-
Bookmarks
Quick Links
User’s Manual
AL7000 is intended to measure alcohol in human breath. Readings obtained by this device are used in the
diagnosis of alcohol intoxication.
The accuracy of this device has been established at a Blood Alcohol Concentration of 0.000and0.400%BAC.
Accuracy testing was completed according to DOT regulations.
The AlcoScan Model AL7000 analyzes a breath sample to detect alcohol in the lungs.
This reading is then converted to blood alcohol concentration (BAC).
AL7000 uses an advanced oxide semiconductor sensor to detect alcohol.
…………………………………………………………………………………………………………………………
Specifications
Method of Measure
Breath sample to BAC
Range
0.000% to 0.400%BAC or 0.000‰ to 4.000‰ or 0.000mg/l to 2.000mg/lBrAC
Accuracy
+/-0.01%BAC up to 0.10% BAC
Sensor
Oxide semiconductor
Power
Two 1.5V AA alkaline batteries (included)
Testing Capacity
Approx. 100~200 with new batteries
Operating Temperature 10 – 40 degrees Celsius
Warm Up
Less than 1 minute
Display
3-digit LCD
Size (mm)
105(height) X 50(width) X 18(thickness)
Weight
98g
Sensor Modules
Sensor modules should be replaced approx. 300 tests,
or if damaged by improper testing or handling
Summary of Contents for Alcoscan AL7000
File Specifications:1038/1038372-al7000.pdf file (08 Jul 2023) |
Accompanying Data:
Alcoscan AL7000 Test Equipment PDF Operation & User’s Manual (Updated: Saturday 8th of July 2023 04:45:57 PM)
Rating: 4.4 (rated by 20 users)
Compatible devices: AL3500, ACE EASY AL5500, AL4000, AL9000, BS-200XW, AL8800 BT, ACE III, PRO-TEST 40.
Recommended Documentation:
Operation & User’s Manual (Text Version):
(Ocr-Read Summary of Contents of some pages of the Alcoscan AL7000 Document (Main Content), UPD: 08 July 2023)
-
Alcoscan AL7000 User Manual
-
Alcoscan AL7000 User Guide
-
Alcoscan AL7000 PDF Manual
-
Alcoscan AL7000 Owner’s Manuals
Recommended: Screen Eye X, MS3650C, ADY080112, Mini-Hopper 85A, 611800
Links & Tools
-
INSTRUCTION MANUAL CD97 TDS Tester www.milwaukeeinst.com OPERATING • Remove the protection cap. • Turn the CD97 on with the ON/OFF switch located on the top. • Immerse into solution up to the maximum immersion level without touching the bottom of the beaker. • Stir gently and wait until the …
CD97 1
-
M200 Automatic ID Purge Control User InstructionsKit contents:■ Pressure sensor assembly with 1/4 in. connections■ Wire harness 19.7 ft (6 m) in length■ PFA tubing 15 ft (4.5 m) in length■ Swagelok 1/4 in. tee with PFA tubing■ 2 Keyed 1/4 in. QC series quick-connects, 1 standard 1/4 in. QC serie …
M200 32
-
Product Fact SheetEngineered for the BEST signal visibilityAgilent InfiniiVision 7000B Series OscilloscopesKey specifications Bandwidth 100 MHz, 350 MHz, 500 MHz, and 1 GHz modelsChannels 2-ch, 4-ch, 2-ch + 16 digital, 4-ch + 16 digitalSample rate 2 GSa/s (100 MHz to 350 MHz), 4 GSa/s (500 MHz to 1 GHz)Mem …
InfiniiVision 7000B Series 2
-
12LIMITED ONE YEAR WARRANTYSATISFACTION GUARANTEED#9101 LIGHT RANGER MUTT® Mobile Universal Trailer TesterInnovative Products of America® Incorporated has established a Limited One Year Warranty Policy for the Light Ranger MUTT® #9101, not including any wearable parts, i.e., clips, etc.One Year L …
9101 6
Operating Impressions, Questions and Answers:
Table of Contents for Alcoscan Ace AL7000:
-
Hinweise zum Batteriegesetz (BattG): Das Gerät, auf das sich diese Bedienungsanleitung bezieht, enthält im Auslieferungszustand zwei Stück AA Alkaline-Batterien (1.5 V). Diese Batterien sind nicht dazu bestimmt, wieder aufgeladen zu werden. Der Versuch der Wiederaufladung kann Sach- und Personen- schäden nach sich ziehen. Auch ist die Verwendung von aufladbaren Batterien im Gerät nicht möglich, da sonst Schaden am Gerät entsteht. Sind die Batterien leer, dürfen Sie nicht in den Hausmüll. Altbatterien enthalten möglicherweise Schadstoffe, die
Questions, Opinions and Exploitation Impressions:
You can ask a question, express your opinion or share our experience of Alcoscan Ace AL7000 device using right now.
…………………………………………………………………………………………………………………………
How to use
Press the Power
Switch.
*. If you press and hold the Power Switch, you can check the accumulated total test counts.
…………………………………………………………………………………………………………………………
AL7000 is the breathalyzer that features Pre-Calibrated Alcohol Sensor Modules to eliminate the need for
recalibration.
Just snap out, snap in and you’re ready to go!
Sensor Module Replacement
Please take the following steps to install new sensor module.
You can see the
Open the sensor
sensor module.
cover.
Warm up.
Blowing through
The mouthpiece
Into the unit for
4 seconds until
beep twice.
Take off PCB.
The result is
Displayed for
15 seconds.
(★ You have to turn off the power first)
Replace the new
Make sure the
sensor module into
module is
original position.
connected tightly.
Automatically
turning off.
Close the sensor
cover then test.
Предложите, как улучшить StudyLib
(Для жалоб на нарушения авторских прав, используйте
другую форму
)
Ваш е-мэйл
Заполните, если хотите получить ответ
Оцените наш проект
1
2
3
4
5