESCRIPTION The ASTRO NOVA CITY is a time switch designed to control luminous loads in function of dawn and dusk times. It includes a program that automatically adjusts the dawn lighting-up and dusk switching-off times, without any need for maintenance. The geographic position location is made by selecting the closest city to your location from a list …
-
4, If astronomic (dawn — dusk) operations are programmed in the same circuit and fixed time, they could overlap since astronomic operations move forward and backward during the year and could lead to incorrect operations. For example: A shop window lights are to be switched on at nightfall (astronomic operation) and are to be switched off again at 21:30 (fixed time operation). Since the astronomic switch-on operation is moved forward during summer, there will be…
-
5, 01/11.2011 A016.26.55836 ORBIS TECNOLOGÍA ELÉCTRICA S.A. Lérida, 61 E-28020 MADRID Tel.: + 34 91 567 22 77 Fax + 34 91 571 40 06 E-mail: [email protected] http://www.orbis.es
…
-
Orbis ASTRO NOVA CITY User Manual
-
Orbis ASTRO NOVA CITY User Guide
-
Orbis ASTRO NOVA CITY PDF Manual
-
Orbis ASTRO NOVA CITY Owner’s Manuals
Recommended: SUB-10, VMOS200AL, CM-2600D, 911 Turbo, 36-0801-W
Links & Tools
Operating Impressions, Questions and Answers:
FIG.1
FIG.2
4
5
6
L
~
1
2
3
N
3000 W
1200 VA
2000 VA
3000 W
600 VA
400 VA
90 VA
FIG.4
on
off
P1 (C1 ON)
P3 (C2 ON)
FIG.5
65
60
02/02.2015
ASTRO NOVA CITY
1
2
0
3
6
9
12 15 18 21 24
3
4
5
6
7
RESET
MENU
C1
C2
C
8
11
9
10
FIG.3
P2 (C1 OFF)
P4 (C2 OFF)
35
A016.17.56816
ENG
FIG. 1
1.
Time scale
3.
Text line
5.
Low battery symbol
18
7.
C1 relay status symbol
9.
Go up the menu / C2 manual
17
operation
16
11. Cancel option / Go back in the menu
15
13.
C2 relay status symbol
15. 12 H / 24 H
14
17. Sunset symbol
13
INSTRUCTIONS FOR USE
ASTRO NOVA CITY is a digital time switch of astronomical update designed for the control of any
electrical installation that requires a solar reference, particularly of the sunrise and nightfall time in a
specific location every day of the year. It incorporates the possibility of performing manoeuvres at a
fixed time of the day, as well as switching on and off at sunrise and sunset. In the astronomical
manoeuvres, it is possible to set a correction of up to ± 9 hours 59 minutes to both C1 and C2 channels.
In addition, it has a series of extra functions such as: automatic change to daylight saving / standard
12
time, 4 holiday periods, adjustable screen brightness and programming from Smartphone / Tablet.
Menus can be displayed in several languages and show a timetable on screen with the current day’s
schedule.
It has 2 independent and voltage-free switched circuits that allow programming of up to 40 manoeuvres
between channel 1 and/or channel 2.
INSTALLATION
WARNING: Installation and mounting of electrical devices must be carried out by an authorised fitter.
TURN OFF THE POWER SUPPLY PRIOR TO INSTALLATION.
The device is internally protected against interference by a security circuit. However, some particularly
strong fields may alter its functioning. Interference can be avoided if the following installation rules are
taken into account:
— The device must not be installed near inductive loads (engines, transformers, contactors, etc.)
— It is advisable to plan a separate supply line (with a network filter where appropriate).
— The inductive loads must be provided with interference suppressors (varistor, RC filter).
If the time switch is used in combination with other devices in an installation, it should be made sure that
the constituted unit does not generate extraneous disturbances.
RESTORE SUPPLY ONCE THE DEVICE IS FULLY INSTALLED.
MOUNTING
Electronic control device of independent mounting in distribution cabinet, with symmetric profile of 35
mm. in accordance with EN 60715 standard (DIN Rail).
CONNECTION
Connect power according to the diagram in FIG. 2.
Phase and Neutral positions must be respected, checking the connections made. A wrong connection
may destroy the device.
START-UP
THE DEVICE MUST BE POWERED to be able to execute the installation control.
The display will light up and the MAIN screen will appear.
When the device is not powered the display remains turned off, keeping all the date and time
programming, during the power-reserve period (10 years) thanks to the incorporated lithium battery. In
the event of being installed without the battery, the device has a security power-reserve of approx. 48
hours.
With no power supply, press the MENU button, the display temporarily lights to allow programming. If no
button is pressed after 5 seconds, the display will turn off again.
These devices have four keys for their setting and programming.
The display shows the following information:
Timetable with the day’s manoeuvres (it disappears when it gets to a holiday period). A timetable for
each channel with 24 divisions in which each segment represents 1 hour ON.
The display has a text line that will show the following information alternatively:
—
SUNRISE and SUNSET times for that day with associated symbol:
—
Selected city
—
Current date
—
PERMANENT operation
—
Active HOLIDAY period
Complete time
Manual manoeuvre symbol
is PERMANENT the symbol is fixed.
State of C1 / C2 circuits: ON
SETTINGS
ASTRO NOVA CITY switches are factory programmed with the current date and time as follows:
Time:
Zone:
Astronomical corrections:
Change Standard to Daylight Saving:
Change Daylight Saving to Standard:
Holidays:
Programs:
MANUAL OPERATION
Activate or disable, manually reversing the state of the circuits temporarily from the main screen, by
pressing keys ▼ C1 or ▲ C2.
The symbol will appear blinking on screen over the manipulated channel until we press ▼ C1 or ▲ C2
again, returning to the previous state.
PROGRAMMING
Programming is based on menus and submenus through which we can move to program manoeuvres
or adjust the device. The main menu can be accessed from the standby screen pressing the
With keys ▼ and ▲ we will move through the different menus and pressing
go back to the previous menu we press the C key.
The details to be programmed always appear blinking on screen.
ASTRONOMICAL TIME SWITCH
2.
Timetables
4.
Sunrise symbol
6.
Time / Date
8.
Go down the menu / C1 manual
operation
10. Bluetooth dongle connector
12. Accept option / Enter the menu / Turn on
the device without power supply
14. Manual operation (blinking) / Permanent
manual (fixed)
16. Transfer symbol
18. Days of the week
Sun
= SUNRISE / Moon
= SUNSET
. It blinks when a manual switching is activated and if the switching
, OFF
GMT +1
In accordance with commercial order
Disabled
Automatic
Automatic
NO (4 periods disabled)
C1 to C2 On at sunset / C1 and C2 Off at sunrise
(see FIG. 4)
key.
we will access them. To
INSTRUCTIONS FOR USE
Vacations or
holiday program
C1 circuit status
Day of the week
indicator
Current time
Summer time
Time scale
0
3
O N
O FF
1
2
Decrease or move up menu /
3
4
5
6
C1 manual operation
7
C
Go back
C1
DESCRIPTION
The ASTRO NOVA CITY is a time switch designed to control luminous loads in
function of dawn and dusk rimes. It includes a program that automatically adjusts
the dawn lighting-up and dusk switching-off times, without any need for
maintenance. The geographic position location is made by selecting the closest
city to your location from a list of the most important cities in your country.
Its small size of only two modules makes it ideal for installation on boards with little
available space. The unit includes 22 memory spaces in two independent circuits
that can be programmed in an astronomic manner or with fixed times.
INSTALLATION
WARNING: The assembly and installation of the electric apparatus must be
carried out by an authorised installer.
THE ELECTRIC PAOER MUST BE SWITCHED OFF BEFORE COMMENCING
INSTALLATION.
The unit is internally protected against interference by a security circuit. However,
certain especially strong fields could affect correct operation. Interference can be
avoided if the following installation rules are followed:
— The unit must not be installed close to inductive loads
(motors, transformers and contactors etc )
— It is recommended that a separate power line be employed
(fitted with a mains filter if necessary).
— Inductive loads must be fitted with interference suppressors (MOVs, RC filters).
If the time switch is used with other devices in an installation, it will be necessary
to verify that the overall assembly does not generate any parasitic interference.
INSTALLATION: Electronic control device, independently installed in a distribution
cabinet, fitted with 35-mm symmetric profile in accordance with EN 60715 (DIN
rail).
CONNECTION: In accordance with the wiring drawing
C2
4
C1
1
PUTTING INTO SERVICE AND INSTALLATION
All programming sections comply with the following rules:
— The data to be modified s identified by flashing.
i
— Each press of the Δ and ∇ keys increases or decreases the flashing data. If it is
maintained pressed, the increase/decrease speed becomes five units per second.
— After the last data item, confirmation is given by OK or, if no key is pressed within
one minute, the unit returns to normal operation: the screen displays the current
time and the C1 and C2 circuit status.
The dawn and dusk times can be displayed in normal mode by pressing «C», which
shows AST screen, together with current dawn and dusk times.
To install the ASTRO NOVA CITY as an astronomic time switch, it is only
necessary to enter the ZONE MENU, pressing the OK key and selecting the city
closest to the installation and confirm with OK: The CORR screen displays: NO
and the dawn and dusk times (automatically changes from one to another every
five seconds) corresponding to the selected zone. if no corrections are to be
performed, confirm with OK and the switch is programmed with the two circuits
operating in astronomic mode.
ASTRONOMIC TIME SWITCH
ASTRO NOVA CITY
C2 circuit status
Permanet
channel indicator
12-hour
time format
Winter time
Screen
6
9
12
15 18 21
24
Decrease or move down menu /
C2 manual operation
C1
C2
Confirm screen option /
OK
Access menu
C2
MENU
5
6
L
2
3
N
SELECTING LANUGUAGE
Pressing OK enters MENU and with the Δ and ∇ keys select LANGUAGE,
confirming with OK. The Δ and ∇ keys are used to select the desired language,
confirming with OK and returning to the main screen.
ZONE ASSIGNMENT
Pressing OK enters the ZONE MENU, pressing it again enters the city list, the Δ
and ∇ keys are used to select the closest city to the installation zone. Confirm with
OK and the screen displays CORR. NO and the dawn and dusk rimes
alternatively. If the displayed dusk (switch-on) and/or dawn (switch-off) times are to
be modified, «YES» is selected with the Δ and ∇ keys, pressing OK to confirm,
dawn correction is entered and the screen displays CORR. DAWN, the dawn time
and 0:00 in the lower section, which indicates the correction time. Using the Δ and
∇ keys the value is modified increasing or decreasing it up to three hours. Confirm
with OK to display CORR. DUSK and the dusk time, the operation is repeated,
confirmed with OK and returning to the main screen.
PREDEFINED PARAMETERS
The time switch leaves the factory programmed in the country language, set to the
official country date and time, with the zone set to the first alphabetical city to the
list, and 4 pre-established programs.
Program 01: C1 ON DUSK for all days of the week
Program 02: C1 OFF DAWN for all days of the wee k
Program 03: C2 ON DUSK for all days of the week
Program 04: C2 OFF DAWN for all days of the week
on
DUSK
off
C
P1
1
C
P3
2
These programs remain in memory even if a reset is performed.
If any of these programs is not suitable, it can be modified or deleted by pressing
OK and entering the ZONE MENU, selecting PROGRAM MENU with the Δ and ∇
keys and pressing OK again to display PROG 01. The program to be modified or
deleted in selected with the Δ and ∇ keys and OK is pressed. The program
number is displayed onscreen with ENTER (example: PROG:02 ENTER). Again
with the Δ and ∇ keys ENTER is selected if the program is to be modified or
DELETE if it is to be eliminated. If ENTER has been selected, the program to be
modified will be displayed. The Δ and ∇ keys are used to modify and OK to
confirm. If DELETE is selected, once the program has appeared onscreen, OK is
pressed and the program is deleted.
SETTING THE TIME
Pressing OK enters the ZONE MENU and the Δ and ∇ keys are used to select
DATE MENU, confirmed with OK to enter YEAR DATE with the year digits flashing
on the screen and the Δ and ∇ keys are used to change the year value with OK
confirming the entered digits. The MONTH, DAY, DAY OF THE WEEK, TIME and
MINUTES are similarly entered, confirming with OK to enter in ZONE.
CHANGING THE GEOGRAPHIC ZONE
If, once the unit is programmed we wish to change the zone, the dawn or dusk
times, ZONE MENU is entered again and the necessary parameters are changed
in the same way as in the Zone Assignment section.
PROGRAMMING
In normal mode press the OK key to access the ZONE MENU and select
PROGRAM MENU with the Δ and ∇ keys. OK is pressed and PROGRAM PROG
01 is displayed onscreen, if an operation is to be programmed in this program
press OK to display PROG 01 ENTER, press OK again and select the circuit and
the operation to be executed from: C1 ON, C1 OFF, C2 ON and C2 OFF. Confirm
the selection with OK and select the operation type, which may be: Fixed time,
Dawn (DAWN) astronomic time or Dusk (DUSK) astronomic time.
FIXED TIME OPERATION
If fixed time is selected, press OK and enter the hour and minutes, day or days of
the week information in those desired accepting or not, day by day, in those for
which the operation is to be performed, confirming with OK. If, when confirming the
day of the week with the OK key, this is maintained pressed, the operation will be
selected as a holiday, the word HOLIDAYS is displayed onscreen, together with
the symbol » ···· » and confirm with OK, the screen will display PROGRAM PROG
02.
ASTRONOMIC OPERATION
Once the circuit is selected, together with the operation between C1 ON, C1 OFF,
C2 ON and C2 OFF, the type of operation to choose is displayed. The dawn
(DAWN) or dusk (DUSK) operation that is to be performed is selected and the
screen displays the possibility to correct the time for the displayed dawn or dusk
time. If we agree with the screen display the correction is left at zero and the hours
and minutes are confirmed with OK. If it is to corrected by more or less, the
correction time is entered in hours and minutes (up to ± 9 hours and 59 minutes),
automatically displaying the time at which the operation is to be performed, confirm
with OK then select the day or days of the week on which this operation is to be
carried out.
If, on confirming the last day of the week with the OK key, this is maintained
pressed, the operation will be selected as a holiday, the word HOLIDAYS is
displayed onscreen, together with the symbol «
WARNING: If an operation is programmed on a holiday, the HOLIDAYS
program cannot be used and is removed from the menu remaining as a
HOLIDAY period.
If astronomic (dawn — dusk) operations are programmed in the same circuit and
fixed time, they could overlap since astronomic operations move forward and
backward during the year and could lead to incorrect operations.
For example: A shop window lights are to be switched on at nightfall (astronomic
operation) and are to be switched off again at 21:30 (fixed time operation). Since
the astronomic switch-on operation is moved forward during summer, there will be
a time when dusk will fall after 21:30 and the switch-on will occur after the
programmed switch-off time so that no actual switch-off will occur and the lights
will remain on until another switch-off command.
Night period
DAWN
P2
PREDEFINED
OPERATIONS
P4
«.
На чтение 8 мин Просмотров 18 Опубликовано Обновлено
Содержание
- Реле времени астрономическое Orbis ASTRO NOVA CITY OB178012
- Технические характеристики Orbis ASTRO NOVA CITY OB178012
- Преимущества Orbis ASTRO NOVA CITY OB178012
- Этот товар из подборок
- Информация об упаковке
- Сервисное обслуживание
- ASTRO NOVA CITY BLUETOOTH
- Integrated bidirectional Bluetooth communication for programming and reading on a smart phone Fixed or astronomical operations (dawn and dusk) Removable front battery Backlit screen for best display, even in the dark
- Таймер ORBIS ASTRO NOVA CITY OB178012
- Таймер астрономический ASTRO NOVA CITY ORBIS OB178012
- Условия поставки таймера астрономического ASTRO NOVA CITY ORBIS OB178012
- ASTRO NOVA CITY BLUETOOTH
- Integrated bidirectional Bluetooth communication for programming and reading on a smart phone Fixed or astronomical operations (dawn and dusk) Removable front battery Backlit screen for best display, even in the dark
Реле времени астрономическое Orbis ASTRO NOVA CITY OB178012
- Тип: астрономический
- Номинальное напряжение: 220 (230) В
- Номинальный ток: 32 А
- Max подключаемая мощность: 3 кВт
- Принцип работы: электронный
Все характеристики
Цена за упаковку 3 шт.: 22 839 р.
Цена за ед. товара: 7 613 р. 8249 р.
Спишите до 3300 р. бонусами Начислим 82 бонуса
Астрономическое реле времени Orbis ASTRO NOVA CITY OB178012 данное устройство используется для контроля уличного освещения, подсветки витрин, реклам, фонтанов. Данный таймер настраивается автоматически каждые сутки на час заката и за час рассвета. Устройство учитывает зимнее и летнее время, а также географическое положение. Большой дисплей подсвечивается.
Дополнительные технические характеристики:
- Сохранение настроек при отключении электричества — есть.
- Сохранение настроек при выключении таймера — есть.
Технические характеристики Orbis ASTRO NOVA CITY OB178012
Преимущества Orbis ASTRO NOVA CITY OB178012
- Номинальное напряжение:120/230 Vac, 12, 24 или 48 Vac/dc;
- Частота: 50-60 Hz;
- Коммутируемая нагрузка: 2 x 16 (10) / 250 Vac;
- Рекомендуемая нагрузка: лампы накаливания: 3000 W, флуоресцентные: 1200 VA, галогенные (12 V): 2000 VA, галогенные (230 V): 3000 W, энергосберегающие: 600 VA, DOWNLIGHTS: 400 VA, LED: 600 VA;
- Резерв питания: заменяемая батарея на 10 лет;
- Точность хода: ± 1 с/день при 23º C;
- Ячейки памяти: 40;
- Тип срабатывания: 1B, 1S, 1T, и 1U;
- Погрешность срабатывания: до секунды;
- Ручное управление: ON/OFF/программа;
- Потребляемая мощность: 6 VA;
- Тип контакта: AgSnO2;
- Рабочая температура: -10ºC до +45ºC;
- Класс защиты: II при правильном монтаже;
- Тип защиты: IP 20 согласно EN 60529;
- Монтаж астрономического реле времени Orbis ASTRO NOVA CITY OB178012 осуществляется на DIN-рейку согласно EN 60715;
- Большой дисплей;
- Автоматический переход зима/лето;
- Счетчик часов;
- Подсветка дисплея;
- Запас хода на 10 лет;
- Поддержка bluetooth.
- *Производитель оставляет за собой право без уведомления дилера менять характеристики, внешний вид, комплектацию товара и место его производства. Указанная информация не является публичной офертой
Нашли ошибку в описании?
Этот товар из подборок
Информация об упаковке
Сервисное обслуживание
Поможем решить любую проблему с товаром
Устраним любую неисправность по гарантии. Срок указан без учета логистики
Обращайтесь за обслуживанием в авторизованные сервисы производителя
Источник
ASTRO NOVA CITY BLUETOOTH
- Integrated bidirectional Bluetooth communication for programming and reading on a smart phone
- Fixed or astronomical operations (dawn and dusk)
- Removable front battery
- Backlit screen for best display, even in the dark
Accessories / Options available:
- Astronomical timed switch with daily updating and simple guided programming using text menus.
- Bluetooth communication for programming on a smart phone.
- Two switched contacts.
- Up to 40 daily or weekly programs
- Fixed or astronomical operations (dawn and dusk).
- Adjustable correction of astronomical timetable of up to ± 9 hours, 59 minutes.
- REDUC function to avoid overlap between fixed and astronomical operations.
- Large back-lit display with contrast adjustment.
- On-screen chronogram of functioning.
- Has 4 periods between two dates with special programs, which practically makes it a yearly timer switch.
- Manual activation or deactivation, temporary or permanent.
- Automatic daylight savings changes according to country or desactivate.
- Simple guided programming using text menus in different languages.
- Contact operating hours counter.
- Keyboard blocking using password.
- Replaceable reserve battery of up to 4 years.
- Transparent seal-able window to avoid unauthorised changes.
- Street and ornamental lighting.
- Illuminated signs, shop windows, monuments, fountains, gardens…
- Models
-
- Model: ASTRO NOVA CITY BLUETOOTH 230 V ac
- Astronomical timed switch with daily updating and simple guided programming using text menus.
- Bluetooth communication for programming on a smart phone.
- Two switched contacts.
- Up to 40 daily or weekly programs
- Fixed or astronomical operations (dawn and dusk).
- Adjustable correction of astronomical timetable of up to ± 9 hours, 59 minutes.
- REDUC function to avoid overlap between fixed and astronomical operations.
- Large back-lit display with contrast adjustment.
- On-screen chronogram of functioning.
- Has 4 periods between two dates with special programs, which practically makes it a yearly timer switch.
- Manual activation or deactivation, temporary or permanent.
- Automatic daylight savings changes according to country or desactivate.
- Simple guided programming using text menus in different languages.
- Contact operating hours counter.
- Keyboard blocking using password.
- Replaceable reserve battery of up to 4 years.
- Transparent seal-able window to avoid unauthorised changes.
- Street and ornamental lighting.
- Illuminated signs, shop windows, monuments, fountains, gardens…
-
- Model: ASTRO NOVA CITY BLUETOOTH 230 V ac
- Integrated bidirectional Bluetooth communication for programming and reading on a smart phone
- Fixed or astronomical operations (dawn and dusk)
- Removable front battery
- Backlit screen for best display, even in the dark
- Astronomical timed switch with daily updating and simple guided programming using text menus.
- Bluetooth communication for programming on a smart phone.
- Two switched contacts.
- Up to 40 daily or weekly programs
- Fixed or astronomical operations (dawn and dusk).
- Adjustable correction of astronomical timetable of up to ± 9 hours, 59 minutes.
- REDUC function to avoid overlap between fixed and astronomical operations.
- Large back-lit display with contrast adjustment.
- On-screen chronogram of functioning.
- Has 4 periods between two dates with special programs, which practically makes it a yearly timer switch.
- Manual activation or deactivation, temporary or permanent.
- Automatic daylight savings changes according to country or desactivate.
- Simple guided programming using text menus in different languages.
- Contact operating hours counter.
- Keyboard blocking using password.
- Replaceable reserve battery of up to 4 years.
- Transparent seal-able window to avoid unauthorised changes.
- Street and ornamental lighting.
- Illuminated signs, shop windows, monuments, fountains, gardens…
-
- Model: ASTRO NOVA CITY BLUETOOTH 230 V ac
- Astronomical timed switch with daily updating and simple guided programming using text menus.
- Bluetooth communication for programming on a smart phone.
- Two switched contacts.
- Up to 40 daily or weekly programs
- Fixed or astronomical operations (dawn and dusk).
- Adjustable correction of astronomical timetable of up to ± 9 hours, 59 minutes.
- REDUC function to avoid overlap between fixed and astronomical operations.
- Large back-lit display with contrast adjustment.
- On-screen chronogram of functioning.
- Has 4 periods between two dates with special programs, which practically makes it a yearly timer switch.
- Manual activation or deactivation, temporary or permanent.
- Automatic daylight savings changes according to country or desactivate.
- Simple guided programming using text menus in different languages.
- Contact operating hours counter.
- Keyboard blocking using password.
- Replaceable reserve battery of up to 4 years.
- Transparent seal-able window to avoid unauthorised changes.
- Street and ornamental lighting.
- Illuminated signs, shop windows, monuments, fountains, gardens…
-
- Model: ASTRO NOVA CITY BLUETOOTH 230 V ac
Источник
- Models
Источник
Таймер ORBIS ASTRO NOVA CITY OB178012
Регистрируйтесь на сайте и получайте специальные цены уже с первой покупки!
Данный товар доставляется
по предоплате.Макс. подключаемая мощность
Макс. число включений в сутки
Степень защиты от пыли и влаги
36 мес.
Вес брутто 0.1 кг Тип таймер Макс. подключаемая мощность 3000 Вт Макс. число включений в сутки 40 Степень защиты от пыли и влаги IP 20 Инструкция Таймер ORBIS ASTRO NOVA CITY астрономический на DIN-рейку 3кВт
Астрономический таймер ORBIS ASTRO NOVA CITY предназначен для контроля уличного освещения, подсветок, витрин, рекламы, фонтанов, зданий и т.д. Установка времени происходит с помощью ввода географической координаты (широты) или ввода города.
Техническая информация
Номинальное напряжение
120/230 VacЧастота 50-60 Hz
Коммутируемая нагрузка 2 x 16 (10) / 250 Vac
Рекомендуемая нагрузка :Лампы накаливания: 3000 W
Флуоресцентные: 1200 VA
Галогеновые (12 V): 2000 VA
Галогеновые (230 V): 3000 W
Энергосберегающие: 600 VA
DOWNLIGHTS: 400 VA
LED: 600 VA
Резерв питания Заменяемая батарея на 10 лет
Точность хода ± 1 с/день при 23? C
Ячейки памяти 40
Тип срабатывания Типы 1B, 1S, 1T, и 1U
Погрешность срабатывания до секунды
Ручное управление ON/OFF/Программа
Потребляемая мощность 6 VA
Тип контакта AgSnO2
Рабочая температура -10?C до +45?C
Класс защиты II при правильном монтаже
Тип защиты IP 20 согласно EN 60529
Монтаж DIN-рейка согласно EN 60715
Артикул OB178012Цена на сайте действует только при оформлении заказа через интернет-магазин и может отличаться от цены в магазинах
Источник
Таймер астрономический ASTRO NOVA CITY ORBIS OB178012
Наименование Наличие Цена
опт с НДСДата
обновленияДобавить
в корзинуСрок
поставкиТаймер астрономический ASTRO NOVA CITY — OB178012 796 7 357.66 р. 13.02.2022 От 1 дня Таймер астрономический ASTRO NOVA CITY ORBIS OB178012 2 7 912.27 р. 13.02.2022 От 1 дня . . . . . . . . . . Условия поставки таймера астрономического ASTRO NOVA CITY ORBIS OB178012
Купить таймеры астрономические ASTRO NOVA CITY ORBIS OB178012 могут физические и юридические лица, по безналичному и наличному расчету, отгрузка производится с пункта выдачи на следующий день после поступления оплаты.
Цена таймера астрономического ASTRO NOVA CITY ORBIS OB178012 зависит от общей суммы заказа, на сайте указана оптовая цена.
Доставим таймер астрономического ASTRO NOVA CITY ORBIS OB178012 на следующий день после оплаты, по Москве и в радиусе 200 км от МКАД, в другие регионы РФ отгружаем транспортными компаниями.
Источник
ASTRO NOVA CITY BLUETOOTH
Accessories / Options available:
- Models
- Models